Refine
Has Fulltext
- no (140)
Year of publication
- 2013 (140) (remove)
Document Type
- Article (140) (remove)
Language
- English (140)
Is part of the Bibliography
- yes (140)
Keywords
- Climate change (4)
- Land use change (4)
- Iran (3)
- exhumation (3)
- Alborz Mountains (2)
- Asian monsoon (2)
- Earthquake source observations (2)
- Geostatistics (2)
- Holocene (2)
- Mountain basins (2)
Institute
- Institut für Geowissenschaften (140) (remove)
Changing food consumption patterns and associated greenhouse gas (GHG) emissions have been a matter of scientific debate for decades. The agricultural sector is one of the major GHG emitters and thus holds a large potential for climate change mitigation through optimal management and dietary changes. We assess this potential, project emissions, and investigate dietary patterns and their changes globally on a per country basis between 1961 and 2007. Sixteen representative and spatially differentiated patterns with a per capita calorie intake ranging from 1,870 to >3,400 kcal/day were derived. Detailed analyses show that low calorie diets are decreasing worldwide, while in parallel diet composition is changing as well: a discernable shift towards more balanced diets in developing countries can be observed and steps towards more meat rich diets as a typical characteristics in developed countries. Low calorie diets which are mainly observable in developing countries show a similar emission burden than moderate and high calorie diets. This can be explained by a less efficient calorie production per unit of GHG emissions in developing countries. Very high calorie diets are common in the developed world and exhibit high total per capita emissions of 3.7-6.1 kg CO2eq./day due to high carbon intensity and high intake of animal products. In case of an unbridled demographic growth and changing dietary patterns the projected emissions from agriculture will approach 20 Gt CO2eq./yr by 2050.
This study provides a detailed analysis of the mid-Holocene to present-day precipitation change in the Asian monsoon region. We compare for the first time results of high resolution climate model simulations with a standardised set of mid-Holocene moisture reconstructions. Changes in the simulated summer monsoon characteristics (onset, withdrawal, length and associated rainfall) and the mechanisms causing the Holocene precipitation changes are investigated. According to the model, most parts of the Indian subcontinent received more precipitation (up to 5 mm/day) at mid-Holocene than at present-day. This is related to a stronger Indian summer monsoon accompanied by an intensified vertically integrated moisture flux convergence. The East Asian monsoon region exhibits local inhomogeneities in the simulated annual precipitation signal. The sign of this signal depends on the balance of decreased pre-monsoon and increased monsoon precipitation at mid-Holocene compared to present-day. Hence, rainfall changes in the East Asian monsoon domain are not solely associated with modifications in the summer monsoon circulation but also depend on changes in the mid-latitudinal westerly wind system that dominates the circulation during the pre-monsoon season. The proxy-based climate reconstructions confirm the regional dissimilarities in the annual precipitation signal and agree well with the model results. Our results highlight the importance of including the pre-monsoon season in climate studies of the Asian monsoon system and point out the complex response of this system to the Holocene insolation forcing. The comparison with a coarse climate model simulation reveals that this complex response can only be resolved in high resolution simulations.
On 2012 May 20 and 29, two damaging earthquakes with magnitudes M-w 6.1 and 5.9, respectively, struck the Emilia-Romagna region in the sedimentary Po Plain, Northern Italy, causing 26 fatalities, significant damage to historical buildings and substantial impact to the economy of the region. The earthquake sequence included four more aftershocks with M-w, >= 5.0, all at shallow depths (about 7-9 km), with similar WNW-ESE striking reverse mechanism. The timeline of the sequence suggests significant static stress interaction between the largest events. We perform here a detailed source inversion, first adopting a point source approximation and considering pure double couple and full moment tensor source models. We compare different extended source inversion approaches for the two largest events, and find that the rupture occurred in both cases along a subhorizontal plane, dipping towards SSW Directivity is well detected for the May 20 main shock, indicating that the rupture propagated unilaterally towards SE. Based on the focal mechanism solution, we further estimate the co-seismic static stress change induced by the May 20 event. By using the rate-and-state model and a Poissonian earthquake occurrence, we infer that the second largest event of May 29 was induced with a probability in the range 0.2-0.4. This suggests that the segment of fault was already prone to rupture. Finally, we estimate peak ground accelerations for the two main events as occurred separately or simultaneously. For the scenario involving hypothetical rupture areas of both main events, we estimate M-w = 6.3 and an increase of ground acceleration by 50 per cent. The approach we propose may help to quantify rapidly which regions are invested by a significant increase of the hazard, bearing the potential for large aftershocks or even a second main shock.
Reliable estimations of magnitude of completeness (M-c) are essential for a correct interpretation of seismic catalogues. The spatial distribution of M-c may be strongly variable and difficult to assess in mining environments, owing to the presence of galleries, cavities, fractured regions, porous media and different mineralogical bodies, as well as in consequence of inhomogeneous spatial distribution of the seismicity. We apply a 3-D modification of the probabilistic magnitude of completeness (PMC) method, which relies on the analysis of network detection capabilities. In our approach, the probability to detect an event depends on its magnitude, source receiver Euclidian distance and source receiver direction. The suggested method is proposed for study of the spatial distribution of the magnitude of completeness in a mining environment and here is applied to a 2-months acoustic emission (AE) data set recorded at the Morsleben salt mine, Germany. The dense seismic network and the large data set, which includes more than one million events, enable a detailed testing of the method. This method is proposed specifically for strongly heterogeneous media. Besides, it can also be used for specific network installations, with sensors with a sensitivity, dependent on the direction of the incoming wave (e.g. some piezoelectric sensors). In absence of strong heterogeneities, the standards PMC approach should be used. We show that the PMC estimations in mines strongly depend on the source receiver direction, and cannot be correctly accounted using a standard PMC approach. However, results can be improved, when adopting the proposed 3-D modification of the PMC method. Our analysis of one central horizontal and vertical section yields a magnitude of completeness of about M-c approximate to 1 (AE magnitude) at the centre of the network, which increases up to M-c approximate to 4 at further distances outside the network; the best detection performance is estimated for a NNE-SSE elongated region, which corresponds to the strike direction of the low-attenuating salt body. Our approach provides us with small-scale details about the capability of sensors to detect an earthquake, which can be linked to the presence of heterogeneities in specific directions. Reduced detection performance in presence of strong structural heterogeneities (cavities) is confirmed by synthetic waveform modelling in heterogeneous media.
Supra-glacial deposition and flux of catastrophic rock-slope failure debris, south-central Alaska
(2013)
The ongoing debate over the effects of global environmental change on Earth's cryosphere calls for detailed knowledge about process rates and their variability in cold environments. In this context, appraisals of the coupling between glacier dynamics and para-glacial erosion rates in tectonically active mountains remain rare. We contribute to filling this knowledge gap and present an unprecedented regional-scale inventory of supra-glacial sediment flux and hillslope erosion rates inferred from an analysis of 123 large (> 0 center dot 1km2) catastrophic bedrock landslides that fell onto glaciers in the Chugach Mountains, Alaska, as documented by satellite images obtained between 1972 to 2008. Assuming these supra-glacial landslide deposits to be passive strain markers we infer minimum decadal-scale sediment yields of 190 to 7400tkm-2yr-1 for a given glacier-surface cross-section impacted by episodic rock-slope failure. These rates compare to reported fluvial sediment yields in many mountain rivers, but are an order of magnitude below the extreme sediment yields measured at the snouts of Alaskan glaciers, indicating that the bulk of debris discharged derives from en-glacial, sub-glacial or ice-proximal sources. We estimate an average minimum para-glacial erosion rate by large, episodic rock-slope failures at 0 center dot 5-0 center dot 7mmyr-1 in the Chugach Mountains over a 50-yr period, with earthquakes likely being responsible for up to 73% of this rate. Though ranking amongst the highest decadal landslide erosion rates for this size of study area worldwide, our inferred rates of hillslope erosion in the Chugach Mountains remain an order of magnitude below the pace of extremely rapid glacial sediment export and glacio-isostatic surface uplift previously reported from the region.
This paper presents a simple approach for the temporal disaggregation from daily to 3-hourly observed gridded temperature and precipitation (1 x 1km(2)) on the national scale. The intended use of the disaggregated 3-hourly data is to recalibrate the hydrological model currently used by the Norwegian Water Resources and Energy Directorate (NVE) for daily flood forecasting. By adapting the hydrological model to a 3-hourly temporal scale, the flood forecasting can benefit from available meteorological forecasts with finer temporal resolution and can better represent critical events of short duration and at small spatial scales. By consulting the temporal patterns of a High-Resolution Limited-Area Model (HIRLAM) hindcast series for northern Europe with an hourly temporal and a 0.1 degrees spatial resolution, existing daily 1 x 1km(2) grids for temperature and precipitation covering all of Norway (the seNorge data) were disaggregated into 3-hourly values for the time period September 1957 to December 2010. For the period 2000-05, the disaggregated 3-hourly temperature and precipitation data are validated against observed values from five meteorological stations and against 3-hourly data from the HIRLAM hindcast and daily seNorge data simply split into eight fractions. The results show that the disaggregated data perform best with anomaly correlation coefficients between 0.89 and 0.92 for temperature. With regard to precipitation, the disaggregated data also provide the highest correlations and the lowest errors. In addition, the disaggregated data prove to be best in estimating intervals without precipitation and tend to be most appropriate in estimating extreme precipitation with low occurrence probability (<20%).
The Pleistocene archeological record in East Africa has revealed unusual accumulations of Acheulean handaxes at prehistoric sites. In particular, there has been intensive debate concerning whether the artifact accumulation at the Middle Pleistocene Olorgesailie (Southern Kenya Rift) and Kariandusi (Central Kenya Rift) sites were a result of fluvial reworking or of in situ deposition by hominids. We used a two-step approach to test the hypothesis of fluvial reworking. Firstly, the behavior of handaxes in water currents was investigated in a current flume and the flow threshold required to reorientate the handaxes was determined. The results of these experiments suggested that, in relatively high energy and non-steady flow conditions, handaxes will reorientate themselves perpendicular to the current direction. Secondly, an automated image analysis routine was developed and applied to archeological plans from three Acheulean sites, two at Olorgesailie and one at Kariandusi, in order to determine the orientations of the handaxes. A Rayleigh test was then applied to the orientation data to test for a preferred orientation. The results revealed that the handaxes at the Upper Kariandusi Site and the Olorgesailie Main Site Mid Trench had a preferential orientation, suggesting reworking by a paleocurrent. The handaxes from the Olorgesailie Main Site H/6A, however, appeared to be randomly oriented and in situ deposition by the producers therefore remains a possibility.
In the last decade growing interest has emerged in quantifying the spatial and temporal variations in mountain building. Until recently, insufficient data have been available to attempt such a task at the scale of large orogens such as the Himalaya. The Himalaya accommodates ongoing convergence between India and Eurasia and is a focal point for studying orogen evolution and hypothesized interactions between tectonics and climate. Here we integrate 1126 published bedrock mineral cooling ages with a transient 1D Monte-Carlo thermal-kinematic erosion model to quantify the denudation histories along similar to 2700 km of the Himalaya. The model free parameter is a temporally variable denudation rate from 50 Ma to present. Thermophysical material properties and boundary conditions were tuned to individual study areas. Monte-Carlo simulations were conducted to identify the range of denudation histories that can reproduce the observed cooling ages. Results indicate large temporal and spatial variations in denudation and these are resolvable across different tectonic units of the Himalaya. More specifically, across > 1000 km of the southern Greater Himalaya denudation rates were highest (similar to 1.5-3 mm/yr) between similar to 10 and 2 Ma and lower (0.5-2.6 mm/yr) over the last 2 My. These differences are best determined in the NW-Himalaya. In contrast to this, across the similar to 2500 km length of the northern Greater Himalaya denudation rates vary over length scales of similar to 300-1700 km. Slower denudation (<1 mm/yr) occurred between 10 and 4 Ma followed by a large increase (1.2-2.6 mm/yr) in the last similar to 4 Ma. We find that only the southern Greater Himalayan Sequence clearly supports a continuous co-evolution of tectonics, climate and denudation. Results from the higher elevation northern Greater Himalaya suggest either tectonic driven variations in denudation due to a ramp-flat geometry in the main decollement and/or recent glacially enhanced denudation.
The northward motion of the Pamir indenter with respect to Eurasia has resulted in coeval thrusting, strike-slip faulting, and normal faulting. The eastern Pamir is currently deformed by east-west oriented extension, accompanied by uplift and exhumation of the Kongur Shan (7719m) and Muztagh Ata (7546m) gneiss domes. Both domes are an integral part of the footwall of the Kongur Shan extensional fault system (KES), a 250 km long, north-south oriented graben. Why active normal faulting within the Pamir is primarily localized along the KES and not distributed more widely throughout the orogen has remained unclear. In addition, relatively little is known about how deformation has evolved throughout the Cenozoic, despite refined estimates on present-day crustal deformation rates and microseismicity, which indicate where crustal deformation is presently being accommodated. To better constrain the spatiotemporal evolution of faulting along the KES, we present 39 new apatite fission track, zircon U-Th-Sm/He, and Ar-40/Ar-39 cooling ages from a series of footwall transects along the KES graben shoulder. Combining these data with present-day topographic relief, 1-D thermokinematic and exhumational modeling documents successive stages, rather than synchronous deformation and gneiss dome exhumation. While the exhumation of the Kongur Shan commenced during the late Miocene, extensional processes in the Muztagh Ata massif began earlier and have slowed down since the late Miocene. We present a new model of synorogenic extension suggesting that thermal and density effects associated with a lithospheric tear fault along the eastern margin of the subducting Alai slab localize extensional upper plate deformation along the KES and decouple crustal motion between the central/western Pamir and eastern Pamir/Tarim basin.
Basement-cored ranges formed by reverse faulting within intracontinental mountain belts are often composed of poly-deformed lithologies. Geological data capable of constraining the timing, magnitude, and distribution of the most recent deformational phase are usually missing in such ranges. In this paper, we present new low temperature thermochronological and geological data from a transect through the basement-cored Terskey Range, located in the Kyrgyz Tien Shan. Using these data, we are able to investigate the range's late Cenozoic deformation for the first time. Displacements on reactivated faults are constrained and deformation of thermochronologically derived structural markers is assessed. These structural markers postdate the earlier deformational phases, providing the only record of Cenozoic deformation and of the reactivation of structures within the Terskey Range. Overall, these structural markers have a southern inclination, interpreted to reflect the decreasing inclination of the reverse fault bounding the Terskey Range. Our thermochronological data are also used to investigate spatial and temporal variations in the exhumation of the Terskey Range, identifying a three-stage Cenozoic exhumation history: (1) virtually no exhumation in the Paleogene, (2) increase to slightly higher exhumation rates at similar to 26-20Ma, and (3) significant increase in exhumation starting at similar to 10Ma.
