Refine
Has Fulltext
- no (145)
Year of publication
Document Type
- Article (145) (remove)
Keywords
- Hinweisreize (2)
- Industry 4.0 (2)
- JSP (2)
- Simulation (2)
- assessment (2)
- intentional forgetting (2)
- learning factories (2)
- learning factory (2)
- AI and business informatics (1)
- AI-based decision support system (1)
Institute
Wissen erfolgreich managen
(2007)
Willentliches Vergessen
(2019)
Dieser Beitrag im Journal Gruppe. Interaktion. Organisation. stellt dar, wie willentliches Vergessen die Anpassung an notwendige Veränderungen für Individuen, Gruppen und Organisationen verbessert und wie willentliches Vergessen bewusst und gezielt gestaltet werden kann.
Damit Verhalten in Folge einer notwendigen Veränderung angepasst wird, reicht es nicht aus, dass Menschen wissen was zu tun ist, willens und in der Lage sind ihr Verhalten zu verändern. Eine Veränderung gelingt nur dann, wenn nur noch das neue Verhalten zur Anwendung kommt und nicht mehr das Alte, wenn das alte Verhalten vergessen wird. Der notwendige Prozess des willentlichen Vergessens ist durch Entfernen von Hinweisreizen, die die Erinnerung des zu Vergessenden und durch Platzierung von Hinweisreizen, die die Aktivierung des Neuen auslösen, gestaltbar.
Der vorliegende Beitrag stellt die förderliche Wirkung von Hinweisreizen auf willentliches Vergessen dar, stellt sie im Rahmen des Berichts einer experimentellen Studie unter Beweis und gibt praktische Implikationen, wie für Individuen, Gruppen und Organisationen willentliches Vergessen gestaltet werden kann.
In the copyright industries of the 21st century, metadata is the grease required to make the engine of copyright run smoothly and powerfully for the benefit of creators, copyright industries and users alike. However, metadata is difficult to acquire and even more difficult to keep up to date as the rights in content are mostly multi-layered, fragmented, international and volatile. This article explores the idea of a neutral metadata search and enhancement tool that could constitute a buffer to safeguard the interests of the various proprietary database owners and avoid the shortcomings of centralised databases.
Umstieg auf S/4HANA
(2023)
Sehr viele langjährige R/3-Nutzer stehen derzeit vor der Frage, wie sie sich hinsichtlich des Upgrades auf S/4HANA entscheiden sollen. Die Wartung für R/3 endet absehbar in den nächsten Jahren, und mit S/4 kommen neue Möglichkeiten, aber auch neue Herausforderungen. Dieser Beitrag beschreibt die Entscheidungen, die bei der Prüfung eines Umstiegs auf S/4HANA getroffen werden müssen und zeigt diese am Beispiel eines Multi-Channel-Handelsunternehmens.
Trends in der ERP Branche
(2017)
Terminology is a critical instrument for each researcher. Different terminologies for the same research object may arise in different research communities. By this inconsistency, many synergistic effects get lost. Theories and models will be more understandable and reusable if a common terminology is applied. This paper examines the terminological (in)consistence for the research field of job-shop scheduling by a literature review. There is an enormous variety in the choice of terms and mathematical notation for the same concept. The comparability, reusability and combinability of scheduling methods is unnecessarily hampered by the arbitrary use of homonyms and synonyms. The acceptance in the community of used variables and notation forms is shown by means of a compliance quotient. This is proven by the evaluation of 240 scientific publications on planning methods.
Künstliche Intelligenz ist in aller Munde. Immer mehr Anwendungsbereiche werden durch die Auswertung von vorliegenden Daten mit Algorithmen und Frameworks z.B. des Maschinellen Lernens erschlossen. Dieses Buch hat das Ziel, einen Überblick über gegenwärtig vorhandene Lösungen zu geben und darüber hinaus konkrete Hilfestellung bei der Auswahl von Algorithmen oder Tools bei spezifischen Problemstellungen zu bieten. Um diesem Anspruch gerecht zu werden, wurden 90 Lösungen mittels einer systematischen Literaturrecherche und Praxissuche identifiziert sowie anschließend klassifiziert. Mit Hilfe dieses Buches gelingt es, schnell die notwendigen Grundlagen zu verstehen, gängige Anwendungsgebiete zu identifizieren und den Prozess zur Auswahl eines passenden ML-Tools für das eigene Projekt systematisch zu meistern.
Purpose
The purpose of this study was to investigate work-related adaptive performance from a longitudinal process perspective. This paper clustered specific behavioral patterns following the introduction of a change and related them to retentivity as an individual cognitive ability. In addition, this paper investigated whether the occurrence of adaptation errors varied depending on the type of change content.
