Refine
Year of publication
Document Type
- Article (2407) (remove)
Keywords
- Conformational analysis (14)
- biomaterials (13)
- nanoparticles (13)
- fluorescence (12)
- Palladium (11)
- singlet oxygen (11)
- Fluorescence (10)
- SERS (10)
- block copolymers (10)
- conformational analysis (10)
Institute
- Institut für Chemie (2407) (remove)
Propagation of inductive and resonance effects of phenyl substituents within 1-(substituted phenyl)-6,7- dimethoxy-3,4-dihydro- and -1,2,3,4-tetrahydroisoquinolines were studied with the aid of C-13 and N-15 NMR chemical shifts and ab initio calculations. The substituent-induced changes in the chemical shift (SCS) were correlated with a dual substituent parameter equation. The contributions of conjugative (rho(R)) and nonconjugative effects (rho(F)) were analyzed, and mapping of the substituent-induced changes is given over the entire isoquinoline moiety for both series. The experimental results can be rationalized with the aid of the resonance polarization concept. This means the consideration of the substituent-sensitive balance of different resonance structures, i.e., electron delocalization, and the effect of the aromatic ring substituents on their relative contributions. With tetrahydroisoquinolines, the delocalization of the nitrogen lone pair (stereoelectronic effect) particularly contributes. Correlation analysis of the Mulliken atomic charges for the dihydroisoquinoline derivatives was also performed. The results support the concept of the substituent-sensitive polarization of the isoquinoline moiety even if the polarization pattern achieved via the NMR approach is not quite the same as that predicted by the computational charges. Previously the concepts of localized pi- polarization and extended polarization have been used to explain polar substituent effects within aromatic side-chain derivatives. We consider that the resonance polarization model effectively contributes to the understanding of the polar substituent effects
In order to elucidate the interactions of copper with wood, three mononuclear copper(II) coordination compounds with a vanillinate anion, cis-[Cu(C8H7O3)(2)(H2O)(2)] (1), trans-[Cu(C8H7O3)(2)(H2O)(2)].2H(2)O (2), and trans- [Cu(C8H7O3)(2)(H2O)(2)] (3), have been characterized. X-ray structure analysis of the cis isomer 1 reveals two bidentate vanillinate ions coordinated via methoxy (Cu-O1 2.260(2) angstrom) and deprotonated hydroxy oxygen atoms (Cu-O2 1.909(2) angstrom), and two water molecules (Cu-O1w 2.087(2) angstrom) in the octahedral CuO6 chromophore. Two axes O1-Cu- O1w' in the octahedron have the same length, while the third axis O2-Cu-O2' is shorter. This is in agreement with the room temperature EPR spectrum of 1, showing two signals (g(12) 2.302, g(3) 2.005), but interestingly, three signals (g(1) 2.393, g(2) 2.214, g(3) 2.010) in the 115 K spectrum were found. The same coordination atoms were found also in the trans isomer 2 (Cu-O2 1.950(2), Cu-O1w 1.994(2), Cu-O1 2.334(2) angstrom), however here, two axes of almost equal length are short (O2-Cu-O2' O1w-Cu-O1w'), while the third axis is longer (O1-Cu-O1'). On the other hand, three (rhombic) signals (g(1) 2.289, g(2) 2.163, g(3) 2.086) in the room temperature EPR spectrum of 2 suggest three different axes in the coordination octahedron. In the EPR spectrum, of the second trans complex 3, a slightly rhombically distorted elongated axial spectrum is found. The 115 K EPR spectra of the two trans complexes 2 and 3 do not differ significantly from the features observed at room temperature. These results indicate that there is not always a straightforward correlation between the results of XRD structure analysis and EPR spectroscopy. Nevertheless, both methods can act also complementarily and give a deeper insight into the nature of copper(II) chromophores
Facile organization of the inorganic sandwiched heteropolytungstomolybdate K-13[Eu(SiW9Mo2O39)(2)] (E) into highly ordered supramolecular nanostructured materials by complexation with a series of cationic surfactants is achieved by the ionic self-assembly (ISA) route. The structure and phase behavior of the complexes were examined by IR spectroscopy, differential scanning calorimetry, optical microscopy, and small- and wide-angle X-ray scattering. This class of materials shows a number of interesting physicochemical properties, namely liquid-crystalline phases (both thermotropic and lyotropic) and strong photoluminescence. The photophysical behavior (fluorescence spectra, fluorescence lifetimes, fluorescence quantum yield) of the complexes differs widely in solid powders, films, and solutions. The amphiphilic cationic surfactants not only play a structural role but also have a strong influence on the photophysical properties of E. The photophysical behavior of E can in this way be easily modified by its organizational motifs
The reaction of methyl acridin-9-ylthiosemicarbazide under basic conditions with methyl bromoacetate resulted in a 1,3-thiazolin-4-one structure as provided by X-ray crystallography. The structure forced a re-evaluation of the reactant methyl acridin-9-ylthiosemicarbazide, originally thought to be 2-methyl 4-acridin-9-ylthiosemicarbazide based on synthetic expectations, but which when examined by X-ray crystallography was found to be in fact the isomeric 2- methyl 1-acridin-9-ylthiosemicarbazide resulting from rearrangement via a spiro form which it is in equilibrium with in solution. The product resulting from reaction with methyl iodide was also studied and the previously reported semicarbazide produced by reaction with MNO was re-examined. In both cases, the 1,2 isomer rather than the 2,4 isomer was found to be present based on the sign of the 3JCH3,N11 coupling. Full characterization of the compounds was rendered by 1H, 13C, and 15N solution-state NMR, and in the solid state, by both 13C and 15N NMR.
