Refine
Has Fulltext
- no (140)
Year of publication
Document Type
- Article (138)
- Monograph/Edited Volume (2)
Language
- English (140) (remove)
Is part of the Bibliography
- yes (140) (remove)
Keywords
- Detector modelling and simulations II (electric fields, charge transport, multiplication and induction, pulse formation, electron emission, etc) (1)
- Energy-dispersive Laue diffraction (1)
- Interaction of radiation with matter (1)
- Solid state detectors (1)
- X-ray imaging (1)
- X-ray spectroscopy (1)
- pnCCD (1)
Institute
Recently it has been shown that lateral carrier confinement in an InGaAs quantum well (QW) embedded in GaAs can be achieved by using a laterally patterned InGaP stressor layer on top of the heterostructure. To exploit this effect in a device the structure has to be planarized by a second epitaxial step. It has been shown that the lateral strain modulation almost vanishes after overgrowth with GaAs, whereas overgrowth with a single ternary layer of opposite strain compared to the stressor layer suffers from strain induced decomposition. Here we show that the lateral carrier confinement of the initially free standing nanostructure can almost be maintained using a two step process for overgrowth, where a strained thin ternary layer is grown first followed by GaAs up to complete planarization of the patterned structure. Thickness and composition of the ternary layer are adjusted on the basis of finite element calculations of the strain distribution (FEM). The strain field achieved after overgrowth is probed by X-ray grazing- incidence diffraction (GID). (c) 2005 Elsevier B.V. All rights reserved
Surface relief gratings were inscribed on azobenzene polymer films using a pulselike exposure of an Ar+ laser. The inscription process was initiated by a sequence of short pulses followed by much longer relaxation pauses. The development of the surface relief grating was probed by a He-Ne laser measuring the scattering intensity of the first- order grating peak. The growth time of the surface relief grating was found to be larger than the length of the pulses used. This unusual behavior can be considered as a nonlinear material response associated with the trans-cis isomerization of azobenzene moieties. In this study the polymer stress was assumed to be proportional to the number of cis-isomers. One-dimensional viscoelastic analysis was used to derive the polymer deformation. The rate of trans-cis isomerization increases with the intensity of the inscribing light; in the dark it is equal to the rate of thermal cis- trans isomerization. The respective relaxation times were estimated by fitting theoretical deformation curves to experimental data
We have developed a method to design a lateral band-gap modulation in a quantum well heterostructure. The lateral strain variation is induced by patterning of a stressor layer grown on top of a single quantum well which itself is not patterned. The three-dimensional (3D) strain distribution within the lateral nanostructure is calculated using linear elasticity theory applying a finite element technique. Based on the deformation potential approach the calculated strain distribution is translated into a local variation of the band-gap energy. Using a given vertical layer structure we are able to optimize the geometrical parameters to provide a nanostructure with maximum lateral band-gap variation. Experimentally such a structure was realized by etching a surface grating into a tensile-strained InGaP stressor layer grown on top of a compressively strained InGaAs-single quantum well. The achieved 3D strain distribution and the induced band-gap variation are successfully probed by x-ray grazing incidence diffraction and low-temperature photoluminescence measurements, respectively
The molecular in-plane structure of uranyl arachidate Langmuir-Blodgett (LB) films formed at different subphase pH values was analysed by means of X-ray grazing-incidence diffraction. For multilayers formed at low subphase pH a reorganisation of the arachidic acid film structure is confirmed. At appropriate subphase pH values, reorganisation of the film structure, e.g. via the formation of three-dimensional crystallites, is prevented by the presence of the uranyl ions and by the subsequent introduction of conformational disorder (gauche defects) in the alkyl chains. The observation of a macroscopic flow-induced in-plane texture in these uranyl arachidate LB films has profound implications for the design of ordered, supramolecular structures by the Langmuir-Blodgett technique.
