Refine
Year of publication
Document Type
Keywords
- Connectivity (4)
- remote sensing (3)
- runoff (3)
- Andes (2)
- Brazil (2)
- Climate (2)
- Forecasting Framework (2)
- IMPRESSIONS (2)
- Jaguaribe Basin (2)
- Nordeste (2)
Institute
- Institut für Geowissenschaften (67) (remove)
The flash-flood in Braunsbach in the north-eastern part of Baden-Wuerttemberg/Germany was a particularly strong and concise event which took place during the floods in southern Germany at the end of May/early June 2016. This article presents a detailed analysis of the hydro-meteorological forcing and the hydrological consequences of this event. A specific approach, the "forensic hydrological analysis" was followed in order to include and combine retrospectively a variety of data from different disciplines. Such an approach investigates the origins, mechanisms and course of such natural events if possible in a "near real time" mode, in order to follow the most recent traces of the event. The results show that it was a very rare rainfall event with extreme intensities which, in combination with catchment properties, led to extreme runoff plus severe geomorphological hazards, i.e. great debris flows, which together resulted in immense damage in this small rural town Braunsbach. It was definitely a record-breaking event and greatly exceeded existing design guidelines for extreme flood discharge for this region, i.e. by a factor of about 10. Being such a rare or even unique event, it is not reliably feasible to put it into a crisp probabilistic context. However, one can conclude that a return period clearly above 100 years can be assigned for all event components: rainfall, peak discharge and sediment transport. Due to the complex and interacting processes, no single flood cause or reason for the very high damage can be identified, since only the interplay and the cascading characteristics of those led to such an event. The roles of different human activities on the origin and/or intensification of such an extreme event are finally discussed. (C) 2018 Elsevier B.V. All rights reserved.
This paper presents the results of a research aimed to quantify suspended sediment transport in three experimental catchments in southern Chile, to compare measured suspended sediment load with estimated erosion using the Universal Soil Loss Equation (USLE) applied in a GIS environment and to validate de Modified Universal Soil Loss Equation (MUSLE) used to estimate suspended sediment loads from forest catchments. The catchments are Los Pinos (94.2 ha), Los Ulmos 1 (12.6 ha) and Los Ulmos 2 (17.7 ha). Soil losses estimated with USLE for the three catchments are higher than those measured in runoff experimental lots under bare soil conditions, which could indicate an overestimation of the LS calculated in GIS and the fact that the USLE model does not compute sediment deposit and storage within the catchment. A statistical significant relation was found between measured and estimated (MUSLE) suspended sediment load, which would indicate that this model could be applied to estimate suspended sediment load from small catchments in southern Chile.
In the field of hydrological modeling, many alternative representations of natural processes exist. Choosing specific process formulations when building a hydrological model is therefore associated with a high degree of ambiguity and subjectivity. In addition, the numerical integration of the underlying differential equations and parametrization of model structures influence model performance. Identifiability analysis may provide guidance by constraining the a priori range of alternatives based on observations. In this work, a flexible simulation environment is used to build an ensemble of semidistributed, process-based hydrological model configurations with alternative process representations, numerical integration schemes, and model parametrizations in an integrated manner. The flexible simulation environment is coupled with an approach for dynamic identifiability analysis. The objective is to investigate the applicability of the framework to identify the most adequate model. While an optimal model configuration could not be clearly distinguished, interesting results were obtained when relating model identifiability with hydro-meteorological boundary conditions. For instance, we tested the Penman-Monteith and Shuttleworth & Wallace evapotranspiration models and found that the former performs better under wet and the latter under dry conditions. Parametrization of model structures plays a dominant role as it can compensate for inadequate process representations and poor numerical solvers. Therefore, it was found that numerical solvers of high order of accuracy do often, though not necessarily, lead to better model performance. The proposed coupled framework proved to be a straightforward diagnostic tool for model building and hypotheses testing and shows potential for more in-depth analysis of process implementations and catchment functioning.
