Refine
Has Fulltext
- yes (37) (remove)
Year of publication
- 2012 (37) (remove)
Document Type
- Article (23)
- Doctoral Thesis (8)
- Monograph/Edited Volume (5)
- Master's Thesis (1)
Keywords
- Baasdörper Krönk (5)
- Low German (5)
- Niederdeutsch (5)
- Plattdeutsch (4)
- Erster Weltkrieg <Motiv> (3)
- First World War <literary theme> (3)
- Bauernroman (2)
- German (2)
- Goethe (2)
- Johann Wolfgang von (2)
Institute
- Extern (37) (remove)
Jochen Pahl un de Subrekter
(2012)
Detlev von Liliencron
(2012)
Charakterisierung und Bewertung des Schaffens Detlevs von Liliencron und Überlegungen zu dessen Rezeption. Es werden Liliencrons Liebe zu Schleswig-Holstein, die Unmöglichkeit, ihn einer Schule zuzuordnen sowie die synästhetischen Qualitäten seines innovativen Werkes von dem Synästhetiker Peters hervorgehoben. Auch Humor und Menschlichkeit Liliencrons finden Erwähnung.
Am alten Markt
(2012)
Weihnacht 1914 in Issoudun
(2012)
F. E. Peters wurde 1914 als junger Lehrer eingezogen und an der Marne von den Franzosen gefangengenommen. In seinen Kriegserinnerungen ("Kriegsgefangener in Frankreich (1914-1920)")beschreibt er die Zeit seiner Gefangenschaft und auch seine Freundschaft mit dem Schauspieler Willi Lohmann. In dieser Erzählung organisieren Kriegsgefangene ein Weihnachtsfest wider den Willen der Franzosen.
Der Herr Major
(2012)
Ein alter Major stößt zu einer Reisegesellschaft, die sich auf einem Dampfer nach Hallig Hooge befindet. Durch seine verbalen Ausfälle und seine Trunksucht verspielt der Major allmählich die Achtung, die ihm anfangs entgegengebracht wurde. Eine genaue Beobachtung von gesellschaftlicher Gruppendynamik und unterschiedlichen Rollenverhalten in der Konfrontation mit einem Außenseiter.
Der Gewaltige und der Poet
(2012)
Das Opfer
(2012)
Der alte Timm Wieben sieht die natürliche gottgewollte Ordnung durch den Fortschritt, d. h. den Bau eines Bahndammes in seinem Dorf, gefährdet. Er prophezeit die Notwendigkeit eines Menschenopfers, das die Erde besänftigen soll: "Es muss etwas Lebiges in die Grund". Daraufhin ereignet sich ein schwerer Unfall. Der aus dem Nachlass veröffentlichte Text gehört eindeutig zu dem Umfeld der "Baasdörper Krönk". Er kontrastiert Aberglaube und aufgeklärtes Denken, , ohne in Schwarz-Weiß-Malerei zu verfallen. In Peters' Autobiographie Preis der guten Mächte (1940) erscheint der Großvater als ein Fürsprecher des Rationalismus und, wie Hans Lohse in der Erzählung, als ein Gegenentwurf zu Timm Wieben ("Dat geiht all natürlich to"). Aber auch er erkennt trotz allem die Macht des Übernatürlichen an. Für Peters löst sich der Gegensatz zwischen Licht und Dunkel, Aufklärung und Dämonie in der Religion auf: "Und wenn wir auch den beschränkten Geltungsbereich unserer Leuchte erkennen, so haben wir dennoch die Pflicht, sie ins Dunkel hinauszutragen bis an den alleräußersten Rand unseres Vermögens. Wer aber vor dem letzten, undurchleuchtbaren Dunkel steht, der suche seine Zuflucht nicht bei verdächtigen Mächten des Zaubers, sondern fasse die Hand Gottes, die sich ihm aus der deutschen Bibel Martin Luthers hilfreich entgegenstreckt." (Ausgewählte Werke, Bd II, Hamburg, Hoffmann und Campe, S. 111)
"Hinnerk Pick und der Steernkieker" ist ein poetischer Text, der sich mit dem Astronomen J. J. Sievers, der an der Altonaer Sternwarte tätig war, befasst. J. J. Sievers (1804-1881) stammte aus Stafstedt (Kreis Rendsburg-Eckernförde), einem Dorf in der Nähe von Luhnstedt, dem Heimatdorf von F. E. Peters. Er wird beschrieben als märchenhaft geheimnisvolle Gestalt und zugleich liebenswerter Sonderling, in dessen Augen sich eine Pascalsche Scheu vor der Unendlichkeit des Raumes widerspiegelt. "Immer aber wird mir der Steernkieker teuer bleiben als ein Zeugnis dafür, dass aus der Enge eines holsteinischen Dorfes zum Geist geführt werden kann, wen der Geist gerufen hat. Am Ende ist eines Menschen Drang ins Weite doch vergeblich, wenn er sie nach unruhigen Jahren des Suchens nicht findet in sich selbst." In den Mund des Astronomen Sievers ("de ool Steernkieker", "de ool Klooksnacker") legt Peters am Anfang der "Baasdörper Krönk" die berühmte Beschreibung von Baasdorp und der Anlage des Dorfes in drei sozial definierte konzentrische Kreise (reiche Bauern; Halbhufner und kleine Bauern; schließlich Handwerker und Katenbauern).
