Refine
Has Fulltext
- no (138)
Year of publication
Document Type
- Article (136)
- Monograph/Edited Volume (2)
Language
- English (138) (remove)
Is part of the Bibliography
- yes (138) (remove)
Keywords
- Detector modelling and simulations II (electric fields, charge transport, multiplication and induction, pulse formation, electron emission, etc) (1)
- Energy-dispersive Laue diffraction (1)
- Interaction of radiation with matter (1)
- Solid state detectors (1)
- X-ray imaging (1)
- X-ray spectroscopy (1)
- pnCCD (1)
Institute
- Institut für Physik und Astronomie (138) (remove)
A crystal of hen egg-white lysozyme was analyzed by means of energy-dispersive X-ray Laue diffraction with white synchrotron radiation at 2.7 angstrom resolution using a pnCCD detector. From Laue spots measured in a single exposure of the arbitrarily oriented crystal, the lattice constants of the tetragonal unit cell could be extracted with an accuracy of about 2.5%. Scanning across the sample surface, Laue images with split reflections were recorded at various positions. The corresponding diffraction patterns were generated by two crystalline domains with a tilt of about 1 degrees relative to each other. The obtained results demonstrate the potential of the pnCCD for fast X-ray screening of crystals of macromolecules or proteins prior to conventional X-ray structure analysis. The described experiment can be automatized to quantitatively characterize imperfect single crystals or polycrystals.
A new approach to achieve sub-pixel spatial resolution in a pnCCD detector with 75 x 75 mu m(2) pixel size is proposed for X-ray applications in single photon counting mode. The approach considers the energy dependence of the charge cloud created by a single photon and its split probabilities between neighboring pixels of the detector based on a rectangular model for the charge cloud density. For cases where the charge of this cloud becomes distributed over three or four pixels the center position of photon impact can be reconstructed with a precision better than 2 mu m. The predicted charge cloud sizes are tested at selected X-ray fluorescence lines emitting energies between 6.4 keV and 17.4 keV and forming charge clouds with size (rms) varying between 8 mu m and 10 mu m respectively. The 2 mu m enhanced spatial resolution of the pnCCD is verified by means of an x-ray transmission experiment throughout an optical grating.
In this work we study the response of a pnCCD by means of X-ray spectroscopy in the energy range between 6 key and 20 key and by Laue diffraction techniques. The analyses include measurements of characteristic detector parameters like energy resolution, count rate capability and effects of different gain settings. The limit of a single photon counting operation in white beam X-ray diffraction experiments is discussed with regard to the occurrence of pile-up events, for which the energy information about individual photons is lost. In case of monochromatic illumination the pnCCD can be used as a fast conventional CCD with a charge handling capacity (CHC) of about 300,000 electrons per pixel. If the CHC is exceeded, any surplus charge will spill to neighboring pixels perpendicular to the transfer direction due to electrostatic repulsion. The possibilities of increasing the number of storable electrons are investigated for different voltage settings by exposing a single pixel with X-rays generated by a microfocus X-ray source. The pixel binning mode is tested as an alternative approach that enables a pnCCD operation with significantly shorter readout times.
The third-generation X-ray source BESSYII (Berlin, Germany) provides coherent X-ray radiation which can be used for static and dynamic speckle analysis. Recently we have demonstrated that one can perform experiments with coherent white radiation provided by a bending magnet (5 < E < 20 keV). In this paper we show that the diffraction figure of the initial pinhole must be considered for the interpretation of coherent experiments. The reflectivity spectrum of a sample results from the Fresnel diffraction of the incident pinhole deformed by the static speckle features of the sample surface. For dynamical experiments all speckle like features alter with time whereas the pure Fresnel fringes remain constant. (c) 2007 Published by Elsevier B.V.
The first application of a pnCCD detector for X-ray scattering experiments using white synchrotron radiation at BESSY II is presented. A Cd arachidate multilayer was investigated in reflection geometry within the energy range 7 keV < E < 35 keV. At fixed angle of incidence the two-dimensional diffraction pattern containing several multilayer Bragg peaks and respective diffuse-resonant Bragg sheets were observed. Since every pixel of the detector is able to determine the energy of every incoming photon with a resolution Delta E/E similar or equal to 10(-2). a three-dimensional dataset is finally obtained. In order to achieve this energy resolution the detector was operated in the so-called single-photon- counting mode. A full dataset was evaluated taking into account all photons recorded within 10(5) detector frames at a readout rate of 200 Hz. By representing the data in reciprocal-space coordinates, it becomes obvious that this experiment with the pnCCD detector provides the same information as that obtained by combining a large number of monochromatic scattering experiments using conventional area detectors.
In situ and ex situ SAXS investigation of colloidal sedimentation onto laterally patterned support
(2009)
We report on in situ investigations of colloidal ordering during gravity sedimentation from a colloidal suspension onto a prepatterned support using a polymeric surface relief grating (SRG) as the support. The ordering of colloids with a diameter of 420 nm was investigated by means of grazing-incidence small-angle X-ray scattering (GISAXS) and transmission SAXS using a preparation cell guaranteeing stable temperature and humidity. GISAXS was used for in situ monitoring of the time evolution of colloidal ordering within the whole illuminated sample area. The onset of ordering was indicated by the increase of integrated intensity within a small time frame shortly before complete evaporation of the dispersant. Single domains of coated samples were investigated ex situ by SAXS in transmission geometry where the irradiated sample area was 200 x 200 mu m(2) only. Domains with the typical size of a few millimeters were observed varying in orientation and crystallographic structure for various positions at the sample. They were mainly oriented along the grooves of the grating, confirming the influence of the underlying grating on colloidal ordering.