This paper investigates the transferability of calibrated HBV model parameters under stable and contrasting conditions in terms of flood seasonality and flood generating processes (FGP) in five Norwegian catchments with mixed snowmelt/rainfall regimes. We apply a series of generalized (differential) split-sample tests using a 6-year moving window over (i) the entire runoff observation periods, and (ii) two subsets of runoff observations distinguished by the seasonal occurrence of annual maximum floods during either spring or autumn. The results indicate a general model performance loss due to the transfer of calibrated parameters to independent validation periods of -5 to -17%, on average. However, there is no indication that contrasting flood seasonality exacerbates performance losses, which contradicts the assumption that optimized parameter sets for snowmelt-dominated floods (during spring) perform particularly poorly on validation periods with rainfall-dominated floods (during autumn) and vice versa.
In a study from 2008, Lariviere and colleagues showed, for the field of natural sciences and engineering, that the median age of cited references is increasing over time. This result was considered counterintuitive: with the advent of electronic search engines, online journal issues and open access publications, one could have expected that cited literature is becoming younger. That study has motivated us to take a closer look at the changes in the age distribution of references that have been cited in water resources journals since 1965. Not only could we confirm the findings of Lariviere and colleagues. We were also able to show that the aging is mainly happening in the oldest 10-25% of an average reference list. This is consistent with our analysis of top-cited papers in the field of water resources. Rankings based on total citations since 1965 consistently show the dominance of old literature, including text books and research papers in equal shares. For most top-cited old-timers, citations are still growing exponentially. There is strong evidence that most citations are attracted by publications that introduced methods which meanwhile belong to the standard toolset of researchers and practitioners in the field of water resources. Although we think that this trend should not be overinterpreted as a sign of stagnancy, there might be cause for concern regarding how authors select their references. We question the increasing citation of textbook knowledge as it holds the risk that reference lists become overcrowded, and that the readability of papers deteriorates.
Many semi-arid regions are characterised by water scarcity and vulnerability of natural resources, pronounced climatic variability and social stress. Integrated studies including climatotogy, hydrology, and socio-econornic studies are required both for analysing the dynamic natural conditions and to assess possible strategies to make semi-arid regions Less vulnerable to the present and changing climate. The model introduced here dynamically describes the retationships between climate forcing, water availability, agriculture and selected societal processes. The model has been tailored to simulate the rather complex situation in the semi-and north-eastern Brazil in a quantitative manner including the sensitivity to external forcing, such as climate change. The selected results presented show the general functioning of the integrated model, with a primary focus on climate change impacts. It becomes evident that due to Large differences in regional climate scenarios, it is still impossible to give quantitative values for the most probable development, e.g., to assign probabilities to the simulated results. However, it becomes clear that water is a very crucial factor, and that an efficient and ecologically sound water management is a key question for the further development of that semi-arid region. The simulation results show that, independent of the differences in climate change scenarios, rain-fed farming is more vulnerable to drought impacts compared to irrigated farming. However, the capacity of irrigation and other water infrastructure systems to enhance resilience in respect to climatic fluctuations is significantly constrained given a significant negative precipitation trend. (c) 2005 Elsevier B.V. All rights reserved.
Wetlands, and in particular riparian wetlands, represent an interface between the catchment area and the aquatic environment. They control the exchange of water and related chemical fluxes from the upper catchment area to surface waters like streams and lakes. Their influence on water and nutrient balances has been investigated mainly at the patch scale. In this study an attempt was made (a) to integrate riparian zones and wetlands into eco-hydrological river basin modelling, and (b) to quantify the impacts of riparian wetland processes on water and nutrient fluxes in a meso-scale catchment located in the northeastern German lowland. The investigation was performed by analysing hydro-chemical field data and applying the eco-hydrological model SWIM (Soil and Water Integrated Model), which was extended to reproduce the relevant water and nutrient flows and retention processes at the catchment scale in general, and in riparian zones and wetlands in particular. The main extensions introduced in the model were: (1) implementation of daily groundwater table dynamics at the hydrotope level, (2) implementation of water and nutrient uptake by plants from groundwater in riparian zones and wetlands, and (3) assessment of nutrient retention in groundwater and interflow. The simulation results indicate that wetlands, though they represent relatively small parts of the total catchment area, may have a significant impact on the overall water and nutrient balances of the catchment. The uncertainty of the simulation results is considerably high, with the main sources of uncertainty being the model parameters representing the geo-hydrology and the input data for land use management. (c) 2006 Elsevier B.V. All rights reserved.