The Sierra de Aconquija and Cumbres Calchaquies in the thick-skinned northern Sierras Pampeanas, NW Argentina present an ideal setting to investigate the tectonically and erosionally controlled exhumation and uplift history of mountain ranges using thermochronological methods. Although these ranges are located along strike of one another, their spatiotemporal evolution varies significantly. Integrating modeled cooling histories constrained by K-Ar ages of muscovite and biotite, apatite fission track data as well as (U-Th)/He measurement of zircon and apatite reveal the structural evolution of these ranges beginning in the late stage of the Paleozoic Famatinian Orogeny. Following localized rift-related exhumation in the central part of the study area and slow erosion elsewhere, growth of the modern topography commenced in the Cenozoic during Andean deformation. The main activity occurred during the late Miocene, with varying magnitudes of rock uplift, surface uplift, and exhumation in the two mountain ranges. The Cumbres Calchaquies is characterized by a total of 5-7km of vertical rock uplift, around 3km of crestal surface uplift, and a maximum exhumation of 2-4km since that time. The Sierra de Aconquija experienced 10-13km of vertical rock uplift, similar to 4-5km of peak surface uplift, and 6-8km of exhumation since around 9Ma. Much of this exhumation occurred along a previously poorly recognized fault. Miocene reactivation of Cretaceous rift structures may explain along-strike variations within these ranges. Dating of sedimentary samples from adjacent basins supports the evolutionary model developed for the mountain ranges.
North of Naran in the Kaghan Valley (NE Pakistan), the metabasites of the melange units lying below the Kohistan Arc, contain glaucophane. Typically they reflect blueschist-metamorphic conditions (0.7 GPa, 400 degrees C). Associated graphite-rich metapelites with quartz veins underwent upper greenschist to amphibolite conditions. Near Naran we observed in quartz grains of type 3 veins first minute relics of Fe-Mg carpholite indicating earlier blueschist metamorphic conditions. P-T estimates indicate 1.2-1.6 GPa at 380-410 degrees C, pressure and temperature values typical for blueschist metamorphic conditions. Changes in mineral assemblages and abundant sudoite component in associated chlorite point to a pressure drop after peak I conditions. We assign the observed changes to peak I conditions occurring during a Cretaceous subduction event. Temperatures estimated with Raman graphite-thermometry clearly indicate a significant subsequent rise of post-peak I temperatures up to 500 degrees C. This is compatible with the amphibolite peak II assigned to the Tertiary continental collision that leads to subduction of the Indian Plate and ultra-high-pressure metamorphism. During subduction the blueschist metamorphic metapelites underwent dehydration, which caused alteration in the overlying lithospheric mantle. In a hydrated lithospheric mantle density is significantly reduced which enhanced subduction of continental crust in the Higher Himalaya. This P-T evolution is typical for a collision orogen with a high plateau but remarkably contrasting findings from Eastern Anatolia, where plateau building is in "statu nascendi" (e.g., Oberhänsli et al., 2010).
Timber harvesting by clear cutting is known to impose environmental impacts, including severe disturbance of the soil hydraulic properties which intensify the frequency and magnitude of surface runoff and soil erosion. However, it remains unanswered if harvest areas act as sources or sinks for runoff and soil erosion and whether such behavior operates in a steady state or evolves through time. For this purpose, 92 small-scale rainfall simulations of different intensities were carried out under pine plantation conditions and on two clear-cut harvest areas of different age. Nonparametrical Random Forest statistical models were set up to quantify the impact of environmental variables on the hydrological and erosion response. Regardless of the applied rainfall intensity, runoff always initiated first and yielded most under plantation cover. Counter to expectations, infiltration rates increased after logging activities. Once a threshold rainfall intensity of 20mm/h was exceeded, the younger harvest area started to act as a source for both runoff and erosion after connectivity was established, whereas it remained a sink under lower applied rainfall intensities. The results suggest that the impact of microtopography on surface runoff connectivity and water-repellent properties of the topsoil act as first-order controls for the hydrological and erosion processes in such environments. Fast rainfall-runoff response, sediment-discharge-hystereses, and enhanced postlogging groundwater recharge at catchment scale support our interpretation. At the end, we show the need to account for nonstationary hydrological and erosional behavior of harvest areas, a fact previously unappreciated in predictive models.
The expansion and intensification of soya bean agriculture in southeastern Amazonia can alter watershed hydrology and biogeochemistry by changing the land cover, water balance and nutrient inputs. Several new insights on the responses of watershed hydrology and biogeochemistry to deforestation in Mato Grosso have emerged from recent intensive field campaigns in this region. Because of reduced evapotranspiration, total water export increases threefold to fourfold in soya bean watersheds compared with forest. However, the deep and highly permeable soils on the broad plateaus on which much of the soya bean cultivation has expanded buffer small soya bean watersheds against increased stormflows. Concentrations of nitrate and phosphate do not differ between forest or soya bean watersheds because fixation of phosphorus fertilizer by iron and aluminium oxides and anion exchange of nitrate in deep soils restrict nutrient movement. Despite resistance to biogeochemical change, streams in soya bean watersheds have higher temperatures caused by impoundments and reduction of bordering riparian forest. In larger rivers, increased water flow, current velocities and sediment flux following deforestation can reshape stream morphology, suggesting that cumulative impacts of deforestation in small watersheds will occur at larger scales.
Badlands have long been considered as model landscapes due to their perceived close relationship between form and process. The often intense features of erosion have also attracted many geomorphologists because the associated high rates of erosion appeared to offer the opportunity for studying surface processes and the resulting forms. Recently, the perceived simplicity of badlands has been questioned because the expected relationships between driving forces for erosion and the resulting sediment yield could not be observed. Further, a high variability in erosion and sediment yield has been observed across scales. Finally, denudation based on currently observed erosion rates would have lead to the destruction of most badlands a long time ago. While the perceived simplicity of badlands has sparked a disproportional (compared to the land surface they cover) amount of research, our increasing amount of information has not necessarily increased our understanding of badlands in equal terms. Overall, badlands appear to be more complex than initially assumed. In this paper, we review 40 years of research in the Zin Valley Badlands in Israel to reconcile some of the conflicting results observed there and develop a perspective on the function of badlands as model landscapes. While the data collected in the Zin Valley clearly confirm that spatial and temporal patterns of geomorphic processes and their interaction with topography and surface properties have to be understood, we still conclude that the process of realizing complexity in the "simple" badlands has a model function both for our understanding as well as perspective on all landscape systems.
The M (w) 6.2 Baladeh earthquake occurred on 28 May 2004 in the Alborz Mountains, northern Iran. This earthquake was the first strong shock in this intracontinental orogen for which digital regional broadband data are available. The Baladeh event provides a rare opportunity to study fault geometry and ongoing deformation processes using modern seismological methods. A joint inversion for hypocentres and a velocity model plus a surface-wave group dispersion curve analysis were used to obtain an adapted velocity model, customised for mid- and long-period waveform modelling. Based on the new velocity model, regional waveform data of the mainshock and larger aftershocks (M (w) a parts per thousand yen3.3) were inverted for moment tensors. For the Baladeh mainshock, this included inversion for kinematic parameters. All analysed earthquakes show dominant thrust mechanisms at depths between 14 and 26 km, with NW-SE striking fault planes. The mainshock ruptured a 28A degrees south-dipping area of 24 x 21 km along a north-easterly direction. The rupture plane of the mainshock does not coincide with the aftershock distribution, neither in map view nor with respect to depth. The considered aftershocks form two main clusters. The eastern cluster is associated with the mainshock. The western cluster does not appear to be connected with the rupture plane of the mainshock but, instead, indicates a second activated fault plane dipping at 85A degrees towards the north.
Extremely rare veinlets and reaction textures composed of symplectites of olivine (similar to Fo(43-55)) + plagioclase +/- spinel +/- ilmenite, associated with more common pyroxene + plagioclase and amphibole + plagioclase varieties, are preserved within eclogites and garnet pyroxenites in the Moldanubian Zone of the Bohemian Massif. Thermodynamic modelling integrated with conventional geothermometry conducted on an eclogite reveals that the symplectite-forming stage occurred at high T (similar to 850 degrees C) and low P (< 6 and > 2 center dot 5 kbar). The development of the different symplectite types reflects reactions that took place in micro-scale domains. The breakdown of high-P garnet controlled the formation of olivine-bearing and amphibole + plagioclase symplectites, whereas breakdown of high-P omphacite led to formation of pyroxene + plagioclase symplectites. In addition, post-eclogite facies but pre-symplectite stage porphyroblastic amphibole and phlogopite were also replaced by olivine-bearing symplectites. Material transfer calculations and thermodynamic modelling indicate that the formation of different symplectite types was linked despite their different bulk compositions. For example, the olivine-bearing symplectites gained Fe +/- Mg, whereas adjacent amphibole + plagioclase and pyroxene + plagioclase symplectites show losses in Fe and Mg; Al, Si and Ca were also variably exchanged. The olivine-bearing symplectites were particularly sensitive to Na despite the small concentration of this element. In eclogites where Na was readily available, the plagioclase composition in the olivine-bearing symplectites shifted from pure anorthite to bytownite, with the less calcic feldspar partitioning Si and inhibiting the formation of orthopyroxene. This regional high-T, low-P granulite-facies symplectite overprint may have been caused by advective heat loss from rapidly exhumed high-T, high-P granulitic bodies (Gfohl Unit) that were emplaced into and over the middle crust (Monotonous and Varied Series) during Carboniferous continent-continent collision.
In order to speed up Precise Point Positioning (PPP)'s convergence, a combined PPP method with GPS and GLONASS which is based on using raw observations is proposed, and the positioning results and convergence time have been compared with that of single system. The ionospheric delays and receiver's Differential Code Bias (DCB) corrections are estimated as unknown parameters in this method. The numerical results show that the combined PPP has not caused significant impacts on the final solutions, but it greatly improved Position Dilution of Precision (PDOP) and convergence speed and enhanced the reliability of the solution. Meanwhile, the convergence speed is greatly influenced by the receiver's DCB, positioning results in horizontal which are better than 10 cm can be realized within 10 min. In addition, the ionosphere and DCB products can be provided with high precision.
Automated seismic event location by travel-time stacking an application to mining induced seismicity
(2013)
The Sabzevar ophiolites mark the Neotethys suture in east-north-central Iran. The Sabzevar metamorphic rocks, as part of the Cretaceous Sabzevar ophiolitic complex, consist of blueschist, amphibolite and greenschist. The Sabzevar blueschists contain sodic amphibole, epidote, phengite, calcite +/- A omphacite +/- A quartz. The epidote amphibolite is composed of sodic-calcic amphibole, epidote, albite, phengite, quartz +/- A omphacite, ilmenite and titanite. The greenschist contains chlorite, plagioclase and pyrite, as main minerals. Thermobarometry of a blueschist yields a pressure of 13-15.5 kbar at temperatures of 420-500 A degrees C. Peak metamorphic temperature/depth ratios were low (similar to 12 A degrees C/km), consistent with metamorphism in a subduction zone. The presence of epidote in the blueschist shows that the rocks were metamorphosed entirely within the epidote stability field. Amphibole schist samples experienced pressures of 5-7 kbar and temperatures between 450 and 550 A degrees C. The presence of chlorite, actinolite, biotite and titanite indicate greenschist facies metamorphism. Chlorite, albite and biotite replacing garnet or glaucophane suggests temperatures of > 300 A degrees C for greenschist facies. The formation of high-pressure metamorphic rocks is related to north-east-dipping subduction of the Neotethys oceanic crust and subsequent closure during lower Eocene between the Central Iranian Micro-continent and Eurasia (North Iran).
Clear S-to-P converted waves from the crust-mantle boundary (Moho) and lithosphere-asthenosphere boundary (LAB) have been observed on the eastern part of the Dead Sea Basin (DSB), and are used for the determination of the depth of the Moho and the LAB. A temporary network consisting of 18 seismic broad-band stations was operated in the DSB region as part of the DEad Sea Integrated REsearch project for 1.5 years beginning in September 2006. The obtained Moho depth (similar to 35 km) from S-to-P receiver functions agrees well with the results from P-to-S receiver functions and other geophysical data. The thickness of the lithosphere on the eastern part of the DSB is about 75 km. The results obtained here support and confirm previous studies, based on xenolith data, geodynamic modeling, heat flow observations, and S-to-P receiver functions. Therefore, the lithosphere on the eastern part of the DSB and along Wadi Araba has been thinned in the Late Cenozoic, following rifting and spreading of the Red Sea. The thinning of the lithosphere occurred without a concomitant change in the crustal thickness and thus an upwelling of the asthenosphere in the study area is invoked as the cause of the lithosphere thinning.
We integrate the information of multiple tomographic models acquired from the earth's surface by modifying a statistical approach recently developed for the integration of cross-borehole tomographic models. In doing so, we introduce spectral cluster analysis as the new core of the model integration procedure to capture the spatial heterogeneity present in all considered tomographic models and describe this heterogeneity in a fuzzy sense. Because spectral cluster algorithms analyze model structure locally, they are considered relatively robust with regard to systematically and spatially varying imaging capabilities typical for geophysical tomographic surveys conducted on the earth's surface. Using a synthetic aquifer example, a fuzzy spectral cluster algorithm can be used to integrate the information provided by 2D tomographic refraction seismic and DC resistivity surveys. The integrated information in the fuzzy membership domain is then used to derive an integrated zonal geophysical model outlining the major structural units present in both input models. We also explain how the fuzzy membership information can be used to identify optimal locations for sparse logging of additional target parameters, i.e., porosity information in our synthetic example. We demonstrate how this sparse porosity information can be extrapolated based on all tomographic input models. The resultant 2D porosity model matches the original porosity distribution reasonably well within the spatial resolution limits of the underlying tomographic models. Consecutively, we apply this approach to a field data base acquired over a former river channel. Sparse information about natural gamma radiation is available and extrapolated on the basis of the fuzzy membership information obtained by spectral cluster analysis of 2D P-wave velocity and electrical resistivity models. This field data shows that the presented parameter extrapolation procedure is robust, even if the locations of target parameter acquisition have not been optimized with regard to the fuzzy membership information.
A total of 271 pollen records were selected from a large collection of both raw and digitized pollen spectra from eastern continental Asia (70 degrees-135 degrees E and 18 degrees-55 degrees N). Following pollen percentage recalculations, taxonomic homogenization, and age-depth model revision, the pollen spectra were interpolated at a 500-year resolution and a taxonomically harmonized and temporally standardized fossil pollen dataset established with 226 pollen taxa, covering the last 22 cal lea. Of the 271 pollen records, 85% were published since 1990, with reliable chronologies and high temporal resolutions; of these, 50% have raw data with complete pollen assemblages, ensuring the quality of this dataset The pollen records available for each 500-year time slice are well distributed over all main vegetation types and climatic zones of the study area, making their pollen spectra suitable for paleovegetation and paleoclimate research. Such a dataset can be used as an example for the development of similar datasets for other regions of the world.
