530 Physik
Refine
Year of publication
Document Type
- Article (893)
- Doctoral Thesis (364)
- Postprint (95)
- Other (49)
- Preprint (36)
- Habilitation Thesis (22)
- Review (12)
- Master's Thesis (10)
- Monograph/Edited Volume (4)
- Course Material (2)
Keywords
- diffusion (43)
- anomalous diffusion (32)
- gamma rays: general (20)
- synchronization (18)
- Synchronisation (16)
- organic solar cells (16)
- stochastic processes (14)
- ISM: supernova remnants (13)
- cosmic rays (13)
- data analysis (12)
Institute
- Institut für Physik und Astronomie (1489) (remove)
In the modern industrialized countries every year several hundred thousands of people die due to the sudden cardiac death. The individual risk for this sudden cardiac death cannot be defined precisely by common available, non-invasive diagnostic tools like Holter-monitoring, highly amplified ECG and traditional linear analysis of heart rate variability (HRV). Therefore, we apply some rather unconventional methods of nonlinear dynamics to analyse the HRV. Especially, some complexity measures that are basing on symbolic dynamics as well as a new measure, the renormalized entropy, detect some abnormalities in the HRV of several patients who have been classified in the low risk group by traditional methods. A combination of these complexity measures with the parameters in the frequency domain seems to be a promising way to get a more precise definition of the individual risk. These findings have to be validated by a representative number of patients.
We have used techniques of nonlinear dynamics to compare a special model for the reversals of the Earth's magnetic field with the observational data. Although this model is rather simple, there is no essential difference to the data by means of well-known characteristics, such as correlation function and probability distribution. Applying methods of symbolic dynamics we have found that the considered model is not able to describe the dynamical properties of the observed process. These significant differences are expressed by algorithmic complexity and Renyi information.
Two deterministic processes leading to roughening interfaces are considered. It is shown that the dynamics of linear perturbations of turbulent regimes in coupled map lattices is governed by a discrete version of the Kardar-Parisi-Zhang equation. The asymptotic scaling behavior of the perturbation field is investigated in the case of large lattices. Secondly, the dynamics of an order-disorder interface is modelled with a simple two-dimensional coupled map lattice, possesing a turbulent and a laminar state. It is demonstrated, that in some range of parameters the spreading of the turbulent state is accompanied by kinetic roughening of the interface.
Strange nonchaotic attractors typically appear in quasiperiodically driven nonlinear systems. Two methods of their characterization are proposed. The first one is based on the bifurcation analysis of the systems, resulting from periodic approximations of the quasiperiodic forcing. Secondly, we propose th characterize their strangeness by calculating a phase sensitivity exponent, that measures the sensitivity with respect to changes of the phase of the external force. It is shown, that phase sensitivity appears if there is a non-zero probability for positive local Lyapunov exponents to occur.
We have studied bifurcation phenomena for the incompressable Navier-Stokes equations in two space dimensions with periodic boundary conditions. Fourier representations of velocity and pressure have been used to transform the original partial differential equations into systems of ordinary differential equations (ODE), to which then numerical methods for the qualitative analysis of systems of ODE have been applied, supplemented by the simulative calculation of solutions for selected initial conditions. Invariant sets, notably steady states, have been traced for varying Reynolds number or strength of the imposed forcing, respectively. A complete bifurcation sequence leading to chaos is described in detail, including the calculation of the Lyapunov exponents that characterize the resulting chaotic branch in the bifurcation diagram.
Nowadays, colloidal rods can be synthesized in large amounts. The rods are typically cylindrically and their length ranges from several nanometers to a few micrometers. In solution, systems of colloidal rodlike molecules or aggregates can form liquid-crystalline phases with long-range orientational and spatial order. In the present work, we investigate structure formation and fractionation in systems of rodlike colloids with the help of Monte Carlo simulations in the NPT ensemble. Repulsive interactions can successfully be mimicked by the hard rod model, which has been studied extensively in the past. In many cases, attractive interactions like van der Waals or depletion forces cannot be neglected, however. In the first part of this work, the phase behavior of monodisperse attractive rods is characterized for different interaction strengths. Phase diagrams as a function of rod length and pressure are presented. Most systems of synthesized mesoscopic rods have a polydisperse length distribution as a consequence of the longitudinal growth process of the rods. For many technical and research applications, a rather small polydispersity is desired in order to have well defined material properties. The polydispersity can be reduced by a spatial demixing (fractionation) of long and short rods. Fractionation and structure formation is studied in a tridisperse and a polydisperse bulk suspension of rods. We observe that the resulting structures depend distinctly on the interaction strength. The fractionation in the system is strongly enhanced with increasing interaction strength. Suspensions are typically confined in a container. We also examine the influence of adjacent substrates in systems of tridisperse and polydisperse rod suspensions. Three different substrate types are studied in detail: a planar wall, a corrugated substrate, and a substrate with rectangular cavities. We analyze the fluid structure close to the substrate and substrate controlled fractionation. The spatial arrangement of long and short rods in front of the substrate depends sensitively on the substrate structure and the pressure. Rods with a predefined length are segregated at substrates with rectangular cavities.