The hydrological cycle is a dynamic system by its nature, but sometimes accelerated through anthropogenic activity. A "hydrological change" (i.e. a water cycle that is significantly changing over a longer period of time) can be very different in character, depending on the specific natural conditions and the underlying spatial and temporal scales. Such changes may affect the availability and quality of water as essential pre-requisites for human development and ecosystem stability. Hydrological extremes, such as floods and droughts, may also be affected, what is also vitally important, because of their profound economic and societal impacts. Anthropogenically induced hydrological change can be attributed to three main external causes: first, the Earth's climate is changing significantly and thus directly affecting the terrestrial hydro-systems via the exchange of energy and heat. The second major issue is the land cover and its management that has been modified fundamentally by conversion of land for agriculture, forestry, and other purposes such as industrialisation and urbanisation. Finally, water resources are being used more than ever for human development, especially for agriculture, industrial activities, and navigation. If the regional terrestrial hydrological cycle is changing and counter-measures are desirable, it is from a scientific perspective mandatory to understand the extent and nature of such changes, and, especially, to identify their possible anthropogenic origin. There are, however, fundamental gaps in our knowledge, in particular about the role of feedbacks between individual processes and compartments of the hydrological cycle or the relevance of the interactions with other sub-systems of our planet, such as the atmosphere or the vegetation. This paper mentions several examples of hydrological change and discusses their identification, interaction processes, and feedback mechanisms, along with modelling issues. The possibilities and limitations of modelling are demonstrated by means of two studies: one from the river-lake system on the Middle-Havel River and one from the catchment of the Wahnbach Reservoir. The applied model systems comprise a series of consecutively coupled individual models (so-called one-way-coupling). Model systems that are able reflect feedback effects (two-way- coupling) are still in the development stage. It became clear that the applied model systems were able to reproduce the observed dynamics of the hydrological cycle and of selected matter fluxes. However, one has to be aware that the simulated time periods and scenarios represent rather moderately transient conditions, what is the justification why the one-way-coupling seems to be applicable. Furthermore, it was shown that the modelling uncertainty is considerably large. Nevertheless, this uncertainty can be distinguished from effects of changed internal systems dynamics or from changed boundary conditions, what is a basis for the usability of such model systems for prognostic purposes.
Interception measurements and assessment of Gash model performance for a tropical semi-arid region
(2009)
Semi-arid environments usually face water scarcity and conflicts for its use; therefore a complete understanding of the water balance in these regions is desired. To evaluate interception, measurements of precipitation, throughfall and stemflow were carried out in a Brazilian tropical semi-arid experimental watershed with well preserved Caatinga vegetation. Data analysis indicates that interception losses correspond to 13% of total rainfall, representing an important process in the watershed's water balance, where runoff is only 6% of total precipitation. Gash interception model was applied in the region with good results for long term simulation. Nevertheless, the model produced significant but not systematic errors on a daily basis. This was attributed to its incapability of representing the temporal variation of precipitation during the event, which is a major factor affecting interception. Rainfall intensity was shown to be a good parameter to determine an applicability threshold for Gash model in the study area.
Both Alpine and Mediterranean areas are considered sensitive to so-called global change, considered as the combination of climate and land use changes. All panels on climate evolution predict future scenarios of increasing frequency and magnitude of floods which are likely to lead to huge geomorphic adjustments of river channels so major metamorphosis of fluvial systems is expected as a result of global change. Such pressures are likely to give rise to major ecological and economic changes and challenges that governments need to address as a matter of priority. Changes in river flow regimes associated with global change are therefore ushering in a new era, where there is a critical need to evaluate hydro-geomorphological hazards from headwaters to lowland areas (flooding can be not just a problem related to being under the water). A key question is how our understanding of these hazards associated with global change can be improved; improvement has to come from integrated research which includes the climatological and physical conditions that could influence the hydrology and sediment generation and hence the conveyance of water and sediments (including the river’s capacity, i.e. amount of sediment, and competence, i.e. channel deformation) and the vulnerabilities and economic repercussions of changing hydrological hazards (including the evaluation of the hydro-geomorphological risks too).