Deserts are a major source of loess and may undergo substantial wind-erosion as evidenced by yardang fields, deflation pans, and wind-scoured bedrock landscapes. However, there are few quantitative estimates of bedrock removal by wind abrasion and deflation. Here, we report wind-erosion rates in the western Qaidam Basin in central China based on measurements of cosmogenic Be-10 in exhumed Miocene sedimentary bedrock. Sedimentary bedrock erosion rates range from 0.05 to 0.4 mm/yr, although the majority of measurements cluster at 0.125 +/- 0.05 mm/yr. These results, combined with previous work, indicate that strong winds, hyper-aridity, exposure of friable Neogene strata, and ongoing rock deformation and uplift in the western Qaidam Basin have created an environment where wind, instead of water, is the dominant agent of erosion and sediment transport. Its geographic location (upwind) combined with volumetric estimates suggest that the Qaidam Basin is a major source (up to 50%) of dust to the Chinese Loess Plateau to the east. The cosmogenically derived wind erosion rates are within the range of erosion rates determined from glacial and fluvial dominated landscapes worldwide, exemplifying the effectiveness of wind to erode and transport significant quantities of bedrock.
As part of the International Continental Drilling Program deep lake drilling project Paleo Van, we investigated sulfate reduction (SR) in deep sediment cores of the saline, alkaline (salinity 21.4%0, alkalinity 155 m mEq-1, pH 9.81) Lake Van, Turkey. The cores were retrieved in the Northern Basin (NB) and at Ahlat Ridge (AR) and reached a maximum depth of 220 m. Additionally, 65-75 cm long gravity cores were taken at both sites. SR rates (SRR) were low (<22 nmol cm-3 day-1) compared to lakes with higher salinity and alkalinity, indicating that salinity and alkalinity are not limiting SR in Lake Van. Both sites differ significantly in rates and depth distribution of SR. In NB, SRR are up to 10 times higher than at AR. SR could be detected down to 19 mblf (meters below lake floor) at NB and down to 13 mblf at AR. Although SRR were lower at AR than at NB, organic matter (OM) concentrations were higher. In contrast, dissolved OM in the pore water at AR contained more macromolecular OM and less low molecular weight OM.VVe thus suggest, that OM content alone cannot be used to infer microbial activity at Lake Van but that quality of OM has an important impact as well. These differences suggest that biogeochemical processes in lacustrine sediments are reacting very sensitively to small variations in geological, physical, or chemical parameters over relatively short distances.
Convexities in the longitudinal profiles of actively incising rivers are typically considered to represent the morphologic signal of a transient response to external perturbations in tectonic or climatic forcing. Distinguishing such knickzones from those that may be anchored to the channel network by spatial variations in rock uplift, however, can be challenging. Here, we combine stream profile analysis, Be-10 watershed-averaged erosion rates, and numerical modeling of stream profile evolution to evaluate whether knickzones in the Abukuma massif of northeast Japan represent a temporal or spatial change in rock uplift rate in relation to forearc shortening. Knickzones in channels that drain the eastern flank of the Abukuma massif are characterized by breaks in slope-area scaling and separate low-gradient, alluvial upper-channel segments from high-gradient, deeply-incised lower channel segments. Average erosion rates inferred from Be-10 concentrations in modern sediment below knickzones exceed erosion rates above knickzones by 20-50%. Although profile convexities could be interpreted as a transient response to an increase in rock uplift rate associated with slip on the range-bounding fault, geologic constraints on the initiation of fault slip and the magnitude of displacement cannot be reconciled with a recent, spatially uniform increase in slip rate. Rather, we find that knickzone position, stream profile gradients, and basin averaged erosion rates are best explained by a relatively abrupt spatial increase in uplift rate localized above a flat-ramp transition in the fault system. These analyses highlight the importance of considering spatially non-uniform uplift in the interpretation of stream profile evolution and demonstrate that the adjustment of river profiles to fault displacement can provide constraints on fault geometry in actively eroding landscapes. (C) 2013 Elsevier B.V. All rights reserved.
The rhizosphere is a dynamic system strongly influenced by root activity. Roots modify the pH of their surrounding soil causing the soil pH to vary as a function of distance from root surface, location along root axes, and root maturity. Non-invasive imaging techniques provide the possibility to capture pH patterns around the roots as they develop.
We developed a novel fluorescence imaging set up and applied to the root system of two lupin (Lupinus albus L., Lupinus angustifolius L.) and one soft-rush (Juncus effusus L.) species. We grew plants in glass containers filled with soil and equipped with fluorescence sensor foils on the container side walls. We gained highly-resolved data on the spatial distribution of H+ around the roots by taking time-lapse images of the samples over the course of several days.
We showed how the soil pH in the vicinity of roots developed over time to different values from that of the original bulk soil. The soil pH in the immediate vicinity of the root surface varied greatly along the root length, with the most acidic point being at 0.56-3.36 mm behind the root tip. Indications were also found for temporal soil pH changes due to root maturity.
In conclusion, this study shows that this novel optical fluorescence imaging set up is a powerful tool for studying pH developments around roots in situ.
A high resolution multi proxy (pollen, grain size, total organic carbon) record from a small mountain lake (Lake Khuisiin; 46.6 degrees N, 101.8 degrees E; 2270 m a.s.l.) in the south eastern Khangai Mountains of central Mongolia has been used to explore changes in vegetation and climate over the last 1200 years. The pollen data indicates that the vegetation changed from dry steppe dominated by Poaceae and Artemisia (ca AD 760-950), to Larix forest steppe (ca AD 950-1170), Larix Betula forest steppe (ca AD 1170-1380), meadow dominated by Cyperaceae and Poaceae (ca AD 1380-1830), and Larix Betula forest steppe (after similar to AD 1830). The cold-wet period between AD 1380 and 1830 may relate to the Little Ice Age. Environmental changes were generally subtle and climate change seems to have been the major driver of variations in vegetation until at least the early part of the 20th century, suggesting that either the level of human activity was generally low, or the relationship between human activity and vegetation did not alter substantially between AD 760 and 1830. A review of centennial scale moisture records from China and Mongolia revealed that most areas experienced major changes at ca AD 1500 and AD 1900. However, the moisture availability since AD 1500 varied between sites, with no clear regional pattern or relationship to present day conditions. Both the reconstructions and the moisture levels simulation on a millennium scale performed in the MPI Earth System Model indicate that the monsoon-westerlies transition area shows a greater climate variability than those areas influenced by the westerlies, or by the summer monsoon only.
Shear folding, which is also referred to as slip folding, involves shear along planes that are oriented approximately parallel to the axial plane of the fold structure. These planes, which are typically axial-planar cleavage planes, facilitate high-angle reverse slip leading to fold limb rotation and amplification. This study builds on recent advances in our understanding of the role of weak fault zones in facilitating slip on misoriented faults; i.e., faults at a high angle to the maximum principal tectonic stress (sigma(1)). Analysis of folded marine sedimentary rocks from the Variscan of southern Ireland provides unambiguous microstructural evidence for reverse shear on chemically weakened cleavage domains. Significant silica loss in these cleavage domains, and as a consequence marked mechanical weakening, is seen as the primary cause for the reverse slip associated with the shear folding of these sedimentary rocks.
Finding evidence for ultrahigh-pressure (UHP) metamorphism in crustal rocks is far from straightforward. The index minerals coesite and diamond are incredibly inconspicuous and are therefore difficult to use as UHP prospecting tools. Consequently, petrographers rely on recognizing subtle breakdown microstructures that result from pressure release during the return to the surface of the once deeply buried rock. Similarly, many other UHP minerals are first suspected on the basis of typical reaction or exsolution microstructures. Thus, the painstaking use of microscopic techniques has been fundamental to the tremendous advances in characterizing, quantifying, and understanding macroscopic-scale, deep continental subduction, rapid exhumation, and mountain-building processes.
The internal geological structure of the Northeast German Basin (NEGB) is affected by intense salt diapirism and by the presence of several stratified aquifer complexes of regional relevance. The shallow Quaternary to late Tertiary freshwater aquifer is separated from the underlying Mesozoic saline aquifers by an embedded Tertiary clay enriched aquitard (Rupelian Aquitard). An important feature of this aquitard is that hydraulic connections between the upper and lower aquifers do exist in areas where the Rupelian Aquitard is missing (hydrogeological windows). Three-dimensional thermohaline numerical simulations are carried out to investigate the effects of such hydrogeological windows in the Rupelian Aquitard on the resulting groundwater, temperature, and salinity distributions. Numerical results suggest that hydrogeological windows act as preferential domains of hydraulic interconnectivity between the different aquifers at depth and enable vigorous heat and mass transport which causes a mixing of warm and saline groundwater with cold and less saline groundwater within both aquifers. In areas where the Rupelian Aquitard confines the Mesozoic aquifer, dissolved solutes from major salt structures are transported laterally giving rise to plumes of variable salinity content ranging from few hundreds of meters to several tens of kilometers. Furthermore, destabilizing thermal buoyancy forces may overwhelm counteracting stabilizing salinity induced forces offside of salt domes. This may result in buoyant upward groundwater flow transporting heat and mass to shallower levels within the same Mesozoic Aquifer.
Silicon (Si), although not considered essential, has beneficial effects on plant growth which are mostly associated with the ability to accumulate amorphous (phytogenic) Si, e.g., as phytoliths. Phytogenic Si is the most active Si pool in the soil-plant system because of its great surface-to-volume ratio, amorphous structure, and high water solubility. Despite the high abundance of Si in terrestrial biogeosystems and its importance, e.g., for the global C cycle, little is known about Si fluxes between soil and plants and Si pools used by plants. This study aims at elucidating the contribution of various soil Si pools to Si uptake by wheat. As pH affects dissolution of Si pools and Si uptake by plants, the effect of pH (4.5 and 7) was evaluated. Wheat was grown on Si-free pellets mixed with one of the following Si pools: quartz sand (crystalline), anorthite powder (crystalline), or silica gel (amorphous). Silicon content was measured in aboveground biomass, roots, and soil solution 4 times in intervals of 7 d. At pH 4.5, plants grew best on anorthite, but pH did not significantly affect Si-uptake rates. Total Si contents in plant biomass were significantly higher in the silica-gel treatment compared to all other treatments, with up to 26 mg g(-1) in aboveground biomass and up to 17 mg g(-1) in roots. Thus, Si uptake depends on the conversion of Si into plant-available silicic acid. This conversion occurs too slowly for crystalline Si phases, therefore Si uptake from treatments with quartz sand and anorthite did not differ from the control. For plants grown on silica gel, real Si-uptake rates were higher than the theoretical value calculated based on water transpiration. This implies that Si uptake by wheat is driven not only by passive water flux but also by active transporters, depending on Si concentration in the aqueous phase, thus on type of Si pool. These results show that Si uptake by plants as well as plant growth are significantly affected by the type of Si pool and factors controlling its solubility.
The terrestrial biosphere is a key component of the global carbon cycle and its carbon balance is strongly influenced by climate. Continuing environmental changes are thought to increase global terrestrial carbon uptake. But evidence is mounting that climate extremes such as droughts or storms can lead to a decrease in regional ecosystem carbon stocks and therefore have the potential to negate an expected increase in terrestrial carbon uptake. Here we explore the mechanisms and impacts of climate extremes on the terrestrial carbon cycle, and propose a pathway to improve our understanding of present and future impacts of climate extremes on the terrestrial carbon budget.
Agricultural soils have a high potential for sequestration of atmospheric carbon due to their volume and several promising management options. However, there is a remarkable lack of information about the status quo of organic carbon in agricultural soils. In this study a comprehensive data set of 384 cropland soils and 333 grassland soils within the state of Bavaria in southeast Germany was analyzed in order to provide representative information on total amount, regional distribution and driving parameters of soil organic carbon (SOC) and nitrogen (N) in agricultural soils of central Europe. The results showed that grassland soils stored higher amounts of SOC (11.8 kg m(-2)) and N (0.92 kg m(-2)) than cropland soils (9.0 and 0.66 kg m(-2), respectively) due to moisture-induced accumulation of soil organic matter (SOM) in B horizons. Surprisingly, no distinct differences were found for the A horizons since tillage led to a relocation of SOM with depth in cropland soils. Statistical analyses of driving factors for SOM storage revealed soil moisture, represented by the topographic wetness index (TWI), as the most important parameter for both cropland and grassland soils. Climate effects (mean annual temperature and precipitation) were of minor importance in agricultural soils because management options counteracted them to a certain extent, particularly in cropland soils. The distribution of SOC and N stocks within Bavaria based on agricultural regions confirmed the importance of soil moisture since the highest cropland SOC and N stocks were found for tertiary hills and loess regions, which exhibited large areas with potentially high soil moisture content in extant floodplains. Grassland soils showed the highest accumulation of SOC and N in the Alps and Pre-Alps as a result of low temperatures, high amounts of precipitation and high soil moisture content in areas of glacial denudation. Soil class was identified as a further driving parameter for SOC and N storage in cropland soils. In total, cropland and grassland soils in Bavaria store 242 and 134 Mt SOC as well as 19 and 12 Mt N down to a soil depth of 1 m or the parent material, respectively.
The occurrence of neritic microbial carbonates is often related to ecological refuges, where grazers and other competitors are reduced by environmental conditions, or to post-extinction events (e.g. in the Late Devonian, Early Triassic). Here, we present evidence for Middle Jurassic (Bajocian) microbial mounds formed in the normal marine, shallow neritic setting of an inner, ramp system from the High Atlas of Morocco. The microbial mounds are embedded in cross-bedded oolitic facies. Individual mounds show low relief domal geometries (up to 3 m high and 4.5 m across), but occasionally a second generation of mounds exhibits tabular geometries (<1 m high). The domes are circular in plan view and have intact tops, lacking evidence of current influence on mound preferred growth direction or distribution patterns, or truncation. The mound fades consists almost entirely of non-laminated, micritic thrombolites with branching morphologies and fine-grained, clotted and peloidal fabrics. Normal marine biota are present but infrequent. Several lines of evidence document that microbial mound growth alternates with time intervals of active ooid shoal deposition. This notion is of general significance when compared with modern Bahamian microbialites that co-exist with active sub-aquatic dunes. Furthermore, the lack of detailed studies of Middle Jurassic, normal marine shallow neritic microbial mounds adds a strong motivation for the present study. Specifically, Bajocian mounds formed on a firmground substratum during transgressive phases under condensed sedimentation. Furthermore, a transient increase in nutrient supply in the prevailing mesotrophic setting, as suggested by the heterotrophic-dominated biota, may have controlled microbial mound stages.
