Refine
Year of publication
Document Type
- Doctoral Thesis (201) (remove)
Keywords
- climate change (16)
- Klimawandel (13)
- Modellierung (9)
- Hochwasser (7)
- Hydrologie (7)
- GIS (5)
- Unsicherheit (5)
- hydrology (5)
- modelling (5)
- uncertainty (5)
Institute
- Institut für Umweltwissenschaften und Geographie (201) (remove)
Over the past decades, natural hazards, many of which are aggravated by climate change and reveal an increasing trend in frequency and intensity, have caused significant human and economic losses and pose a considerable obstacle to sustainable development. Hence, dedicated action toward disaster risk reduction is needed to understand the underlying drivers and create efficient risk mitigation plans. Such action is requested by the Sendai Framework for Disaster Risk Reduction 2015-2030 (SFDRR), a global agreement launched in 2015 that establishes stating priorities for action, e.g. an improved understanding of disaster risk. Turkey is one of the SFDRR contracting countries and has been severely affected by many natural hazards, in particular earthquakes and floods. However, disproportionately little is known about flood hazards and risks in Turkey. Therefore, this thesis aims to carry out a comprehensive analysis of flood hazards for the first time in Turkey from triggering drivers to impacts. It is intended to contribute to a better understanding of flood risks, improvements of flood risk mitigation and the facilitated monitoring of progress and achievements while implementing the SFDRR.
In order to investigate the occurrence and severity of flooding in comparison to other natural hazards in Turkey and provide an overview of the temporal and spatial distribution of flood losses, the Turkey Disaster Database (TABB) was examined for the years 1960-2014. The TABB database was reviewed through comparison with the Emergency Events Database (EM-DAT), the Dartmouth Flood Observatory database, the scientific literature and news archives. In addition, data on the most severe flood events between 1960 and 2014 were retrieved. These served as a basis for analyzing triggering mechanisms (i.e. atmospheric circulation and precipitation amounts) and aggravating pathways (i.e. topographic features, catchment size, land use types and soil properties). For this, a new approach was developed and the events were classified using hierarchical cluster analyses to identify the main influencing factor per event and provide additional information about the dominant flood pathways for severe floods. The main idea of the study was to start with the event impacts based on a bottom-up approach and identify the causes that created damaging events, instead of applying a model chain with long-term series as input and searching for potentially impacting events as model outcomes. However, within the frequency analysis of the flood-triggering circulation pattern types, it was discovered that events in terms of heavy precipitation were not included in the list of most severe floods, i.e. their impacts were not recorded in national and international loss databases but were mentioned in news archives and reported by the Turkish State Meteorological Service. This finding challenges bottom-up modelling approaches and underlines the urgent need for consistent event and loss documentation. Therefore, as a next step, the aim was to enhance the flood loss documentation by calibrating, validating and applying the United Nations Office for Disaster Risk Reduction (UNDRR) loss estimation method for the recent severe flood events (2015-2020). This provided, a consistent flood loss estimation model for Turkey, allowing governments to estimate losses as quickly as possible after events, e.g. to better coordinate financial aid.
This thesis reveals that, after earthquakes, floods have the second most destructive effects in Turkey in terms of human and economic impacts, with over 800 fatalities and US$ 885.7 million in economic losses between 1960 and 2020, and that more attention should be paid on the national scale. The clustering results of the dominant flood-producing mechanisms (e.g. circulation pattern types, extreme rainfall, sudden snowmelt) present crucial information regarding the source and pathway identification, which can be used as base information for hazard identification in the preliminary risk assessment process. The implementation of the UNDRR loss estimation model shows that the model with country-specific parameters, calibrated damage ratios and sufficient event documentation (i.e. physically damaged units) can be recommended in order to provide first estimates of the magnitude of direct economic losses, even shortly after events have occurred, since it performed well when estimates were compared to documented losses.
The presented results can contribute to improving the national disaster loss database in Turkey and thus enable a better monitoring of the national progress and achievements with regard to the targets stated by the SFDRR. In addition, the outcomes can be used to better characterize and classify flood events. Information on the main underlying factors and aggravating flood pathways further supports the selection of suitable risk reduction policies.
All input variables used in this thesis were obtained from publicly available data. The results are openly accessible and can be used for further research.
As an overall conclusion, it can be stated that consistent loss data collection and better event documentation should gain more attention for a reliable monitoring of the implementation of the SFDRR. Better event documentation should be established according to a globally accepted standard for disaster classification and loss estimation in Turkey. Ultimately, this enables stakeholders to create better risk mitigation actions based on clear hazard definitions, flood event classification and consistent loss estimations.
A water quality model for shallow river-lake systems and its application in river basin management
(2007)
This work documents the development and application of a new model for simulating mass transport and turnover in rivers and shallow lakes. The simulation tool called 'TRAM' is intended to complement mesoscale eco-hydrological catchment models in studies on river basin management. TRAM aims at describing the water quality of individual water bodies, using problem- and scale-adequate approaches for representing their hydrological and ecological characteristics. The need for such flexible water quality analysis and prediction tools is expected to further increase during the implementation of the European Water Framework Directive (WFD) as well as in the context of climate change research. The developed simulation tool consists of a transport and a reaction module with the latter being highly flexible with respect to the description of turnover processes in the aquatic environment. Therefore, simulation approaches of different complexity can easily be tested and model formulations can be chosen in consideration of the problem at hand, knowledge of process functioning, and data availability. Consequently, TRAM is suitable for both heavily simplified engineering applications as well as scientific ecosystem studies involving a large number of state variables, interactions, and boundary conditions. TRAM can easily be linked to catchment models off-line and it requires the use of external hydrodynamic simulation software. Parametrization of the model and visualization of simulation results are facilitated by the use of geographical information systems as well as specific pre- and post-processors. TRAM has been developed within the research project 'Management Options for the Havel River Basin' funded by the German Ministry of Education and Research. The project focused on the analysis of different options for reducing the nutrient load of surface waters. It was intended to support the implementation of the WFD in the lowland catchment of the Havel River located in North-East Germany. Within the above-mentioned study TRAM was applied with two goals in mind. In a first step, the model was used for identifying the magnitude as well as spatial and temporal patterns of nitrogen retention and sediment phosphorus release in a 100~km stretch of the highly eutrophic Lower Havel River. From the system analysis, strongly simplified conceptual approaches for modeling N-retention and P-remobilization in the studied river-lake system were obtained. In a second step, the impact of reduced external nutrient loading on the nitrogen and phosphorus concentrations of the Havel River was simulated (scenario analysis) taking into account internal retention/release. The boundary conditions for the scenario analysis such as runoff and nutrient emissions from river basins were computed by project partners using the catchment models SWIM and ArcEGMO-Urban. Based on the output of TRAM, the considered options of emission control could finally be evaluated using a site-specific assessment scale which is compatible with the requirements of the WFD. Uncertainties in the model predictions were also examined. According to simulation results, the target of the WFD -- with respect to total phosphorus concentrations in the Lower Havel River -- could be achieved in the medium-term, if the full potential for reducing point and non-point emissions was tapped. Furthermore, model results suggest that internal phosphorus loading will ease off noticeably until 2015 due to a declining pool of sedimentary mobile phosphate. Mass balance calculations revealed that the lakes of the Lower Havel River are an important nitrogen sink. This natural retention effect contributes significantly to the efforts aimed at reducing the river's nitrogen load. If a sustainable improvement of the river system's water quality is to be achieved, enhanced measures to further reduce the immissions of both phosphorus and nitrogen are required.
Die vorliegende Arbeit 'Abflußentwicklung in Teileinzugsgebieten des Rheins - Simulationen für den Ist-Zustand und für Klimaszenarien' untersucht Auswirkungen möglicher zukünftiger Klimaänderungen auf das Abflußgeschehen in ausgewählten, durch Mittelgebirge geprägten Teileinzugsgebieten des Rheins: Mosel (bis Pegel Cochem); Sieg (bis Pegel Menden 1) und Main (bis Pegel Kemmern).In einem ersten Schritt werden unter Verwendung des hydrologischen Modells HBV-D wichtige Modellprozesse entsprechend der Einzugsgebietscharakteristik parametrisiert und ein Abbild der Gebietshydrologie erzeugt, das mit Zeitreihen gemessener Tageswerte (Temperatur, Niederschlag) eine Zeitreihe der Pegeldurchflüsse simulieren kann. Die Güte der Simulation des Ist-Zustandes (Standard-Meßzeitraum 1.1.1961-31.12.1999) ist für die Kalibrierungs- und Validierungszeiträume in allen Untersuchungsgebieten gut bis sehr gut.Zur Erleichterung der umfangreichen, zeitaufwendigen einzugsgebietsbezogenen Datenaufbereitung für das hydrologische Modell HBV-D wurde eine Arbeitsumgebung auf Basis von Programmerweiterungen des Geoinformationssystems ArcView und zusätzlichen Hilfsprogrammen entwickelt. Die Arbeitsumgebung HBV-Params enthält eine graphische Benutzeroberfläche und räumt sowohl erfahrenen Hydrologen als auch hydrologisch geschulten Anwendern, z.B. Studenten der Vertiefungsrichtung Hydrologie, Flexibilität und vollständige Kontrolle bei der Ableitung von Parameterwerten und der Editierung von Parameter- und Steuerdateien ein. Somit ist HBV-D im Gegensatz zu Vorläuferversionen mit rudimentären Arbeitsumgebungen auch außerhalb der Forschung für Lehr- und Übungszwecke einsetzbar.In einem zweiten Schritt werden Gebietsniederschlagssummen, Gebietstemperaturen und simulierte Mittelwerte des Durchflusses (MQ) des Ist-Zustandes mit den Zuständen zweier Klimaszenarien für den Szenarienzeitraum 100 Jahre später (2061-2099) verglichen. Die Klimaszenarien beruhen auf simulierten Zirkulationsmustern je eines Modellaufes zweier Globaler Zirkulationsmodelle (GCM), die mit einem statistischen Regionalisierungsverfahren in Tageswertszenarien (Temperatur, Niederschlag) an Meßstationen in den Untersuchungsgebieten überführt wurden und als Eingangsdaten des hydrologischen Modells verwendet werden.Für die zweite Hälfte des 21. Jahrhunderts weisen beide regionalisierten Klimaszenarien eine Zunahme der Jahresmittel der Gebietstemperatur sowie eine Zunahme der Jahressummen der Gebietsniederschläge auf, die mit einer hohen Variabilität einhergeht. Eine Betrachtung der saisonalen (monatlichen) Änderungsbeträge von Temperatur, Niederschlag und mittlerem Durchfluß zwischen Szenarienzeitraum (2061-2099) und Ist-Zustand ergibt in allen Untersuchungsgebieten eine Temperaturzunahme (höher im Sommer als im Winter) und eine generelle Zunahme der Niederschlagssummen (mit starken Schwankungen zwischen den Einzelmonaten), die bei der hydrologischen Simulation zu deutlich höheren mittleren Durchflüssen von November bis März und leicht erhöhten mittleren Durchflüssen in den restlichen Monaten führen. Die Stärke der Durchflußerhöhung ist nach den individuellen Klimaszenarien unterschiedlich und im Sommer- bzw. Winterhalbjahr gegenläufig ausgeprägt. Hauptursache für die simulierte starke Zunahme der mittleren Durchflüsse im Winterhalbjahr ist die trotz Temperaturerhöhung der Klimaszenarien winterlich niedrige Evapotranspiration, so daß erhöhte Niederschläge direkt in erhöhten Durchfluß transformiert werden können.Der Vergleich der Untersuchungsgebiete zeigt in Einzelmonaten von West nach Ost abnehmende Änderungsbeträge der Niederschlagssummen, die als Hinweis auf die Bedeutung der Kontinentalitätseinflüsse auch unter geänderten klimatischen Bedingungen in Südwestdeutschland aufgefaßt werden könnten.Aus den regionalisierten Klimaszenarien werden Änderungsbeträge für die Modulation gemessener Zeitreihen mittels synthetischer Szenarien abgeleitet, die mit einem geringen Rechenaufwand in hydrologische Modellantworten überführt werden können. Die direkte Ableitung synthetischer Szenarien aus GCM-Ergebniswerten (bodennahe Temperatur und Gesamtniederschlag) an einzelnen GCM-Gitterpunkten erbrachte unbefriedigende Ergebnisse.Ob, in welcher Höhe und zeitlichen Verteilung die in den (synthetischen) Szenarien verwendeten Niederschlags- und Temperaturänderungen eintreten werden, kann nur die Zukunft zeigen. Eine Abschätzung, wie sich die Abflußverhältnisse und insbesondere die mittleren Durchflüsse der Untersuchungsgebiete bei möglichen Änderungen entwickeln würden, kann jedoch heute schon vorgenommen werden. Simulationen auf Szenariogrundlagen sind ein Weg, unbekannte zukünftige Randbedingungen sowie regionale Auswirkungen möglicher Änderungen des Klimasystems ausschnittsweise abzuschätzen und entsprechende Risikominderungsstrategien zu entwickeln. Jegliche Modellierung und Simulation natürlicher Systeme ist jedoch mit beträchtlichen Unsicherheiten verknüpft. Vergleichsweise große Unsicherheiten sind mit der zukünftigen Entwicklung des sozioökonomischen Systems und der Komplexität des Klimasystems verbunden. Weiterhin haben Unsicherheiten der einzelnen Modellbausteine der Modellkette Emissionsszenarien/Gaszyklusmodelle - Globale Zirkulationsmodelle/Regionalisierung - hydrologisches Modell, die eine Kaskade der Unsicherheiten ergeben, neben Datenunsicherheiten bei der Erfassung hydrometeorologischer Meßgrößen einen erheblichen Einfluß auf die Vertrauenswürdigkeit der Simulationsergebnisse, die als ein dargestellter Wert eines Ergebnisbandes zu interpretieren sind.Der Einsatz (1) robuster hydrologischer Modelle, die insbesondere temperaturbeeinflußte Prozesse adäquat beschreiben,(2) die Verwendung langer Zeitreihen (wenigsten 30 Jahre) von Meßwerten und(3) die gleichzeitige vergleichende Betrachtung von Klimaszenarien, die auf unterschiedlichen GCMs beruhen (und wenn möglich, verschiedene Emissionsszenarien berücksichtigen),sollte aus Gründen der wissenschaftlichen Sorgfalt, aber auch der besseren Vergleichbarkeit der Ergebnisse von Regionalstudien im noch jungen Forschungsfeld der Klimafolgenforschung beachtet werden.
