Refine
Document Type
- Article (4)
- Doctoral Thesis (3)
- Postprint (3)
- Other (2)
Language
- English (12) (remove)
Is part of the Bibliography
- yes (12)
Keywords
- 3D printing (12) (remove)
Institute
The reduction in cost and increasing benefits of 3D printing technologies suggest the potential for printing dental prosthetics. However, although 3D printing technologies seem to be promising, their implementation in practice is complicated. To identify and rank the greatest implementation challenges of 3D printing in dental practices, the present study surveys dentists, dental technicians, and 3D printing companies using a ranking-type Delphi study. Our findings imply that a lack of knowledge is the most crucial obstacle to the implementation of 3D printing technologies. The high training effort of staff and the favoring of conventional methods, such as milling, are ranked as the second and third most relevant factors. Investment costs ranked in seventh place, whereas the lack of manufacturing facilities and the obstacle of print duration ranked below average. An inclusive implementation of additive manufacturing could be achieved primarily through the education of dentists and other staff in dental practices. In this manner, production may be managed internally, and the implementation speed may be increased.
The reduction in cost and increasing benefits of 3D printing technologies suggest the potential for printing dental prosthetics. However, although 3D printing technologies seem to be promising, their implementation in practice is complicated. To identify and rank the greatest implementation challenges of 3D printing in dental practices, the present study surveys dentists, dental technicians, and 3D printing companies using a ranking-type Delphi study. Our findings imply that a lack of knowledge is the most crucial obstacle to the implementation of 3D printing technologies. The high training effort of staff and the favoring of conventional methods, such as milling, are ranked as the second and third most relevant factors. Investment costs ranked in seventh place, whereas the lack of manufacturing facilities and the obstacle of print duration ranked below average. An inclusive implementation of additive manufacturing could be achieved primarily through the education of dentists and other staff in dental practices. In this manner, production may be managed internally, and the implementation speed may be increased.
The availability of commercial 3D printers and matching 3D design software has allowed a wide range of users to create physical prototypes – as long as these objects are not larger than hand size. However, when attempting to create larger, "human-scale" objects, such as furniture, not only are these machines too small, but also the commonly used 3D design software is not equipped to design with forces in mind — since forces increase disproportionately with scale.
In this thesis, we present a series of end-to-end fabrication software systems that support users in creating human-scale objects. They achieve this by providing three main functions that regular "small-scale" 3D printing software does not offer: (1) subdivision of the object into small printable components combined with ready-made objects, (2) editing based on predefined elements sturdy enough for larger scale, i.e., trusses, and (3) functionality for analyzing, detecting, and fixing structural weaknesses. The presented software systems also assist the fabrication process based on either 3D printing or steel welding technology.
The presented systems focus on three levels of engineering challenges: (1) fabricating static load-bearing objects, (2) creating mechanisms that involve motion, such as kinematic installations, and finally (3) designing mechanisms with dynamic repetitive movement where power and energy play an important role.
We demonstrate and verify the versatility of our systems by building and testing human-scale prototypes, ranging from furniture pieces, pavilions, to animatronic installations and playground equipment. We have also shared our system with schools, fablabs, and fabrication enthusiasts, who have successfully created human-scale objects that can withstand with human-scale forces.
The article describes a systematic investigation of the effects of an aqueous NaOH treatment of 3D printed poly(lactic acid) (PLA) scaffolds for surface activation. The PLA surface undergoes several morphology changes and after an initial surface roughening, the surface becomes smoother again before the material dissolves. Erosion rates and surface morphologies can be controlled by the treatment. At the same time, the bulk mechanical properties of the treated materials remain unaltered. This indicates that NaOH treatment of 3D printed PLA scaffolds is a simple, yet viable strategy for surface activation without compromising the mechanical stability of PLA scaffolds.
The article describes a systematic investigation of the effects of an aqueous NaOH treatment of 3D printed poly(lactic acid) (PLA) scaffolds for surface activation. The PLA surface undergoes several morphology changes and after an initial surface roughening, the surface becomes smoother again before the material dissolves. Erosion rates and surface morphologies can be controlled by the treatment. At the same time, the bulk mechanical properties of the treated materials remain unaltered. This indicates that NaOH treatment of 3D printed PLA scaffolds is a simple, yet viable strategy for surface activation without compromising the mechanical stability of PLA scaffolds.
