Refine
Has Fulltext
- no (128) (remove)
Year of publication
- 2014 (128) (remove)
Document Type
- Article (128) (remove)
Language
- English (128)
Is part of the Bibliography
- yes (128)
Keywords
- Arenesulfonamides (2)
- Cycloaddition (2)
- Janus emulsions (2)
- Trifluoromethanesulfonamide (2)
- X-ray (2)
- anomalous diffusion (2)
- arsenolipids present (2)
- biomaterials (2)
- carbohydrates (2)
- cod-liver (2)
- fatty-acids (2)
- hybrid materials (2)
- identification (2)
- living cells (2)
- metathesis (2)
- nanoparticles (2)
- physiological consequences (2)
- ruthenium (2)
- tandem reaction (2)
- visible-light (2)
- (+)-Tephrodin (1)
- (Anti)aromaticity (1)
- 1,1-dimethyl-1,2,3,4-tetrahydrosiline (1)
- 1,3-Dienes (1)
- 1,5-Dienes (1)
- 3,4-dihydro-2H-pyran (1)
- 3,4-dihydro-2H-thiopyran (1)
- 3,6-Diazabicyclo[3.1.0]hexanes (1)
- 3,8-Diazabicyclo[3.2.1]octane (1)
- 3-Oxo-14 alpha, 15 alpha-epoxyschizozygine (1)
- 3D electrode structures (1)
- 4,4-dimethyl-3,4-dihydro-2H-1,4-thiasiline (1)
- 6 alpha-Hydroxy-alpha-toxicarol (1)
- Acetylpolyamine amidohydrolases (1)
- Adsorption kinetic (1)
- Allylic oxidation (1)
- Alternating polyampholytes (1)
- Anisotropy effect (1)
- Antibody (1)
- Antimicrobial activities (1)
- Aromaticity (1)
- Base pairing (1)
- Binding assay (1)
- Block copolymers (1)
- Bulbine frutescens (1)
- C-13 (1)
- C-13 chemical shift difference Delta delta(C C) (1)
- Carbene ligands (1)
- Carbohydrates (1)
- Cassiamin A (1)
- Cassiamin B (1)
- Chelatoaromaticity (1)
- Chemotaxonomy (1)
- Click chemistry (1)
- Conformational equilibrium (1)
- Copper Metal Complexes (1)
- Copper(II) (1)
- Cross coupling (1)
- Cryo-SEM (1)
- Crystal structure (1)
- Cyclic GMP (1)
- Cytotoxicity (1)
- DLS (1)
- Dependent light scattering (1)
- Dielectric properties (1)
- Dimeric anthraquinone (1)
- Diterpenoid (1)
- Dodonaea angustifolia (1)
- Dynamic NMR (1)
- ESI-MS (1)
- ESR (1)
- Emulsification (1)
- Emulsion destabilization (1)
- Escherichia coli (1)
- F-19 (1)
- FLNS (1)
- Fabry-Perot etalon (1)
- Flavanone (1)
- Flavone (1)
- Fluorescence (1)
- Fluorescence life time (1)
- Fluorescent nanoconjugate (1)
- Fokker-Planck equations (1)
- GC-MS (1)
- H-1 (1)
- Hapten (1)
- Hard sphere model in the Percus-Yevick Approximation (1)
- Hemiporphyrazines (1)
- High-cell-density culture (1)
- High-resolution spectrometer (1)
- Histone deacetylases (1)
- Homogeneous catalysis (1)
- Interfacial equilibrium (1)
- Interfacial tension (1)
- Ionic Liquid (1)
- Ionic liquids (1)
- Isolations (1)
- Janus drops (1)
- LIBS (1)
- Langmuir layers (1)
- Laser-induced breakdown spectroscopy (1)
- Magnetic properties (1)
- Maltose-modified PEI (1)
- Mammea usambarensis (1)
- Mammea-type coumarins (1)
- Mars (1)
- Mechanical properties (1)
- Metathesis (1)
- Methane (1)
- Methanogens (1)
- Michael addition (1)
- Microfluidics (1)
- Microparticles Reagentless assay (1)
- Micropolarity (1)
- Microviscosity (1)
- Millettia dura; (1)
- Millettia leucantha (1)
- Millettia oblata ssp teitensis (1)
- Miniaturized cultivations (1)
- Molecular Probe (1)
- Monte-Carlo simulations (1)
- Multiple light scattering (1)
- N-azobenzylchitosan (1)
- N-methylnicotinamide (1)
- NMR (1)
- Nanosensor (1)
- Naphthyridines (1)
- Network structure (1)
- Nicotinamide (1)
- Occupation quotient pi*/pi (1)
- Optical oxygen sensor (1)
- Oxygen heterocycles (1)
- PQQ-GDH (1)
- Palladium (1)
- Paratope (1)
- Phenylanthraquinone (1)
- Phospholipids (1)
- Plasmid DNA production (1)
- Plasmodium falciparum (1)
- Platelet (1)
- Platinum group metals (1)
- Polarization elements (1)
- Polycyclic aromatic hydrocarbons (1)
- Polymer dispersions (1)
- Polymerized ionic liquids (1)
- Polypeptide (1)
- Polystyrene-divinylbenzene (1)
- Porphyrins (1)
- Pseudomonas aeruginosa (1)
- Push-pull alkynes (1)
- Push-pull effect (1)
- Quantum Chemical Calculations (1)
- Quantum dots (1)
- RP-HPLC (1)
- Radicals (1)
- Raman spectroscopy (1)
- Ruthenium (1)
- Schizozygane indoline alkaloid (1)
- Schizozygia coffaeoides (1)
- SnAr reaction (1)
- Solid-phase extraction (1)
- Spin probes (1)
- Spinning drop (1)
- Steric hindrance (1)
- Structural investigations (1)
- Structure revision (1)
- Sub-zero temperature (Celsius) (1)
- Sulphoxide (1)
- Surface exudates (1)
- Template phase (1)
- Tephrosia purpurea (1)
- Tephrosia villosa (1)
- Tetraoxo[8]circulenes (1)
- Tetraphenylethene Bioassay Fluorescent dye (1)
- Theoretical calculations (1)
- Thermal behavior (1)
- Thermoresponsive (1)
- Thiol-X (1)
- TiO2 nanoparticles (1)
- ToF-SIMS (1)
- Wacker reaction (1)
- Wavelength modulation spectroscopy (laser spectroscopy) (1)
- Xanthone (1)
- Yukawa model in the Mean Spherical Approximation (1)
- absorbtion fine-structure (1)
- absorption (1)
- acinar-cells (1)
- adduct formation (1)
- adhesives (1)
- adsorption (1)
- amphiphilic polymer assembly (1)
- anti-polyelectrolyte effect (1)
- attachment (1)
- augmented-wave method (1)
- azobenzenes (1)
- bioelectrochemistry (1)
- biomineralization (1)
- biosensor (1)
- bladder-cancer (1)
- block copolymers (1)
- brewster angle microscopy (1)
- brownian-motion (1)
- calcium phosphate (1)
- carcinogen exposure (1)
- carotenoids (1)
- cations (1)
- cell-death (1)
- cellulose (1)
- chemoradiation therapy (1)
- chitosan (1)
- chlorophyll (1)
- chromoionophore (1)
- click chemistry (1)
- cockroach salivary-glands (1)
- conductive polymer (1)
- construction (1)
- crosslinking (1)
- crystal structures (1)
- cyclization (1)
- cytosine methylation (1)
- cytosolic sodium (1)
- damage (1)
- de novo synthesis (1)
- density functional calculations (1)
- diffractive elements (1)
- diimine-complexes (1)
- direct bioelectrocatalysis (1)
- dna coiling (1)
- drugs (1)
- dyes/pigments (1)
- dynamics (1)
- electrically switchable gratings. (1)
- electron-transfer (1)
- ellipsometry (1)
- emulsion microscopy (1)
- energy transfer (1)
- europium complex (1)
- excimer UV light (1)
- excision-repair (1)
- excitation (1)
- excluded volume (1)
- exposure (1)
- fish (1)
- flight search patterns (1)
- fluctuation-dissipation theorem (1)
- fluorescence (1)
- fluorescence correlation spectroscopy (1)
- fluorescence label (1)
- fluorescence photobleaching recovery (1)
- folding kinetics (1)
- food contact material (1)
- fractional dynamics approach (1)
- frameworks (1)
- gas-phase (1)
- gene-expression (1)
- gene-regulation kinetics (1)
- genomic dna methylation (1)
- graphene oxide (1)
- graphite (1)
- grazing incidence X-ray diffraction (1)
- green (1)
- hela-cells (1)
- hemocompatibility (1)
- heterocycles (1)
- human-cells (1)
- hydrogen (1)
- imidazole (1)
- in-vitro (1)
- indicators (1)
- induced malignant-transformation (1)
- infection pathway (1)
- initio molecular-dynamics (1)
- intermittent chaotic systems (1)
- intracellular na+ (1)
- ion exchange (1)
- ion optodes (1)
- ionic liquid (1)
- ionic liquids (1)
- ionophore (1)
- isomerization (1)
- isotope effect (1)
- kinetic models (1)
- lactate (1)
- langevin equation (1)
- levy flights (1)
- lifetime microscopy (1)
- lipid monolayer (1)
- low-energy electrons (1)
- macroITO (1)
- manganese (1)
- marine oils (1)
- mass-spectrometry (1)
- membrane (1)
- membranes (1)
- mesoporous materials (1)
- metabolites (1)
- metal coordination (1)
- methylmercury (1)
- methyltransferases dnmt3a (1)
- microemulsions (1)
- microporous organic polymers (1)
- mixtures (1)
- models (1)
- molecular dynamics simulations (1)
- molecular rods (1)
- molecular-mechanisms (1)
- morphology (1)
- nano clay (1)
- nanobioconjugate (1)
- nanoclusters (1)
- nematic phase (1)
- neurodegenerative diseases (1)
- neurotoxicity (1)
- oil (1)
- onformational analysis (1)
- oxidation (1)
- periplaneta-americana (1)
- photochemistry (1)
- photochromism (1)
- photoinduced radical polymerization (1)
- photon-counting statistics (1)
- photooxidation (1)
- photoswitches (1)
- pi-pi stacking (1)
- platelet aging (1)
- platelet function (1)
- platelet rich plasma (1)
- platelet storage (1)
- polarization gratings (1)
- poly(ADP-ribose) polymerase-1 (1)
- poly(epsilon-caprolactone) methacrylate (1)
- polyelectrolyte adsorption (1)
- polyesterurethane (1)
- polyesterurethanes (1)
- polymer (1)
- polymer micelles (1)
- polymer/LC composites (1)
- polyzwitterion (1)
- quantum dots (1)
- random-walks (1)
- rat (1)
- reactivity (1)
- rearrangement (1)
- reduction (1)
- relaxation NMR spectroscopy (1)
- repair (1)
- resonant formation (1)
- restricted N-S rotation (1)
- rp-hplc (1)
- sacrificial bonds (1)
- samples (1)
- seco-Anthraquinone (1)
- self-assembly (1)
- self-healing materials (1)
- sensors (1)
- shape-memory effect (1)
- side reaction (1)
- simulations (1)
- single-particle tracking (1)
- single-strand breaks (1)
- sodium green (1)
- sol-gel processes (1)
- sorption (1)
- spatial-organization (1)
- statistical copolymer (1)
- substituent effects (1)
- sulfobetaine (1)
- supported gold (1)
- surface (1)
- surface charge (1)
- surface chemistry (1)
- switchable retarder (1)
- switches (1)
- synthesis (1)
- systems (1)
- thermoresponsive materials (1)
- thimerosal (1)
- thio-dimethylarsinic acid (1)
- tight-binding (1)
- time random-walks (1)
- time-resolved fluorescence (1)
- transition (1)
- trivalent (1)
- two-dimensional phases (1)
- upper critical solution temperature (1)
- ventricular myocytes (1)
- visible light (1)
- vitro toxicological characterization (1)
- water (1)
- weak ergodicity breaking (1)
- whole blood (1)
- xanthophylls (1)
Institute
- Institut für Chemie (128) (remove)
Graphitic carbon nitride, g-C3N4, is a promising organic photo-catalyst for a variety of redox reactions. In order to improve its efficiency in a systematic manner, however, a fundamental understanding of the microscopic interaction between catalyst, reactants and products is crucial. Here we present a systematic study of water adsorption on g-C3N4 by means of density functional theory and the density functional based tight-binding method as a prerequisite for understanding photocatalytic water splitting. We then analyze this prototypical redox reaction on the basis of a thermodynamic model providing an estimate of the overpotential for both water oxidation and H+ reduction. While the latter is found to occur readily upon irradiation with visible light, we derive a prohibitive overpotential of 1.56 eV for the water oxidation half reaction, comparing well with the experimental finding that in contrast to H-2 production O-2 evolution is only possible in the presence of oxidation cocatalysts.