Surface relief gratings on azobenzene containing polymer films were prepared under irradiation by actinic light. Finite element modeling of the inscription process was carried out using linear viscoelastic analysis. It was assumed that under illumination the polymer film undergoes considerable plastification, which reduces its original Young's modulus by at least three orders of magnitude. Force densities of about 10(11) N/m(3) were necessary to reproduce the growth of the surface relief grating. It was shown that at large deformations the force of surface tension becomes comparable to the inscription force and therefore plays an essential role in the retardation of the inscription process. In addition to surface profiling the gradual development of an accompanying density grating was predicted for the regime of continuous exposure. Surface grating development under pulselike exposure cannot be explained in the frame of an incompressible fluid model. However, it was easily reproduced using the viscoelastic model with finite compressibility. (C) 2004 American Institute of Physics
Thin films of amorphous Fe85Zr15 alloy were deposited by ion-beam sputtering of a composite target. Analogous to the melt-spun amorphous alloys of similar composition, the crystallization of the amorphous film occurs in two steps, however, with a substantially reduced thermal stability. After completion of the first crystallization step which starts at 473 K, the microstructure consists of 12 nm nanocrystals of bcc-Fe embedded in a grain boundary region of the remaining amorphous phase. At 673 K, the remaining amorphous phase transforms into the Fe2Zr alloy. The self-diffusion measurements of iron in the nanocrystalline state and in the parent amorphous state has been carried out using secondary ion mass spectroscopy (SIMS) depth profiling and neutron reflectivity techniques. In contrast to the case of finemet Fe73.5Si13.5B9Nb3Cu1 alloy, where a significant enhancement of diffusivity takes place in the nanocrystalline state, in the present case the diffusivity in the nanocrystalline state is similar to that in the parent amorphous state. It is suggested that in this system the atomic diffusion occurs mainly via the grain boundary regions. The calculated values of the pre-exponential factor and the activation energy for the diffusion are D-0 = 1 x 10(-14+/-1) m(2)/s and E = (0.7 +/- 0.1) eV respectively. (C) 2004 Published by Elsevier B.V.
Investigations of semiconductor surfaces and interfaces by X-ray grazing incidence diffraction
(2000)
Investigation of the chain-chain interface in a lead-stearate multilayer using neutron reflectivity
(1995)
Investigation of molecular diffusion across organic multilayers using neutron specular reflectivity
(1999)
The molecular orientation of azobenzene side groups in polymer films before (nonpatterned) and after (patterned) development of a surface relief grating has been investigated by photoelectron spectroscopy using synchrotron radiation. The photoemission spectra obtained for 60-100 eV photons of a patterned and a nonpatterned surface are similar when the polarization vector of the synchrotron light is parallel to the grating vector. However, for perpendicular excitation, considerable spectral intensity differences can be observed for 9-14 eV electron binding energy. The observed changes are attributed to the formation of well-oriented azobenzenes at the surface. (C) 2004 American Institute of Physics
A phase transition in an amphiphilic mesophase is explored to deliberately induce mechanical strain in an assembly of tightly coupled metal ion coordination centers. Melting of the alkyl chains in the amphiphilic mesophase causes distortion of the coordination geometry around the central transition metal ion. As a result, the crystal field splitting of the d-orbital subsets decreases resulting in a spin transition from a low-spin to a high-spin state. The diamagnetic-paramagnetic transition is reversible. This concept is demonstrated in a metallo-supramolecular coordination polyelectrolyte-amphiphile complex self-assembled from ditopic bis-terpyridines, Fe(II) as central transition metal, and dialkyl phosphates as amphiphiles. The magnetic properties are studied in a Langmuir-Blodgett multilayer. The modularity of this concept provides extensive control of structure and function from molecular to macroscopic length scales and gives access to a wide range of new molecular magnetic architectures such as nanostructures, thin films, and liquid crystals
In-plane strain and strain relaxation in laterally patterned Si/SiGe quantum dots and wire arrays
(1998)
In-plane strain and shape analysis of Si/SiGe nanostructures by grazing incidence diffraction
(2000)
In situ high temperature x-ray reflectivity and grazing incidence x-ray diffraction measurements in the energy dispersive mode are used to study the ordered face-centered tetragonal (fct) L1(0) phase formation in [Fe(19 angstrom)/ Pt(25 angstrom)](x10) multilayers prepared by ion beam sputtering. With the in situ x-ray measurements it is observed that (i) the multilayer structure first transforms to a disordered FePt and subsequently to an ordered fct L1(0) phase, (ii) the ordered fct L1(0) FePt peaks start to appear at 320°C annealing, (iii) the activation energy of the interdiffusion is 0.8 eV and (iv) ordered fct FePt grains have preferential out-of-plane texture. The magneto-optical Kerr effect and conversion electron Mossbauer spectroscopies are used to study the magnetic properties of the as- deposited and 400°C annealed multilayers. The magnetic data for the 400°C annealed sample indicate that the magnetization is at an angle of ~50° from the plane of the film.