In this thesis the interplay between hydrodynamic transport and specific adhesion is theoretically investigated. An important biological motivation for this work is the rolling adhesion of white blood cells experimentally investigated in flow chambers. There, specific adhesion is mediated by weak bonds between complementary molecular building blocks which are either located on the cell surface (receptors) or attached to the bottom plate of the flow chamber (ligands). The model system under consideration is a hard sphere covered with receptors moving above a planar ligand-bearing wall. The motion of the sphere is influenced by a simple shear flow, deterministic forces, and Brownian motion. An algorithm is given that allows to numerically simulate this motion as well as the formation and rupture of bonds between receptors and ligands. The presented algorithm spatially resolves receptors and ligands. This opens up the perspective to apply the results also to flow chamber experiments done with patterned substrates based on modern nanotechnological developments. In the first part the influence of flow rate, as well as of the number and geometry of receptors and ligands, on the probability for initial binding is studied. This is done by determining the mean time that elapses until the first encounter between a receptor and a ligand occurs. It turns out that besides the number of receptors, especially the height by which the receptors are elevated above the surface of the sphere plays an important role. These findings are in good agreement with observations of actual biological systems like white blood cells or malaria-infected red blood cells. Then, the influence of bonds which have formed between receptors and ligands, but easily rupture in response to force, on the motion of the sphere is studied. It is demonstrated that different states of motion-for example rolling-can be distinguished. The appearance of these states depending on important model parameters is then systematically investigated. Furthermore, it is shown by which bond property the ability of cells to stably roll in a large range of applied flow rates is increased. Finally, the model is applied to another biological process, the transport of spherical cargo particles by molecular motors. In analogy to the so far described systems molecular motors can be considered as bonds that are able to actively move. In this part of the thesis the mean distance the cargo particles are transported is determined.
The separation of natural and anthropogenically caused climatic changes is an important task of contemporary climate research. For this purpose, a detailed knowledge of the natural variability of the climate during warm stages is a necessary prerequisite. Beside model simulations and historical documents, this knowledge is mostly derived from analyses of so-called climatic proxy data like tree rings or sediment as well as ice cores. In order to be able to appropriately interpret such sources of palaeoclimatic information, suitable approaches of statistical modelling as well as methods of time series analysis are necessary, which are applicable to short, noisy, and non-stationary uni- and multivariate data sets. Correlations between different climatic proxy data within one or more climatological archives contain significant information about the climatic change on longer time scales. Based on an appropriate statistical decomposition of such multivariate time series, one may estimate dimensions in terms of the number of significant, linear independent components of the considered data set. In the presented work, a corresponding approach is introduced, critically discussed, and extended with respect to the analysis of palaeoclimatic time series. Temporal variations of the resulting measures allow to derive information about climatic changes. For an example of trace element abundances and grain-size distributions obtained near the Cape Roberts (Eastern Antarctica), it is shown that the variability of the dimensions of the investigated data sets clearly correlates with the Oligocene/Miocene transition about 24 million years before present as well as regional deglaciation events. Grain-size distributions in sediments give information about the predominance of different transportation as well as deposition mechanisms. Finite mixture models may be used to approximate the corresponding distribution functions appropriately. In order to give a complete description of the statistical uncertainty of the parameter estimates in such models, the concept of asymptotic uncertainty distributions is introduced. The relationship with the mutual component overlap as well as with the information missing due to grouping and truncation of the measured data is discussed for a particular geological example. An analysis of a sequence of grain-size distributions obtained in Lake Baikal reveals that there are certain problems accompanying the application of finite mixture models, which cause an extended climatological interpretation of the results to fail. As an appropriate alternative, a linear principal component analysis is used to decompose the data set into suitable fractions whose temporal variability correlates well with the variations of the average solar insolation on millenial to multi-millenial time scales. The abundance of coarse-grained material is obviously related to the annual snow cover, whereas a significant fraction of fine-grained sediments is likely transported from the Taklamakan desert via dust storms in the spring season.