Anomalous diffusion is frequently described by scaled Brownian motion (SBM), a Gaussian process with a power-law time dependent diffusion coefficient. Its mean squared displacement is < x(2)(t) similar or equal to 2K(t)t with K(t) similar or equal to t(alpha-1) for 0 < alpha < 2. SBM may provide a seemingly adequate description in the case of unbounded diffusion, for which its probability density function coincides with that of fractional Brownian motion. Here we show that free SBM is weakly non-ergodic but does not exhibit a significant amplitude scatter of the time averaged mean squared displacement. More severely, we demonstrate that under confinement, the dynamics encoded by SBM is fundamentally different from both fractional Brownian motion and continuous time random walks. SBM is highly non-stationary and cannot provide a physical description for particles in a thermalised stationary system. Our findings have direct impact on the modelling of single particle tracking experiments, in particular, under confinement inside cellular compartments or when optical tweezers tracking methods are used.
New porous materials based on covalently connected monomers are presented. The key step of the synthesis is an acetalisation reaction. In previous years we used acetalisation reactions extensively to build up various molecular rods. Based on this approach, investigations towards porous polymeric materials were conducted by us. Here we wish to present the results of these studies in the synthesis of 1D polyacetals and porous 3D polyacetals. By scrambling experiments with 1D acetals we could prove that exchange reactions occur between different building blocks (evidenced by MALDI-TOF mass spectrometry). Based on these results we synthesized porous 3D polyacetals under the same mild conditions.
As a part of searching for fully aromatic chelate compounds, copper complexes of malondialdehyde as well as its sulfur and selenium derivatives were investigated using the DFT quantum chemical methods. Chelate complexes of both Cu(I) and Cu(II) ions wereconsidered. Aromaticity of the metal complexes studied were analyzed using NICS(0), NICS(1), PDI, I-ring, MCI, ICMCI and I-B aromaticity indices, and by TSNMRS visualizations of the spatial magnetic properties. It seems that partial aromaticityof studied chelates increases when oxygen atoms in malondialdehyde are replaced by sulfur and selenium.
The large-scale green synthesis of graphene-type two-dimensional materials is still challenging. Herein, we describe the ionothermal synthesis of carbon-based composites from fructose in the iron-containing ionic liquid 1-butyl-3-methylimidazolium tetrachloridoferrate(III), [Bmim][FeCl4] serving as solvent, catalyst, and template for product formation. The resulting composites consist of oligo-layer graphite nanoflakes and iron carbide particles. The mesoporosity, strong magnetic moment, and high specific surface area of the composites make them attractive for water purification with facile magnetic separation. Moreover, Fe3Cfree graphite can be obtained via acid etching, providing access to fairly large amounts of graphite material. The current approach is versatile and scalable, and thus opens the door to ionothermal synthesis towards the larger-scale synthesis of materials that are, although not made via a sustainable process, useful for water treatment such as the removal of organic molecules.
Polyglycolide (PGA) is a biodegradable polymer with multiple applications in the medical sector. Here the synthesis of high molecular weight polyglycolide by ring-opening polymerization of diglycolide is reported. For the first time stabilizer free supercritical carbon dioxide (scCO(2)) was used as a reaction medium. scCO(2) allowed for a reduction in reaction temperature compared to conventional processes. Together with the lowering of monomer concentration and consequently reduced heat generation compared to bulk reactions thermal decomposition of the product occurring already during polymerization is strongly reduced. The reaction temperatures and pressures were varied between 120 and 150 degrees C and 145 to 1400 bar. Tin(II) ethyl hexanoate and 1-dodecanol were used as catalyst and initiator, respectively. The highest number average molecular weight of 31 200 g mol(-1) was obtained in 5 hours from polymerization at 120 degrees C and 530 bar. In all cases the products were obtained as a dry white powder. Remarkably, independent of molecular weight the melting temperatures were always at (219 +/- 2)degrees C.
Modern microscopic techniques following the stochastic motion of labelled tracer particles have uncovered significant deviations from the laws of Brownian motion in a variety of animate and inanimate systems. Such anomalous diffusion can have different physical origins, which can be identified from careful data analysis. In particular, single particle tracking provides the entire trajectory of the traced particle, which allows one to evaluate different observables to quantify the dynamics of the system under observation. We here provide an extensive overview over different popular anomalous diffusion models and their properties. We pay special attention to their ergodic properties, highlighting the fact that in several of these models the long time averaged mean squared displacement shows a distinct disparity to the regular, ensemble averaged mean squared displacement. In these cases, data obtained from time averages cannot be interpreted by the standard theoretical results for the ensemble averages. Here we therefore provide a comparison of the main properties of the time averaged mean squared displacement and its statistical behaviour in terms of the scatter of the amplitudes between the time averages obtained from different trajectories. We especially demonstrate how anomalous dynamics may be identified for systems, which, on first sight, appear to be Brownian. Moreover, we discuss the ergodicity breaking parameters for the different anomalous stochastic processes and showcase the physical origins for the various behaviours. This Perspective is intended as a guidebook for both experimentalists and theorists working on systems, which exhibit anomalous diffusion.
For in vitro studies assessing the interaction of platelets with implant materials, common and standardized protocols for the preparation of platelet rich plasma (PRP) are lacking, which may lead to non-matching results due to the diversity of applied protocols. Particularly, the aging of platelets during prolonged preparation and storage times is discussed to lead to an underestimation of the material thrombogenicity. Here, we study the influence of whole blood-and PRP-storage times on changes in platelet morphology and function.
Whole blood PFA100 closure times increased after stimulation with collagen/ADP and collagen/epinephrine. Twenty four hours after blood collection, both parameters were prolonged pathologically above the upper limit of the reference range. Numbers of circulating platelets, measured in PRP, decreased after four hours, but no longer after twenty four hours. Mean platelet volumes (MPV) and platelet large cell ratios (P-LCR, 12 fL - 40 fL) decreased over time. Immediately after blood collection, no debris or platelet aggregates could be visualized microscopically. After four hours, first debris and very small aggregates occurred. After 24 hours, platelet aggregates and also debris progressively increased. In accordance to this, the CASY system revealed an increase of platelet aggregates (up to 90 mu m diameter)with increasing storage time.
The percentage of CD62P positive platelets and PF4 increased significantly with storage time in resting PRP. When soluble ADP was added to stored PRP samples, the number of activatable platelets decreased significantly over storage time. The present study reveals the importance of a consequent standardization in the preparation of WB and PRP. Platelet morphology and function, particularly platelet reactivity to adherent or soluble agonists in their surrounding milieu, changed rapidly outside the vascular system. This knowledge is of crucial interest, particularly in the field of biomaterial development for cardiovascular applications, and may help to define common standards in the in vitro hemocompatibility testing of biomaterials.
We report a 1,2,3-triazol fluoroionophore for detecting Na+ that shows in vitro enhancement in the Na+-induced fluorescence intensity and decay time. The Na+-selective molecule 1 was incorporated into a hydrogel as a part of a fiber optical sensor. This sensor allows the direct determination of Na+ in the range of 1-10 mM by measuring reversible fluorescence decay time changes.
Surface modification with thermoresponsive polymer brushes for a switchable electrochemical sensor
(2014)
Elaboration of switchable surfaces represents an interesting way for the development of a new generation of electrochemical sensors. In this paper, a method for growing thermoresponsive polymer brushes from a gold surface pre-modified with polyethyleneimine (PEI), subsequent layer-by-layer polyelectrolyte assembly and adsorption of a charged macroinitiator is described. We propose an easy method for monitoring the coil-to-globule phase transition of the polymer brush using an electrochemical quartz crystal microbalance with dissipation (E-QCM-D). The surface of these polymer modified electrodes shows reversible switching from the swollen to the collapsed state with temperature. As demonstrated from E-QCM-D measurements using an original signal processing method, the switch is operating in three reversible steps related to different interfacial viscosities. Moreover, it is shown that the one electron oxidation of ferrocene carboxylic acid is dramatically affected by the change from the swollen to the collapsed state of the polymer brush, showing a spectacular 86% decrease of the charge transfer resistance between the two states.
In situ imidazolate-4,5-diamide-2-olate linker generation leads to the formation of a [Zn-14(L2)(12)(O)-(OH)(2)(H2O)(4)] molecular building block (MBB) with a Zn-6 octahedron inscribed in a Zn-8 cube. The MBBs connect by amide-amide hydrogen bonds to a 3D robust supramolecular network which can be activated for N-2, CO2, CH4, and H-2 gas sorption.
We present a novel laser pulse control for the chiroptical switch 1-(2-cis-fluoroethenyl)-2-fluoro-3,5-dibromobenzene mounted on adamantane, where the latter imitates a linker group or part of a solid surface. This molecular device offers three switching states: a true achiral "off"-state and two chiral "on"-states of opposite handedness. Due to the alignment of its chiral axis along the surface normal several defined orientations of the switch have to be considered for an efficient stereocontrol strategy. In addition to these different initial conditions, coupled torsional degrees of freedom around the chiral axis make the quest for highly stereoselective laser pulses a challenge. The necessary flexibility in pulse accomplished by employing the iterative stochastic pulse optimization method we presented recently. Still, the complexity of the system dictates a combined treatment by fast molecular dynamics and computationally intensive quantum dynamics. Although quantum effects are found to be of importance, the pulses optimized within the classical treatment allow us to turn on the chirality of the switch, achieving high enantioselectivity in the quantum treatment for all orientations at the same time.
Janus emulsions were formed by mixing three immiscible liquids; this implies two oil components (i.e. olive oil (00) and silicone oil (SiO)) with water in presence of interfacial active components. The morphology and size of Janus droplets formed strongly depended on the type of surfactant used. In presence of a non-ionic surfactant, i.e. Tween 80, large engulfed Janus droplets were formed. By adding phospholipids to the system the droplet size was decreased and more stable Janus droplets formed. Interfacial tension measurements carried out using a spinning drop apparatus and a ring tensiometer demonstrate that interfacial tension is the most important factor controlling the size, morphology and stability of Janus droplets. When the interfacial tension between oil and water becomes <= 1 mN/m, smaller Janus droplets are formed. Such conditions are fulfilled when phospholipids are used in combination with non-ionic surfactant Tween 80. The morphology of the double droplets is predominantly controlled by the viscosity and interfacial tension between the two oil phases. By using different types of phospholipids, i.e. asolectin and lecithin instead of a more concentrated phosphatidylcholine (phospholipon), the interfacial tension is decreased and different morphologies of engulfing can be observed.
This Letter is focused on the one-pot formation of CdS nanoparticles in aqueous medium in presence of polyethyleneimine (PEI). Quantum dots can be obtained by adding a pre-cooled aqueous Na2S solution to a pre-cooled aqueous CdCl2 solution dropwise in presence of PEI.
Field flow fractionation in combination with TEM experiments show a time dependent agglomeration of individual quantum dots from 1.6 nm up to 3.2 nm in size. The hyperbranched PEI of moderate molar mass (>20000 g/mol) is an excellent polymer to prevent a further increase of the particle size. Therefore, stable fluorescent PEI-capped CdS quantum dots are available.