Here, a promising approach for producing piezo-polymer transducers in a one-step process is presented. Using 3D-printing technology and polypropylene (PP) filaments, we are able to print a two-layered film structure with regular cavities of precisely controlled size and shape. It is found that the 3D-printed samples exhibit piezoelectric coefficients up to 200 pC/N, similar to those of other PP ferroelectrets, and their temporal and thermal behavior is in good agreement with those known of PP ferroelectrets. The piezoelectric response strongly decreases for applied pressures above 20 kPa, as the pressure in the air-filled cavities strongly influences the overall elastic modulus of ferroelectrets.
TrussFormer
(2019)
We present TrussFormer, an integrated end-to-end system that allows users to 3D print large-scale kinetic structures, i.e., structures that involve motion and deal with dynamic forces. TrussFormer builds on TrussFab, from which it inherits the ability to create static large-scale truss structures from 3D printed connectors and PET bottles. TrussFormer adds movement to these structures by placing linear actuators into them: either manually, wrapped in reusable components called assets, or by demonstrating the intended movement. TrussFormer verifies that the resulting structure is mechanically sound and will withstand the dynamic forces resulting from the motion. To fabricate the design, TrussFormer generates the underlying hinge system that can be printed on standard desktop 3D printers. We demonstrate TrussFormer with several example objects, including a 6-legged walking robot and a 4m-tall animatronics dinosaur with 5 degrees of freedom.
TrussFormer
(2018)
We present TrussFormer, an integrated end-to-end system that allows users to 3D print large-scale kinetic structures, i.e., structures that involve motion and deal with dynamic forces. TrussFormer builds on TrussFab, from which it inherits the ability to create static large-scale truss structures from 3D printed connectors and PET bottles. TrussFormer adds movement to these structures by placing linear actuators into them: either manually, wrapped in reusable components called assets, or by demonstrating the intended movement. TrussFormer verifies that the resulting structure is mechanically sound and will withstand the dynamic forces resulting from the motion. To fabricate the design, TrussFormer generates the underlying hinge system that can be printed on standard desktop 3D printers. We demonstrate TrussFormer with several example objects, including a 6-legged walking robot and a 4m-tall animatronics dinosaur with 5 degrees of freedom.
Metamaterial devices
(2018)
Digital fabrication machines such as 3D printers excel at producing arbitrary shapes, such as for decorative objects. In recent years, researchers started to engineer not only the outer shape of objects, but also their internal microstructure. Such objects, typically based on 3D cell grids, are known as metamaterials. Metamaterials have been used to create materials that, e.g., change their volume, or have variable compliance.
While metamaterials were initially understood as materials, we propose to think of them as devices.
We argue that thinking of metamaterials as devices enables us to create internal structures that offer functionalities to implement an input-process-output model without electronics, but purely within the material’s internal structure. In this thesis, we investigate three aspects of such metamaterial devices that implement parts of the input-process-output model: (1) materials that process analog inputs by implementing mechanisms based on their microstructure, (2) that process digital signals by embedding mechanical computation into the object’s microstructure, and (3) interactive metamaterial objects that output to the user by changing their outside to interact with their environment. The input to our metamaterial devices is provided directly by the users interacting with the device by means of physically pushing the metamaterial, e.g., turning a handle, pushing a button, etc.
The design of such intricate microstructures, which enable the functionality of metamaterial devices, is not obvious. The complexity of the design arises from the fact that not only a suitable cell geometry is necessary, but that additionally cells need to play together in a well-defined way. To support users in creating such microstructures, we research and implement interactive design tools. These tools allow experts to freely edit their materials, while supporting novice users by auto-generating cells assemblies from high-level input. Our tools implement easy-to-use interactions like brushing, interactively simulate the cell structures’ deformation directly in the editor, and export the geometry as a 3D-printable file. Our goal is to foster more research and innovation on metamaterial devices by allowing the broader public to contribute.
The article describes the surface modification of 3D printed poly(lactic acid) (PLA) scaffolds with calcium phosphate (CP)/gelatin and CP/chitosan hybrid coating layers. The presence of gelatin or chitosan significantly enhances CP co-deposition and adhesion of the mineral layer on the PLA scaffolds. The hydrogel/CP coating layers are fairly thick and the mineral is a mixture of brushite, octacalcium phosphate, and hydroxyapatite. Mineral formation is uniform throughout the printed architectures and all steps (printing, hydrogel deposition, and mineralization) are in principle amenable to automatization. Overall, the process reported here therefore has a high application potential for the controlled synthesis of biomimetic coatings on polymeric biomaterials.