Refine
Has Fulltext
- no (171)
Year of publication
Document Type
- Article (171) (remove)
Is part of the Bibliography
- yes (171)
Keywords
- piezoelectret (3)
- piezoelectrets (3)
- Curie transition (2)
- Electrets (2)
- Ferroelectrets (2)
- P(VDF-TrFE-CFE) terpolymer (2)
- charge-carrier transport (2)
- chemical modification (2)
- dielectric barrier discharge (DBD) (2)
- dielectric properties (2)
- dielectric relaxation spectroscopy (2)
- ferroelectret (2)
- fluoroethylenepropylene (FEP) copolymer (2)
- mid-temperature transition (2)
- piezoelectricity (2)
- sensors and actuators (2)
- space-charge stability (2)
- surface treatment (2)
- (PEDOT (1)
- (high-)voltage measurements (1)
- 3D printing (1)
- Annealing (metallurgy) (1)
- Cellular polypropylene (PP) (1)
- Curie-transition (1)
- Dielectric Relaxation Spectroscopy (DRS) (1)
- Dielectric hysteresis (1)
- Differential Scanning Calorimetry (DSC) (1)
- Doping (1)
- Electric potential (1)
- Epoxy resin (1)
- Epoxy resins (1)
- Ferroelectret (1)
- Ferroelectric polarization (1)
- Ferroelectric polymer (1)
- Forcemyography (1)
- High-impact polystyrene (1)
- Hysteresis (1)
- Insulators (1)
- Memory device (1)
- Mid-temperature transition (1)
- Non-linear dielectric spectroscopy (1)
- Organic FeFET (1)
- Organic TFT (1)
- P(VDF-TFE) copolymer (1)
- P(VDF-TrFE-CFE) (1)
- PSS)-coated porous (1)
- Phase transitions (1)
- Polarization (1)
- Polymer-dispersed liquid crystal (1)
- Relaxor-ferroelectric (RF) fluoropolymers (1)
- Relaxor-ferroelectric polymer (1)
- Surface treatment (1)
- Trapped charges (1)
- acoustic transducers (1)
- acoustic-transducer materials (1)
- all-organic (1)
- all-organic ferroelectret nanogenerator (FENG) (1)
- calibration (1)
- charge storage (1)
- crosslinking (1)
- crystalline phases (1)
- dielectric (1)
- dielectric barrier discharges (1)
- dielectric hysteresis (1)
- dielectric polarisation (1)
- dielectric relaxation (1)
- dielectric resonance spectroscopy (1)
- dielectrics (1)
- differential scanning calorimetry (1)
- dipole grafting (1)
- durability (1)
- effective polarization (1)
- elastomers (1)
- electret polymers (1)
- electret stability (1)
- electrets (1)
- electric sensing devices (1)
- electrical breakdown (1)
- electrical polarization hysteresis (1)
- electro-mechanical transducers (1)
- electro-mechanically active polymers (1)
- electrostatic (1)
- equivalent-circuit (1)
- expanded polytetrafluoroethylene (1)
- experiments (1)
- fabric electrodes (1)
- ferro- and piezoelectrets (1)
- ferroelectric polymer (1)
- ferroelectric polymers (1)
- ferroelectric thin films (1)
- ferroelectricity and piezoelectricity in polymers (1)
- film (1)
- film sensor (1)
- flashover (1)
- fluorinated ethylene-propylene copolymer (FEP) (1)
- frequency response (1)
- functional materials (1)
- haptic feedback (1)
- injection (1)
- intermolecular force (1)
- liquid crystal alignment (1)
- low-density polyethylene (1)
- man-made dipole (1)
- micro-energy harvesting (1)
- mid-temperature transition(s) (1)
- modelling (1)
- motion registration (1)
- multi-layer systems (1)
- multiple (1)
- nanocomposite (1)
- nanofiber (1)
- permittivity enhancement (1)
- piezoelectric measurements (1)
- piezoelectric nanogenerator (PENG) (1)
- piezoelectric polymers (1)
- piezoelectricity-polarization relation (1)
- poly(vinylidenefluoride-trifluoroethylene) P(VDF-TrFE) (1)
- polyethylene (1)
- polyethylene naphthalate (PEN) (1)
- polymer ferroelectrets (1)
- polymer films (1)
- polymer-foam films (1)
- polymers (1)
- polytetrafluoroethylene (PTFE) (1)
- printed electroacoustic thin-film transducers (1)
- printing (1)
- processing (1)
- pyroelectric polymers (1)
- pyroelectricity (1)
- relationships (1)
- relaxor-ferroelectric polymer (1)
- relaxor-ferroelectric polymers (1)
- remanent polarisation (1)
- screen (1)
- screen-printed (1)
- silicone based dielectric elastomer actuators (1)
- soft electro-active materials (1)
- soft matter (1)
- space charge (1)
- spectroscopy (1)
- spin coating (1)
- static-pressure dependence (1)
- stretching (1)
- structure-property (1)
- surface charge (1)
- surface morphology (1)
- surface reconstruction (1)
- surface-roughened (1)