Push-pull alkenes are substituted alkenes with one or two electron-donating substituents on one end of C=C double bond and with one or two electron-accepting substituents at the other end. Allowance for pi-electron delocalization leads to the central C=C double bond becoming ever more polarized and with rising push-pull character, the pi-bond order of this double bond is reduced and, conversely, the corresponding pi-bond orders of the C-Don and C- Ace bonds are accordingly increased. This push-pull effect is of decisive influence on both the dynamic behavior and the chemical reactivity of this class of compounds and thus it is Of Considerable interest to both determine and to quantify the inherent push-pull effect. previously, the barriers to rotation about the C=C, C-Don and/or C-Acc partial double bonds (Delta G(not equal), as determined by dynamic NMR spectroscopy) or the C-13 chemical shift difference of the polarized C=C partial double bond (Delta delta(C=C)) were employed for this purpose, However, these parameters can have serious limitations, viz. the barriers can be immeasurable on the NMR timescale (either by being too high or too low-, heavily-biased conformers are present, etc.) or Delta delta(C=C) behaves in a non-additive manner with respect to the combination of the four substituents. Hence, a general parameter to quantify the push-pull effect is not yet available. Ab initio MO calculations on a collection of compounds, together with NBO analysis, provided valuable information on the structure, bond energies, electron occupancies and bonding/antibonding interactions. In addition to Delta G(C=C)(not equal) (either experimentally determined or theoretically calculated) and Delta delta(C=C), the bond length of the C=C partial double bond was also examined and it proved to be a reliable parameter to quantify the push-pull effect. Equally so, the quotient of the occupation numbers of the antibonding and bonding pi orbitals of the central C=C partial double bond ( pi*(C=C)/pi(C=C) ) could also be employed for this purpose
For the first time, site-selective distortion has been investigated for two different structural units in the ternary compound alpha-GaPO4 under the influence of a permanent external electric field. Based on 54 measured reflection intensities, the electric-field-induced distortion of PO4 and GaO4 tetrahedra in alpha-GaPO4 crystals is evaluated using a model of pseudoatomic displacements introduced recently [Gorfman, Tsirelson & Pietsch (2005). Acta Cryst. A61, 387- 396]. A stronger variation of the P-O bond lengths in the PO4 tetrahedron was found compared to the bonds in the GaO4 tetrahedron. The different distortions of the tetrahedra owing to the electric field were analysed in terms of the valence charge density of alpha-GaPO4 and its topological characteristics. The larger charge of the P pseudoatom compared to the Ga atom was recognized as the main reason for the higher sensitivity of the PO4 tetrahedron to a permanent external electric field
Propagation and chain-length averaged termination rate coefficients, k(p) and <k(t)>, for radical polymerizations of methacrylates carrying poly(ethylene glycol) (PEG) units are reported. kp derived from pulsed laser initiated polymerizations in bulk, in organic solvents, and in ionic liquids follows the methacrylate-type family behavior. Contrary, diffusion controlled k(t) values obtained from chemically initiated polymerizations with in-line FT- NIR monitoring of monomer conversion are strongly affected by the PEG units in the ester group. Compared to alkyl methacrylates <k(t)> is unexpectedly high. Moreover, <k(t)> of poly(ethylene glycol) ethyl ether methacrylate shows a significant reduction in k(t) already at 15% conversion, whereas dodecyl methacrylate <k(t)> is constant up to at least 70% conversion.
The trithiocarbonate 2-(benzylsulfanylthiocarbonylsulfanyl) propanoic acid is formed as minor by-product in the synthesis of the dithioester 2-((2-phenylthioacetyl)sulfanyl) propanoic acid via the Grignard route. The mechanism for this side reaction is not clear. The isolated trithiocarbonate may act as unsymmetrical but bifunctional RAFT agent in the aqueous polymerization of N,N-dimethyl acrylamide. Therefore, it is important to separate it completely from the dithioester before engaging the latter in controlled free radical polymerization to guarantee a maximum control.
Quantification of the (Anti)Aromaticity of Fulvalenes Subjected to -Electron Cross-Delocalization
(2008)
Fulvalenes 3-12 were theoretically studied at the ab initio level of theory. For the global minima structures, the occupation of the bonding (pi)C=C orbital of the interring C=C double bond obtained by NBO analysis quantitatively proves pi-electron cross-delocalization resulting in, at least partially, 2- or 6pi-electron aromaticity and 8pi- electron antiaromaticity for appropriate moieties. The cross-conjugation was quantified by the corresponding occupation numbers and lengths of the interring C=C double bonds, while the aromaticity or antiaromaticity due to cross- delocalization of the pi-electrons was visualized and quantified by through-space NMR shielding surfaces.
