Refine
Has Fulltext
- no (227) (remove)
Year of publication
- 2015 (227) (remove)
Document Type
- Article (203)
- Doctoral Thesis (10)
- Review (4)
- Other (3)
- Monograph/Edited Volume (2)
- Habilitation Thesis (2)
- Preprint (2)
- Conference Proceeding (1)
Is part of the Bibliography
- yes (227) (remove)
Keywords
- Holocene (6)
- India-Asia collision (3)
- Ostracoda (3)
- Seismicity and tectonics (3)
- climate change (3)
- China (2)
- Dynamics: seismotectonics (2)
- Earthquake source observations (2)
- East Africa (2)
- Element mobility (2)
Institute
- Institut für Geowissenschaften (227) (remove)
Previous studies suggested that electric and/or magnetic field fluctuations observed in the nighttime topside ionosphere at midlatitudes generally originate from quiet time nocturnal medium-scale traveling ionospheric disturbances (MSTIDs). However, decisive evidences for the connection between the two have been missing. In this study we make use of the multispacecraft observations of midlatitude magnetic fluctuations (MMFs) in the nighttime topside ionosphere by the Swarm constellation. The analysis results show that the area hosting MMFs is elongated in the NW-SE (NE-SW) direction in the Northern (Southern) Hemisphere. The elongation direction and the magnetic field polarization support that the area hosting MMFs is nearly field aligned. All these properties of MMFs suggest that they have close relationship with MSTIDs. Expectation values of root-mean-square field-aligned currents associated with MMFs are up to about 4nA/m(2). MMF coherency significantly drops for longitudinal distances of 1 degrees.
Permafrost inundated since the last glacial maximum is degrading, potentially releasing trapped or stabilized greenhouse gases, but few observations of the depth of ice-bonded permafrost (IBP) below the seafloor exist for most of the arctic continental shelf. We use spectral ratios of the ambient vibration seismic wavefield, together with estimated shear wave velocity from the dispersion curves of surface waves, for estimating the thickness of the sediment overlying the IBP. Peaks in spectral ratios modeled for three-layered 1-D systems correspond with varying thickness of the unfrozen sediment. Seismic receivers were deployed on the seabed around Muostakh Island in the central Laptev Sea, Siberia. We derive depths of the IBP between 3.7 and 20.7m15%, increasing with distance from the shoreline. Correspondence between expected permafrost distribution, modeled response, and observational data suggests that the method is promising for the determination of the thickness of unfrozen sediment.
Information on extreme precipitation for future climate is needed to assess the changes in the frequency and intensity of flooding. The primary source of information in climate change impact studies is climate model projections. However, due to the coarse resolution and biases of these models, they cannot be directly used in hydrological models. Hence, statistical downscaling is necessary to address climate change impacts at the catchment scale.
This study compares eight statistical downscaling methods (SDMs) often used in climate change impact studies. Four methods are based on change factors (CFs), three are bias correction (BC) methods, and one is a perfect prognosis method. The eight methods are used to downscale precipitation output from 15 regional climate models (RCMs) from the ENSEMBLES project for 11 catchments in Europe. The overall results point to an increase in extreme precipitation in most catchments in both winter and summer. For individual catchments, the downscaled time series tend to agree on the direction of the change but differ in the magnitude. Differences between the SDMs vary between the catchments and depend on the season analysed. Similarly, general conclusions cannot be drawn regarding the differences between CFs and BC methods. The performance of the BC methods during the control period also depends on the catchment, but in most cases they represent an improvement compared to RCM outputs. Analysis of the variance in the ensemble of RCMs and SDMs indicates that at least 30% and up to approximately half of the total variance is derived from the SDMs. This study illustrates the large variability in the expected changes in extreme precipitation and highlights the need for considering an ensemble of both SDMs and climate models. Recommendations are provided for the selection of the most suitable SDMs to include in the analysis.
Sea-surface temperatures (SSTs) based on radiolarian assemblage changes are estimated for the last 160 kyr, from a sediment core (Y9) recovered from Pukaki Saddle, northeast of Campbell Plateau. Site Y9 lies beneath Subantarctic Surface Water (SAW) immediately to the north of the Subantarctic Front (SAF), which in this region is bathymetrically constrained by the edges of Campbell Plateau and defines the northern boundary of the Antarctic Circumpolar Current (ACC). Radiolarian assemblages are characterised by an exceptionally high abundance of the Antarctic to subantarctic species Antarctissa spp. (up to 68%), especially during glacial intervals. SST estimates are derived using Factor Analysis and the Modern Analog Technique. Both methods capture the glacial-interglacial (G-I) pattern. The SST reconstructions show the changing relative influence of distinct water masses during the past G-I cycle, with major temperature variations of the order of 7-9 degrees C at glacial Terminations. Glacials (marine isotope stages (MIS) 6 and 2) are associated with particularly cool SSTs that are indicative of a more vigorous SAF/ACC and an enhancement of the inflow through Pukaki Saddle and/or frequent development of cold-core eddies at the SAF. By contrast, the influence of warmer waters and relaxation of the ACC during interglacials can be inferred from temperatures slightly warmer (e.g., mid-Holocene) and/or comparable to present day (e.g., MIS 5e). During these intervals, relatively warmer temperatures most likely indicate a higher warmcore eddy activity due to a strengthened Subtropical Front and/or a weakened inflow of cool water through Pukaki Saddle and/or an increased stratification in the Campbell Plateau region. Furthermore, the SST record is characterised by an abrupt warming at ca. 10 kyr (i.e., Termination l), the occurrence of a reversal at Termination I, and a warming event at the end of MIS 4, coinciding with the A4 event in the Byrd ice core. These characteristics, together with the pronounced G-I cycle shown by the SST estimates, suggest that Site Y9 is influenced by major oceanographic changes in the SW Pacific and responds to thermal changes at high southern latitudes. (C) 2014 Elsevier B.V. All rights reserved.
High resolution isotopic (delta O-18 and delta C-13) investigations on endogenic carbonates (calcite/aragonite) from Tso Moriri Lake, NW Himalaya show dramatic fluctuations during the late glacial and the early Holocene, and a persistent enrichment trend during the late Holocene. Changes in this lake are largely governed by the [input (meltwater + monsoon precipitation)/evaporationj (WE) ratio, also reflected in changes in the carbonate mineralogy with aragonite being formed during periods of lowest I/E. Using new isotopic data on endogenic carbonates in combination with the available data on geochemistry, mineralogy, and reconstructed mean annual precipitation, we demonstrate that the late glacial and early Holocene carbonate delta O-18 variability resulted from fluctuating Indian summer monsoon (ISM) precipitation in NW Himalaya. This region experienced increasing ISM precipitation between ca. 13.1 and 11.7 cal ka and highest ISM precipitation during the early Holocene (11.2-8.5 cal ka). However, during the late Holocene, evaporation was the dominant control on the carbonate delta O-18. Regional comparison of reconstructed hydrological changes from Tso Moriri Lake with other archives from the Asian summer monsoon and westerlies domain shows that the intensified westerly influence that resulted in higher lake levels (after 8 cal ka) in central Asia was not strongly felt in NW Himalaya. (C) 2015 Elsevier B.V. All rights reserved.
Combinations of runoff characteristics are commonly used to represent distinct conceptual models of stormflow generation. In this study, three runoff characteristics: hydrograph response, time source of runoff water, and flow path are used to classify catchments. Published data from the scientific literature are used to provide evidence from small, forested catchments. Each catchment was assigned to one of the eight conceptual models, depending on the combination of quick/slow response, old/new water, and overland/subsurface flow. A standard procedure was developed to objectively diagnose the predominant conceptual model of stormflow generation for each catchment and assess its temporal and spatial support. The literature survey yielded 42 catchments, of which 30 catchments provide a complete set of qualitative runoff characteristics resulting in one of the eight conceptual models. The majority of these catchments classify as subsurface flow path dominated. No catchments were found for conceptual models representing combinations of quick response-new water-subsurface flow (SSF), slow-new-SSF, slow-old-overland flow (OF) nor new-slow-OF. Of the 30 qualitatively classified catchments, 24 provide a complete set of quantitative measures. In summary, the field support is strong for 19 subsurface-dominated catchments and is weak for 5 surface flow path dominated catchments (six catchments had insufficient quantitative data). Two alternative explanations exist for the imbalance of field support between the two flow path classes: (1) the selection of research catchments in past field studies was mainly to explain quick hydrograph response in subsurface dominated catchments; (2) catchments with prevailing subsurface flow paths are more common in nature. We conclude that the selection of research catchments needs to cover a wider variety of environmental conditions which should lead to a broader, and more widely applicable, spectrum of resulting conceptual models and process mechanisms. This is a prerequisite in studies where catchment organization and similarity approaches are used to develop catchment classification systems in order to regionalize stormflow.
Remnants of hydrous melt formed at mantle depths have been identified and characterized within high-pressure leucogranulites of the Orlica-Snieznik Dome (Bohemian Massif, central Europe). They occur as nanogranites in garnet formed via partial melting of granitoids during the Variscan orogeny. Melt composition and H2O content have been investigated in situ after experimental re-homogenization of the nanogranites, and are consistent with melts produced experimentally from crustal lithologies at mantle depths. This is the first geochemical study of melt inclusions from natural crustal rocks equilibrated close to the stability field of coesite, shedding light on how continental crust melts during deep subduction. Whereas decompressional melting is commonly invoked for deeply subducted crustal lithologies, melting occurred near or at the metamorphic peak pressure in the Orlica-Snieznik granulites. Melting of deeply subducted crustal rocks significantly modifies the rheology and thus promotes fast exhumation: this process has a critical influence on the geodynamic evolution of subduction-collision orogens as well as crustal differentiation at depth.
Hyperspectral REE (Rare Earth Element) Mapping of Outcrops-Applications for Neodymium Detection
(2015)
In this study, an in situ application for identifying neodymium (Nd) enriched surface materials that uses multitemporal hyperspectral images is presented (HySpex sensor). Because of the narrow shape and shallow absorption depth of the neodymium absorption feature, a method was developed for enhancing and extracting the necessary information for neodymium from image spectra, even under illumination conditions that are not optimal. For this purpose, the two following approaches were developed: (1) reducing noise and analyzing changing illumination conditions by averaging multitemporal image scenes and (2) enhancing the depth of the desired absorption band by deconvolving every image spectrum with a Gaussian curve while the rest of the spectrum remains unchanged (Richardson-Lucy deconvolution). To evaluate these findings, nine field samples from the Fen complex in Norway were analyzed using handheld X-ray fluorescence devices and by conducting detailed laboratory-based geochemical rare earth element determinations. The result is a qualitative outcrop map that highlights zones that are enriched in neodymium. To reduce the influences of non-optimal illumination, particularly at the studied site, a minimum of seven single acquisitions is required. Sharpening the neodymium absorption band allows for robust mapping, even at the outer zones of enrichment. From the geochemical investigations, we found that iron oxides decrease the applicability of the method. However, iron-related absorption bands can be used as secondary indicators for sulfidic ore zones that are mainly enriched with rare earth elements. In summary, we found that hyperspectral spectroscopy is a noninvasive, fast and cost-saving method for determining neodymium at outcrop surfaces.
We study segregation of the subducted oceanic crust (OC) at the core-mantle boundary and its ability to accumulate and form large thermochemical piles (such as the seismically observed Large Low Shear Velocity Provinces (LLSVPs)). Our high-resolution numerical simulations of thermochemical mantle convection suggest that the longevity of LLSVPs for up to three billion years, and possibly longer, can be ensured by a balance in the rate of segregation of high-density OC material to the core-mantle boundary (CMB) and the rate of its entrainment away from the CMB by mantle upwellings. For a range of parameters tested in this study, a large-scale compositional anomaly forms at the CMB, similar in shape and size to the LLSVPs. Neutrally buoyant thermochemical piles formed by mechanical stirringwhere thermally induced negative density anomaly is balanced by the presence of a fraction of dense anomalous materialbest resemble the geometry of LLSVPs. Such neutrally buoyant piles tend to emerge and survive for at least 3Gyr in simulations with quite different parameters. We conclude that for a plausible range of values of density anomaly of OC material in the lower mantleit is likely that it segregates to the CMB, gets mechanically mixed with the ambient material, and forms neutrally buoyant large-scale compositional anomalies similar in shape to the LLSVPs.
A SSHAC Level 3 Probabilistic Seismic Hazard Analysis for a New-Build Nuclear Site in South Africa
(2015)
A probabilistic seismic hazard analysis has been conducted for a potential nuclear power plant site on the coast of South Africa, a country of low-to-moderate seismicity. The hazard study was conducted as a SSHAC Level 3 process, the first application of this approach outside North America. Extensive geological investigations identified five fault sources with a non-zero probability of being seismogenic. Five area sources were defined for distributed seismicity, the least active being the host zone for which the low recurrence rates for earthquakes were substantiated through investigations of historical seismicity. Empirical ground-motion prediction equations were adjusted to a horizon within the bedrock at the site using kappa values inferred from weak-motion analyses. These adjusted models were then scaled to create new equations capturing the range of epistemic uncertainty in this region with no strong motion recordings. Surface motions were obtained by convolving the bedrock motions with site amplification functions calculated using measured shear-wave velocity profiles.
Pseudotachylitic breccia (PTB) in the form of cm-wide melt breccia veinlets locally occurs on the exposed central uplift of the 380Ma Siljan impact structure. The host rock to the PTBs is the so-called Jarna granite of quartz monzonitic to syenodioritic composition. The nearly 603m long BH-5 drill core from Hattberg, near the centre of the Siljan central uplift, contains numerous veins and pods of PTB. In particular, two major zones of 60m combined width contain extensive PTB network breccias (30% actual melt breccia component), with individual melt breccia occurrences up to >1m in length. Core logging and petrographic and geochemical analysis of the core have been performed, and the data are interpreted to suggest the following. (1) The impact event caused low to moderate (at essentially <20GPa) shock deformation in the host rock and in clasts of this lithology within the PTB. (2) Macroscopic deformation of the basement mainly comprises fracturing, with only localised cataclasis. (3) No evidence for shock melting (i.e. compression/decompression melting early in the cratering process) could be observed. (4) Optical and scanning electron microscopy showed that dark PTB contains a definite melt component. (5) Shearing has significantly affected this part of the central uplift, but its effects are limited to very short displacements and likely did not result in extensive melting. (6) A frictional heating component upon melt generation can, however, not be excluded, as many PTB samples contain clasts of a mafic (gabbroic) component, although only in one place along the entire core, a 1.2cm-wide section through such material in direct contact to host rock was observed. Consequently, we suggest that, upon uplift in the central part of the impact structure, considerable melt volumes were generated locally, especially in areas that had been affected by extensive cataclasis and where grain size comminution favoured melt formation. Rapid decompression related to central uplift formation is the preferred process for the generation of the PTB melt breccias.
