Refine
Year of publication
- 2005 (77) (remove)
Document Type
- Article (58)
- Doctoral Thesis (13)
- Postprint (4)
- Habilitation Thesis (1)
- Other (1)
Language
- English (77) (remove)
Keywords
- Selbstorganisation (3)
- Blockcopolymere (2)
- Funktionalisierung <Chemie> (2)
- colloids (2)
- polypeptide (2)
- self-assembly (2)
- 5'-neolignane (1)
- 8 (1)
- Adsorption (1)
- Amine (1)
Institute
- Institut für Chemie (77) (remove)
Photochemical and photophysical properties were investigated for poly(arylenevinylene)s containing a flexible biphenyl "hinge" unit by applying one-photon (OP) and two-photon (TP) excitation to explore excited-state properties. The poly(arylenevinylene)s were poly[(2,5-dihexyloxy-p-phenylenevinylene)-alt-(4,4'-dihexyloxy-3,3'-biph enylenevinylene)] (1), poly[(2,5-dihexyloxy-p-phenylenevinylene)-alt-(2,2'-dihexyloxy-3,3'-biph enylenevinylene)] (2), and poly[(2,5-dihexyloxy-p-phenylenevinylene)-alt-(2,2'-biphenylene-vinylene )] (3). Effective emission quantum yields and related photonic properties were evaluated on a realistic per-chromophore basis using effective conjugation lengths based on the Strickler-Berg relationship. intramolecular photocyclization was deduced to occur in the one case where the biphenyl molecular connectivity permitted the reaction, based on matrix- assisted loser desorption/ionization time-of-flight (MALDI-TOF), heteronuclear multiple-quantum coherence (HMQC)-NMR, and gel-permeation chromatography (GPC) results. The various photoprocesses could be induced by either OP or TP excitation, though the first excited singlet state is the photoactive state. The higher excitation energy 1 of the TP excited state favors indirect population of the S, state by electronic coupling between the TP and OP excited states [lambda(max)(TPE) (nm): 726; delta (GM)([9]): 1 = 229, 2 = 215, 3 = 109). Photochemical processes occurring from the lowest OP excited state (S-1) could therefore also be indirectly induced by TP excitation
Heterobimetallic 3d-4-complexes with bis(1;2-dithiooxalato)nickelate(II) as planar bridging block
(2005)
Planar bis(1,2-dithiooxalato)nickelates(II) react in aqueous solutions of lanthanide ions to form pentanuclear, heterobimetallic complexes of the general composition [{Ln(H2O)(n)}(2)- {Ni(dto)(2)}(3)] (.) xH(2)O (Ln = Y3+, La3+, Ce3+, Pr3+, Nd3+, Sm3+, Eu3+, Gd3+, Tb3+, Dy3+, Ho3+, Er3+, Tm3+, Yb3+, Lu3+; n = 4 or 5; x = 9-12). With [{Nd(H2O)(5)}(2){Ni(S2C2O2)(2)}(3)] (.) xH(2)O (x = 10-12) (1) and [{Er(H2O)(4)}(2){Ni(S2C2O2)(2)}(3)] (.) xH(2)O (x = 9- 10) (2) we were able to isolate two complexes of this series as single crystals, which were characterized by X-ray structure analysis. Depending on the individual ionic radii of the lanthanide ions, the compounds crystallize in two different crystal systems with the following unit cell parameters: 1, monoclinic in P2(1)/c with a = 11.3987(13), b = 11.4878(8), c = 20.823(2)angstrom , beta = 98.907(9)degrees and Z = 2; 2, triclinic in P (1) over bar with a = 10.5091(6), b = 11.0604(6), c = 11.2823(6) angstrom, alpha = 107.899(4)degrees, beta = 91.436(4)degrees, gamma = 112.918(4)degrees and Z = 1. The channels and cavities appearing in the packing of the molecules are occupied by uncoordinated water molecules. High magnetic moments up to 14.65 BM./f.u. have been observed at room temperature due to the combined moments of the individual lanthanide ions
Interpretation of conformational effects on 2-endo-norborneol by natural chemical shielding analysis
(2005)
This paper represents an extension of our work on the H-1 and C-13 NMR chemical shifts of norbornane and 2-endo- norborneol. NCS-NBO analysis was employed to probe contributions of bond orbitals and orbitals of lone pairs to nuclear shielding in conformers of the alcohol generated by rotation of the C-O bond. Variations in H-1 and C-13 chemical shifts with the dihedral angle are discussed in terms of Lewis and non-Lewis partitioning and their respective importance is evaluated. In addition to hyperconjugation of the lone pair in a p orbital of oxygen that was previously reported, a sizable participation of the lone pair which is in an sp orbital is also observed and their combined effect dominates the carbon chemical shifts of the C-1-C-2-OH and C-3-C-2-OH fragments. Both lone pairs on oxygen also contribute to localized, though-space effects on nuclei in the vicinity, these effects answering for the largest deviations in hydrogen chemical shifts on rotation around the C-O bond. On the other hand, for conformers in which nonbonded repulsions lead to distortions in the molecular framework, variations in chemical shifts may be attributed to angular effects