The reaction of styrene with trifluoromethanesulfonyl nitrene generated from trifluoromethanesulfonamide in the system (t-BuOCl+NaI) results in the formation of trifluoro-N-[2-phenyl-2-(trifluoromethylsulfonyl) aminoethyl]methanesulfonamide, 1-pheny1-2-iodo-ethanol, and 2,5-diphenyl-1,4-bis(trifluoromethyl sulfonyl)piperazine rather than the expected product of aziridination, 2-phenyl-1-(trifluoromethylsulfonyl) aziridine. The mechanism of the reaction is discussed.
Multinuclear dynamic NMR spectroscopy of 3,5-bis(trifluoromethylsulfonyl)-1,3,5-oxadiazinane (3) revealed the existence of two conformers with differently oriented CF3 groups with respect to the ring, and two dynamic processes: ring inversion and restricted rotation about the N-S bond. Two transition states connecting the two conformers and corresponding to clockwise and counterclockwise rotations about the N-S bond were found; the calculated activation barriers of about 12 kcal/mol are in excellent agreement with those measured experimentally for the related molecule 1,3,5-tris(trifluoromethylsulfonyl)-1,3,5-triazinane (1). X-ray analysis proved the existence of the symmetric isomer of 3, which is the minor isomer in solutions but the only one in the crystal due to packing effects. The normal Perlin effect (JCHax < JCHeq)observed for 2(6)-CH2 in 3, whereas the reversed Perlin effect was found for the 4-CH2 group in 3 as well as for all CH2 groups in 1 both experimentally and theoretically. The latter effect in compounds 1, 3, and 1- (methylsulfonyl)-3,5-bis(trifluoromethylsulfonyl)-1,3,5-triazinane (2) can be considered as a genuine reverse Perlin effect since larger values of 1JCH are observed for longer C-H bonds.
We have recently shown that efficient polymer solar cells can be fabricated by using a weakly soluble derivative of poly-p-vinylene (M3EH-PPV) as the electron donor. Here we present studies on bilayer devices using organic electron acceptors with varying LUMO levels and M3EH-PPV. It is found that the open-circuit voltage scales linearly with the LUMO level of the acceptor, reaching values as high as 1.5 V when cyano-substituted poly(p-phenyleneethynylene)-alt- poly(p-phenylenevinylene) copolymers are used. Further, we discovered that for an increasing number of triple bonds in the repeat unit of the acceptor polymer the device performance decreases with increasing thickness of the acceptor layer. Also, the quantum efficiency was smaller when using polymers with higher LUMO levels. Thus, further effort is needed to design optimum acceptor polymers for devices exhibiting large open-circuit voltage and high quantum efficiency
In most cases where ring closing metathesis is applied to the synthesis of heterocycles, alpha,omega-dienes are used as precursors. If substrates containing more than two double bonds are subjected to a metathesis reaction, carba- or heterocycles bearing additional exocyclic alkene functionality result, or multiple ring closing processes occur. This offers interesting and potentially very useful synthetic perspectives. On the other hand, selectivity problems need to be addressed as the cyclization of substrates with more than two double bonds available for olefin metathesis may result in constitutional isomers or stereoisomers. This review highlights problems and opportunities evolving from ring closing metathesis of tri-, tetra-, and polyenes as a strategy for the selective synthesis of functionalized heterocycles. The chapter on RCM of trienes is subdivided according to the symmetry of the metathesis precursor. The following two chapters deal with the double or multiple RCM of tetra- or polyenes. These processes are further classified according to the preferred cyclization mode. Finally, the application of cascade or domino metathesis reactions to the synthesis of heterocycles will be discussed. These processes can be classified into those where exclusively C-C-double bonds take part in the metathesis reaction, and those where one or more C-C-triple bonds are involved
The push-pull character of a series of para-phenyl substituted isophorone chromophores has been quantified by the 13C chemical shift difference of the three conjugated partial C=C double bonds and the quotient of the occupations of both the bonding and anti-bonding orbitals of these C=C double bonds as well. The correlations of the two push-pull quantifying parameters, and to the corresponding bond lengths, strongly recommend ;*c=c/ ;c=c as the general parameter to estimate charge alternation and as a very useful indication of the molecular hyperpolarizabilities for NLO application of the compounds studied.
pH sensing in living cells represents one of the most prominent topics in biochemistry and physiology. In this study we performed one-photon and two-photon time-domain fluorescence lifetime imaging with a laser-scanning microscope using the time-correlated single-photon counting technique for imaging intracellular pH levels. The suitability of different commercial fluorescence dyes for lifetime-based pH sensing is discussed on the basis of in vitro as well of in situ measurements. Although the tested dyes are suitable for intensity-based ratiometric measurements, for lifetime- based techniques in the time-domain so far only BCECF seems to meet the requirements of reliable intracellular pH recordings in living cells.