The Earth's biggest magmatic events are believed to originate from massive melting when hot mantle plumes rising from the lowermost mantle reach the base of the lithosphere. Classical models predict large plume heads that cause kilometre-scale surface uplift, and narrow (100 km radius) plume tails that remain in the mantle after the plume head spreads below the lithosphere. However, in many cases, such uplifts and narrow plume tails are not observed. Here using numerical models, we show that the issue can be resolved if major mantle plumes contain up to 15-20% of recycled oceanic crust in a form of dense eclogite, which drastically decreases their buoyancy and makes it depth dependent. We demonstrate that, despite their low buoyancy, large enough thermochemical plumes can rise through the whole mantle causing only negligible surface uplift. Their tails are bulky (4200 km radius) and remain in the upper mantle for 100 millions of years.
Several solutions have been proposed to explain the long-standing kinematic observation that postcollisional upper crustal shortening within the Himalaya and Asia is much less than the magnitude of India-Asia convergence. Here we implement these hypotheses in global plate reconstructions and test paleolatitudes predicted by the global apparent polar wander path against independent, and the most robust paleomagnetic data. Our tests demonstrate that (1) reconstructed 600-750km postcollisional intra-Asian shortening is a minimum value; (2) a 52Ma collision age is only consistent with paleomagnetic data if intra-Asian shortening was 900km; a 56-58Ma collision age requires greater intra-Asian shortening; (3) collision ages of 34 or 65Ma incorrectly predict Late Cretaceous and Paleogene paleolatitudes of the Tibetan Himalaya (TH); and (4) Cretaceous counterclockwise rotation of India cannot explain the paleolatitudinal divergence between the TH and India. All hypotheses, regardless of collision age, require major Cretaceous extension within Greater India.
Faulting processes in volcanic areas result from a complex interaction of pressurized fluid-filled cracks and conduits with the host rock and local and regional tectonic setting. Often, volcanic seismicity is difficult to decipher in terms of the physical processes involved, and there is a need for models relating the mechanics of volcanic sources to observations. Here we use focal mechanism data of the energetic swarm induced by the 2000 dike intrusion at Miyakejima (Izu Archipelago, Japan), to study the relation between the 3-D dike-induced stresses and the characteristics of the seismicity. We perform a clustering analysis on the focal mechanism (FM) solutions and relate them to the dike stress field and to the scaling relationships of the earthquakes. We find that the strike and rake angles of the FMs are strongly correlated and cluster on bands in a strike-rake plot. We suggest that this is consistent with optimally oriented faults according to the expected pattern of Coulomb stress changes. We calculate the frequency-size distribution of the clustered sets finding that focal mechanisms with a large strike-slip component are consistent with the Gutenberg-Richter relation with a b value of about 1. Conversely, events with large normal faulting components deviate from the Gutenberg-Richter distribution with a marked roll-off on its right-hand tail, suggesting a lack of large-magnitude events (M-w>5.5). This may result from the interplay of the limited thickness and lower rock strength of the layer of rock above the dike, where normal faulting is expected, and lower stress levels linked to the faulting style and low confining pressure.
We present a new record of eolian dust flux to the western Subarctic North Pacific (SNP) covering the past 27,000years based on a core from the Detroit Seamount. Comparing the SNP dust record to the North Greenland Ice Core Project (NGRIP) ice core record shows significant differences in the amplitude of dust changes to the two regions during the last deglaciation, while the timing of abrupt changes is synchronous. If dust deposition in the SNP faithfully records its mobilization in East Asian source regions, then the difference in the relative amplitude must reflect climate-related changes in atmospheric dust transport to Greenland. Based on the synchronicity in the timing of dust changes in the SNP and Greenland, we tie abrupt deglacial transitions in the Th-230-normalized He-4 flux record to corresponding transitions in the well-dated NGRIP dust flux record to provide a new chronostratigraphic technique for marine sediments from the SNP. Results from this technique are complemented by radiocarbon dating, which allows us to independently constrain radiocarbon paleoreservoir ages. We find paleoreservoir ages of 745140years at 11,653year B.P., 680228years at 14,630year B.P., and 790498years at 23,290year B.P. Our reconstructed paleoreservoir ages are consistent with modern surface water reservoir ages in the western SNP. Good temporal synchronicity between eolian dust records from the Subantarctic Atlantic and equatorial Pacific and the ice core record from Antarctica supports the reliability of the proposed dust tuning method to be used more widely in other global ocean regions.
For near surface geophysical surveys, small-fixed offset loop-loop electromagnetic induction (EMI) sensors are usually placed parallel to the ground surface (i.e., both loops are at the same height above ground). In this study, we evaluate the potential of making measurements with a system that is not parallel to the ground; i.e., by positioning the system at different inclinations with respect to ground surface. First, we present the Maxwell theory for inclined magnetic dipoles over a homogeneous half space. By analyzing the sensitivities of such configurations, we,show that varying the angle of the system would result in improved imaging capabilities. For example, we show that acquiring data with a vertical system allows detection of a conductive body with a better lateral resolution compared to data acquired using standard horizontal configurations. The synthetic responses are presented for a heterogeneous medium and compared to field data acquired in the historical Park Sanssouci in Potsdam, Germany. After presenting a detailed sensitivity analysis and synthetic examples of such ground conductivity measurements, we suggest a new strategy of acquisition that allows to better estimate the true distribution of electrical conductivity using instruments with a fixed, small offset between the loops. This strategy is evaluated using field data collected at a well-constrained test-site in Horstwalde (Germany). Here, the target buried utility pipes are best imaged using vertical system configurations demonstrating the potential of our approach for typical applications. (C) 2015 Elsevier B.V. Pill rights reserved.
We present the results of our investigations on the radiocarbon dated core sediments from the Lake Tso Moriri, NW Himalaya aimed at reconstructing palaeohydrological changes in this climatically sensitive region. Based on the detailed geochemical, mineralogical and sedimentological analysis, we recognise several short-term fluctuations superimposed upon seven major palaeohydrological stages identified in this lake since similar to 26 cal ka. Stage I (>20.2 cal ka): shallow lake characterised by input of coarse-grained detrital sediments; Stage II (20.2-16.4 cal ka): lake deepening and intensification of this trend ca. 18 cal ka; Stage III (16.4-11.2 cal ka): rising lake levels with a short term wet phase (13.1-11.7 cal ka); Stage IV (11.2-8.5 cal ka): early Holocene hydrological maxima and highest lake levels inferred to have resulted from early Holocene Indian monsoon intensification, as records from central Asia indicate weaker westerlies during this interval; Stage V (8.5-5.5 cal ka): mid-Holocene climate deterioration; Stage VI (5.5-2.7 cal ka): progressive lowering of lake level; Stage VII (2.7-0 cal ka): onset of modern conditions. The reconstructed hydrological variability in Lake Tso Moriri is governed by temperature changes (meltwater inflow) and monsoon precipitation (increased runoff). A regional comparison shows considerable differences with other palaeorecords from peninsular India during late Holocene. (C) 2014 Elsevier Ltd and INQUA. All rights reserved.
As part of ongoing research on Holocene lacustrine sediments of Lonar Crater Lake (central India), pollen assemblages in lake surface sediment and soil samples were studied to unravel pollenevegetation relationships, including pollen transport processes in tropical dry deciduous forest vegetation. Furthermore, palynological results were compared with geochemical proxies and spatial features of the lake sediments and the vegetation. The obtained data reveal strong differences in pollen assemblages and pollen concentrations between and within the studied trapping media. Local arboreal vegetation is adequately represented in the soil samples, but is less represented in the lake surface sediment samples. The composition of the lacustrine pollen assemblages is mainly influenced by patterns of transport through surface and channel runoff. Besides the relevance of our new data for reliable interpretation of fossil pollen spectra extracted from Lonar sediment cores, the results of this study are of general importance for the understanding of Quaternary pollen assemblages from tropical lacustrine archives, as well as for the implementation and selection of suitable approaches for quantitative pollen based environmental reconstructions in south Asia and beyond. (C) 2015 Elsevier Ltd and INQUA. All rights reserved.
Multi-scale analysis of electrical conductivity of peatlands for the assessment of peat properties
(2015)
Peatlands store large amounts of carbon. This storage function has been reduced through intensive drainage, which leads to the decomposition of peat, resulting in a loss of carbon. Measurements of the real (sigma) and imaginary part (sigma) of electrical conductivity can deliver information on peat properties, such as the pore fluid conductivity (sigma(w)), cation exchange capacity (CEC), bulk density ((b)), water content (WC) and soil organic matter (SOM) content. These properties change with the peat's degree of decomposition (DD). To explore the relationships between the peat properties, sigma, sigma and DD, we focused on three different types of survey and scales. First, point measurements were made with a conductivity probe at various locations over a large area of northeast Germany to determine the degree of correlation between sigma and DD. Second, nine of these locations were selected for sampling to determine which of the properties sigma(w), CEC, (b), WC and SOM predominantly influence sigma and sigma. This multisite dataset includes the entire range of DD and was analysed in the laboratory. Third, one site was selected for a survey of sigma including sampling, to identify which properties mainly control sigma in a single-site approach. Statistical analysis revealed that for the multisite laboratory dataset, sigma(w) has the strongest effect on sigma, followed by CEC, whereas sigma is mainly determined by CEC. In a single-site approach, WC followed by CEC had a dominant effect on sigma. No clear correlation could be observed between (i) DD and peat properties and (ii) DD and sigma or sigma. This is because of the complex changes in properties with increasing DD.
Individual great earthquakes are posited to release the elastic strain energy that has accumulated over centuries by the gradual movement of tectonic plates(1,2). However, knowledge of plate deformation during a complete seismic cycle-two successive great earthquakes and the intervening interseismic period-remains incomplete(3). A complete seismic cycle began in south-central Chile in 1835 with an earthquake of about magnitude 8.5 (refs 4,5) and ended in 2010 with a magnitude 8.8 earthquake(6). During the first earthquake, an uplift of Isla Santa Maria by 2.4 to 3m was documented(4,5). In the second earthquake, the island was uplifted(7) by 1.8 m. Here we use nautical surveys made in 1804, after the earthquake in 1835 and in 1886, together with modern echo sounder surveys and GPS measurements made immediately before and after the 2010 earthquake, to quantify vertical deformation through the complete seismic cycle. We find that in the period between the two earthquakes, Isla Santa Maria subsided by about 1.4 m. We simulate the patterns of vertical deformation with a finite-element model and find that they agree broadly with predictions from elastic rebound theory(2). However, comparison with geomorphic and geologic records of millennial coastline emergence(8,9) reveal that 10-20% of the vertical uplift could be permanent.
Flow phenomena in the unsaturated zone are highly variable in time and space. Thus, it is challenging to measure and monitor such processes under field conditions. Here, we present a new setup and interpretation approach for combining a dye tracer experiment with a 4D ground-penetrating radar (GPR) survey. Therefore, we designed a rainfall experiment during which we measured three surface-based 3D GPR surveys using a pair of 500 MHz antennas. Such a survey setup requires accurate acquisition and processing techniquesto extract time-lapse information supporting the interpretation of selected cross-sections photographed after excavating the site. Our results reveal patterns of traveltime changes in the measured GPR data, which are associated with soil moisture changes. As distinct horizons are present at our site, such changes can be quantified and transferred into changes in total soil moisture content. Our soil moisture estimates are similar to the amount of infiltrated water, which confirms our experimental approach and makes us confident for further developing this strategy, especially, with respect to improving the temporal and spatial resolution. (C) 2015 Elsevier B.V. All rights reserved.
In the present study, we report the results of comprehensive amino acid (AA) analyses of four Indian lakes from different climate regimes. We focus on the investigation of sediment cores retrieved from the lakes but data of modern sediment as well as vascular plant, soil, and suspended particulate matter samples from individual lakes are also presented. Commonly used degradation and organic matter source indices are tested for their applicability to the lake sediments, and we discuss potential reasons for possible limitations. A principal component analysis including the monomeric AA composition of organic matter of all analysed samples indicates that differences in organic matter sources and the environmental properties of the individual lakes are responsible for the major variability in monomeric AA distribution of the different samples. However, the PCA also gives a factor that most probably separates the samples according to their state of organic matter degradation. Using the factor loadings of the individual AA monomers, we calculate a lake sediment degradation index (LI) that might be applicable to other palaeo-lake investigations. (C) 2015 Elsevier Ltd. All rights reserved.
Topographic migration of 2D and 3D ground-penetrating radar data considering variable velocities
(2015)
We present a 2D/3D topographic migration scheme for ground-penetrating radar (GPR) data which is able to account for variable velocities by using the root mean square (rms) velocity approximation. We test our migration scheme using a synthetic 2D example and compare our migrated image to the results obtained using common GPR migration approaches. Furthermore, we apply it to 2D and 3D field data. These examples are recorded across common subsurface settings including surface topography and variations in the GPR subsurface velocity field caused by a shallow ground water table. In such field settings, our migration strategy provides well focused images of commonoffset GPR data without the need for a detailed interval velocity model. The synthetic and field examples demonstrate that our topographic migration scheme allows for accurate GPR imaging in the presence of variations in surface topography and subsurface velocity.
Ground-penetrating radar (GPR) is an established geophysical method to explore near-surface sedimentary environments. Interpreting GPR images is largely based on manual procedures following concepts known as GPR facies analysis. We have developed a novel strategy to distinguish GPR facies in a largely automated and more objective manner. First, we calculate 13 textural attributes to quantify GPR reflection characteristics. Then, this database is reduced using principal component analysis. Finally, we image the dominating principal components using composite imaging and classify them using standard clustering methods. The potential of this work-flow is evaluated using a 2D GPR field example collected across stratified glaciofluvial deposits. Our results demonstrate that the derived facies images are well correlated with the composition and the porosity of the sediments as known from independent borehole logs. Our analysis strategy eases and improves the interpretability of GPR data and will help in a variety of geologic and hydrological problems.