In situ and ex situ SAXS investigation of colloidal sedimentation onto laterally patterned support
(2009)
We report on in situ investigations of colloidal ordering during gravity sedimentation from a colloidal suspension onto a prepatterned support using a polymeric surface relief grating (SRG) as the support. The ordering of colloids with a diameter of 420 nm was investigated by means of grazing-incidence small-angle X-ray scattering (GISAXS) and transmission SAXS using a preparation cell guaranteeing stable temperature and humidity. GISAXS was used for in situ monitoring of the time evolution of colloidal ordering within the whole illuminated sample area. The onset of ordering was indicated by the increase of integrated intensity within a small time frame shortly before complete evaporation of the dispersant. Single domains of coated samples were investigated ex situ by SAXS in transmission geometry where the irradiated sample area was 200 x 200 mu m(2) only. Domains with the typical size of a few millimeters were observed varying in orientation and crystallographic structure for various positions at the sample. They were mainly oriented along the grooves of the grating, confirming the influence of the underlying grating on colloidal ordering.
Strain analysis of a laterally patterned Si-wafer was carried out utilizing X-ray grazing-incidence diffraction with synchrotron radiation. The lateral patterning was done by focused ion beam implantation using an ion source of liquid AuGeSi alloy. Samples were prepared by either 35 keV Au+ ions (dose: 0.2, 2 x 10(14) cm(-2)) or 70 keV Ge++ ions (dose: 8 X 10(14) cm(-1)). It was shown that due to implantation a periodical defect structure is created consisting of both implanted and not implanted stripes. The evaluated depth distribution of defects within the implanted stripes corresponds to that obtained by TRIM calculation. The induced strain distribution, however, shows no periodicity. This can be explained by an overlap of the strain fields created in each implanted stripe. (c) 2005 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim
The glass transition process gets affected in ultrathin films having thickness comparable to the size of the molecules. We observe systematic broadening of the glass transition temperature (T-g) as the thickness of an ultrathin polymer film reduces below the radius of gyration but the change in the average T-g was found to be very small. The existence of reversible negative and positive thermal expansion below and above T-g increased the sensitivity of our thickness measurements performed using energy-dispersive x-ray reflectivity. A simple model of the T-g variation as a function of depth expected from sliding motion could explain the results
An increase in random molecular vibrations of a solid owing to heating above the melting point leads to a decrease in its long-range order and a loss of structural symmetry. Therefore conventional liquids are isotropic media. Here we report on a light-induced isothermal transition of a polymer film from an isotropic solid to an anisotropic liquid state in which the degree of mechanical anisotropy can be controlled by light. Whereas during irradiation by circular polarized light the film behaves as an isotropic viscoelastic fluid, it shows considerable fluidity only in the direction parallel to the light field vector under linear polarized light. The fluidization phenomenon is related to photoinduced motion of azobenzene-functionalized molecular units, which can be effectively activated only when their transition dipole moments are oriented close to the direction of the light polarization. We also describe here how the photofluidization allows nanoscopic elements of matter to be precisely manipulated