High applications of P fertilizers and manure are general practice in intensive agriculture and may cause eutrophication in adjacent streams. Bioavailability of P can be estimated by sequential extractions commonly used for soil or sediment. A single combined method may facilitate more effective comparisons of topsoils and adjoining stream sediments, and enhance management decisions. In this study, the suitability of an established soil P sequential extraction was tested on stream bed sediments. The study was conducted in the Sumas River watershed in the agricultural Lower Fraser Valley, Canada. Sediment samples with differing land use (forest, low and high intensity agriculture) from 1993, 1994, 2008, and 2009 from 14 sites along the Sumas River and tributaries were used. Total sequential extraction concentrations were in agreement with aqua regia digestion (Rs=0.96) and showed consistency over the study time sequence. P fractions released by 0.5 M NaHCO3 (median 14 %), 0.1 M NaOH (33 %), and 1.0 M HCl (38 %) were significantly (alpha=0.05) higher than P released by other extractants. These three extraction steps provide a practical and time-effective assessment of P lability in stream sediments and may be used as a combined scheme for sediment and soil. Analytical results further revealed that land use has a major and characteristic impact on P lability. With a land use change from forest to intensive agriculture, results showed an increase in total P concentrations (30 to 4,000 ppm) and in P lability, in particular for the moderately labile NaOH-P fraction (20 to 50 %).
Environmental parameters such as rainfall, temperature and relative humidity can affect the composition of higher plant leaf wax. The abundance and distribution of leaf wax biomarkers, such as long chain n-alkanes, in sedimentary archives have therefore been proposed as proxies reflecting climate change. However, a robust palaeoclimatic interpretation requires a thorough understanding of how environmental changes affect leaf wax n-alkane distributions in living plants. We have analysed the concentration and chain length distribution of leaf wax n-alkanes in Acacia and Eucalyptus species along a 1500 km climatic gradient in northern Australia that ranges from subtropical to arid. We show that aridity affected the concentration and distribution of n-alkanes for plants in both genera. For both Acacia and Eucalyptus n-alkane concentration increased by a factor of ten to the dry centre of Australia, reflecting the purpose of the wax in preventing water loss from the leaf. Furthermore, Acacian-alkanes decreased in average chain length (ACL) towards the arid centre of Australia, whereas Eucalyptus ACL increased under arid conditions. Our observations demonstrate that n-alkane concentration and distribution in leaf wax are sensitive to hydroclimatic conditions. These parameters could therefore potentially be employed in palaeorecords to estimate past environmental change. However, our finding of a distinct response of n-alkane ACL values to hydrological changes in different taxa also implies that the often assumed increase in ACL under drier conditions is not a robust feature for all plant species and genera and as such additional information about the prevalent vegetation are required when ACL values are used as a palaeoclimate proxy.
The impact of land use changes on sustainable development is of increasing interest in many regions of the world. This study aimed to test the transferability of the Framework for Participatory Impact Assessment (FoPIA), which was originally developed in the European context, to developing countries, in which lack of data often prevents the use of data-driven impact assessment methods. The core aspect of FoPIA is the stakeholder-based assessment of alternative land use scenarios. Scenario impacts on regional sustainability are assessed by using a set of nine regional land use functions (LUFs), which equally cover the economic, social and environmental dimensions of sustainability. The cases analysed in this study include (1) the alternative spatial planning policies around the Merapi volcano and surrounding areas of Yogyakarta City, Indonesia; (2) the large-scale afforestation of agricultural areas to reduce soil erosion in Guyuan, China; (3) the expansion of soil and water conservation measures in the Oum Zessar watershed, Tunisia; (4) the agricultural intensification and the potential for organic agriculture in Bijapur, India; and (5) the land degradation and land conflicts resulting from land division and privatisation in Narok, Kenya. All five regions are characterised by population growth, partially combined with considerable economic development, environmental degradation problems and social conflicts. Implications of the regional scenario impacts as well as methodological aspects are discussed. Overall, FoPIA proved to be a useful tool for diagnosing regional human-environment interactions and for supporting the communication and social learning process among different stakeholder groups.
The coastal stretch of north-eastern Mediterranean Morocco holds vitally important ecological, social, and economic functions. The implementation of large-scale luxury tourism resorts shall push socio-economic development and facilitate the shift from a mainly agrarian to a service economy. Sufficient water availability and intact beaches are among the key requirements for the successful realization of regional development plans. The water situation is already critical, additional water-intense sectors could overstrain the capacity of water resources. Further, coastal erosion caused by sea-level rise is projected. Regional climate change is observable, and must be included in regional water management. Long-term climate trends are assessed for the larger region (Moulouya basin) and for the near-coastal zone at Saidia. The amount of additional water demand is assessed for the large-dimensioned Saidia resort; including the monthly, seasonal and annual tourist per capita water need under inclusion of irrigated golf courses and garden areas. A shift of climate patterns is observed, a lengthening of the dry summer season, and as well a significant decline of annual precipitation. Thus, current water scarcity is mainly human-induced; however, climate change will aggravate the situation. As a consequence, severe environmental damage due to water scarcity is likely and could impinge on the quality of local tourism. The re-adjustment of current management routines is therefore essential. Possible adjustments are discussed and the analysis concludes with management recommendations for innovative regional water management of tourism facilities.
Flood risk is expected to increase in many regions of the world in the next decades with rising flood losses as a consequence. First and foremost, it can be attributed to the expansion of settlement and industrial areas into flood plains and the resulting accumulation of assets. For a future-oriented and a more robust flood risk management, it is therefore of importance not only to estimate potential impacts of climate change on the flood hazard, but also to analyze the spatio-temporal dynamics of flood exposure due to land use changes. In this study, carried out in the Alpine Lech Valley in Tyrol (Austria), various land use scenarios until 2030 were developed by means of a spatially explicit land use model, national spatial planning scenarios and current spatial policies. The combination of the simulated land use patterns with different inundation scenarios enabled us to derive statements about possible future changes in flood-exposed built-up areas. The results indicate that the potential assets at risk depend very much on the selected socioeconomic scenario. The important conditions affecting the potential assets at risk that differ between the scenarios are the demand for new built-up areas as well as on the types of conversions allowed to provide the necessary areas at certain locations. The range of potential changes in flood-exposed residential areas varies from no further change in the most moderate scenario 'Overall Risk' to 119 % increase in the most extreme scenario 'Overall Growth' (under current spatial policy) and 159 % increase when disregarding current building restrictions.
Siberian larch forests and the ion content of thaw lakes form a geochemically functional entity
(2013)
Siberian larch forests growing on shallow permafrost soils have not, until now, been considered to be controlling the abiotic and biotic characteristics of the vast number of thaw-lake ecosystems. Here we show, using four independent data sets (a modern data set from 201 lakes from the tundra to taiga, and three lake-core records), that lake-water geochemistry in Yakutia is highly correlated with vegetation. Alkalinity increases with catchment forest density. We postulate that in this arid area, higher evapotranspiration in larch forests compared with that in the tundra vegetation leads to local salt accumulation in soils. Solutes are transported to nearby thaw lakes during rain events and snow melt, but are not fully transported into rivers, because there is no continuous groundwater flow within permafrost soils. This implies that potentially large shifts in the chemical characteristics of aquatic ecosystems to known warming are absent because of the slow response of catchment forests to climate change.
Natural and human-induced erosion supplies high amounts of soil organic carbon (OC) to terrestrial drainage networks. Yet OC fluxes in rivers were considered in global budgets only recently. Modern estimates of annual carbon burial in inland river sediments of 0.6 Gt C, or 22% of C transferred from terrestrial ecosystems to river channels, consider only lakes and reservoirs and disregard any long-term carbon burial in hillslope or floodplain sediments. Here we present the first assessment of sediment-bound OC storage in Central Europe from a synthesis of similar to 1500 Holocene hillslope and floodplain sedimentary archives. We show that sediment storage increases with drainage-basin size due to more extensive floodplains in larger river basins. However, hillslopes retain hitherto unrecognized high amounts of eroded soils at the scale of large river basins such that average agricultural erosion rates during the Holocene would have been at least twice as high as reported previously. This anthropogenic hillslope sediment storage exceeds floodplain storage in drainage basins <10(5) km(2), challenging the notion that floodplains are the dominant sedimentary sinks. In terms of carbon burial, OC concentrations in floodplains exceed those on hillslopes, and net OC accumulation rates in floodplains (0.70.2 g C m(-2)a(-1)) surpass those on hillslopes (0.40.1 g C m(-2)a(-1)) over the last 7500 years. We conclude that carbon burial in floodplains and on hillslopes in Central Europe exceeds terrestrial carbon storage in lakes and reservoirs by at least 2 orders of magnitude and should thus be considered in continental carbon budgets.
The tectonically driven growth of mountains reflects the characteristics of the underlying fault systems and the applied tectonic forces. Over time, fault networks might be relatively static, but stress conditions could change and result in variations in fault slip orientation. Such a tectonic landscape would transition from a simple to a composite state: the topography of simple landscapes is correlated with a single set of tectonic boundary conditions, while composite landscapes contain inherited topography due to earlier deformation under different boundary conditions. We use fault interaction modeling to compare vertical displacement fields with topographic metrics to differentiate the two types of landscapes. By successively rotating the axis of maximum horizontal stress, we produce a suite of vertical displacement fields for comparison with real landscapes. We apply this model to a transpressional duplex in the south central Alborz Mountains of Iran, where NW oriented compression was superseded by neotectonic NE compression. The consistency between the modeled displacement field and real landforms indicates that the duplex topography is mostly compatible with the modern boundary conditions, but might include a small remnant from the earlier deformation phase. Our approach is applicable for various tectonic settings and represents an approach to identify the changing boundary conditions that produce composite landscapes. It may be particularly useful for identifying changes that occurred in regions where river profiles may no longer record a signal of the change or where the spatial pattern of uplift is complex.
The hypersaline crater lake and its catchment on seabird island Isabel (Pacific, off Mexico) was studied to explore the influence of strong seasonal variations in rainfall/evaporation and guano contribution on its limnology. The hypersaline lake water (HSW, 78 %) is up to 2.2-times enriched in inert ions relative to mean seawater. Rainfall during summer dilutes the HSW to form a less saline rainwater body (RWB) above a chemolimnion between 2 and 4 m water depth. The RWB is inhabited first by diatoms and ostracods followed later on by cyanobacteria and ciliates. Evaporation of > 1.5 m depth of lake water over the dry season increases the salinity of the RWB until the water column becomes isohaline at HSW concentrations in the late dry season. Differences in the stable isotope composition of water and primary producers in RWB and HSW reflect this development. Introduction of seabird guano and the decrease of salinity fuel a high primary production in the RWB with higher delta(CDIC)-C-13 and delta(13)Corg of particulate organic matter than in the HSW. The high N supply leads to high delta N-15 NH4 values (+ 39 % in the HSW) as the consequence of ammonia volatilization that is strongest during guano maturation and with evaporative salinity increase from the HSW. Precipitation of carbonate (calcite and aragonite) from the RWB and the HSW is hindered by the high concentration of guano-derived P. This inhibition may be overcome with evaporative supersaturation during particularly dry conditions. Carbonate may also precipitate during particularly wet conditions from the dilute RWB, where the P-concentration is reduced during an active phytoplankton production that raises the pH. Differences in the stable isotope signatures of carbon and oxygen in HSW and RWB (+ 5 % delta(CDIC)-C-13 and -3 % d18OH2O) suggest the processes of carbonate precipitation can be distinguished based on the isotope signature of the carbonates deposited. Changes in the lake system are indicated when lower temperatures and higher rainfall in the 2006 wet season introduced more and less mature guano to the lake. The lower pH was accompanied by lower ammonia volatilization and carbonate precipitation as indicated by an increased concentration of NH4, Ca, Sr and DIC, while delta H-2, delta(NNH4)-N-15, and salinity were lower. According to our results, the observed sediment laminations should reflect the introduction of catchment material (including guano) with runoff, the RWB plankton production, and the carbonate precipitation in relation to its origin and seasonality.
We document Quaternary fluvial incision driven by fault-controlled surface deformation in the inverted intermontane Gökirmak Basin in the Central Pontide mountains along the northern margin of the Central Anatolian Plateau. In-situ-produced Be-10, Ne-21, and Cl-36 concentrations from gravel-covered fluvial terraces and pediment surfaces along the trunk stream of the basin (the Gökirmak River) yield model exposure ages ranging from 71ka to 34645ka and average fluvial incision rates over the past similar to 350ka of 0.280.01mm a(-1). Similarities between river incision rates and coastal uplift rates at the Black Sea coast suggest that regional uplift is responsible for the river incision. Model exposure ages of deformed pediment surfaces along tributaries of the trunk stream range from 605ka to 110 +/- 10ka, demonstrating that the thrust faults responsible for pediment deformation were active after those times and were likely active earlier as well as explaining the topographic relief of the region. Together, our data demonstrate cumulative incision that is linked to active internal shortening and uplift of similar to 0.3mm a(-1) in the Central Pontide orogenic wedge, which may ultimately contribute to the lateral growth of the northern Anatolian Plateau.
The electricity system is particularly susceptible to climate change due to the close interconnectedness between electricity production, consumption and climate. This study provides a country based relative analysis of 21 European countries' electricity system susceptibility to climate change. Taking into account 14 quantitative influencing factors, the susceptibility of each country is examined both for the current and projected system with the result being a relative ranked index. Luxembourg and Greece are the most susceptible relatively due in part to their inability to meet their own electricity consumption demand with inland production, and the fact that the majority of their production is from more susceptible sources, primarily combustible fuels. Greece experiences relatively warm mean temperatures, which are expected to increase in the future leading to greater summer electricity consumption, increasing susceptibility. Norway was found to be the least susceptible, relatively, due to its consistent production surplus, which is primarily from hydro (a less susceptible source) and a likely decrease of winter electricity consumption as temperatures rise due to climate change. The findings of this study enable countries to identify the main factors that increase their electricity system susceptibility and proceed with adaptation measures that are the most effective in decreasing susceptibility.
This study aims to establish, evaluate, and apply a modern pollen-climate transfer function from the transition zone between arctic tundra and light-needled taiga in Arctic Siberia. Lacustrine samples (n = 96) from the northern Siberian lowlands of Yakutia were collected along four north-to-south transects crossing the arctic forest line. Samples span a broad temperature and precipitation gradient (mean July temperature, T-July: 7.5-18.7 degrees C; mean annual precipitation, P-ann: 114-315 mm/yr). Redundancy analyses are used to examine the relationship between the modern pollen signal and corresponding vegetation types and climate. Performance of transfer functions for T-July and P-ann were cross-validated and tested for spatial autocorrelation effects. The root mean square errors of prediction are 1.67 degrees C for T-July and 40 mm/yr for P-ann. A climate reconstruction based on fossil pollen spectra from a Siberian Arctic lake sediment core spanning the Holocene yielded cold conditions for the Late Glacial (1-2 degrees C below present T-July). Warm and moist conditions were reconstructed for the early to mid Holocene (2 degrees C higher T-July than present), and climate conditions similar to modern ones were reconstructed for the last 4000 years. In conclusion, our modern pollen data set fills the gap of existing regional calibration sets with regard to the underrepresented Siberian tundra-taiga transition zone. The Holocene climate reconstruction indicates that the temperature deviation from modern values was only moderate despite the assumed Arctic sensitivity to present climate change.
