Refine
Year of publication
Document Type
- Article (2407) (remove)
Keywords
- Conformational analysis (14)
- biomaterials (13)
- nanoparticles (13)
- fluorescence (12)
- Palladium (11)
- singlet oxygen (11)
- Fluorescence (10)
- SERS (10)
- block copolymers (10)
- conformational analysis (10)
Institute
- Institut für Chemie (2407) (remove)
Propagation of inductive and resonance effects of phenyl substituents within 1-(substituted phenyl)-6,7- dimethoxy-3,4-dihydro- and -1,2,3,4-tetrahydroisoquinolines were studied with the aid of C-13 and N-15 NMR chemical shifts and ab initio calculations. The substituent-induced changes in the chemical shift (SCS) were correlated with a dual substituent parameter equation. The contributions of conjugative (rho(R)) and nonconjugative effects (rho(F)) were analyzed, and mapping of the substituent-induced changes is given over the entire isoquinoline moiety for both series. The experimental results can be rationalized with the aid of the resonance polarization concept. This means the consideration of the substituent-sensitive balance of different resonance structures, i.e., electron delocalization, and the effect of the aromatic ring substituents on their relative contributions. With tetrahydroisoquinolines, the delocalization of the nitrogen lone pair (stereoelectronic effect) particularly contributes. Correlation analysis of the Mulliken atomic charges for the dihydroisoquinoline derivatives was also performed. The results support the concept of the substituent-sensitive polarization of the isoquinoline moiety even if the polarization pattern achieved via the NMR approach is not quite the same as that predicted by the computational charges. Previously the concepts of localized pi- polarization and extended polarization have been used to explain polar substituent effects within aromatic side-chain derivatives. We consider that the resonance polarization model effectively contributes to the understanding of the polar substituent effects
In order to elucidate the interactions of copper with wood, three mononuclear copper(II) coordination compounds with a vanillinate anion, cis-[Cu(C8H7O3)(2)(H2O)(2)] (1), trans-[Cu(C8H7O3)(2)(H2O)(2)].2H(2)O (2), and trans- [Cu(C8H7O3)(2)(H2O)(2)] (3), have been characterized. X-ray structure analysis of the cis isomer 1 reveals two bidentate vanillinate ions coordinated via methoxy (Cu-O1 2.260(2) angstrom) and deprotonated hydroxy oxygen atoms (Cu-O2 1.909(2) angstrom), and two water molecules (Cu-O1w 2.087(2) angstrom) in the octahedral CuO6 chromophore. Two axes O1-Cu- O1w' in the octahedron have the same length, while the third axis O2-Cu-O2' is shorter. This is in agreement with the room temperature EPR spectrum of 1, showing two signals (g(12) 2.302, g(3) 2.005), but interestingly, three signals (g(1) 2.393, g(2) 2.214, g(3) 2.010) in the 115 K spectrum were found. The same coordination atoms were found also in the trans isomer 2 (Cu-O2 1.950(2), Cu-O1w 1.994(2), Cu-O1 2.334(2) angstrom), however here, two axes of almost equal length are short (O2-Cu-O2' O1w-Cu-O1w'), while the third axis is longer (O1-Cu-O1'). On the other hand, three (rhombic) signals (g(1) 2.289, g(2) 2.163, g(3) 2.086) in the room temperature EPR spectrum of 2 suggest three different axes in the coordination octahedron. In the EPR spectrum, of the second trans complex 3, a slightly rhombically distorted elongated axial spectrum is found. The 115 K EPR spectra of the two trans complexes 2 and 3 do not differ significantly from the features observed at room temperature. These results indicate that there is not always a straightforward correlation between the results of XRD structure analysis and EPR spectroscopy. Nevertheless, both methods can act also complementarily and give a deeper insight into the nature of copper(II) chromophores
Facile organization of the inorganic sandwiched heteropolytungstomolybdate K-13[Eu(SiW9Mo2O39)(2)] (E) into highly ordered supramolecular nanostructured materials by complexation with a series of cationic surfactants is achieved by the ionic self-assembly (ISA) route. The structure and phase behavior of the complexes were examined by IR spectroscopy, differential scanning calorimetry, optical microscopy, and small- and wide-angle X-ray scattering. This class of materials shows a number of interesting physicochemical properties, namely liquid-crystalline phases (both thermotropic and lyotropic) and strong photoluminescence. The photophysical behavior (fluorescence spectra, fluorescence lifetimes, fluorescence quantum yield) of the complexes differs widely in solid powders, films, and solutions. The amphiphilic cationic surfactants not only play a structural role but also have a strong influence on the photophysical properties of E. The photophysical behavior of E can in this way be easily modified by its organizational motifs
The reaction of methyl acridin-9-ylthiosemicarbazide under basic conditions with methyl bromoacetate resulted in a 1,3-thiazolin-4-one structure as provided by X-ray crystallography. The structure forced a re-evaluation of the reactant methyl acridin-9-ylthiosemicarbazide, originally thought to be 2-methyl 4-acridin-9-ylthiosemicarbazide based on synthetic expectations, but which when examined by X-ray crystallography was found to be in fact the isomeric 2- methyl 1-acridin-9-ylthiosemicarbazide resulting from rearrangement via a spiro form which it is in equilibrium with in solution. The product resulting from reaction with methyl iodide was also studied and the previously reported semicarbazide produced by reaction with MNO was re-examined. In both cases, the 1,2 isomer rather than the 2,4 isomer was found to be present based on the sign of the 3JCH3,N11 coupling. Full characterization of the compounds was rendered by 1H, 13C, and 15N solution-state NMR, and in the solid state, by both 13C and 15N NMR.