In den letzten Jahren wurden relativ komplexe Erosionsmodelle entwickelt, deren Teilprozesse immer mehr auf physikalisch begründeten Ansätzen beruhen. Damit verbunden ist eine höhere Anzahl aktueller Eingangsparameter, deren Bestimmung im Feld arbeits- und kostenaufwendig ist. Zudem werden die Parameter punktuell, also an bestimmten Stellen und nicht flächenhaft wie bei der Fernerkundung, erfasst. Im Rahmen dieser Arbeit wird gezeigt, wie Satellitendaten als relativ kostengünstige Ergänzung oder Alternative zur konventionellen Parametererhebung genutzt werden können. Dazu werden beispielhaft der Blattflächenindex (LAI) und der Bedeckungsgrad für das physikalisch begründete Erosionsmodell EROSION 3D abgeleitet. Im Mittelpunkt des Interesses steht dabei das Aufzeigen von existierenden Methoden, die die Basis für eine operationelle Bereitstellung solcher Größen nicht nur für Erosions- sondern allgemein für Prozessmodelle darstellen. Als Untersuchungsgebiet dient das primär landwirtschaftlich genutzte Einzugsgebiet des Mehltheuer Baches, das sich im Sächsischen Lößgefilde befindet und für das Simulationsrechnungen mit konventionell erhobenen Eingangsparametern für 29 Niederschlagsereignisse im Jahr 1999 vorliegen [MICHAEL et al. 2000]. Die Fernerkundungsdatengrundlage bilden Landsat-5-TM-Daten vom 13.03.1999, 30.04.1999 und 19.07.1999. Da die Vegetationsparameter für alle Niederschlagsereignisse vorliegen sollen, werden sie basierend auf der Entwicklung des LAI zeitlich interpoliert. Dazu erfolgt zunächst die Ableitung des LAI für alle vorhandenen Fruchtarten nach den semi-empirischen Modellen von CLEVERS [1986] und BARET & GUYOT [1991] mit aus der Literatur entnommenen Koeffizienten. Des Weiteren wird eine Methode untersucht, nach der die Koeffizienten für das Clevers-Modell aus den TM-Daten und einem vereinfachten Wachstumsmodell bestimmt werden. Der Bedeckungsgrad wird nach ROSS [1981] aus dem LAI ermittelt. Die zeitliche Interpolation des LAI wird durch die schlagbezogene Anpassung eines vereinfachten Wachstumsmodells umgesetzt, das dem hydrologischen Modell SWIM [KRYSANOVA et al. 1999] entstammt und in das durchschnittliche Tagestemperaturen eingehen. Mit den genannten Methoden bleiben abgestorbene Pflanzenteile unberücksichtigt. Im Vergleich zur konventionellen terrestrischen Parametererhebung ermöglichen sie eine differenziertere Abbildung räumlicher Variabilitäten und des zeitlichen Verlaufes der Vegetationsparameter. Die Simulationsrechnungen werden sowohl mit den direkten Bedeckungsgraden aus den TM-Daten (pixelbezogen) als auch mit den zeitlich interpolierten Bedeckungsgraden für alle Ereignisse (schlagbezogen) durchgeführt. Bei beiden Vorgehensweisen wird im Vergleich zur bisherigen Abschätzung eine Verbesserung der räumlichen Verteilung der Parameter und somit eine räumliche Umverteilung von Erosions- und Depositionsflächen erreicht. Für die im Untersuchungsgebiet vorliegende räumliche Heterogenität (z. B. Schlaggröße) bieten Landsat-TM-Daten eine ausreichend genaue räumliche Auflösung. Damit wird nachgewiesen, dass die satellitengestützte Fernerkundung im Rahmen dieser Untersuchungen sinnvoll einsetzbar ist. Für eine operationelle Bereitstellung der Parameter mit einem vertretbaren Aufwand ist es erforderlich, die Methoden weiter zu validieren und möglichst weitestgehend zu automatisieren.
Precipitation forecasting has an important place in everyday life – during the day we may have tens of small talks discussing the likelihood that it will rain this evening or weekend. Should you take an umbrella for a walk? Or should you invite your friends for a barbecue? It will certainly depend on what your weather application shows.
While for years people were guided by the precipitation forecasts issued for a particular region or city several times a day, the widespread availability of weather radars allowed us to obtain forecasts at much higher spatiotemporal resolution of minutes in time and hundreds of meters in space. Hence, radar-based precipitation nowcasting, that is, very-short-range forecasting (typically up to 1–3 h), has become an essential technique, also in various professional application contexts, e.g., early warning, sewage control, or agriculture.
There are two major components comprising a system for precipitation nowcasting: radar-based precipitation estimates, and models to extrapolate that precipitation to the imminent future. While acknowledging the fundamental importance of radar-based precipitation retrieval for precipitation nowcasts, this thesis focuses only on the model development: the establishment of open and competitive benchmark models, the investigation of the potential of deep learning, and the development of procedures for nowcast errors diagnosis and isolation that can guide model development.
The present landscape of computational models for precipitation nowcasting still struggles with the availability of open software implementations that could serve as benchmarks for measuring progress. Focusing on this gap, we have developed and extensively benchmarked a stack of models based on different optical flow algorithms for the tracking step and a set of parsimonious extrapolation procedures based on image warping and advection. We demonstrate that these models provide skillful predictions comparable with or even superior to state-of-the-art operational software. We distribute the corresponding set of models as a software library, rainymotion, which is written in the Python programming language and openly available at GitHub (https://github.com/hydrogo/rainymotion). That way, the library acts as a tool for providing fast, open, and transparent solutions that could serve as a benchmark for further model development and hypothesis testing.
One of the promising directions for model development is to challenge the potential of deep learning – a subfield of machine learning that refers to artificial neural networks with deep architectures, which may consist of many computational layers. Deep learning showed promising results in many fields of computer science, such as image and speech recognition, or natural language processing, where it started to dramatically outperform reference methods.
The high benefit of using "big data" for training is among the main reasons for that. Hence, the emerging interest in deep learning in atmospheric sciences is also caused and concerted with the increasing availability of data – both observational and model-based. The large archives of weather radar data provide a solid basis for investigation of deep learning potential in precipitation nowcasting: one year of national 5-min composites for Germany comprises around 85 billion data points.
To this aim, we present RainNet, a deep convolutional neural network for radar-based precipitation nowcasting. RainNet was trained to predict continuous precipitation intensities at a lead time of 5 min, using several years of quality-controlled weather radar composites provided by the German Weather Service (DWD). That data set covers Germany with a spatial domain of 900 km x 900 km and has a resolution of 1 km in space and 5 min in time. Independent verification experiments were carried out on 11 summer precipitation events from 2016 to 2017. In these experiments, RainNet was applied recursively in order to achieve lead times of up to 1 h. In the verification experiments, trivial Eulerian persistence and a conventional model based on optical flow served as benchmarks. The latter is available in the previously developed rainymotion library.
RainNet significantly outperformed the benchmark models at all lead times up to 60 min for the routine verification metrics mean absolute error (MAE) and critical success index (CSI) at intensity thresholds of 0.125, 1, and 5 mm/h. However, rainymotion turned out to be superior in predicting the exceedance of higher intensity thresholds (here 10 and 15 mm/h). The limited ability of RainNet to predict high rainfall intensities is an undesirable property which we attribute to a high level of spatial smoothing introduced by the model. At a lead time of 5 min, an analysis of power spectral density confirmed a significant loss of spectral power at length scales of 16 km and below.
Obviously, RainNet had learned an optimal level of smoothing to produce a nowcast at 5 min lead time. In that sense, the loss of spectral power at small scales is informative, too, as it reflects the limits of predictability as a function of spatial scale. Beyond the lead time of 5 min, however, the increasing level of smoothing is a mere artifact – an analogue to numerical diffusion – that is not a property of RainNet itself but of its recursive application. In the context of early warning, the smoothing is particularly unfavorable since pronounced features of intense precipitation tend to get lost over longer lead times. Hence, we propose several options to address this issue in prospective research on model development for precipitation nowcasting, including an adjustment of the loss function for model training, model training for longer lead times, and the prediction of threshold exceedance.
The model development together with the verification experiments for both conventional and deep learning model predictions also revealed the need to better understand the source of forecast errors. Understanding the dominant sources of error in specific situations should help in guiding further model improvement. The total error of a precipitation nowcast consists of an error in the predicted location of a precipitation feature and an error in the change of precipitation intensity over lead time. So far, verification measures did not allow to isolate the location error, making it difficult to specifically improve nowcast models with regard to location prediction.
To fill this gap, we introduced a framework to directly quantify the location error. To that end, we detect and track scale-invariant precipitation features (corners) in radar images. We then consider these observed tracks as the true reference in order to evaluate the performance (or, inversely, the error) of any model that aims to predict the future location of a precipitation feature. Hence, the location error of a forecast at any lead time ahead of the forecast time corresponds to the Euclidean distance between the observed and the predicted feature location at the corresponding lead time.
Based on this framework, we carried out a benchmarking case study using one year worth of weather radar composites of the DWD. We evaluated the performance of four extrapolation models, two of which are based on the linear extrapolation of corner motion; and the remaining two are based on the Dense Inverse Search (DIS) method: motion vectors obtained from DIS are used to predict feature locations by linear and Semi-Lagrangian extrapolation.