To determine whether Forster resonance energy transfer (FRET) measurements can provide quantitative distance information in single-molecule fluorescence experiments on polypeptides, we measured FRET efficiency distributions for donor and acceptor dyes attached to the ends of freely diffusing polyproline molecules of various lengths. The observed mean FRET efficiencies agree with those determined from ensemble lifetime measurements but differ considerably from the values expected from Forster theory, with polyproline treated as a rigid rod. At donor-acceptor distances much less than the Forster radius R-o, the observed efficiencies are lower than predicted, whereas at distances comparable to and greater than R-0, they are much higher. Two possible contributions to the former are incomplete orientational averaging during the donor lifetime and, because of the large size of the dyes, breakdown of the point-dipole approximation assumed in Forster theory. End-to-end distance distributions and correlation times obtained from Langevin molecular dynamics simulations suggest that the differences for the longer polyproline peptides can be explained by chain bending, which considerably shortens the donor-acceptor distances
In this paper we present time-dependent, quantum-dynamical simulations of photoinduced processes at solid surfaces involving nonadiabatic transitions of electrons to and from short-lived intermediate excited states. In particular, two-photon photoemission (2PPE) spectra of naked metal surfaces and free-standing metal films are considered. One major problem in both cases is the presence of electron-electron scattering, which is treated here in various ways. The first way is to adopt an open-system density matrix approach, in which a single electron is weakly coupled to a "bath" of other electrons. The second approach is based on a many-electron Schrodinger equation, which is solved with the help of a time-dependent configuration interactions singles (TD-CIS) method
General syntheses have been developed for meso-substituted porphyrins with one or two substituents in the 5,10- positions and no beta substituents. 5-Substituted porphyrins with only one meso substituent are easily prepared by an acid-catalyzed condensation of dipyrromethane, pyrrole-2-carbaldehyde. and an appropriate aldehyde using a "[2+1+1]" approach. Similarly, 5,10-disubstituted porphyrins are accessible by simple condensation of unsubstituted tripyrrane with pyrrole and various aldehydes using a "[3+1]" approach. The yields for these reactions are low to moderate and additional formation of either di- or mono-substituted porphyrins due to scrambling of the intermediates is observed. However, the reactions can be performed quite easily and the desired target compounds are easily removed due to large differences in solubility. A complementary and more selective synthesis involves the use of organolithium reagents for SNAr reactions. Reaction of in situ generated porphyrin (porphine) with 1.1-8 equivalents of RLi gave the monosubstituted porphyrins, while reaction with 3-6 equivalents of RLi gave the 5,10-disubstituted porphyrins in yields ranging from 43 to 90%. These hitherto almost inaccessible compounds complete the series of different homologues of A-, 5,15-A(2)-, 5,10-A(2)-, A(3)-, and A(4)-type porphyrin's and allow an investigation of the gradual influence of type, number, and regiochemical arrangement of substituents on the properties of meso-substituted porphyrins. They also present important starting materials for the synthesis of ABCD porphyrins and are potential synthons for supramolecular materials requiring specific substituent orientations
The geometric structure and bonding properties of medium-sized ArnH+ clusters (n = 2-35), in which a proton is wrapped up in a number of Ar atoms, are investigated by applying a diatomics-in-molecules (DIM) model with ab-initio input data generated by means of multi-reference configuration-interaction (MRCI) computations. For the smaller complexes, n = 2-7, cross-checking calculations employing the coupled-cluster approach (CCSD) with the same one-electron atomic basis set as for the input data calculations (aug-cc-pVTZ from Dunning), show good agreement thus justifying the extension of the DIM study to larger n. Local minima of the multi-dimensional potential-energy surfaces (PES) are determined by combining a Monte-Carlo sampling followed, for each generated point, by a steepest-descent optimization procedure. For the electronic ground state of the ArnH+ clusters, the global minimum (corresponding to the most stable structure of the cluster) as well as secondary minima are found and analyzed. The structural and energetic data obtained reveal the building-up regularities for the most stable structures and make it possible to formulate a simple increment scheme. The low-lying excited states are also calculated by the DIM approach; they all turn out to be globally repulsive
