Refine
Has Fulltext
- no (240) (remove)
Year of publication
- 2019 (240) (remove)
Document Type
- Article (216)
- Other (9)
- Review (7)
- Doctoral Thesis (6)
- Habilitation Thesis (2)
Is part of the Bibliography
- yes (240)
Keywords
- climate (4)
- Holocene (3)
- paleoclimate (3)
- remote sensing (3)
- AMOC (2)
- Asia (2)
- Central Andes (2)
- Climate (2)
- Climate change (2)
- Climate change adaptation (2)
Institute
- Institut für Geowissenschaften (240) (remove)
During eruptive activity of andesitic stratovolcanoes, the extrusion of lava domes, their collapse and intermittent explosions are common volcanic hazards. Many lava domes grow in a preferred direction, in turn affecting the direction of lava flows and pyroclastic density currents. Access to active lava domes is difficult and hazardous, so detailed data characterizing lava dome growth are typically limited, keeping the processes controlling the directionality of extrusions unclear. Here we combine TerraSAR-X satellite radar observations with high-resolution airborne photogrammetry to assess morphological changes, and perform finite element modeling to investigate the impact of loading stress on shallow magma ascent directions associated with lava dome extrusion and crater formation at Volcan de Colima, Mexico. The TerraSAR-X data, acquired in similar to 1-m resolution spotlight mode, enable us to derive a chronology of the eruptive processes from intensity-based time-lapse observations of the general crater and dome evolution. The satellite images are complemented by close-range airborne photos, processed by the Structure-from-Motion workflow. This allows the derivation of high-resolution digital elevation models, providing insight into detailed loading and unloading features. During the observation period from Jan-2013 to Feb-2016, we identify a dominantly W-directed dome growth and lava flow production until Jan-2015. In Feb-2015, following the removal of the active summit dome, the surface crater widened and elongated along a NE-SW axis. Later in May-2015, a new dome grew toward the SW of the crater while a separate vent developed in the NE of the crater, reflecting a change in the direction of magma ascent and possible conduit bifurcation. Finite element models show a significant stress change in agreement with the observed magma ascent direction changes in response to the changing surface loads, both for loading (dome growth) and unloading (crater forming excavation) cases. These results allow insight into shallow dome growth dynamics and the migration of magma ascent in response to changing volcano summit morphology. They further highlight the importance of detailed volcano summit morphology surveillance, as changes in direction or location of dome extrusion may have major implications regarding the directions of potential volcanic hazards, such as pyroclastic density currents generated by dome collapse.
In this paper we report a rare and fortunate event of fast magnetosonic (MS, also called equatorial noise) waves modulated by compressional ultralow frequency (ULF) waves measured by Van Allen Probes. The characteristics of MS waves, ULF waves, proton distribution, and their potential correlations are analyzed. The results show that ULF waves can modulate the energetic ring proton distribution and in turn modulate the MS generation. Furthermore, the variation of MS intensities is attributed to not only ULF wave activities but also the variation of background parameters, for example, number density. The results confirm the opinion that MS waves are generated by proton ring distribution and propose a new modulation phenomenon.
This study aims to identify the best-performing site characterization proxy alternative and complementary to the conventional 30 m average shear-wave velocity V-S30, as well as the optimal combination of proxies in characterizing linear site response. Investigated proxies include T-0 (site fundamental period obtained from earthquake horizontal-to-vertical spectral ratios), V-Sz (measured average shear-wave velocities to depth z, z = 5, 10, 20 and 30 m), Z(0.8) and Z(1.0) (measured site depths to layers having shear-wave velocity 0.8 and 1.0 km/s, respectively), as well as Z(x-infer) (inferred site depths from a regional velocity model, x = 0.8 and 1.0, 1.5 and 2.5 km/s). To evaluate the performance of a site proxy or a combination, a total of 1840 surface-borehole recordings is selected from KiK-net database. Site amplifications are derived using surface-to-borehole response-, Fourier- and cross-spectral ratio techniques and then are compared across approaches. Next, the efficacies of 7 single-proxies and 11 proxy-pairs are quantified based on the site-to-site standard deviation of amplification residuals of observation about prediction using the proxy or the pair. Our results show that T-0 is the best-performing single-proxy among T-0, Z(0.8), Z(1.0) and V-Sz. Meanwhile, T-0 is also the best-performing proxy among T-0, Z(0.8), Z(1.0) and Z(x-infer) complementary to V-S30 in accounting for the residual amplification after V-S30-correction. Besides, T-0 alone can capture most of the site effects and should be utilized as the primary site indicator. Though (T-0, V-S30) is the best-performing proxy pair among (V-S30, T-0), (V-S30, Z(0.8)), (V-S30, Z(1.0)), (V-S30, Z(x-infer)) and (T-0, V-Sz), it is only slightly better than (T-0, V-S20). Considering both efficacy and engineering utility, the combination of T-0 (primary) and V-S20 (secondary) is recommended. Further study is needed to test the performances of various proxies on sites in deep sedimentary basins.
In the Next Generation Attenuation West2 (NGA-West2) project, a 3D subsurface structure model (Japan Seismic Hazard Information Station [J-SHIS]) was queried to establish depths to 1.0 and 2.5 km/s velocity isosurfaces for sites without depth measurement in Japan. In this article, we evaluate the depth parameters in the J-SHIS velocity model by comparing them with their corresponding site-specific depth measurements derived from selected KiK-net velocity profiles. The comparison indicates that the J-SHIS model underestimates site depths at shallow sites and overestimates depths at deep sites. Similar issues were also identified in the southern California basin model. Our results also show that these underestimations and over-estimations have a potentially significant impact on ground-motion prediction using NGA-West2 ground-motion models (GMMs). Site resonant period may be considered as an alternative to depth parameter in the site term of a GMM.
The Kp index is a measure of the midlatitude global geomagnetic activity and represents short-term magnetic variations driven by solar wind plasma and interplanetary magnetic field. The Kp index is one of the most widely used indicators for space weather alerts and serves as input to various models, such as for the thermosphere and the radiation belts. It is therefore crucial to predict the Kp index accurately. Previous work in this area has mostly employed artificial neural networks to nowcast Kp, based their inferences on the recent history of Kp and on solar wind measurements at L1. In this study, we systematically test how different machine learning techniques perform on the task of nowcasting and forecasting Kp for prediction horizons of up to 12 hr. Additionally, we investigate different methods of machine learning and information theory for selecting the optimal inputs to a predictive model. We illustrate how these methods can be applied to select the most important inputs to a predictive model of Kp and to significantly reduce input dimensionality. We compare our best performing models based on a reduced set of optimal inputs with the existing models of Kp, using different test intervals, and show how this selection can affect model performance.
Paleogeographic reconstructions of terranes can greatly benefit from the provenance analysis of sediments. A series of Cenozoic basins provide key sedimentary archives for investigating the growth of the Tibetan Plateau, yet the provenance of the sediments in these basins has never been constrained robustly. Here we report sedimentary petrological and detrital zircon geochronological data from the Paleocene-Eocene Nangqian-Xialaxiu and Gongjue basins. Sandstone detrital modes and zircon morphology suggest that the samples collected in these two basins were sourced from recycled orogen. Detrital zircon geochronology indicates that sediments in the Nangqian-Xialaxiu Basin are characterized by two distinct age populations at 220-280 Ma and 405-445 Ma. In contrast, three predominant age populations of 207-256 Ma, 423-445 Ma, and 1851-1868 Ma, and two subordinate age populations of similar to 50 Ma and similar to 2500 Ma, are recognized in the Gongjue Basin. Comparison with detrital zircon ages from the surrounding terranes suggests that sediments in the Nangqian-Xialaxiu Basin come from the neighboring thrust belts, whereas sediments from the Gongjue Basin are predominantly derived from the distant Songpan-Ganzi Terrane with minor contribution from the surrounding areas. A three-stage Cenozoic evolution of the eastern Tibetan Plateau is proposed. During the Paleocene, the Nangqian-Xialaxiu Basin appeared as a set of small intermontane sub-basins and received plentiful sediments from the neighboring mountain belts; during the Eocene, the Gongjue Basin kept a relatively low altitude and was a depression at the edge of a proto-Plateau; since the Oligocene, the Tibetan Plateau further uplifted and the marginal Gongjue Basin was involved in the Tibetan interior orogeny, indicating the eastward propagation of the Tibetan Plateau.