This study focuses on evaluating the potential of ALOS/PALSAR time-series data to analyze the activation of deep-seated landslides in the foothill zone of the high mountain Alai range in the southern Tien Shan (Kyrgyzstan). Most previous field-based landslide investigations have revealed that many landslides have indicators for ongoing slow movements in the form of migrating and newly developing cracks. L-band ALOS/PALSAR data for the period between 2007 and 2010 are available for the 484 km(2) area in this study. We analyzed these data using the Small Baseline Subset (SBAS) time-series technique to assess the surface deformation related to the activation of landslides. We observed up to +/- 17 mm/year of LOS velocity deformation rates, which were projected along the local steepest slope and resulted in velocity rates of up to -63 mm/year. The obtained rates indicate very slow movement of the deep-seated landslides during the observation time. We also compared these movements with precipitation and earthquake records. The results suggest that the deformation peaks correlate with rainfall in the 3 preceding months and with an earthquake event. Overall, the results of this study indicated the great potential of L-band InSAR time series analysis for efficient spatiotemporal identification and monitoring of slope activations in this region of high landslide activity in Southern Kyrgyzstan.
Vegetated dunes are recognized as important natural barriers that shelter inland ecosystems and coastlines suffering daily erosive impacts of the sea and extreme events, such as tsunamis. However, societal responses to erosion and shoreline retreat often result in man-made coastal defence structures that cover part of the intertidal and upper shore zones causing coastal squeeze and habitat loss, especially for upper shore biota, such as dune plants. Coseismic uplift of up to 2.0 m on the Peninsula de Arauco (South central Chile, ca. 37.5 degrees S) caused by the 2010 Maule earthquake drastically modified the coastal landscape, including major increases in the width of uplifted beaches and the immediate conversion of mid to low sandy intertidal habitat to supralittoral sandy habitat above the reach of average tides and waves. To investigate the early stage responses in species richness, cover and across-shore distribution of the hitherto absent dune plants, we surveyed two formerly intertidal armoured sites and a nearby intertidal unarmoured site on a sandy beach located on the uplifted coast of Llico (Peninsula de Arauco) over two years. Almost 2 years after the 2010 earthquake, dune plants began to recruit, then rapidly grew and produced dune hummocks in the new upper beach habitats created by uplift at the three sites. Initial vegetation responses were very similar among sites. However, over the course of the study, the emerging vegetated dunes of the armoured sites suffered a slowdown in the development of the spatial distribution process, and remained impoverished in species richness and cover compared to the unarmoured site. Our results suggest that when released from the effects of coastal squeeze, vegetated dunes can recover without restoration actions. However, subsequent human activities and management of newly created beach and dune habitats can significantly alter the trajectory of vegetated dune development. Management that integrates the effects of natural and human induced disturbances, and promotes the development of dune vegetation as natural barriers can provide societal and conservation benefits in coastal ecosystems.
Climate change will alter the forces of predation and competition in temperate ectotherm food webs. This may increase local extinction rates, change the fate of invasions and impede species reintroductions into communities. Invasion success could be modulated by traits (e.g., defenses) and adaptations to climate. We studied how different temperatures affect the time until extinction of species, using bitrophic and tritrophic planktonic food webs to evaluate the relative importance of predatory overexploitation and competitive exclusion, at 15 and 25 A degrees C. In addition, we tested how inclusion of a subtropical as opposed to a temperate strain in this model food web affects times until extinction. Further, we studied the invasion success of the temperate rotifer Brachionus calyciflorus into the planktonic food web at 15 and 25 A degrees C on five consecutive introduction dates, during which the relative forces of predation and competition differed. A higher temperature dramatically shortened times until extinction of all herbivore species due to carnivorous overexploitation in tritrophic systems. Surprisingly, warming did not increase rates of competitive exclusion among the tested herbivore species in bitrophic communities. Including a subtropical herbivore strain reduced top-down control by the carnivore at high temperature. Invasion attempts of temperate B. calyciflorus into the food web always succeeded at 15 A degrees C, but consistently failed at 25 A degrees C due to voracious overexploitation by the carnivore. Pre-induction of defenses (spines) in B. calyciflorus before the invasion attempt did not change its invasion success at the high temperature. We conclude that high temperatures may promote local extinctions in temperate ectotherms and reduce their chances of successful recovery.
This paper reports on extremely thick and massive duricrusts in soils of two basins in the Alentejo (southern Portugal). Since different types of duricrusts (calcretes, silcretes and palycretes) have been reported from other regions in the Mediterranean, the purpose of this study was to identify the cementing agents in the duricrusts and to compare their composition in the two basins. Moreover, the study aimed at identifying the processes involved in duricrust formation, and especially the role of topography and lateral water and element transport in the landscape, and drawing conclusions about environmental conditions and time of duricrust formation.
After studying an extensive number of road cuts in the field and mapping soil patterns in parts of the two basins by manual augering, ten pedons were selected for detailed description and sampling. Thin sections were analysed under a petrographic microscope, focusing on the micromorphology and optical properties of the cementing materials. Selected samples were studied by scanning electron microscopy and energy-dispersive X-ray spectroscopy to reconfirm the optical identification. The laboratory analyses included pH, carbonate contents, and X-ray diffraction analysis.
The duricrusts in the eastern Sado basin are indurated by silica. Combination of XRD and thin section analysis allowed to identify opal-CT as a major component, while opal-A is present to a lesser extent, and chalcedony is very rare. The cementing materials of the duricrusts in the Oriola basin are palygorskite and calcite, which may occur alone or in combination within a soil profile.
The thick duricrusts formed in the basins through precipitation of calcite, palygorskite and silica from lateral water flows, which ran from the Serra de Portel into the basins, during short moist seasons in a generally warm, semi-arid climate with strong evapotranspiration. Lithology of the upper catchment areas (element sources) and topography control the spatial distribution of the different duricrusts. Their formation took place mainly during the Pliocene. Palygorskite transformation to smectite in the upper parts of the palycretes indicates that palygorskite is unstable in the present (more humid, typical Mediterranean) climate. This study demonstrates the potential role of lateral water and element transport in landscapes that need to be considered in pedological studies and concepts, and the use of mineral indicators of past climates such as palygorskite and the ageing stage of silica precipitations as tools for reconstructing environmental conditions and possible time of duricrust formation.
We herein reappraise the pressure-temperature (PT) evolution of the high-pressure and low-temperature (HP-LT) Tavsanli zone (western Turkey) in order to (i) better characterize rock units exhumed along a cooling subduction interface, from birth to steady state and (ii) constrain exhumation and detachment dynamics, as well as mechanical coupling between plates. Based on PT estimates and field observations three oceanic complexes are recognized between the HP-LT continental margin and the obducted ophiolite, with PT estimates ranging from incipient metamorphism to blueschist-fades conditions. PT conditions for the continental unit are reappraised to 24 kbar and similar to 500 degrees C on the basis of pseudosection modelling and Raman spectroscopy on carbonaceous material. A tentative reconstruction of the subduction zone evolution is proposed using available radiometric and palaeogeographic data and recent thermomechanical modelling. Both PT conditions and field observations point out to the slicing of km-sized units at different preferred depths along the subduction interface, thus providing constraints on the dynamics of accretion and underplating. In particular, the comparison of PT estimates for the Tavsanli zone and for other broadly similar fossil subduction settings (i.e., Oman, Corsica, New Caledonia, Franciscan, Schistes Lustres) suggests that units are detached preferentially from the slab at specific depths of 30-40 km (i.e., downdip of the seismogenic zone) and similar to 80 km. We propose that these depths are controlled by major changes in mechanical coupling along the plate interface, whereas exhumation through time would rather be controlled by large-scale geodynamic boundary conditions. (C) 2015 Elsevier B.V. All rights reserved.
Background: GEOMAGIA50.v3 for sediments is a comprehensive online database providing access to published paleomagnetic, rock magnetic, and chronological data obtained from lake and marine sediments deposited over the past 50 ka. Its objective is to catalogue data that will improve our understanding of changes in the geomagnetic field, physical environments, and climate.
Findings: GEOMAGIA50.v3 for sediments builds upon the structure of the pre-existing GEOMAGIA50 database for magnetic data from archeological and volcanic materials. A strong emphasis has been placed on the storage of geochronological data, and it is the first magnetic archive that includes comprehensive radiocarbon age data from sediments. The database will be updated as new sediment data become available.
Conclusions: The web-based interface for the sediment database is located at http://geomagia.gfz-potsdam.de/geomagiav3/SDquery.php. This paper is a companion to Brown et al. (Earth Planets Space doi:10.1186/s40623-015-0232-0,2015) and describes the data types, structure, and functionality of the sediment database.
Hydrothermal carbonization (HTC) produces carbon-rich nano-micro size particles. In this study, magnetic hydrochar (MHC) was prepared from model compound cellulose by simply adding ferrites during HTC. The effects of ferrites on HTC were evaluated by characterizing solid MHC and corresponding process liquid. Additionally, magnetic stability of MHC was tested by magnetic susceptibility method. Finally, MHC was used as support media for anaerobic films in anaerobic digestion (AD). Ash-free mass yield was around 50% less in MHC than hydrochar produced without ferrites at any certain HTC reaction condition, where organic part of MHC is mainly carbon. In fact, amorphous hydrochar was growing on the surface of inorganic ferrites. MHC maintained magnetic susceptibility regardless of reaction time at reaction temperature 250 degrees C. Pronounced inhibitory effects of magnetic hydrochar occurred during start-up of AD but diminished with prolong AD times. Visible biofilms were observed on the MHC by laser scanning microscope after AD. (C) 2015 Elsevier Ltd. All rights reserved.
Computer-based simulation models are frequently used in hydrological research and engineering but also in other fields of environmental sciences. New case studies often require existing model concepts to be adapted. Extensions may be necessary due to the peculiarities of the studied natural system or subtleties of anthropogenic control. In other cases, simplifications must be made in response to scarce data, incomplete knowledge, or restrictions set by the spatio-temporal scale of application. This paper introduces an open-source modeling framework called ECHSE designed to cope with the above-mentioned challenges. It provides a lightweight infrastructure for the rapid development of new, reusable simulation tools and, more importantly, the safe modification of existing formulations. ECHSE-based models treat the simulated system as a collection of interacting objects. Although feedbacks are generally supported, the majority of the objects' interactions is expected to be of the feed-forward type. Therefore, the ECHSE software is particularly useful in the context of hydrological catchment modeling. Conversely, it is unsuitable, e.g., for fully hydrodynamic simulations and groundwater flow modeling. The focus of the paper is put on a comprehensible outline of the ECHSE's fundamental concepts and limitations. For the purpose of illustration, a specific, ECHSE-based solution for hydrological catchment modeling is presented which has undergone testing in a number of river basins. (C) 2015 Elsevier Ltd. All rights reserved.
The topographic signature of a mountain belt depends on the interplay of tectonic, climatic and erosional processes, whose relative importance changes over times, while quantifying these processes and their rates at specific times remains a challenge. The eastern Andes of central Bolivia offer a natural laboratory in which such interplay has been debated. Here, we investigate the Rio Grande catchment which crosses orthogonally the eastern Andes orogen from the Eastern Cordillera into the Subandean Zone, exhibiting a catchment relief of up to 5000 m. Despite an enhanced tectonic activity in the Subandes, local relief, mean and modal slopes and channel steepness indices are largely similar compared to the Eastern Cordillera and the intervening Interandean Zone. Nevertheless, a dataset of 57 new cosmogenic 10Be and 26AI catchment wide denudation rates from the Rio Grande catchment reveals up to one order of magnitude higher denudation rates in the Subandean Zone (mean 0.8 mm/yr) compared to the upstream physiographic regions. We infer that tectonic activity in the thrusting dominated Subandean belt causes higher denudation rates based on cumulative rock uplift investigations and due to the absence of a pronounced climate gradient. Furthermore, the lower rock strength of the Subandean sedimentary units correlates with mean slopes similar to the ones of the Eastern Cordillera and Interandean Zone, highlighting the fact, that lithology and rock strength can control high denudation rates at low slopes.
Low denudation rates measured at the outlet of the Rio Grande catchment (Abapo) are interpreted to be a result of a biased cosmogenic nuclide mixing that is dominated by headwater signals from the Eastern Cordillera and the Interandean zone and limited catchment sediment connectivity in the lower river reaches. Therefore, comparisons of short- (i.e., sediment yield) and millennial denudation rates require caution when postulating tectonic and/or climatic forcing without detailed studies. (C) 2015 The Authors. Published by Elsevier B.V.
A better understanding of past variations of the Indian Summer Monsoon (ISM), that plays a vital role for the still largely agro-based economy in India, can lead to a better assessment of its potential impact under global climate change scenarios. However, our knowledge of spatiotemporal patterns of ISM strength is limited due to the lack of high-resolution, continental paleohydrological records. Here, we reconstruct centennial-scale hydrological variability during the Holocene associated to changes in the intensity of the ISM based on a record of lipid biomarker abundances and compound-specific stable isotopic composition of a 10 m long sediment core from saline alkaline Lonar Lake, situated in the core 'monsoon zone' of central India.
We identified three main periods of distinct hydrology during the Holocene in central India. The period between 10.1 and 6 cal ka BP was likely the wettest during the Holocene. Lower average chain length (ACL) index values (29.4-28.6) and negative delta C-13(wax) values (-34.8 parts per thousand to -27.8 parts per thousand) of leaf wax n-alkanes indicate the dominance of woody C-3 vegetation in the catchment, and negative delta D-wax values (concentration weighted average) (-171 parts per thousand to -147 parts per thousand) suggest a wet period due to an intensified monsoon. After 6 cal ka BP, a gradual shift to less negative delta C-13(wax) values (particularly for the grass derived n-C-31) and appearance of the triterpene lipid tetrahymanol, generally considered as a marker for salinity and water column stratification, mark the onset of drier conditions. At 5.1 cal ka BP an increasing flux of leaf wax n-alkanes along with the highest flux of tetrahymanol indicate a major lowering of the lake level. Between 4.8 and 4 cal ka BP, we find evidence for a transition to arid conditions, indicated by high and strongly variable tetrahymanol flux. In addition, a pronounced shift to less negative delta C-13(wax) values, in particular for n-C-31 (-25.2 parts per thousand to -22.8 parts per thousand), during this period indicates a change of dominant vegetation to C-4 grasses. In agreement with other proxy data, such as deposition of evaporite minerals, we interpret this period to reflect the driest conditions in the region during the last 10.1 ka. This transition led to protracted late Holocene arid conditions after 4 ka with the presence of a permanent saline lake, supported by the sustained presence of tetrahymanol and more positive average delta D-wax values (-122 parts per thousand to -141 parts per thousand). A late Holocene peak of cyanobacterial biomarker input at 1.3 cal ka BP might represent an event of lake eutrophication, possibly due to human impact and the onset of cattle/livestock farming in the catchment.
