Refine
Has Fulltext
- yes (3)
Document Type
- Doctoral Thesis (3) (remove)
Is part of the Bibliography
- yes (3)
Keywords
- Polyelektrolyt (3) (remove)
Institute
- Institut für Chemie (3) (remove)
Ultrathin, semi-permeable membranes are not only essential in natural systems (membranes of cells or organelles) but they are also important for applications (separation, filtering) in miniaturized devices. Membranes, integrated as diffusion barriers or filters in micron scale devices need to fulfill equivalent requirements as the natural systems, in particular mechanical stability and functionality (e.g. permeability), while being only tens of nm in thickness to allow fast diffusion times. Promising candidates for such membranes are polyelectrolyte multilayers, which were found to be mechanically stable, and variable in functionality. In this thesis two concepts to integrate such membranes in larger scale structures were developed. The first is based on the directed adhesion of polyelectrolyte hollow microcapsules. As a result, arrays of capsules were created. These can be useful for combinatorial chemistry or sensing. This concept was expanded to couple encapsulated living cells to the surface. The second concept is the transfer of flat freestanding multilayer membranes to structured surfaces. We have developed a method that allows us to couple mm2 areas of defect free film with thicknesses down to 50 nm to structured surfaces and to avoid crumpling of the membrane. We could again use this technique to produce arrays of micron size. The freestanding membrane is a diffusion barrier for high molecular weight molecules, while small molecules can pass through the membrane and thus allows us to sense solution properties. We have shown also that osmotic pressures lead to membrane deflection. That could be described quantitatively.
Der Adhäsionsprozess an Cellulosefasern sollte bis hin zur molekularen Ebene aufgeklärt werden. Zuerst wurde eine definierte Celluloseoberfläche durch Aufschleudern hergestellt und eingehend charakterisiert wurde. Die Beschaffenheit der Oberfläche ist stark abhängig von der Konzentration Celluloselösung, die für das Aufschleudern benutzt wurde. Für geringe Konzentrationen bildete sich ein Netzwerk von Cellulosefibrillen über die Siliziumoberfläche aus. In einem mittleren Bereich wurden geschlossene Filme mit Dicken zwischen 1,5 und ca. 10 nm erhalten. Diese Filme wiesen eine Rauhigkeit unter 2 nm auf, was der Größe eines Cellulosemoleküls entspräche. Mit höheren Konzentrationen wurden die Filme dicker und auch rauer. Die molekular glatten Cellulosefilme wurden zur Untersuchung der Adhäsionseigenschaften zwischen Celluloseoberflächen und ihrer Modifikation durch den Einfluss von Haftvermittlern (Polyelektrolyte) eingesetzt. Dafür wurde das Haftungsvermögen von Celluloseperlen auf der glatten Celluloseoberfläche analysiert. Die Adhäsion der Celluloseperlen hängt dabei von der Menge und von der Art des adsorbierten Polyelektrolyts ab. Geringe Polyelektrolytkonzentrationen ermöglichen wegen der teilweisen Bedeckung der Celluloseoberflächen eine Verstärkung der Haftvermittlung (Adhäsion). Höhere Konzentrationen an Polyelektrolyten bedecken die Celluloseoberfläche komplett, so dass die Symmetrie der Polyelektrolytadsorption entscheidend wird. Wenn Celluloseperlen und glatte Celluloseoberfläche gleichzeitig mit Polyelektrolyten beschichtet werden verringert sich bei hohen Konzentrationen die Adhäsion erheblich. Ein hohes Maß an Adhäsion wird dagegen erreicht, wenn nur eine der beiden gegenüberliegende Celluloseoberflächen separat beschichtet und dann in Kontakt mit der anderen gebracht Oberfläche wurde. Der Einfluss einer äußeren Kraft auf die haftenden Celluloseperlen wurde untersucht, um eine Aussage über die auftretenden Adhäsionskräfte machen zu können. Dafür wurde eine spezielle Strömungszelle entwickelt, mit der die Bewegung von Celluloseperlen beobachtet werden kann. Je nach Ausrichtung der Strömungszelle bewegten sich die Celluloseperlen unterschiedlich schnell. War die Strömungszelle horizontal ausgerichtet, wirkte zusätzlich zur Adhäsionskraft noch die Gravitation auf die Oberfläche, so dass hier eine wesentlich langsamere Durchschnittsgeschwindigkeit ermittelt wurde als für die Messungen in vertikaler Ausrichtung. Die Zugabe von verschiedenen Polyelektrolyten bei den Messungen mit der Strömungszelle hatte einen erheblichen Einfluss auf die Beweglichkeit der haftenden Celluloseperlen. Bei geringen Polyelektrolytkonzentrationen wurde das Potential der einzelnen Polyelektrolyten zur effektiven Haftvermittlung durch eine signifikant geringere Durchschnittsgeschwindigkeit der rollenden Celluloseperlen sichtbar. Aus der kritischen Anfangsgeschwindigkeit der rollenden Celluloseperlen wurde die Adhäsionsarbeit errechnet, die für die Bewegung nötig ist.
The goal of this work was to study the binding of ions to polymers and lipid bilayer membranes in aqueous solutions. In the first part of this work, the influence of various inorganic salts and polyelectrolytes on the structure of water was studied using Isothermal Titration Calorimetry (ITC). The heat of dilution of the salts was used as a scale of water structure making and breaking of the ions. The heats of dilution could be attributed to the Hofmeister Series. Following this, the binding of Ca2+ to poly(sodium acrylate) (NaPAA) was studied. ITC and a Ca2+ Ion Selective Electrode were used to measure the reaction enthalpy and binding isotherm. Binding of Ca2+ ions to PAA, was found to be highly endothermic and therefore solely driven by entropy. We then compared the binding of ions to the one-dimensional PAA polymer chain to the binding to lipid vesicles with the same functional groups. As for the polymer, Ca2+ binding was found to be endothermic. Binding of calcium to the lipid bilayer was found to be weaker than to the polymer. In the context of these experiments, it was shown that Ca2+ not only binds to charged but also to zwitterionic lipid vesicles. Finally, we studied the interaction of two salts, KCl and NaCl, to a neutral polymer gel, PNIPAAM, and to the ionic polymer PAA. Combining calorimetry and a potassium selective electrode we observed that the ions interact with both polymers, whether containing charges or not.