A number of sedimentary provenance studies have been undertaken in order to determine whether the palaeo-Red River was once a river of continental proportions into which the upper reaches of the Yangtze, Salween, Mekong, Irrawaddy, and Yarlung drained. We have assessed the evidence that the Yarlung originally flowed into the palaeo-Red river, and then sequentially into the Irrawaddy and Brahmaputra, connecting to the latter first via the Lohit and then the Siang. For this river system, we have integrated our new data from the Paleogene-Recent Irrawaddy drainage basin (detrital zircon U-Pb with Hf and fission track, rutile U-Pb, mica Ar-Ar, bulk rock Sr-Nd, and petrography) with previously published data, to produce a palaeodrainage model that is consistent with all datasets. In our model, the Yarlung never flowed into the Irrawaddy drainage: during the Paleogene, the Yarlung suture zone was an internally drained basin, and from Neogene times onwards the Yarlung drained into the Brahmaputra in the Bengal Basin. The Central Myanmar Basin, through which the Irrawaddy River flows today, received predominantly locally-derived detritus until the Middle Eocene, the Irrawaddy initiated as a through-going river draining the Mogok Metamorphic Belt and Bomi-Chayu granites to the north sometime in the Late Eocene to Early Oligocene, and the river was dominated by a stable MMB-dominated drainage throughout the Neogene to present day. Existing evidence does not support any connection between the Yarlung and the Red River in the past, but there is a paucity of suitable palaeo-Red River deposits with which to make a robust comparison. We argue that this limitation also precludes a robust assessment of a palaeo-connection between the Yangtze/ Salween/Mekong and the Red River; it is difficult to unequivocally interpret the recorded provenance changes as the result of specific drainage reorganisations. We highlight the palaeo-Red River deposits of the Hanoi Basin as a potential location for future research focus in view of the near-complete Cenozoic record of palaeo-Red River deposits at this location. A majority of previous studies consider that if a major continental-scale drainage ever existed at all, it fragmented early in the Cenozoic. Such a viewpoint would agree with the growing body of evidence from palaeoaltitude studies that large parts of SE Tibet were uplifted by this period. This then leads towards the intriguing question as to the mechanisms which caused the major period of river incision in the Miocene in this region.
We present new U-Pb LA-ICP-MS data from the Central Andean foreland basins combined with new and published stratigraphic information in order to reconstruct the Miocene fragmentation of the Andean foreland between 26 and 28 degrees S. The disruption of this foreland basin and the subsequent development of elevated intermountain basins have been the focus of several studies. However, the absence of temporal constraints in the Miocene to Pliocene sedimentary record of the low elevation Choromoro and Tucuman foreland basins has presented an obstacle for precise paleogeographic reconstructions. We describe 11 discontinuous stratigraphic sections and use the U-Pb LA-ICP-MS method to date 10 pyroclastic-bearing sediments in order to reconstruct the stratigraphic evolution of the Choromoro and Tucuman basins. We combine our results with published strati graphic and thermochronologic data from adjacent basins to present a refined Miocene paleogeographic model. In a first stage, a continuous Early Miocene foreland lacustrine basin developed, filling up the preexisting Paleogene topography. The second stage is characterized by basin unroofing around similar to 12 Ma; the easily eroded sedimentary cover was removed, leading to the uplift of the underlying basement rocks and the segmentation of the lacustrine system. In the third stage, relief increase took place after similar to 6 Ma due to the low erodibility of the basement blocks; as a result, stable fluvial systems developed. Progressive relief development caused pronounced unconformities in the basins and the development of proximal fluvial-gravitational depositional systems after 3 Ma. This model emphasizes on the relations between tectonics, climate, and erodibility, and their control on the evolution of the depositional systems and relief.
The task of downloading comprehensive datasets of event-based seismic waveforms has been made easier through the development of standardized webservices but is still highly nontrivial because the likelihood of temporary network failures or subtle data errors naturally increases when the amount of requested data is in the order of millions of relatively short segments. This is even more challenging because the typical workflow is not restricted to a single massive download but consists of fetching all possible available input data (e.g., with several repeated download executions) for a processing stage producing any desired user-defined output. Here, we present stream2segment, a highly customizable Python 2+3 package helping the user in the entire workflow of downloading, inspecting, and processing event-based seismic data by means of a relational database management system as archiving storage, which has clear performance and usability advantages, and an integrated processing subroutine requiring a configuration file and a single Python function to produce user-defined output. Stream2segment can also produce diagnostic maps or user-defined plots, which, unlike existing tools, do not require external software dependencies and are not static images but instead are interactive browser-based applications ideally suited for data inspection or annotation tasks and subsequent training of classifiers in foreseen supervised machine-learning applications. Stream2segment has already been used as a data quality tool for datasets within the European Integrated Data Archive and to create a weak-motion database (in the form of a so-called flat file) for the stable continental region of Europe in the context of the European Ground Shaking Intensity Model service, in turn an important building block for seismic hazard studies.
The marine sedimentary record contains unique information about the history of erosion, uplift and climate of the adjacent continent. Inverting this record has been the purpose of many numerical studies. However, limited attention has been given to linking continental erosion to marine sediment transport and deposition in large-scale surface process evolution models. Here we present a new numerical method for marine sediment transport and deposition that is directly coupled to a landscape evolution algorithm solving for the continental fluvial and hillslope erosion equations using implicit and O(N) algorithms. The new method takes into account the sorting of grain sizes (e.g., silt and sand) in the marine domain using a non-linear multiple grain-size diffusion equation and assumes that the sediment flux exported from the continental domain is proportional to the bathymetric slope. Specific transport coefficients and compaction factors are assumed for the two different grain sizes to simulate the stratigraphic architecture. The resulting set of equations is solved using an efficient (O(N) and implicit) algorithm. It can thus be used to invert stratigraphic geometries using a Bayesian approach that requires a large number of simulations. This new method is used to invert the sedimentary geometry of a natural example, the Ogooue Delta (Gabon), over the last similar to 5 Myr. The objective is to unravel the set of erosional histories of the adjacent continental domain compatible with the observed geometry of the offshore delta. For this, we use a Bayesian inversion scheme in which the misfit function is constructed by comparing four geometrical parameters between the natural and the simulated delta: the volume of sediments stored in the delta, the surface slope, the initial and the final shelf lengths. We find that the best-fit values of the transport coefficients for silt in the marine domain are in the range of 300 - 500 m(2)/yr, in agreement with previous studies on offshore diffusion. We also show that, in order to fit the sedimentary geometry, erosion rate on the continental domain must have increased by a factor of 6 to 8 since 5.3 Ma. (C) 2019 Elsevier B.V. All rights reserved.
Design flood estimation is an essential part of flood risk assessment. Commonly applied are flood frequency analyses and design storm approaches, while the derived flood frequency using continuous simulation has been getting more attention recently. In this study, a continuous hydrological modelling approach on an hourly time scale, driven by a multi-site weather generator in combination with a -nearest neighbour resampling procedure, based on the method of fragments, is applied. The derived 100-year flood estimates in 16 catchments in Vorarlberg (Austria) are compared to (a) the flood frequency analysis based on observed discharges, and (b) a design storm approach. Besides the peak flows, the corresponding runoff volumes are analysed. The spatial dependence structure of the synthetically generated flood peaks is validated against observations. It can be demonstrated that the continuous modelling approach can achieve plausible results and shows a large variability in runoff volume across the flood events.
Alluvial and transport-limited bedrock rivers constitute the majority of fluvial systems on Earth. Their long profiles hold clues to their present state and past evolution. We currently possess first-principles-based governing equations for flow, sediment transport, and channel morphodynamics in these systems, which we lack for detachment-limited bedrock rivers. Here we formally couple these equations for transport-limited gravel-bed river long-profile evolution. The result is a new predictive relationship whose functional form and parameters are grounded in theory and defined through experimental data. From this, we produce a power-law analytical solution and a finite-difference numerical solution to long-profile evolution. Steady-state channel concavity and steepness are diagnostic of external drivers: concavity decreases with increasing uplift rate, and steepness increases with an increasing sediment-to-water supply ratio. Constraining free parameters explains common observations of river form: to match observed channel concavities, gravel-sized sediments must weather and fine - typically rapidly - and valleys typically should widen gradually. To match the empirical square-root width-discharge scaling in equilibrium-width gravel-bed rivers, downstream fining must occur. The ability to assign a cause to such observations is the direct result of a deductive approach to developing equations for landscape evolution.