Variationen der stratosphärischen Residualzirkulation und ihr Einfluss auf die Ozonverteilung
(2006)
Die Residualzirkulation entspricht der mittleren Massenzirkulation und beschreibt die im zonalen Mittel stattfindenden meridionalen Transportprozesse. Die Variationen der Residualzirkulation bestimmen gemeinsam mit dem anthropogen verursachten Ozonabbau die jährlichen Schwankungen der Ozongesamtsäule im arktischen Frühling. In der vorliegenden Arbeit wird die Geschwindigkeit des arktischen Astes der Residualzirkulation aus atmosphärischen Daten gewonnen. Zu diesem Zweck wird das diabatische Absinken im Polarwirbel mit Hilfe von Trajektorienrechnungen bestimmt. Die vertikalen Bewegungen der Luftpakete können mit vertikalen Windfeldern oder entsprechend einem neuen Ansatz mit diabatischen Heizraten angetrieben werden. Die Eingabedaten stammen aus dem 45 Jahre langen Reanalyse-Datensatz des "European Centre for Medium Range Weather Forecast" (ECMWF). Außerdem kann für die Jahre ab 1984 die operationelle ECMWF-Analyse verwendet werden. Die Qualität und Robustheit der Heizraten- und Trajektorienrechnungen werden durch Sensitivitätsstudien und Vergleiche mit anderen Modellen untermauert. Anschließend werden umfangreiche Trajektorienensemble statistisch ausgewertet, um ein detailliertes, zeit- und höhenaufgelöstes Bild des diabatischen Absinkens zu ermitteln. In diesem Zusammenhang werden zwei Methoden entwickelt, um das Absinken gemittelt im Polarwirbel oder als Funktion der äquivalenten Breite zu bestimmen. Es wird gezeigt, dass es notwendig ist den Lagrangeschen auf Trajektorienrechnungen basierenden Ansatz zu verfolgen, da die einfachen Eulerschen Mittel Abweichungen zu den Lagrangeschen Vertikalgeschwindigkeiten aufweisen. Das wirbelgemittelte Absinken wird für einzelne Winter mit dem beobachteten Absinken langlebiger Spurengase und anderen Modellstudien verglichen. Der Vergleich zeigt, dass das Absinken basierend auf den vertikalen Windfeldern der ECMWF-Datensätze den Nettoluftmassentransport durch die Residualzirkulation sehr stark überschätzt. Der neue Ansatz basierend auf den Heizraten ergibt hingegen realistische Ergebnisse und wird aus diesem Grund für alle Rechnungen verwendet. Es wird erstmalig eine Klimatologie des diabatischen Absinkens über einen fast fünf Jahrzehnte umfassenden Zeitraum erstellt. Die Klimatologie beinhaltet das vertikal und zeitlich aufgelöste diabatische Absinken gemittelt über den gesamten Polarwirbel und Informationen über die räumliche Struktur des vertikalen Absinkens. Die natürliche Jahr-zu-Jahr Variabilität des diabatischen Absinkens ist sehr stark ausgeprägt. Es wird gezeigt, dass zwischen der ECMWF-Zeitreihe des diabatischen Absinkens und der Zeitreihe aus einem unabhängig analysierten Temperaturdatensatz hohe Korrelationen bestehen. Erstmals wird der Einfluss von Transportprozessen auf die Ozongesamtsäule im arktischen Frühling direkt quantifiziert. Es wird gezeigt, dass die Jahr-zu-Jahr Variabilität der Ozongesamtsäule im arktischen Frühling zu gleichen Anteilen durch die Variabilität der dynamischen Komponente und durch die Variabilität der chemischen Komponente beeinflusst wird. Die gefundenen Variabilitäten von diabatischem Absinken und Ozoneintrag in hohen Breiten werden mit der vertikalen Ausbreitung planetarer Wellen aus der Troposphäre in die Stratosphäre in Beziehung gesetzt.