For all competing models, the mean location error exceeds a distance of 5 km after 60 min, and 10 km after 110 min. At least 25% of all forecasts exceed an error of 5 km after 50 min, and of 10 km after 90 min. Even for the best models in our experiment, at least 5 percent of the forecasts will have a location error of more than 10 km after 45 min. When we relate such errors to application scenarios that are typically suggested for precipitation nowcasting, e.g., early warning, it becomes obvious that location errors matter: the order of magnitude of these errors is about the same as the typical extent of a convective cell. Hence, the uncertainty of precipitation nowcasts at such length scales – just as a result of locational errors – can be substantial already at lead times of less than 1 h. Being able to quantify the location error should hence guide any model development that is targeted towards its minimization. To that aim, we also consider the high potential of using deep learning architectures specific to the assimilation of sequential (track) data.
Last but not least, the thesis demonstrates the benefits of a general movement towards open science for model development in the field of precipitation nowcasting. All the presented models and frameworks are distributed as open repositories, thus enhancing transparency and reproducibility of the methodological approach. Furthermore, they are readily available to be used for further research studies, as well as for practical applications.
Climate change fundamentally transforms glaciated high-alpine regions, with well-known cryospheric and hydrological implications, such as accelerating glacier retreat, transiently increased runoff, longer snow-free periods and more frequent and intense summer rainstorms. These changes affect the availability and transport of sediments in high alpine areas by altering the interaction and intensity of different erosion processes and catchment properties.
Gaining insight into the future alterations in suspended sediment transport by high alpine streams is crucial, given its wide-ranging implications, e.g. for flood damage potential, flood hazard in downstream river reaches, hydropower production, riverine ecology and water quality. However, the current understanding of how climate change will impact suspended sediment dynamics in these high alpine regions is limited. For one, this is due to the scarcity of measurement time series that are long enough to e.g. infer trends. On the other hand, it is difficult – if not impossible – to develop process-based models, due to the complexity and multitude of processes involved in high alpine sediment dynamics. Therefore, knowledge has so far been confined to conceptual models (which do not facilitate deriving concrete timings or magnitudes for individual catchments) or qualitative estimates (‘higher export in warmer years’) that may not be able to capture decreases in sediment export. Recently, machine-learning approaches have gained in popularity for modeling sediment dynamics, since their black box nature tailors them to the problem at hand, i.e. relatively well-understood input and output data, linked by very complex processes.
Therefore, the overarching aim of this thesis is to estimate sediment export from the high alpine Ötztal valley in Tyrol, Austria, over decadal timescales in the past and future – i.e. timescales relevant to anthropogenic climate change. This is achieved by informing, extending, evaluating and applying a quantile regression forest (QRF) approach, i.e. a nonparametric, multivariate machine-learning technique based on random forest.
The first study included in this thesis aimed to understand present sediment dynamics, i.e. in the period with available measurements (up to 15 years). To inform the modeling setup for the two subsequent studies, this study identified the most important predictors, areas within the catchments and time periods. To that end, water and sediment yields from three nested gauges in the upper Ötztal, Vent, Sölden and Tumpen (98 to almost 800 km² catchment area, 930 to 3772 m a.s.l.) were analyzed for their distribution in space, their seasonality and spatial differences therein, and the relative importance of short-term events. The findings suggest that the areas situated above 2500 m a.s.l., containing glacier tongues and recently deglaciated areas, play a pivotal role in sediment generation across all sub-catchments. In contrast, precipitation events were relatively unimportant (on average, 21 % of annual sediment yield was associated to precipitation events). Thus, the second and third study focused on the Vent catchment and its sub-catchment above gauge Vernagt (11.4 and 98 km², 1891 to 3772 m a.s.l.), due to their higher share of areas above 2500 m. Additionally, they included discharge, precipitation and air temperature (as well as their antecedent conditions) as predictors.
The second study aimed to estimate sediment export since the 1960s/70s at gauges Vent and Vernagt. This was facilitated by the availability of long records of the predictors, discharge, precipitation and air temperature, and shorter records (four and 15 years) of turbidity-derived sediment concentrations at the two gauges. The third study aimed to estimate future sediment export until 2100, by applying the QRF models developed in the second study to pre-existing precipitation and temperature projections (EURO-CORDEX) and discharge projections (physically-based hydroclimatological and snow model AMUNDSEN) for the three representative concentration pathways RCP2.6, RCP4.5 and RCP8.5.
The combined results of the second and third study show overall increasing sediment export in the past and decreasing export in the future. This suggests that peak sediment is underway or has already passed – unless precipitation changes unfold differently than represented in the projections or changes in the catchment erodibility prevail and override these trends. Despite the overall future decrease, very high sediment export is possible in response to precipitation events. This two-fold development has important implications for managing sediment, flood hazard and riverine ecology.
This thesis shows that QRF can be a very useful tool to model sediment export in high-alpine areas. Several validations in the second study showed good performance of QRF and its superiority to traditional sediment rating curves – especially in periods that contained high sediment export events, which points to its ability to deal with threshold effects. A technical limitation of QRF is the inability to extrapolate beyond the range of values represented in the training data. We assessed the number and severity of such out-of-observation-range (OOOR) days in both studies, which showed that there were few OOOR days in the second study and that uncertainties associated with OOOR days were small before 2070 in the third study. As the pre-processed data and model code have been made publically available, future studies can easily test further approaches or apply QRF to further catchments.
Flood polders are part of the flood risk management strategy for many lowland rivers. They are used for the controlled storage of flood water so as to lower peak discharges of large floods. Consequently, the flood hazard in adjacent and downstream river reaches is decreased in the case of flood polder utilisation. Flood polders are usually dry storage reservoirs that are typically characterised by agricultural activities or other land use of low economic and ecological vulnerability. The objective of this thesis is to analyse hydraulic, environmental and economic impacts of the utilisation of flood polders in order to draw conclusions for their management. For this purpose, hydrodynamic and water quality modelling as well as an economic vulnerability assessment are employed in two study areas on the Middle Elbe River in Germany. One study area is an existing flood polder system on the tributary Havel, which was put into operation during the Elbe flood in summer 2002. The second study area is a planned flood polder, which is currently in the early planning stages. Furthermore, numerical models of different spatial dimensionality, ranging from zero- to two-dimensional, are applied in order to evaluate their suitability for hydrodynamic and water quality simulations of flood polders in regard to performance and modelling effort. The thesis concludes with overall recommendations on the management of flood polders, including operational schemes and land use. In view of future changes in flood frequency and further increasing values of private and public assets in flood-prone areas, flood polders may be effective and flexible technical flood protection measures that contribute to a successful flood risk management for large lowland rivers.
Analysis and modelling of nutrient transport and transformation processes on the catchment scale
(2007)
Analysis and modelling of nutrient transport and transformation processes on the catchment scale
(2007)
River reaches protected by dikes exhibit high damage potential due to strong value accumulation in the hinterland areas. While providing an efficient protection against low magnitude flood events, dikes may fail under the load of extreme water levels and long flood durations. Hazard and risk assessments for river reaches protected by dikes have not adequately considered the fluvial inundation processes up to now. Particularly, the processes of dike failures and their influence on the hinterland inundation and flood wave propagation lack comprehensive consideration. This study focuses on the development and application of a new modelling system which allows a comprehensive flood hazard assessment along diked river reaches under consideration of dike failures. The proposed Inundation Hazard Assessment Model (IHAM) represents a hybrid probabilistic-deterministic model. It comprises three models interactively coupled at runtime. These are: (1) 1D unsteady hydrodynamic model of river channel and floodplain flow between dikes, (2) probabilistic dike breach model which determines possible dike breach locations, breach widths and breach outflow discharges, and (3) 2D raster-based diffusion wave storage cell model of the hinterland areas behind the dikes. Due to the unsteady nature of the 1D and 2D coupled models, the dependence between hydraulic load at various locations along the reach is explicitly considered. The probabilistic dike breach model describes dike failures due to three failure mechanisms: overtopping, piping and slope instability caused by the seepage flow through the dike core (micro-instability). The 2D storage cell model driven by the breach outflow boundary conditions computes an extended spectrum of flood intensity indicators such as water depth, flow velocity, impulse, inundation duration and rate of water rise. IHAM is embedded in a Monte Carlo simulation in order to account for the natural variability of the flood generation processes reflected in the form of input hydrographs and for the randomness of dike failures given by breach locations, times and widths. The model was developed and tested on a ca. 91 km heavily diked river reach on the German part of the Elbe River between gauges Torgau and Vockerode. The reach is characterised by low slope and fairly flat extended hinterland areas. The scenario calculations for the developed synthetic input hydrographs for the main river and tributary were carried out for floods with return periods of T = 100, 200, 500, 1000 a. Based on the modelling results, probabilistic dike hazard maps could be generated that indicate the failure probability of each discretised dike section for every scenario magnitude. In the disaggregated display mode, the dike hazard maps indicate the failure probabilities for each considered breach mechanism. Besides the binary inundation patterns that indicate the probability of raster cells being inundated, IHAM generates probabilistic flood hazard maps. These maps display spatial patterns of the considered flood intensity indicators and their associated return periods. Finally, scenarios of polder deployment for the extreme floods with T = 200, 500, 1000 were simulated with IHAM. The developed IHAM simulation system represents a new scientific tool for studying fluvial inundation dynamics under extreme conditions incorporating effects of technical flood protection measures. With its major outputs in form of novel probabilistic inundation and dike hazard maps, the IHAM system has a high practical value for decision support in flood management.
On a planetary scale human populations need to adapt to both socio-economic and environmental problems amidst rapid global change. This holds true for coupled human-environment (socio-ecological) systems in rural and urban settings alike. Two examples are drylands and urban coasts. Such socio-ecological systems have a global distribution. Therefore, advancing the knowledge base for identifying socio-ecological adaptation needs with local vulnerability assessments alone is infeasible: The systems cover vast areas, while funding, time, and human resources for local assessments are limited. They are lacking in low an middle-income countries (LICs and MICs) in particular.
But places in a specific socio-ecological system are not only unique and complex – they also exhibit similarities. A global patchwork of local rural drylands vulnerability assessments of human populations to socio-ecological and environmental problems has already been reduced to a limited number of problem structures, which typically cause vulnerability. However, the question arises whether this is also possible in urban socio-ecological systems. The question also arises whether these typologies provide added value in research beyond global change. Finally, the methodology employed for drylands needs refining and standardizing to increase its uptake in the scientific community. In this dissertation, I set out to fill these three gaps in research.
The geographical focus in my dissertation is on LICs and MICs, which generally have lower capacities to adapt, and greater adaptation needs, regarding rapid global change. Using a spatially explicit indicator-based methodology, I combine geospatial and clustering methods to identify typical configurations of key factors in case studies causing vulnerability to human populations in two specific socio-ecological systems. Then I use statistical and analytical methods to interpret and appraise both the typical configurations and the global typologies they constitute.
First, I improve the indicator-based methodology and then reanalyze typical global problem structures of socio-ecological drylands vulnerability with seven indicator datasets. The reanalysis confirms the key tenets and produces a more realistic and nuanced typology of eight spatially explicit problem structures, or vulnerability profiles: Two new profiles with typically high natural resource endowment emerge, in which overpopulation has led to medium or high soil erosion. Second, I determine whether the new drylands typology and its socio-ecological vulnerability concept advance a thematically linked scientific debate in human security studies: what drives violent conflict in drylands? The typology is a much better predictor for conflict distribution and incidence in drylands than regression models typically used in peace research. Third, I analyze global problem structures typically causing vulnerability in an urban socio-ecological system - the rapidly urbanizing coastal fringe (RUCF) – with eleven indicator datasets. The RUCF also shows a robust typology, and its seven profiles show huge asymmetries in vulnerability and adaptive capacity. The fastest population increase, lowest income, most ineffective governments, most prevalent poverty, and lowest adaptive capacity are all typically stacked in two profiles in LICs. This shows that beyond local case studies tropical cyclones and/or coastal flooding are neither stalling rapid population growth, nor urban expansion, in the RUCF. I propose entry points for scaling up successful vulnerability reduction strategies in coastal cities within the same vulnerability profile.