Late Quaternary landscapes of unglaciated Beringia were largely shaped by ice-wedge polygon tundra. Ice Complex (IC) strata preserve such ancient polygon formations. Here we report on the Yukagir IC from Bol'shoy Lyakhovsky Island in northeastern Siberia and suggest that new radioisotope disequilibria (230Th/U) dates of the Yukagir IC peat confirm its formation during the Marine Oxygen Isotope Stage (MIS) 7a–c interglacial period. The preservation of the ice-rich Yukagir IC proves its resilience to last interglacial and late glacial–Holocene warming. This study compares the Yukagir IC to IC strata of MIS 5, MIS 3, and MIS 2 ages exposed on Bol'shoy Lyakhovsky Island. Besides high intrasedimental ice content and syngenetic ice wedges intersecting silts, sandy silts, the Yukagir IC is characterized by high organic matter (OM) accumulation and low OM decomposition of a distinctive Drepanocladus moss-peat. The Yukagir IC pollen data reveal grass-shrub-moss tundra indicating rather wet summer conditions similar to modern ones. The stable isotope composition of Yukagir IC wedge ice is similar to those of the MIS 5 and MIS 3 ICs pointing to similar atmospheric moisture generation and transport patterns in winter. IC data from glacial and interglacial periods provide insights into permafrost and climate dynamics since about 200 ka.
Convergence between the Indian and Asian plates has reshaped large parts of Asia, changing regional climate and biodiversity, yet geodynamic models fundamentally diverge on how convergence was accommodated since the India-Asia collision. Here we report palaeomagnetic data from the Burma Terrane, which is at the eastern edge of the collision zone and is famous for its Cretaceous amber biota, to better determine the evolution of the India-Asia collision. The Burma Terrane was part of a Trans-Tethyan island arc and stood at a near-equatorial southern latitude at similar to 95 Ma, suggesting island endemism for the Burmese amber biota. The Burma Terrane underwent significant clockwise rotation between similar to 80 and 50 Ma, causing its subduction margin to become hyper-oblique. Subsequently, it was translated northward on the Indian Plate by an exceptional distance of at least 2,000 km along a dextral strike-slip fault system in the east. Our reconstructions are only compatible with geodynamic models involving an initial collision of India with a near-equatorial Trans-Tethyan subduction system at similar to 60 Ma, followed by a later collision with the Asian margin.
Aquifer thermal energy storage (ATES) as a complement to fluctuating renewable energy systems is a reliable technology to guarantee continuous energy supply for heating and air conditioning. We investigated a high-temperature (HT) mono-well system (c. 100 degrees C), where the well screens are separated vertically within the aquifer, as an alternative to conventional doublet ATES systems for an underground storage in northern Oman. We analysed the impact of thermal inference between injection and extraction well screens on the heat recovery factor (HRF) in order to define the optimal screento-screen distance for best possible systems efficiency. Two controlling interference parameters were considered: the vertical screen-to-screen distance and aquifer heterogeneities. The sensitivity study shows that with decreasing screen-to-screen distances, thermal interference increases storage performance. A turning point is reached if the screen distance is too close, causing either water breakthrough or negative thermal interference between the screens. Our simulations show that a combined heat plume with spherical geometry results in the highest heat recovery factors due to the lowest surface area to volume ratios. Thick aquifers for mono-well HT-ATES are thus not mandatory Our study shows that a HT-ATES mono-well system is a feasible storage design with high heat recovery factors for continuous cooling or heating purposes.
Isolated extreme habitats are ideally suited to investigate pivotal ecological processes such as niche use, local adaptation and dispersal. Extremophilic animals living in isolated habitats face the problem that dispersal is limited through the absence of suitable dispersal corridors, which in turn facilitates local adaptation. We used five rotifer isolates from extremely acidic mining lakes with a pH of below 3 as model organisms to test whether these isolates are acidotolerant or acidophilic, whether they survive and reproduce at their niche edges (here pH 2 and circum-neutral pH) and whether local adaptation has evolved. To evaluate potential dispersal limitation, we tested whether animals and their parthenogenetic eggs survive and remain reproductive or viable at unfavourable pH-conditions. All five isolates were acidophilic with a pH-optimum in the range of 4-6, which is well above the pH (< 3) of their lakes of origin. At unfavourable high pH, in four out of the five isolates parthenogenetic females produced a high number of non-viable eggs. Females and eggs produced at favourable pH (4) remained vital at an otherwise unfavourable pH of 7, indicating that for dispersal no acidic dispersal corridors are necessary. Common garden experiments revealed no clear evidence for local adaptation in any of the five isolates. Despite their acidophilic nature, all five isolates can potentially disperse via circum-neutral water bodies as long as their residence time is short, suggesting a broader dispersal niche than their realized niche. Local adaptation might have been hampered by the low population sizes of the rotifers in their isolated habitat and the short time span the mining lakes have existed.
Deformation associated with plate convergence at subduction zones is accommodated by a complex system involving fault slip and viscoelastic flow. These processes have proven difficult to disentangle. The 2010 M-w 8.8 Maule earthquake occurred close to the Chilean coast within a dense network of continuously recording Global Positioning System stations, which provide a comprehensive history of surface strain. We use these data to assemble a detailed picture of a structurally controlled megathrust fault frictional patchwork and the three-dimensional rheological and time-dependent viscosity structure of the lower crust and upper mantle, all of which control the relative importance of afterslip and viscoelastic relaxation during postseismic deformation. These results enhance our understanding of subduction dynamics including the interplay of localized and distributed deformation during the subduction zone earthquake cycle.
Germany and the United Kingdom have domestic shale gas reserves which they may exploit in the future to complement their national energy strategies. However gas production releases volatile organic compounds (VOC) and nitrogen oxides (NOx), which through photochemical reaction form ground-level ozone, an air pollutant that can trigger adverse health effects e.g. on the respiratory system. This study explores the range of impacts of a potential shale gas industry in these two countries on local and regional ambient ozone. To this end, comprehensive emission scenarios are used as the basis for input to an online-coupled regional chemistry transport model (WRF-Chem). Here we simulate shale gas scenarios over summer (June, July, August) 2011, exploring the effects of varying VOC emissions, gas speciation, and concentration of NOx emissions over space and time, on ozone formation. An evaluation of the model setup is performed, which exhibited the model’s ability to predict surface meteorological and chemical variables well compared with observations, and consistent with other studies. When different shale gas scenarios were employed, the results show a peak increase in maximum daily 8-hour average ozone from 3.7 to 28.3 μg m–3. In addition, we find that shale gas emissions can force ozone exceedances at a considerable percentage of regulatory measurement stations locally (up to 21% in Germany and 35% in the United Kingdom) and in distant countries through long-range transport, and increase the cumulative health-related metric SOMO35 (maximum percent increase of ~28%) throughout the region. Findings indicate that VOC emissions are important for ozone enhancement, and to a lesser extent NOx, meaning that VOC regulation for a future European shale gas industry will be of especial importance to mitigate unfavorable health outcomes. Overall our findings demonstrate that shale gas production in Europe can worsen ozone air quality on both the local and regional scales.
Following the Middle Permian (Capitanian) mass extinction there was a global ‘reef eclipse’, and this event had an important role in the Paleozoic-Mesozoic transition of reef ecosystems. Furthermore, the recovery pattern of reef ecosystems in the Wuchiapingian of South China, before the radiation of Changhsingian reefs, is poorly understood. Here, we present a detailed sedimentological account of the Tieqiao section, South China, which records the only known Wuchiapingian reef setting from South China. Six reef growing phases were identified within six transgressive-regressive cycles. The cycles represent changes of deposition in a shallow basin to a subtidal outer platform setting, and the reefal build-ups are recorded in the shallowest part of the cycles above wave base in the euphotic zone. Our results show that the initial reef recovery started from the shallowing up part of the 1st cycle, within the Clarkina leveni conodont zone, which is two conodont zones earlier than previously recognized. In addition, even though metazoans, such as sponges, do become important in the development of the reef bodies, they are not a major component until later in the Wuchiapingian in the 5th and 6th transgressive-regressive cycles. This suggests a delayed recovery of metazoan reef ecosystems following the Middle Permian extinction. Furthermore, even though sponges do become abundant within the reefs, it is the presence and growth of the encrusters Archaeolithoporella and Tubiphytes and abundance of microbial micrites that play an important role in stabilizing the reef structures that form topographic highs.