Push-pull alkenes are substituted alkenes with one or two electron-donating substituents on one end of C=C double bond and with one or two electron-accepting substituents at the other end. Allowance for pi-electron delocalization leads to the central C=C double bond becoming ever more polarized and with rising push-pull character, the pi-bond order of this double bond is reduced and, conversely, the corresponding pi-bond orders of the C-Don and C- Ace bonds are accordingly increased. This push-pull effect is of decisive influence on both the dynamic behavior and the chemical reactivity of this class of compounds and thus it is Of Considerable interest to both determine and to quantify the inherent push-pull effect. previously, the barriers to rotation about the C=C, C-Don and/or C-Acc partial double bonds (Delta G(not equal), as determined by dynamic NMR spectroscopy) or the C-13 chemical shift difference of the polarized C=C partial double bond (Delta delta(C=C)) were employed for this purpose, However, these parameters can have serious limitations, viz. the barriers can be immeasurable on the NMR timescale (either by being too high or too low-, heavily-biased conformers are present, etc.) or Delta delta(C=C) behaves in a non-additive manner with respect to the combination of the four substituents. Hence, a general parameter to quantify the push-pull effect is not yet available. Ab initio MO calculations on a collection of compounds, together with NBO analysis, provided valuable information on the structure, bond energies, electron occupancies and bonding/antibonding interactions. In addition to Delta G(C=C)(not equal) (either experimentally determined or theoretically calculated) and Delta delta(C=C), the bond length of the C=C partial double bond was also examined and it proved to be a reliable parameter to quantify the push-pull effect. Equally so, the quotient of the occupation numbers of the antibonding and bonding pi orbitals of the central C=C partial double bond ( pi*(C=C)/pi(C=C) ) could also be employed for this purpose
For the first time, site-selective distortion has been investigated for two different structural units in the ternary compound alpha-GaPO4 under the influence of a permanent external electric field. Based on 54 measured reflection intensities, the electric-field-induced distortion of PO4 and GaO4 tetrahedra in alpha-GaPO4 crystals is evaluated using a model of pseudoatomic displacements introduced recently [Gorfman, Tsirelson & Pietsch (2005). Acta Cryst. A61, 387- 396]. A stronger variation of the P-O bond lengths in the PO4 tetrahedron was found compared to the bonds in the GaO4 tetrahedron. The different distortions of the tetrahedra owing to the electric field were analysed in terms of the valence charge density of alpha-GaPO4 and its topological characteristics. The larger charge of the P pseudoatom compared to the Ga atom was recognized as the main reason for the higher sensitivity of the PO4 tetrahedron to a permanent external electric field
Propagation and chain-length averaged termination rate coefficients, k(p) and <k(t)>, for radical polymerizations of methacrylates carrying poly(ethylene glycol) (PEG) units are reported. kp derived from pulsed laser initiated polymerizations in bulk, in organic solvents, and in ionic liquids follows the methacrylate-type family behavior. Contrary, diffusion controlled k(t) values obtained from chemically initiated polymerizations with in-line FT- NIR monitoring of monomer conversion are strongly affected by the PEG units in the ester group. Compared to alkyl methacrylates <k(t)> is unexpectedly high. Moreover, <k(t)> of poly(ethylene glycol) ethyl ether methacrylate shows a significant reduction in k(t) already at 15% conversion, whereas dodecyl methacrylate <k(t)> is constant up to at least 70% conversion.
The trithiocarbonate 2-(benzylsulfanylthiocarbonylsulfanyl) propanoic acid is formed as minor by-product in the synthesis of the dithioester 2-((2-phenylthioacetyl)sulfanyl) propanoic acid via the Grignard route. The mechanism for this side reaction is not clear. The isolated trithiocarbonate may act as unsymmetrical but bifunctional RAFT agent in the aqueous polymerization of N,N-dimethyl acrylamide. Therefore, it is important to separate it completely from the dithioester before engaging the latter in controlled free radical polymerization to guarantee a maximum control.