A unique feature of our record is the presence of a distinct transitional period between 4.8 and 4 cal ka BP, which was characterized by some of the most negative delta D-wax values during the Holocene (up to -180 parts per thousand), when all other proxy data indicate the driest conditions during the Holocene. These negative delta D-wax values can as such most reasonably be explained by a shift in moisture source area and/or pathways or rainfall seasonality during this transitional period. We hypothesize that orbital induced weakening of the summer solar insolation and associated reorganization of the general atmospheric circulation, as a possible southward displacement of the tropical rainbelt, led to an unstable hydroclimate in central India between 4.8 and 4 ka.
A Bayesian ground-motion model is presented that directly estimates the coefficients of the model and the correlation between different ground-motion parameters of interest. The model is developed as a multi-level model with levels for earthquake, station and record terms. This separation allows to estimate residuals for each level and thus the estimation of the associated aleatory variability. In particular, the usually estimated within-event variability is split into a between-station and between-record variability. In addition, the covariance structure between different ground-motion parameters of interest is estimated for each level, i.e. directly the between-event, between-station and between-record correlation coefficients are available. All parameters of the model are estimated via Bayesian inference, which allows to assess their epistemic uncertainty in a principled way. The model is developed using a recently compiled European strong-motion database. The target variables are peak ground velocity, peak ground acceleration and spectral acceleration at eight oscillator periods. The model performs well with respect to its residuals, and is similar to other ground-motion models using the same underlying database. The correlation coefficients are similar to those estimated for other parts of the world, with nearby periods having a high correlation. The between-station, between-event and between-record correlations follow generally a similar trend.
The specific chemical composition of monazite in shear zones is controlled by the syndeformation dissolution-precipitation reactions of the rock-forming minerals. This relation can be used for dating deformation, even when microfabric characteristics like shape preferred orientation or intracrystalline deformation of monazite itself are missing. Monazite contemporaneously formed in and around the shear zones may have different compositions. These depend on the local chemical context rather than reflecting successive crystallization episodes of monazite.
This is demonstrated in polymetamorphic, mylonitic high-pressure (HP) garnet-kyanite granulites of the Alpine Sidironero Complex (Rhodope UHP terrain, Northern Greece). The studied mylonitic rocks escaped from regional migmatization at 40-36 Ma and from subsequent shearing through cooling until 36 Ma. In-situ laser-ablation split-stream inductively-coupled plasma mass spectrometry (LASS) analyses have been carried out on monazite from micro-scale shear zones, from pre-mylonitic microlithons as well as of monazite inclusions in relictic minerals complimented by U-Pb data on rutile and Rb-Sr data of biotite.
Two major metamorphic episodes, Mesozoic and Cenozoic, are constrained. Chemical compositions, isotopic characteristics and apparent ages systematically vary among monazite of four different microfabric domains (I-IV). Within three pre-mylonitic domains (inclusions in (I) pre-mylonitic kyanite and (II) garnet porphyroclasts, and (III) in pre-mylonitic microlithons) monazite yields ages of ca. 130-150 Ma for HP-granulite metamorphism, in line with previous geochronological results in the area. Patchy alteration of the pre-mylonitic monazite by intra-grain dissolution-precipitation processes variably increased negative Eu anomaly and reduced the HREE contents. The apparent age of this altered monazite is reduced.
Monazite in the syn-mylonitic shear bands (IV) differs in chemical composition from unaltered and altered monazite of the three pre-mylonitic domains by having a significantly more pronounced negative Eu anomaly, a flatter HREE pattern, and high Th content. These compositional characteristics are linked with syn-mylonitic formation of plagioclase and resorption of garnet in the shear bands under amphibolite fades conditions. The absence of pre-mylonitic monazite in the shear zones, in contrast to the other domains, suggests complete dissolution of old and formation of new monazite. This probably results from an increased alkalinity and reactivity of the fluid that again is controlled by syn-mylonitic interaction with feldspar and apatite in the shear zones. There, the deformation was accommodated by dissolution precipitation creep at ca. 690 +/- 50 degrees C and 6-7.5 kbar. Growth of monazite at 55 +/- 1 Ma dates this deformation, which precedes the regional migmatization of the Sidironero Complex, whereas rutile and biotite ages reflect these later stages. This new pressure-temperature-time constraint for a relictic deformation structure provides insight into the still missing parts of the overall metamorphic, deformation and exhumation processes of the UHP units in the Rhodope. (C) 2015 Elsevier B.V. All rights reserved.
Sedimentological, palaeontological and mineralogical analyses of sediments from the endorheic Al Jafr Basin were conducted to better understand the depositional and hydrological conditions on the southern Jordan Plateau in the late Quaternary. Surficially exposed carbonate-rich sediments in the western part of the basin contain ostracod (micro-crustacean) shells of Ilyocypris cf. bradyi, Candona neglecta, Heterocypris salina, Fabaeformiscandona fabaeformis, Pseudocandona sp. and Herpetocypris brevicaudata. The shells of these and other more rare species, and charophyte and mollusc remains indicate that the sediments were formed in a wetland setting of shallow freshwater to slightly oligohaline ponds, streams and swamps. The present more northern distribution of some of the recorded taxa implies that climate conditions were probably cooler during the wetland formation. Radiocarbon age data for biogenic carbonate from two locations suggest that the wetland setting existed during the second half of Marine Isotope Stage (MIS) 3 or possibly earlier. A significantly higher water table must have existed in the basin during wetland formation; and wetter climate conditions are inferred for the catchment or at least for its highest and most humid westernmost part. Deflation and local sediment accumulation by wind and occasional sheet-wash events apparently prevailed in the region since MIS 2. Our newly presented data and inferences do not support the reconstruction of a previously reported large and relatively deep Pleistocene lake in the Al Jafr Basin. However, more extensive studies are certainly required for a detailed assessment of the Quaternary hydrological conditions in southern Jordan. (C) 2014 Elsevier Ltd and INQUA. All rights reserved.
The Brazilian Cerrado is recognized as one of the most threatened biomes in the world, as the region has experienced a striking change from natural Cerrado vegetation to intense cash crop production. This paper reviews the history of land conversion in the Cerrado and the development of soil properties and water resources under past and ongoing land use. We compared soil and water quality parameters from different land uses considering 80 soil and 18 water studies conducted in different regions across the Cerrado to provide quantitative evidence of soil and water alterations from land use change.
Following the conversion of native Cerrado, significant effects on soil pH, bulk density and available P and K for croplands and less-pronounced effects on pastures were evident. Soil total N did not differ between land uses because most of the sites classified as croplands were nitrogen-fixing soybeans, which are not artificially fertilized with N. In contrast, water quality studies showed nitrogen enrichment in agricultural catchments, indicating fertilizer impacts and potential susceptibility to eutrophication. Regardless of the land use, P is widely absent because of the high-fixing capacities of deeply weathered soils and the filtering capacity of riparian vegetation. Pesticides, however, were consistently detected throughout the entire aquatic system. In several case studies, extremely high-peak concentrations exceeded Brazilian and European Union (EU) water quality limits, which were potentially accompanied by serious health implications. Land use intensification is likely to continue, particularly in regions where less annual rainfall and severe droughts are projected in the northeastern and western Cerrado. Thus, the leaching risk and displacement of agrochemicals are expected to increase, particularly because the current legislation has caused a reduction in riparian vegetation. We conclude that land use intensification is likely to seriously limit the Cerrado's future regarding both agricultural productivity and ecosystem stability. Because only limited data are available, we recommend further field studies to understand the interaction between terrestrial and aquatic systems. This study may serve as a valuable database for integrated modelling to investigate the impact of land use and climate change on soil and water resources and to test and develop mitigation measures for the Cerrado. Copyright (C) 2014 John Wiley & Sons, Ltd.
Reduced nitrate supply to the subarctic North Pacific (SNP) surface during the last ice age has been inferred from coupled changes in diatom-bound delta N-15 (DB-delta N-15), bulk sedimentary delta N-15, and biogenic fluxes. However, the reliability of bulk sedimentary and DB-delta N-15 has been questioned, and a previously reported delta N-15 minimum during Heinrich Stadial 1 (HS1) has proven difficult to explain. In a core from the western SNP, we report the foraminifera-bound delta N-15 (FB-delta N-15) in Neogloboquadrina pachyderma and Globigerina bulloides, comparing them with DB-delta N-15 in the same core over the past 25 kyr. The delta N-15 of all recorders is higher during the Last Glacial Maximum (LGM) than in the Holocene, indicating more complete nitrate consumption. N. pachyderma FB-delta N-15 is similar to DB-delta N-15 in the Holocene but 2.2% higher during the LGM. This difference suggests a greater sensitivity of FB-delta(15)NZ to changes in summertime nitrate drawdown and delta N-15 rise, consistent with a lag of the foraminifera relative to diatoms in reaching their summertime production peak in this highly seasonal environment. Unlike DB-delta N-15, FB-delta N-15 does not decrease from the LGM into HS1, which supports a previous suggestion that the HS1 DB-delta N-15 minimum is due to contamination by sponge spicules. FB-delta N-15 drops in the latter half of the Bolling/Allerod warm period and rises briefly in the Younger Dryas cold period, followed by a decline into the mid-Holocene. The FB-delta N-15 records suggest that the coupling among cold climate, reduced nitrate supply, and more complete nitrate consumption that characterized the LGM also applied to the deglacial cold events.
Hydrology is rich in methods that use information theory to evaluate monitoring networks. Yet in most existing studies, only the available data set as a whole is used, which neglects the intraannual variability of the hydrological system. In this paper, we demonstrate how this variability can be considered by extending monitoring evaluation to subsets of the available data. Therefore, we separately evaluated time windows of fixed length, which were shifted through the data set, and successively extended time windows. We used basic information theory measures and a greedy ranking algorithm based on the criterion of maximum information/minimum redundancy. The network investigated monitored surface and groundwater levels at quarter-hourly intervals and was located at an artificially drained lowland site in the Spreewald region in north-east Germany. The results revealed that some of the monitoring stations were of value permanently while others were needed only temporally. The prevailing meteorological conditions, particularly the amount of precipitation, affected the degree of similarity between the water levels measured. The hydrological system tended to act more individually during periods of no or little rainfall. The optimal monitoring setup, its stability, and the monitoring effort necessary were influenced by the meteorological forcing. Altogether, the methodology presented can help achieve a monitoring network design that has a more even performance or covers the conditions of interest (e.g., floods or droughts) best.
In the Sri Lankan Highlands erosion and chemical weathering rates are among the lowest for global mountain denudation. In this tropical humid setting, highly weathered deep saprolite profiles have developed from high-grade metamorphic charnockite during spheroidal weathering of the bedrock. The spheroidal weathering produces rounded corestones and spalled rindlets at the rock-saprolite interface. We used detailed textural, mineralogical and chemical analyses to reconstruct the sequence of weathering reactions and their causes. The first mineral attacked by weathering was found to be pyroxene initiated by in situ Fe oxidation. Volumetric calculations suggest that this oxidation leads to the generation of porosity due to the formation of micro-fractures allowing for fluid transport and subsequent dissolution of biotite and plagioclase. The rapid ensuing plagioclase weathering leads to formation of high secondary porosity in the corestone over a distance of only a few cm and eventually to the final disaggregation of bedrock to saprolite. The first secondary phases are oxides or amorphous precipitates from which secondary minerals (mainly gibbsite, kaolinite and goethite) form. As oxidation is the first weathering reaction, the supply of O-2 is a rate-limiting factor for chemical weathering. Hence, the supply of O-2 and its consumption at depth connects processes at the weathering front with those at the Earth's surface in a feedback mechanism. The strength of the feedback depends on the relative weight of advective versus diffusive transport of O-2 through the weathering profile. The feedback will be stronger with dominating diffusive transport. The low weathering rate is explained by the nature of this feedback that is ultimately dependent on the transport of O-2 through the whole regolith, and on lithological factors such as low bedrock porosity and the amount of Fe-bearing primary minerals. Tectonic quiescence in this region and low pre-development erosion rate (attributed to a dense vegetation cover) minimize the rejuvenation of the thick and cohesive regolith column, finally leading to low denudation rates. (C) 2015 Elsevier B.V. All rights reserved.
The ICDP "PaleoVan" drilling campaign at Lake Van, Turkey, provided a long (> 100 m) record of lacustrine subsurface sedimentary microbial cell abundance. After the ICDP campaign at Potrok Aike, Argentina, this is only the second time deep lacustrine cell counts have been documented. Two sites were cored and revealed a strikingly similar cell distribution despite differences in organic matter content and microbial activity. Although shifted towards higher values, cell counts from Lake Potrok Aike, Argentina, reveal very similar distribution patterns with depth. The lacustrine cell count data are significantly different from published marine records; the most probable cause is differences in sedimentary organic matter composition with marine sediments containing a higher fraction of labile organic matter. Previous studies showed that microbial activity and abundance increase centimetres to metres around geologic interfaces. The finely laminated Lake Van sediment allowed studying this phenomenon on the microscale. We sampled at the scale of individual laminae, and in some depth intervals, we found large differences in microbial abundance between the different laminae. This small-scale heterogeneity is normally overlooked due to much larger sampling intervals that integrate over several centimetres. However, not all laminated intervals exhibit such large differences in microbial abundance, and some non-laminated horizons show large variability on the millimetre scale as well. The reasons for such contrasting observations remain elusive, but indicate that heterogeneity of microbial abundance in subsurface sediments has not been taken into account sufficiently. These findings have implications not just for microbiological studies but for geochemistry as well, as the large differences in microbial abundance clearly show that there are distinct microhabitats that deviate considerably from the surrounding layers.
Assessing uncertainty in refraction seismic traveltime inversion using a global inversion strategy
(2015)
To analyse and invert refraction seismic travel time data, different approaches and techniques have been proposed. One common approach is to invert first-break travel times employing local optimization approaches. However, these approaches result in a single velocity model, and it is difficult to assess the quality and to quantify uncertainties and non-uniqueness of the found solution. To address these problems, we propose an inversion strategy relying on a global optimization approach known as particle swarm optimization. With this approach we generate an ensemble of acceptable velocity models, i.e., models explaining our data equally well. We test and evaluate our approach using synthetic seismic travel times and field data collected across a creeping hillslope in the Austrian Alps. Our synthetic study mimics a layered near-surface environment, including a sharp velocity increase with depth and complex refractor topography. Analysing the generated ensemble of acceptable solutions using different statistical measures demonstrates that our inversion strategy is able to reconstruct the input velocity model, including reasonable, quantitative estimates of uncertainty. Our field data set is inverted, employing the same strategy, and we further compare our results with the velocity model obtained by a standard local optimization approach and the information from a nearby borehole. This comparison shows that both inversion strategies result in geologically reasonable models (in agreement with the borehole information). However, analysing the model variability of the ensemble generated using our global approach indicates that the result of the local optimization approach is part of this model ensemble. Our results show the benefit of employing a global inversion strategy to generate near-surface velocity models from refraction seismic data sets, especially in cases where no detailed a priori information regarding subsurface structures and velocity variations is available.