Raman microspectroscopy on carbonaceous material (RSCM) from the eastern Tauern Window indicates contrasting peak-temperature patterns in three different fabric domains, each of which underwent a poly-metamorphic orogenic evolution: Domain 1 in the northeastern Tauern Window preserves oceanic units (Glockner Nappe System, Matrei Zone) that attained peak temperatures (T-p) of 350-480 degrees C following Late Cretaceous to Palaeogene nappe stacking in an accretionary wedge. Domain 2 in the central Tauern Window experienced T-p of 500-535 degrees C that was attained either within an exhumed Palaeogene subduction channel or during Oligocene Barrovian-type thermal overprinting within the Alpine collisional orogen. Domain 3 in the Eastern Tauern Subdome has a peak-temperature pattern that resulted from Eo-Oligocene nappe stacking of continental units derived from the distal European margin. This pattern acquired its presently concentric pattern in Miocene time due to post-nappe doming and extensional shearing along the Katschberg Shear Zone System (KSZS). T-p values in the largest (Hochalm) dome range from 612 degrees C in its core to 440 degrees C at its rim. The maximum peak-temperature gradient (70 degrees Ckm(-1)) occurs along the eastern margin of this dome where mylonitic shearing of the Katschberg Normal Fault (KNF) significantly thinned the Subpenninic- and Penninic nappe pile, including the pre-existing peak-temperature gradient.
Silicate weathering - initiated by major mineralogical transformations at the base of ten meters of clay-rich saprolite generates the exceptionally low weathering flux found in streams draining the crystalline rocks of the mountainous and humid tropical Highlands of Sri Lanka. This conclusion is reached from a thorough investigation of the mineralogical, chemical, and Sr isotope compositions of samples within a regolith profile extending >10 m from surface soil through the weathering front in charnockite bedrock (a high-grade metamorphic rock), corestones formed at the weathering front, as well as from the chemical composition of the dissolved loads in nearby streams. Weatherable minerals and soluble elements are fully depleted at the top of the profile, showing that the system is supply-limited, such that weathering fluxes are controlled directly by the supply of fresh minerals. We determine the weathering rates using two independent means: (1) in situ-produced cosmogenic nuclides in surface soil and creek sediments in the close vicinity of the regolith combined with immobile element mass balance across the regolith and (2) river dissolved loads. Silicate weathering rates determined from both approaches range from 16 to 36 t km(-2) y(-1), corresponding to a weathering front advance rate of 6-14 mm ky(-1). These rates agree across the 10(1) to 10(4) - y time scales over which our rate metrics integrate, suggesting that the weathering system operates at steady state. Within error these rates are furthermore compatible with those obtained by modeling the advance rate of the weathering front from chemical gradients and mineral dissolution rates. The silicate weathering flux out of the weathering profile, measured on small creeks, amounts to 84% of the profile's export flux; the remaining 16% is contributed by non-silicate, atmospheric-derived input. The silicate weathering flux, as measured by dissolved loads in large catchments, amounts to ca. 50% of the total dissolved flux; the remainder being contributed by dust, rain, and weathering of local marble bands. Spheroidal weathering is the key processes of converting the fresh bedrock into saprolite at the weathering front. The mineralogical composition of weathering rinds shows that the sequence of mineral decomposition is: pyroxene; plagioclase; biotite; K-feldspar. Observable biotite alteration does not appear to initiate spheroidal weathering within corestones; therefore, we infer that other processes than biotite oxidation, like pyroxene oxidation, clay formation from pyroxene and plagioclase decomposition, the development of secondary porosity by plagioclase dissolution, or even microbiologic processes at depth enable the coupling between slow advance of the weathering front and slow erosion at the surface. The comparison to tectonically more active tropical landscapes lets us conclude that the combination of hard rock with tightly interlocked mineral grains and slow erosion in the absence of tectonically-induced landscape rejuvenation lead to these exceptionally low weathering rates. (C) 2013 Elsevier Ltd. All rights reserved.
In the recent past, the Alpine Lech valley (Austria) experienced three damaging flood events within 6 years despite the various structural flood protection measures in place. For an improved flood risk management, the analysis of flood damage potentials is a crucial component. Since the expansion of built-up areas and their associated values is seen as one of the main drivers of rising flood losses, the goal of this study is to analyze the spatial development of the assets at risk, particularly of residential areas, due to land use changes over a historic period (since 1971) and up to possible shifts in future (until 2030). The analysis revealed that the alpine study area was faced to remarkable land use changes like urbanization and the decline of agriculturally used grassland areas. Although the major agglomeration of residential areas inside the flood plains took place before 1971, a steady growth of values at risk can still be observed until now. Even for the future, the trend is ongoing, but depends very much on the assumed land use scenario and the underlying land use policy. Between 1971 and 2006, the annual growth rate of the damage potential of residential areas amounted to 1.1 % ('constant values,' i.e., asset values at constant prices of reference year 2006) or 3.0 % ('adjusted values,' i.e., asset values adjusted by GDP increase at constant prices of reference year 2006) for three flood scenarios. For the projected time span between 2006 and 2030, a further annual increase by 1.0 % ('constant values') or even 4.2 % ('adjusted values') may be possible when the most extreme urbanization scenario 'Overall Growth' is considered. Although socio-economic development is regarded as the main driver for increasing flood losses, our analysis shows that settlement development does not preferably take place within flood prone areas.
Pseudotachylyte veins frequently associated with mylonites and ultramylonites occur within migmatitic paragneisses, metamonzodiorites, as well as felsic and mafic granulites at the base of the section of the Hercynian lower crust exposed in Calabria (Southern Italy). The crustal section is tectonically superposed on lower grade units. Ultramylonites and pseudotachylytes are particularly well developed in migmatitic paragneisses, whereas sparse fault-related pseudotachylytes and thin mylonite/ultramylonite bands occur in granulite-facies rocks. The presence of sillimanite and clinopyroxene in ultramylonites and mylonites indicates that relatively high-temperature conditions preceded the formation of pseudotachylytes. We have analysed pseudotachylytes from different rock types to ascertain their deep crustal origin and to better understand the relationships between brittle and ductile processes during deformation of the deeper crust. Different protoliths were selected to test how lithology controls pseudotachylyte composition and textures. In migmatites and felsic granulites, euhedral or cauliflower-shaped garnets directly crystallized from pseudotachylyte melts of near andesitic composition. This indicates that pseudotachylytes originated at deep crustal conditions (> 0.75 GPa). In mafic protoliths, quenched needle-to-feather-shaped high-alumina orthopyroxene occurs in contact with newly crystallized plagioclase. The pyroxene crystallizes in garnet-free and garnet-bearing veins. The simultaneous growth of orthopyroxene and plagioclase as well as almandine, suggests lower crustal origin, with pressures in excess of 0.85 GPa. The existence of melts of different composition in the same vein indicates the stepwise, non-equilibrium conditions of frictional melting. Melt formed and intruded into pre-existing anisotropies. In mafic granulites, brittle faulting is localized in a previously formed thin high-temperature mylonite bands. migmatitic gneisses are deformed into ultramylonite domains characterized by s-c fabric. Small grain size and fluids lowered the effective stress on the c planes favouring a seismic event and the consequent melt generation. Microstructures and ductile deformation of pseudotachylytes suggest continuous ductile flow punctuated by episodes of high-strain rate, leading to seismic events and melting.
In probabilistic seismic-hazard analysis, epistemic uncertainties are commonly treated within a logic-tree framework in which the branch weights express the degree of belief of an expert in a set of models. For the calculation of the distribution of hazard curves, these branch weights represent subjective probabilities. A major challenge for experts is to provide logically consistent weight estimates (in the sense of Kolmogorovs axioms), to be aware of the multitude of heuristics, and to minimize the biases which affect human judgment under uncertainty. We introduce a platform-independent, interactive program enabling us to quantify, elicit, and transfer expert knowledge into a set of subjective probabilities by applying experimental design theory, following the approach of Curtis and Wood (2004). Instead of determining the set of probabilities for all models in a single step, the computer-driven elicitation process is performed as a sequence of evaluations of relative weights for small subsets of models. From these, the probabilities for the whole model set are determined as a solution of an optimization problem. The result of this process is a set of logically consistent probabilities together with a measure of confidence determined from the amount of conflicting information which is provided by the expert during the relative weighting process. We experiment with different scenarios simulating likely expert behaviors in the context of knowledge elicitation and show the impact this has on the results. The overall aim is to provide a smart elicitation technique, and our findings serve as a guide for practical applications.
Digital flow networks derived from digital elevation models (DEMs) sensitively react to errors due to measurement, data processing and data representation. Since high-resolution DEMs are increasingly used in geomorphological and hydrological research, automated and semi-automated procedures to reduce the impact of such errors on flow networks are required. One such technique is stream-carving, a hydrological conditioning technique to ensure drainage connectivity in DEMs towards the DEM edges. Here we test and modify a state-of-the-art carving algorithm for flow network derivation in a low-relief, agricultural landscape characterized by a large number of spurious, topographic depressions. Our results show that the investigated algorithm reconstructs a benchmark network insufficiently in terms of carving energy, distance and a topological network measure. The modification to the algorithm that performed best, combines the least-cost auxiliary topography (LCAT) carving with a constrained breaching algorithm that explicitly takes automatically identified channel locations into account. We applied our methods to a low relief landscape, but the results can be transferred to flow network derivation of DEMs in moderate to mountainous relief in situations where the valley bottom is broad and flat and precise derivations of the flow networks are needed.
Surface lake sediments, 28 from Hoh Xil, 24 from northeastern China, 99 from Lake Bosten, 31 from Ulungur and 26 from Heihai were collected to determine C-13 and O-18 values. Considering the impact factors, conductivity, alkalinity, pH, TOC, C/N and carbonate-content in the sediments, Cl, P, S, and metal element ratios of Mg/Ca, Sr/Ca, Fe/Mn of bulk sediments as environmental variables enable evaluation of their influences on C-13 and O-18 using principal component analysis (PCA) method. The closure and residence time of lakes can influence the correlation between C-13 and O-18. Lake water will change from fresh to brackish with increasing reduction and eutrophication effects. Mg/Ca in the bulk sediment indicates the characteristic of residence time, Sr/Ca and Fe/Mn infer the salinity of lakes. Carbonate formation processes and types can influence the C-13-O-18 correlation. O-18 will be heavier from Mg-calcite and aragonite formed in a high-salinity water body than calcite formed in freshwater conditions. When carbonate content is less than 30%, there is no relationship with either C-13 or O-18, and also none between C-13 and O-18. More than 30%, carbonate content, however, co-varies highly to C-13 and O-18, and there is also a high correlation between C-13 and O-18. Vegetation conditions and primary productivity of lakes can influence the characteristics of C-13 and O-18, and their co-variance. Total organic matter content (TOC) in the sediments is higher with more terrestrial and submerged plants infilling. In northeastern and northwestern China, when organic matter in the lake sediments comes from endogenous floating organisms and algae, the C-13 value is high. C-13 is in the range of -4%o to 0 parts per thousand when organic matter comes mainly from floating organisms (C/N<6); in the range of -4 parts per thousand to 8 parts per thousand when organic matter comes from diatoms (C/N=6 to 8); and -8 parts per thousand to -4 parts per thousand when organic matter comes from aquatic and terrestrial plants (C/N>8).
Reliable hydrological monitoring is the basis for sound water management in drained wetlands. Since statistical methods cannot be employed for unobserved or sparsely monitored areas, the primary design (first set-up) may be arbitrary in most instances. The objective of this paper is therefore to provide a guideline for designing the initial hydrological monitoring network. A scheme is developed that handles different parts of monitoring and hydrometry in wetlands, focusing on the positioning of surface water and groundwater gauges. For placement of the former, control units are used which correspond to areas whose water levels can be regulated separately. The latter are arranged depending on hydrological response units, defined by combinations of soil type and land use, and the chosen surface water monitoring sites. A practical application of the approach is shown for an investigation area in the Spreewald region in north-east Germany. The presented scheme leaves a certain degree of freedom to its user, allowing the inclusion of expert knowledge or special concerns. Based on easily obtainable data, the developed hydrological network serves as a first step in the iterative procedure of monitoring network optimisation. Copyright (c) 2013 John Wiley & Sons, Ltd.
A new sedimentary sequence from Lago di Venere on Pantelleria Island, located in the Strait of Sicily between Tunisia and Sicily was recovered. The lake is located in the coastal infra-Mediterranean vegetation belt at 2 m a.s.l. Pollen, charcoal and sedimentological analyses are used to explore linkages among vegetation, fire and climate at a decadal scale over the past 1200 years. A dry period from ad 800 to 1000 that corresponds to the Medieval Warm Period' (WMP) is inferred from sedimentological analysis. The high content of carbonate recorded in this period suggests a dry phase, when the ratio of evaporation/precipitation was high. During this period the island was dominated by thermophilous and drought-tolerant taxa, such as Quercus ilex, Olea, Pistacia and Juniperus. A marked shift in the sediment properties is recorded at ad 1000, when carbonate content became very low suggesting wetter conditions until ad 1850-1900. Broadly, this period coincides with the Little Ice Age' (LIA), which was characterized by wetter and colder conditions in Europe. During this time rather mesic conifers (i.e. Pinus pinaster), shrubs and herbs (e.g. Erica arborea and Selaginella denticulata) expanded, whereas more drought-adapted species (e.g. Q. ilex) declined. Charcoal data suggest enhanced fire activity during the LIA probably as a consequence of anthropogenic burning and/or more flammable fuel (e.g. resinous Pinus biomass). The last century was characterized by a shift to high carbonate content, indicating a change towards drier conditions, and re-expansion of Q. ilex and Olea. The post-LIA warming is in agreement with historical documents and meteorological time series. Vegetation dynamics were co-determined by agricultural activities on the island. Anthropogenic indicators (e.g. Cerealia-type, Sporormiella) reveal the importance of crops and grazing on the island. Our pollen data suggest that extensive logging caused the local extinction of deciduous Quercus pubescens around ad1750.
The Upper Cretaceous shallow-water carbonates of the Pyrenean Basin (NE Spain) host rich and diverse larger foraminiferal associations which witness the recovery of this group of protozoans after the dramatic extinction of the Cenomanian-Turonian boundary interval. In this paper a new, large discoidal porcelaneous foraminifer, Broeckina gassoensis sp. nov., is described from the middle Coniacian shallow-water deposits of the Collada Gasso Formation, in the Boixols Thrust Sheet. This is the first complex porcelaneous larger foraminifer of the Late Cretaceous global community maturation cycle recorded in the Pyrenean bioprovince. It differs from the late Santonian-early Campanian B. dufrenoyi for its smaller size in A and B generations and the less developed endoskeleton, which shows short septula. Broeckina gassoensis sp. nov. has been widely employed as a stratigraphic marker in the regional geological literature, under the name of "Broeckina", but its age was so far controversial. Its middle Coniacian age (lowermost part of the Peroniceras tridorsatum ammonite zone), established in this paper by strontium isotope stratigraphy, indicates that it took about 5 My after the Cenomanian-Turonian boundary crisis to re-evolve the complex test architecture of larger foraminifera, which is functional to their relation with photosymbiotic algae and K-strategy.