Within this framework, the purpose of this international symposium is to bring together researchers from several disciplines as hydrology, fluvial geomorphology, hydraulic engineering, environmental science, geography, economy (and any other related discipline) to discuss the effects of global change over the river system in relation with floods. The symposium is organized by means of invited talks given by prominent experts, oral lectures, poster sessions and discussion sessions for each individual topic; it will try to improve our understanding of how rivers are likely to evolve as a result of global change and hence address the associated hazards of that fluvial environmental change concerning flooding.
Four main topics are going to be addressed:
- Modelling global change (i.e. climate and land-use) at relevant spatial (regional, local) and temporal (from the long-term to the single-event) scales.
- Measuring and modelling river floods from the hydrological, sediment transport (both suspended and bedload) and channel morphology points of view at different spatial (from the catchment to the reach) and temporal (from the long-term to the single-event) scales.
- Evaluation and assessment of current and future river flooding hazards and risks in a global change perspective.
- Catchment management to face river floods in a changing world.
We are very pleased to welcome you to Potsdam. We hope you will enjoy your participation at the International Symposium on the Effects of Global Change on Floods, Fluvial Geomorphology and Related Hazards in Mountainous Rivers and have an exciting and profitable experience. Finally, we would like to thank all speakers, participants, supporters, and sponsors for their contributions that for sure will make of this event a very remarkable and fruitful meeting. We acknowledge the valuable support of the European Commission (Marie Curie Intra-European Fellowship, Project ‘‘Floodhazards’’, PIEF-GA-2013-622468, Seventh EU Framework Programme) and the Deutschen Forschungsgemeinschaft (Research Training Group “Natural Hazards and Risks in a Changing World” (NatRiskChange; GRK 2043/1) as the symposium would not have been possible without their help. Without your cooperation, this symposium would not be either possible or successful.
The characteristics of a landscape pose essential factors for hydrological processes. Therefore, an adequate representation of the landscape of a catchment in hydrological models is vital. However, many of such models exist differing, amongst others, in spatial concept and discretisation. The latter constitutes an essential pre-processing step, for which many different algorithms along with numerous software implementations exist. In that context, existing solutions are often model specific, commercial, or depend on commercial back-end software, and allow only a limited or no workflow automation at all. Consequently, a new package for the scientific software and scripting environment R, called lumpR, was developed. lumpR employs an algorithm for hillslope-based landscape discretisation directed to large-scale application via a hierarchical multi-scale approach. The package addresses existing limitations as it is free and open source, easily extendible to other hydrological models, and the workflow can be fully automated. Moreover, it is user-friendly as the direct coupling to a GIS allows for immediate visual inspection and manual adjustment. Sufficient control is furthermore retained via parameter specification and the option to include expert knowledge. Conversely, completely automatic operation also allows for extensive analysis of aspects related to landscape discretisation. In a case study, the application of the package is presented. A sensitivity analysis of the most important discretisation parameters demonstrates its efficient workflow automation. Considering multiple streamflow metrics, the employed model proved reasonably robust to the discretisation parameters. However, parameters determining the sizes of subbasins and hillslopes proved to be more important than the others, including the number of representative hillslopes, the number of attributes employed for the lumping algorithm, and the number of sub-discretisations of the representative hillslopes.
The characteristics of a landscape pose essential factors for hydrological processes. Therefore, an adequate representation of the landscape of a catchment in hydrological models is vital. However, many of such models exist differing, amongst others, in spatial concept and discretisation. The latter constitutes an essential pre-processing step, for which many different algorithms along with numerous software implementations exist. In that context, existing solutions are often model specific, commercial, or depend on commercial back-end software, and allow only a limited or no workflow automation at all.