On 2012 August 11, a pair of large, damaging earthquakes struck the Varzaghan-Ahar region in northwest Iran, in a region where there was no major mapped fault or any well-documented historical seismicity. To investigate the active tectonics of the source region we applied a combination of seismological methods (local aftershock network, calibrated multiple event relocation and focal mechanism studies), field observations (structural geology and geomorphological) and inversions for the regional stress field. The epicentral region is north of the North Tabriz Fault. The first main shock is characterized by right-lateral strike-slip motion on an almost E-W fault plane of about 23 km length extending from the surface to a depth of about 14 km. The second main shock occurred on an ENE-striking fault that dips at 60-70A degrees to the NW. Independent inversions of focal mechanisms and geologically determined fault kinematic data for the active stress state yield a transpressional tectonic regime with sigma(1) oriented N132E. For the region northeast of the North Tabriz Fault, the presence of rigid lithosphere of the South Caspian Basin implies the kinematic adjustment by northward transferring of the contracted masses through both distributed deformation and structural deflections. Our results suggest that the kinematic adjustment inside a contracting wedge may occur along interacting crosswise or conjugate faults to accommodate low rates of internal deformation. At a global scale, our results indicate that despite the basic assumption of 'rigid blocks' in geodetic plate modelling, internal deformation of block-like regions could control the kinematics of deformation and the level of seismic hazard within and around such regions of low deformation rate.
Cosmogenic nuclides are typically used to either constrain an exposure age, a burial age, or an erosion rate. Constraining the landscape history and past erosion rates in previously glaciated terrains is, however, notoriously difficult because it involves a large number of unknowns. The potential use of cosmogenic nuclides in landscapes with a complex history of exposure and erosion is therefore often quite limited. Here, we present a novel multi-nuclide approach to study the landscape evolution and past erosion rates in terrains with a complex exposure history, particularly focusing on regions that were repeatedly covered by glaciers or ice sheets during the Quaternary. The approach, based on the Markov Chain Monte Carlo (MCMC) technique, focuses on mapping the range of landscape histories that are consistent with a given set of measured cosmogenic nuclide concentrations. A fundamental assumption of the model approach is that the exposure history at the site/location can be divided into two distinct regimes: i) interglacial periods characterized by zero shielding due to overlying ice and a uniform interglacial erosion rate, and ii) glacial periods characterized by 100% shielding and a uniform glacial erosion rate. We incorporate the exposure history in the model framework by applying a threshold value to the global marine benthic delta O-18 record and include the threshold value as a free model parameter, hereby taking into account global changes in climate. However, any available information on the glacial-interglacial history at the sampling location, in particular the timing of the last deglaciation event, is readily incorporated in the model to constrain the inverse problem. Based on the MCMC technique, the model delineates the most likely exposure history, including the glacial and interglacial erosion rates, which, in turn, makes it possible to reconstruct an exhumation history at the site. We apply the model to two landscape scenarios based on synthetic data and two landscape scenarios based on paired Be-10/Al-26 data from West Greenland, which makes it possible to quantify the denudation rate at these locations. The model framework, which currently incorporates any combination of the following nuclides Be-10, Al-26, C-14, and Ne-21, is highly flexible and can be adapted to many different landscape settings. The model framework may also be used in combination with physics-based landscape evolution models to predict nuclide concentrations at different locations in the landscape. This may help validate the landscape models via comparison to measured nuclide concentrations or to devise new effective sampling strategies. (C) 2015 The Authors. Published by Elsevier B.V.
Carbon storage capacity of semi-arid grassland soils and sequestration potentials in northern China
(2015)
Organic carbon (OC) sequestration in degraded semi-arid environments by improved soil management is assumed to contribute substantially to climate change mitigation. However, information about the soil organic carbon (SOC) sequestration potential in steppe soils and their current saturation status remains unknown. In this study, we estimated the OC storage capacity of semi-arid grassland soils on the basis of remote, natural steppe fragments in northern China. Based on the maximum OC saturation of silt and clay particles <20m, OC sequestration potentials of degraded steppe soils (grazing land, arable land, eroded areas) were estimated. The analysis of natural grassland soils revealed a strong linear regression between the proportion of the fine fraction and its OC content, confirming the importance of silt and clay particles for OC stabilization in steppe soils. This relationship was similar to derived regressions in temperate and tropical soils but on a lower level, probably due to a lower C input and different clay mineralogy. In relation to the estimated OC storage capacity, degraded steppe soils showed a high OC saturation of 78-85% despite massive SOC losses due to unsustainable land use. As a result, the potential of degraded grassland soils to sequester additional OC was generally low. This can be related to a relatively high contribution of labile SOC, which is preferentially lost in the course of soil degradation. Moreover, wind erosion leads to substantial loss of silt and clay particles and consequently results in a direct loss of the ability to stabilize additional OC. Our findings indicate that the SOC loss in semi-arid environments induced by intensive land use is largely irreversible. Observed SOC increases after improved land management mainly result in an accumulation of labile SOC prone to land use/climate changes and therefore cannot be regarded as contribution to long-term OC sequestration.
Semi-automated detection of annual laminae (varves) in lake sediments using a fuzzy logic algorithm
(2015)
Annual laminae (varves) in lake sediments are typically visually identified, measured and counted, although numerous attempts have been made to automate this process. The reason for the failure of most of these automated algorithms for varve counting is the complexity of the seasonal laminations, typically rich in lateral fades variations and internal heterogeneities. In the manual counting of varves, the investigator acquired and interpreted flexible numbers of complex decision criteria to understand whether a particular simple lamination is a varve or not. Fuzzy systems simulate the flexible decision making process in a computer by introducing a smooth transition between true varve and false varve. In our investigation, we use an adaptive neuro fuzzy inference system (ANFIS) to detect varves on the basis of a digital image of the sediment. The results of the application of the ANFIS to laminated sediments from the Meerfelder Maar (Eifel, Germany) and from a landslide-dammed lake in the Quebrada de Cafayate of Argentina are compared with manual varve counts and possible reasons for the differences are discussed. (C) 2015 Elsevier B.V. All rights reserved.
Plan oblique relief shows terrain with a side view on a two-dimensional map, resulting in visualizations where the third dimension of the terrain is more explicit than on traditional two-dimensional maps. Existing plan oblique maps are static: the angle of terrain inclination is not adjustable and the orientation of plan oblique inclination does not change with the orientation of the map. This article introduces two complementary methods that address these issues by using the 3D graphics pipeline to render plan oblique relief for tile-based web maps. The goal is to allow users to adjust the terrain inclination and map rotation angles to better visualize the third dimension of the terrain. The first method pre-renders plan oblique tiles with a server-side application. The tiles are visualized with a standard web mapping framework. The second method renders plan oblique relief on-the-fly in a web browser using WebGL and a customized version of OpenLayers 3, which enables users to select arbitrary terrain inclination and map rotation angles. The second method uses a tiled digital terrain model that is loaded by the web browser. The browser applies the plan oblique transformation, computes a shaded relief, and texturizes the terrain with tiled map layers.
In this paper we report on a series of replicated tracer experiments with deuterium conducted under controlled, steady stormflow conditions at the Gardsjon G1 catchment in south-western Sweden. In five different years, these experiments were carried out in a subcatchment of G1. Deuterium was applied as a narrow pulse so that distributions of water transit times could be directly inferred from the observed tracer breakthrough curves. Significantly different transit times of water were observed under similar experimental conditions. Coefficients of variation for estimated mean transit times were greater than 60%, which can be understood as a measure of the interannual variability for this type of experiments. Implications for water transit times under more natural flow conditions as wells as for future experimentation are discussed. Copyright (c) 2015 John Wiley & Sons, Ltd.
In the last decade record-breaking rainfall events have occurred in many places around the world causing severe impacts to human society and the environment including agricultural losses and floodings. There is now medium confidence that human-induced greenhouse gases have contributed to changes in heavy precipitation events at the global scale. Here, we present the first analysis of record-breaking daily rainfall events using observational data. We show that over the last three decades the number of record-breaking events has significantly increased in the global mean. Globally, this increase has led to 12 % more record-breaking rainfall events over 1981-2010 compared to those expected in stationary time series. The number of record-breaking rainfall events peaked in 2010 with an estimated 26 % chance that a new rainfall record is due to long-term climate change. This increase in record-breaking rainfall is explained by a statistical model which accounts for the warming of air and associated increasing water holding capacity only. Our results suggest that whilst the number of rainfall record-breaking events can be related to natural multi-decadal variability over the period from 1901 to 1980, observed record-breaking rainfall events significantly increased afterwards consistent with rising temperatures.
Upwelling hot mantle plumes are thought to disintegrate continental lithosphere and are considered to be drivers of active continental breakup. The formation of the Walvis Ridge during the opening of the South Atlantic is related to a putative plume-induced breakup. We investigated the crustal structure of the Walvis Ridge (southeast Atlantic Ocean) at its intersection with the continental margin and searched for anomalies related to the possible plume head. The overall structure we identify suggests that no broad plume head existed during opening of the South Atlantic and anomalous mantle melting occurred only locally. We therefore question the importance of a plume head as a driver of continental breakup and further speculate that the hotspot was present before the rifting, leaving a track of kimberlites in the African craton.
Episodes of environmental stability and instability may be equally important for African hominin speciation, dispersal, and cultural innovation. Three examples of a change from stable to unstable environmental conditions are presented on three different time scales: (1) the Mid Holocene (MH) wet dry transition in the Chew Bahir basin (Southern Ethiopian Rift; between 11 ka and 4 ka), (2) the MIS 5-4 transition in the Naivasha basin (Central Kenya Rift; between 160 ka and 50 ka), and (3) the Early Mid Pleistocene Transition (EMPT) in the Olorgesailie basin (Southern Kenya Rift; between 1.25 Ma and 0.4 Ma). A probabilistic age modeling technique is used to determine the timing of these transitions, taking into account possible abrupt changes in the sedimentation rate including episodes of no deposition (hiatuses). Interestingly, the stable-unstable conditions identified in the three records are always associated with an orbitally-induced decrease of insolation: the descending portion of the 800 kyr cycle during the EMPT, declining eccentricity after the 115 ka maximum at the MIS 5-4 transition, and after similar to 10 ka. This observation contributes to an evidence-based discussion of the possible mechanisms causing the switching between environmental stability and instability in Eastern Africa at three different orbital time scales (10,000 to 1,000,000 years) during the Cenozoic. This in turn may lead to great insights into the environmental changes occurring at the same time as hominin speciation, brain expansion, dispersal out of Africa, and cultural innovations and may provide key evidence to build new hypotheses regarding the causes of early human evolution. (C) 2015 Elsevier Ltd. All rights reserved.
In a recent BAMS article, it is argued that community-based Open Source Software (OSS) could foster scientific progress in weather radar research, and make weather radar software more affordable, flexible, transparent, sustainable, and interoperable.Nevertheless, it can be challenging for potential developers and users to realize these benefits: tools are often cumbersome to install; different operating systems may have particular issues, or may not be supported at all; and many tools have steep learning curves.To overcome some of these barriers, we present an open, community-based virtual machine (VM). This VM can be run on any operating system, and guarantees reproducibility of results across platforms. It contains a suite of independent OSS weather radar tools (BALTRAD, Py-ART, wradlib, RSL, and Radx), and a scientific Python stack. Furthermore, it features a suite of recipes that work out of the box and provide guidance on how to use the different OSS tools alone and together. The code to build the VM from source is hosted on GitHub, which allows the VM to grow with its community.We argue that the VM presents another step toward Open (Weather Radar) Science. It can be used as a quick way to get started, for teaching, or for benchmarking and combining different tools. It can foster the idea of reproducible research in scientific publishing. Being scalable and extendable, it might even allow for real-time data processing.We expect the VM to catalyze progress toward interoperability, and to lower the barrier for new users and developers, thus extending the weather radar community and user base.
A detailed architectural analysis has been performed on the porcelaneous species Taberina bingistani Henson, 1948 from diverse localities, including its type locality in Iran. Characterized by a subcylindrical to slightly conical shape, with a cribbed apertural face, the Cenomanian Middle-East species bingistani is removed from the American early-Paleogene genus Taberina Keijzer, 1945 (type species: T. cubana) and ascribed to the new genus Praetaberina. In the early stages of growth, the chambers are planispiral-involute, becoming uncoiled in the later stages. The interior of the chambers shows numerous septula and pillars. The septula are radial and distributed in the marginal area of the chamber lumen, while the pillars occupy the central area and are regularly distributed between the intercameral foramina. Pillars are in alignment from one chamber to the next. A new species, from southeast Italy, Praetaberina apula, is also erected. It differs from P. bingistani in its smaller size and significantly reduced structural elements. Both species characterize upper Cenomanian shallow-water deposits.
Empirical ground-motion prediction equations (GMPEs) require adjustment to make them appropriate for site-specific scenarios. However, the process of making such adjustments remains a challenge. This article presents a holistic framework for the development of a response spectral GMPE that is easily adjustable to different seismological conditions and does not suffer from the practical problems associated with adjustments in the response spectral domain. The approach for developing a response spectral GMPE is unique, because it combines the predictions of empirical models for the two model components that characterize the spectral and temporal behavior of the ground motion. Essentially, as described in its initial form by Bora et al. (2014), the approach consists of an empirical model for the Fourier amplitude spectrum (FAS) and a model for the ground-motion duration. These two components are combined within the random vibration theory framework to obtain predictions of response spectral ordinates. In addition, FAS corresponding to individual acceleration records are extrapolated beyond the useable frequencies using the stochastic FAS model, obtained by inversion as described in Edwards and Fah (2013a). To that end, a (oscillator) frequency-dependent duration model, consistent with the empirical FAS model, is also derived. This makes it possible to generate a response spectral model that is easily adjustable to different sets of seismological parameters, such as the stress parameter Delta sigma, quality factor Q, and kappa kappa(0). The dataset used in Bora et al. (2014), a subset of the RESORCE-2012 database, is considered for the present analysis. Based upon the range of the predictor variables in the selected dataset, the present response spectral GMPE should be considered applicable over the magnitude range of 4 <= M-w <= 7.6 at distances <= 200 km.