- systems (1)
- temperature dependence (1)
- thermal (1)
- thermally stimulated depolarization current (1)
- thin-film actuators (1)
- titanium dioxide (1)
- tubular-channel polymer systems (1)
- vinylidenefluoride (VDF)-based polymers (1)
- vinylidenefluoride(VDF)-based polymers (1)
- wearable (1)
- wearable electronics (1)
Institute
- Institut für Physik und Astronomie (171) (remove)
A double-layer transcrystalline polypropylene (PP) film with a flat central interface layer between its two transcrystalline layers is obtained by recrystallization from the melt between two polytetrafluoroethylene (PTFE) surfaces on both sides of the PP film. Its electret properties are studied and compared with those of a single-layer transcrystalline PP film re-crystallized in contact with only one PTFE surface. Within experimental uncertainty, the two types of transcrystalline films exhibit the same thermal properties and crystallinities. After thermal poling, however, two hetero-charge layers of opposite polarity are found on the internal interfaces of the double-layer transcrystalline films and may together be considered as micrometer-sized dipoles. The unexpected phenomenon does not occur in single-layer transcrystalline samples without a central interface layer, suggesting that the interfaces between the transcrystalline layers and the micrometer-thick central interface layer may be the origin of deeper traps rather than the crystalline structures in the transcrystallites or the spherulites. The origin of the interfacial charges was also studied by means of an injection-blocking charging method, which revealed that intrinsic charge carriers introduced during recrystallization are most likely responsible for the interfacial charges. It is fascinating that a material as familiar as PP can exhibit such intriguing properties with a special bipolar space-charge polarization across the central interface layer after quasi-epitaxial surface moulding into a double-layer transcrystalline form. In addition to applications in electret (micro-)devices for electro-mechanical transduction, the highly ordered structures may also be employed as a new paradigm for studying charge storage and transport in polymer electrets and in dielectrics for DC electrical insulation.
Spherulite-related space-charge electret properties of polypropylene (PP) have been widely discussed in the past decades. In the present paper, a less-common crystalline structure in PP-transcrystalline PP-is studied regarding its electret behavior in comparison with the typical spherulitic morphology. Polarized light microscopy and differential scanning calorimetry were employed to characterize the crystallite types and crystallinities of transcrystalline and spherulitic PP. Their electret functionality is investigated by means of thermally stimulated discharge experiments, where the cross-over phenomenon is observed on transcrystalline PP films, whereas surface-potential saturation and undercharging on the surface occur on the spherulitic samples. Besides, an asymmetrical behavior of positive and negative surface-charge stabilities is found on PP with spherulites, the negatively charged spherulitic surfaces show a better charge stability. It is shown that PP electrets are very sensitive to changes in the microscopic crystalline structures and their interfaces as well as in the molecular conformations controlled through adjustments of the respective processing steps. In addition, surface and bulk nanocomposites of PP or low-density polyethylene with inorganic particles are included in the comparison. In view of recent developments in the areas of PP-based electret-fiber filters and cellular-foam ferroelectrets, the observed changes in the charge-storage properties may have particular relevance, as the required film, fiber, or foam processing might significantly modify crystalline morphologies and nano-scale interfaces in PP electrets. Limitations in the charge-storage capabilities of interface structures may also be of interest in the context of high-voltage electrical-insulation materials where reduced space-charge accumulation and slightly increased charge transport can be advantageous.