Micellar multilayer films were prepared from an amphiphilic comb-like polycation ("polysoap") and the polyanion poly(styrene sulfonate) (PSS) using alternate polyelectrolyte layer-by-layer (LbL) self-assembly. Linear growth of the film thickness was evidenced by UV-vis spectroscopy and spectroscopic ellipsometry. Imaging by atomic force microscopy (AFM) indicated that the micellar conformation adopted by the polycation in solutions was preserved in the films. Thus, hydrophobic photoactive molecules, which were solubilized by the hydrophobic nanodomains of the micellar polymer prior to deposition, could be transferred into the films. Photoinduced energy transfer was observed in the nanostructured multilayers between naphthalene (donor) and perylene (acceptor) molecules embedded inside the polymer micelles. The efficiency of the energy transfer process can be controlled to some extent by introducing spacer layers between the layers containing the donor or acceptor, revealing partial stratification of the micellar LbL films. Also, photoinduced electron transfer was evidenced between perylene (donor) and butyl viologen (acceptor) molecules embedded inside the multilayers by steady-state fluorescence spectroscopy. The obtained photoactive nanostructures are promising candidates for solar-to-chemical energy conversion systems.
We investigate the torsion potentials in two prototypical pi-conjugated polymers, polyacetylene and polydiacetylene, as a function of chain length using different flavors of density functional theory. Our study provides a quantitative analysis of the delocalization error in standard semilocal and hybrid density functionals and demonstrates how it can influence structural and thermodynamic properties. The delocalization error is quantified by evaluating the many-electron self-interaction error (MESIE) for fractional electron numbers, which allows us to establish a direct connection between the MESIE and the error in the torsion barriers. The use of non-empirically tuned long-range corrected hybrid functionals results in a very significant reduction of the MESIE and leads to an improved description of torsion barrier heights. In addition, we demonstrate how our analysis allows the determination of the effective conjugation length in polyacetylene and polydiacetylene chains.
A cluster approach extended to the ONIOM methodology has been applied using several density functionals and Moller-Plesset perturbation theory (MP2) to simulate the adsorption of selected nitrogen-containing compounds [NCCs, 2,4,6-trinitrotoluene (TNT), 2,4-dinitrotoluene (DNT), 2,4-dinitroanisole (DNAN), and 3-nitro-1,2,4-triazole-5-one (NTO)] on the hydroxyated (100) surface of a-quartz. The structural properties were calculated using the M06-2X functional and 6-31G(d,p) basis set. The M06-2X-D3, PBE-D3, and MP2 methods were used to calculate the adsorption energies. Results have been compared with the data from other studies of adsorption of compounds of similar nature on silica. Effect of deformation of the silica surface and adsorbates on the binding energy values was also studied. The atoms in molecules (AIM) analysis was employed to characterize the adsorbate-adsorbent binding and to calculate the bond energies. The silica surface shows different sorption affinity toward the chemicals considered depending on their electronic structure. All target NCCs are physisorbed on the modeled silica surface. Adsorption occurs due to the formation of multiple hydrogen bonds between the functional groups of NCCs and surface silanol groups. Parallel orientation of NCCs interacting with the silica surface was found to be favorable when compared with perpendicularly oriented NCCs. NTO was found to be the most strongly adsorbed on the silica surface among all of the considered compounds. Dispersion correction was shown to play an important role in the DFT calculations of the adsorption energies of silica-NCC systems.
A dual probe was investigated by UV-Vis, fluorescence, and ESR spectroscopy. It comprises the pyrene chromophore and the paramagnetic 2,2,6,6-tetramethylpiperidinyl-N-oxyl radical that are covalently linked together via an ester bridge. The dual probe was used to investigate molecular solvents of different polarity as well as ionic liquids bearing either imidazolium or pyrrolidinium cations and various anions, such as bis(trifluoromethylsulfonyl)imide, tetrafluoroborate, tris(pentafluoroethyl)trifluorophosphate, or dicyanamide. The dual probe does not show solvatochromism that is typical for some pyrenes. Furthermore, the dual probe is considerable less mobile compared to 2,2,6,6-tetramethylpiperidinyl-N-oxyl (TEMPO) without additional substituent as detected by ESR spectroscopy. This is caused by the bulky pyrenyl substituent bound at the dual probe resulting in a reduced mobility of the dual probe.
The rare carbohydrate L-(+)-noviose was synthesized from enantiomerically pure L-lactate. The configuration at C-4 was established by diastereoselective nucleophilic addition to an in-situ-generated lactaldehyde. The resulting homoallylic alcohol was further transformed into a set of ring-closing metathesis (RCM) precursors. These compounds were converted into noviose in few steps using RCM and RCM-allylic-oxidation sequences.
This study is a first-hand report of the immobilization of Nauclea diderrichii seed waste biomass (ND) (an agro-waste) with eco-friendly mesoporous silica (MS) and graphene oxide-MS (GO+MS ) nanoparticles, producing two new hybrid materials namely: MND adsorbent for agro-waste modified with MS and GND adsorbent for agro-waste modified with GO+MS nanoparticles showed improved surface area, pore size and pore volume over those of the agro-waste. The abstractive potential of the new hybrid materials was explored for uptake of Cr(III) and Pb(II) ions. Analysis of experimental data from these new hybrid materials showed increased initial sorption rate of Cr(III) and Pb(II) ions uptake. The amounts of Cr(III) and Pb(II) ions adsorbed by MND and GND adsorbents were greater than those of ND. Modification of N. diderrichii seed waste significantly improved its rate of adsorption and diffusion coefficient for Cr(III) and Pb(II) more than its adsorption capacity. The rate of adsorption of the heavy metal ions was higher with GO+MS nanoparticles than for other adsorbents. Kinetic data were found to fit well the pseudo-second-order and the diffusion-chemisorption kinetic models suggesting that the adsorption of Cr(III) and Pb(II) onto these adsorbents is mainly through chemisorption mechanism. Analysis of kinetic data with the homogeneous particle diffusion kinetic model suggests that particle diffusion (diffusion of ions through the adsorbent) is the rate-limiting step for the adsorption process.
Ionic liquids were investigated with both stable radicals on the basis of 2,2,6,6-tetramethylpiperidine-1-yloxyl (TEMPO) and photogenerated lophyl radicals. The ionic liquids are composed either of bis(trifluoromethylsulfonyl)imide (NTf2) as anion and various cations or they contain an imidazolium ion in combination with various anions. The cations include imidazolium, pyrrolidinium, piperidinium, polymethine or ammonium ions. Furthermore, BF4-, PF6-, triflate, camphorsulfonate, lactate, tosylate or tris(pentafluoroethyl) trifluorophosphate (FAP) are the counter ions in the imidazolium salts. The structural variation of the ionic liquids results in differences in glass formation, semiaystallinity, or crystallinity, as well as in viscosity differences. Furthermore, a vinyl substituent at the imidazolium ion and a methacryloyloxyethyl substituent at the ammonium ion result in polymerizable ionic liquids that were converted via a radical mechanism in amorphous polymerized ionic liquids with a glass transition temperature, which is significantly higher compared to the ionic liquids. An additional substituent at TEMPO causes additional hydrogen bond formation or additional Coulomb interactions with the individual ions of the ionic liquids compared to TEMPO. This influences the mobility of these radicals in the ionic liquid expressed by differences in the average rotational correlation time (T-rot). The mobility of the radicals in the ionic liquids as function of the temperature describes ionic liquids either as continuum in analogy to molecular solvents using the Stokes-Einstein model, that is the case for 1-butyl-3-methylimidazolium NTf2, or as medium where free volume effects are important for the mobility of a solute in the ionic liquid using the model of Spernol, Gierer, and Wirtz. The 1-butyl-3-methylimidazolium BF4- fits well into the latter. Furthermore, the isotropic hyperfine coupling constant (A(iso)(N-14)) of the stable radicals gives information about micropolarity of the ionic liquids only if the mobility of the radical is high enough in the ionic liquid. In addition to the rotational mobility of the stable radicals, the photogenerated lophyl radicals give information about translational diffusion of radicals and solvent cage effects in the ionic liquids. The application of the Eyring equation results mostly in the expected negative values of the activation entropy for the transition state that is typical for bimolecular reactions. Only few examples show a less negative or positive activation entropy for the bimolecular reaction, which may be attributed to radical recombination within the solvent cage to a high extent. The results obtained during investigation of radicals in ionic liquids are important to understand the radical processes in ionic liquids that may occur for example in dye sensitized solar cells, photo or thermally induced reactions or radical polymerizations in ionic liquids.
H-1 NMR relaxation is used to study the self-assembly of a double thermoresponsive diblock copolymer in dilute aqueous solution. Above the first transition temperature, at which aggregation into micellar structures is observed, the trimethylsilyl (TMS)-labeled end group attached to the shell-forming block shows a biphasic T-2 relaxation. The slow contribution reflects the TMS groups located at the periphery of the hydrophilic shell, in agreement with a star-like micelle. The fast T-2 contribution corresponds to the TMS groups, which fold back toward the hydrophobic core, reflecting a flower-like micelle. These results confirm the formation of block copolymer micelles of an intermediate nature (i.e., of partial flower-like and star-like character), in which a part of the TMS end groups folds back to the core due to hydrophobic interactions.
The CH2Cl2/MeOH (1: 1) extract of the stem bark of Millettia oblata ssp. teitensis showed antiplasmodial activity (IC50 = 10-12 mu g/mL) against the chloroquine-sensitive (D6) and chloroquine-resistant (W2) strains of Plasmodium falciparum. Chromatographic separation of the extract led to the isolation of a new isoflavone, 4'-prenyloxyderrone (1), together with known isoflavones (8-O-methylretusin, durmillone, maximaisoflavone B, maximaisoflavone H and maximaisoflavone J), a rotenoid (tephrosin) and a triterpene (lupeol). Similar investigation of Millettia leucantha resulted in the identification of the isoflavones afrormosin and wistin, and the flavone chrysin. The identification of these compounds was based on their spectroscopic data. Five of the isoflavones isolated from these plants as well as 11 previously reported compounds from Millettia dura were tested and showed good to moderate antiplasmodial activities (IC50 = 13-53 mu M), with the new compound, 4'-prenyloxyderrone, being the most active (IC50 = 13-15 mu M).
Characterization of interactions between antigens and antibodies is of utmost importance both for fundamental understanding of the binding and for development of advanced clinical diagnostics. Here, fluorescence line-narrowing (FLN) spectroscopy was used to study physicochemical interactions between 3-hydroxybenzo[a]pyrene (3OH-BaP, as antigen) and a variety of solvent matrices (as model systems) or anti-polycyclic aromatic hydrocarbon antibodies (anti-PAH). We focused the studies on the specific physicochemical interactions between 3OH-BaP and different, previously obtained, monoclonal and recombinant anti-PAH antibodies. Control experiments performed with non-binding monoclonal antibodies and bovine serum albumin (BSA) indicated that nonspecific interactions did not affect the FLN spectrum of 3OH-BaP. The spectral positions and relative intensities of the bands in the FLN spectra are highly dependent on the molecular environment of the 3OH-BaP. The FLN bands correlate with different vibrational modes of 3OH-BaP which are affected by interactions with the molecular environment (pi-pi interactions, H-bonding, or van-der-Waals forces). Although the analyte (3OH-BaP) was the same for all the antibodies investigated, different binding interactions could be identified from the FLN spectra on the basis of structural flexibility and conformational multiplicity of the antibodies' paratopes.
Transparent, ion-conducting, and flexible ionogels based on the room temperature ionic liquid (IL) 1-butyl-3-methylimidazolium bis(trifluoromethane sulfonyl) imide [Bmim][N(Tf)(2)], the dye-IL (DIL) 1-butyl-3-methylimidazolium methyl orange [Bmim][MO], and poly(methylmethacrylate) (PMMA) are prepared. Upon IL incorporation the thermal stability of the PMMA matrix significantly increases from 220 to 280 degrees C. The ionogels have a relatively high ionic conductivity of 10(-4) S cm(-1) at 373 K. Most importantly, the ionogels exhibit a strong and reversible color change when exposed to aqueous or organic solutions containing protons or hydroxide ions. The resulting material is thus a prototype of soft multifunctional matter featuring ionic conductivity, easy processability, response to changes in the environment, and a strong readout signal, the color change, that could be used in optical data storage or environmental sensing.
The Suzuki-Miyaura couplings of o-, m-, and p-halophenols with o-, m-, and p-phenol boronic acids were investigated for all combinations under standardized conditions, using Pd/C as a heterogeneous catalyst and water as a solvent. In the case of iodophenols, conventional heating was used, while for bromophenols significantly better results could be obtained using microwave irradiation. This systematic study revealed that 2,4'-biphenol is particularly difficult to access, irrespective of the starting materials used, but that these difficulties can be overcome by using different additives. The conclusions drawn from this investigation allowed us to identify conditions for the protecting group-free or minimized total synthesis of biaryl-type phytoalexins. These compounds possess antibacterial activity and are produced by fruit trees as a response to microbial infection.