Molecule-detective
(2006)
Biosensors are analytical devices incorporating biological material (receptor) intimately associated with or integrated within a physicochernical transducer. Advantages are the high selectivity for analyte detection. Examples given comprise the very successful commercial blood glucose biosensors made for the self-control by the diabetic patients. Other biosensors are part of an analytic system, including the sensor chips Of surface plasmon resonance or interferometry based devices, piezoelectric or reflectometric sensors capable of direct measurement of mass changes, and thermometric and other reagentless sensors. The development of nanotubes-based devices allows for significant enhancment of the signal-to-noise ratio of the biosensors. A milestone on the way towards miniaturization and parallelization of biosensors is the recently developed and prize-winning electronic DNA chip
The crude methanol extract of the seeds of Derris trifoliata showed potent and dose dependent larvicidal activity against the 2nd instar larvae of Aedes aegypti. From this extract two unusual rotenoid derivatives, a rotenoloid (named 7a-O-methyl-12a-hydroxydeguelol) and a spirohomooxarotenoid (named spiro-13-homo-13-oxaelliptone), were isolated and characterised. In addition a rare natural chromanone (6,7-dimethoxy-4-chromanone) and the known rotenoids rotenone, tephrosin and dehydrodeguelin were identified. The structures were assigned on the basis of spectroscopic evidence. The larvicidal activity of the crude extract is mainly due to rotenone. (c) 2006 Elsevier Ltd. All rights reserved
The complexes [(HgCl2)(2)((ch)(2)30S(4)O(6))] (1), [HgCl,(mn21S(2)O(5))] (2), [HgCl2(ch18S(2)O(4))] (3) and [HgI(meb12S(2)O(2))](2)[Hg2I6] (4) have been synthesized, characterized and their crystal structures were determined. In [(HgCl2)(2)((ch)(2)3OS(4)O(6))] two HgCl2 units are discretely bonded within the ligand cavity of the 30-membered dichinoxaline-tetrathia-30-crown-10 ((ch)(2)30S(4)O(6)) forming a binuclear complex. HgCl2 forms I : I "in-cavity" complexes with the 21-membered maleonitrile-dithia-21-crown-7(mn21S(2)O(5)) ligand and the 18-membered chinoxaline- dithia-18-crown-6 (ch18S(2)O(4)) ligand, respectively. The 12-membered 4-methyl-benzo-dithia-12-crown-4 (meb12S(2)O(2)) ligand gave with two equivalents HgI2 the compound [HgI(meb12S(2)O(2))](2)[Hg2I6]. In the cation [HgI(meb12S(2)O(2))](+) meb12S(2)O(2) forms with the cation HgI+ a half-sandwich complex
The electronic effects of the 5- and 6-membered heterocyclic rings on the C=N-N unit of five different hydrazone derivatives of pyridine-2-, -3- and -4-carbaldehydes, pyrrole-2-carbaldehyde, furan-2- and -3-carbaldehydes and thiophene-2- and -3-carbaldehydes have been studied with the aid of 13C and 15N NMR measurements together with the natural bond orbital (NBO) analysis. As model compounds are used the corresponding substituted benzaldehyde derivatives. The polarization of the C=N unit of the hydrazone functionality of the heteroaryl derivatives occurs in an analogous manner with that of phenyl derivatives. The electron-withdrawing heteroaryl groups destabilize and the electron-donating groups stabilize the positive charge development at the CN carbon while the effect on the negative charge development is opposite. The 15N NMR chemical shift of the C=N and C=N-N nitrogens and the NBO charges at C=N-N unit can be correlated with the replacement substituent constants of the heteroaryl groups. 13C NMR shifts of the C=N carbon of N,N- dialkylhydrazones of the heteroarenecarbaldehydes can be correlated with a dual parameter equation possessing the polar substituent constant ;* of the heteroaryl group and the electronegativity of the heteroatom as variables.
The report shows that simple LbL deposition of positively charged chitosan and negatively charged heparin can be used to efficiently modify the native surface of both NiTi and Ti without any previous treatments. Moreover, mineralization of the polymer multilayers with calcium phosphate leads to surfaces with low contact angles around 70 and 20 degrees for NiTi and Ti, respectively. This suggests that a polymer multilayer/calcium phosphate hybrid coating could be useful for making NiTi or Ti implants that are at the same time antibacterial (via the chitosan), suppress blood clot formation (via the heparin), and favor fast endothelialization (via the improved surface hydrophilicity compared to the respective neat material).
Metal ion induced self-assembly of the rigid ligand 1,4-bis(2,2':6',2 ''-terpyridine- 4'-yl) benzene (1) with Fe(II), Co(II), Ni(II) and Zn(II) acetate in aqueous solution results in extended, rigid- rod like metallosupramolecular coordination polyelectrolytes (MEPE-1). Under the current experimental conditions the molar masses range from 1000 g mol(-1) up to 500 000 g mol(-1). The molar mass depends on concentration, stoichiometry, metal-ion and time. In addition, we present viscosity measurements, small angle neutron scattering and AFM data. We introduce a protocol to precisely control the stoichiometry during self-assembly using conductometry. The protocol can be used with different terpyridine ligands and the above-mentioned metal ions and is of paramount importance to obtain meaningful and reproducible results. As a control experiment we studied the mononuclear 4'- (phenyl)2,2':6',2 ''-terpyridine (3) complex with Ni(II) and Zn(II) and the flexible ligand 1,3- bis[4'-oxa(2,2': 6',2 ''-terpyridinyl)] propane (2) with Ni(II) acetate (Ni-MEPE-2). This ligand does not form extended macroassemblies but likely ring-like structures with 3 to 4 repeat units. Through spin- coating of Ni-MEPE-1 on a solid surface we can image the MEPEs in real space by AFM. SANS measurements of Fe-MEPE-1 verify the extended rigid-rod type structure of the MEPEs in aqueous solution.