The upper Middle to lower Upper Miocene (Serravallian to Tortonian) sedimentary succession in Salento (southern Italy) includes glauconite- and phosphate-rich deposits, which are associated with pelagic micrite. In Baia del Ciolo and Marittima (southern Salento), the succession is composed of shallow-water platform carbonates of Late Oligocene age (Chattian; Porto Badisco Formation), which are overlain by a 20- to 30-cm-thick level of glauconite-rich micrite with abundant reworked particles and fossils of the underlying Porto Badisco Formation. This interval is in turn covered by an up to 15 cm thick phosphatic crust ("Livello ad Aturia"), which itself is overlain either by a hemipelagic chalk-like carbonate of Middle to Late Miocene age ("Pietra Leccese"; Marittima) or directly by a micrite of Late Miocene age (Messinian; Novaglie Formation; Baia del Ciolo), which shallows upwards into a shallow-water platform carbonate. A large hiatus is present in this succession, which likely includes the Lower and lower Middle Miocene. In the region of Lecce, two discrete levels enriched in glauconite and phosphate-each associated with a major discontinuity-occur within the Pietra Leccese. The strontium-isotope ages derived on phosphate nodules and phosphatized and non-phosphatized fossils and calcareous nannofossil ages indicate a time interval of phosphogenesis between 13.5 and 7.5 Ma, with two clusters at 12 and 10.5 Ma. The glauconite and phosphate-rich sediments resulted from a current-dominated regime, which was characterized by low overall sedimentation rates, erosion and sediment reworking, and authigenesis. This regime was likely related to a generally westward-directed bottom current, which was forced to upwell once it arrived at the western border of the eastern Mediterranean basin. The timing of the principal phosphogenic phases can only partly be correlated to those of other occurrences in this part of the Mediterranean (Malta, Gozo, southern Sicily, Matese, Latium-Abruzzi platform). The partial diachrony in phosphogenesis may express the effect of lateral switching in and/or focusing of upwelling zones. (C) 2015 Elsevier B.V. All rights reserved.
Ultrahigh-pressure (UHP), coesite-bearing edogites in the Himalaya have been documented from the Kaghan Valley in Pakistan and the Tso Morani area in northwest India. These complexes are part of the northern edge of the Indian plate that has been subducted to, and metamorphosed at, mantle depths of more than 100 km before being exhumed. Both UHP complexes are located today directly adjacent to the Indus-Tsangpo suture zone and are not separated by non-metamorphosed sequences of Tethyan sediments from the Asian margin. Herein, we present new data for one fresh coesite-bearing eclogite from the Tso Moran massif. Therein, garnets are zoned reflecting their growth during prograde and peak metamorphism and showing a thin retrograde overgrowth. Inclusions can be directly correlated to the compositional zoning and are seen as either relicts of the protolith mineral paragenesis and as "snap shots" of the mineral paragenesis during subduction and under peak conditions. Rare earth element concentrations (REE) were obtained for garnet, mineral inclusions in garnet and matrix minerals. The REE pattern in garnet reflects a sequential change in matrix minerals and their proportions due to net transfer reactions during subduction and peak metamorphism. Using conventional geothermobarometry, a peak pressure of ca. 44-48 kbar at 560-760 degrees C followed by an S-shaped exhumation curve has been deduced. Gibbs free energy minimization modelling was used to supplement our analytical findings. (C) 2015 Elsevier B.V. All rights reserved.
Samples of 474 forest stands in Germany were analysed for concentrations of polycyclic aromatic hydrocarbons (PAHs) in three sampling depths. Enhanced concentrations were mainly found at spots relatively close to densely industrialized and urbanized regions and at some topographically elevated areas. Average enrichment factors between mineral soil and humic layer depend on humus type i.e. decrease from mull via moder to more Based on their compound-patterns, the observed samples could be assigned to three main clusters. For some parts of our study area a uniform assignment of samples to clusters over larger regions could be identified. For instance, samples taken at vicinity to brown-coal strip-mining districts are characterized by high relative abundances of low-molecular-weight PAHs. These results suggest that PAHs are more likely originated from local and regional emitters rather than from long-range transport and that specific source-regions can be identified based on PAH fingerprints. (C) 2015 Elsevier Ltd. All rights reserved.
Sequences of coral reef terraces characterized by staircase morphologies and a homogeneous lithology make them appropriate to isolate the influence of uplift on drainage morphology. Along the northern coast of Sumba Island, Indonesia, we investigated the correlations between landscape morphology and uplift rates, which range from 0.02 to 0.6 mm.yr(-1). We studied eight morphometric indices at two scales: whole island (similar to 11,000 km(2)) and within sequences of reefal terraces (similar to 3000 km(2)). At the latter scale, we extracted morphometric indices for 15 individual catchments draining mostly the reefal terraces and for 30 areas undergoing specific ranges of uplift rates draining only the reefal terraces. Indices extracted from digital elevation models include residual relief, incision, stream gradient indices (SL and k(sn)), the hypsometric integral, drainage area, mean relief, and the shape factor. We find that SL, the hypsometric integral, mean relief and the shape factor of catchments positively correlate with uplift rates, whereas incision, residual relief, and k(sn) do not. More precisely, we find that only the areas that are uplifting at a rate faster than 03 mm.yr(-1) can yield the extreme values for these indices, implying that these extreme values are indicative of fast uplifting areas. However, the relationship is not bivalent because any uplift rate can be associated with low values of the same indices. For all indices, the transient conditions of the drainage influence the correlation with Pleistocene mean uplift rates, illustrating the necessity to extract morphometric indices with an appropriate choice of catchment scale. This type of analysis helps to identify the morphometric indices that are most useful for tectonic analysis in areas of unknown uplift, allowing for easy identification of short spatial variations of uplift rate and detection of areas with relatively fast uplift rates in unstudied coastal zones. (C) 2015 Elsevier B.V. All rights reserved.
The causes for the formation of large igneous provinces and hotspot trails are still a matter of considerable dispute. Seismic tomography and other studies suggest that hot mantle material rising from the core-mantle boundary (CMB) might play a significant role in the formation of such hotspot trails. An important area to verify this concept is the South Atlantic region, with hotspot trails that spatially coincide with one of the largest low-velocity regions at the CMB, the African large low shear-wave velocity province. The Walvis Ridge started to form during the separation of the South American and African continents at ca. 130 Ma as a consequence of Gondwana breakup. Here, we present the first deep-seismic sounding images of the crustal structure from the landfall area of the Walvis Ridge at the Namibian coast to constrain processes of plume-lithosphere interaction and the formation of continental flood basalts (Parana and Etendeka continental flood basalts) and associated intrusive rocks. Our study identified a narrow region (<100 km) of high-seismic-velocity anomalies in the middle and lower crust, which we interpret as a massive mafic intrusion into the northern Namibian continental crust. Seismic crustal reflection imaging shows a flat Moho as well as reflectors connecting the high-velocity body with shallow crustal structures that we speculate to mark potential feeder channels of the Etendeka continental flood basalt. We suggest that the observed massive but localized mafic intrusion into the lower crust results from similar-sized variations in the lithosphere (i.e., lithosphere thickness or preexisting structures).
Extreme droughts, heat waves, frosts, precipitation, wind storms and other climate extremes may impact the structure, composition and functioning of terrestrial ecosystems, and thus carbon cycling and its feedbacks to the climate system. Yet, the interconnected avenues through which climate extremes drive ecological and physiological processes and alter the carbon balance are poorly understood. Here, we review the literature on carbon cycle relevant responses of ecosystems to extreme climatic events. Given that impacts of climate extremes are considered disturbances, we assume the respective general disturbance-induced mechanisms and processes to also operate in an extreme context. The paucity of well-defined studies currently renders a quantitative meta-analysis impossible, but permits us to develop a deductive framework for identifying the main mechanisms (and coupling thereof) through which climate extremes may act on the carbon cycle. We find that ecosystem responses can exceed the duration of the climate impacts via lagged effects on the carbon cycle. The expected regional impacts of future climate extremes will depend on changes in the probability and severity of their occurrence, on the compound effects and timing of different climate extremes, and on the vulnerability of each land-cover type modulated by management. Although processes and sensitivities differ among biomes, based on expert opinion, we expect forests to exhibit the largest net effect of extremes due to their large carbon pools and fluxes, potentially large indirect and lagged impacts, and long recovery time to regain previous stocks. At the global scale, we presume that droughts have the strongest and most widespread effects on terrestrial carbon cycling. Comparing impacts of climate extremes identified via remote sensing vs. ground-based observational case studies reveals that many regions in the (sub-)tropics are understudied. Hence, regional investigations are needed to allow a global upscaling of the impacts of climate extremes on global carbon-climate feedbacks.
Stream restoration aims at an enhancement of ecological habitats, an increase of water retention within a landscape and sometimes even at an improvement of biogeochemical functions of lotic ecosystems. For the latter, good exchange between groundwater and stream water is often considered to be of major importance. In this study hydraulic connectivity between river and aquifer was investigated for a four years period, covering the restoration of an old oxbow after the second year. The oxbow became reconnected to the stream and the clogging layer in the oxbow was excavated. We expected increasing hydraulic connectivity between oxbow and aquifer after restoration of the stream, and decreasing hydraulic connectivity for the former shortcut due to increased clogging. To test that hypothesis, the spatial and temporal characteristics of the coupled groundwater-stream water system before and after the restoration were analysed by principal component analyses of time series of groundwater heads and stream water levels. The first component depicted between 53% and 70% of the total variance in the dataset for the different years. It captured the propagation of the pressure signal induced by stream water level fluctuations throughout the adjacent aquifer. Thus it could be used as a measure of hydraulic connectivity between stream and aquifer. During the first year, the impact of stream water level fluctuations decreased with distance from the regulated river (shortcut), whereas the hydraulic connection of the oxbow to the adjacent aquifer was very low. After restoration of the stream we observed a slight but not significant increase of hydraulic connectivity in the oxbow in the second year after restoration, but no change for the former shortcut. There is some evidence that the pattern of hydraulic connectivity at the study site is by far more determined by the natural heterogeneity of hydraulic conductivities of the floodplain sediments and the initial construction of the shortcut rather than by the clogging layer in the oxbow. (C) 2015 The Authors. Published by Elsevier B.V.
Earth's life-support systems are in rapid decline, yet we have few metrics or indicators with which to track these changes. The world's governments are calling for biodiversity and ecosystem-service monitoring to guide and evaluate international conservation policy as well as to incorporate natural capital into their national accounts. The Group on Earth Observations Biodiversity Observation Network (GEO BON) has been tasked with setting up this monitoring system. Here we explore the immediate feasibility of creating a global ecosystem-service monitoring platform under the GEO BON framework through combining data from national statistics, global vegetation models, and production function models. We found that nine ecosystem services could be annually reported at a national scale in the short term: carbon sequestration, water supply for hydropower, and non-fisheries marine products, crop, livestock, game meat, fisheries, mariculture, and timber production. Reported changes in service delivery over time reflected ecological shocks (e.g., droughts and disease outbreaks), highlighting the immediate utility of this monitoring system. Our work also identified three opportunities for creating a more comprehensive monitoring system. First, investing in input data for ecological process models (e.g., global land-use maps) would allow many more regulating services to be monitored. Currently, only 1 of 9 services that can be reported is a regulating service. Second, household surveys and censuses could help evaluate how nature affects people and provides non-monetary benefits. Finally, to forecast the sustainability of service delivery, research efforts could focus on calculating the total remaining biophysical stocks of provisioning services. Regardless, we demonstrated that a preliminary ecosystem-service monitoring platform is immediately feasible. With sufficient international investment, the platform could evolve further into a much-needed system to track changes in our planet's life-support systems. (C) 2015 Elsevier Ltd. All rights reserved.
Remote sensing technology serves as a powerful tool for analyzing geospatial characteristics of flood inundation events at various scales. However, the performance of remote sensing methods depends heavily on the flood characteristics and landscape settings. Difficulties might be encountered in mapping the extent of localized flooding with shallow water on riverine floodplain areas, where patches of herbaceous vegetation are interspersed with open water surfaces. To address the difficulties in mapping inundation on areas with complex water and vegetation compositions, a high spatial resolution dataset has to be used to reduce the problem of mixed pixels. The main objective of our study was to investigate the possibilities of using a single date WorldView-2 image of very high spatial resolution and supporting data to analyze spatial patterns of localized flooding on a riverine floodplain. We used a decision tree algorithm with various combinations of input variables including spectral bands of the WorldView-2 image, selected spectral indices dedicated to mapping water surfaces and vegetation, and topographic data. The overall accuracies of the twelve flood extent maps derived with the decision tree method and performed on both pixels and image objects ranged between 77% and 95%. The highest mapping overall accuracy was achieved with a method that utilized all available input data and the object-based image analysis. Our study demonstrates the possibility of using single date WorldView-2 data for analyzing flooding events at high spatial detail despite the absence of spectral bands from the short-waveform region that are frequently used in water related studies. Our study also highlights the importance of topographic data in inundation analyses. The greatest difficulties were met in mapping water surfaces under dense canopy herbaceous vegetation, due to limited water surface exposure and the dominance of vegetation reflectance.
Endosulfan - an agricultural insecticide and banned by Stockholm Convention - is produced as a 2:1 to 7:3 mixture of isomers endosulfan I (ESI) and endosulfan II (ESII). Endosulfan is transformed under aerobic conditions into endosulfan sulfate (ESS). The study shows for 76 sampling locations in German forests that endosulfan is abundant in all samples with an opposite ratio between the ESI and ESII than the technical product, where the main metabolite ESS is found with even higher abundance. The ratio between ESI/ESII and ESS show clear dependence on the type of stands (coniferous vs. deciduous) and humus type and increases from deciduous via mixed to coniferous forest stands. The study argues for a systematic monitoring of ESI, ESII, and ESS and underlines the need for further research, specifically on the fate of endosulfan including biomagnifications and bioaccumulation in soil. (C) 2015 Elsevier Ltd. All rights reserved.