Design/methodology/approach
Data from 35 participants collected in the simulated manufacturing environment of a Research and Application Center Industry 4.0 (RACI) were analyzed. The participants were required to learn and train a manufacturing process in the RACI and through an online training program. At a second measurement point in the RACI, specific manufacturing steps were subject to change and participants had to adapt their task execution. Adaptive performance was evaluated by counting the adaptation errors.
Findings
The participants showed one of the following behavioral patterns: (1) no adaptation errors, (2) few adaptation errors, (3) repeated adaptation errors regarding the same actions, or (4) many adaptation errors distributed over many different actions. The latter ones had a very low retentivity compared to the other groups. Most of the adaptation errors were made when new actions were added to the manufacturing process.
Originality/value
Our study adds empirical research on adaptive performance and its underlying processes. It contributes to a detailed understanding of different behaviors in change situations and derives implications for organizational change management.
This paper shows the KMDL Knowledge Management Approach which is based on the SECI and ba model by Nonaka and Takeuchi and the KMDL Knowledge modeling language. The approach illustrates the creation of knowledge with the focus on the knowledge conversions by Nonaka and Takeuchi. Furthermore, it emphasizes the quality of knowledge being embodied in persons and creates a personalization and socialization strategy which integrates business process modeling, skill management and the selection of knowledge management systems. The paper describes the theoretical foundations of the approach and practical effects which have been seen in the use of this approach.
Purpose
With shorter product cycles and a growing number of knowledge-intensive business processes, time consumption is a highly relevant target factor in measuring the performance of contemporary business processes. This research aims to extend prior research on the effects of knowledge transfer velocity at the individual level by considering the effect of complexity, stickiness, competencies, and further demographic factors on knowledge-intensive business processes at the conversion-specific levels.
Design/methodology/approach
We empirically assess the impact of situation-dependent knowledge transfer velocities on time consumption in teams and individuals. Further, we issue the demographic effect on this relationship. We study a sample of 178 experiments of project teams and individuals applying ordinary least squares (OLS) for regression analysis-based modeling.
Findings
The authors find that time consumed at knowledge transfers is negatively associated with the complexity of tasks. Moreover, competence among team members has a complementary effect on this relationship and stickiness retards knowledge transfers. Thus, while demographic factors urgently need to be considered for effective and speedy knowledge transfers, these influencing factors should be addressed on a conversion-specific basis so that some tasks are realized in teams best while others are not. Guidelines and interventions are derived to identify best task realization variants, so that process performance is improved by a new kind of process improvement method.
Research limitations/implications
This study establishes empirically the importance of conversion-specific influence factors and demographic factors as drivers of high knowledge transfer velocities in teams and among individuals. The contribution connects the field of knowledge management to important streams in the wider business literature: process improvement, management of knowledge resources, design of information systems, etc. Whereas the model is highly bound to the experiment tasks, it has high explanatory power and high generalizability to other contexts.
Practical implications
Team managers should take care to allow the optimal knowledge transfer situation within the team. This is particularly important when knowledge sharing is central, e.g. in product development and consulting processes. If this is not possible, interventions should be applied to the individual knowledge transfer situation to improve knowledge transfers among team members.
Social implications
Faster and more effective knowledge transfers improve the performance of both commercial and non-commercial organizations. As nowadays, the individual is faced with time pressure to finalize tasks, the deliberated increase of knowledge transfer velocity is a core capability to realize this goal. Quantitative knowledge transfer models result in more reliable predictions about the duration of knowledge transfers. These allow the target-oriented modification of knowledge transfer situations so that processes speed up, private firms are more competitive and public services are faster to citizens.
Originality/value
Time consumption is an increasingly relevant factor in contemporary business but so far not been explored in experiments at all. This study extends current knowledge by considering quantitative effects on knowledge velocity and improved knowledge transfers.
In response to the impending spread of COVID-19, universities worldwide abruptly stopped face-to-face teaching and switched to technology-mediated teaching. As a result, the use of technology in the learning processes of students of different disciplines became essential and the only way to teach, communicate and collaborate for months. In this crisis context, we conducted a longitudinal study in four German universities, in which we collected a total of 875 responses from students of information systems and music and arts at four points in time during the spring–summer 2020 semester. Our study focused on (1) the students’ acceptance of technology-mediated learning, (2) any change in this acceptance during the semester and (3) the differences in acceptance between the two disciplines. We applied the Technology Acceptance Model and were able to validate it for the extreme situation of the COVID-19 pandemic. We extended the model with three new variables (time flexibility, learning flexibility and social isolation) that influenced the construct of perceived usefulness. Furthermore, we detected differences between the disciplines and over time. In this paper, we present and discuss our study’s results and derive short- and long-term implications for science and practice.