Homoleptic Ni-II and Fe-II complexes of the "large-surface" phenanthroline-type ligand 1,12-diazaperylene (dap), [Ni(dap)(3)](BF4)(2) (1) and [Fe(dap)(3)](PF6)(2) (2), respectively, were synthesized. In the crystal structure the complex cation [M(dap)(3)](2+) (M = Ni, Fe) exhibits C-3 symmetry and interacts with three other cations by pi-pi stacking. It forms a new metalla-supramolecular assembly with a honeycomb structure containing nanochannels running parallel to the crystallographic c axis. Aggregation by pi-pi stacking between metal complexes of "large-surface" ligands should give new perspectives for inorganic supramolecular chemistry.
A short and convenient synthesis of metallochlorin-C-60 dyads based on a Heck-type hetero coupling at the 3(2) position of a chlorin is described. p-Bromobenzaldehyde was treated with Zn-metalated 13(2)- demethoxycarbonylmethylpheophorbide a, using a palladium acetate/LiCl catalyst mixture under phase-transfer conditions in DMF at 70 degrees C. The resulting asymmetric olefin was obtained in a high trans/cis ratio. The desired trans isomer was separated and subsequently transformed into a donor-acceptor dyad by a 1,3-dipolar cycloaddition to C-60 in the presence of sarcosine in refluxing toluene. The resulting dyads are expected to undergo efficient photoinduced electron transfer and can potentially be utilized in solar energy conversion devices.
The new tetrathiacrown ethers maleonitrile-tetrathia-12-crown-4 (mn12S(4)) and maleonitrile-tetrathia-13-crown- 4 (mn13S(4)) have been prepared and characterised by X-ray crystallographic analysis. These crown ethers form 2:1, 3:2 and 1: 1 complexes with AgY (Y = BF4, PF6). The crystal structures of [Ag(mn12S(4))(2)]BF4 (3a), [Ag(mn13S(4))(2)]BF4 (4a) and [Ag-2(mn13S(4))(3)](PF6)(2) (6b) have been determined. Compound 3a contains the centrosymmetric sandwich complex cation [Ag(mn12S(4))(2)](+) where each mn12S(4) ligand is coordinated to the Ag centre in an endo manner through all four S atoms. The 2:1 complex [Ag(mn12S(4))(2)](+) is the first sandwich complex with a tetrathiacrown ether and the first complex with an octa(thioether) coordination sphere. The crystal structure of compound 4a also reveals a 2:1 complex. This complex, [Ag(mnl3S(4))(2)](+), exhibits a half-sandwich structure. One mn13S(4) ligand coordinates to Ag+ by all four S donor atoms and the other 13S(4) crown by only one S atom. Compound 6b contains a dinuclear Ag complex. The Ag complexes 3a,b-8a,b were also studied by electrospray ionisation mass spectrometry. Collision-induced dissociation (CID) was used to compare the relative stability of 2:1 complexes [AgL2]+ and 1:1 complexes [AgL](+) (L = mn12S(4), mn13S(4)). The C-13 NMR chemical shifts of 2:1 and 1:1 Ag complexes and their corresponding free ligands were also estimated and compared. The free energy of the barrier of ring inversion (Delta G(double dagger)) for [Ag(mn12S(4))(2)](+) was determined to be 64 kJmol(-1).
Metal-ion-induced self-assembly in aqueous solution of the rigid ligand 1,4-bis(2,2':6',2 ''-terpyridine-4'-yl)benzene (1) with Fe(OAc)(2) and Ni(OAc)(2) is investigated with viscosimetry, SANS, and AFM. Ligand 1 forms extended, rigid-rod like metallo-supramolecular coordination polyeectrolytes (MEPEs) with a molar mass of up to 200 000 g mol(-1) under the Current experimental conditions. The molar mass depends oil concentration, stoichiometry, and time. By spin-coating MEPEs oil a solid surface, we call image the MEPEs in real space by AFM. Both AFM and SANS confirm the extended rigid-rod-type structure of the MEPEs. As a control experiment, we also studied the flexible ligand 1,3-bis[4'-oxa(2,2':6',2 ''-terpyridinyl)]propane (2). Ligand 2 does not form extended macro-assemblies but likely ringlike structures with three 10 four repeat units. Finally, we present it protocol to control the stoichiometry during self-assembly using conductometry, which is of paramount importance to obtain meaningful and reproducible results.