The primary objective of this work was to develop a laser source for fundamental investigations in the field of laser – materials interactions. In particular it is supposed to facilitate the study of the influence of the temporal energy distribution such as the interaction between adjacent pulses on ablation processes. Therefore, the aim was to design a laser with a highly flexible and easily controllable temporal energy distribution. The laser to meet these demands is an SBS-laser with optional active mode-locking. The nonlinear reflectivity of the SBS-mirror leads to a passive Q-switching and issues ns-pulse bursts with µs spacing. The pulse train parameters such as pulse duration, pulse spacing, pulse energy and number of pulses within a burst can be individually adjusted by tuning the pump parameters and the starting conditions for the laser. Another feature of the SBS-reflection is phase conjugation, which leads to an excellent beam quality thanks to the compensation of phase distortions. Transverse fundamental mode operation and a beam quality better than 1.4 times diffraction limited can be maintained for average output powers of up to 10 W. In addition to the dynamics on a ns-timescale described above, a defined splitting up of each ns-pulse into a train of ps-pulses can be achieved by additional active mode-locking. This twofold temporal focussing of the intensity leads to single pulse energies of up to 2 mJ at pulse durations of approximately 400 ps which corresponds to a pulse peak power of 5 MW. While the pulse duration is of the same order of magnitude as those of other passively Q-switched lasers with simultaneous mode-locking, the pulse energy and pulse peak power exceeds the values of these systems found in the literature by an order of magnitude. To the best of my knowledge the laser presented here is the first implementation of a self-starting mode-locked SBS-laser oscillator. In order to gain a better understanding and control of the transient output of the laser two complementary numerical models were developed. The first is based on laser rate equations which are solved for each laser mode individually while the mode-locking dynamics are calculated from the resultant transient spectrum. The rate equations consider the mean photon densities in the resonator, therefore the propagation of the light inside the resonator is not properly displayed. The second model, in contrast, introduces a spatial resolution of the resonator and hence the propagation inside the resonator can more accurately be considered. Consequently, a mismatch between the loss modulation frequency and the resonator round trip time can be conceived. The model calculates all dynamics in the time domain and therefore the spectral influences such as the Stokes-shift have to be neglected. Both models achieve an excellent reproduction of the ns-dynamics that are generated by the SBS-Q-switch. Separately, each model fails to reproduce all aspects of the ps-dynamics of the SBS-laser in detail. This can be attributed to the complexity of the numerous physical processes involved in this system. But thanks to their complementary nature they provide a very useful tool for investigating the various influences on the dynamics of the mode-locked SBS-laser individually. These aspects can eventually be recomposed to give a complete picture of the mechanisms which govern the output dynamics. Among the aspects under scrutiny were in particular the start resonator quality which determines the starting condition for the SBS-Q-switch, the modulation depth of the AOM and the phonon lifetime as well as the Brillouin-frequency of the SBS-medium. The numerical simulations and the experiments have opened several doors inviting further investigations and promising a potential for further improvement of the experimental results: The results of the simulations in combination with the experimental results which determined the starting conditions for the simulations leave no doubt that the bandwidth generation can primarily be attributed to the SBS-Stokes-shift during the buildup of the Q-switch pulse. For each resonator round trip, bandwidth is generated by shifting a part of the revolving light in frequency. The magnitude of the frequency shift corresponds to the Brillouin-frequency which is a constant of the SBS material and amounts in the case of SF6 to 240 MHz. The modulation of the AOM merely provides an exchange of population between spectrally adjacent modes and therefore diminishes a modulation in the spectrum. By use of a material with a Brillouin-frequency in the GHz range the bandwidth generation can be considerably accelerated thereby shortening the pulse duration. Also, it was demonstrated that yet another nonlinear effect of the SBS can be exploited: If the phonon lifetime is short compared to the resonator round trip time we obtain a modulation in the SBS-reflectivity that supports the modulation of the AOM. The application of an external optical feedback by a conventional mirror turns out to be an alternative to the AOM in synchronizing the longitudinal resonator modes. The interesting feature about this system is that it is ― although highly complex in the physical processes and the temporal output dynamics ― very simple and inexpensive from a technical point of view. No expensive modulators and no control electronics are necessary. Finally, the numerical models constitute a powerful tool for the investigation of emission dynamics of complex laser systems on arbitrary timescales and can also display the spectral evolution of the laser output. In particular it could be demonstrated that differences in the results of the complementary models vanish for systems of lesser complexity.