This dissertation shows that patchworks of local vulnerability assessments can be generalized to structure global socio-ecological vulnerabilities in both rural and urban socio-ecological systems according to typical problems. In terms of climate-related extreme events in the RUCF, conflicting problem structures and means to deal with them are threatening to widen the development gap between LICs and high-income countries unless successful vulnerability reduction measures are comprehensively scaled up. The explanatory power for human security in drylands warrants further applications of the methodology beyond global environmental change research in the future. Thus, analyzing spatially explicit global typologies of socio-ecological vulnerability is a useful complement to local assessments: The typologies provide entry points for where to consider which generic measures to reduce typical problem structures – including the countless places without local assessments. This can save limited time and financial resources for adaptation under rapid global change.
Largescale patterns of global land use change are very frequently accompanied by natural habitat loss. To assess the consequences of habitat loss for the remaining natural and semi-natural biotopes, inclusion of cumulative effects at the landscape level is required. The interdisciplinary concept of vulnerability constitutes an appropriate assessment framework at the landscape level, though with few examples of its application for ecological assessments. A comprehensive biotope vulnerability analysis allows identification of areas most affected by landscape change and at the same time with the lowest chances of regeneration.
To this end, a series of ecological indicators were reviewed and developed. They measured spatial attributes of individual biotopes as well as some ecological and conservation characteristics of the respective resident species community. The final vulnerability index combined seven largely independent indicators, which covered exposure, sensitivity and adaptive capacity of biotopes to landscape changes. Results for biotope vulnerability were provided at the regional level. This seems to be an appropriate extent with relevance for spatial planning and designing the distribution of nature reserves.
Using the vulnerability scores calculated for the German federal state of Brandenburg, hot spots and clusters within and across the distinguished types of biotopes were analysed. Biotope types with high dependence on water availability, as well as biotopes of the open landscape containing woody plants (e.g., orchard meadows) are particularly vulnerable to landscape changes. In contrast, the majority of forest biotopes appear to be less vulnerable. Despite the appeal of such generalised statements for some biotope types, the distribution of values suggests that conservation measures for the majority of biotopes should be designed specifically for individual sites. Taken together, size, shape and spatial context of individual biotopes often had a dominant influence on the vulnerability score.
The implementation of biotope vulnerability analysis at the regional level indicated that large biotope datasets can be evaluated with high level of detail using geoinformatics. Drawing on previous work in landscape spatial analysis, the reproducible approach relies on transparent calculations of quantitative and qualitative indicators. At the same time, it provides a synoptic overview and information on the individual biotopes. It is expected to be most useful for nature conservation in combination with an understanding of population, species, and community attributes known for specific sites. The biotope vulnerability analysis facilitates a foresighted assessment of different land uses, aiding in identifying options to slow habitat loss to sustainable levels. It can also be incorporated into planning of restoration measures, guiding efforts to remedy ecological damage. Restoration of any specific site could yield synergies with the conservation objectives of other sites, through enhancing the habitat network or buffering against future landscape change.
Biotope vulnerability analysis could be developed in line with other important ecological concepts, such as resilience and adaptability, further extending the broad thematic scope of the vulnerability concept. Vulnerability can increasingly serve as a common framework for the interdisciplinary research necessary to solve major societal challenges.
Ausprägungen räumlicher Identität in ehemaligen sudetendeutschen Gebieten der Tschechischen Republik
(2014)
Das tschechische Grenzgebiet ist eine der Regionen in Europa, die in der Folge des Zweiten Weltkrieges am gravierendsten von Umbrüchen in der zuvor bestehenden Bevölkerungsstruktur betroffen waren. Der erzwungenen Aussiedlung eines Großteils der ansässigen Bevölkerung folgten die Neubesiedlung durch verschiedenste Zuwanderergruppen sowie teilweise langanhaltende Fluktuationen der Einwohnerschaft. Die Stabilisierung der Bevölkerung stand sodann unter dem Zeichen der sozialistischen Gesellschafts- und Wirtschaftsordnung, die die Lebensweise und Raumwahrnehmung der neuen Einwohner nachhaltig prägte. Die Grenzöffnung von 1989, die politische Transformation sowie die Integration der Tschechischen Republik in die Europäische Union brachten neue demographische und sozioökonomische Entwicklungen mit sich. Sie schufen aber auch die Bedingungen dafür, sich neu und offen auch mit der spezifischen Geschichte des ehemaligen Sudetenlandes sowie mit dem Zustand der gegenwärtigen Gesellschaft in diesem Gebiet auseinanderzusetzen.
Im Rahmen der vorliegenden Arbeit wird anhand zweier Beispielregionen untersucht, welche Raumvorstellungen und Raumbindungen bei der heute in den ehemaligen sudetendeutschen Gebieten ansässigen Bevölkerung vorhanden sind und welche Einflüsse die unterschiedlichen raumstrukturellen Bedingungen darauf ausüben. Besonderes Augenmerk wird auf die soziale Komponente der Ausprägung räumlicher Identität gelegt, das heißt auf die Rolle von Bedeutungszuweisungen gegenüber Raumelementen im Rahmen sozialer Kommunikation und Interaktion. Dies erscheint von besonderer Relevanz in einem Raum, der sich durch eine gewisse Heterogenität seiner Einwohnerschaft hinsichtlich ihres ethnischen, kulturellen beziehungsweise biographischen Hintergrundes auszeichnet. Schließlich wird ermittelt, welche Impulse unter Umständen von einer ausgeprägten räumlichen Identität für die Entwicklung des Raumes ausgehen.
Die automatisierte Objektidentifikation stellt ein modernes Werkzeug in den Geoinformationswissenschaften dar (BLASCHKE et al., 2012). Um bei thematischen Kartierungen untereinander vergleichbare Ergebnisse zu erzielen, sollen aus Sicht der Geoinformatik Mittel für die Objektidentifikation eingesetzt werden. Anstelle von Feldarbeit werden deshalb in der vorliegenden Arbeit multispektrale Fernerkundungsdaten als Primärdaten verwendet. Konkrete natürliche Objekte werden GIS-gestützt und automatisiert über große Flächen und Objektdichten aus Primärdaten identifiziert und charakterisiert. Im Rahmen der vorliegenden Arbeit wird eine automatisierte Prozesskette zur Objektidentifikation konzipiert. Es werden neue Ansätze und Konzepte der objektbasierten Identifikation von natürlichen isolierten terrestrischen Oberflächenformen entwickelt und implementiert. Die Prozesskette basiert auf einem Konzept, das auf einem generischen Ansatz für automatisierte Objektidentifikation aufgebaut ist. Die Prozesskette kann anhand charakteristischer quantitativer Parameter angepasst und so umgesetzt werden, womit das Konzept der Objektidentifikation modular und skalierbar wird. Die modulbasierte Architektur ermöglicht den Einsatz sowohl einzelner Module als auch ihrer Kombination und möglicher Erweiterungen. Die eingesetzte Methodik der Objektidentifikation und die daran anschließende Charakteristik der (geo)morphometrischen und morphologischen Parameter wird durch statistische Verfahren gestützt. Diese ermöglichen die Vergleichbarkeit von Objektparametern aus unterschiedlichen Stichproben. Mit Hilfe der Regressionsund Varianzanalyse werden Verhältnisse zwischen Objektparametern untersucht. Es werden funktionale Abhängigkeiten der Parameter analysiert, um die Objekte qualitativ zu beschreiben. Damit ist es möglich, automatisiert berechnete Maße und Indizes der Objekte als quantitative Daten und Informationen zu erfassen und unterschiedliche Stichproben anzuwenden. Im Rahmen dieser Arbeit bilden Thermokarstseen die Grundlage für die Entwicklungen und als Beispiel sowie Datengrundlage für den Aufbau des Algorithmus und die Analyse. Die Geovisualisierung der multivariaten natürlichen Objekte wird für die Entwicklung eines besseren Verständnisses der räumlichen Relationen der Objekte eingesetzt. Kern der Geovisualisierung ist das Verknüpfen von Visualisierungsmethoden mit kartenähnlichen Darstellungen.
Die Untersuchung widmet sich der aktuellen Bedeutung von Ethnizität im ländlichen Raum der rumänischen Dobrudscha unter dem Einfluss der politischen und ökonomischen Dimension von Globalisierung. Im Mittelpunkt der Betrachtung von Ethnizität stehen die Aspekte von Inklusion und Exklusion sowie Selbst- und Fremdbeschreibung, die dem sozialen Wandel unterliegen. Mit einem Überblick über die Geschichte der räumlich, wirtschaftlich und sozial peripheren Untersuchungsregion Dobrudscha und der ausgewählten Minderheitengruppen wird die Entwicklung der ethnischen Zusammensetzung der Bevölkerung in der Region dargestellt. Als Fallbeispiele werden sechs Minderheitengruppen gewählt: Aromunen, Roma, russische Lipowaner, Tataren, Türken und Ukrainer. Zentrales Element der Studie bilden qualitative Interviews mit professionellen Beobachtern und Akteuren einerseits, die selbst Einfluss auf die soziale Bedeutung von Ethnizität nehmen, und andererseits mit Einwohnern in 15 ausgewählten Untersuchungsorten in der Dobrudscha. Die erhobenen Daten werden mit Blick auf die soziale Rolle von Ethnizität anhand von drei Faktorengruppen ausgewertet: Globalisierung der Ökonomie, Minderheiten- und Kulturpolitik sowie internationale Beziehungen. Auf dieser Grundlage wird die regionale und lokale Bedeutung ethnischer Kategorisierungen analysiert, um die Wahrnehmung und Bewertung ethnischer Zuordnungen im örtlichen Lebensumfeld zu erfassen.