Quantification of the (Anti)Aromaticity of Fulvalenes Subjected to -Electron Cross-Delocalization
(2008)
Fulvalenes 3-12 were theoretically studied at the ab initio level of theory. For the global minima structures, the occupation of the bonding (pi)C=C orbital of the interring C=C double bond obtained by NBO analysis quantitatively proves pi-electron cross-delocalization resulting in, at least partially, 2- or 6pi-electron aromaticity and 8pi- electron antiaromaticity for appropriate moieties. The cross-conjugation was quantified by the corresponding occupation numbers and lengths of the interring C=C double bonds, while the aromaticity or antiaromaticity due to cross- delocalization of the pi-electrons was visualized and quantified by through-space NMR shielding surfaces.
The reaction of styrene with trifluoromethanesulfonyl nitrene generated from trifluoromethanesulfonamide in the system (t-BuOCl+NaI) results in the formation of trifluoro-N-[2-phenyl-2-(trifluoromethylsulfonyl) aminoethyl]methanesulfonamide, 1-pheny1-2-iodo-ethanol, and 2,5-diphenyl-1,4-bis(trifluoromethyl sulfonyl)piperazine rather than the expected product of aziridination, 2-phenyl-1-(trifluoromethylsulfonyl) aziridine. The mechanism of the reaction is discussed.
Multinuclear dynamic NMR spectroscopy of 3,5-bis(trifluoromethylsulfonyl)-1,3,5-oxadiazinane (3) revealed the existence of two conformers with differently oriented CF3 groups with respect to the ring, and two dynamic processes: ring inversion and restricted rotation about the N-S bond. Two transition states connecting the two conformers and corresponding to clockwise and counterclockwise rotations about the N-S bond were found; the calculated activation barriers of about 12 kcal/mol are in excellent agreement with those measured experimentally for the related molecule 1,3,5-tris(trifluoromethylsulfonyl)-1,3,5-triazinane (1). X-ray analysis proved the existence of the symmetric isomer of 3, which is the minor isomer in solutions but the only one in the crystal due to packing effects. The normal Perlin effect (JCHax < JCHeq)observed for 2(6)-CH2 in 3, whereas the reversed Perlin effect was found for the 4-CH2 group in 3 as well as for all CH2 groups in 1 both experimentally and theoretically. The latter effect in compounds 1, 3, and 1- (methylsulfonyl)-3,5-bis(trifluoromethylsulfonyl)-1,3,5-triazinane (2) can be considered as a genuine reverse Perlin effect since larger values of 1JCH are observed for longer C-H bonds.
We have recently shown that efficient polymer solar cells can be fabricated by using a weakly soluble derivative of poly-p-vinylene (M3EH-PPV) as the electron donor. Here we present studies on bilayer devices using organic electron acceptors with varying LUMO levels and M3EH-PPV. It is found that the open-circuit voltage scales linearly with the LUMO level of the acceptor, reaching values as high as 1.5 V when cyano-substituted poly(p-phenyleneethynylene)-alt- poly(p-phenylenevinylene) copolymers are used. Further, we discovered that for an increasing number of triple bonds in the repeat unit of the acceptor polymer the device performance decreases with increasing thickness of the acceptor layer. Also, the quantum efficiency was smaller when using polymers with higher LUMO levels. Thus, further effort is needed to design optimum acceptor polymers for devices exhibiting large open-circuit voltage and high quantum efficiency
In most cases where ring closing metathesis is applied to the synthesis of heterocycles, alpha,omega-dienes are used as precursors. If substrates containing more than two double bonds are subjected to a metathesis reaction, carba- or heterocycles bearing additional exocyclic alkene functionality result, or multiple ring closing processes occur. This offers interesting and potentially very useful synthetic perspectives. On the other hand, selectivity problems need to be addressed as the cyclization of substrates with more than two double bonds available for olefin metathesis may result in constitutional isomers or stereoisomers. This review highlights problems and opportunities evolving from ring closing metathesis of tri-, tetra-, and polyenes as a strategy for the selective synthesis of functionalized heterocycles. The chapter on RCM of trienes is subdivided according to the symmetry of the metathesis precursor. The following two chapters deal with the double or multiple RCM of tetra- or polyenes. These processes are further classified according to the preferred cyclization mode. Finally, the application of cascade or domino metathesis reactions to the synthesis of heterocycles will be discussed. These processes can be classified into those where exclusively C-C-double bonds take part in the metathesis reaction, and those where one or more C-C-triple bonds are involved