In Organisationen mit mehreren hundert oder mehr Mitarbeitern ist es kaum möglich, einen Überblick über die Kompetenzen und Spezialkenntnisse von Beschäftigten zu behalten. Die Suche nach Fachleuten gestaltet sich dann oft schwierig, zum Beispiel wenn ein Projektteam zusammengestellt werden soll. Hilfe versprechen Skill- Management-Systeme, vorausgesetzt, ihre Datenbank wurde sinnvoll eingerichtet und wird laufend aktualisiert. Die Autoren beschreiben Aufbau und Struktur derartiger Systeme, fragen nach ihren kosten und nennen Kriterien für professionelle Lösungen.
Skill management catalogues built via KMDL : integrating knowledge and business process modelling
(2004)
The efficient use of human capital is one of the most important factors in todays' business competition. Competition is strongly influenced by qualified staff. In order to aid the human resources department to keep up with strategic decisions various skill management systems have been created that make the development of human resources easier and more precise. Skill management systems are only as good as the information that they are based on. The mostly used basic information is the skill catalogue which shows the gaps of each employee or division within the company. But there are nearly no applicable methods yet to create such a catalogue thoroughly. This paper introduces a reasonable approach to create such a catalogue with the description language for knowledge-intensive processes KMDL. The skill catalogue built for skill management systems is one of the most important but still most neglected factors when introducing skill management.
Skill Management
(2006)
The usage of gamification in the contexts of commerce, consumption, innovation or eLearning in schools and universities has been extensively researched. However, the potentials of serious games to transfer and perpetuate knowledge and action patterns in learning factories have not been levered so far. The goal of this paper is to introduce a serious game as an instrument for knowledge transfer and perpetuation. Therefore, reqirements towards serious games in the context of learning factories are pointed out. As a result, that builds on these requirements, a serious learning game for the topic of Industry 4.0 is practically designed and evaluated.
Adaptability of information systems has become a substantial competition factor. Today's insufficient methodical support for the realization of adaptability frequently leads to unused potentials of deployed information technology in enterprises. In this contribution a procedure is presented, which addresses the demand to determine the necessary adaptability of an enterprise related to its surrounding environmental environment.
Robotic Process Automation (RPA) steht für die softwareunterstützte Bedienung von Softwarelösungen über deren Benutzeroberfläche. Das primäre Ziel, das mit RPA erreicht werden soll, ist die automatisierte Ausführung von Routineaufgaben, die bisher einen menschlichen Eingriff erforderten. Das Potenzial von RPA, Prozesse langfristig zu verbessern, ist allerdings stark begrenzt. Die Automatisierung von Prozessen und die Überbrückung von Medienbrüchen auf der Front-End-Ebene führt zu einer Vielzahl von Abhängigkeiten und Bedingungen, die in diesem Beitrag zusammengefasst werden. Der Weg zu einer nachhaltigen Unternehmensarchitektur (bestehend aus Prozessen und Systemen) erfordert offene, adaptive Systeme mit moderner Architektur, die sich durch ein hohes Maß an Interoperabilität auf verschiedenen Ebenen auszeichnen.
Requirements for an integration of methods analyzing social issues in knowledge organizations
(2006)
Knowledge is more and more a key factor within companies [10]. Nearly 40 percent of all employees are so called 'knowledge workers'. Distribution and inquest of knowledge within companies are supported by skill management systems. Although not all aspects and potentials of this instrument are yet utilized skill management systems have spread widely within business organizations. This paper summarizes the requirements, scopes and problems for skill management system within the company.
Die Herstellung von Produkten bindet Energie sowie auch materielle Ressourcen. Viel zu langsam entwickeln sich sowohl das Bewusstsein der Konsumenten sowie der Produzenten als auch gesetzgebende Aktivitäten, um zu einem nachhaltigen Umgang mit den zur Verfügung stehenden Ressourcen zu gelangen. In diesem Beitrag wird ein lokaler Remanufacturing-Ansatz vorgestellt, der es ermöglicht, den Ressourcenverbrauch zu reduzieren, lokale Unternehmen zu fördern und effiziente Lösungen für die regionale Wieder- und Weiterverwendung von Gütern anzubieten.