Dinosterol delta D values in stratified tropical lakes (Cameroon) are affected by eutrophication
(2015)
In freshwater settings, dinosterol (4 alpha,23,24-trimethyl-5 alpha-cholest-22E-en-3 beta-ol) is produced primarily by dinoflagellates, which encompass various species including autotrophs, mixotrophs and heterotrophs. Due to its source specificity and occurrence in lake and marine sediments, its presence and hydrogen isotopic composition (delta D) should be valuable proxies for paleohydrological reconstruction. However, because the purity required for hydrogen isotope measurements is difficult to achieve using standard wet chemical purification methods, their potential as a paleohydrological proxy is rarely exploited. In this study, we tested delta D values of dinosterol in both particulate organic matter (POM) and sediments of stratified tropical freshwater lakes (from Cameroon) as a paleohydrological proxy, the lakes being characterized by variable degrees of eutrophication. In POM and sediment samples, the delta D values of dinosterol correlated with lake water delta D values, confirming a first order influence of source water delta D values. However, we observed that sedimentary dinosterol was D enriched from ca. 19 to 54% compared with POM dinosterol. The enrichment correlated with lake water column conditions, mainly the redox potential at the oxic-anoxic interface (E-h OAI). The observations suggest that paleohydrologic reconstruction from delta D values of dinosterol in the sediments of stratified tropical lakes ought to be sensitive to the depositional environment, in addition to lake water delta D values, with more positive dinosterol delta values potentially reflecting increasing lake eutrophication. Furthermore, in lake sediments, the concentration of partially reduced vs. non-reduced C-34 botryococcenes, stanols vs. stenols, and bacterial (diploptene, diplopterol and beta beta-bishomohopanol) vs. planktonic/terrestrial lipids (cholesterol, campesterol and dinosterol) correlated with Eh OAI. We suggest using such molecular proxies for lake redox conditions in combination with dinosterol delta D values to evaluate the effect of lake trophic status on sedimentary dinosterol delta D values, as a basis for accurately reconstructing tropical lake water delta D values. (C) 2015 Elsevier Ltd. All rights reserved.
Numerous studies investigated the influence of abiotic (meteorological conditions) and biotic factors (tree characteristics) on stemflow generation. Although these studies identified the variables that influence stemflow volumes in simply structured forests, the combination of tree characteristics that allows a robust prediction of stemflow volumes in species-rich forests is not well known. Many hydrological applications, however, require at least a rough estimate of stemflow volumes based on the characteristics of a forest stand. The need for robust predictions of stemflow motivated us to investigate the relationships between tree characteristics and stemflow volumes in a species-rich tropical forest located in central Panama. Based on a sampling setup consisting of ten rainfall collectors, 300 throughfall samplers and 60 stemflow collectors and cumulated data comprising 26 rain events, we derive three main findings. Firstly, stemflow represents a minor hydrological component in the studied 1-ha forest patch (1.0% of cumulated rainfall). Secondly, in the studied species-rich forest, single tree characteristics are only weakly related to stemflow volumes. The influence of multiple tree parameters (e.g. crown diameter, presence of large epiphytes and inclination of branches) and the dependencies among these parameters require a multivariate approach to understand the generation of stemflow. Thirdly, predicting stemflow in species-rich forests based on tree parameters is a difficult task. Although our best model can capture the variation in stemflow to some degree, a critical validation reveals that the model cannot provide robust predictions of stemflow. A reanalysis of data from previous studies in species-rich forests corroborates this finding. Based on these results and considering that for most hydrological applications, stemflow is only one parameter among others to estimate, we advocate using the base model, i.e. the mean of the stemflow data, to quantify stemflow volumes for a given study area. Studies in species-rich forests that wish to obtain predictions of stemflow based on tree parameters probably need to conduct a much more extensive sampling than currently implemented by most studies. Copyright (c) 2015 John Wiley & Sons, Ltd.
Exploring, exploiting and evolving diversity of aquatic ecosystem models: a community perspective
(2015)
Here, we present a community perspective on how to explore, exploit and evolve the diversity in aquatic ecosystem models. These models play an important role in understanding the functioning of aquatic ecosystems, filling in observation gaps and developing effective strategies for water quality management. In this spirit, numerous models have been developed since the 1970s. We set off to explore model diversity by making an inventory among 42 aquatic ecosystem modellers, by categorizing the resulting set of models and by analysing them for diversity. We then focus on how to exploit model diversity by comparing and combining different aspects of existing models. Finally, we discuss how model diversity came about in the past and could evolve in the future. Throughout our study, we use analogies from biodiversity research to analyse and interpret model diversity. We recommend to make models publicly available through open-source policies, to standardize documentation and technical implementation of models, and to compare models through ensemble modelling and interdisciplinary approaches. We end with our perspective on how the field of aquatic ecosystem modelling might develop in the next 5-10 years. To strive for clarity and to improve readability for non-modellers, we include a glossary.
Our understanding of the impact of climate-driven environmental change on prehistoric human populations is hampered by the scarcity of continuous paleoenvironmental records in the vicinity of archaeological sites. Here we compare a continuous paleoclimatic record of the last 20 ka before present from the Chew Bahir basin, southwest Ethiopia, with the available archaeological record of human presence in the region. The correlation of this record with orbitally-driven insolation variations suggests a complex nonlinear response of the environment to climate forcing, reflected in several long-term and short-term transitions between wet and dry conditions, resulting in abrupt changes between favorable and unfavorable living conditions for humans. Correlating the archaeological record in the surrounding region of the Chew Bahir basin, presumably including montane and lake-marginal refugia for human populations, with our climate record suggests a complex interplay between humans and their environment during the last 20 ka. The result may contribute to our understanding of how a dynamic environment may have impacted the adaptation and dispersal of early humans in eastern Africa. (C) 2015 Elsevier Ltd. All rights reserved.
Dynamics of solute export from catchments can be classified in terms of chemostatic and chemodynamic export regimes by an analysis of concentration-discharge relationships. Previous studies hypothesized that distinct export regimes emerge from the presence of solute mass stores within the catchment and their connectivity to the stream. However, so far a direct link of solute export to identifiable catchment characteristics is missing. Here we investigate long-term time series of stream water quality and quantity of nine neighboring catchments in Central Germany ranging from relatively pristine mountain catchments to agriculturally dominated lowland catchments, spanning large gradients in land use, geology, and climatic conditions. Given the strong collinearity of catchment characteristics we used partial least square regression analysis to quantify the predictive power of these characteristics for median concentrations and the metrics of export regime. We can show that median concentrations and metrics of the export regimes of major ions and nutrients can indeed be inferred from catchment characteristics. Strongest predictors for median concentrations were the share of arable land, discharge per area, runoff coefficient and available water capacity in the root zone of the catchments. The available water capacity in the root zone, the share of arable land being artificially drained and the topographic gradient were found to be the most relevant predictors for the metrics of export regime. These catchment characteristics can represent the size of solute mass store such as the fraction of arable land being a measure for the store of nitrate. On the other hand, catchment characteristics can be a measure for the connectivity of these solute stores to the stream such as the fraction of tile drained land in the catchments. This study demonstrates the potential of data-driven, top down analyses using simple metrics to classify and better understand dominant controls of solute export from catchments. (C) 2015 Elsevier Ltd. All rights reserved.
We propose a RAndom Interacting Network (RAIN) model to study the interactions between a pair of complex networks. The model involves two major steps: (i) the selection of a pair of nodes, one from each network, based on intra-network node-based characteristics, and (ii) the placement of a link between selected nodes based on the similarity of their relative importance in their respective networks. Node selection is based on a selection fitness function and node linkage is based on a linkage probability defined on the linkage scores of nodes. The model allows us to relate within-network characteristics to between-network structure. We apply the model to the interaction between the USA and Schengen airline transportation networks (ATNs). Our results indicate that two mechanisms: degree-based preferential node selection and degree-assortative link placement are necessary to replicate the observed inter-network degree distributions as well as the observed inter-network assortativity. The RAIN model offers the possibility to test multiple hypotheses regarding the mechanisms underlying network interactions. It can also incorporate complex interaction topologies. Furthermore, the framework of the RAIN model is general and can be potentially adapted to various real-world complex systems.
The study reported here evaluates the degree to which metals, salt anions and organic compounds are released from shales by exposure to water, either in its pure form or mixed with additives commonly employed during shale gas exploitation. The experimental conditions used here were not intended to simulate the exploitation process itself, but nevertheless provided important insights into the effects additives have on solute partition behaviour under oxic to sub-oxic redox conditions.
In order to investigate the mobility of major (e.g. Ca, Fe) and trace (e.g. As, Cd, Co, Mo, Pb, U) elements and selected organic compounds, we performed leaching tests with black shale samples from Bornholm, Denmark and Lower Saxony, Germany. Short-term experiments (24 h) were carried out at ambient pressure and temperatures of 100 degrees C using five different lab-made stimulation fluids. Two long-term experiments under elevated pressure and temperature conditions at 100 degrees C/100 bar were performed lasting 6 and 2 months, respectively, using a stimulation fluid containing commercially-available biocide, surfactant, friction reducer and clay stabilizer.
Our results show that the amount of dissolved constituents at the end of the experiment is independent of the pH of the stimulation fluid but highly dependent on the composition of the black shale and the buffering capacity of specific components, namely pyrite and carbonates. Shales containing carbonates buffer the solution at pH 7-8. Sulphide minerals (e.g. pyrite) become oxidized and generate sulphuric acid leading to a pH of 2-3. This low pH is responsible for the overall much larger amount of cations dissolved from shales containing pyrite but little to no carbonate. The amount of elements released into the fluid is also dependent on the residence time, since as much as half of the measured 23 elements show highest concentrations within four days. Afterwards, the concentration of most of the elemental species decreased pointing to secondary precipitations. Generally, in our experiments less than 15% of each analysed element contained in the black shale was mobilised into the fluid. (C) 2015 Elsevier Ltd. All rights reserved.
With less than two decades of activity, research on melt inclusions (MI) in crystals from rocks that have undergone crustal anatexis - migmatites and granulites - is a recent addition to crustal petrology and geochemistry. Studies on this subject started with glassy inclusions in anatectic crustal enclaves in lavas, and then progressed to regionally metamorphosed and partially melted crustal rocks, where melt inclusions are normally crystallized into a cryptocrystalline aggregate (nanogranitoid).
Since the first paper on melt inclusions in the granulites of the Kerala Khondalite Belt in 2009, reported and studied occurrences are already a few tens. Melt inclusions in migmatites and granulites show many analogies with their more common and long studied counterparts in igneous rocks, but also display very important differences and peculiarities, which are the subject of this review. Microstructurally, melt inclusions in anatectic rocks are small, commonly 10 mu m in diameter, and their main mineral host is peritectic garnet, although several other hosts have been observed. Inclusion contents vary from glass in enclaves that were cooled very rapidly from supersolidus temperatures, to completely crystallized material in slowly cooled regional migmatites. The chemical composition of the inclusions can be analyzed combining several techniques (SEM, EMP, NanoSIMS, LA-ICP-MS), but in the case of crystallized inclusions the experimental remelting under confining pressure in a piston cylinder is a prerequisite. The melt is generally granitic and peraluminous, although granodioritic to trondhjemitic compositions have also been found.
Being mostly primary in origin, inclusions attest for the growth of their peritectic host in the presence of melt. As a consequence, the inclusions have the unique ability of preserving information on the composition of primary anatectic crustal melts, before they undergo any of the common following changes in their way to produce crustal magmas. For these peculiar features, melt inclusions in migmatites and granulites, largely overlooked so far, have the potential to become a fundamental tool for the study of crustal melting, crustal differentiation, and even the generation of the continental crust. (C) 2015 The Authors. Published by Elsevier B.V.
The Tian Shan range is an inherited intracontinental structure reactivated by the far-field effects of the India-Asia collision. A growing body of thermochronology and magnetostratigraphy datasets shows that the range grew through several tectonic pulses since similar to 25 Ma, however the early Cenozoic history remains poorly constrained. The time-lag between the Eocene India-Asia collision and the Miocene onset of Tian Shan exhumation is particularly enigmatic. This peculiar period is potentially recorded along the southwestern Tian Shan piedmont. There, late Eocene marine deposits of the proto-Paratethys epicontinental sea transition to continental foreland basin sediments of unknown age were recently dated. We provide magnetostratigraphic dating of these continental sediments from the 1700-m-thick Mine section integrated with previously published detrital apatite fission track and U/Pb zircon ages. The most likely correlation to the geomagnetic polarity time scale indicates an age span from 20.8 to 13.3 Ma with a marked increase in accumulation rates at 19-18 Ma. This implies that the entire Oligocene period is missing between the last marine and first continental sediments, as suggested by previous southwestern Tian Shan results. This differs from the southwestern Tarim basin where Eocene marine deposits are continuously overlain by late Eocene-Oligocene continental sediments. This supports a simple evolution model of the western Tarim basin with Eocene-Oligocene foreland basin activation to the south related to northward thrusting of the Kunlun Shan, followed by early Miocene activation of northern foreland basin related to overthrusting of the south Tian Shan. Our data also support southward propagation of the Tian Shan piedmont from 20 to 18 Ma that may relate to motion on the Talas Fergana Fault. The coeval activation of a major right-lateral strike-slip system allowing indentation of the Pamir Salient into the Tarim basin, suggests far-field deformation from the India-Asia collision zone affected the Tian Shan and the Talas Fergana fault by early Miocene. (C) 2015 Elsevier B.V. All rights reserved.
Wasser für Arkadien
(2015)
The ecohydrological transfers, interactions and degradation arising from high-intensity storm events
(2015)
In this study we investigate a dayside, midlatitude plasma depletion (DMLPD) encountered on 22 May 2014 by the Swarm and GRACE satellites, as well as ground-based instruments. The DMLPD was observed near Puerto Rico by Swarm near 10 LT under quiet geomagnetic conditions at altitudes of 475-520 km and magnetic latitudes of similar to 25 degrees-30 degrees. The DMLPD was also revealed in total electron content observations by the Saint Croix station and by the GRACE satellites (430 km) near 16 LT and near the same geographic location. The unique Swarm constellation enables the horizontal tilt of the DMLPD to be measured (35 degrees clockwise from the geomagnetic east-west direction). Ground-based airglow images at Arecibo showed no evidence for plasma density depletions during the night prior to this dayside event. The C/NOFS equatorial satellite showed evidence for very modest plasma density depletions that had rotated into the morningside from nightside. However, the equatorial depletions do not appear related to the DMLPD, for which the magnetic apex height is about 2500 km. The origins of the DMLPD are unknown, but may be related to gravity waves.