Passive and active polarization elements were created by surface and bulk photo-alignment of LCs, reactive LCs, photo-sensitive LCP and photo-curable monomer/LC composites. The use of different photo-sensitive liquid crystalline materials for the development of highly anisotropic elements with high spatial resolution and stability or, alternatively, fast switch ability will be discussed. Photo-active and voltage tunable polarization and diffraction elements are presented. For active micro-optic application a photo-addressed patterned retarder was created. Electrically switchable diffraction gratings were generated by interference exposure of photo-curable LC composites at room temperature characterized by droplet free morphology. These polarization sensitive diffraction elements are characterized be excellent optical properties and low switching times.
The optical microscopy images of an emulsion are commonly distorted when viewed between a cover glass and a planar microscopy slide. An alternative method is to place the sample on a slide with a cavity, which in turn suffers from incomplete information for high internal phase ratio (HIPR) emulsions, due to the inevitable crowding of the drops. This problem is particularly acute for more complex emulsions, such as those with Janus drops, for which a detailed image of the drop is essential. A number of publications have recently described Janus emulsions prepared by a one-step high energy emulsification process with microscopy images obtained by the sample between a planar slide and a cover glass. The correlation to the morphology of emulsions in bulk of these images is critical, but, so far, a potential equivalence has not been established. Since the images are central in order to understand why Janus emulsions should form under such conditions, the need to ascertain any such association is urgent. With this contribution, we compare images from different microscopy methods to those of gently diluted HIPR emulsions. The results reveal that the images of the emulsion samples between a cover glass and a planar microscope slide actually present a realistic representation of the drop topology in bulk emulsions.
N-Allyl-N-homoallylamines were converted in one step into cyclic enamides via a ruthenium-catalyzed assisted tandem catalytic ring-closing metathesis-isomerization sequence. The sequence relies on the in situ transformation of a metathesis active Ru-carbene into an isomerization active Ru-hydride by addition of hydroxide as a chemical trigger.
The new N-heterocyclic carbene (NHC) complex [PdCl2{(CN)(2)IMes}(PPh3)] (2) ({(CN)(2)IMes}: 4,5-dicyano-1,3-dimesitylimidazol-2-ylidene) and the NHC palladacycle [PdCl(dmba){(CN)(2)IMes}] (3) (dmba: N,N-dimethylbenzylamine) have been synthesized by thermolysis of 4,5-dicyano-1,3-dimesityl-2-(pentafluorophenyl) imidazoline (1) in the presence of suitable palladium(II) precursors. The acyclic complex 2 was formed by ligand exchange using the mononuclear precursor [PdCl2(PPh3)(2)] and the palladacycle 3 was formed by cleavage of the dinuclear chloro-bridged precursor [Pd(mu-Cl)(dmba)](2). The new NHC precursor 1-benzyl-4,5-dicyano-2-(pentafluorophenyl)-3-picolylimidazoline (5) was formed by condensation of pentafluorobenzaldehyde with N-benzyl-N'-picolyldiaminomaleonitrile (4). The NHC palladacycle [PdCl2{(CN)(2)IBzPic}] (6) ({(CN)(2)IBzPic}: 1-benzyl-4,5-dicyano-3-picolylimidazol-2-ylidene) was prepared by in situ thermolysis of 5 in the presence of [PdCl2(PhCN)(2)]. The three palladium(II) complexes were characterized by NMR and IR spectroscopy, mass spectrometry and elemental analysis. In addition, the molecular structures of 2 and 3 were determined by X-ray diffraction. The pi-acidity of (CN)(2)IBzPic was compared with (CN)(2)IMes and perviously reported pi-acidic imidazol-2-ylidenes by NBO analysis. The Mizoroki-Heck (MH) reactions of various aryl halides with n-butyl acrylate were performed in the presence of complexes 2, 3 and 6. The new precatalysts showed high activity in the MH reactions giving good-to-excellent product yields with 0.1 mol-% pre-catalyst. The nature of the catalytically active species of 2, 3 and 6 was investigated by poisoning experiments with mercury and transmission electron microscopy. It was found that palladium nanoparticles formed from the precatalysts were involved in the catalytic process.
Thirty six novel ionic liquids (ILs) with 1-butyl-3-methylimidazolium and 3-methyl-1-octylimidazolium cations paired with 2-substitited 4,5-dicyanoimidazolate anions (substituent at C2=chloro, bromo, methoxy, vinyl, amino, methyl, ethyl, propyl, isopropyl, butyl, pentyl, hexyl, heptyl, octyl, nonyl, decyl, undecyl and phenyl) have been synthesized and characterized by using differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and single-crystal X-ray crystallography. The effects of cation and anion type and structure on the thermal properties of the resulting ionic liquids, including several room temperature ionic liquids (RTILs) are examined and discussed. ILs exhibited large liquid and crystallization ranges and formed glasses on cooling with glass transition temperatures in the range of -22 to -68 degrees C. The effects of alkyl substituents of the imidazolate anion reflected the crystallization, melting points and thermal decomposition of the ILs. The Coulombic packing force, van der Waals forces and size of the anions can be considered for altering the thermal transitions. Three crystal structures of the ILs were determined and the effects of changes to the cations and anions on the packing of the structure were investigated.
Here, we study the metastable decay of 5'-d(TTGCTT) in the presence of 0-6 alkaline metal ions (Li+, Na+, K+, Rb+) and 0-3 alkaline earth metal ions (Mg2+ and Ca2+), which replace the corresponding number of protons in the oligonucleotide. We find that all ions studied here stabilize the oligonucleotide with respect to simple 3'-C-O backbone cleavage, but at the same time these metal ions promote a central oligonucleotide deletion accompanied by a concomitant recombination of the terminal d(TT) groups. We find that the quenching of the 3'-C-O backbone cleavage is not ion specific, since it is due to the removal of the phosphate protons upon replacement with the respective metal ions. The central nucleotide deletion competes with the 3'-C-O backbone cleavage channels and is thus promoted through the replacement of the exchangeable protons against metal ions. However, with increasing positive charge density of the metal ions the yield of the central nucleotide deletion further increases. We attribute this effect to the necessity of sufficient proximity of the terminal d(TT) group to allow for their recombination on this reaction path. Hence, the formation of a reactive conformer is mediated by the metal ions.
alpha-Al2O3 surfaces are common in both engineered applications and the environment. Much prior work indicates that their properties, e.g., reactivity, polarity, and charge, change dramatically on interaction with water. Perhaps the simplest question that can be asked of alpha-Al2O3/water interaction is how a single water molecule interacts with the most stable alpha-Al2O3 surface: the alpha-Al2O3(0001). Over the last 15 years, a series of theoretical studies have found that water dissociatively adsorbs on alpha-Al2O3(0001) through two channels. However, to our knowledge no experimental evidence of these dissociation pathways has appeared. By combining sample preparation via supersonic molecular beam dosing, sample characterization via coherent, surface specific vibrational spectroscopy and electronic structure theory, we report the first experimental observation of reaction products of each, theoretically predicted, dissociation channel. These results thus overcome a 15 year old experiment/theory disconnect and make possible a variety of intriguing experiments that promise to provide significant new insights into water/Al2O3 and water/oxide interaction more generally.
Ligands incorporating a tetraazamacrocycle receptor, a 'click'-derived triazole and a 1,8-naphthalimide fluorophore have proven utility as probes for metal ions. Three new cyclam-based molecular probes are reported, in which a piperidinyl group has been introduced at the 4-position of the naphthalimide fluorophore. These compounds have been synthesized using the copper(I)-catalyzed azide-alkyne Huisgen cycloaddition and their photophysical properties studied in detail. The alkylamino group induces the expected red-shift in absorption and emission spectra relative to the simple naphthalimide derivatives and gives rise to extended fluorescence lifetimes in aqueous buffer. The photophysical properties of these systems are shown to be highly solvent-dependent. Screening the fluorescence responses of the new conjugates to a wide variety of metal ions reveals significant and selective fluorescence quenching in the presence of copper(II), yet no fluorescence enhancement with zinc(II) as observed previously for the simple naphthalimide derivatives. Reasons for this different behaviour are proposed. Cytotoxicity testing shows that these new cyclam-triazole-dye conjugates display little or no toxicity against either DLD-1 colon carcinoma cells or MDA-MB-231 breast carcinoma cells, suggesting a potential role for these and related systems in biological sensing applications.
Polyelectrolytes in dilute solutions (0.01 mmol/L) adsorb in a two-dimensional lamellar phase to oppositely charged lipid monolayers at the air/water interface. The interchain separation is monitored by Grazing Incidence X-ray Diffraction. On monolayer compression, the interchain separation decreases to a factor of two. To investigate the influence of the electrostatic interaction, either the line charge density of the polymer is reduced (a statistic copolymer with 90% and 50% charged monomers) or mixtures between charged and uncharged lipids are used (dipalmitoylphosphatidylcholine (DPPC)/dioctadecyldimethylammonium bromide (DODAB)) On decrease of the surface charge density, the interchain separation increases, while on decrease of the linear charge density, the interchain separation decreases. The ratio between charged monomers and charged lipid molecules is fairly constant; it decreases up to 30% when the lipids are in the fluid phase. With decreasing surface charge or linear charge density, the correlation length of the lamellar order decreases.
Conformational behavior of the first cyclic organosilicon vinylsulfide, 4,4-dimethyl-3,4-dihydro-2H-1,4-thiasiline as well as its monoheterocyclic analogs, 3,4-dihydro-2H-pyran, 3,4-dihydro-2H-thiopyran, and 1,1-dimethyl-1,2,3,4-tetrahydrosiline is studied in comparison with the carbocyclic analog, cyclohexene, using the methods of low-temperature NMR spectroscopy and theoretical calculations at the DFT and MP2 levels of theory. The barrier to the ring inversion with respect to that in cycloxene is increased in 3,4-dihydro-2H-pyran and 1,1-dimethyl-1,2,3,4-tetrahydrosiline, but, in contrast to the suggestions made in the literature, is decreased in 3,4-dihydro-2H-thiopyran. In 4,4-dimethyl-3,4-dihydro-2H-1,4-thiasiline the barrier is intermediate between those in the corresponding monoheterocycles, 1,1-dimethyl-1,2,3,4-tetrahydrosiline and 3,4-dihydro-2H-thiopyran. The observed variations are rationalized from the viewpoint of the interaction of the pi-electrons of the C=C double bond with the orbitals of heteroatoms in the ring. The structure of the transition state for the ring inversion is discussed.
Tetraphenylethene (TPE) shows a significant increase of fluorescence intensity when the rotational freedom of its phenyl groups is restricted. This special property allows the use of TPE in sensor applications, which have been previously described for the liquid phase only. However, some applications utilising arrays require the immobilisation of TPE dyes on solid surfaces. In this work, we synthesised and investigated the fluorescence behaviour of TPE derivatives on silica particles and quartz slides and suggest ways to employ the dye's properties in solid phase biosensor applications. 2014 Published by Elsevier B.V.
The efficiency of dye-sensitized solar cells (DSCs) depends critically on the electronic structure of the interfaces in the active region. We employ recently developed dispersion-inclusive density functional theory (DFT) and GW methods to study the electronic structure of TiO2 clusters sensitized with catechol molecules. We show that the energy level alignment at the dye-TiO2 interface is the result of an intricate interplay of quantum size effects and dynamic screening effects and that it may be manipulated by nanostructuring and functionalizing the TiO2. We demonstrate that the energy difference between the catechol LUMO and the TiO2 LUMO, which is associated with the injection loss in DSCs, may be reduced significantly by reducing the dimensions of nanostructured TiO2 and by functionalizing the TiO2 with wide-gap moieties, which contribute additional screening but do not interact strongly with the frontier orbitals of the TiO2 and the dye. Precise control of the electronic structure may be achieved via "interface engineering" in functional nanostructures.