Biogeochemical analyses of lacustrine environments are well-established methods that allow exploring and understanding complex systems in the lake ecosystem. However, most were conducted in temperate lakes controlled by entirely different physical conditions than in tropical climates. The most important difference between the temperate and tropical lakes is lacking seasonal temperature fluctuations in the latter, which leads to a stable temperature gradient in the water column. Thus, the water column in tropical latitudes generally is void of perturbations that can be seen in their temperate counterparts. Permanent stratification in the water column provides optimal conditions for intact sedimentation. The geochemical processes in the water column and the weathering process in the distinct lithology in the catchment leads to the different biogeochemical characteristic in the sediment. Conducting a biogeochemical study in this lake sediment, especially in the Sediment Water Interface (SWI) helps reveal the sedimentation and diagenetic process records influenced by the internal or external loading. Lake Sentani, the study area, is one of the thousands of lakes in Indonesia and located in the Papua province. This tropical lake has a unique feature, as it consists of four interconnected sub-basins with different water depths. More importantly, its catchment is comprised of various different lithologies. Hence, its lithological characteristics are highly diverse, and range from mafic and ultramafic rocks to clastic sediment and carbonates. Each sub-basin receives a distinct sediment input. Equally important, besides the natural loading, Lake Sentani is also influenced by anthropogenic input. Previous studies have elaborated that there is an increase in population growth rate around the lake which has direct consequences on eutrophication. Considering these factors, the government of The Republic of Indonesia put Lake Sentani on the list of national priority lakes for restoration. This thesis aims to develop a fundamental understanding of Lake Sentani's sedimentary geochemistry and geomicrobiology with a special focus on the effects of different lithologies and anthropogenic pressures in the catchment area. We conducted geochemical and geomicrobiology research on Lake Sentani to meet this objective. We investigated geochemical characteristics in the water column, porewater, and sediment core of the four sub-basins. Additional to direct investigations of the lake itself, we also studied the sediments in the tributary rivers, of which some are ephemeral, as well as the river mouths, as connections between riverine and the lacustrine habitat. The thesis is composed of three main publications about Lake Sentani and supported by several publications that focus on other tropical lakes in Indonesia. The first main publication investigates the geochemical characterization of the water column, porewater, and surface sediment (upper 40-50 cm) from the center of the four sub-basins. It reveals that besides catchment lithology, the water column heavily influences the geochemical characteristics in the lake sediments and their porewater. The findings indicate that water column stratification has a strong influence on overall chemistry. The four sub-basins are very different with regard to their water column chemistry. Based on the physicochemical profiles, especially dissolved oxygen, one sub-basin is oxygenated, one intermediate i.e. just reaches oxygen depletion at the sediment-water interface, and two sub-basins are fully meromictic. However, all four sub-basins share the same surface water chemistry. The structure of the water column creates differences on the patterns of anions and cations in the porewater. Likewise, the distinct differences in geochemical composition between the sub-basins show that the lithology in the catchment affects the geochemical characteristic in the sediment. Overall, water column stratification and particularly bottom water oxygenation strongly influence the overall elemental composition of the sediment and porewater composition. The second publication reveals differences in surface sediment composition between habitats, influenced by lithological variations in the catchment area. The macro-element distribution shows that the geochemical characteristics between habitats are different. Furthermore, the geochemical composition also indicates a distinct distribution between the sub-basins. The geochemical composition of the eastern sub-basin suggests that lithogenic elements are more dominant than authigenic elements. This is also supported by sulfide speciation, particle distribution, and smear slide data. The third publication is a geomicrobiological study of the surface sediment. We compare the geochemical composition of the surface sediment and its microbiological composition and compare the different signals. Next Generation Sequencing (NGS) of the 16S rRNA gene was applied to determine the microbial community composition of the surface sediment from a great number of locations. We use a large number of sampling sites in all four sub-basins as well as in the rivers and river mouths to illustrate the links between the river, the river mouth, and the lake. Rigorous assessment of microbial communities across the diverse Lake Sentani habitats allowed us to study some of these links and report novel findings on microbial patterns in such ecosystems. The main result of the Principal Coordinates Analysis (PCoA) based on microbial community composition highlighted some commonalities but also differences between the microbial community analysis and the geochemical data. The microbial community in rivers, river mouths and sub-basins is strongly influenced by anthropogenic input from the catchment area. Generally, Bacteroidetes and Firmicutes could be an indicator for river sediments. The microbial community in the river is directly influenced by anthropogenic pressure and is markedly different from the lake sediment. Meanwhile, the microbial community in the lake sediment reflects the anoxic environment, which is prevalent across the lake in all sediments below a few mm burial depth. The lake sediments harbour abundant sulfate reducers and methanogens. The microbial communities in sediments from river mouths are influenced by both rivers and lake ecosystems. This study provides valuable information to understand the basic processes that control biogeochemical cycling in Lake Sentani. Our findings are critical for lake managers to accurately assess the uncertainties of the changing environmental conditions related to the anthropogenic pressure in the catchment area. Lake Sentani is a unique study site directly influenced by the different geology across the watershed and morphometry of the four studied basins. As a result of these factors, there are distinct geochemical differences between the habitats (river, river mouth, lake) and the four sub-basins. In addition to geochemistry, microbial community composition also shows differences between habitats, although there are no obvious differences between the four sub-basins. However, unlike sediment geochemistry, microbial community composition is impacted by human activities. Therefore, this thesis will provide crucial baseline data for future lake management.
Calibration of the global hydrological model WGHM with water mass variations from GRACE gravity data
(2010)
Since the start-up of the GRACE (Gravity Recovery And Climate Experiment) mission in 2002 time dependent global maps of the Earth's gravity field are available to study geophysical and climatologically-driven mass redistributions on the Earth's surface. In particular, GRACE observations of total water storage changes (TWSV) provide a comprehensive data set for analysing the water cycle on large scales. Therefore they are invaluable for validation and calibration of large-scale hydrological models as the WaterGAP Global Hydrology Model (WGHM) which simulates the continental water cycle including its most important components, such as soil, snow, canopy, surface- and groundwater. Hitherto, WGHM exhibits significant differences to GRACE, especially for the seasonal amplitude of TWSV. The need for a validation of hydrological models is further highlighted by large differences between several global models, e.g. WGHM, the Global Land Data Assimilation System (GLDAS) and the Land Dynamics model (LaD). For this purpose, GRACE links geodetic and hydrological research aspects. This link demands the development of adequate data integration methods on both sides, forming the main objectives of this work. They include the derivation of accurate GRACE-based water storage changes, the development of strategies to integrate GRACE data into a global hydrological model as well as a calibration method, followed by the re-calibration of WGHM in order to analyse process and model responses. To achieve these aims, GRACE filter tools for the derivation of regionally averaged TWSV were evaluated for specific river basins. Here, a decorrelation filter using GRACE orbits for its design is most efficient among the tested methods. Consistency in data and equal spatial resolution between observed and simulated TWSV were realised by the inclusion of all most important hydrological processes and an equal filtering of both data sets. Appropriate calibration parameters were derived by a WGHM sensitivity analysis against TWSV. Finally, a multi-objective calibration framework was developed to constrain model predictions by both river discharge and GRACE TWSV, realised with a respective evolutionary method, the ε-Non-dominated-Sorting-Genetic-Algorithm-II (ε-NSGAII). Model calibration was done for the 28 largest river basins worldwide and for most of them improved simulation results were achieved with regard to both objectives. From the multi-objective approach more reliable and consistent simulations of TWSV within the continental water cycle were gained and possible model structure errors or mis-modelled processes for specific river basins detected. For tropical regions as such, the seasonal amplitude of water mass variations has increased. The findings lead to an improved understanding of hydrological processes and their representation in the global model. Finally, the robustness of the results is analysed with respect to GRACE and runoff measurement errors. As a main conclusion obtained from the results, not only soil water and snow storage but also groundwater and surface water storage have to be included in the comparison of the modelled and GRACE-derived total water budged data. Regarding model calibration, the regional varying distribution of parameter sensitivity suggests to tune only parameter of important processes within each region. Furthermore, observations of single storage components beside runoff are necessary to improve signal amplitudes and timing of simulated TWSV as well as to evaluate them with higher accuracy. The results of this work highlight the valuable nature of GRACE data when merged into large-scale hydrological modelling and depict methods to improve large-scale hydrological models.
The work is designed to investigate the impacts and sensitivity of climate change on water resources, droughts and hydropower production in Malawi, the South-Eastern region which is highly vulnerable to climate change. It is observed that rainfall is decreasing and temperature is increasing which calls for the understanding of what these changes may impact the water resources, drought occurrences and hydropower generation in the region. The study is conducted in the Greater Lake Malawi Basin (Lake Malawi and Shire River Basins) and is divided into three projects. The first study is assessing the variability and trends of both meteorological and hydrological droughts from 1970-2013 in Lake Malawi and Shire River basins using the standardized precipitation index (SPI) and standardized precipitation and evaporation Index (SPEI) for meteorological droughts and the lake level change index (LLCI) for hydrological droughts. And later the relationship of the meteorological and hydrological droughts is established.
While the second study extends the drought analysis into the future by examining the potential future meteorological water balance and associated drought characteristics such as the drought intensity (DI), drought months (DM), and drought events (DE) in the Greater Lake Malawi Basin. The sensitivity of drought to changes of rainfall and temperature is also assessed using the scenario-neutral approach. The climate change projections from 20 Coordinated Regional Climate Downscaling Experiment (CORDEX) models for Africa based on two scenarios (RCP4.5 and RCP8.5) for the periods 2021–2050 and 2071–2100 are used. The study also investigates the effect of bias-correction (i.e., empirical quantile mapping) on the ability of the climate model ensemble in reproducing observed drought characteristics as compared to raw climate projections.
The sensitivity of key hydrologic variables and hydropower generation to climate change in Lake Malawi and Shire River basins is assessed in third study. The study adapts the mesoscale Hydrological Model (mHM) which is applied separately in the Upper Lake Malawi and Shire River basins. A particular Lake Malawi model, which focuses on reservoir routing and lake water balance, has been developed and is interlinked between the two basins. Similar to second study, the scenario-neutral approach is also applied to determine the sensitivity of climate change on water resources more particularly Lake Malawi level and Shire River flow which later helps to estimate the hydropower production susceptibility.
Results suggest that meteorological droughts are increasing due to a decrease in precipitation which is exacerbated by an increase in temperature (potential evapotranspiration). The hydrological system of Lake Malawi seems to have a >24-month memory towards meteorological conditions since the 36-months SPEI can predict hydrological droughts ten-months in advance. The study has found the critical lake level that would trigger hydrological drought to be 474.1 m.a.s.l.
Despite the differences in the internal structures and uncertainties that exist among the climate models, they all agree on an increase of meteorological droughts in the future in terms of higher DI and longer events (DM). DI is projected to increase between +25% and +50% during 2021-2050 and between +131% and +388% during 2071-2100. This translates into +3 to +5, and +7 to +8 more drought months per year during both periods, respectively. With longer lasting drought events, DE is decreasing. Projected droughts based on RCP8.5 are 1.7 times more severe than droughts based on RCP4.5.
It is also found that an annual temperature increase of 1°C decreases mean lake level and outflow by 0.3 m and 17%, respectively, signifying the importance of intensified evaporation for Lake Malawi’s water budget. Meanwhile, a +5% (-5%) deviation in annual rainfall changes mean lake level by +0.7 m (-0.6 m). The combined effects of temperature increase and rainfall decrease result in significantly lower flows on Shire River. The hydrological river regime may change from perennial to seasonal with the combination of annual temperature increase and precipitation decrease beyond 1.5°C (3.5°C) and -20% (-15%). The study further projects a reduction in annual hydropower production between 1% (RCP8.5) and 2.5% (RCP4.5) during 2021–2050 and between 5% (RCP4.5) and 24% (RCP8.5) during 2071–2100.
The findings are later linked to global policies more particularly the United Nations Framework Convention on Climate Change (UNFCCC)’s Paris Agreement and the United Nations (UN)’s Sustainable Development Goals (SDGs), and how the failure to adhere the restriction of temperature increase below the global limit of 1.5°C will affect drought and the water resources in Malawi consequently impact the hydropower production. As a result, the achievement of most of the SDGs will be compromised.
The results show that it is of great importance that a further development of hydro energy on the Shire River should take into account the effects of climate change. The information generation is important for decision making more especially supporting the climate action required to fight against climate change. The frequency of extreme climate events due to climate change has reached the climate emergency as saving lives and livelihoods require urgent action.
Soil is today considered a non-renewable resource on societal time scale, as the rate of soil loss is higher than the one of soil formation.
Soil formation is complex, can take several thousands of years and is influenced by a variety of factors, one of them is time. Oftentimes, there is the assumption of constant and progressive conditions for soil and/or profile development (i.e., steady-state). In reality, for most of the soils, their (co-)evolution leads to a complex and irregular soil development in time and space characterised by “progressive” and “regressive” phases.
Lateral transport of soil material (i.e., soil erosion) is one of the principal processes shaping the land surface and soil profile during “regressive” phases and one of the major environmental problems the world faces.
Anthropogenic activities like agriculture can exacerbate soil erosion. Thus, it is of vital importance to distinguish short-term soil redistribution rates (i.e., within decades) influenced by human activities differ from long-term natural rates. To do so, soil erosion (and denudation) rates can be determined by using a set of isotope methods that cover different time scales at landscape level.
With the aim to unravel the co-evolution of weathering, soil profile development and lateral redistribution on a landscape level, we used Pluthonium-239+240 (239+240Pu), Beryllium-10 (10Be, in situ and meteoric) and Radiocarbon (14C) to calculate short- and long-term erosion rates in two settings, i.e., a natural and an anthropogenic environment in the hummocky ground moraine landscape of the Uckermark, North-eastern Germany. The main research questions were:
1. How do long-term and short-term rates of soil redistributing processes differ?
2. Are rates calculated from in situ 10Be comparable to those of using meteoric 10Be?
3. How do soil redistribution rates (short- and long-term) in an agricultural and in a natural landscape compare to each other?