Consequently, a new package for the scientific software and scripting environment R, called lumpR, was developed. lumpR employs an algorithm for hillslope-based landscape discretisation directed to large-scale application via a hierarchical multi-scale approach. The package addresses existing limitations as it is free and open source, easily extendible to other hydrological models, and the workflow can be fully automated. Moreover, it is user-friendly as the direct coupling to a GIS allows for immediate visual inspection and manual adjustment. Sufficient control is furthermore retained via parameter specification and the option to include expert knowledge. Conversely, completely automatic operation also allows for extensive analysis of aspects related to landscape discretisation.
In a case study, the application of the package is presented. A sensitivity analysis of the most important discretisation parameters demonstrates its efficient workflow automation. Considering multiple streamflow metrics, the employed model proved reasonably robust to the discretisation parameters. However, parameters determining the sizes of subbasins and hillslopes proved to be more important than the others, including the number of representative hillslopes, the number of attributes employed for the lumping algorithm, and the number of sub-discretisations of the representative hillslopes.
The characteristics of a landscape pose essential factors for hydrological processes. Therefore, an adequate representation of the landscape of a catchment in hydrological models is vital. However, many of such models exist differing, amongst others, in spatial concept and discretisation. The latter constitutes an essential pre-processing step, for which many different algorithms along with numerous software implementations exist. In that context, existing solutions are often model specific, commercial, or depend on commercial back-end software, and allow only a limited or no workflow automation at all.
Consequently, a new package for the scientific software and scripting environment R, called lumpR, was developed. lumpR employs an algorithm for hillslope-based landscape discretisation directed to large-scale application via a hierarchical multi-scale approach. The package addresses existing limitations as it is free and open source, easily extendible to other hydrological models, and the workflow can be fully automated. Moreover, it is user-friendly as the direct coupling to a GIS allows for immediate visual inspection and manual adjustment. Sufficient control is furthermore retained via parameter specification and the option to include expert knowledge. Conversely, completely automatic operation also allows for extensive analysis of aspects related to landscape discretisation.
In a case study, the application of the package is presented. A sensitivity analysis of the most important discretisation parameters demonstrates its efficient workflow automation. Considering multiple streamflow metrics, the employed model proved reasonably robust to the discretisation parameters. However, parameters determining the sizes of subbasins and hillslopes proved to be more important than the others, including the number of representative hillslopes, the number of attributes employed for the lumping algorithm, and the number of sub-discretisations of the representative hillslopes.
Meteorological and hydrological drought assessment in Lake Malawi and Shire River basins (1970-2013)
(2020)
The study assesses the variability and trends of both meteorological and hydrological droughts from 1970 to 2013 in Lake Malawi and Shire River basins using the standardized precipitation index (SPI) and standardized precipitation and evaporation index (SPEI) for meteorological droughts and the lake level change index (LLCI) for hydrological droughts. Trends and slopes in droughts and drought drivers are estimated using Mann-Kendall test and Sen's slope, respectively. Results suggest that meteorological droughts are increasing due to a decrease in precipitation which is exacerbated by an increase in temperature (potential evapotranspiration). The hydrological system of Lake Malawi seems to have a >24-month memory towards meteorological conditions, since the 36-month SPEI can predict hydrological droughts 10 months in advance. The study has found the critical lake level that would trigger hydrological drought to be 474.1 m a.s.l. The increase in drought is a concern as this will have serious impacts on water resources and hydropower supply in Malawi.
Model-Based attribution of high-resolution streamflow trends in two alpine basins of Western Austria
(2017)
Several trend studies have shown that hydrological conditions are changing considerably in the Alpine region. However, the reasons for these changes are only partially understood and trend analyses alone are not able to shed much light. Hydrological modelling is one possible way to identify the trend drivers, i.e., to attribute the detected streamflow trends, given that the model captures all important processes causing the trends. We modelled the hydrological conditions for two alpine catchments in western Austria (a large, mostly lower-altitude catchment with wide valley plains and a nested high-altitude, glaciated headwater catchment) with the distributed, physically-oriented WaSiM-ETH model, which includes a dynamical glacier module. The model was calibrated in a transient mode, i.e., not only on several standard goodness measures and glacier extents, but also in such a way that the simulated streamflow trends fit with the observed ones during the investigation period 1980 to 2007. With this approach, it was possible to separate streamflow components, identify the trends of flow components, and study their relation to trends in atmospheric variables. In addition to trends in annual averages, highly resolved trends for each Julian day were derived, since they proved powerful in an earlier, data-based attribution study. We were able to show that annual and highly resolved trends can be modelled sufficiently well. The results provide a holistic, year-round picture of the drivers of alpine streamflow changes: Higher-altitude catchments are strongly affected by earlier firn melt and snowmelt in spring and increased ice melt throughout the ablation season. Changes in lower-altitude areas are mostly caused by earlier and lower snowmelt volumes. All highly resolved trends in streamflow and its components show an explicit similarity to the local temperature trends. Finally, results indicate that evapotranspiration has been increasing in the lower altitudes during the study period.