The search for new efficient sensitizers for photodynamic therapy (PDT) points to improve photophysical properties like absorption in the red region and singlet oxygen quantum yield as well as to control the localization of the sensitizer within the tumour cell. Depending on their physicochemical properties and their uptake mechanism, sensitizers can reach different intracellular concentrations and localize in different subcellular compartments. Moreover, the preferential localization of a sensitizer in target organelles, like mitochondria or lysosomes, could determine the cell death mechanism after PDT. This study aimed to investigate the influence of substitutions on dihydroxychlorins with regard to intracellular uptake, subcellular localization and cell death pathway. Moreover, the effect of a liposome-based delivery system was tested. The intracellular uptake was found to be strictly dependent on the sensitizer molecular structure and the means of its delivery. The most polar sensitizer in this study (compound 3) had, depending on incubation time, an intracellular concentration 2-8 times higher than the unsubstituted chlorin 1. All investigated photosensitizers localize predominantly in lysosomes but after longer incubation times weak fluorescence intensity was also detected in mitochondria and Golgi apparatus. The cell death pathway was found to be influenced by the sensitizer intracellular concentration and the applied light doses. In general, the increasing amphiphilicity of the sensitizer molecules is correlated with an increased sensitizer uptake and an increased rate of necrotic cells after irradiation. (C) 2004 Elsevier B.V. All rights reserved
This paper presents some results concerning the size-controlled hydroxyapatite nanoparticles obtained in aqueous media in a biopolymer matrix from soluble precursors salts. Taking the inspiration from nature, where composite materials made of a polymer matrix and inorganic fillers are often found, e.g. bone, shell of crustaceans, shell of eggs, etc., the feasibility on making composite materials containing chitosan and nanosized hydroxyapatite was investigated. A stepwise co-precipitation approach was used to obtain different types of composites by means of different ratio between components. The synthesis of hydroxyapatite was carried out in the chitosan matrix from calcium chloride and sodium dihydrogenphosphate in alkaline solutions at moderate pH of 10-11 for 24 h. Our research is focused on studying and understanding the structure of this class of composites, aiming at the development of novel materials, controlled at the nanolevel scale. The X-ray diffraction technique was employed in order to study the kinetic of hydroxyapatite formation in the chitosan matrix as well as to determine the HAp crystallite sizes in the composite samples. The hydroxyapatite synthesized using this route was found to be nano-sized (15-50nm). Moreover, applying an original approach to analyze the (002) XRD diffraction peak profile of hydroxyapatite by using a sum of two Gauss functions, the bimodal distribution of nanosized hydroxyapatite within the chitosan matrix was revealed. Two types of size distribution domains such as cluster-like (between 200 and 400 nm), which are the habitat of "small" hydroxyapatite nanocrystallites and scattered-like, which are the habitat of "large" hydroxyapatite nanocrystallites was probed by TEM and CSLM. The structural features of composites suggest that self-assembly processes might be involved. The composites contain nanosized hydroxyapatite with structural features close to those of biological apatites that make them attractive for bone tissue engineering applications. (c) 2005 Elsevier Ltd. All rights reserved
This paper is focused on the synthesis and characterization of hydrophobically modified polyelectrolytes and their use as reducing as well as stabilizing agents for the formation of gold nanoparticles. Commercially available poly(acrylic acid) has been hydrophobically modified with various degrees of grafting of butylamine introduced randomly along the chain. Different analytical methods are performed, i.e., IR and H-1-NMR spectroscopy in combination with elemental analysis to determine the degree of grafting. The modified polymers can successfully be used for the controlled single-step synthesis and stabilization of gold nanoparticles. The process of nanoparticle formation is investigated by means of UV-vis spectroscopy. The size and shape of the particles obtained in the presence of unmodified or modified polyelectrolytes are characterized by dynamic light scattering, zeta potential measurements and transmission electron microscopy. The polyelectrolytes were involved in the crystallization process of the nanoparticles, and in the presence of hydrophobic microdomains at the particle surface, a better stabilization at higher temperature can be observed
Equilibria between the Z (tau(1) = 0 degrees) and E (tau(1) = 180 degrees) conformers of p-substituted phenyl acetates 4 and trifluoroacetates 5 (X = OMe, Me, H, Cl, CN, NO2) were studied by ab initio calculations at the HF/6-31G* and MP2/6-31G* levels of theory. The preference for the Z conformer, Delta E(HF), was calculated to be 5.36 kcal mol(-1) and 7.50 kcal mot(-1) for phenyl acetate and phenyl trifluoroacetate (i.e., with X = H), respectively. The increasing electron-withdrawing ability of the phenyl substituent X increases the preference of the Z conformer. An excellent correlation with a negative slope was observed for both series between Delta E of the E-Z equilibrium and the Hammett sigma constant. By using an appropriate isodesmic reaction, it was shown that electron-withdrawing substituents decrease the stability of both conformers, but the effect is higher with the E conformer. Electron-withdrawing phenyl substituents decrease the delocalization of the lone pair of the ether oxygen to the C=O antibonding orbital (n(O) -> pi*(C=O)) in