The conformations of N-benzylideneani lines p-X-C6H4-CH=N-C6H4 p-Y (X, Y = NO2, CN, CF3, F, Cl, Br, H, Me, OMe, NMe2) have been studied by B3LYP density functional (DFT) hybrid method in combination with the 6-31G* or 6-311G* split valence basis set. The twist of the plane of the aniline ring with respect to the other part of the molecule (tau(2)) is systematically controlled by substituents X and Y, the effect of Y being larger. The value of the dihedral angle tau(2), correlates nicely with equation tau(2) = rho(F)(Y)(x)sigma(F)(Y)+rho(+R)(Y)(x)sigma(+)(R)(Y) + k(x) or tau(2) = rho(F)(X)(y)sigma(F)(X)+rho(-)(R)(X)(y)sigma(+)(R)(X) + k(y), respectively, when aniline or benzylidene substituent is varied. ED substituents X diminish the sensitivity of tau(2) to the aniline substituent Y[rho(F)(Y)(x) and rho(+)(R)(Y)(x)] while ED substituents Y increase the sensitivity Of T2 to the benzylidene substituent X[rho(F)(X)(y) and rho(+)(R)(X)(y)]. There seems to be two competitive conjugative interactions for the aniline ring n electrons: one with the nitrogen lone pair and one with the C=N unit. Substituents X and Y adjust the extent of these interactions and therefore the conformation of the molecule. A good correlation is observed between the dihedral angle tau(2) and the experimental C-13 NMR chemical shift of the C=N carbon of N-benzylideneanilines in CDCl3 (C) 2007 Elsevier B.V. All rights reserved.
A new functional group, the hydroxy group, was inserted into a Betti base by reaction with salicylaldehyde, and the naphthoxazine derivatives thus obtained were converted by ring-closure reactions with formaldehyde, acetaldehyde, propionaldehyde or phosgene to the corresponding naphth[1',2':5,6][1,3]oxazino[3,2-c][1,3]benzoxazine derivatives. Further, the conformational analysis of these polycyclic compounds by NMR spectroscopy and an accompanying molecular modelling are reported; especially, both quantitative anisotropic ring current effects of the aromatic moieties in these compounds and steric substituent effects were employed to determine the stereochemistry of the naphthoxazinobenzoxazine derivatives.
Free radical homo- and copolymerization of the highly polar 3-(N-[2-methacryloyloxyethyl]-N,N-dimethylammonio) propane sulfonate with the nonpolar n-butylmethacrylate was investigated in the ionic liquids 1-butyl-3-methyl imidazolium tetrafluoroborate and 1-butyl-3-methylimidazolium hexafluoro phosphate, and compared to analogous polymerizations in standard solvents. Higher molar masses are obtained for the zwitterionic homopolymer when the polymerization is carried out in an ionic liquid compared to the classical reaction in water. Although homopolymerization of the sulfobetain monomer as well as of n-butylmethacrylate results in phase separation during the polymerization process, copolymerization of a stoichiometric ratio of the two monomers in the ionic liquids produced transparent gels indicating that no macrophase separation occurs. The use of ionic liquids as reaction medium improved the copolymerization behavior of the two methacrylates significantly. Whereas only minor amounts of n-butyl methacrylate were incorporated in the copolymer when synthesized in acetonitrile, the content of the non-polar monomer units in the zwitterionic copolymer approached increasingly its content in the polymerization mixture when ionic liquids were employed as solvents
Tria-, penta-, hepta- and nonafulvenes (1-4) have been studied theoretically at the MP2 ab initio level of theory. For the global minimum structures, the occupation of the bonding ;C=C orbital of the exocyclic C=C double bond, obtained by NBO analysis, quantitatively proves ;-electron delocalization which can reveal partial 2-, 6- and 10-;-electron aromaticity, and 4-, 8- and 12-;-electron antiaromaticity of the ring moieties. Beside the corresponding occupation number, this conjugation was quantified by the length of the exocyclic C=C double bond whilst the (anti)aromaticity of the ring moieties of 1-4 was visualized and quantified by through space NMR shielding surfaces (TSNMRS).