4. Are the soil patterns observed in northern Germany purely a result of past events (natural and/or anthropogenic) or are they imbedded in ongoing processes?
Erosion and deposition are reflected in a catena of soil profiles with no or almost no erosion on flat positions (hilltop), strong erosion on the mid-slope and accumulation of soil material at the toeslope position. These three characteristic process domains were chosen within the CarboZALF-D experimental site, characterised by intense anthropogenic activities. Likewise, a hydrosequence in an ancient forest was chosen for this study and being regarded as a catena strongly influenced by natural soil transport.
The following main results were obtained using the above-mentioned range of isotope methods available to measure soil redistribution rates depending on the time scale needed (e.g., 239+240Pu, 10Be, 14C):
1. Short-term erosion rates are one order of magnitude higher than long-term rates in agricultural settings.
2. Both meteoric and in situ 10Be are suitable soil tracers to measure the long-term soil redistribution rates giving similar results in an anthropogenic environment for different landscape positions (e.g., hilltop, mid-slope, toeslope)
3. Short-term rates were extremely low/negligible in a natural landscape and very high in an agricultural landscape – -0.01 t ha-1 yr-1 (average value) and -25 t ha-1 yr-1 respectively. On the contrary, long-term rates in the forested landscape are comparable to those calculated in the agricultural area investigated with average values of -1.00 t ha-1 yr-1 and -0.79 t ha-1 yr-1.
4. Soil patterns observed in the forest might be due to human impact and activities started after the first settlements in the region, earlier than previously postulated, between 4.5 and 6.8 kyr BP, and not a result of recent soil erosion.
5. Furthermore, long-term soil redistribution rates are similar independently from the settings, meaning past natural soil mass redistribution processes still overshadow the present anthropogenic erosion processes.
Overall, this study could make important contributions to the deciphering of the co-evolution of weathering, soil profile development and lateral redistribution in North-eastern Germany. The multi-methodological approach used can be challenged by the application in a wider range of landscapes and geographic regions.
The sea level rise induced intensification of coastal floods is a serious threat to many regions in proximity to the ocean. Although severe flood events are rare they can entail enormous damage costs, especially when built-up areas are inundated. Fortunately, the mean sea level advances slowly and there is enough time for society to adapt to the changing environment. Most commonly, this is achieved by the construction or reinforcement of flood defence measures such as dykes or sea walls but also land use and disaster management are widely discussed options. Overall, albeit the projection of sea level rise impacts and the elaboration of adequate response strategies is amongst the most prominent topics in climate impact research, global damage estimates are vague and mostly rely on the same assessment models. The thesis at hand contributes to this issue by presenting a distinctive approach which facilitates large scale assessments as well as the comparability of results across regions. Moreover, we aim to improve the general understanding of the interplay between mean sea level rise, adaptation, and coastal flood damage.
Our undertaking is based on two basic building blocks. Firstly, we make use of macroscopic flood-damage functions, i.e. damage functions that provide the total monetary damage within a delineated region (e.g. a city) caused by a flood of certain magnitude. After introducing a systematic methodology for the automatised derivation of such functions, we apply it to a total of 140 European cities and obtain a large set of damage curves utilisable for individual as well as comparative damage assessments. By scrutinising the resulting curves, we are further able to characterise the slope of the damage functions by means of a functional model. The proposed function has in general a sigmoidal shape but exhibits a power law increase for the relevant range of flood levels and we detect an average exponent of 3.4 for the considered cities. This finding represents an essential input for subsequent elaborations on the general interrelations of involved quantities.
The second basic element of this work is extreme value theory which is employed to characterise the occurrence of flood events and in conjunction with a damage function provides the probability distribution of the annual damage in the area under study. The resulting approach is highly flexible as it assumes non-stationarity in all relevant parameters and can be easily applied to arbitrary regions, sea level, and adaptation scenarios. For instance, we find a doubling of expected flood damage in the city of Copenhagen for a rise in mean sea levels of only 11 cm. By following more general considerations, we succeed in deducing surprisingly simple functional expressions to describe the damage behaviour in a given region for varying mean sea levels, changing storm intensities, and supposed protection levels. We are thus able to project future flood damage by means of a reduced set of parameters, namely the aforementioned damage function exponent and the extreme value parameters. Similar examinations are carried out to quantify the aleatory uncertainty involved in these projections. In this regard, a decrease of (relative) uncertainty with rising mean sea levels is detected. Beyond that, we demonstrate how potential adaptation measures can be assessed in terms of a Cost-Benefit Analysis. This is exemplified by the Danish case study of Kalundborg, where amortisation times for a planned investment are estimated for several sea level scenarios and discount rates.
Complete protection against flood risks by structural measures is impossible. Therefore flood prediction is important for flood risk management. Good explanatory power of flood models requires a meaningful representation of bio-physical processes. Therefore great interest exists to improve the process representation. Progress in hydrological process understanding is achieved through a learning cycle including critical assessment of an existing model for a given catchment as a first step. The assessment will highlight deficiencies of the model, from which useful additional data requirements are derived, giving a guideline for new measurements. These new measurements may in turn lead to improved process concepts. The improved process concepts are finally summarized in an updated hydrological model. In this thesis I demonstrate such a learning cycle, focusing on the advancement of model evaluation methods and more cost effective measurements. For a successful model evaluation, I propose that three questions should be answered: 1) when is a model reproducing observations in a satisfactory way? 2) If model results deviate, of what nature is the difference? And 3) what are most likely the relevant model components affecting these differences? To answer the first two questions, I developed a new method to assess the temporal dynamics of model performance (or TIGER - TIme series of Grouped Errors). This method is powerful in highlighting recurrent patterns of insufficient model behaviour for long simulation periods. I answered the third question with the analysis of the temporal dynamics of parameter sensitivity (TEDPAS). For calculating TEDPAS, an efficient method for sensitivity analysis is necessary. I used such an efficient method called Fourier Amplitude Sensitivity Test, which has a smart sampling scheme. Combining the two methods TIGER and TEDPAS provided a powerful tool for model assessment. With WaSiM-ETH applied to the Weisseritz catchment as a case study, I found insufficient process descriptions for the snow dynamics and for the recession during dry periods in late summer and fall. Focusing on snow dynamics, reasons for poor model performance can either be a poor representation of snow processes in the model, or poor data on snow cover, or both. To obtain an improved data set on snow cover, time series of snow height and temperatures were collected with a cost efficient method based on temperature measurements on multiple levels at each location. An algorithm was developed to simultaneously estimate snow height and cold content from these measurements. Both, snow height and cold content are relevant quantities for spring flood forecasting. Spatial variability was observed at the local and the catchment scale with an adjusted sampling design. At the local scale, samples were collected on two perpendicular transects of 60 m length and analysed with geostatistical methods. The range determined from fitted theoretical variograms was within the range of the sampling design for 80% of the plots. No patterns were found, that would explain the random variability and spatial correlation at the local scale. At the watershed scale, locations of the extensive field campaign were selected according to a stratified sample design to capture the combined effects of elevation, aspect and land use. The snow height is mainly affected by the plot elevation. The expected influence of aspect and land use was not observed. To better understand the deficiencies of the snow module in WaSiM-ETH, the same approach, a simple degree day model was checked for its capability to reproduce the data. The degree day model was capable to explain the temporal variability for plots with a continuous snow pack over the entire snow season, if parameters were estimated for single plots. However, processes described in the simple model are not sufficient to represent multiple accumulation-melt-cycles, as observed for the lower catchment. Thus, the combined spatio-temporal variability at the watershed scale is not captured by the model. Further tests on improved concepts for the representation of snow dynamics at the Weißeritz are required. From the data I suggest to include at least rain on snow and redistribution by wind as additional processes to better describe spatio-temporal variability. Alternatively an energy balance snow model could be tested. Overall, the proposed learning cycle is a useful framework for targeted model improvement. The advanced model diagnostics is valuable to identify model deficiencies and to guide field measurements. The additional data collected throughout this work helps to get a deepened understanding of the processes in the Weisseritz catchment.
The terrestrial biosphere impacts considerably on the global carbon cycle. In particular, ecosystems contribute to set off anthropogenic induced fossil fuel emissions and hence decelerate the rise of the atmospheric CO₂ concentration. However, the future net sink strength of an ecosystem will heavily depend on the response of the individual processes to a changing climate. Understanding the makeup of these processes and their interaction with the environment is, therefore, of major importance to develop long-term climate mitigation strategies. Mathematical models are used to predict the fate of carbon in the soil-plant-atmosphere system under changing environmental conditions. However, the underlying processes giving rise to the net carbon balance of an ecosystem are complex and not entirely understood at the canopy level. Therefore, carbon exchange models are characterised by considerable uncertainty rendering the model-based prediction into the future prone to error. Observations of the carbon exchange at the canopy scale can help learning about the dominant processes and hence contribute to reduce the uncertainty associated with model-based predictions. For this reason, a global network of measurement sites has been established that provides long-term observations of the CO₂ exchange between a canopy and the atmosphere along with micrometeorological conditions. These time series, however, suffer from observation uncertainty that, if not characterised, limits their use in ecosystem studies. The general objective of this work is to develop a modelling methodology that synthesises physical process understanding with the information content in canopy scale data as an attempt to overcome the limitations in both carbon exchange models and observations. Similar hybrid modelling approaches have been successfully applied for signal extraction out of noisy time series in environmental engineering. Here, simple process descriptions are used to identify relationships between the carbon exchange and environmental drivers from noisy data. The functional form of these relationships are not prescribed a priori but rather determined directly from the data, ensuring the model complexity to be commensurate with the observations. Therefore, this data-led analysis results in the identification of the processes dominating carbon exchange at the ecosystem scale as reflected in the data. The description of these processes may then lead to robust carbon exchange models that contribute to a faithful prediction of the ecosystem carbon balance. This work presents a number of studies that make use of the developed data-led modelling approach for the analysis and interpretation of net canopy CO₂ flux observations. Given the limited knowledge about the underlying real system, the evaluation of the derived models with synthetic canopy exchange data is introduced as a standard procedure prior to any real data employment. The derived data-led models prove successful in several different applications. First, the data-based nature of the presented methods makes them particularly useful for replacing missing data in the observed time series. The resulting interpolated CO₂ flux observation series can then be analysed with dynamic modelling techniques, or integrated to coarser temporal resolution series for further use e.g., in model evaluation exercises. However, the noise component in these observations interferes with deterministic flux integration in particular when long time periods are considered. Therefore, a method to characterise the uncertainties in the flux observations that uses a semi-parametric stochastic model is introduced in a second study. As a result, an (uncertain) estimate of the annual net carbon exchange of the observed ecosystem can be inferred directly from a statistically consistent integration of the noisy data. For the forest measurement sites analysed, the relative uncertainty for the annual sum did not exceed 11 percent highlighting the value of the data. Based on the same models, a disaggregation of the net CO₂ flux into carbon assimilation and respiration is presented in a third study that allows for the estimation of annual ecosystem carbon uptake and release. These two components can then be further analysed for their separate response to environmental conditions. Finally, a fourth study demonstrates how the results from data-led analyses can be turned into a simple parametric model that is able to predict the carbon exchange of forest ecosystems. Given the global network of measurements available the derived model can now be tested for generality and transferability to other biomes. In summary, this work particularly highlights the potential of the presented data-led methodologies to identify and describe dominant carbon exchange processes at the canopy level contributing to a better understanding of ecosystem functioning.