An important tool for understanding deformation occurring within a subduction zone is the measurement of seismic anisotropy through observations of shear wave splitting (SWS). In Sumatra, two temporary seismic networks were deployed between December 2007 and February 2009, covering the fore arc between the fore-arc islands to the back arc. We use SKS and local SWS measurements to determine the type, amount, and location of anisotropy. Local SWS measurements from the fore-arc islands exhibit trench-parallel fast directions which can be attributed to shape preferred orientation of cracks/fractures in the overriding sediments. In the Sumatran Fault region, the predominant fast direction is fault/trench parallel, while in the back-arc region it is trench perpendicular. The trench-perpendicular measurements exhibit a positive correlation between delay time and raypath length in the mantle wedge, while the fault-parallel measurements are similar to the fault-parallel fast directions observed for two crustal events at the Sumatran Fault. This suggests that there are two layers of anisotropy: one due to entrained flow within the mantle wedge and a second layer within the overriding crust due to the shear strain caused by the Sumatran Fault. SKS splitting results show a NNW-SSE fast direction with delay times of 0.8-3.0s. The fast directions are approximately parallel to the absolute plate motion of the subducting Indo-Australian Plate. The small delay times exhibited by the local SWS (0.05-0.45s), in combination with the large SKS delay times, suggest that the anisotropy generating the teleseismic SWS is dominated by entrained flow in the asthenosphere below the slab.
Increases in animal products consumption and the associated environmental consequences have been a matter of scientific debate for decades. Consequences of such increases include rises in greenhouse gas emissions, growth of consumptive water use, and perturbation of global nutrients cycles. These consequences vary spatially depending on livestock types, their densities and their production system. In this letter, we investigate the spatial distribution of embodied crop calories in animal products. On a global scale, about 40% of the global crop calories are used as livestock feed (we refer to this ratio as crop balance for livestock) and about 4 kcal of crop products are used to generate 1 kcal of animal products (embodied crop calories of around 4). However, these values vary greatly around the world. In some regions, more than 100% of the crops produced is required to feed livestock requiring national or international trade to meet the deficit in livestock feed. Embodied crop calories vary between less than 1 for 20% of the livestock raising areas worldwide and greater than 10 for another 20% of the regions. Low values of embodied crop calories are related to production systems for ruminants based on fodder and forage, while large values are usually associated with production systems for non-ruminants fed on crop products. Additionally, we project the future feed demand considering three scenarios: (a) population growth, (b) population growth and changes in human dietary patterns and (c) changes in population, dietary patterns and feed conversion efficiency. When considering dietary changes, we project the global feed demand to be almost doubled (1.8-2.3 times) by 2050 compared to 2000, which would force us to produce almost equal or even more crops to raise our livestock than to directly nourish ourselves in the future. Feed demand is expected to increase over proportionally in Africa, South-Eastern Asia and Southern Asia, putting additional stress on these regions.
Sediments of a thermokarst system on the north-eastern Tibetan Plateau were studied to infer changes in the lacustrine depositional environment related to climatic changes since the early Holocene. The thermokarst pond with a length of 360 m is situated in a 14.5 x 6 km tectonically unaffected intermontane basin, which is underlain by discontinuous permafrost.
A lake sediment core and bankside lacustrine onshore deposits were analysed. Additionally, fossil lake sediments were investigated, which document a former lake-level high stand. The sediments are mainly composed of marls with variable amounts of silt carbonate micrite, and organic matter.
On the basis of sedimentological (grain size data), geochemical (XRF), mineralogical (XRD) and micropaleontological data (ostracods and chironomide assemblages) a reconstruction of a paleolake environment was achieved.
Lacustrine sediments with endogenic carbonate precipitation suggest a lacustrine environment since at least 19.0 cal ka BP. However, because of relocation and reworking processes in the lake, the sediments did not provide distinct information about the ultimate formation of the lake. The high amount of endogenic carbonate suggests prolonged still-water conditions at about 9.3 cal ka BP. Ostracod shells and chironomid head capsules in fossil lake sediments indicate at least one former lake-level high stand, which were developed between the early and middle Holocene. From the late Holocene the area was possibly characterized by a lake-level decline, documented by a hiatus between lacustrine sediments and a reworked loess or loess-like horizon. After the lake-level decline and the following warming period, the area was affected by thermally-induced subsidence and a re-flooding of the basin because of thawing permafrost.
We perform a systematic study of all cities in Europe to assess the Urban Heat Island (UHI) intensity by means of remotely sensed land surface temperature data. Defining cities as spatial clusters of urban land cover, we investigate the relationships of the UHI intensity, with the cluster size and the temperature of the surroundings. Our results show that in Europe, the UHI intensity in summer has a strong correlation with the cluster size, which can be well fitted by an empirical sigmoid model. Furthermore, we find a novel seasonality of the UHI intensity for individual clusters in the form of hysteresis-like curves. We characterize the shape and identify apparent regional patterns.
Seismicity induced by coal mining in the Ruhr region, Germany, has been monitored continuously over the last 25 yr. In 2006, a dense temporary network (HAMNET) was deployed to locally monitor seismicity induced by longwall mining close to the town of Hamm. Between 2006 July and 2007 July, more than 7000 events with magnitudes M-L from -1.7 to 2.0 were detected. The spatiotemporal distribution of seismicity shows high correlation with the mining activity. In order to monitor rupture processes, we set up an automated source inversion routine and successfully perform double couple and full moment tensor (MT) inversions for more than 1000 events with magnitudes above M-L -0.5. The source inversion is based on a full waveform approach, both in the frequency and in the time domain, providing information about the centroid location, focal mechanism, scalar moment and full MT. Inversion results indicate a strong dominance of normal faulting focal mechanisms, with a steeper plane and a subhorizontal one. Fault planes are oriented parallel to the mining stopes. We classify the focal mechanisms based on their orientation and observe different frequency-magnitude distributions for families of events with different focal mechanisms; the overall frequency-magnitude distribution is not fitting the Gutenberg-Richter relation. Full MTs indicate that non-negligible opening tensile components accompanied normal faulting source mechanisms. Finally, extended source models are investigated for largest events. Results suggest that the rupture processes mostly occurred along the subvertical planes.
AimAdvancement in ecological methods predicting species distributions is a crucial precondition for deriving sound management actions. Maximum entropy (MaxEnt) models are a popular tool to predict species distributions, as they are considered able to cope well with sparse, irregularly sampled data and minor location errors. Although a fundamental assumption of MaxEnt is that the entire area of interest has been systematically sampled, in practice, MaxEnt models are usually built from occurrence records that are spatially biased towards better-surveyed areas. Two common, yet not compared, strategies to cope with uneven sampling effort are spatial filtering of occurrence data and background manipulation using environmental data with the same spatial bias as occurrence data. We tested these strategies using simulated data and a recently collated dataset on Malay civet Viverra tangalunga in Borneo.
LocationBorneo, Southeast Asia.
MethodsWe collated 504 occurrence records of Malay civets from Borneo of which 291 records were from 2001 to 2011 and used them in the MaxEnt analysis (baseline scenario) together with 25 environmental input variables. We simulated datasets for two virtual species (similar to a range-restricted highland and a lowland species) using the same number of records for model building. As occurrence records were biased towards north-eastern Borneo, we investigated the efficacy of spatial filtering versus background manipulation to reduce overprediction or underprediction in specific areas.
ResultsSpatial filtering minimized omission errors (false negatives) and commission errors (false positives). We recommend that when sample size is insufficient to allow spatial filtering, manipulation of the background dataset is preferable to not correcting for sampling bias, although predictions were comparatively weak and commission errors increased.
Main ConclusionsWe conclude that a substantial improvement in the quality of model predictions can be achieved if uneven sampling effort is taken into account, thereby improving the efficacy of species conservation planning.
Vertical flow systems filled with porous medium have been shown to efficiently remove volatile organic contaminants (VOCs) from contaminated groundwater. To apply this semi-natural remediation strategy it is however necessary to distinguish between removal due to biodegradation and due to volatile losses to the atmosphere. Especially for (potentially) toxic VOCs, the latter needs to be minimized to limit atmospheric emissions. In this study, numerical simulation was used to investigate quantitatively the removal of volatile organic compounds in two pilot-scale water treatment systems: an unplanted vertical flow filter and a planted one, which could also be called a vertical flow constructed wetland, both used for the treatment of contaminated groundwater. These systems were intermittently loaded with contaminated water containing benzene and MTBE as main VOCs. The highly dynamic but permanently unsaturated conditions in the porous medium facilitated aerobic biodegradation but could lead to volatile emissions of the contaminants. Experimental data from porous material analyses, flow rate measurements, solute tracer and gas tracer test, as well as contaminant concentration measurements at the boundaries of the systems were used to constrain a numerical reactive transport modeling approach. Numerical simulations considered unsaturated water flow, transport of species in the aqueous and the gas phase as well as aerobic degradation processes, which made it possible to quantify the rates of biodegradation and volatile emissions and calculating their contribution to total contaminant removal. A range of degradation rates was determined using experimental results of both systems under two operation modes and validated by field data obtained at different operation modes applied to the filters. For both filters, simulations and experimental data point to high biodegradation rates, if the flow filters have had time to build up their removal capacity. For this case volatile emissions are negligible and total removal can be attributed to biodegradation, only. The simulation study thus supports the use of both of these vertical flow systems for the treatment of groundwater contaminated with VOCs and the use of reactive transport modeling for the assessment of VOCs removal and operation modes in these high performance treatment systems.
We strive to assess soil water content on a well-studied slow-moving hillslope in Austria. In doing so, we employ time lapse mapping of bulk electrical conductivity using a geophysical electromagnetic induction system operated at low induction numbers. This information is complemented by the acquisition of soil samples for gravimetric water content analysis during one survey campaign. Simple visual soil sample analysis reveals that the upper material in the survey area is a spatially highly variable mixture of predominately sandy, silty, clayey and organic materials. Due to this heterogeneity, classical approaches of mapping soil moisture on the basis of stationary mapping of electrical conductivity variations are not successful. Also the time-lapse approach does not allow ruling out some of the ambiguity inherent to the linkage of bulk electrical conductivity to soil water content. However, indication is found that time-lapse measurements may have supportive capabilities to identify regions of low precipitation infiltration due to high soil saturation. Furthermore, the relationship between the mean electrical conductivity averaged over a full vegetation period and an already available ecological moisture map produced by vegetation analysis is found to resemble closely the relationship observed between gravimetric soil water content and electrical conductivity during the time of sample collection except for highly organic soils. This leads us to the assumption that the relative soil moisture distribution is temporarily stable except for those areas characterized by highly organic soils.
Soilscapes of the post-glacial morainic regions of the youngest glaciation are characterized by small hydrological kettle hole catchments forming hummocky soil landscapes. The spatial heterogeneity of subsurface structures as well as erosion-controlled pedogenesis under arable land use may complicate hydrological modeling. Our aim was to generate a soil landscape model for a small representative kettle hole catchment based on geoelectrical exploration and soil profile information. For a 1-ha catchment located in the northeastern German lowlands near the town of Prenzlau, electrical resistivity transects were determined by a multi electrode system (IMPETUS 12 Fs) and electrical conductivity (ECa) was mapped by using the electromagnetic induction (EMI) device EM38DD in both the vertical and horizontal modes. The 1-m digital elevation model (DEM) was obtained by kriging from high resolution manual elevation data determined with a leveling device (ZEISS Ni 40). Soil profile data from 26 boreholes distributed radially around the central pond were used to identify boundaries between soil horizons. The soil is characterized by varying topography and morphology of diagnostic horizons such as M- (colluvium), Bt- (clay illuviation), and C- (parent glacial till). By EMI mapping we identified (i) the boundary between erosive and colluvial areas around the kettle hole, and modeled (ii) the subsurface morphology of loamy horizons. Electrical resistivity tomography results coincide with these findings and allow for distinguishing between sandy and loamy dominated areas both in vertical and horizontal direction, respectively. This soil model of soil textural properties could be used for hydrological modeling.
This study presents the theory, applicability, and merits of the new THERIAK_D add-on for the open source Theriak/Domino software package. The add-on works as an interface between Theriak and user-generated scripts, providing the opportunity to process phase equilibrium computation parameters in a programming environment (e. g., C or MATLABV (R)). THERIAK_D supports a wide range of features such as calculating the solid rock density or testing the stability of mineral phases along any pressure-temperature (P-T) path and P-T grid. To demonstrate applicability, an example is given in which the solid rock density of a 2-D-temperature-pressure field is calculated, portraying a simplified subduction zone. Consequently, the add-on effectively combines thermodynamics and geodynamic modeling. The carefully documented examples could be easily adapted for a broad range of applications. THERIAK_D is free, and the program, user manual, and source codes may be downloaded from http://www.min.unikiel.de/similar to ed/theriakd/.
Radiocarbon dating of lake sediments is often hampered by the presence of a lake reservoir effect (LRE, also 'dead carbon' or 'old carbon' effect) especially in dry and cold regions with a sparse plant cover in the catchment. The Tibetan Plateau became a hotspot of the palaeoenvironmental and climate research community in recent years and the assessment of present-day LREs is a crucial prerequisite for the establishment of reliable radiocarbon age depth relationships for lake sediment cores. This paper examines the spatial variability of LREs within individual lakes, through a discussion of new data for Lake Donggi Cona and a compilation of previously published data for five additional lakes where LRE data are available for different sites. Lake reservoir effects for Lake Donggi Cona on the northeastern Tibetan Plateau were determined for shells of aquatic snails collected alive close to the lake's shore. The largest determined LRE of 20,000 C-14 years is significantly larger than previously reported LREs from the central part of the lake, and larger than any previously published LRE for the Tibetan Plateau. Relatively low LREs in the central regions of lakes, higher LREs towards the margins, and high LREs in tributaries and spring waters are apparently a common pattern of Tibetan Plateau lakes. The differences in LREs within individual lakes or catchment areas are attributed to the more prolonged exchange of the lake water's dissolved inorganic carbon with the atmospheric CO2 in central lake regions on the one hand and the increasing influence of C-14 free or poor stream and groundwater due to the dissolution of carbonaceous basement rocks towards its margins. Generally higher LREs were recorded in the three tectonically active lake regions of the six examined catchments, and it is speculated that rising crustal CO2 further contributes to the LREs in these catchments. In addition to these observations and inferences, elevated C-14 levels of the atmosphere as a result of nuclear bomb testing are often ignored if LREs for modern materials are reported by convention relative to the atmospheric C-14 activity of the year 1950. LRE data reported in this way represent unrealistic minimum estimates. (C) 2013 Elsevier Ltd and INQUA.