Highly fluorescent crystalline and liquid crystalline columnar phases of pyrene-based structures
(2006)
A concept for highly ordered solid-state structures with bright fluorescence is proposed: liquid crystals based on tetraethynylpyrene chromophores, where the rigid core is functionalized with flexible, promesogenic alkoxy chains. The synthesis of this novel material is presented. The therniotropic properties are studied by means of differential scanning calorimetry (DSC), cross-polarized optical microscopy (POM), and X-ray diffraction. The mesogen possesses an enantiotropic Col(h) phase over a large temperature range before clearing. The material is highly fluorescent in solution and, most remarkably, in the condensed state, with a broad, strongly red shifted emission. Fluorescence quantum yields (Phi(F)) have been determined to be 70% in dichloromethane solution and 62% in the solid state. Concentration- and temperature-dependent absorption and emission studies as well as quantum-chemical calculations on isolated molecules and dimers are used to clarify the type of intermolecular interactions present as well as their influence on the fluorescence quantum yield and spectral properties of the material. The high luminescence efficiency in the solid state is ascribed to rotated chromophores, leading to an optically allowed lowest optical transition
The influence of the water soluble polymer poly(ethylene glycol) (PEG) on structure formation in the quasiternary system sodium dodecylsulfate (SDS)/pentanol-xylene/water was checked by means of conductometry, rheology, and micro differential calorimetry. The polymer induces the formation of an isotropic phase channel between the o/w and w/o microemulsion. The transition from the normal as well as from the inverse micellar to the bicontinuous phase range can be detected by conductometry, rheology as well as micro-DSC. As a result of polymer-surfactant interactions, the spontaneous curvature of the surfactant film is changed and a sponge phase is formed. The bicontinuous phase is characterized by a moderate shear viscosity, a Newtonian flow behaviour, and the disappearence of interphasal water in the heating curve of the micro-DSC. When the polymer-modified bicontinuous phase is used as a template phase for the nanoparticle formation, spherical BaSO4 nanoparticles were formed. During the following solvent evaporation process the primarily formed spherical nanoparticles aggregate to nanorods and triangular structures due to the non-restriction of the bicontinuous template phase in longitudinal direction
The aim of this work was to investigate the effect of decreased cytosolic pyruvate kinase (PKc) on potato (Solanum tuberosum) tuber metabolism. Transgenic potato plants with strongly reduced levels of PKc were generated by RNA interference gene silencing under the control of a tuber-specific promoter. Metabolite profiling showed that decreased PKc activity led to a decrease in the levels of pyruvate and some other organic acids involved in the tricarboxylic acid cycle. Flux analysis showed that this was accompanied by changes in carbon partitioning, with carbon flux being diverted from glycolysis toward starch synthesis. However, this metabolic shift was relatively small and hence did not result in enhanced starch levels in the tubers. Although total respiration rates and the ATP to ADP ratio were largely unchanged, transgenic tubers showed a strong decrease in the levels of alternative oxidase (AOX) protein and a corresponding decrease in the capacity of the alternative pathway of respiration. External feeding of pyruvate to tuber tissue or isolated mitochondria resulted in activation of the AOX pathway, both in the wild type and the PKc transgenic lines, providing direct evidence for the regulation of AOX by changes in pyruvate levels. Overall, these results provide evidence for a crucial role of PKc in the regulation of pyruvate levels as well as the level of the AOX in heterotrophic plant tissue, and furthermore reveal that these parameters are interlinked in vivo.
Tuning of the excited-state properties and photovoltaic performance in PPV-based polymer blends
(2008)
The nonadiabatic coupling of an adsorbate close to a metallic surface leads to electronic damping of adsorbate vibrations and line broadening in vibrational spectroscopy. Here, a perturbative treatment of the electronic contribution to the lifetime broadening serves as a building block for a new approach, in which anharmonic vibrational transition rates are calculated from a position-dependent coupling function. Different models for the coupling function will be tested, all related to embedding theory. The first two are models based on a scattering approach with (i) a jellium-type and (ii) a density functional theory based embedding density, respectively. In a third variant a further refined model is used for the embedding density, and a semiempirical approach is taken in which a scaling factor is chosen to match harmonic, single-site, first-principles transition rates, obtained from periodic density functional theory. For the example of hydrogen atoms on (adsorption) and below (subsurface absorption) a Pd(111) surface, lifetimes of and transition rates between vibrational levels are computed. The transition rates emerging from different models serve as input for the selective subsurface adsorption of hydrogen in palladium starting from an adsorption site, by using sequences of infrared laser pulses in a laser distillation scheme.
Together with the nonsubstituted reference compound, para-methoxy- and para-nitro cyclohexyl benzoates have been synthesized and their conformational equilibria studied by low temperature NMR spectroscopy and theoretical DFT calculations. The free energy differences ;G° between axial and equatorial conformers were examined with respect to polar substituent influences on the conformational equilibrium of O-mono-substituted cyclohexane.
Through the cyclization of 1-(;-hydroxynaphthyl)-1,2,3,4-tetrahydroisoquinoline and 1-(;- hydroxynaphthyl)-1,2,3,4-tetrahydroisoquinoline with formaldehyde, phosgene, p-nitrobenzaldehyde or p-chlorophenyl isothiocyanate, 8-substituted 10,11-dihydro-8H,15bH-naphth[1,2-e][1,3]oxazino[4,3-a]isoquinolines (3 and 4) and 10,11- dihydro-8H,15bH-naphth[2,1-e][1,3]oxazino[4,3-a]isoquinolines (15 and 16) were prepared. Conformational analysis of both the piperidine and the 1,3-oxazine moieties of these heterocycles by NMR spectroscopy and an accompanying theoretical study revealed that these two conformationally flexible six-membered ring moieties prefer twisted chair conformers.