The implementation of learning scenarios is a diversely challenging, frequently purely manual and effortful undertaking. In this contribution a process based view is used in scenario generation to overcome communication, coordination and technical gaps. A framework is provided to identify, define and integrate technological artefacts and learning content as modular, reusable building blocks along a modeled production process. The specific contribution is twofold: 1) the theoretical framework represents a unique basis for modularization of content and technology in order to enhance reusability, 2) the model based scenario definition is a starting point for automated implementation of learning scenarios in industrial learning environments that has not been created before.
Die Bedeutung der Zulieferer für die Automobilhersteller wächst stetig, weil die Zulieferer immer stärker in den gesamten Wertschöpfungsprozess des Herstellers eingebunden werden und somit ständig Planung, Qualität und Logistikabläufe optimiert werden müssen. Betriebliche Anwendungen, wie Enterprise Resource Planning- (ERP-) oder Produktionsplanung- und -steuerungs- (PPS-) Systeme werden benötigt, um den störungsfreien und reibungslosen Ablauf der Geschäftsprozesse und damit die ständige Lieferfähigkeit gegenüber dem Automobilhersteller zu garantieren [1]. Anhand eines Marktüberblicks werden in diesem Beitrag innovative Ansätze, Möglichkeiten und Koordinationsmechanismen zur Unterstützung der Produktion in verteilten Standorten von aktuellen ERP-/PPS-Systemen vorgestellt.
CO₂-Fußabdrücke sind ein aktuell viel diskutiertes Thema mit weitreichenden Implikationen für Individuen als auch Unternehmen. Firmen können einen proaktiven Beitrag zur Transparenz leisten, indem der unternehmens- oder produktbezogene CO₂-Fußabdruck ausgewiesen wird. Ist der Entschluss gefasst einen CO₂-Fußabdruck auszuweisen und die entstehenden Treibhausgase zu erfassen, existiert eine Vielzahl unterschiedlicher Normen und Zertifikate, wie die publicly available specification 2050, das Greenhouse Gas Protokoll oder die ISO 14067. Das Ziel dieses Beitrags ist es, diese drei Normen zur Berechnung des produktbezogenen CO₂-Fußabdrucks zu vergleichen, um Gemeinsamkeiten und Unterschiede sowie Vor- und Nachteile in der Anwendung aufzuzeigen. Die Übersicht soll Unternehmen bei der Entscheidungsfindung hinsichtlich der Eignung eines CO₂-Fußabdrucks für ihr Unternehmen unterstützen.
Nowadays, production planning and control must cope with mass customization, increased fluctuations in demand, and high competition pressures. Despite prevailing market risks, planning accuracy and increased adaptability in the event of disruptions or failures must be ensured, while simultaneously optimizing key process indicators. To manage that complex task, neural networks that can process large quantities of high-dimensional data in real time have been widely adopted in recent years. Although these are already extensively deployed in production systems, a systematic review of applications and implemented agent embeddings and architectures has not yet been conducted. The main contribution of this paper is to provide researchers and practitioners with an overview of applications and applied embeddings and to motivate further research in neural agent-based production. Findings indicate that neural agents are not only deployed in diverse applications, but are also increasingly implemented in multi-agent environments or in combination with conventional methods — leveraging performances compared to benchmarks and reducing dependence on human experience. This not only implies a more sophisticated focus on distributed production resources, but also broadening the perspective from a local to a global scale. Nevertheless, future research must further increase scalability and reproducibility to guarantee a simplified transfer of results to reality.
The development of new and better optimization and approximation methods for Job Shop Scheduling Problems (JSP) uses simulations to compare their performance. The test data required for this has an uncertain influence on the simulation results, because the feasable search space can be changed drastically by small variations of the initial problem model. Methods could benefit from this to varying degrees. This speaks in favor of defining standardized and reusable test data for JSP problem classes, which in turn requires a systematic describability of the test data in order to be able to compile problem adequate data sets. This article looks at the test data used for comparing methods by literature review. It also shows how and why the differences in test data have to be taken into account. From this, corresponding challenges are derived which the management of test data must face in the context of JSP research.
Der vorliegende Beitrag gibt eine Einführung in die Analyse und Optimierung wissensintensiver Geschäftsprozesse. Dazu wird die Modellierungsmethodik KMDL® vorgestellt und ein Szenario ihrer Anwendung auf wissensintensive Prozesse im Finanzdienstleistungssektor entworfen. Dies wird exemplarisch am Dienstleistungsentwicklungsprozess sowie am Kundenberatungsprozess demonstriert. Dabei werden für beide Prozesse durch den Einsatz der KMDL® erkennbare Potenzialfelder aufgezeigt und Handlungsempfehlungen entworfen.