Taking into account the climatic conditions of the semiarid region of Brazil, with its intermittent rivers and long periods of water scarcity, a dense network of surface reservoirs (on average one dam every 5 km(2)) of very different sizes has been built. The impact of such a network on water and sediment dynamics constitutes a remarkable challenge for hydrologists. The main objective of this work is to present a novel way of simulating water and sediment fluxes through such high-density reservoir networks, which enables the assessment of water and sediment retention in those structures. The new reservoir modeling approach has been coupled with the fully process-oriented and semidistributed hydrological WASA-SED model, which was tailored for semiarid hydroclimatological characteristics. This integrated modeling system was applied to the 933-km(2) Bengue catchment, located in semiarid northeastern Brazil, which has a network of 114 reservoirs with a wide range of surface areas (from 0.003 to 350 ha). The small reservoirs were grouped into size classes according to their storage capacity and a cascade routing scheme was applied to describe the upstream-downstream position of the classes; the large reservoirs were handled explicitly in the reservoir modeling approach. According to the model results, the proposed approach is capable of representing the water and sediment fluxes though the entire reservoir network with reasonable accuracy. In addition, the model shows that the dynamics of water and sediment within the Bengue catchment are strongly impacted by the presence of multiple reservoirs, which are able to retain approximately 21% of the generated runoff and almost 42% of the sediment yield of the catchment for the simulation period, from 2000 to 2012. (C) 2018 American Society of Civil Engineers.
The Southern Pre-Pyrenees experienced a substantial land-use change over the second half of the 20th century owing to the reduction of agricultural activities towards the formation of a more natural forest landscape. The land-use change over the last 50 years with subsequent effects on water and sediment export was modelled with the process-based, spatially semi-distributed WASA-SED model for the meso-scale Canalda catchment in Catalonia, Spain. It was forwarded that the model yielded plausible results for runoff and sediment yield dynamics without the need of calibration, although the model failed to reproduce the shape of the hydrograph and the total discharge of several individual rainstorm events, hence the simulation capabilities are not yet considered sufficient for decision-making purposes for land management. As there are only a very limited amount of measured data available on sediment budgets with altered land-use and climate change settings, the WASA-SED model was used to obtain qualitative estimates on the effects of past and future change scenarios to derive a baseline for hypothesis building and future discussion on the evolution of sediment budgets in such a dryland setting. Simulating the effects of the past land-use change, the model scenarios resulted in a decrease of up to 75% of the annual sediment yield. whereas modelled runoff remained almost constant over the last 50 years. The relative importance of environmental change was evaluated by comparing the impact on sediment export of land-use change, that are driven by socio-economic factors, with climate change projections for changes in the rainfall regime. The modelling results suggest that a 20% decrease in annual rainfall results in a decrease in runoff and sediment yield, thus an ecosystem stabilisation in regard to sediment export which can only be achieved by a substantial land-use change equivalent to a complete afforestation. At the same time, a 20% increase in rainfall causes a large export of water and sediment resources out of the catchment, equivalent to an intensive agricultural use of 100% of the catchment area. For wet years, the effects of agricultural intensification are more pronounced, so that in this case the intensive land-use change has a significantly larger impact on sediment generation than climate change. The WASA-SED model proved capable in quantifying the impacts of actual and potential environmental change, but the reliability of the simulation results is still circumscribed by considerable parameterisation and model uncertainties.