We have undertaken a high resolution palaeoclimate reconstruction on radiocarbon dated palaeolake sediments from the Spiti valley, NW Himalaya. This site lies in the climatically sensitive winter westerlies and Indian Summer Monsoon (ISM) transitional regime and provides an opportunity to reconstruct the precipitation seasonality, and extreme precipitation events that are characterised by intensified erosion. The lake sediments reveal distinct lithofacies that provide evidence of changes in depositional environment and climate during early to mid Holocene (8.7-6.1 cal ka BP). We have identified three stages during the period of lake's existence: the Stage I (8.7-7.6 cal ka BP) is marked by lake establishment; Stage II (similar to 7.6-6.8 cal ka BP) by sustained cooler periods and weakened summer monsoon, and Stage III (similar to 6.8-6.1 cal ka BP) by a shift from colder to warmer climate with stronger ISM. We have identified several short term cooler periods at ca. 8.7, 8.5, 8.3 and 7.2-6.9 cal ka BP. Based on an overview of regional climate records we show that there is an abrupt switch in precipitation seasonality ca. 6.8 cal ka BP that is followed by the onset of the intensified monsoon in the NW Himalaya. (C) 2013 Elsevier Ltd and INQUA. All rights reserved.
Ostracod distribution and habitat relationships in the Kunlun Mountains, northern Tibetan Plateau
(2013)
Surface sediment samples were collected from the lakes Heihai, Kusai, Haiding Nuur and Yan Hu, and from streams and ponds in the Kunlun Mountains at the northern margin of the Tibetan Plateau to investigate the sub-fossil ostracod (micro-crustacean) fauna of the region. Among 65 collected samples, 46 ostracod shell-rich samples were used to study the relationship between the ostracod distribution and specific conductivity (SC) of the water, which ranged from 0.6 to 53.0 mS cm(-1). A total of eleven ostracod species was identified from this region, with about half of the species restricted to the Tibetan Plateau and its adjacent mountain areas, and the other half representing Holarctic taxa. Tonnacypris cf. estonica and Tonnacypris tonnensis are reported from the Tibetan Plateau for the first time. Leucocythere sp. is the dominant species and Ilyocypris cf. bradyi is also relatively abundant. The other seven species were recorded with limited abundances apparently due to lower SC tolerances. Leucocythere sp. was recorded over the full SC range from 0.6 to 53 mS cm(-1). Eucypris mareotica is a typical brackish and saline water species, which was found at sample sites with high SC (2.8-53.0 mS cm(-1)). In contrast, Leucocythere dorsotuberosa, Candona candida and Eucypris afghanistanensis prefer freshwater to slightly oli-gohaline waters with SC < 1.8 mS cm(-1). The SC optimum and tolerance range for each species were determined and compared to earlier reported data from other regions of Central Asia. The results indicate that species assemblage data from fossil ostracod shells have a large potential to provide information on past SC levels and more general climate-determined moisture conditions. (C) 2013 Elsevier Ltd and INQUA. All rights reserved.
Retention and transformation of nutrients within a river catchment are important mechanisms influencing water quality measured at the watershed outlet. Nutrient storage and reduction can occur in soils as well as in the river and should be considered in water quality modelling. Consideration is possible using various methods at several points during modelling cascade. The study compares the effects of five different equation sets implemented into the Soil and Water Integrated Model (SWIM), one describing terrestrial and four in-stream retention with a rising complexity (including algal growth and death at the highest complexity level). The influences of the different methods alone and in combinations on water quality model outputs (NO3-N, NH4-N, PO4-P) were analyzed for the outlet of the large-scale Saale basin in Germany. Experiments revealed that nutrient forms coming primarily from diffuse sources are mostly influenced by retention processes in the soils of the catchment, and river processes are less important. Nutrients introduced to the river mainly by point sources are more subject to retention by in-stream processes, but both nutrient retention and transformation processes in soils and rivers have to be included. Although the best overall results could be achieved at the highest complexity level, the calibration efforts for this case are extremely high, and only minor improvements of overall model performance with the highest complexity were detected. Therefore, it could be reasoned that for some research questions also less complex model approaches would be sufficient, which could help to reduce unnecessary complexity and diminish high uncertainty in water quality modelling at the catchment scale. (C) 2013 Elsevier B.V. All rights reserved.
Any understanding of sediment routing from mountain belts to their forelands and offshore sinks remains incomplete without estimates of intermediate storage that decisively buffers sediment yields from erosion rates, attenuates water and sediment fluxes, and protects underlying bedrock from incision. We quantify for the first time the sediment stored in > 38000 mainly postglacial Himalayan valley fills, based on an empirical volume-area scaling of valley-fill outlines automatically extracted from digital topographic data. The estimated total volume of 690(+452/-242) km(3) is mostly contained in few large valley fills > 1 km(3), while catastrophic mass wasting adds another 177(31) km(3). Sediment storage volumes are highly disparate along the strike of the orogen. Much of the Himalaya's stock of sediment is sequestered in glacially scoured valleys that provide accommodation space for similar to 44% of the total volume upstream of the rapidly exhuming and incising syntaxes. Conversely, the step-like long-wave topography of the central Himalayas limits glacier extent, and thus any significant glacier-derived storage of sediment away from tectonic basins. We show that exclusive removal of Himalayan valley fills could nourish contemporary sediment flux from the Indus and Brahmaputra basins for > 1 kyr, though individual fills may attain residence times of > 100 kyr. These millennial lag times in the Himalayan sediment routing system may sufficiently buffer signals of short-term seismic as well as climatic disturbances, thus complicating simple correlation and interpretation of sedimentary archives from the Himalayan orogen, its foreland, and its submarine fan systems. (C) 2013 Elsevier B.V. All rights reserved.
Background: Short lived, iteroparous animals in seasonal environments experience variable social and environmental conditions over their lifetime. Animals can be divided into those with a "young-of-the-year" life history (YY, reproducing and dying in the summer of birth) and an "overwinter" life history (OW, overwintering in a subadult state before reproducing next spring).
We investigated how behavioural patterns across the population were affected by season and sex, and whether variation in behaviour reflects the variation in life history patterns of each season. Applications of pace-of-life (POL) theory would suggest that long-lived OW animals are shyer in order to increase survival, and YY are bolder in order to increase reproduction. Therefore, we expected that in winter and spring samples, when only OW can be sampled, the animals should be shyer than in summer and autumn, when both OW and YY animals can be sampled. We studied common vole (Microtus arvalis) populations, which express typical, intra-annual density fluctuation. We captured a total of 492 voles at different months over 3 years and examined boldness and activity level with two standardised behavioural experiments.
Results: Behavioural variables of the two tests were correlated with each other. Boldness, measured as short latencies in both tests, was extremely high in spring compared to other seasons. Activity level was highest in spring and summer, and higher in males than in females.
Conclusion: Being bold in laboratory tests may translate into higher risk-taking in nature by being more mobile while seeking out partners or valuable territories. Possible explanations include asset-protection, with OW animals being rather old with low residual reproductive value in spring. Therefore, OW may take higher risks during this season. Offspring born in spring encounter a lower population density and may have higher reproductive value than offspring of later cohorts. A constant connection between life history and animal personality, as suggested by the POL theory, however, was not found. Nevertheless, correlations of traits suggest the existence of animal personalities. In conclusion, complex patterns of population dynamics, seasonal variation in life histories, and variability of behaviour due to asset-protection may cause complex seasonal behavioural dynamics in a population.
Annually laminated (varved) lake sediments with intercalated detrital layers resulting from sedimentary input by runoff events are ideal archives to establish precisely dated records of past extreme runoff events. In this study, the mid- to late Holocene varved sediments of Lake Mondsee (Upper Austria) were analysed by combining sedimentological, geophysical and geochemical methods. This approach allows to distinguish two types of detrital layers related to different types of extreme runoff events (floods and debris flows) and to detect changes in flood activity during the last 7100 years. In total, 271 flood and 47 debris flow layers, deposited during spring and summer, were identified, which cluster in 18 main flood episodes (FE 1-18) with durations of 30-50 years each. These main flood periods occurred during the Neolithic (7100-7050 vyr BP and 6470-4450 vyr BP), the late Bronze Age and the early Iron Age (3300-3250 and 2800-2750 vyr BP), the late Iron Age (2050-2000 vyr BP), throughout the Dark Ages Cold Period (1500-1200 vyr BP), and at the end of the Medieval Warm Period and the Little Ice Age (810-430 vyr BP).
Summer flood episodes in Lake Mondsee are generally more abundant during the last 1500 years, often coinciding with major advances of Alpine glaciers. Prior to 1500 vyr BP, spring/summer floods and debris flows are generally less frequent, indicating a lower number of intense rainfall events that triggered erosion. In comparison with the increase of late Holocene flood activity in western and northwestern (NW) Europe, commencing already as early as 2800 yr BP, the hydro-meteorological shift in the Lake Mondsee region occurred much later. These time lags in the onset of increased hydrological activity might be either due to regional differences in atmospheric circulation pattern or to the sensitivity of the individual flood archives. The Lake Mondsee sediments represent the first precisely dated and several millennia long summer flood record for the northeastern (NE) Alps, a key region at the climatic boundary of Atlantic, Mediterranean and East European air masses, aiding a better understanding of regional and seasonal peculiarities of flood occurrence under changing climate conditions. (C) 2013 Elsevier Ltd. All rights reserved.
The Armutlu peninsula, located in the eastern Marmara Sea, coincides with the western end of the rupture of the 17 August 1999, Izmit M-W 7.6 earthquake which is the penultimate event of an apparently westward migrating series of strong and disastrous earthquakes along the NAFZ during the past century. We present new seismotectonic data of this key region in order to evaluate previous seismotectonic models and their implications for seismic hazard assessment in the eastern Marmara Sea. Long term kinematics were investigated by performing paleo strain reconstruction from geological field investigations by morphotectonic and kinematic analysis of exposed brittle faults. Short term kinematics were investigated by inverting for the moment tensor of 13 small to moderate recent earthquakes using surface wave amplitude spectra. Our results confirm previous models interpreting the eastern Marmara Sea Region as an active transtensional pull-apart environment associated with significant NNE-SSW extension and vertical displacement. At the northern peninsula, long term deformation pattern did not change significantly since Pliocene times contradicting regional tectonic models which postulate a newly formed single dextral strike slip fault in the Marmara Sea Region. This area is interpreted as a horsetail splay fault structure associated with a major normal fault segment that we call the Waterfall Fault. Apart from the Waterfall Fault, the stress strain relation appears complex associated with a complicated internal fault geometry, strain partitioning, and reactivation of pre-existing plane structures. At the southern peninsula, recent deformation indicates active pull-apart tectonics constituted by NE-SW trending dextral strike slip faults. Earthquakes generated by stress release along large rupture zones seem to be less probable at the northern, but more probable at the southern peninsula. Additionally, regional seismicity appears predominantly driven by plate boundary stresses as transtensional faulting is consistent with the southwest directed far field deformation of the Anatolian plate. (C) 2013 Elsevier B.V. All rights reserved.
The geothermal potential in Tarutung is controlled by both the Sumatra Fault system and young arc volcanism. In this study we use the spatial distribution of seismic attenuation, calculated from local earthquake recordings, to image the 3-D seismic attenuation of the area and relate it with the temperature anomalies and the fluid distribution of the subsurface. A temporary seismic network of 42 stations was deployed around Tarutung and Sarulla (south of Tarutung) for a period of 10 months starting in 2011 May. Within this period, the network recorded 2586 local events. A high-quality subset of 229 events recorded by at least 10 stations was used for the attenuation inversion (tomography). Path-average attenuation (t(p)*) was calculated by using a spectral inversion method. The spread function, the contour lines of the model resolution matrix and the recovery test results show that our 3-D attenuation model (Q(p)) has good resolution around the Tarutung Basin and along the Sarulla graben. High attenuation (low Q(p)) related to the geothermal system is found in the northeast of the Tarutung Basin suggesting fluid pathways from below the Sumatra Fault. The upper part of the studied geothermal system in the Tarutung district seems to be mainly controlled by the fault structure rather than by magmatic activities. In the southwest of the Tarutung Basin, the high attenuation zone is associated with the Martimbang volcano. In the Sarulla region, a low-Q(p) anomaly is found along the graben within the vicinity of the Hopong caldera.
TURBO2 - a MATLAB simulation to study the effects of bioturbation on paleoceanographic time series
(2013)
Bioturbation (or benthic mixing) causes significant distortions in marine stable isotope signals and other palaeoceanographic records. Although the influence of bioturbation on these records is well known it has rarely been dealt systematically. The MATLAB program called TURBO2 can be used to simulate the effect of bioturbation on individual sediment particles. It can therefore be used to model the distortion of all physical, chemical, and biological signals in deep-sea sediments, such as Mg/Ca ratios and UK37-based sea-surface temperature (SST) variations. In particular, it can be used to study the distortions in paleoceanographic records that are based on individual sediment particles, such as SST records based on foraminifera assemblages. Furthermore. TURBO2 provides a tool to study the effect of benthic mixing of isotope signals such as C-14, delta O-18, and delta C-13, measured in a stratigraphic carrier such as foraminifera shells.
The Late Permian Zechstein Group in northeastern Germany is characterized by shelf and slope carbonates that rimmed a basin extending from eastern England through the Netherlands and Germany to Poland. Conventional reservoirs are found in grainstones rimming islands created by pre-existing paleohighs and platform-rimming shoals that compose steep margins in the north and ramp deposits in the southern part. The slope and basin deposits are characterized by debris flows and organic-rich mudstones. Lagoonal and basinal evaporites formed the seal for these carbonate and underlying sandstone reservoirs. The objective of this investigation is to evaluate potential unconventional reservoirs in organic-rich, fine-grained and/or tight mudrocks in slope and basin as well as platform carbonates occurring in this stratigraphic interval. Therefore, a comprehensive study was conducted that included sedimentology, sequence stratigraphy, petrography, and geochemistry. Sequence stratigraphic correlations from shelf to basin are crucial in establishing a framework that allows correlation of potential productive facies in fine-grained, organic-rich basinal siliceous and calcareous mudstones or interfingering tight carbonates and siltstones, ranging from the lagoon, to slope to basin, which might be candidates for forming an unconventional reservoir. Most organic-rich shales worldwide are associated with eustatic transgressions. The basal Zechstein cycles, Z1 and Z2, contain organic-rich siliceous and calcareous mudstones and carbonates that form major transgressive deposits in the basin. Maturities range from over-mature (gas) in the basin to oil-generation on the slope with variable TOC contents. This sequence stratigraphic and sedimentologic evaluation of the transgressive facies in the Z1 and Z2 assesses the potential for shale-gas/oil and hybrid unconventional plays. Potential unconventional reservoirs might be explored in laminated organic-rich mudstones within the oil window along the northern and southern slopes of the basin. Although the Zechstein Z1 and Z2 cycles might have limited shale-gas potential because of low thickness and deep burial depth to be economic at this point, unconventional reservoir opportunities that include hybrid and shale-oil potential are possible in the study area.