A new variant of the Laser-Induced Pressure-Pulse (LIPP) method for repeatable, time-resolved space-charge profile measurements is proposed and demonstrated. Automated deposition of a fresh laser-target film before each illumination leads to good repeatability of the LIPP and thus allows for the detection of time-resolved changes in the space-charge distribution over many hours. We describe and discuss the experimental setup and its features, compare the repeatability of the LIPP measurements on the same sample without and with re-preparation of the test cell, and present the time-resolved evolution of the space-charge profile in a two-layer arrangement of a silicone-grease and a silicone-elastomer film as an example. Finally, the temperature dependence of the space-charge evolution during polarization under high voltage and during depolarization in short circuit is shown. Possible uses and future developments of the new LIPP approach are also discussed.
Here, piezoelectric transducers consisting of a P(VDF-TrFE) layer with either silver or PEDOT:PSS screen-printed electrodes are studied. The influence of electrodes on the dielectric and electroacoustic properties are studied in dielectric-spectroscopy and ferroelectric-hysteresis measurements. Only when both the bottom and the top electrodes are made of silver, the typical dielectric relaxation of the P(VDF-TrFE) layer is clearly observed. When one or two of the electrodes are of PEDOT:PSS, a Debye-like relaxation is present. Compared with silver electrodes, PEDOT:PSS electrodes allow for moderate self-healing. Consequently, samples with bottom and top PEDOT:PSS electrodes can be poled to saturation, while samples with silver electrodes can hardly be poled to saturation due to destructive electric breakdown. Acoustic transducer measurements show that silver electrodes facilitate higher and broader frequency operation, while PEDOT:PSS electrodes bring slightly lower total harmonic distortion. Overall, the acoustic performance shows no significant deviations between differently electroded samples so that silver electrodes do not offer any advantages for the transducers studied here due to their much higher tendency for destructive electric breakdown.
The prehistory of electrets is not known yet, but it is quite likely that the electrostatic charging behavior of amber (Greek: τò ηλεκτρoν, i.e., “electron”) already was familiar to people in ancient cultures (China, Egypt, Greece, etc.), before the Greek philosopher and scientist Thales of Miletus (6th century BCE)-or rather his disciples and followers-reported it in writing (cf. Figure 1). More than two millennia later, William Gilbert (1544–1603), the physician of Queen Elizabeth I, coined the term “electric” in his book De Magnete, Magneticisque Corporibus, et de Magno Magnete Tellure (1600) for dielectric materials that attract like amber and that included sulfur and glass [1]. The second half of the 18th century saw the invention of the electrophorus or electrophore [2], a capacitive electret device, in 1762 by Johan Carl Wilcke (1732–1796).
Bipolar electrets from polypropylene (PP) are essential, e.g., in electret air filters and in cellular-foam ferroelectrets. Therefore, the mechanism of surface-charge stability enhancement on PP electrets via orthophosphoric-acid surface treatment is investigated in detail. It is shown that the significant charge-stability enhancement can be mainly attributed to deeper surface traps originating from deposited chemicals and topographic features on the modified surfaces. Thermally stimulated discharge of chemically treated and non-treated PP films with different surface-charge densities is used to test the limits of the newly formed deep traps in terms of the capacity for hosting surface charges. When the initial surface-charge density is very high, more charges are forced into shallower original traps on the surface or in the bulk of the treated PP samples, reducing the effect of the deeper surface traps brought by the surface modification. The well-known crossover phenomenon (of the surface-charge decay curves) has been observed between modified PP electrets charged to +/- 2kV and to +/- 3kV. Acoustically probed charge distributions in the thickness direction of PP electrets at different stages of thermal discharging indicate that the deep surface trapping sites may have preference for negative charges, resulting in the observed asymmetric charge stability of the modified PP films.