Sociocultural valuation (SCV) of ecosystem services (ES) discloses the principles, importance or preferences expressed by people towards nature. Although ES research has increasingly addressed sociocultural values in past years, little effort has been made to systematically review the components of sociocultural valuation applications for different decision contexts (i.e. awareness raising, accounting, priority setting, litigation and instrument design). In this analysis, we investigate the characteristics of 48 different sociocultural valuation applications—characterised by unique combinations of decision context, methods, data collection formats and participants—across ten European case studies. Our findings show that raising awareness for the sociocultural value of ES by capturing people’s perspective and establishing the status quo, was found the most frequent decision context in case studies, followed by priority setting and instrument development. Accounting and litigation issues were not addressed in any of the applications. We reveal that applications for particular decision contexts are methodologically similar, and that decision contexts determine the choice of methods, data collection formats and participants involved. Therefore, we conclude that understanding the decision context is a critical first step to designing and carrying out fit-for-purpose sociocultural valuation of ES in operational ecosystem management.
Interannual variations in ecosystem primary productivity are dominated by water availability. Until recently, characterizing the photosynthetic response of different ecosystems to soil moisture anomalies was hampered by observational limitations. Here, we use a number of satellite-based proxies for productivity, including spectral indices, sun-induced chlorophyll fluorescence, and data-driven estimates of gross primary production, to reevaluate the relationship between terrestrial photosynthesis and water. In contrast to nonwoody vegetation, we find a resilience of forested ecosystems to reduced soil moisture. Sun-induced chlorophyll fluorescence and data-driven gross primary production indicate an increase in photosynthesis as a result of the accompanying higher amounts of light and temperature despite lowered light-use-efficiency. Conversely, remote sensing indicators of greenness reach their detection limit and largely remain stable. Our study thus highlights the differential responses of ecosystems along a tree cover gradient and illustrates the importance of differentiating photosynthesis indicators from those of greenness for the monitoring and understanding of ecosystems. Plain Language Summary The capacity of vegetation to thrive and to sequester carbon depends on how much water they can have access to. In this work, we evaluate how different types of satellite observations can describe the response of vegetation to changes in soil moisture over the entire planet. The first source of observation measures only the greenness of the land surface, the second measures light that is emitted by pigments in plants which are photosynthetically active (chlorophyll fluorescence), and the third are simulations of gross carbon uptake derived from machine learning techniques. For periods of water shortage all three indicate a reduction of growth in ecosystems with few trees. However, in cold boreal forests, when soil moisture is particularly low, we still detect an increase in photosynthesis due to higher light and temperature conditions, but this is not reflected in the greenness indicator. This work illustrates how lack of water is not necessarily harmful for catching carbon through photosynthesis, but to monitor this effect, we need remote sensing indicators that measure more than just how green the plants are, and fluorescence is likely a good candidate.
The application of electrical resistivity tomography to peatlands supports conventional coring by providing data on the current condition of peatlands, including data on stratigraphy, peat properties and thickness of organic deposits. Data on the current condition of drained peatlands are particularly required to improve estimates of carbon storage as well as losses and emissions from agriculturally used peatlands. However, most of the studies focusing on electrical resistivity tomography surveys have been conducted on natural peatlands with higher groundwater levels. Peatlands drained for agriculture have not often been studied using geophysical techniques. Drained sites are characterized by low groundwater levels and high groundwater fluctuations during the year, which lead to varying levels of water saturation. To validate better electrical resistivity tomography surveys of drained peatlands, the aim of this laboratory study is to investigate the influence of varying water saturation levels on electrical conductivity (reciprocal of resistivity) for a variety of peat and gyttja types, as well as for different degrees of peat decomposition. Results show that different levels of water saturation strongly influence bulk electrical conductivity. Distinct differences in this relationship exist between peat and gyttja substrates and between different degrees of peat decomposition. Peat shows an exponential relationship for all degrees of decomposition, whereas gyttja, in particular organic-rich gyttja, is characterized by a rather unimodal relationship. The slopes for the relationship between electrical conductivity and water content are steeper at high degrees of decomposition than for peat of low degrees of decomposition. These results have direct implications for field electrical resistivity tomography surveys. In drained peatlands that are strongly susceptible to drying, electrical resistivity tomography surveys have a high potential to monitor the actual field water content. In addition, at comparable water saturations, high or low degrees of decomposition can be inferred from electrical conductivity.
The propagation of a seismic rupture on a fault introduces spatial variations in the seismic wave field surrounding the fault. This directivity effect results in larger shaking amplitudes in the rupture propagation direction. Its seismic radiation pattern also causes amplitude variations between the strike-normal and strike-parallel components of horizontal ground motion. We investigated the landslide response to these effects during the 2016 Kumamoto earthquake (M-w 7.1) in central Kyushu (Japan). Although the distribution of some 1500 earthquake-triggered landslides as a function of rupture distance is consistent with the observed Arias intensity, the landslides were more concentrated to the northeast of the southwest-northeast striking rupture. We examined several landslide susceptibility factors: hillslope inclination, the median amplification factor (MAF) of ground shaking, lithology, land cover, and topographic wetness. None of these factors sufficiently explains the landslide distribution or orientation (aspect), although the landslide head scarps have an elevated hillslope inclination and MAF. We propose a new physics-based ground-motion model (GMM) that accounts for the seismic rupture effects, and we demonstrate that the low-frequency seismic radiation pattern is consistent with the overall landslide distribution. Its spatial pattern is influenced by the rupture directivity effect, whereas landslide aspect is influenced by amplitude variations between the fault-normal and fault-parallel motion at frequencies < 2 Hz. This azimuth dependence implies that comparable landslide concentrations can occur at different distances from the rupture. This quantitative link between the prevalent landslide aspect and the low-frequency seismic radiation pattern can improve coseismic landslide hazard assessment.
Shrinking glaciers in the Hindu Kush-Karakoram-Himalaya-Nyainqentanglha (HKKHN) region have formed several thousand moraine-dammed glacial lakes(1-3), some of these having grown rapidly in past decades(3,4). This growth may promote more frequent and potentially destructive glacial lake outburst floods (GLOFs)(5-7). Testing this hypothesis, however, is confounded by incomplete databases of the few reliable, though selective, case studies. Here we present a consistent Himalayan GLOF inventory derived automatically from all available Landsat imagery since the late 1980s. We more than double the known GLOF count and identify the southern Himalayas as a hotspot region, compared to the more rarely affected Hindu Kush-Karakoram ranges. Nevertheless, the average annual frequency of 1.3 GLOFs has no credible posterior trend despite reported increases in glacial lake areas in most of the HKKHN3,8, so that GLOF activity per unit lake area has decreased since the late 1980s. We conclude that learning more about the frequency and magnitude of outburst triggers, rather than focusing solely on rapidly growing glacial lakes, might improve the appraisal of GLOF hazards.
Reconstructing rates and patterns of colluvial soil redistribution in agrarian (hummocky) landscapes
(2019)
Humans have triggered or accelerated erosion processes since prehistoric times through agricultural practices. Optically stimulated luminescence (OSL) is widely used to quantify phases and rates of the corresponding landscape change, by measuring the last moment of daylight exposure of sediments. However, natural and anthropogenic mixing processes, such as bioturbation and tillage, complicate the use of OSL as grains of different depositional ages become mixed, and grains become exposed to light even long after the depositional event of interest. Instead, OSL determines the stabilization age, indicating when sediments were buried below the active mixing zone. These stabilization ages can cause systematic underestimation when calculating deposition rates. Our focus is on colluvial deposition in a kettle hole in the Uckermark region, northeastern Germany. We took 32 samples from five locations in the colluvium filling the kettle hole to study both spatial and temporal patterns in colluviation. We combined OSL dating with advanced age modelling to determine the stabilization age of colluvial sediments. These ages were combined with an archaeological reconstruction of historical ploughing depths to derive the levels of the soil surface at the moment of stabilization; the deposition depths, which were then used to calculate unbiased deposition rates. We identified two phases of colluvial deposition. The oldest deposits (similar to 5 ka) were located at the fringe of the kettle hole and accumulated relatively slowly, whereas the youngest deposits (<0.3 ka) rapidly filled the central kettle hole with rates of two orders of magnitude higher. We suggest that the latter phase is related to artificial drainage, facilitating accessibility in the central depression for agricultural practices. Our results show the need for numerical dating techniques that take archaeological and soil-geomorphological information into account to identify spatiotemporal patterns of landscape change, and to correctly interpret landscape dynamics in anthropogenically influenced hilly landscapes. (c) 2019 The Authors. Earth Surface Processes and Landforms Published by John Wiley & Sons Ltd.