Fußverkehr findet im gesamten öffentlichen Raum statt und ermöglicht die lückenlose Verbindung von Tür zu Tür. Jeder Mensch steht vor Beginn einer Fortbewegung vor den Fragen „Wo bin ich?“, „Wo liegt mein Ziel?“ und „Wie komme ich dahin?“. Ein Großteil der auf dem Markt befindlichen Navigationssysteme für Fußgänger stellen reduzierte Varianten aus Fahrzeugen dar und basieren auf 2D- Kartendarstellungen oder bilden die Realität als dreidimensionales Modell ab. Navigationsprobleme entstehen dann, wenn es dem Nutzer nicht gelingt, die Information aus der Anweisung auf die Wirklichkeit zu beziehen und umzusetzen. Ein möglicher Grund dafür liegt in der Visualisierung der Navigationsanweisung. Die räumliche Wahrnehmung des Menschen erfolgt ausgehend von einem bestimmten Betrachtungsstandpunkt und bringt die Lage von Objekten und deren Beziehung zueinander zum Ausdruck. Der Einsatz von Augmented Reality (erweiterte Realität) entspricht dem Erscheinungsbild der menschlichen Wahrnehmung und ist für Menschen eine natürliche und zugleich vertraute Ansichtsform. Im Unterschied zu kartographischer Visualisierung wird die Umwelt mittels Augmented Reality nicht modelliert, sondern realitätsgetreu abgebildet und ergänzt. Das Ziel dieser Arbeit ist ein Navigationsverfahren, das der natürlichen Fort-bewegung und Sichtweise von Fußgängern gerecht wird. Das Konzept basiert auf dem Einsatz einer Kombination aus Realität und virtueller Realität zu einer erweiterten Ansicht. Da keine Darstellungsform als die Route selbst besser geeignet ist, um einen Routenverlauf zu beschreiben, wird die Realität durch eine virtuelle Route erweitert. Die perspektivische Anpassung der Routendarstellung erfordert die sensorische Erfassung der Position und Lage des Betrachtungsstandpunktes. Das der Navigation zu Grunde liegende Datenmodell bleibt dem Betrachter dabei verborgen und ist nur in Form der erweiterten Realität sichtbar. Der im Rahmen dieser Arbeit entwickelte Prototyp trägt die Bezeichnung RealityView. Die Basis bildet ein freies und quelloffenes Navigationssystem, das für die Fußgängernavigation modular erweitert wurde. Das Ergebnis ist ein smartphonebasierter Navigationsprototyp, in dem die Ansichtsform einer zweidimensionalen Bildschirmkarte im Grundriss und die Darstellung einer erweiterten Realität im Aufriss kombiniert werden. Die Evaluation des Prototyps bestätigt die Hypothese, dass der Einsatz von Augmented Reality für die Navigation von Fußgängern möglich ist und von der Nutzergruppe akzeptiert wird. Darüber hinaus bescheinigen Wissenschaftler im Rahmen von Experten-interviews den konzeptionellen Ansatz und die prototypische Umsetzung des RealityView. Die Auswertung einer Eye-Tracking-Pilotstudie erbrachte den Nachweis, dass Fußgänger die Navigationsanweisung auf markante Objekte der Umwelt beziehen, deren Auswahl durch den Einsatz von Augmented Reality begünstigt wird.
Die Regierung des Waldes
(2022)
Wie verändert sich die Beziehung von Gesellschaften zu ihrer natürlichen Umgebung über die Zeit? Wie werden natürliche Systeme »in Wert« gesetzt? Und welchen Einfluss hat das auf die von uns so bezeichnete »Natur«? Am Beispiel eines Korkeichenwaldes in Marokko geht Juliane Schumacher diesen Fragen nach. Unter Bezugnahme auf Ansätze der Politischen Ökologie, der Science and Technology Studies und Foucaults Gouvernementalitätsanalyse zeigt sie, wie sich seit der Kolonialzeit die Bewirtschaftung des Waldes verändert hat. Dabei wird deutlich, wie Programme zur Integration der Wälder in globale Finanz- und Kohlenstoffmärkte zu neuen, experimentellen Formen der »Regierung des Waldes« führen.
River flooding is a constant peril for societies, causing direct economic losses in the order of $100 billion worldwide each year. Under global change, the prolonged concentration of people and assets in floodplains is accompanied by an emerging intensification of flood extremes due to anthropogenic global warming, ultimately exacerbating flood risk in many regions of the world.
Flood adaptation plays a key role in the mitigation of impacts, but poor understanding of vulnerability and its dynamics limits the validity of predominant risk assessment methods and impedes effective adaptation strategies. Therefore, this thesis investigates new methods for flood risk assessment that embrace the complexity of flood vulnerability, using the understudied commercial sector as an application example.
Despite its importance for accurate risk evaluation, flood loss modeling has been based on univariable and deterministic stage-damage functions for a long time. However, such simplistic methods only insufficiently describe the large variation in damage processes, which initiated the development of multivariable and probabilistic loss estimation techniques. The first study of this thesis developed flood loss models for companies that are based on emerging statistical and machine learning approaches (i.e., random forest, Bayesian network, Bayesian regression). In a benchmarking experiment on basis of object-level loss survey data, the study showed that all proposed models reproduced the heterogeneity in damage processes and outperformed conventional stage-damage functions with respect to predictive accuracy. Another advantage of the novel methods is that they convey probabilistic information in predictions, which communicates the large remaining uncertainties transparently and, hence, supports well-informed risk assessment.
Flood risk assessment combines vulnerability assessment (e.g., loss estimation) with hazard and exposure analyses. Although all of the three risk drivers interact and change over time, such dependencies and dynamics are usually not explicitly included in flood risk models. Recently, systemic risk assessment that dissolves the isolated consideration of risk drivers has gained traction, but the move to holistic risk assessment comes with limited thoroughness in terms of loss estimation and data limitations. In the second study, I augmented a socio-hydrological system dynamics model for companies in Dresden, Germany, with the multivariable Bayesian regression loss model from the first study. The additional process-detail and calibration data improved the loss estimation in the systemic risk assessment framework and contributed to more accurate and reliable simulations. The model uses Bayesian inference to quantify uncertainty and learn the model parameters from a combination of prior knowledge and diverse data.
The third study demonstrates the potential of the socio-hydrological flood risk model for continuous, long-term risk assessment and management. Using hydroclimatic ad socioeconomic forcing data, I projected a wide range of possible risk trajectories until the end of the century, taking into account the adaptive behavior of companies. The study results underline the necessity of increased adaptation efforts to counteract the expected intensification of flood risk due to climate change. A sensitivity analysis of the effectiveness of different adaptation measures and strategies revealed that optimized adaptation has the potential to mitigate flood risk by up to 60%, particularly when combining structural and non-structural measures. Additionally, the application shows that systemic risk assessment is capable of capturing adverse long-term feedbacks in the human-flood system such as the levee effect.
Overall, this thesis advances the representation of vulnerability in flood risk modeling by offering modeling solutions that embrace the complexity of human-flood interactions and quantify uncertainties consistently using probabilistic modeling. The studies show how scarce information in data and previous experiments can be integrated in the inference process to provide model predictions and simulations that are reliable and rich in information. Finally, the focus on the flood vulnerability of companies provides new insights into the heterogeneous damage processes and distinct flood coping of this sector.
Ziel dieser Arbeit ist es, ein sequentielles Extraktionsverfahren zur Erfassung unterschiedlich stabiler Anteile der orgnischen Bodensubstanz (OBS) zu entwickeln und zu klären, ob ein Zusammenhang zwischen Löslichkeit und Stabilität besteht. Darüber hinaus sollen der Einfluss von Bewirtschaftungsmaßnahmen auf Menge und Zusammensetzung dieser OBS-Anteile und Zusammenhänge zwischen Fourier Transform Infrarot (FT-IR)-Spektroskopiedaten und der Kationenaustauschkapazität (KAK) der OBS analysiert werden. Für die Untersuchungen wurden Böden der Langzeitfeldexperimente (LFE) in Halle, Bad Lauchstädt und Rotthalmünster beprobt. Zur Erfassung unterschiedlicher OBS-Fraktionen wurden im ersten Schritt die wasserlöslichen OBS-Anteile (OBS(W)-Fraktion) aus den Böden isoliert. Im zweiten Schritt wurden aus den Extraktionsrückständen der Wasserextraktion OBS-Anteile mit einer Natrium (Na)-Pyrophosphatlösung extrahiert (OBS(PY)-Fraktion). Die Stabilität der OBS-Fraktionen wurde anhand von δ13C-Bestimmungen und 14C-Messungen untersucht. Die Charakterisierung der Zusammensetzung der OBS-Fraktionen erfolgte mittels FT-IR Spektroskopie. Generell wird mit der OBS(PY)-Fraktion ein größerer Anteil am organischen Kohlenstoffgehalt der Böden erfasst als mit der OBS(W)-Fraktion. Die δ13C- und 14C-Daten zeigen, dass die OBS(W)-Fraktion höhere Anteile jungen organischen Materials als die OBS(PY)-Fraktion enthält. Das entwickelte sequentielle Extraktionsverfahren ist also prinzipiell geeignet unterschiedlich stabile OBS-Anteile anhand ihrer Löslichkeit zu isolieren. Mittels FT-IR spektroskopischer Untersuchungen wird festgestellt, dass Bewirtschaftungsmaßnahmen, wie die Düngung, sowie Standorteigenschaften die Zusammensetzung der OBS-Fraktionen beeinflussen. Für die OBS(PY)-Fraktion ist dies stärker ausgeprägt als für die OBS(W)-Fraktion. Die KAK der OBS(PY)-Fraktion aus den Böden der LFE in Halle und Bad Lauchstädt ist positiv mit der Absorptionsintensität der C=O-Bande in den FT-IR Spektren dieser OBS-Fraktion korreliert.
Exploring elections features from a geographical perspective is the focus of this study. Its primary objective is to develop a scientific approach based on geoinformation technology (GIT) that promotes deeper understanding how geographical settings affect the spatial and temporal variations of voting behaviour and election outcomes. For this purpose, the five parliamentary elections (1991-2005) following the political turnaround in 1990 in the South East European reform country Albania have been selected as a case study. Elections, like other social phenomena that do not develop uniformly over a territory, inherit a spatial dimension. Despite of fact that elections have been researched by various scientific disciplines ranging from political science to geography, studies that incorporate their spatial dimension are still limited in number and approaches. Consequently, the methodologies needed to generate an integrated knowledge on many facets that constitute election features are lacking. This study addresses characteristics and interactions of the essential elements involved in an election process. Thus, the baseline of the approach presented here is the exploration of relations between three entities: electorate (political and sociodemographic features), election process (electoral system and code) and place (environment where voters reside). To express this interaction the concept of electoral pattern is introduced. Electoral patterns are defined by the study as the final view of election results, chiefly in tabular and/or map form, generated by the complex interaction of social, economic, juridical, and spatial features of the electorate, which has occurred at a specific time and in a particular geographical location. GIT methods of geoanalysis and geovisualization are used to investigate the characteristics of electoral patterns in their spatial and temporal distribution. Aggregate-level data modelled in map form were used to analyse and visualize the spatial distribution of election patterns components and relations. The spatial dimension of the study is addressed in the following three main relations: One, the relation between place and electorate and its expression through the social, demographic and economic features of the electorate resulting in the profile of the electorate’s context; second, the electorate-election interaction which forms the baseline to explore the perspective of local contextual effects in voting behaviour and election results; third, the relation between geographical location and election outcomes reflecting the implication of determining constituency boundaries on election results. To address the above relations, three types of variables: geo, independent and dependent, have been elaborated and two models have been created. The Data Model, developed in a GIS environment, facilitates structuring of election data in order to perform spatial analysis. The peculiarity of electoral patterns – a multidimensional array that contains information on three variables, stored in data layers of dissimilar spatial units of reference and scales of value measurement – prohibit spatial analysis based on the original source data. To perform a joint spatial analysis it is therefore mandatory to restructure the spatial units of reference while preserving their semantic content. In this operation, all relevant electoral as well as socio-demographic data referenced to different administrative spatial entities are re-referenced to uniform grid cells as virtual spatial units of reference. Depending on the scale of data acquisition and map presentation, a cell width of 0.5 km has been determined. The resulting fine grid forms the basis of subsequent data analyses and correlations. Conversion of the original vector data layers into target raster layers allows for unification of spatial units, at the same time retaining the existing level of detail of the data (variables, uniform distribution over space). This in turn facilitates the integration of the variables studied and the performance of GIS-based spatial analysis. In addition, conversion to raster format makes it possible to assign new values to the original data, which are based on a common scale eliminating existing differences in scale of measurement. Raster format operations of the type described are well-established data analysis techniques in GIT, yet they have rarely been employed to process and analyse electoral data. The Geovisualization Model, developed in a cartographic environment, complements the Data Model. As an analog graphic model it facilitates efficient communication and exploration of geographical information through cartographic visualization. Based on this model, 52 choropleth maps have been generated. They represent the outcome of the GIS-based electoral data analysis. The analog map form allows for in-depth visual analysis and interpretation of the distribution and correlation of the electoral data studied. For researchers, decision makers and a wider public the maps provide easy-to-access information on and promote easy-to-understand insight into the spatial dimension, regional variation and resulting structures of the electoral patterns defined.