both the E and Z forms and in both series studied; this effect is higher in the E conformer than in the Z conformer. The n(O) -> pi*(C=O) electron donation has a minimum value with tau(1) = 90 degrees and a maximum value with tau(1) = 90 degrees (the Z conformer), the value with tau(1) = 180 degrees (the E conformer) being between these two values, obviously due to steric hindrance. The effects of the phenyl substituents on the reactivity of the esters studied are discussed in terms of molecular orbital interactions. ED/EW substituents adjust the availability of the pi*(C=O) antibonding orbital to interact with the lone pair orbital of the attacking nucleophile and therefore affect the reactivity: EW substituents increase and ED substituents decrease it. Excellent correlations were observed between the rate coefficients of nucleophilic acyl substitutions and pi*(C=O) occupancies of the ester series 4 and
We apply the multiconfiguration time-dependent Hartree-Fock method to electronic structure calculations and show that quantum chemical information can be obtained with this explicitly time-dependent approach. Different equations of motion are discussed, as well as the numerical cost. The two-electron integrals are calculated using a natural potential expansion, of which we describe the convergence behavior in detail
In this article we report about a successful application of modern machine learning technology, namely Support Vector Machines, to the problem of assessing the 'drug-likeness' of a chemical from a given set of descriptors of the Substance. We were able to drastically improve the recent result by Byvatov et al. (2003) on this task and achieved an error rate of about 7% on unseen compounds using Support Vector Machines. We see a very high potential of such machine learning techniques for a variety of computational chemistry problems that occur in the drug discovery and drug design process
A series of nonionic, anionic, and cationic water-soluble monomers bearing the (meth)acrylate, (meth)acrylamide, or styrene moiety were polymerized in water by free-radical polymerization via reversible addition- fragmentation chain transfer (RAFT). Several new water-soluble RAFT agents based on dithiobenzoate were employed that are water soluble independently of the pH. One of them bears a fluorophore, enabling unsymmetrical double end-group labeling as well as the preparation of fluorescent-labeled polymers. The temperature-dependent stability of the new RAFT agents against hydrolysis was studied. Controlled polymerization in aqueous solution was possible with styrenic, acrylic, and methacrylic monomers; molar masses increase with conversion, and polydispersities are relatively low. But RAFT polymerization failed for an anionic itaconate. Whereas polymerizations of methacrylamides were slow at temperatures below 60 degrees C, such conditions proved favorable for the RAFT polymerization of acrylates and methacrylates, to minimize hydrolysis of the dithioester end-group functionality, and to improve the preparation of block copolymers
A series of RAFT agents was synthesised, and used to prepare various ionic. non-ionic and zwitterionic water- soluble polymers, in organic as well as in aqueous media. The RAFT process proved to be a powerful method to prepare functional polymers of complex structure. such as amphiphilic diblock and triblock copolymers. This includes polymers containing one or even two stimuli-sensitive hydrophilic blocks. Switching the hydrophilic character of a single or of several blocks by changing the PH, the temperature or the salt content demonstrated the variability of the molecular designs suited for stimuli-sensitive polymeric amphiphiles, and exemplified the concept of multiple-sensitive systems. (c) 2005 Published by Elsevier Ltd
Multicompartment micelles are complex nanosized systems that possess a hydrosoluble shell and a hydrophobic core, which is characterized by segregated incompatible subdomains. With roots starting about ten years ago, the field of multi compartment micelles has evolved slowly, until recently when significant achievements have been made. The present article reviews strategies for building such micellar assemblies as well as morphological studies, highlights the future challenges, and discusses possible applications, which exploit the coexistence of differentiated nano- domains. Formation of multi compartment micelles using miktoarm stars mu-(polyethylethylene)(poly(ethylene oxide))(poly(perfluoropropylene oxide)) and a cryo-TEM image visualizing the process
Absorption and fluorescence properties of 4 hydraulic oils ( 3 biological and 1 petroleum-based) were investigated. In-situ LIF (laser-induced fluorescence) analysis of the oils on a brown sandy loam soil was performed. With calibration, quantitative detection was achieved. Estimated limits of detection were below ca. 500 mg/kg for the petroleum-based oil and ca. 2000 mg/kg for one biological oil. A semi-quantitative classification scheme is proposed for monitoring of the biological oils. This approach was applied to investigate the migration of a biological oil in soil- containing compartments, namely a soil column and a soil bed