Breakup Without Borders
(2019)
Relative plate motions during continental rifting result from the interplay of local with far-field forces. Here we study the dynamics of rifting and breakup using large-scale numerical simulations of mantle convection with self-consistent evolution of plate boundaries. We show that continental separation follows a characteristic evolution with four distinctive phases: (1) an initial slow rifting phase with low divergence velocities and maximum tensional stresses, (2) a synrift speed-up phase featuring an abrupt increase of extension rate with a simultaneous drop of tensional stress, (3) the breakup phase with inception of fast sea-floor spreading, and (4) a deceleration phase occurring in most but not all models where extensional velocities decrease. We find that the speed-up during rifting is compensated by subduction acceleration or subduction initiation even in distant localities. Our study illustrates new links between local rift dynamics, plate motions, and subduction kinematics during times of continental separation.
Visible-Light-Mediated Photodynamic Water Disinfection @ Bimetallic-Doped Hybrid Clay Nanocomposites
(2019)
This study reports a new class of photocatalytic hybrid clay nanocomposites prepared from low-cost sources (kaolinite clay and Carica papaya seeds) doped with Zn and Cu salts via a solvothermal process. X-ray diffraction analysis suggests that Cu-doping and Cu/Zn-doping introduce new phases into the crystalline structure of Kaolinite clay, which is linked to the reduced band gap of kaolinite from typically between 4.9 and 8.2 eV to 2.69 eV for Cu-doped and 1.5 eV for Cu/Zn hybrid clay nanocomposites (Nisar, J.; Arhammar, C.; Jamstorp, E.; Ahuja, R. Phys. Rev. B 2011, 84, 075120). In the presence of solar light irradiation, Cu- and Cu/Zn-doped nanocomposites facilitate the electron hole pair separation. This promotes the generation of singlet oxygen which in turn improves the water disinfection efficiencies of these novel nanocomposite materials. The nanocomposite materials were further characterized using high-resolution scanning electron microscopy, fluorimetry, therrnogravimetric analysis, and Raman spectroscopy. The breakthrough times of the nanocomposites for a fixed bed mode of disinfection of water contaminated with 2.32 x 10(7) cfu/mL E. coli ATCC 25922 under solar light irradiation are 25 h for Zn-doped, 30 h for Cu-doped, and 35 h for Cu/Zn-doped nanocomposites. In the presence of multidrug and multimetal resistant strains of E. coli, the breakthrough time decreases significantly. Zn-only doped nanocomposites are not photocatalytically active. In the absence of light, the nanocomposites are still effective in decontaminating water, although less efficient than under solar light irradiation. Electrostatic interaction, metal toxicity, and release of singlet oxygen (only in the Cu-doped and Cu/Zn-doped nanocomposites) are the three disinfection mechanisms by which these nanocomposites disinfect water. A regrowth study indicates the absence of any living E. coli cells in treated water even after 4 days. These data and the long hydraulic times (under gravity) exhibited by these nanocomposites during photodisinfection of water indicate an unusually high potential of these nanocomposites as efficient, affordable, and sustainable point-of-use systems for the disinfection of water in developing countries.
The early Cretaceous Koegel Fontein intrusive complex is situated near the Atlantic coast in South Africa, about 350 km northwest of Cape Town. The complex comprises felsic units of granite and syenite with compositionally related dykes, and a single intrusive plug of diorite. Existing zircon U-Pb ages of 144 +/- 2 Ma for the syenite and 133.9 +/- 1.3 Ma for the granite suggest that the emplacement of the complex took place over a period of about 10 My. This study provides additional and independent ages of the Koegel Fontein complex by Ar-40/Ar-39 dating to confirm the onset and duration of magmatism and better define the sequence of igneous units that comprise it. New laser step-heating Ar-40/Ar-3(9) ages on plagioclase and biotite from the main intrusive units in the complex are presented here, including samples previously dated by U-Pb dating. The Ar-40/Ar-39 ages for the granite and syenite units (131.1 +/- 0.9 Ma and 143.3 +/- 0.9, respectively) are in good agreement with the zircon U-Pb ages. Other units not previously dated include the Rooivleitjie alkaline granite (150.7 +/- 0.6 Ma), two quartz-porphyry dykes (143.0 +/- 0.9 and 139.4 +/- 1.7 Ma) and the Zout Rivier diorite plug (133.0 +/- 1.0 Ma). The new results confirm an early onset of magmatism at Koegel Fontein relative to that of the Etendeka Province some 1000 km to the north, which is consistent with the regional south-to-north propagation of South Atlantic rifting. The youngest Ar-40/Ar-3(9) ages at Koegel Fontein (134 to 131 Ma, Rietpoort Granite and 133 Ma, Zout Rivier diorite) correspond to the age of the first magnetic seafloor-spreading anomaly offshore, and we suggest that the longevity of Koegel Fontein magmatism relates to a superposition of pre-drift magmatism onshore and spreading-related magmatism as continental separation began.
Glacial-interglacial variations in CO2 and methane in polar ice cores have been attributed, in part, to changes in global wetland extent, but the wetland distribution before the Last Glacial Maximum (LGM, 21 ka to 18 ka) remains virtually unknown. We present a study of global peatland extent and carbon (C) stocks through the last glacial cycle (130 ka to present) using a newly compiled database of 1,063 detailed stratigraphic records of peat deposits buried by mineral sediments, as well as a global peatland model. Quantitative agreement between modeling and observations shows extensive peat accumulation before the LGM in northern latitudes (> 40 degrees N), particularly during warmer periods including the last interglacial (130 ka to 116 ka, MIS 5e) and the interstadial (57 ka to 29 ka, MIS 3). During cooling periods of glacial advance and permafrost formation, the burial of northern peatlands by glaciers and mineral sediments decreased active peatland extent, thickness, and modeled C stocks by 70 to 90% from warmer times. Tropical peatland extent and C stocks show little temporal variation throughout the study period. While the increased burial of northern peats was correlated with cooling periods, the burial of tropical peat was predominately driven by changes in sea level and regional hydrology. Peat burial by mineral sediments represents a mechanism for long-term terrestrial C storage in the Earth system. These results show that northern peatlands accumulate significant C stocks during warmer times, indicating their potential for C sequestration during the warming Anthropocene.
The Chew Bahir Drilling Project (CBDP) aims to test possible linkages between climate and evolution in Africa through the analysis of sediment cores that have recorded environmental changes in the Chew Bahir basin. In this statistical project we consider the Chew Bahir palaeolake to be a dynamical system consisting of interactions between its different components, such as the waterbody, the sediment beneath lake, and the organisms living within and around the lake. Recurrence is a common feature of such dynamical systems, with recurring patterns in the state of the system reflecting typical influences. Identifying and defining these influences contributes significantly to our understanding of the dynamics of the system. Different recurring changes in precipitation, evaporation, and wind speed in the Chew Bahir basin could result in similar (but not identical) conditions in the lake (e.g., depth and area of the lake, alkalinity and salinity of the lake water, species assemblages in the water body, and diagenesis in the sediments). Recurrence plots (RPs) are graphic displays of such recurring states within a system. Measures of complexity were subsequently introduced to complement the visual inspection of recurrence plots, and provide quantitative descriptions for use in recurrence quantification analysis (RQA). We present and discuss herein results from an RQA on the environmental record from six short (< 17 m) sediment cores collected during the CBDP, spanning the last 45 kyrs. The different types of variability and transitions in these records were classified to improve our understanding of the response of the biosphere to climate change, and especially the response of humans in the area.