Electrospray ionization was employed to study the mass spectrometric behavior of the maleonitrile tetrathiacrown ethers mn12S(4) (1) and mn13S(4) (2) and maleonitrile pentathiacrown ether mn15S(5) (3) and of their complexes with various metal salts (MX2, M=Pd, Pt, Ni, Co, Fe; X=Cl, CrCl3, Ni(BF4)(2), TIPF6 or Cd(NO3)(2)) and Cu(SO3CF3)(2). Both singly charged, [MXL](+) and [MXL2]+, and doubly charged complexes, [MLn](2+) (n = 2-5), were observed. The formation of the different complexes consisting of the transition metal ion, the counterion and the various crown ethers and their subsequent dissociation was also studied by collision-induced dissociation measurements which were also used to evaluate the relative stabilities of the complexes. It was found that the collisional voltages for the dissociation of the complexes were generally greater in the [MXL](+) complexes than in the corresponding [MXL2]+ complexes. Copyright (c) 2006 John Wiley & Sons, Ltd
Variously substituted tolanes were employed to show that the push-pull effect is also active in C equivalent to C triple bonds by the successful correlation of the occupation quotient pi*/pi of the pi orbital in resonance with the substituted phenyl moieties of tolanes versus the bond length of the C equivalent to C triple bond. In addition, the influences of the ortho phenyl ring substituents on the C-13 chemical shifts of the triple bond carbon atoms, which were estimated by Rubin et al.(4) to be "inapplicable for describing triple bond polarization", were re-evaluated, leading to the conclusion that, while anisotropic effects of ortho substituents are negligible, the steric ortho-substituent effects do in fact dominate the deviations obtained. A detailed theoretical NBO/NCS study has been employed to illuminate the facts of this case
New amphiphilic diblock copolymers : surfactant properties and solubilization in their micelles
(2006)
Several series of amphiphilic diblock copolymers are investigated as macrosurfactants in comparison to reference low-molar-mass and polymeric surfactants. The various copolymers share poly(butyl acrylate) as a common hydrophobic block but are distinguished by six different hydrophilic blocks (one anionic, one cationic, and four nonionic hydrophilic blocks) with various compositions. Dynamic light scattering experiments indicate the presence of micelles over the whole concentration range from 10(-4) to 10 g(.)L(-1). Accordingly, the critical micellization concentrations are very low. Still, the surface tension of aqueous solutions of block copolymers decreases slowly but continuously with increasing concentration, without exhibiting a plateau. The longer the hydrophobic block, the shorter the hydrophilic block, and the less hydrophilic the monomer of the hydrophilic block is, the lower the surface tension is. However, the effects are small, and the copolymers reduce the surface tension much less than standard low-molar-mass surfactants. Also, the copolymers foam much less and even act as anti-foaming agents in classical foaming systems composed of standard surfactants. The copolymers stabilize O/W emulsions made of methyl palmitate as equally well as standard surfactants but are less efficient for O/W emulsions made of tributyrine. However, the copolymer micelles exhibit a high solubilization power for hydrophobic dyes, probably at their core-corona interface, in dependence on the initial geometry of the micelles and the composition of the block copolymers. Whereas micelles of copolymers with strongly hydrophilic blocks are stable upon solubilization, solubilization-induced micellar growth is observed for copolymers with moderately hydrophilic blocks
The regioselectivities of methyl- and phenylhydrazine with acridin-9-yl isothiocyanate (thus yielding thiosemicarbazides with acridine substituted on the urea-type side) were examined. Methythydrazine regioselectivity was high with the alpha-nitrogen atom overwhelmingly more nucleophilic than the beta-nitrogen atom; phenylhydrazine regioselectivity was poor but varied with the solvent and only in the case of ethanol was nucleophilic predominance of the alpha-nitrogen atom pronounced. Of note, whilst both phenyl thiosemicarbazides were present in solution only as spiro forms, the methyl product was present as an equilibrium mixture of open-chain and spiro thiosemicarbazides. Reactions on the NH2 blocked analogue of methyl acridin-9-ylthiosemicarbazide (1-isopropylidene-2- methylthiosemicarbazide) were also examined. Interestingly, present in the starting material itself was a structural motif of novelty wherein a triazolethione represented the major species of an equilibrium between cyclic and open-chain forms
The crystal and molecular structures of sodium and barium complexes of dibenzo-24-crown-8 ether
(2006)
The sodium and barium isothiocyanate complexes of 6,7,9,10,12,13,20,21,23,24,26,27-dodecahydrodibenzo[b,n]- 1,4,7,10,13,16,19,22-octaoxacyclotetracosin (dibenzo-24-crown-8 ether = DB24C8) were synthesized and analyzed by X-ray diffraction. The sodium complex, [Na(DB24C8)(NCS)(H2O)] 1, crystallizes in the orthorhombic space group Fdd2 with 16 molecules in the unit cell. The coordination number of Na is 6 and the central ion is located in a distorted octahedric environment. Only four of the crown ether oxygen atoms are involved. The coordination polyhedron is completed by the isothiocanate anion and by a water molecule, which is stabilized by hydrogen bonds. The barium complex, [Ba(DB24C8)(NCS)(2)] 2, crystallizes in the trigonale space group P3(1)21 with 3 molecules in the unit cell. Crystallographic C-2 symmetry is observed for the complex. The coordination number of Ba is 10. Barium is coordinated with the eight oxygen atoms of the macrocyclic ligand and with two isothiocyanate anions. The absolute structure was estimated using the FLACK parameter