The present work is devoted to establishing of a new generation of self-healing anti-corrosion coatings for protection of metals. The concept of self-healing anticorrosion coatings is based on the combination of the passive part, represented by the matrix of conventional coating, and the active part, represented by micron-sized capsules loaded with corrosion inhibitor. Polymers were chosen as the class of compounds most suitable for the capsule preparation. The morphology of capsules made of crosslinked polymers, however, was found to be dependent on the nature of the encapsulated liquid. Therefore, a systematic analysis of the morphology of capsules consisting of a crosslinked polymer and a solvent was performed. Three classes of polymers such as polyurethane, polyurea and polyamide were chosen. Capsules made of these polymers and eight solvents of different polarity were synthesized via interfacial polymerization. It was shown that the morphology of the resulting capsules is specific for every polymer-solvent pair. Formation of capsules with three general types of morphology, such as core-shell, compact and multicompartment, was demonstrated by means of Scanning Electron Microscopy. Compact morphology was assumed to be a result of the specific polymer-solvent interactions and be analogues to the process of swelling. In order to verify the hypothesis, pure polyurethane, polyurea and polyamide were synthesized; their swelling behavior in the solvents used as the encapsulated material was investigated. It was shown that the swelling behavior of the polymers in most cases correlates with the capsules morphology. Different morphologies (compact, core-shell and multicompartment) were therefore attributed to the specific polymer-solvent interactions and discussed in terms of “good” and “poor” solvent. Capsules with core-shell morphology are formed when the encapsulated liquid is a “poor” solvent for the chosen polymer while compact morphologies are formed when the solvent is “good”. Multicompartment morphology is explained by the formation of infinite networks or gelation of crosslinked polymers. If gelation occurs after the phase separation in the system is achieved, core-shell morphology is present. If gelation of the polymer occurs far before crosslinking is accomplished, further condensation of the polymer due to the crosslinking may lead to the formation of porous or multicompartment morphologies. It was concluded that in general, the morphology of capsules consisting of certain polymer-solvent pairs can be predicted on the basis of polymer-solvent behavior. In some cases, the swelling behavior and morphology may not match. The reasons for that are discussed in detail in the thesis. The discussed approach is only capable of predicting capsule morphology for certain polymer-solvent pairs. In practice, the design of the capsules assumes the trial of a great number of polymer-solvent combinations; more complex systems consisting of three, four or even more components are often used. Evaluation of the swelling behavior of each component pair of such systems becomes unreasonable. Therefore, exploitation of the solubility parameter approach was found to be more useful. The latter allows consideration of the properties of each single component instead of the pair of components. In such a manner, the Hansen Solubility Parameter (HSP) approach was used for further analysis. Solubility spheres were constructed for polyurethane, polyurea and polyamide. For this a three-dimensional graph is plotted with dispersion, polar and hydrogen bonding components of solubility parameter, obtained from literature, as the orthogonal axes. The HSP of the solvents are used as the coordinates for the points on the HSP graph. Then a sphere with a certain radius is located on a graph, and the “good” solvents would be located inside the sphere, while the “poor” ones are located outside. Both the location of the sphere center and the sphere radius should be fitted according to the information on polymer swelling behavior in a number of solvents. According to the existing correlation between the capsule morphology and swelling behavior of polymers, the solvents located inside the solubility sphere of a polymer give capsules with compact morphologies. The solvents located outside the solubility sphere of the solvent give either core-shell or multicompartment capsules in combination with the chosen polymer. Once the solubility sphere of a polymer is found, the solubility/swelling behavior is approximated to all possible substances. HSP theory allows therefore prediction of polymer solubility/swelling behavior and consequently the capsule morphology for any given substance with known HSP parameters on the basis of limited data. The latter makes the theory so attractive for application in chemistry and technology, since the choice of the system components is usually performed on the basis of a large number of different parameters that should mutually match. Even slight change of the technology sometimes leads to the necessity to find the analogue of this or that solvent in a sense of solvency but carrying different chemistry. Usage of the HSP approach in this case is indispensable. In the second part of the work examples of the HSP application for the fabrication of capsules with on-demand-morphology are presented. Capsules with compact or core-shell morphology containing corrosion inhibitors were synthesized. Thus, alkoxysilanes possessing long hydrophobic tail, combining passivating and water-repelling properties, were encapsulated in polyurethane shell. The mechanism of action of the active material required core-shell morphology of the capsules. The new hybrid corrosion inhibitor, cerium diethylhexyl phosphate, was encapsulated in polyamide shells in order to facilitate the dispersion of the substance and improve its adhesion to the coating matrix. The encapsulation of commercially available antifouling agents in polyurethane shells was carried out in order to control its release behavior and colloidal stability. Capsules with compact morphology made of polyurea containing the liquid corrosion inhibitor 2-methyl benzothiazole were synthesized in order to improve the colloidal stability of the substance. Capsules with compact morphology allow slower release of the liquid encapsulated material compared to the core-shell ones. If the “in-situ” encapsulation is not possible due to the reaction of the oil-soluble monomer with the encapsulated material, a solution was proposed: loading of the capsules should be performed after monomer deactivation due to the accomplishment of the polymerization reaction. Capsules of desired morphologies should be preformed followed by the loading step. In this way, compact polyurea capsules containing the highly effective but chemically active corrosion inhibitors 8-hydroxyquinoline and benzotriazole were fabricated. All the resulting capsules were successfully introduced into model coatings. The efficiency of the resulting “smart” self-healing anticorrosion coatings on steel and aluminium alloy of the AA-2024 series was evaluated using characterization techniques such as Scanning Vibrating Electron Spectroscopy, Electrochemical Impedance Spectroscopy and salt-spray chamber tests.
Zwischen Morgen und Abend
(2012)
Diese tragische Geschichte von einem Jagdunfall, bei dem ein dreizehnjähriger Junge, einziger Sohn seiner Eltern, ums Leben kommt, ist die bekannteste Episode aus der 1975 posthum veröffentlichten Baasdörper Krönk. F.E. Peters hat sie zu Lebzeiten auf Hochdeutsch veröffentlicht. Die Erzählung variiert den Freischütz-Stoff.