1,5-Hexadiene reacts with trifluoromethanesulfonamide in the oxidative system (t-BuOCl+Nal) to give trans-2,5-bis(iodomethyl)-1-(trifluoromethylsulfonyl)pyrrolidine 5 and 3,8-bis(trifluoromethylsulfonyl)-3,8-diazabicyclo[3.2.1]octane 6. With arenesulfonamides ArSO2NH2 (Ar=Ph, Tol), the reaction stops at the formation of the trans and cis isomers of 2,5-bis(iodomethyl)-1-(arenesulfonyl)pyrrolidine 7 and 8 (1:1). The cis isomers of 7 and 8 do not undergo cyclization to the corresponding 3,8-disubstituted 3,8-diazabicyclo[3.2.1]octanes. The reaction with triflamide represents the first example of one-pot two-step route to 3,8-diazabicyclo[3.2.1]octane system. (C) 2014 Elsevier Ltd. All rights reserved.
On Earth, chemolithoautothrophic and anaerobic microorganisms such as methanogenic archaea are regarded as model organisms for possible subsurface life on Mars. For this reason, the methanogenic strain Methanosarcina soligelidi (formerly called Methanosarcina spec. SMA-21), isolated from permafrost-affected soil in northeast Siberia, has been tested under Martian thermo-physical conditions. In previous studies under simulated Martian conditions, high survival rates of these microorganisms were observed. In our study we present a method to measure methane production as a first attempt to study metabolic activity of methanogenic archaea during simulated conditions approaching conditions of Mars-like environments. To determine methanogenic activity, a measurement technique which is capable to measure the produced methane concentration with high precision and with high temporal resolution is needed. Although there are several methods to detect methane, only a few fulfill all the needed requirements to work within simulated extraterrestrial environments. We have chosen laser spectroscopy, which is a non-destructive technique that measures the methane concentration without sample taking and also can be run continuously. In our simulation, we detected methane production at temperatures down to -5 degrees C, which would be found on Mars either temporarily in the shallow subsurface or continually in the deep subsurface. The pressure of 50 kPa which we used in our experiments, corresponds to the expected pressure in the Martian near subsurface. Our new device proved to be fully functional and the results indicate that the possible existence of methanogenic archaea in Martian subsurface habitats cannot be ruled out. (C) 2013 Published by Elsevier Ltd.
Thermoresponsive block copolymers comprising long, hydrophilic, nonionic poly(methoxy diethylene glycol acrylate) (PMDEGA) blocks and short hydrophobic polystyrene (PS) blocks are investigated in aqueous solution. Various architectures, namely diblock, triblock, and starblock copolymers are studied as well as a PMDEGA homopolymer as reference, over a wide concentration range. For specific characterization methods, polymers were labeled, either by partial deuteration (for neutron scattering studies) or by fluorophores. Using fluorescence correlation spectroscopy, critical micellization concentrations are identified and the hydrodynamic radii of the micelles, r (h) (mic) , are determined. Using dynamic light scattering, the behavior of r (h) (mic) in dependence on temperature and the cloud points are measured. Small-angle neutron scattering enabled the detailed structural investigation of the micelles and their aggregates below and above the cloud point. Viscosity measurements are carried out to determine the activation energies in dependence on the molecular architecture. Differential scanning calorimetry at high polymer concentration reveals the glass transition of the polymers, the fraction of uncrystallized water and effects of the phase transition at the cloud point. Dielectric relaxation spectroscopy shows that the polarization changes reversibly at the cloud point, which reflects the formation of large aggregates upon heating through the cloud point and their redissolution upon cooling.
High-throughput assays for drug screening applications have to fulfill particular specifications. Besides the capability to identify even compounds with low potency, one of the major issues is to minimize the number of false-positive hits in a screening campaign in order to reduce the logistic effort for the subsequent cherry picking and confirmation procedure. In this respect, fluorescence lifetime (FLT) appears as an ideal readout parameter that is supposed to be robust against autofluorescent and light-absorbing compounds, the most common source of systematic false positives. The extraordinary fluorescence features of the recently discovered [1,3]dioxolo[4,5-f][1,3]benzodioxole dyes were exploited to develop an FLT-based binding assay with exceptionally robust readout. The assay setup was comprehensively validated and shown to comply not only with all requirements for a powerful high-throughput screening assay but also to be suitable to determine accurate binding constants for inhibitors against enzymes of the histone deacetylase family. Using the described binding assay, the first inhibitors against three members of this enzyme family from Pseudomonas aeruginosa were identified. The compounds were characterized in terms of potency and selectivity profile. The novel ligand probe should also be applicable to other homologues of the histone deacetylase family that are inhibited by N-hydroxy-N'-phenyloctandiamide.
Restricted rotation about the N-S partial double bonds in a bis-N-triflyl substituted 3,8-diazabicyclo[3.2.1]octane derivative 1 has been frozen at low temperature (Delta G* = 11.6 kcal mol(-1)), and the existence of all four rotamers about the two N-S bonds, 3-in, 8-in, 3-in, 8-out, 3-out, 8-in, and 3-out, 8-out, respectively, proved experimentally by NMR spectroscopy and theoretically by DFT and MP2 calculations. Copyright (C) 2014 John Wiley & Sons, Ltd.
Formation of a Eu(III) borate solid species from a weak Eu(III) borate complex in aqueous solution
(2014)
In the presence of polyborates (detected by B-11-NMR) the formation of a weak Eu(III) borate complex (lg beta(11) similar to 2, estimated) was observed by time-resolved laser-induced fluorescence spectroscopy (TRLFS). This complex is a precursor for the formation of a solid Eu(III) borate species. The formation of this solid in solution was investigated by TRLFS as a function of the total boron concentration: the lower the total boron concentration, the slower is the solid formation. The solid Eu(III) borate was characterized by IR spectroscopy, powder XRD and solid-state TRLFS. The determination of the europium to boron ratio portends the existence of pentaborate units in the amorphous solid.
For a comprehensive understanding of cellular processes and potential dysfunctions therein, an analysis of the ubiquitous intracellular second messenger calcium is of particular interest. This study examined the suitability of the novel Ca2+-sensitive fluorescent dyes Asante Calcium Red (ACR) and Asante Calcium Green (ACG) for two-photon (2P)-excited time-resolved fluorescence measurements. Both dyes displayed sufficient 2P fluorescence excitation in a range of 720-900 nm. In vitro, ACR and ACG exhibited a biexponential fluorescence decay behavior and the two decay time components in the ns-range could be attributed to the Ca2+-free and Ca2+-bound dye species. The amplitude-weighted average fluorescence decay time changed in a Ca2+-dependent way, unraveling in vitro dissociation constants K-D of 114 nM and 15 nM for ACR and ACG, respectively. In the presence of bovine serum albumin, the absorption and steady-state fluorescence behavior of ACR was altered and its biexponential fluorescence decay showed about 5-times longer decay time components indicating dye-protein interactions. Since no ester derivative of ACG was commercially available, only ACR was evaluated for 2P-excited fluorescence lifetime imaging microscopy (2P-FLIM) in living cells of American cockroach salivary glands. In living cells, ACR also exhibited a biexponential fluorescence decay with clearly resolvable short (0.56 ns) and long (2.44 ns) decay time components attributable to the Ca2+-free and Ca2+-bound ACR species. From the amplitude-weighted average fluorescence decay times, an in situ K-D of 180 nM was determined. Thus, quantitative [Ca2+](i) recordings were realized, unraveling a reversible dopamine-induced [Ca2+](i) elevation from 21 nM to 590 nM in salivary duct cells. It was concluded that ACR is a promising new Ca2+ indicator dye for 2P-FLIM recordings applicable in diverse biological systems.
Motivated by recent atomic manipulation experiments, we report quantum chemical calculations for chemi- and physisorption minima of chlorobenzene on the Si(111)-7x7 surface. A density functional theory cluster approach is applied, using the B3LYP hybrid functional alongside Grimme's empirical dispersion corrections (D3). We were able to identify chemisorption sites of binding energies of 1.6 eV and physisorption energies of 0.6 eV, both in encouraging agreement with the trend of experimental data. The cluster approach opens up the possibility of a first-principles based dynamical description of STM manipulation experiments on this system, the interpretation of which involves both the chemi- and physisorbed states. However, we found that special care has to be taken regarding the choice of clusters, basis sets, and the evaluation of the dispersion corrections.
Phytochemical investigation of the dichloromethane/methanol (1:1) extract of the roots of Bulbine frutescens led to the isolation of a new xanthone, 8-hydroxy-6-methylxanthone-1-carboxylic acid (1) and a new phenylanthraquinone, 6',8-O-dimethylknipholone (2) along with six known compounds. The structures were elucidated on the basis of NMR and MS spectral data analyses. The structure of compound 1 was confirmed through X-ray crystallography which was then used as a reference to propose the revision of the structures of six seco-anthraquinones into xanthones. The isolated compounds were evaluated for cytotoxicity against human cervix carcinoma KB-3-1 cells with the phenylanthraquinone knipholone being the most active (IC50 = 0.43 mu M). Two semi-synthetic knipholone derivatives, knipholone Mannich base and knipholone-1,3-oxazine, were prepared and tested for cytotoxic activity; both showed moderate activities (IC50 value of 1.89 and 2.50 mu M, respectively). (C) 2014 Phytochemical Society of Europe. Published by Elsevier B.V. All rights reserved.
In this paper the concept of a compact high-resolution spectrometer based on the combination of dispersive and interferometric elements is presented. Dispersive elements are used to spectrally resolve the light in one direction with coarse resolution (Delta lambda < 0.5 nm), while perpendicular to that direction an etalon provides high spectral resolution (Delta lambda < 50 pm). This concept for two-dimensional spectroscopy has been implemented for the wavelength range lambda = 350-650 nm. Appropriate algorithms for reconstructing spectra from the two-dimensional raw data and for wavelength calibration were established in an analysis software. Potential applications for this new spectrometer are Raman and laser-induced breakdown spectroscopy (LIBS). Resolutions down to 28 pm (routinely 54 pm) could be realized for these applications.
A vegetable oil (VO) was added to an emulsion of silicone oil in water (SO/W) with mixing limited to once turning the test tube upside down. Initially, the VO was dispersed into virtually centimeter-sized drops and the emulsion contained effectively no Janus drops, while after 1 h of agitation at a low level to prevent creaming, drops of 50-100-mu m size of the two oils were observed: in addition to an insignificant number of Janus drops. The topology of the latter showed them to emanate from flocculated individual drops of the two oils, but with no discernible effect by the interfacial tension equilibrium on the drop topology. Continued gentle mixing gave increasing fraction of Janus drops of increased size with a topology gradually approaching the one expected from the interfacial equilibrium at the contact line. The spontaneous formation of Janus drops indicated a reduction of the interfacial free energy in the process and the interfacial energy difference between separate and Janus drops was calculated for an appropriate range of interfacial tensions and for all oil fractions. The calculations enabled a distinction of the decrease due to interfacial area changes from the reduction of interfacial tensions per se, with the latter only a minor fraction.
For the first time tubulating properties of spherical dendritic glycopolymers and linear alternating polyampholytes against non-uniform negatively charged giant vesicles are proven by light microscopy and cryo-scanning electron microscopy study. Real time observation of the morphological transformation from giant vesicles to tubular structures, simulating morphogenesis in living cells, is given by using the cationic and H-bond active dendritic glycopolymer accompanied by reducing the size of the giant vesicles and the evidence of vesicle-vesicle interaction which was only postulated in a previous study. Similar morphogenesis of non-uniform giant vesicles into tubular network structure can be observed by using a polyampholyte in the stretched conformation at pH 9. Pearl necklace and tubular network structure formation are also observed by applying anionic vesicles of significant smaller dimensions with average size dimensions of 35 nm, after adding the polyampholyte at pH 9. However, the fitting accuracy between the functional groups along the backbone chain of the polyampholyte on one side and the vesicle surface on the other side is of high importance for the transformation process by using polyampholytes. The resulting tubular and network structures offer new fields of application as microfluidic transport channels or template phases for the shape controlled formation of nanoparticles. (C) 2014 Elsevier B.V. All rights reserved.