Climate and weather conditions in the mid-latitudes are strongly driven by the large-scale atmosphere circulation. Observational data indicate that important components of the large-scale circulation have changed in recent decades, including the strength and the width of the Hadley cell, jets, storm tracks and planetary waves. Here, we use a new statistical-dynamical atmosphere model (SDAM) to test the individual sensitivities of the large-scale atmospheric circulation to changes in the zonal temperature gradient, meridional temperature gradient and global-mean temperature. We analyze the Northern Hemisphere Hadley circulation, jet streams, storm tracks and planetary waves by systematically altering the zonal temperature asymmetry, the meridional temperature gradient and the global-mean temperature. Our results show that the strength of the Hadley cell, storm tracks and jet streams depend, in terms of relative changes, almost linearly on both the global-mean temperature and the meridional temperature gradient, whereas the zonal temperature asymmetry has little or no influence. The magnitude of planetary waves is affected by all three temperature components, as expected from theoretical dynamical considerations. The width of the Hadley cell behaves nonlinearly with respect to all three temperature components in the SDAM. Moreover, some of these observed large-scale atmospheric changes are expected from dynamical equations and are therefore an important part of model validation.
The occurrence of mounds dominated by siliceous sponges and microbialites is often related to distal, deep settings of middle ramps and shelves. This paper presents evidence for Bajocian (Garanliana garantiana Zone) microbial-siliceous sponge mounds formed in open marine but relatively shallow settings of a ramp from the Iberian Basin of eastern Spain. Marked differences in mound spacing, morphology, and composition of the related intermound facies are observed from distal to more proximal settings. The distal (below storm wave base) settings are characterized by alternating tabular-bedded marls and limestones rich in pelagic fossils (ammonites, belemnites), open-marine thin-shelled bivalves (Bositra-like), as well as peloids, which include widely or randomly spaced isolated, small (up to 0.4 m high) and larger (up to 2.5 m high) mounds with upward accretion. The intermediate (near to above storm wave base) settings show tabular, thickened beds of peloidal and/or intraclastic limestones with closely spaced mounds (similar to 1 m high), which often coalesce laterally, forming extensive lenticular structures (up to 10 m wide). The proximal (above storm wave base) depositional settings consist of tabular to irregular beds of intraclastic limestones with widely spaced small (up to 0.4 m high) mounds with mainly tabular geometries. The mound framework contains variable proportions of microbialites (dense to clotted peloidal thrombolitic fabrics) and siliceous sponges (hexactinellids and lithistids in similar proportion) ranging from planar to conic shapes. These morphological and compositional changes allow characterizing three shallowing-upward sequences (sequences 1-3) developed in the overall regressive trend of a basin-wide, upper Bajocian T-R cycle. Episodic wave reworking of the early-cemented mounds resulted in the formation of peloids, small rounded intraclasts, and large, rounded or subangular intraclasts. These nonskeletal micritic grains show internal fabrics related to those of the mound and/or microbialites. A progressive textural gradation towards greater size and lesser roundness of the nonskeletal grains in the areas in the vicinity of the main mound factory is documented (i.e., from large, subangular intraclasts in the areas close to the main mound factory to peloids in the areas that are far from it). We discuss the alternative model of internal waves (instead of storm-induced waves) as the hydrodynamic agent providing the high-energy events needed to explain the origin of the peloidal-intraclastic intermound facies and, likely, also the nutrients needed by the microbialites and siliceous sponges to grow.
We address the question of whether all large-magnitude earthquakes produce an erosion peak in the subaerial components of fluvial catchments. We evaluate the sediment flux response to the Maule earthquake in the Chilean Andes (Mw 8.8) using daily suspended sediment records from 31 river gauges. The catchments cover drainage areas of 350 to around 10,000 km(2), including a wide range of topographic slopes and vegetation cover of the Andean western flank. We compare the 3- to 8-year postseismic record of sediment flux to each of the following preseismic periods: (1) all preseismic data, (2) a 3-year period prior to the seismic event, and (3) the driest preseismic periods, as drought conditions prevailed in the postseismic period. Following the earthquake, no increases in suspended sediment flux were observed for moderate to high percentiles of the streamflow distribution (mean, median, and >= 75th percentile). However, more than half of the examined stations showed increased sediment flux during baseflow. By using a Random Forest approach, we evaluate the contributions of seismic intensities, peak ground accelerations, co-seismic landslides, hydroclimatic conditions, topography, lithology, and land cover to explain the observed changes in suspended sediment concentration and fluxes. We find that the best predictors are hillslope gradient, low-vegetation cover, and changes in streamflow discharge. This finding suggests a combined first-order control of topography, land cover, and hydrology on the catchment-wide erosion response. We infer a reduced sediment connectivity due to the postseismic drought, which increased the residence time of sediment detached and remobilized following the Maule earthquake.
We investigated deep-seated gravitational slope deformation (DSGSD) and slow mass movements in the southern Tien Shan Mountains front using synthetic aperture radar (SAR) time-series data obtained by the ALOS/PALSAR satellite. DSGSD evolves with a variety of geomorphological changes (e.g. valley erosion, incision of slope drainage networks) over time that affect earth surfaces and, therefore, often remain unexplored. We analysed 118 interferograms generated from 20 SAR images that covered about 900 km(2). To understand the spatial pattern of the slope movements and to identify triggering parameters, we correlated surface dynamics with the tectono-geomorphic processes and lithologic conditions of the active front of the Alai Range. We observed spatially continuous, constant hillslope movements with a downslope speed of approximately 71 mm year(-1) velocity. Our findings suggest that the lithological and structural framework defined by protracted deformation was the main controlling factor for sustained relief and, consequently, downslope mass movements. The analysed structures revealed integration of a geological/structural setting with the superposition of Cretaceous-Paleogene alternating carbonatic and clastic sedimentary structures as the substratum for younger, less consolidated sediments. This type of structural setting causes the development of large-scale, gravity-driven DSGSD and slow mass movement. Surface deformations with clear scarps and multiple crest lines triggered planes for large-scale deep mass creeps, and these were related directly to active faults and folds in the geologic structures. Our study offers a new combination of InSAR techniques and structural field observations, along with morphometric and seismologic correlations, to identify and quantify slope instability phenomena along a tectonically active mountain front. These results contribute to an improved natural risk assessment in these structures.
A wide variety of processes controls the time of occurrence, duration, extent, and severity of river floods. Classifying flood events by their causative processes may assist in enhancing the accuracy of local and regional flood frequency estimates and support the detection and interpretation of any changes in flood occurrence and magnitudes. This paper provides a critical review of existing causative classifications of instrumental and preinstrumental series of flood events, discusses their validity and applications, and identifies opportunities for moving toward more comprehensive approaches. So far no unified definition of causative mechanisms of flood events exists. Existing frameworks for classification of instrumental and preinstrumental series of flood events adopt different perspectives: hydroclimatic (large-scale circulation patterns and atmospheric state at the time of the event), hydrological (catchment scale precipitation patterns and antecedent catchment state), and hydrograph-based (indirectly considering generating mechanisms through their effects on hydrograph characteristics). All of these approaches intend to capture the flood generating mechanisms and are useful for characterizing the flood processes at various spatial and temporal scales. However, uncertainty analyses with respect to indicators, classification methods, and data to assess the robustness of the classification are rarely performed which limits the transferability across different geographic regions. It is argued that more rigorous testing is needed. There are opportunities for extending classification methods to include indicators of space-time dynamics of rainfall, antecedent wetness, and routing effects, which will make the classification schemes even more useful for understanding and estimating floods. This article is categorized under: Science of Water > Water Extremes Science of Water > Hydrological Processes Science of Water > Methods
Using optical absorption and Raman spectroscopic measurements, in conjunction with the first-principles calculations, a pressure-induced high-spin (HS)-to-low-spin (LS) state electronic transition of Fe2+ (M2-octahedral site) was resolved around 76-80GPa in a natural triphylite-lithiophilite sample with chemical composition (LiFe0.7082+Mn0.292PO4)-Li-M1-Fe-M2 (theoretical composition (LiFe0.52+Mn0.5PO4)-Li-M1-Fe-M2). The optical absorption spectra at ambient conditions consist of a broad doublet band with two constituents (1) (similar to 9330cm(-1)) and (2) (similar to 7110cm(-1)), resulting from the electronic spin-allowed transition (T2gEg)-T-5-E-5 of octahedral (HSFe2+)-Fe-M2. Both (1) and (2) bands shift non-linearly with pressure to higher energies up to similar to 55GPa. In the optical absorption spectrum measured at similar to 81GPa, the aforementioned HS-related bands disappear, whereas a new broadband with an intensity maximum close to 16,360cm(-1) appears, superimposed on the tail of the high-energy ligand-to-metal O2-Fe2+ charge-transfer absorption edge. We assign this new band to the electronic spin-allowed dd-transition (1)A(1g)(1)T(1g) of LS Fe2+ in octahedral coordination. The high-pressure Raman spectra evidence the Fe2+ HS-to-LS transition mainly from the abrupt shift of the P-O symmetric stretching modes to lower frequencies at similar to 76GPa, the highest pressure achieved in the Raman spectroscopic experiments. Calculations indicated that the presence of Mn-M2(2+) simply shifts the isostructural HS-to-LS transition to higher pressures compared to the triphylite Fe-M2(2+) end-member, in qualitative agreement with our experimental observations.