Polyvinylidene fluoride (PVDF)-based copolymers with tetrafluoroethylene (P(VDF-TFE)), trifluoroethylene (P(VDF-TrFE)) or hexafluoropropylene (P(VDF-HFP)) are of strong interest due to the underlying fundamental mechanisms and the potential ferro-, pyro- and piezo-electrical applications. Their flexibility and their adaptability to various shapes are advantageous in comparison to inorganic ferroelectrics. Here, we study the influence of stretching temperature on the crystalline phases and the dielectric properties in P(VDF-TFE) films by means of Dielectric Relaxation Spectroscopy (DRS), Fourier-Transform InfraRed spectroscopy (FTIR), Wide-Angle X-ray Diffraction (WAXD), Differential Scanning Calorimetry (DSC) and Dynamic Mechanical Analysis (DMA). Especially, the effect of stretching and the influence of the temperature of stretching on the mid-temperature (T-mid) transition are studied in detail. The results show that stretching has a similar effect as that on PVDF, and we observe an increase in the fraction of ferroelectric beta-phase with a simultaneous increment in both melting point (T-m) and crystallinity (chi(c)) of the copolymer. While an increase in the stretching temperature does not have a profound impact on the amount of ferroelectric phase, the stability of the ferroelectric phase seems to improve - as seen in the reduction of the Full Width at Half Maximum (FWHM) of the WAXD peaks in both parallel and perpendicular directions to the molecular chain axis. The observation is also supported by the reduction of dissipation losses with an increase in stretching temperature - as seen in DRS measurements. Finally, both stretching itself and the temperature of stretching affect the various molecular processes taking place in the temperature range of the T-mid transition.
During muscle contractions, radial-force distributions are generated on muscle surfaces due to muscle-volume changes, from which the corresponding body motions can be recorded by means of so-called force myography (FMG). Piezo- or ferroelectrets are flexible piezoelectric materials with attractive materials and sensing properties. In addition to several other applications, they are suitable for detecting force variations by means of wearable devices. In this paper, we prepared piezoelectrets from cellular polypropylene films by optimizing the fabrication procedures, and developed an FMG-recording system based on piezoelectret sensors. Different hand and wrist movements were successfully detected on able-bodied subjects with the FMG system. The FMG patterns were evaluated and identified by means of linear discriminant analysis and artificial neural network algorithms, and average motion-classification accuracies of 96.1% and 94.8%, respectively, were obtained. This paper demonstrates the feasibility of using piezoelectret-film sensors for FMG and may thus lead to alternative methods for detecting body motion and to related applications, e.g., in biomedical engineering or structural-health monitoring.
The Bow on a String
(2018)
The interaction between a bowed string instrument and its player is conveyed by the bow, the vibrational properties of which can be measured either separately on the bow or during the bowing procedure. Here, two piezoelectric film sensors, made of a ferroelectret material, are installed on a violin bow, one sensor at the tip and one at the frog. With these sensors, a violin is played under normal conditions, and the signals are analysed. The features in the resulting spectrograms are identified as string harmonics and longitudinal bow-hair resonances. The bow-hair sections on both sides of the bow-string contact exhibit separate resonances which are observed as absorption dips in the spectra. Owing to the sensor positions at the bow-hair terminations, it can be inferred that the two bow-hair sections act as mutual vibration absorbers. From a regression of the observed resonances, the longitudinal bow-hair velocity can be obtained. With additional film sensors under the violin bridge, body vibrations were also detected providing further details of the coupling mechanisms.
Tetrafluoroethylene-hexafluoropropylene copolymer (FEP) films were treated with titanium-tetrachloride vapor by means of molecular-layer deposition. The treatment leads to considerable improvements of the electret-charge stability on positively charged films. A slight improvement is also observed for negatively charged films. In line with our previous findings, we attribute the improvement in electret properties to the formation of deeper traps on the chemically modified polymer surfaces. Here, we investigate the influence of the charge density on electret stability of FEP films with modified surfaces. Trap-energy spectra obtained from thermally-stimulated-discharge measurements indicate that the charge stability on modified FEP films depends on how the surface traps are populated and on the availability of additional deeper traps.