We present a new global ground state potential energy surface (PES) for carbon monoxide at a coverage of 1/4, on a rigid Ru(0001) surface [Ru(0001)(2x2):CO]. All six adsorbate degrees of freedom are considered. For constructing the PES, we make use of more than 90 000 points calculated with periodic density functional theory using the RPBE exchange-correlation functional and an empirical van der Waals correction. These points are used for interpolation, utilizing a symmetry-adapted corrugation reducing procedure (CRP). Three different interpolation schemes with increasing accuracy have been realized, giving rise to three flavours of the CRP PES. The CRP PES yields in agreement with the DFT reference and experiments, the atop position of CO to be the most stable adsorption geometry, for the most accurate interpolation with an adsorption energy of 1.69 eV. The CRP PES shows that diffusion parallel to the surface is hindered by a barrier of 430 meV, and that dissociation is facilitated but still activated. As a first "real" application and further test of the new potential, the six-dimensional vibrational Schrodinger equation is solved variationally to arrive at fully coupled, anharmonic frequencies and vibrational wavefunctions for the vibrating, adsorbed CO molecule. Good agreement with experiment is found also here. Being analytical, the new PES opens an efficient way towards multidimensional dynamics. (C) 2014 AIP Publishing LLC.
Cellulose/calcium phosphate hybrid materials were synthesized via an ionic liquid-assisted route. Scanning electron microscopy, transmission electron microscopy, energy-dispersive X-ray spectroscopy, X-ray diffraction, infrared spectroscopy, and thermogravimetric analysis/differential thermal analysis show that, depending on the reaction conditions, cellulose/hydroxyapatite, cellulose/ chlorapatite, or cellulose/monetite composites form. Preliminary studies with MC3T3-E1 pre-osteoblasts show that the cells proliferate on the hybrid materials suggesting that the ionic liquid-based process yields materials that are potentially useful as scaffolds for regenerative therapies.
Structures, C-13 chemical shifts, and the occupation quotients of anti-bonding pi* and bonding pi orbitals of the C C triple bond along a series of push-pull alkynes (p)X-C6H4 C(O)-C C-NH-C6H4-Y(P) (X,Y= H, Me, OMe, NMe2, NO2, COMe, COOMe, F, Cl, Br) were computed at the DFT level (B3LYP/6-311G**) of theory. Both the stereochemistry (cis/trans-isomers) by steric twist and the push-pull character by both C-13 chemical shift differences (Delta delta(C C)) and the occupation quotient (pi(C C)/pi(C C)) were studied; the latter two parameters can be readily employed to precisely quantify the push-pull effect in alkynes. (C) 2014 Elsevier B.V. All rights reserved.
In many technical materials and commercial products like sunscreen or paint high particle and absorber concentrations are present. An important parameter for slabs of these materials is the diffuse transmission of light, which quantifies the total amount of directly and diffusely transmitted light. Due to the high content of scattering particles not only multiple scattering but also additional dependent scattering occurs. Hence, simple analytical models cannot be applied to calculate the diffuse transmission. In this work a Monte-Carlo program for the calculation of the diffuse transmission of light through dispersions in slab-like geometry containing high concentrations of scattering particles and absorbers is presented and discussed in detail. Mie theory is applied for the calculation of the scattering properties of the samples. Additionally, dependent scattering is considered in two different models, the well-known hard sphere model in the Percus-Yevick approximation (HSPYA) and the Yukawa model in the Mean Spherical Approximation (YMSA). Comparative experiments will show the accurateness of the program as well as its applicability to real samples [1]. (C) 2014 Elsevier Ltd. All rights reserved.
New sulphoxide modified resins were synthesized using poly(styrene-co-divinylbenzene) (PS-DVB) as matrix. Infrared spectroscopy and elemental analysis were used for characterisation. Solid-phase extraction of Pt-IV, Ru-III and Ru-IV from acidic chloride solutions was performed via batch experiments. Influence of spacer length between sulphoxide and matrix (ethylene, hexamethylene), substitution of sulphoxide (R-1: ethyl, hexyl, phenyl) and bead size of PS-DVB (spherical beads: d(50) < 155 mu m, d(50) < 80 mu m; powder: d(50) < 30 mu m) on adsorption was investigated subjected to acidity. Experimental results showed that ethyl substituted sulphoxide immobilised onto ground PS-DVB and hexamethylene spacer exhibited best adsorption properties. Different kinetic models and isotherms were fitted to the experimental data to identify extraction mechanism. Pt-IV was quantitative sorbed at [HCl] <= 0.1 mol/L whereas Ru-III and Ru-IV sorption ranged between 90% and 95% at [HCl] 5 mol/L. Desorption was reached using a solution of 0.5 M thiourea (Tu) in 0.1 M HCl at 90 degrees C. Separation of Pt-IV and Rum occurred at [HCl] <= 0.1 mol/L whereas Pt-IV was extracted and Ru-III remained in solution. A further separation was achieved by extracting Pt-IV and Ru-IV at 5 M HCl followed by sequential elution of Pt-IV with concentrated HCl and Ru-IV with 0.5 M Tu in 0.1 M HCl at 90 degrees C. 2014 Elsevier B.V. All rights reserved.
Phytochemical investigations of Mammea usambarensis resulted into the isolation a delta-tocotrienol (1) and five known mammea-type coumarins (2-6). Their structures were determined by NMR, IR, and LC-MS spectroscopic methods and by comparison of their spectral and physical data with those reported previously in the literature. The presence of these compounds is consistent with the compound classes reported from other members of the genus Mammal. Compound 6 is isolated from the Mammea genus for the first time. This is the new source of mammea-type coumarin compounds while the chemotaxonomic significance of this investigation is summarized. (C) 2014 Elsevier Ltd. All rights reserved.
Nanobioconjugates have been synthesized using cadmium selenide quantum dots (QDs), europium complexes (EuCs), and biotin. In those conjugates, long-lived photoluminescence (PL) is provided by the europium complexes, which efficiently transfer energy via Forster resonance energy transfer (FRET) to the QDs in close spatial proximity. As a result, the conjugates have a PL emission spectrum characteristic for QDs combined with the long PL decay time characteristic for EuCs. The nanobioconjugates synthesis strategy and photo-physical properties are described as well as their performance in a time-resolved streptavidin-biotin PL assay. In order to prepare the QD-EuC-biotin conjugates, first an amphiphilic polymer has been functionalized with the EuC and biotin. Then, the polymer has been brought onto the surface of the QDs (either QD655 or QD705) to provide functionality and to make the QDs water dispersible. Due to a short distance between EuC and QD, an efficient FRET can be observed. Additionally, the QD-EuC-biotin conjugates' functionality has been demonstrated in a PL assay yielding good signal discrimination, both from autofluorescence and directly excited QDs. These newly designed QD-EuC-biotin conjugates expand the class of highly sensitive tools for bioanalytical optical detection methods for diagnostic and imaging applications. (C) 2014 Society of Photo-Optical Instrumentation Engineers (SPIE)
Site-selective emission spectra of Eu3+-doped CeO2 nanoparticles up to the D-5(0) - F-7(5) transition were recorded under cryogenic conditions to identify the local structure around the Eu3+ dopants in ceria. It is found that pretreatment conditions are crucial for the redistribution of dopants from a broad variety of environments to six well-defined lattice sites. The influence of the dopant and the host structure on the catalytic activity was investigated. A relationship between structure and reactivity is discussed. It is shown that oxygen transport is most efficient in particles with a pronounced amorphous character.
We investigate the cononsolvency effect of poly(N-isopropylacrylamide) (PNIPAM) in mixtures of water and methanol. Two systems are studied: micellar solutions of polystyrene-b-poly(N-isopropylacrylamide) (PS-b-PNIPAM) diblock copolymers and, as a reference, solutions of PNIPAM homopolymers, both at a concentration of 20 mg/mL in DO. Using a stopped-flow instrument, fully deuterated methanol was rapidly added to these solutions at volume fractions between 10 and 20%. Time-resolved turbidimetry revealed aggregate formation within 10-100 s. The structural changes on mesoscopic length scales were followed by time-resolved small-angle neutron scattering (TR-SANS) with a time resolution of 0.1 s. In both systems, the pathway of the aggregation depends on the content of deuterated methanol; however, it is fundamentally different for homopolymer and diblock copolymer solutions: In the former, very large aggregates (>150 nm) are formed within the dead time of the setup, gradient appears at their surface in the late stages. In contrast, the growth of the aggregates in the latter system features different regimes, and the final aggregate size is 50 nm, thus much smaller than for the homopolymer. For the diblock copolymer, the time dependence of the aggregate radius can be described by two models: In the initial stage, the diffusion-limited coalescence model describes the data well; however, the resulting coalescence time is unreasonably high. In the late stage, a logarithmic coalescence model based on an energy barrier which is proportional to the aggregate radius is successfully applied. and a concentration
Three new copper(II) 4-nitrobenzoato coordination compounds (4-NO(2)bz(-) = 4-nitrobenzoate anions) with N-methylnicotinamide (mna) [Cu(4-NO(2)bz)(2)(mna)(2)(H2O)] (1), [Cu(4-NO(2)bz)(2)(mu-mna)(H2O)](2) (2) and [Cu(mu-4-NO(2)bz)(2)(mna)](2) (3) were synthesized and characterized. Due to a comparison, additional two related compounds [Cu(3,5-(NO2)(2)bz)(2)(mna)(2)(H2O)] (4) (nia = nicotinamide, 3,5-(NO2)(2)bz(-) = 3,5-dinitrobenzoate anions) and [Cu(mu-2-NO(2)bz)(2)(mna)](2) (5) (2-NO(2)bz(-) = 2-nitrobenzoate anions) were isolated. The mononuclear compounds with mna 1 and nia 4 show CuO2N2O chromophores with the water molecule placed at the apex of the square pyramid. The square-pyramidal coordination sphere CuO3NO in 2 differs to CuO2N2O in 1 and 4. Differently, the water molecule is in 2 at the basal-plane, while two mna molecules serve also as bridges via N-py and 0-amido enabling a dinuclear molecular structure 1, 2 and 4 are paramagnetic though a dinuclear structure is seen in 2, while a clear-cut strong antiferromagnetic (AFM) coupling (2J -300 cm(-1)) is found for the compounds 3 and 5. (C) 2014 Elsevier Ltd. All rights reserved.
It is proposed that xanthophylls, and carotenoids in general, may assist in energy transfer from the chlorophyll Soret band to the Q band. Ground-state (1A(g)) and excited-state (1B(u)) optimizations of violaxanthin (Vx) and zeaxanthin (Zx) are performed in an environment mimicking the light-harvesting complex II (LHCII), including the closest chlorophyll b molecule (Chl). Time-dependent density functional theory (TD-DFT, CAM-B3LYP functional) is used in combination with a semi-empirical description to obtain the excited-state geometries, supported by additional DFT/multireference configuration interaction calculations, with and without point charges representing LHCII. In the ground state, Vx and Zx show similar properties. At the 1B(u) minimum, the energy of the Zx 1Bu state is below the Chl Q band, in contrast to Vx. Both Vx and Zx may act as acceptors of Soret-state energy; transfer to the Q band seems to be favored for Vx. These findings suggest that carotenoids may generally mediate Soret-to-Q energy flow in LHCII.
We report on the fabrication of a complex electrode architecture for efficient direct bioelectrocatalysis. In the developed procedure, the redox enzyme pyrroloquinoline quinone-dependent glucose dehydrogenase entrapped in a sulfonated polyaniline [poly(2-methoxyaniline-5-sulfonic acid)-co-aniline] was immobilized on macroporous indium tin oxide (macroITO) electrodes. The use of the 3D-conducting scaffold with a large surface area in combination with the conductive polymer enables immobilization of large amounts of enzyme and its efficient communication with the electrode, leading to enhanced direct bioelectrocatalysis. In the presence of glucose, the fabricated bioelectrodes show an exceptionally high direct bioelectrocatalytical response without any additional mediator. The catalytic current is increased more than 200-fold compared to planar ITO electrodes. Together with a high long-term stability (the current response is maintained for >90% of the initial value even after 2 weeks of storage), the transparent 3D macroITO structure with a conductive polymer represents a valuable basis for the construction of highly efficient bioelectronic units, which are useful as indicators for processes liberating glucose and allowing optical and electrochemical transduction.
Thiol-X chemistry has proven to be a valuable toolbox for modification of peptides, proteins, monomers, and polymers. Recently, this has become especially true for the modification of polypeptides (monomers or polymers), which has resulted in a plethora of novel polymers and materials. With this in mind, this highlight focuses on the recent literature concerning the modification of polypeptides by the use of thiol-X chemistry, in particular to synthetic polypeptides either at the monomer or polymer stage modified by thiol-ene, -Michael addition, and -yne chemistries. (C) 2014 Published by Elsevier Ltd.