Based on a numerical model of the Northeast German Basin (NEGB), we investigate the sensitivity of the calculated thermal field as resulting from heat conduction, forced and free convection in response to consecutive horizontal and vertical mesh refinements. Our results suggest that computational findings are more sensitive to consecutive horizontal mesh refinements than to changes in the vertical resolution. In addition, the degree of mesh sensitivity depends strongly on the type of the process being investigated, whether heat conduction, forced convection or free thermal convection represents the active heat driver. In this regard, heat conduction exhibits to be relative robust to imposed changes in the spatial discretization. A systematic mesh sensitivity is observed in areas where forced convection promotes an effective role in shorten the background conductive thermal field. In contrast, free thermal convection is to be regarded as the most sensitive heat transport process as demonstrated by non-systematic changes in the temperature field with respect to imposed changes in the model resolution.
The deep thermal field in sedimentary basins can be affected by convection, conduction or both resulting from the structural inventory, physical properties of geological layers and physical processes taking place therein. For geothermal energy extraction, the controlling factors of the deep thermal field need to be understood to delineate favorable drill sites and exploitation compartments. We use geologically based 3-D finite element simulations to figure out the geologic controls on the thermal field of the geothermal research site Gro Schonebeck located in the E part of the North German Basin. Its target reservoir consists of Permian Rotliegend clastics that compose the lower part of a succession of Late Carboniferous to Cenozoic sediments, subdivided into several aquifers and aquicludes. The sedimentary succession includes a layer of mobilized Upper Permian Zechstein salt which plays a special role for the thermal field due to its high thermal conductivity. Furthermore, the salt is impermeable and due to its rheology decouples the fault systems in the suprasalt units from subsalt layers. Conductive and coupled fluid and heat transport simulations are carried out to assess the relative impact of different heat transfer mechanisms on the temperature distribution. The measured temperatures in 7 wells are used for model validation and show a better fit with models considering fluid and heat transport than with a purely conductive model. Our results suggest that advective and convective heat transport are important heat transfer processes in the suprasalt sediments. In contrast, thermal conduction mainly controls the subsalt layers. With a third simulation, we investigate the influence of a major permeable and of three impermeable faults dissecting the subsalt target reservoir and compare the results to the coupled model where no faults are integrated. The permeable fault may have a local, strong impact on the thermal, pressure and velocity fields whereas the impermeable faults only cause deviations of the pressure field.
Fluid flow in low-permeable carbonate rocks depends on the density of fractures, their interconnectivity and on the formation of fault damage zones. The present-day stress field influences the aperture hence the transmissivity of fractures whereas paleostress fields are responsible for the formation of faults and fractures. In low-permeable reservoir rocks, fault zones belong to the major targets. Before drilling, an estimate for reservoir productivity of wells drilled into the damage zone of faults is therefore required. Due to limitations in available data, a characterization of such reservoirs usually relies on the use of numerical techniques. The requirements of these mathematical models encompass a full integration of the actual fault geometry, comprising the dimension of the fault damage zone and of the fault core, and the individual population with properties of fault zones in the hanging and foot wall and the host rock. The paper presents both the technical approach to develop such a model and the property definition of heterogeneous fault zones and host rock with respect to the current stress field. The case study describes a deep geothermal reservoir in the western central Molasse Basin in southern Bavaria, Germany. Results from numerical simulations indicate that the well productivity can be enhanced along compressional fault zones if the interconnectivity of fractures is lateral caused by crossing synthetic and antithetic fractures. The model allows a deeper understanding of production tests and reservoir properties of faulted rocks.
With this paper, we assess the present-day conductive thermal field of the Glueckstadt Graben in NW Germany that is characterized by large salt walls and diapirs structuring the graben fill. We use a finite element method to calculate the 3D steady-state conductive thermal field based on a lithosphere-scale 3D structural model that resolves the first-order structural characteristics of the graben and its underlying lithosphere. Model predictions are validated against measured temperatures in six deep wells. Our investigations show that the interaction of thickness distributions and thermal rock properties of the different geological layers is of major importance for the distribution of temperatures in the deep subsurface of the Glueckstadt Graben. However, the local temperatures may result from the superposed effects of different controlling factors. Especially, the upper sedimentary part of the model exhibits huge lateral temperature variations, which correlate spatially with the shape of the thermally highly conductive Permian salt layer. Variations in thickness and geometry of the salt cause two major effects, which provoke considerable lateral temperature variations for a given depth. (1) The "chimney effect" causes more efficient heat transport within salt diapirs. As a consequence positive thermal anomalies develop in the upper part and above salt structures, where the latter are covered by much less conductive sediments. In contrast, negative thermal anomalies are noticeable underneath salt structures. (2) The "thermal blanketing effect" is caused by thermally low conductive sediments that provoke the local storage of heat where these insulating sediments are present. The latter effect leads to both local and regional thermal anomalies. Locally, this translates to higher temperatures where salt margin synclines are filled with thick insulating clastic sediments. For the regional anomalies the cumulative insulating effects of the entire sediment fill results in a long-wavelength variation of temperatures in response to heat refraction effects caused by the contrast between insulating sediments and highly conductive crystalline crust. Finally, the longest wavelength of temperature variations is caused by the depth position of the isothermal lithosphere-asthenosphere boundary defining the regional variations of the overall geothermal gradient. We find that a conductive thermal model predicts observed temperatures reasonably well for five of the six available wells, whereas the steady-state conductive approach appears not to be valid for the sixth well.
The last known eruption at Cerro Machin Volcano (CMV) in the Central Cordillera of Colombia occurred 900 years BP and ended with the formation of a dacitic lava dome. The dome rocks contain both normally and reversely zoned plagioclase (An(24-54)), unzoned and reversely zoned amphiboles of dominantly tschermakite and pargasite/magnesio-hastingsite composition and olivine xenocrysts (Fo = 85-88) with amphibole/clinopyroxene overgrowth, all suggesting interaction with mafic magma at depth. Plagioclase additionally exhibits complex oscillatory zoning patterns reflecting repeated replenishment, fractionation and changes in intrinsic conditions in the magma reservoir. Unzoned amphiboles and cores of the reversely zoned amphiboles give identical crystallization conditions of 910 +/- 30 degrees C and 360 +/- 70 MPa, corresponding to a depth of about 13 +/- 2 km, at moderately oxidized conditions (f(O2) = +0.5 +/- 0.2 Delta NNO). The water content in the melt, calculated based on amphibole chemistry, is 7.1 +/- 0.4 wt.%. Rims of the reversely zoned amphiboles are relatively enriched in MgO and yield higher crystallization temperatures (T = 970 +/- 25 degrees C), slightly lower melt H2O contents (6.1 +/- 0.7 wt.%) and overlapping pressures (410 +/- 100 MPa). We suggest that these rims crystallized following an influx of mafic melt into a resident magma reservoir at mid-crustal depths, further supported by the occurrence of xenocrystic olivine. Crystallization of biotite, albite-rich plagioclase and quartz occurred at comparatively low temperatures (probably <800 degrees C) during early stages of ascent or storage at shallower levels. Based on amphibole mineral chemistry, the felsic resident melt had a rhyolitic composition (71 +/- 2 wt.% SiO2), whereas the hybrid magma, from which the amphibole rims crystallized, was dacitic (64 +/- 3 wt.% SiO2). The bulk rock chemistry of the CMV lava dome dacites is homogenous. They have elevated (La/Nb)(N) ratios of 3.8-4.5, typical for convergent margin magmas, and display several geochemical characteristics, of adakites. Both Sr and Nd isotope compositions (Sr-87/Sr-86 similar to 0.70497, Nd-143/Nd-144 similar to 0.51267) are among the most radiogenic observed for the Northern Volcanic Zone of the Andes. They are distinct from oceanic crust that has been subducted in the region, pointing to a continental crustal control on the isotope composition and hence the adakitic signature, possibly in a crustal "hot zone".
Emerged marine terraces and paleoshorelines along plate margins are prominent geomorphic markers that can be used to quantify the rates and patterns of crustal deformation. The northern margin of the Central Anatolian Plateau has been interpreted as an actively deforming orogenic wedge between the North Anatolian Fault and the Black Sea. Here we use uplifted marine terraces across principal faults on the Sinop Peninsula at the central northern side of the Pontide orogenic wedge to unravel patterns of Quaternary faulting and orogenic wedge behavior. We leveled the present-day elevations of paleoshorelines and dated marine terrace deposits using optically stimulated luminescence (OSL) to determine coastal uplift. The elevations of the paleoshorelines vary between 4 +/- 0.2 and 67 +/- 1.4 m above sea level and OSL ages suggest terrace formation episodes during interglacial periods at ca 125, 190, 400 and 570 ka, corresponding to marine isotopic stages (MIS) 5e, 7a, 11 and 15. Mean apparent vertical displacement rates (without eustatic correction) deduced from these terraces range between 0.02 and 0.18 mm/a, with intermittent faster rates of up to 0.26 mm/a. We obtained higher rates at the eastern and southern parts of the peninsula, toward the hinterland, indicating non-uniform uplift across the different morphotectonic segments of the peninsula. Our data are consistent with active on- and offshore faulting across the Sinop Peninsula. When integrated with regional tectonic observations, the faulting pattern reflects shortening distributed over a broad region of the northern margin of the Central Anatolian Plateau during the Quaternary.
The sidi Mohamed peridotites (Edough Massif, NE Algeria) - evidence for an upper mantle origin
(2013)
The Hercynian Edough massif is the easternmost crystalline massif of the Algerian coast. It consists of two tectonically superposed units composed of micaschists, gneisses, and peridotite. This study concentrates on the small and isolated Sidi Mohamed peridotite outcrop area (0.03 km(2)). The Sidi Mohamed peridotite is composed mainly of harzburgites (Mg-rich olivine and orthopyroxene as major minerals). The Ni (2051-2920 ppm), Cr (2368-5514 ppm) and MgO (similar to 28-35 wt.%) whole-rock composition and the relative depletion in Nb make these harzburgites comparable to depleted peridotites related to a subduction zone. We suggest that the Sidi Mohamed ultramafic body was derived directly from the upper mantle and tectonically incorporated into the gneiss units of the Edough metamorphic core complex in a subduction environment.
Quantifying lithogenic inputs to the North Pacific Ocean using the long-lived thorium isotopes
(2013)
Dissolved Th-232 is added to the ocean though the partial dissolution of lithogenic materials such as aerosol dust in the same way as other lithogenically sourced and more biologically important trace metals such as Fe. Oceanic Th-230, on the other hand, is sourced primarily from the highly predictable decay of dissolved U-234. The rate at which dissolved Th-232 is released by mineral dissolution can be constrained by a Th removal rate derived from Th-230:U-234 disequilibria, assuming steady-state. Calculated fluxes of dissolved Th-232 can in turn be used to estimate fluxes of other lithogenically sourced dissolved metals as well as the original lithogenic supplies, such as aerosol dust deposition, given the concentration and fractional solubility of Th (or other metals) in the lithogenic material. This method is applied to 7 water column profiles from the Innovative North Pacific Experiment (INOPEX) cruise of 2009 and 2 sites from the subtropical North Pacific. The structure of shallow depth profiles suggests rapid scavenging at the surface and at least partial regeneration of dissolved Th-232 at 100-200 m depth. This rapid cycling could involve colloidal Th generated during mineral dissolution, which may not be subject to the same removal rates as the more truly dissolved Th-230. An additional deep source of Th-232 was revealed in deep waters, most likely dissolution of seafloor sediments, and offers a constraint on dissolved trace element supply due to boundary exchange. (C) 2013 Elsevier B.V. All rights reserved.
During the African Humid Period (AHP, 15-5 ka BP) an almost 300 m deep paleo-lake covering 2200 km(2) developed in the Suguta Valley, in the Northern Kenya Rift Data from lacustrine sediments and paleo-shorelines indicate that a large paleo-lake already existed by 13.9 ka BP, and record rapid water level fluctuations of up to 100 m within periods of 100 years or less, and a final lowstand at the end of the AHP (5 ka BP). We used a hydro-balance model to assess the abruptness of these water level fluctuations and identify their causes. We observed that fluctuations within the AHP were caused by abrupt changes in precipitation of 26-40%. Despite the absence of continuous lacustrine data documenting the onset of the AHP in the Suguta Valley, we conclude from the hydro-balance model that only an abrupt onset to the AHP, prior to 14.8 ka BP, could have led to high water levels recorded. The modeling results suggest that the sudden increase in rainfall was the direct consequence of an eastward migration of the Congo Air Boundary (CAB), caused by an enhanced atmospheric pressure gradient between East Africa and southern Asia during a northern hemisphere (NH) summer insolation maximum. In contrast the end of the AHP must have been gradual despite an abrupt change in the source of precipitation when a decreasing pressure gradient between Asia and Africa prevented the CAB from reaching the study area. This abruptness was probably buffered by a contemporaneous change in precession producing an insolation maximum at the equator during September-October. This change would have meant that the only rain source was the Intertropical Convergence Zone (IT CZ), which would have carried a greater amount of moisture during the short rainy season thus slowing the fall in water level over a period of about 1000 years in association with the reduction in insolation. The results of this study provide an indication of the amount of time available for humans in north-eastern Africa to adapt in response to a changing climate, from hunting and gathering to farming and herding.
The geomorphic evolution of the Makran Range of SE-Iran and SW-Pakistan has been controlled by the prevailing SW-Asian monsoon and Mediterranean winter rainfall climate and the surface uplift processes resulting from the Arabia-Eurasia collision. The impact of climate on Quaternary fluvial and alluvial sequence formation and their regional correlation has been little investigated due to limited age control of these sequences. Using Be-10 cosmogenic nuclide exposure ages we established a Middle to Late Pleistocene terrace chronology. Our record tentatively indicates that terrace levels were abandoned towards the transition to or during warmer/pluvial periods (interglacials and/or interstadials) back to Marine Isotope Stage (MIS) 7, but abandoned ages show a large spread. It is hypothesized that pluvial phases correspond with times of enhanced SW-monsoons and a northward shift of the Intertropical Convergence Zone (ITCZ). Furthermore, orbital periodidties can be deduced on frequencies related to obliquity and precession cycles. Overall, caution has to be placed in sampling and interpreting alluvial deposits, which may have complex inheritance patterns and spatially and temporarily variable catchment erosion histories and terrace-channel dynamics.
Beside the dominant climate control on terrace formation, elevated channel steepness indices around major thrusts and numerous knickpoints indicate an additionally tectonic influence on terrace formation. Local incision rates (mean similar to 0.6-0.8 min.a(-1)) are variable in space and time but are similar to uplift rates obtained from coastal terraces and thus suggest a regional surface uplift. (C) 2013 Elsevier B.V. All rights reserved.