An understanding of the depositional environment and paleogeography of the Siwalik foreland basin are crucial in interpreting the basin configuration, sediment transport pathways and its evolutionary history. This study examines the sedimentology of the Siwalik succession of the Kameng River valley, Arunachal Himalaya, northeastern India. The facies characteristics of the fine-grained, well-sorted sediments of the Dafla Formation and its complex, polymodal paleocurrent pattern in this section, reveals deposition in a variety of open marine to deltaic environment. The overlying Subansiri Formation, characterized by coarse-grained, thick, multistoried sandstone, and showing more consistent SW-ward paleocurrent, indicate deposition from a large, axial braided river system. The proposed redefinition of the boundary between the Lower Siwalik Dafia and the Middle Siwalik Subansiri formations implies their transition at around 7.5 Ma, instead of 10.5 Ma, suggested earlier. The revised age of the transition is consistent with the age of arrival of the Transhimalayan sediments at 7 Ma and also denotes the time of marine to fluvial transition in this area. Presence of marine sediments in the Kameng section, with similar records further west, indicates the existence of an extensive seaway in the eastern Himalaya during the lower Siwalik time. The extant paleodrainage reconstructions have been recast on the basis of new data on the sedimentology and paleocurrent from this section. It is inferred that the changing sea level, uplifting Shillong Plateau and drainage evolution in the eastern Himalayan foreland during the middle Miocene time controlled the marine to fluvial transition in the basin.
The Raman spectra of pure N-2, CO2, and CH4 were analyzed over the range 10 to 500 bars and from -160 degrees C to 200 degrees C (N-2), 22 degrees C to 350 degrees C (CO2), and -100 degrees C to 450 degrees C (CH4). At constant temperature, Raman peak position, including the more intense CO2 peak (nu+), decreases (shifts to lower wave number) with increasing pressure for all three gases over the entire pressure and temperature (PT) range studied. At constant pressure, the peak position for CO2 and CH4 increases (shifts to higher wave number) with increasing temperature over the entire PT range studied. In contrast, N-2 first shows an increase in peak position with increasing temperature at constant pressure, followed by a decrease in peak position with increasing temperature. The inflection temperature at which the trend reverses for N-2 is located between 0 degrees C and 50 degrees C at pressures above similar to 50 bars and is pressure dependent. Below similar to 50 bars, the inflection temperature was observed as low as -120 degrees C. The shifts in Raman peak positions with PT are related to relative density changes, which reflect changes in intermolecular attraction and repulsion. A conceptual model relating the Raman spectral properties of N-2, CO2, and CH4 to relative density (volume) changes and attractive and repulsive forces is presented here. Additionally, reduced temperature-dependent densimeters and barometers are presented for each pure component over the respective PT ranges. The Raman spectral behavior of the pure gases as a function of temperature and pressure is assessed to provide a framework for understanding the behavior of each component in multicomponent N-2-CO2-CH4 gas systems in a future study.
The geochemical composition of oceanic basalts provides us with a window into the distribution of geochemical elements within the Earth’s mantle in space and time. In conjunction with a throughout knowledge on how the different elements behave e.g. during melt formation and evolution or on their partition behaviour between e.g. minerals and melts this information has been transformed into various models on how oceanic crust is formed along plume influenced or normal mid-ocean ridge segments, how oceanic crust evolves in response to seawater, on subduction recycling of oceanic crust and so forth. The work presented in this habilitation was aimed at refining existing models, putting further constraints on some of the major open questions in this field of research while at the same time trying to increase our knowledge on the behaviour of noble gases as a tracer for melt formation and evolution processes. In the line of this work the author and her co-workers were able to answer one of the major questions concerning the formation of oceanic crust along plume-influenced ridges – in which physical state does the plume material enter the ridge? Based on submarine volcanic glass He, Ne and Ar data, the author and her co-workers have shown that the interaction of mantle plumes with mid-ocean ridges occurs in the physical form of melts. In addition, the author and her co-workers have also put further constraints on one of the major questions concerning the formation of oceanic crust along normal mid-ocean ridges – namely how is the mid-ocean ridge system effectively cooled to form the lower oceanic crust? Based on Ne and Ar data in combination with Cl/K ratios of basaltic glass from the Mid-Atlantic ridge and estimates of crystallisation pressures they have shown, that seawater penetration reaches lower crustal levels close to the Moho, indicating that hydrothermal circulation might be an effective cooling mechanism even for the deep parts of the oceanic crust. Considering subduction recycling, the heterogeneity of the Earth’s mantle and mantle dynamic processes the key question is on which temporal and spatial scales is the Earth’s mantle geochemically heterogeneous? In the line of this work the author along with her co-workers have shown based on Cl/K ratios in conjunction with the Sr, Nd, and Pb isotopes of the OIBs representing the type localities for the different mantle endmembers that the quantity of Cl recycled into the mantle via subduction is not uniform and that neither the HIMU nor the EM1 and EM2 mantle components can be considered as distinct mantle endmembers. In addition, we have shown, based on He, Ne and Ar isotope and trace-element data from the Foundation hotspot that the near ridge seamounts of the Foundation seamount chain formed by the Foundation hotspot erupt lavas with a trace-element signature clearly characteristic of oceanic gabbro which indicates the existence of recycled, virtually unchanged lower oceanic crust in the plume source. This is a clear sign of the inefficiency of the stirring mechanism existing at mantle depth. Similar features are seen in other near-axis hotspot magmas around the world. Based on He, Sr, Nd, Pb and O isotopes and trace elements in primitive mafic dykes from the Etendeka flood basalts, NW Namibia the author along with her co-workers have shown that deep, less degassed mantle material carried up by a mantle plume contributed significantly to the flood basalt magmatism. The Etendeka flood basalts are part of the South Atlantic LIP, which is associated with the breakup of Gondwana, the formation of the Paraná-Etendeka flood basalts and the Walvis Ridge - Tristan da Cunha hotspot track. Thus reinforcing the lately often-challenged concept of mantle plumes and the role of mantle plumes in the formation of large igneous provinces. Studying the behaviour of noble gases during melt formation and evolution the author along with her co-workers has shown that He can be considerable more susceptible to changes during melt formation and evolution resulting not only in a complete decoupling of He isotopes from e.g. Ne or Pb isotopes but also in a complete loss of the primary mantle isotope signal. They have also shown that this decoupling occurs mainly during the melt formation processes requiring He to be more compatible during mantle melting than Ne. In addition, the author along with her co workers were able to show that incorporation of atmospheric noble gases into igneous rocks is in general a two-step process: (1) magma contamination by assimilation of altered oceanic crust results in the entrainment of air-equilibrated seawater noble gases; (2) atmospheric noble gases are adsorbed onto grain surfaces during sample preparation. This implies, considering the ubiquitous presence of the contamination signal, that magma contamination by assimilation of a seawater-sourced component is an integral part of mid-ocean ridge basalt evolution.