In this study, influence of feedwater pH (2-12) was studied for hydrothermal carbonization (HTC) of wheat straw at 200 and 260 degrees C. Acetic acid and KOH were used as acidic and basic medium, respectively. Hydrochars were characterized by elemental and fiber analyses, SEM, surface area, pore volume and size, and ATR-FTIR, while HTC process liquids were analyzed by HPLC and GC. Both hydrochar and HTC process liquid qualities vary with feedwater pH. At acidic pH, cellulose and elemental carbon increase in hydrochar, while hemicellulose and pseudo-lignin decrease. Hydrochars produced at pH 2 feedwater has 2.7 times larger surface area than that produced at pH 12. It also has the largest pore volume (1.1 x 10(-1) ml g(-1)) and pore size (20.2 nm). Organic acids were increasing, while sugars were decreasing in case of basic feedwater, however, phenolic compounds were present only at 260 degrees C and their concentrations were increasing in basic feedwater. (C) 2015 Elsevier Ltd. All rights reserved.
Land-use concepts provide decision support for the most efficient usage options according to sustainable development and multifunctionality requirements. However, developments in landscape-related, agricultural production schemes are primarily driven by economic benefits. Therefore, most agricultural land-use concepts tackle particular problems or interests and lack a systemic perspective. As a result, we discuss a conceptual model for future site-specific agricultural land-use with an inbuilt requirement for adequate experimental sites to enable monitoring systems for a new generation of ecosystem models and for new approaches to address science-stakeholder interactions.
Runoff, especially during summer months, and low flows have decreased in Central and Eastern Europe during the last decades. A detailed knowledge on predictors and dependencies between meteorological forcing, catchment properties and low flow is necessary to optimize regional adaption strategies to sustain minimum runoff. The objective of this study is to identify low flow predictors for 16 small catchments in Northeast Germany and their long-term shifts between 1965 and 2006. Non-linear regression models (support vector machine regression) were calibrated to iteratively select the most powerful low flow predictors regarding annual 30-day minimum flow (AM(30)). The data set consists of standardized precipitation (SPI) and potential evapotranspiration (SpETI) indices on different time scales and lag times. The potential evapotranspiration of the previous 48 and 3 months, as well as the precipitation of the previous 3 months and last year were the most relevant predictors for AM(30). Pearson correlation (r(2)) of the final model is 0.49 and if for every year the results for all catchments are averaged r(2) increases to 0.80 because extremes are smoothing out. Evapotranspiration was the most important low flow predictor for the study period. However, distinct long-term shifts in the predictive power of variables became apparent. The potential evapotranspiration of the previous 48 months explained most of the variance, but its relevance decreased during the last decades. The importance of precipitation variables increased with time. Model performance was higher at catchments with a more damped discharge behavior. The results indicate changes in the relevant processes or flow paths generating low flows. The identified predictors, temporal patterns and patterns between catchments will support the development of low flow monitoring systems and determine those catchments where adaption measures should aim more at increasing groundwater recharge. (C) 2014 Elsevier B.V. All rights reserved.
With accelerating climate cooling in the late Cenozoic, glacial and periglacial erosion became more widespread on the surface of the Earth. The resultant shift in erosion patterns significantly changed the large-scale morphology of many mountain ranges worldwide. Whereas the glacial fingerprint is easily distinguished by its characteristic fjords and U-shaped valleys, the periglacial fingerprint is more subtle but potentially prevails in some mid- to high-latitude landscapes. Previous models have advocated a frost-driven control on debris production at steep headwalls and glacial valley sides. Here we investigate the important role that periglacial processes also play in less steep parts of mountain landscapes. Understanding the influences of frost-driven processes in low-relief areas requires a focus on the consequences of an accreting soil mantle, which characterises such surfaces. We present a new model that quantifies two key physical processes: frost cracking and frost creep, as a function of both temperature and sediment thickness. Our results yield new insights into how climate and sediment transport properties combine to scale the intensity of periglacial processes. The thickness of the soil mantle strongly modulates the relation between climate and the intensity of mechanical weathering and sediment flux. Our results also point to an offset between the conditions that promote frost cracking and those that promote frost creep, indicating that a stable climate can provide optimal conditions for only one of those processes at a time. Finally, quantifying these relations also opens up the possibility of including periglacial processes in large-scale, long-term landscape evolution models, as demonstrated in a companion paper.
The periglacial engine of mountain erosion - Part 2: Modelling large-scale landscape evolution
(2015)
There is growing recognition of strong periglacial control on bedrock erosion in mountain landscapes, including the shaping of low-relief surfaces at high elevations (summit flats). But, as yet, the hypothesis that frost action was crucial to the assumed Late Cenozoic rise in erosion rates remains compelling and untested. Here we present a landscape evolution model incorporating two key periglacial processes - regolith production via frost cracking and sediment transport via frost creep - which together are harnessed to variations in temperature and the evolving thickness of sediment cover. Our computational experiments time-integrate the contribution of frost action to shaping mountain topography over million-year timescales, with the primary and highly reproducible outcome being the development of flattish or gently convex summit flats. A simple scaling of temperature to marine delta O-18 records spanning the past 14 Myr indicates that the highest summit flats in mid-to high-latitude mountains may have formed via frost action prior to the Quaternary. We suggest that deep cooling in the Quaternary accelerated mechanical weathering globally by significantly expanding the area subject to frost. Further, the inclusion of subglacial erosion alongside periglacial processes in our computational experiments points to alpine glaciers increasing the long-term efficiency of frost-driven erosion by steepening hillslopes.
The India-Asia suture zone of southern Tibet exposes Lower Cretaceous Xigaze ophiolites and radiolarian cherts, and time-equivalent Asian-derived clastic forearc sedimentary rocks (Xigaze Group). These ophiolites have been interpreted to have formed in the forearc of the north-dipping subduction zone below Tibet that produced the Gangdese magmatic arc around 15-20 degrees N, or in the forearc of a subequatorial intra-oceanic subduction zone. To better constrain the latitude of the ophiolites, we carried out an integrated paleomagnetic, geochronologic and stratigraphical study on epi-ophiolitic radiolarites (Chongdui and Bainang sections), and Xigaze Group turbiditic sandstones unconformably overlying the ophiolite's mantle units (Sangsang section). Detrital zircon U-Pb geochronology of tuffaceous layers from the Chongdui section and sandstones of the Xigaze Group at the Sangsang section provides maximum depositional ages of 116.5 +/- 3.1 Ma and 128.8 +/- 3.4 Ma, respectively, for the Chongdui section and an Asian provenance signature for the Xigaze Group. Paleomagnetic analyses, integrated with rock magnetic experiments, indicate significant compaction-related inclination 'shallowing' of the remanence within the studied rocks. Two independent methods are applied for the inclination shallowing correction of the paleomagnetic directions from the Sangsang section, yielding consistent mean paleolatitudes of 16.2 degrees N 113 degrees N, 20.9 degrees N] and 16.8 degrees N [11.1 degrees N, 23.3 degrees N], respectively. These results are indistinguishable from recent paleolatitude estimates for the Gangdese arc in southern Tibet. Radiolarites from the Chongdui and Bainang sections yield low paleomagnetic inclinations that would suggest a sub-equatorial paleolatitude, but the distribution of the paleomagnetic directions in these rocks strongly suggests a low inclination bias by compaction. Our data indicate that spreading of the Xigaze ophiolite occurred in the Gangdese forearc, and formed the basement of the forearc strata. (C) 2015 Elsevier B.V. All rights reserved.
Biogenic silicon (BSI) pools influence Si cycling in terrestrial ecosystems. As research has been focused mainly on phytogenic BSi pools until now, there is only little information available on quantities of other BSi pools. There are no systematic studies on protozoic Si pools - here represented by idiosomic testate amoebae (TA) - and abiotic and biotic influences in temperate forest ecosystems. We selected ten old forests along a strong gradient in soil forming factors (especially parent material and climate), soil properties and humus forms. We quantified idiosomic Si pools, corresponding annual biosilicification, plant-available and amorphous Si fractions of topsoil horizons. Furthermore, we analyzed the potential influences of abiotic factors (e.g. soil pH) and earthworms on idiosomic Si pools.
While idiosomic Si pools were relatively small (up to 5 kg Si ha(-1)), annual biosilicification rates of living TA (17-80 kg Si ha(-1)) were comparable to or even exceeded reported data of annual Si uptake by trees. Soil pH exerted a strong, non-linear control on plant-available Si. Surprisingly, no relationship between Si supply and idiosomic Si pools could be found (no Si limitation). Instead, idiosomic Si pools showed a strong, negative relationship to earthworm biomasses, which corresponded to humus forms. We concluded that earthworms control idiosomic Si pools in forest soils by direct (feeding, competition) and/or indirect mechanisms (e.g. change of habitat structure). Earthworms themselves were strongly influenced by soil pH: Below a threshold of pH 3.8 no endogeic or anecic earthworms existed. As soil pH is a result of weathering and acidification idiosomic Si pools are indirectly, but ultimately controlled by soil forming factors, mainly parent material and climate. (C) 2014 Elsevier B.V. All rights reserved.
For karstified aquifer systems, numerical models of groundwater flow are difficult to setup and parameterize. However, a system understanding useful for groundwater management may be obtained without applying overly complicated models. In this study, we demonstrate for a karstified carbonate aquifer in south-western Germany that a combination of methods with moderate data requirements can be used to infer flowpaths and transit times of groundwater to production wells.
The organic matter (OM) in biopore walls and aggregate coatings may be important for sorption of reactive solutes and water as well as for solute mass exchange between the soil matrix and the preferential flow (PF) domains in structured soil. Structural surfaces are coated by illuvial clay-organic material and by OM of different origin, e.g., earthworm casts and root residues. The objectives were to verify the effect of OM on wettability and infiltration of intact structural surfaces in clay-illuvial horizons (Bt) of Luvisols and to investigate the relevance of the mm-scale distribution of OM composition on the water and solute transfer. Intact aggregate surfaces and biopore walls were prepared from Bt horizons of Luvisols developed from Loess and glacial till. The mm-scale spatial distribution of OM composition was scanned using diffuse reflectance infrared Fourier transform (DRIFT) spectroscopy. The ratio between alkyl and carboxyl functional groups in OM was used as potential wettability index (PWI) of the OM. The infiltration dynamics of water and ethanol droplets were determined measuring contact angles (CA) and water drop penetration times (WDPT). At intact surfaces of earthworm burrows and coated cracks of the Loess-Bt, the potential wettability of the OM was significantly reduced compared to the uncoated matrix. These data corresponded to increased WDPT, indicating a mm-scaled sub-critical water repellency. The relation was highly linear for earthworm burrows and crack coatings from the Loess-Bt with WDPT >2.5 s. Other surfaces of the Loess-Bt and most surfaces of the till-derived Bt were not found to be repellent. At these surfaces, no relations between the potential wettability of the OM and the actual wettability of the surface were found. The results suggest that water absorption at intact surface structures, i.e., mass exchange between PF paths and soil matrix, can be locally affected by a mm-scale OM distribution if OM is of increased content and is enriched in alkyl functional groups. For such surfaces, the relation between potential and actual wettability provides the possibility to evaluate the mm-scale spatial distribution of wettability and sorption and mass exchange from DRIFT spectroscopic scanning.
On 11 August 2012 an earthquake doublet (M-w 6.4 and 6.2) occurred near the city of Ahar, northwest Iran. Both events were only 6 km and 11 minutes apart, producing a surface rupture of about 12 km in length. Historical and modern seismicity has so far been sparse in this area. Spatially, the region represents a transitional zone between different tectonic domains, including compression in Iran, westward extrusion of the Anatolian plate, and thrusting beneath the Caucasus.
In this study, we inverted the surface waveforms of the two mainshocks and 11 aftershocks (M-w >= 4.3) to obtain regional seismic moment tensors. The earthquakes analyzed can be grouped into pure strike slip (including the first mainshock) and oblique reverse mechanisms (including the second mainshock). The sequence provides information about faulting mechanisms at the spatial scale of the entire rock volume affected by the earthquake doublet, including coinciding deformation on minor faults (sub) parallel to the main fault and Riedel shears. It occurred on a so far unknown fault structure, which we call the Ahar fault.
Alongside the seismological data, we used geological maps, satellite images, and digital elevation data to analyze the geomorphology of the region. Our analysis suggests that the adjacent North Tabriz fault, which accomodates up to 7 mm/yr of right-lateral strike-slip faulting, does not compensate the entire lateral shear strain, and that part of it is compensated farther north. Combined, our results suggest a temporally and spatially complex style of deformation (reverse and strike slip) overprinting older reverse deformation.
Does textural heterogeneity matter? Quantifying transformation of hydrological signals in soils
(2015)
Textural heterogeneity causes complex water flow patterns and soil moisture dynamics in soils that hamper monitoring and modeling soil hydrological processes. These patterns can be generated by process based models considering soil texture heterogeneities. However, there is urgent need for tools for the inverse approach, that is, to analyze observed dynamics in a quantitative way independent from any model approach in order to identify effects of soil texture heterogeneity. Here, studying the transformation of hydrological input signals (e.g., rainfall, snow melt) propagating through the vadose zone is a promising supplement to the common perspective of mass flux considerations. In this study we applied a recently developed new approach for quantitative analysis of hydrological time series (i) to investigate the effect of soil texture on the signal transformation behavior and (ii) to analyze to what degree soil moisture dynamics from a heterogeneous profile can be reproduced by a corresponding homogenous substrate. We used simulation models to generate three data sets of soil moisture time series considering homogeneous substrates (HOM), homogeneous substrates with noise added (NOISE), and heterogeneous substrates (HET). The soil texture classes sand, loamy sand, clay loam and silt were considered. We applied a principal component analysis (also called empirical orthogonal functions) to identify predominant functional patterns and to measure the degree of signal transformation of single time series. For the HOM case 86.7% of the soil moisture dynamics were reproduced by the first two principal components. Based on these results a quantitative measure for the degree of transformation of the input signal was derived. The general nature of signal transformation was nearly identical in all textures, but the intensity of signal damping per depth interval decreased from fine to coarse textures. The same functional patterns occurred in the HET data set. However, here the signal damping of time series did not increase monotonically with soil depth. The analysis succeeded in extracting the same signal transformation behavior from the NOISE data set compared to that of the HOM case in spite of being blurred by random noise. Thus, principal component analysis proved to be a very robust tool to disentangle between independent effects and to measure the degree of transformation of the input signal. The suggested approach can be used for (i) data processing, including subtracting measurement noise (ii) identification of factors controlling soil water dynamics, (iii) assessing the mean signal transformation in heterogeneous soils based on observed soil moisture time series, and (iv) model building, calibration and evaluation. (C) 2015 Elsevier B.V. All rights reserved.