In situ high temperature x-ray reflectivity and grazing incidence x-ray diffraction measurements in the energy dispersive mode are used to study the ordered face-centered tetragonal (fct) L1(0) phase formation in [Fe(19 angstrom)/ Pt(25 angstrom)](x10) multilayers prepared by ion beam sputtering. With the in situ x-ray measurements it is observed that (i) the multilayer structure first transforms to a disordered FePt and subsequently to an ordered fct L1(0) phase, (ii) the ordered fct L1(0) FePt peaks start to appear at 320°C annealing, (iii) the activation energy of the interdiffusion is 0.8 eV and (iv) ordered fct FePt grains have preferential out-of-plane texture. The magneto-optical Kerr effect and conversion electron Mossbauer spectroscopies are used to study the magnetic properties of the as- deposited and 400°C annealed multilayers. The magnetic data for the 400°C annealed sample indicate that the magnetization is at an angle of ~50° from the plane of the film.
Bimodal temperature behavior of structure and mobility in high molecular weight p3ht thin films
(2009)
We report a temperature dependent crystalline structure of spin-coated thin films of high molecular weight regioregular poly(3-hexylthiophene) (P3HT) (M-n similar to 30000 g/mol) and its correlation with charge carrier mobility. These investigations show a reversible change of the crystalline structure, where the interlayer lattice spacing (100)along the alkyl side chains continuously increases up to a temperature of about 220 degrees C; in contrast, the in-plane pi-pi distance reduces with increasing temperature. These changes in structure are reversible and can be repeated several times. The temperature-induced structural properties differ for thick and thin films, pointing to a surface/interface role in stabilization of the layer morphology. In contrast to the structural changes, the carrier mobility is rather constant in the temperature range from room temperature up to 100-120 degrees C, followed by a continuous decrease. For thick layers this drop is significant and the transistor performance almost vanishes at high temperature, however, it completely recovers upon cooling back to roorn temperature. The drop of the charge carrier mobility at higher temperatures is in contrast with expectations front the structural studies, considering the increase of crystalline fraction of the polycrystalline layer. our electrical measurements Underscore that the reduction of the macroscopic mobility is mostly caused by it pronounced decrease of the intergrain transport. The thermally induced crystallization along(100) direction and the creation of numerous small crystallites at the film-substrate interface reduce the number of long polymer chain, bridging crystalline domains, which ultimately limits the macroscopic charge transport.
The development of surface relief and density patterns in azobenzene polymer films was studied by diffraction at two different wavelengths. We used x-ray diffraction of synchrotron radiation at 0.124 nm in combination with visible light diffraction at a wavelength of 633 nm. In contrast to visible light scattering x-ray diffraction allows the separation of a surface relief and a density grating contribution due to the different functional dependence of the scattering power. Additionally, the x-ray probe is most sensitive for the onset of the surface grating formation
Temperature dependent energy-dispersive X-ray diffraction and magnetic study of Fe/Al interface
(2007)
In situ temperature dependent energy-dispersive structural and magnetic study of electron beam evaporated Fe/Al multilayer sample (MLS) has been investigated. The structural studies show the formation of an intermixed FeAl transition layer of a few nanometers thick at the interface during deposition, which on annealing at 300 degrees C transforms to B2FeAl intermetallic phase. Magnetization decreases with increase in temperature and drops to minimum above 300 degrees C due to increase in anti-ferromagnetic interlayer coupling and formation of nonmagnetic FeAl phase at the interface. The Curie temperature (T-c) is found to be 288 degrees C and is much less than that of bulk bcc Fe.
The possibilities and limits of structure refinement of Langmuir-Blodgett films by means of symmetrical reflection of X- rays are described using the example of a stearic acid multilayer. Three different techniques for the determiantion of the electron density profile from reflectivity data are compared; a Fourier method, a Patterson method, and model calculations. The important role of the a priori information for finding the besft structure model is outlined.
Investigation of the chain-chain interface in a lead-stearate multilayer using neutron reflectivity
(1995)
The thermal treatment of Y-type Langmuir-Blodgett (LB) films formed from the amphiphilic derivative of 2,5- diphenyl-1,3,4-oxadiazole 1 results in changes of the molecular packing. These changes have been analysed by a combination of X-ray specular reflectivity data, X-ray grazing incidence diffraction data and scanning force microscopy images, On the basis of these experimental data we have simulated possible supramolecular structures, These simulations provide insight into the intermolecular interactions giving rise to the observed structural transitions. The crystalline structure induced by thermal treatment of the LB films is characterized by a uniaxial texture, which is correlated with the dipping direction during deposition of the LB film.
The molecular in-plane structure of uranyl arachidate Langmuir-Blodgett (LB) films formed at different subphase pH values was analysed by means of X-ray grazing-incidence diffraction. For multilayers formed at low subphase pH a reorganisation of the arachidic acid film structure is confirmed. At appropriate subphase pH values, reorganisation of the film structure, e.g. via the formation of three-dimensional crystallites, is prevented by the presence of the uranyl ions and by the subsequent introduction of conformational disorder (gauche defects) in the alkyl chains. The observation of a macroscopic flow-induced in-plane texture in these uranyl arachidate LB films has profound implications for the design of ordered, supramolecular structures by the Langmuir-Blodgett technique.
Thermally induced rearrangement of fatty acid salt molecules in Langmuir-Blodgett multilayers
(1997)
Characterization of InGaAs single quantum wells buried in GaAs[001] by grazing incidence diffraction
(1997)