Polyester networks can be prepared by ultraviolet (UV)-light-induced radical polymerization of methacrylate functionalized oligo(epsilon-caprolactone)s. The properties and functions of the obtained materials depend on defined network structures and may be altered, if crosslinking would occur by side reactions in other positions than the methacrylate endgroups. In order to explore whether and to which extent such side reactions occur, network synthesis as well as related model reactions were performed in the absence of photoinitiator. Hereby precursor structures (linear and four-arm star-shaped) and reaction conditions (in solution and in the melt) were varied. Unspecific side reactions were found only upon extensive UV irradiation for 60min (26 mW cm(-2)) with minor but detectable alterations of physicochemical properties of the networks. The analysis of model reactions suggested minor photolytic cleavage of ester bonds during polymer network synthesis. However, the effect of these side reactions on network properties and functions appeared to be less relevant than an incomplete precursor integration because of a too short UV irradiation for crosslinking. Copyright (c) 2014 John Wiley & Sons, Ltd.
Dispersion engineered silicon nitride waveguides by geometrical and refractive-index optimization
(2014)
Dispersion engineering in silicon nitride (SiXNY) waveguides is investigated through the optimization of the waveguide transversal dimensions and refractive indices in a multicladding arrangement. Ultraflat dispersion of -84.0 +/- 0.5 ps/nm/km between 1700 and 2440 nm and 1.5 +/- 3 ps/nm/km between 1670 and 2500 nm is numerically demonstrated. It is shown that typical refractive index fluctuations as well as dimension fluctuations during fabrication of the SiXNY waveguides are a limitation for obtaining ultraflat dispersion profiles. Single- and multicladding waveguides are fabricated and their dispersion profiles measured (over nearly 1000 nm) using a low-coherence frequency domain interferometric technique. By appropriate thickness optimization, the zero-dispersion wavelength is tuned over a large spectral range in single-and multicladding waveguides with small refractive index contrast (3%). A flat dispersion profile with +/- 3.2 ps/nm/km variation over 500 nm is obtained in a multicladding waveguide fabricated with a refractive index contrast of 37%. Finally, we generate a nearly three-octave supercontinuum in this dispersion flattened multicladding SiXNY waveguide. (C) 2014 Optical Society of America
Poly(ethylene oxide) (PEO) has long been used as an additive in toothpaste, partly because it reduces biofilm formation on teeth. It does not, however, reduce the formation of dental calculus or support the remineralization of dental enamel or dentine. The present article describes the synthesis of new block copolymers on the basis of PEO and poly(3-sulfopropyl methacrylate) blocks using atom transfer radical polymerization. The polymers have very large molecular weights (over 10(6) g/mol) and are highly water-soluble. They delay the precipitation of calcium phosphate from aqueous solution but, upon precipitation, lead to relatively monodisperse hydroxyapatite (HAP) spheres. Moreover, the polymers inhibit the bacterial colonization of human enamel by Streptococcus gordonii, a pioneer bacterium in oral biofilm formation, in vitro. The formation of well-defined HAP spheres suggests that a polymer-induced liquid precursor phase could be involved in the precipitation process. Moreover, the inhibition of bacterial adhesion suggests that the polymers could be utilized in caries prevention.
New N-p-chloro-, N-p-bromo-, and N-p-nitrophenylazobenzylchitosan derivatives, as well as the corresponding azophenyl and azophenyl-p-sulfonic acids, were synthesized by coupling N-benzylvchitosan with aryl diazonium salts. The synthesized molecules were analyzed by UV-Vis, FT-IR, H-1-NMR and N-15-NMR spectroscopy. The capacity of copper chelation by these materials was studied by AAS. Chitosan and the derivatives were subjected to hydrolysis and the products were analyzed by ESI(+)-MS and GC-MS, confirming the formation of N-benzyl chitosan. Furthermore, the MS results indicate that a nucleophilic aromatic substitution (SnAr) reaction occurs under hydrolysis conditions, yielding chloroaniline from N-p-bromo-, and N-p-nitrophenylazo-benzylchitosan as well as bromoaniline from N-p-chloro-, and N-p-nitrophenylazobenzyl-chitosan.
Industrialized food production is in urgent search for alternative packaging materials, which can serve the requirements of a globalized world in terms of longer product shelf lives, reduced freight weight to decrease transport costs, and better barrier functionality to preserve its freshness. Polymer materials containing organically modified nano clay particles as additives are one example for a new generation of packaging materials with specific barrier functionality to actually hit the market. Clay types used for these applications are aluminosilicates, which belong to the mineral group of phyllosilicates. These consist of nano-scaled thin platelets, which are organically modified with quaternary ammonium compounds acting as spacers between the different clay layers, thereby increasing the hydrophobicity of the mineral additive. A variety of different organically modified clays are already available, and the use as additive for food packaging materials is one important application. To ensure valid risk assessments of emerging nano composite polymers used in the food packaging industry, exact analytical characterization of the organically modified clay within the polymer matrix is of paramount importance. Time-of-flight SIMS in combination with multivariate statistical analysis was used to differentiate modified clay reference materials from another. Time-of-flight SIMS spectra of a reference polymer plate, which contained one specific nano clay composite, were acquired. For each modified clay additive, a set of characteristic diagnostic ions could be identified, which then was used to successfully assign unknown clay additives to the corresponding reference material. Thus, the described methodology could be used to define and characterize nano clay within polymer matrices. Copyright (c) 2014 John Wiley & Sons, Ltd.
Protein-metal interactions-traditionally regarded for roles in metabolic processes-are now known to enhance the performance of certain biogenic materials, influencing properties such as hardness, toughness, adhesion, and self-healing. Design principles elucidated through thorough study of such materials are yielding vital insights for the design of biomimetic metallopolymers with industrial and biomedical applications. Recent advances in the understanding of the biological structure-function relationships are highlighted here with a specific focus on materials such as arthropod biting parts, mussel byssal threads, and sandcastle worm cement.
High fractions of gold nanorods were locally aligned by means of a polymeric liquid crystalline phase. The gold nanorods constituting >80 wt % of the thin organic-inorganic composite films form a network with side-by-side and end-to-end combinations. Organization into these network structures was induced by shearing gold nanorod-LC polymer dispersions via spin-coating. The LC polymer is a polyoxazoline functionalized with pendent cholesteryl and carboxyl side groups enabling the polymer to bind to the CTAB stabilizer layer of the gold nanorods via electrostatic interactions, thus forming the glue between organic and inorganic components, and to form a chiral nematic lyotropic phase. The self-assembled locally oriented gold nanorod structuring enables control over collective optical properties due to plasmon resonance coupling, reminiscent of enhanced optical properties of natural biomaterials.
A series of multiblock copolymers (PDLCL) synthesized from oligo(omega-pentadecalactone) diol (OPDL) and oligo(epsilon-caprolactone) diol (OCL), which are linked by 2,2(4), 4-trimethyl-hexamethylene diisocyanate (TMDI), is investigated by the Langmuir monolayer technique at the air-water interface. Brewster angle microscopy (BAM) and spectroscopic ellipsometry are employed to characterize the polymer film morphologies in situ. PDLCL containing >= 40 wt% OCL segments form homogeneous Langmuir monofilms after spreading. The film elasticity modulus decreases with increasing amounts of OPDL segments in the copolymer. In contrast, the OCL-free polyesterurethane OPDL-TMDI cannot be spread to monomolecular films on the water surface properly, and movable slabs are observed by BAM even at low surface pressures. The results of the in situ morphological characterization clearly show that essential information concerning the reliability of Langmuir monolayer degradation (LMD) experiments cannot be obtained from the evaluation of the pi-A isotherms only. Consequently, in situ morphological characterization turns out to be indispensable for characterization of Langmuir layers before LMD experiments.
The CH2Cl2/MeOH (1: 1) extract of the roots of Tephrosia villosa showed good antiplasmodial activity against the chloroquine-sensitive (D6) and chloroquine-resistant (W2) strains of Plasmodium falciparum with IC50 values of 3.1 +/- 0.4 and 1.3 +/- 0.3 mu g/mL, respectively. Chromatographic separation of the extract yielded a new rotenoid, 6 alpha-hydroxy-alpha-toxicarol, along with five known rotenoids, (rotenone, deguelin, sumatrol, 12 alpha-hydroxy-alpha-toxicarol and villosinol). Similar treatment of the extract of the stem of Tephrosia purpurea (IC50 = 4.1 +/- 0.4 and 1.9 +/- 0.2 mu g/mL against D6 and W2 strains of P. falciparum, respectively) yielded a new flavone having a unique substituent at C-7/C-8 [trivial name (+)-tephrodin], along with the known flavonoids tachrosin, obovatin methyl ether and derrone. The relative configuration and the most stable conformation in (+)-tephrodin was determined by NMR and theoretical energy calculations. The rotenoids and flavones tested showed good to moderate antiplasmodial activities (IC50 = 9 +/- 23 mu M). Whereas the cytotoxicity of rotenoids is known, the flavones (+)-tephrodin and tachrosin did not show significant cytotoxicity (IC50 > 100 mu M;) against mammalian African monkey kidney (vero) and human larynx carcinoma (HEp2) cell lines. (C) 2014 Phytochemical Society of Europe. Published by Elsevier B.V. All rights reserved.
The stem bark extract of Schizozygia coffaeoides (Apocynaceae) showed moderate antiplasmodial activity (IC50 = 8-12 mu g/mL) against the chloroquine-sensitive (D6) and chloroquine-resistant (W2) strains of Plasmodium falciparum. Chromatographic separation of the extract led to the isolation of a new schizozygane indoline alkaloid, named 3-oxo-14 alpha, 15 alpha-epoxyschizozygine. In addition, two dimeric anthraquinones, cassiamin A and cassiamin B, were identified for the first time in the family Apocynaceae. The structures of the isolated compounds were deduced on the basis of spectroscopic evidence. The schizozygane indole alkaloids showed good to moderate antiplasmodial activities (IC50 = 13-52 mu m). (C) 2014 Phytochemical Society of Europe. Published by Elsevier B.V. All rights reserved.
The spatial magnetic properties (Through Space NMR Shieldings-TSNMRS) of a variety of porphyrins, hemiporphyrazines and tetraoxo[8]circulenes have been computed, visualized as Iso-chemical Shielding Surfaces (ICSS) of various size and direction, and were examined subject to the interplay of present (para)-diatropic ring currents [(anti)aromaticity] and influences on the latter property originating from the macrocyclic ring conformation, further annelation and partial to complete hydrogenation of aromatic ring moieties. Caution seems to be indicated when concluding from a single NICS parameter to present (para)diatropic ring currents [(anti)aromaticity]. (C) 2014 Elsevier Ltd. All rights reserved.
Improving the photochemical properties of molecular photoswitches is crucial for the development of light-responsive systems in materials and life sciences. ortho-Fluoroazobenzenes are a new class of rationally designed photochromic azo compounds with optimized properties, such as the ability to isomerize with visible light only, high photoconversions, and unprecedented robust bistable character. Introducing sigma-electron-withdrawing F atoms ortho to the N=N unit leads to both an effective separation of the n -> pi* bands of the E and Z isomers, thus offering the possibility of using these two transitions for selectively inducing E/Z iso-merizations, and greatly enhanced thermal stability of the Z isomers. Additional para-electron-withdrawing groups (EWGs) work in concert with ortho-F atoms, giving rise to enhanced separation of the n -> pi* transitions. A comprehensive study of the effect of substitution on the key photochemical properties of ortho-fluoroazobenzenes is reported herein. In particular, the position, number, and nature of the EWGs have been varied, and the visible light photoconversions, quantum yields of isomerization, and thermal stabilities have been measured and rationalized by DFT calculations.