The Schwarzenberg mining district in the western Erzgebirge hosts numerous skarn-hosted tin-polymetallic deposits, such as Breitenbrunn. The St. Christoph mine is located in the Breitenbrunn deposit and is the locus typicus of christophite, an iron-rich sphalerite variety, which can be associated with indium enrichment. This study presents a revision of the paragenetic scheme, a contribution to the indium behavior and potential, and discussion on the origin of the sulfur. This was achieved through reflected light microscopy, SEM-based MLA, EPMA, and bulk mineral sulfur isotope analysis on 37 sulfide-rich skarn samples from a mineral collection. The paragenetic scheme includes: a pre-mineralization stage of anhydrous calc-silicates and hydrous minerals; an oxide stage, dominated by magnetite; a sulfide stage of predominantly sphalerite, minor pyrite, chalcopyrite, arsenopyrite, and galena. Some sphalerite samples present elevated indium contents of up to 0.44 wt%. Elevated iron contents (4-10 wt%) in sphalerite can be tentatively linked to increased indium incorporation, but further analyses are required. Analyzed sulfides exhibit homogeneous delta S-34 values (-1 to +2 parts per thousand VCDT), assumed to be post-magmatic. They correlate with other Fe-Sn-Zn-Cu-In skarn deposits in the western Erzgebirge, and Permian vein-hosted associations throughout the Erzgebirge region.
The Alpine orogen formed as a result of the collision between the Adriatic and European plates. Significant crustal heterogeneity exists within the region due to the long history of interplay between these plates, other continental and oceanic blocks in the region, and inherited crustal features from earlier orogenies. Deformation relating to the collision continues to the present day. Here, a seismically constrained, 3-D structural and density model of the lithosphere of the Alps and their respective forelands, derived from integrating numerous geoscientific datasets, was adjusted to match the observed gravity field. It is shown that the distribution of seismicity and deformation within the region correlates well to thickness and density changes within the crust, and that the present-day Adriatic crust is both thinner and denser (22.5 km, 2800 kg m(-3) ) than the European crust (27.5 km, 2750 kg m(-3)). Alpine crust derived from each respective plate is found to show the same trend, with zones of Adriatic provenance (Austro-Alpine unit and Southern Alps) found to be denser and those of European provenance (Helvetic zone and Tauern Window) to be less dense. This suggests that the respective plates and related terranes had similar crustal properties to the present-day ones prior to orogenesis. The model generated here is available for open-access use to further discussions about the crust in the region.
We measure valence-to-core x-ray emission spectra of compressed crystalline GeO₂ up to 56 GPa and of amorphous GeO₂ up to 100 GPa. In a novel approach, we extract the Ge coordination number and mean Ge-O distances from the emission energy and the intensity of the Kβ'' emission line. The spectra of high-pressure polymorphs are calculated using the Bethe-Salpeter equation. Trends observed in the experimental and calculated spectra are found to match only when utilizing an octahedral model. The results reveal persistent octahedral Ge coordination with increasing distortion, similar to the compaction mechanism in the sequence of octahedrally coordinated crystalline GeO₂ high-pressure polymorphs.
Plate tectonics is among the most important geological processes on Earth, but its emergence and evolution remain unclear. Here we extrapolate models of present-day plate tectonics to the past and propose that since about three billion years ago the rise of continents and the accumulation of sediments at continental edges and in trenches has provided lubrication for the stabilization of subduction and has been crucial in the development of plate tectonics on Earth. We conclude that the two largest surface erosion and subduction lubrication events occurred after the Palaeoproterozoic Huronian global glaciations (2.45 to 2.2 billion years ago), leading to the formation of the Columbia supercontinent, and after the Neoproterozoic ‘snowball’ Earth glaciations (0.75 to 0.63 billion years ago). The snowball Earth event followed the ‘boring billion’—a period of reduced plate tectonic activity about 1.75 to 0.75 billion years ago that was probably caused by a shortfall of sediments in trenches—and it kick-started the modern episode of active plate tectonics.
This study presents the first suite of apatite fission-track (AFT) ages from the SE part of the Western Sudetes. AFT cooling ages from the Orlica-snie(z) over dotnik Dome and the Upper Nysa Klodzka Graben range from Late Cretaceous (84 Ma) to Early Palaeocene-Middle Eocene (64-45 Ma). The first stage of basin evolution (similar to 100-90 Ma) was marked by the formation of a local extensional depocentre and disruption of the Mesozoic planation surface. Subsequent far-field convergence of European microplates resulted in Coniacian-Santonian (similar to 89-83 Ma) thrust faulting. AFT data from both metamorphic basement and Mesozoic sedimentary cover indicate homogenous Late Cretaceous burial of the entire Western Sudetes. Thermal history modeling suggests that the onset of cooling could be constrained between 89 and 63 Ma with a climax during the Palaeocene-Middle Eocene basin inversion phase.
There is a shortage of sediment-routing monitoring worldwide, despite its relevance to environmental processes. In drylands, where water resources are more vulnerable to the sediment dynamics, this flaw is even more harmful. In the semi-arid Caatinga biome in the North-east of Brazil, rivers are almost all intermittent and hydro-sedimentological monitoring is scarce. In the biome, water supply derives from thousands of surface reservoirs, whose water availability is liable to be reduced by siltation and sediment-related pollution. The goal of this research was to evaluate the potential of multi-temporal high-resolution satellite imagery (RapidEye) to assess the suspended sediment concentration (SSC) in the medium-sized intermittent Jaguaribe River, Brazil, during a 5-year period. We validated 15 one-, two- and three-band indices for SSC estimation based on RapidEye spectral bands deduced in the context of the present investigation and nine indices proposed in the literature for other optical sensors, by comparing them with in-situ concentration data. The in-situ SSC data ranged from 67 mg.L-1 to 230 mg.L-1. We concluded that RapidEye images can assess moderate SSC of intermittent rivers, even when their discharge is low. The RapidEye indices performed better than those from literature. The spectral band that best represented SSC was the near infrared, whose performance improved when associated with the green band. This conclusion agrees with literature findings for diverse sedimentological contexts. The three-band spectral indices performed worse than those with only one or two spectral bands, showing that the use of a third band did not enhance the model ability. Besides, we show that the hydrological characteristics of semi-arid intermittent rivers generate difficulties to monitor SSC using optical satellite remote sensing, such as time-concentrated sediment yield; and its association with recent rainfall events and, therefore, with cloudy sky.
Ground and space-based geomagnetic data were used in the investigation of the longitudinal, seasonal and lunar phase dependence of the equatorial counter electrojet (CEJ) occurrence in the Peruvian, Brazilian, African, Indian and Philippine sectors during geomagnetically quiet days from the solar cycle 24 (2008 to 2018). We found that CEJ events occur more frequently during the morning (MCEJ) than in the afternoon (ACEJ). The highest MCEJ and ACEJ occurrence rates were observed for the Brazilian sector. Distinct seasonal dependence was found for each longitudinal sector under investigation. The lunar phase dependence was determined for the first time for the Philippine sector (longitude 125 degrees E), and it was shown to be less pronounced than in the Peruvian, Brazilian and African sectors. We demonstrate that differences in CEJ rates derived from ground-based and satellite data can arise from the longitudinal separation between low-latitude and equatorial stations that are used to determine the signal and its consequent time delay in their sunrise/sunset times at ionospheric heights.
Determining the optimal grid resolution for topographic analysis on an airborne lidar dataset
(2019)
Digital elevation models (DEMs) are a gridded representation of the surface of the Earth and typically contain uncertainties due to data collection and processing. Slope and aspect estimates on a DEM contain errors and uncertainties inherited from the representation of a continuous surface as a grid (referred to as truncation error; TE) and from any DEM uncertainty. We analyze in detail the impacts of TE and propagated elevation uncertainty (PEU) on slope and aspect.
Using synthetic data as a control, we define functions to quantify both TE and PEU for arbitrary grids. We then develop a quality metric which captures the combined impact of both TE and PEU on the calculation of topographic metrics. Our quality metric allows us to examine the spatial patterns of error and uncertainty in topographic metrics and to compare calculations on DEMs of different sizes and accuracies.
Using lidar data with point density of ∼10 pts m−2 covering Santa Cruz Island in southern California, we are able to generate DEMs and uncertainty estimates at several grid resolutions. Slope (aspect) errors on the 1 m dataset are on average 0.3∘ (0.9∘) from TE and 5.5∘ (14.5∘) from PEU. We calculate an optimal DEM resolution for our SCI lidar dataset of 4 m that minimizes the error bounds on topographic metric calculations due to the combined influence of TE and PEU for both slope and aspect calculations over the entire SCI. Average slope (aspect) errors from the 4 m DEM are 0.25∘ (0.75∘) from TE and 5∘ (12.5∘) from PEU. While the smallest grid resolution possible from the high-density SCI lidar is not necessarily optimal for calculating topographic metrics, high point-density data are essential for measuring DEM uncertainty across a range of resolutions.