NMR chemical shift predictions based on empirical methods are nowadays indispensable tools during resonance assignment and 3D structure calculation of proteins. However, owing to the very limited statistical data basis, such methods are still in their infancy in the field of nucleic acids, especially when non-canonical structures and nucleic acid complexes are considered. Here, we present an ab initio approach for predicting proton chemical shifts of arbitrary nucleic acid structures based on state-of-the-art fragment-based quantum chemical calculations. We tested our prediction method on a diverse set of nucleic acid structures including double-stranded DNA, hairpins, DNA/protein complexes and chemically-modified DNA. Overall, our quantum chemical calculations yield highly/very accurate predictions with mean absolute deviations of 0.3-0.6 ppm and correlation coefficients (r(2)) usually above 0.9. This will allow for identifying misassignments and validating 3D structures. Furthermore, our calculations reveal that chemical shifts of protons involved in hydrogen bonding are predicted significantly less accurately. This is in part caused by insufficient inclusion of solvation effects. However, it also points toward shortcomings of current force fields used for structure determination of nucleic acids. Our quantum chemical calculations could therefore provide input for force field optimization.
Using density functional theory and Ab Initio Molecular Dynamics with Electronic Friction (AIMDEF), we study the adsorption and dissipative vibrational dynamics of hydrogen atoms chemisorbed on free-standing lead films of increasing thickness. Lead films are known for their oscillatory behaviour of certain properties with increasing thickness, e.g., energy and electron spill-out change in discontinuous manner, due to quantum size effects [G. Materzanini, P. Saalfrank, and P.J.D. Lindan, Phys. Rev. B 63, 235405 (2001)]. Here, we demonstrate that oscillatory features arise also for hydrogen when chemisorbed on lead films. Besides stationary properties of the adsorbate, we concentrate on finite vibrational lifetimes of H-surface vibrations. As shown by AIMDEF, the damping via vibration-electron hole pair coupling dominates clearly over the vibration-phonon channel, in particular for high-frequency modes. Vibrational relaxation times are a characteristic function of layer thickness due to the oscillating behaviour of the embedding surface electronic density. Implications derived from AIMDEF for frictional many-atom dynamics, and physisorbed species will also be given. (C) 2014 AIP Publishing LLC.
The surface modification of mesoporous silica monoliths through thiol-ene chemistry is reported. First, mesoporous silica monoliths with vinyl, allyl, and thiol groups were synthesized through a sol-gel hydrolysis-poly-condensation reaction from tetramethyl orthosilicate (TMOS) and vinyltriethoxysilane, allyltriethoxysilane, and (3-mercaptopropyl) trimethoxysilane, respectively. By variation of the molar ratio of the comonomers TMOS and functional silane, mesoporous silica objects containing different amounts of vinyl, allyl, and thiol groups were obtained. These intermediates can subsequently be derivatized through radical photoaddition reactions either with a thiol or an olefin, depending on the initial pore wall functionality, to yield silica monoliths with different pore-wall chemistries. Nitrogen sorption, small-angle X-ray scattering, solid-state NMR spectroscopy, elemental analysis, thermogravimetric analysis, and redox titration demonstrate that the synthetic pathway influences the morphology and pore characteristics of the resulting monoliths and also plays a significant role in the efficiency of functionalization. Moreover, the different reactivity of the vinyl and allyl groups on the pore wall affects the addition reaction, and hence, the degree of the pore-wall functionalization. This report demonstrates that thiol-ene photoaddition reactions are a versatile platform for the generation of a large variety of organically modified silica monoliths with different pore surfaces.
The origin of second harmonic generation (SHG) in starch granules was investigated using ab initio quantum mechanical modeling and experimentally examined using polarization-in, polarization-out (PIPO) second harmonic generation microscopy. Ab initio calculations revealed that the largest contribution to the SHG signal from A- and B-type allomorphs of starch originates from the anisotropic organization of hydroxide and hydrogen bonds mediated by aligned water found in the polymers. The hypothesis was experimentally tested by imaging maize starch granules under various hydration and heat treatment conditions that alter the hydrogen bond network. The highest SHG intensity was found in fully hydrated starch granules, and heat treatment diminished the SHG intensity. The PIPO SHG imaging showed that dried starch granules have a much higher nonlinear optical susceptibility component ratio than fully hydrated granules. In contrast, deuterated starch granules showed a smaller susceptibility component ratio demonstrating that SHG is highly sensitive to the organization of the hydroxyl and hydrogen bond network. The polarization SHG imaging results of potato starch granules, representing starch allomorph B, were compared to those of maize starch granules representing allomorph A. The results showed that the amount of aligned water was higher in the maize granules. Nonlinear microscopy of starch granules provides evidence that varying hydration conditions leads to significant changes in the nonlinear susceptibility ratio as well as the SHG intensity, supporting the hypothesis from ab initio calculations that the dominant contribution to SHG is due to the ordered hydroxide and hydrogen bond network.
4-Phenol diazonium salts undergo Pd-catalyzed Heck reactions with various styrenes to 4ï-hydroxy stilbenes. In almost all cases higher yields and fewer side products were observed, compared to the analogous 4-methoxy benzene diazonium salts. In contrast, the reaction fails completely with 2- and 3-phenol diazonium salts. For these substitution patterns the methoxy-substituted derivatives are superior.
Cross metathesis of allyl alcohols: how to suppress and how to promote double bond isomerization
(2014)
Under standard conditions the cross metathesis of allyl alcohols and methyl acrylate is accompanied by the formation of ketones, resulting from uncontrolled and undesired double bond isomerization. By conducting the CM in the presence of phenol, the catalyst loading and the reaction time required for quantiative conversion can be reduced, and isomerization can be suppressed. On the other hand, consecutive isomerization can be deliberately promoted by evaporating excess methyl acrylate after completing cross metathesis and by adding a base or silane as chemical triggers.
With the present theoretical study of the photochemical switching of E-methylfurylfulgide we contribute an important step towards the understanding of the photochemical processes in furylfulgide-related molecules. We have carried out large-scale, full-dimensional direct semiempirical configuration-interaction surface-hopping dynamics of the photoinduced ring-closure reaction. Simulated static and dynamical UV/Vis-spectra show good agreement with experimental data of the same molecule. By a careful investigation of our dynamical data, we were able to identify marked differences to the dynamics of the previously studied E-isopropylfurylfulgide. With our simulations we can not only reproduce the experimentally observed quantum yield differences qualitatively but we can also pinpoint two reasons for them: kinematics and pre-orientation. With our analysis, we thus offer straightforward molecular explanations for the high sensitivity of the photodynamics towards seemingly minor changes in molecular constitution. Beyond the realm of furylfulgides, these insights provide additional guidance to the rational design of photochemically switchable molecules.
We study the diffusion of a tracer particle, which moves in continuum space between a lattice of excluded volume, immobile non-inert obstacles. In particular, we analyse how the strength of the tracer–obstacle interactions and the volume occupancy of the crowders alter the diffusive motion of the tracer. From the details of partitioning of the tracer diffusion modes between trapping states when bound to obstacles and bulk diffusion, we examine the degree of localisation of the tracer in the lattice of crowders. We study the properties of the tracer diffusion in terms of the ensemble and time averaged mean squared displacements, the trapping time distributions, the amplitude variation of the time averaged mean squared displacements, and the non-Gaussianity parameter of the diffusing tracer. We conclude that tracer–obstacle adsorption and binding triggers a transient anomalous diffusion. From a very narrow spread of recorded individual time averaged trajectories we exclude continuous type random walk processes as the underlying physical model of the tracer diffusion in our system. For moderate tracer–crowder attraction the motion is found to be fully ergodic, while at stronger attraction strength a transient disparity between ensemble and time averaged mean squared displacements occurs. We also put our results into perspective with findings from experimental single-particle tracking and simulations of the diffusion of tagged tracers in dense crowded suspensions. Our results have implications for the diffusion, transport, and spreading of chemical components in highly crowded environments inside living cells and other structured liquids.
The looping of polymers such as DNA is a fundamental process in the molecular biology of living cells, whose interior is characterised by a high degree of molecular crowding. We here investigate in detail the looping dynamics of flexible polymer chains in the presence of different degrees of crowding. From the analysis of the looping–unlooping rates and the looping probabilities of the chain ends we show that the presence of small crowders typically slows down the chain dynamics but larger crowders may in fact facilitate the looping. We rationalise these non-trivial and often counterintuitive effects of the crowder size on the looping kinetics in terms of an effective solution viscosity and standard excluded volume. It is shown that for small crowders the effect of an increased viscosity dominates, while for big crowders we argue that confinement effects (caging) prevail. The tradeoff between both trends can thus result in the impediment or facilitation of polymer looping, depending on the crowder size. We also examine how the crowding volume fraction, chain length, and the attraction strength of the contact groups of the polymer chain affect the looping kinetics and hairpin formation dynamics. Our results are relevant for DNA looping in the absence and presence of protein mediation, DNA hairpin formation, RNA folding, and the folding of polypeptide chains under biologically relevant high-crowding conditions.
ANG-2 for quantitative Na+ determination in living cells by time-resolved fluorescence microscopy
(2014)
Sodium ions (Na+) play an important role in a plethora of cellular processes, which are complex and partly still unexplored. For the investigation of these processes and quantification of intracellular Na+ concentrations ([Na+]i), two-photon coupled fluorescence lifetime imaging microscopy (2P-FLIM) was performed in the salivary glands of the cockroach Periplaneta americana. For this, the novel Na+-sensitive fluorescent dye Asante NaTRIUM Green-2 (ANG-2) was evaluated, both in vitro and in situ. In this context, absorption coefficients, fluorescence quantum yields and 2P action cross-sections were determined for the first time. ANG-2 was 2P-excitable over a broad spectral range and displayed fluorescence in the visible spectral range. Although the fluorescence decay behaviour of ANG-2 was triexponential in vitro, its analysis indicates a Na+-sensitivity appropriate for recordings in living cells. The Na+-sensitivity was reduced in situ, but the biexponential fluorescence decay behaviour could be successfully analysed in terms of quantitative [Na+]i recordings. Thus, physiological 2P-FLIM measurements revealed a dopamine-induced [Na+]i rise in cockroach salivary gland cells, which was dependent on a Na+-K+-2Cl− cotransporter (NKCC) activity. It was concluded that ANG-2 is a promising new sodium indicator applicable for diverse biological systems.
Arsenic-containing hydrocarbons (AsHC) constitute one group of arsenolipids that have been identified in seafood. In this first in vivo toxicity study for AsHCs, we show that AsHCs exert toxic effects in Drosophila melanogaster in a concentration range similar to that of arsenite. In contrast to arsenite, however, AsHCs cause developmental toxicity in the late developmental stages of Drosophila melanogaster. This work illustrates the need for a full characterisation of the toxicity of AsHCs in experimental animals to finally assess the risk to human health related to the presence of arsenolipids in seafood.
We report a 1,2,3-triazol fluoroionophore for detecting Na+ that shows in vitro enhancement in the Na+-induced fluorescence intensity and decay time. The Na+-selective molecule 1 was incorporated into a hydrogel as a part of a fiber optical sensor. This sensor allows the direct determination of Na+ in the range of 1–10 mM by measuring reversible fluorescence decay time changes.
This study aims to further mechanistically understand toxic modes of action after chronic inorganic arsenic exposure. Therefore long-term incubation studies in cultured cells were carried out, to display chronically attained changes, which cannot be observed in the generally applied in vitro short-term incubation studies. Particularly, the cytotoxic, genotoxic and epigenetic effects of an up to 21 days incubation of human urothelial (UROtsa) cells with pico- to nanomolar concentrations of iAsIII and its metabolite thio-DMAV were compared. After 21 days of incubation, cytotoxic effects were strongly enhanced in the case of iAsIII and might partly be due to glutathione depletion and genotoxic effects on the chromosomal level. These results are in strong contrast to cells exposed to thio-DMAV. Thus, cells seemed to be able to adapt to this arsenical, as indicated among others by an increase in the cellular glutathione level. Most interestingly, picomolar concentrations of both iAsIII and thio-DMAV caused global DNA hypomethylation in UROtsa cells, which was quantified in parallel by 5-medC immunostaining and a newly established, reliable, high resolution mass spectrometry (HRMS)-based test system. This is the first time that epigenetic effects are reported for thio-DMAV; iAsIII induced epigenetic effects occur in at least 8000 fold lower concentrations as reported in vitro before. The fact that both arsenicals cause DNA hypomethylation at really low, exposure-relevant concentrations in human urothelial cells suggests that this epigenetic effect might contribute to inorganic arsenic induced carcinogenicity, which for sure has to be further investigated in future studies.