Die Landschaften Mitteleuropas sind das Resultat einer langwierigen Geschichte menschlicher Landnutzung mit ihren unterschiedlichen, z.T. konkurrierenden Nutzungsansprüchen. Durch eine überwiegend intensive Beanspruchung haben die direkten und indirekten Auswirkungen der Landnutzung in vielen Fällen zu Umweltproblemen geführt. Die Disziplin der Landschaftsökologie hat es sich zur Aufgabe gemacht, Konzepte für eine nachhaltige Nutzung der Landschaft zu entwickeln. Eine wichtige Fragestellung stellt dabei die Abschätzung der möglichen Folgen von Landnutzungsänderungen dar. Für die Analyse der relevanten Prozesse in der Landschaft werden häufig mathematische Modelle eingesetzt, welche es erlauben die Landschaft unter aktuellen Verhältnissen oder hinsichtlich veränderter Rahmenbedingungen zu untersuchen. Die hypothetische Änderung der Landnutzung, die als Landnutzungsszenario bezeichnet wird, verkörpert eine wesentliche Modifikation der Rahmenbedingungen, weil Landnutzung maßgeblich Einfluss auf die natürlichen Prozesse der Landschaft nimmt. Während die Antriebskräfte einer solchen Änderung überwiegend von sozio-ökonomischen und politischen Entscheidungen gesteuert werden, orientiert sich die exakte Verortung der Landnutzungsänderungen an den naturräumlichen Bedingungen und folgt z.T. erkennbaren Regeln. Anhand dieser Vorgaben ist es möglich, räumlich explizite Landnutzungsszenarien zu entwickeln, die als Eingangsdaten für die Modellierung verschiedener landschaftsökologischer Fragestellungen wie z.B. für die Untersuchung des Einflusses der Landnutzung auf den Wasserhaushalt, die Erosionsgefahr oder die Habitatqualität dienen können. Im Rahmen dieser Dissertation wurde das rasterbasierte deterministische Allokationsmodell luck (Land Use Change Scenario Kit) für die explizite Verortung der Landnutzungsänderungen entwickelt. Es basiert auf den in der Landschaftsökologie üblichen räumlichen Daten wie Landnutzung, Boden sowie Topographie und richtet sich bei der Szenarienableitung nach den Leitbildern der Landschaftsplanung. Das Modell fußt auf der Hypothese, dass das Landnutzungsmuster als Funktion seiner landschaftsökologischen Faktoren beschrieben werden kann. Das Veränderungspotenzial einer Landnutzungseinheit resultiert im Modell aus einer Kombination der Bewertung der relativen Eignung des Standortes für die jeweilige Landnutzung und der Berücksichtigung von Standorteigenschaften der umliegenden Nachbarn. Die Durchführung der Landnutzungsänderung im Modell ist iterativ angelegt, um den graduellen Prozess des Landschaftswandels nachvollziehen zu können. Als Fallbeispiel für die Anwendung solcher räumlich expliziten Landnutzungsszenarien dient die Fragestellung, inwieweit Landnutzungsänderungen die Hochwasserentstehung beeinflussen. Um den Einfluss auf die Hochwasserentstehung für jede der Landnutzungskategorien – bebaute, landwirtschaftlich genutzte und naturnahe Flächen – abschätzen zu können, wird im Landnutzungsmodell luck exemplarisch für jede Kategorie ein Teilmodell für die Veränderung von Landnutzung angeboten: 1) Ausdehnung der Siedlungsfläche: Dieses Teilmodell fußt auf der Annahme, dass sich Siedlungen nur in direkter Nachbarschaft bereits bestehender Bebauung und bevorzugt entlang von Entwicklungsachsen ausbreiten. Steile Hangneigungen stellen für potenzielle Standorte ein Hemmnis bei der Ausbreitung dar. 2) Stilllegung von Grenzertragsackerflächen: Gemäß der Hypothese, dass sich die Stilllegung von Ackerflächen an der potenziellen Ertragsleistung der Standorte orientiert, werden in diesem Teilmodell alle Ackerstandorte dahingehend bewertet und die Flächen mit der geringsten Leistungsfähigkeit stillgelegt. Bei homogenen Gebietseigenschaften werden die Stilllegungsflächen zufällig auf die Ackerfläche verteilt. 3) Etablierung von Schutzgebieten in Ufer- und Auenbereichen: Ausgehend von der These, dass sich entlang von Flüssen sensible Flächen befinden, deren Schutz positive Folgen für das Leistungsvermögen der Landschaft haben kann, werden in diesem Teilmodell schützenswerte Ufer- und Auenbereiche auf derzeit landwirtschaftlich genutzten Flächen ausgewiesen. Die Größe der Schutzgebietsfläche orientiert sich an der Morphologie der umgebenden Landschaft. Die drei Teilmodelle wurden hinsichtlich der implizierten Hypothesen mit vielen unterschiedlichen Ansätzen validiert. Das Resultat dieser intensiven Analyse zeigt für jedes Teilmodell eine zufriedenstellende Tauglichkeit. Die Modellierung der Landnutzungsänderungen wurden in drei mesoskaligen Flusseinzugsgebieten mit einer Fläche zwischen 100 und 500 km² durchgeführt, die sich markant in ihrer Landnutzung unterscheiden. Besonderer Wert wurde bei der Gebietsauswahl darauf gelegt, dass eines der Gebiete intensiv landwirtschaftlich genutzt wird, eines dicht besiedelt und eines vorwiegend bewaldet ist. Im Hinblick auf ihre Relevanz für die vorliegende Fragestellung wurden aus bestehenden Landnutzungstrends die Szenarien für (1) die prognostizierte Siedlungsfläche für das Jahr 2010, (2) die möglichen Konsequenzen des EU-weiten Beschlusses der Agenda 2000 und (3) die Novelle des Bundesnaturschutzgesetzes aus dem Jahr 2001 abgeleitet. Jedes Szenario wurde mit Hilfe des Modells auf die drei Untersuchungsgebiete angewendet. Dabei wurden für die Siedlungsausdehnung in allen drei Gebieten realistische Landnutzungsmuster generiert. Einschränkungen ergeben sich bei der Suche nach Grenzertragsstilllegungsflächen. Hier hat unter homogenen Gebietseigenschaften die zufällige Verteilung von Flächen für die Stilllegung zu einem unrealistischen Ergebnis geführt. Die Güte der Schutzgebietsausweisung ist maßgeblich an die aktuelle Landnutzung der Aue und die Morphologie des Geländes gebunden. Die besten Ergebnisse werden erzielt, wenn die Flächen in den Ufer- und Auenbereichen mehrheitlich unter derzeitiger Ackernutzung stehen und der Flusslauf sich in das Relief eingetieft hat. Exemplarisch werden für jeden Landnutzungstrend die hydrologischen Auswirkungen anhand eines historischen Hochwassers beschrieben, aus denen jedoch keine pauschale Aussage zum Einfluss der Landnutzung abgeleitet werden kann. Die Studie demonstriert die Bedeutung des Landnutzungsmusters für die natürlichen Prozesse in der Landschaft und unterstreicht die Notwendigkeit einer räumlich expliziten Modellierung für landschaftsökologische Fragestellungen in der Mesoskala.
Mit der vorliegenden Arbeit werden exemplarisch Chancen und Grenzen der Integration von Umwelt- und Naturschutz in Verfahren der ackerbaulichen Landnutzung aufgezeigt. Die Umsetzung von Zielen des Umwelt- und Naturschutzes in Verfahren der Landnutzung ist mit verschiedenen Schwierigkeiten verbunden. Diese liegen zum einen in der Konkretisierung der Ziele, um diese umsetzen zu können, zum anderen in vielfach unzulänglichem Wissen über den Zusammenhang zwischen unterschiedlichen Formen der Landnutzung und insbesondere den biotischen Naturschutzzielen. Zunächst wird die Problematik der Zielfestlegung und Konkretisierung erörtert. Das Umweltqualitätszielkonzept von Fürst et al. (1992) stellt einen Versuch dar, Ziele des Umwelt- und Naturschutzes zu konkretisieren. Dieses Konzept haben Heidt et al. (1997) auf einen Landschaftsausschnitt von ca. 6000 ha im Biosphärenreservat Schorfheide-Chorin im Nordosten Brandenburgs angewendet. Eine Auswahl der von Heidt et al. (1997) formulierten Umweltqualitätsziele bildet die Basis dieser Arbeit. Für die ausgewählten Umweltqualitätsziele wurden wesentliche Einflussfaktoren der Landnutzung identifiziert und ein Bewertungssystem entwickelt, mit dem die Auswirkungen von landwirtschaftlichen Anbauverfahren auf diese Umweltqualitätsziele abgebildet werden können. Die praktizierte Landnutzung von 20 Betrieben im Biosphärenreservat Schorfheide-Chorin wurde von 1994 bis 1997 hinsichtlich ihrer Auswirkungen auf die Umweltqualitätsziele analysiert. Die Analyse ergab ein sehr differenziertes Bild, das zum Teil Unterschiede in der Auswirkung auf die Umweltqualitätsziele für den Anbau einzelner Kulturen oder für bestimmte Betriebstypen zeigte. Es zeigte sich aber auch, dass es bei der Gestaltung des Anbaus einzelner Kulturarten große Unterschiede gab, die für Umweltqualitätsziele Bedeutung haben. Neben der Analyse der Landnutzung im Biosphärenreservat Schorfheide-Chorin wurde ein System entwickelt, mit dem die modellhafte Abbildung von Verfahren der Landnutzung möglich ist. Die Modellverfahren wurden in eine umfangreiche Datenbank eingebunden. Sie wurden mit Hilfe eines Fuzzy- Regelsystems hinsichtlich ihrer Auswirkungen auf die Umweltqualitätsziele bewertet. Die systematisch bewerteten Verfahren wurden in ein Betriebsmodell integriert, womit eine weitergehende Analyse der Zielbeziehungen und die Berechnung von Szenarien mit unterschiedlichen Rahmenbedingungen ermöglicht wurde. Die Analyse der Beziehung verschiedener Ziele zueinander (Zieldivergenz, Zielkonvergenz) zeigte, dass sich mit der Verfolgung vieler Umweltqualitätsziele auch positive Effekte für andere Umweltqualitätsziele ergaben. Teilweise konnte allerdings auch eine Zieldivergenz festgestellt werden, die auf mögliche Zielkonflikte hinweist. Bei der Analyse der Szenarienergebnisse zeigte sich, dass die vorgeschlagenen Veränderungen von Rahmenbedingungen vielfach eine Verschlechterung für verschiedene Umweltqualitätsziele mit sich bringen. Eine Ursache dafür liegt darin, dass bei der Definition der Szenarien die Bedeutung der Stilllegungen unterschätzt wurde.
Entwicklung, Implementierung und Erprobung eines planetaren Informationssystems auf Basis von ArcGIS
(2007)
Mit der Entwicklung der modernen Raumfahrt Mitte der 60er-Jahre des zwanzigsten Jahrhunderts und der Eroberung des Weltraums brach eine neue Epoche der bis dato auf Beobachtungen mit dem Teleskop gestützten planetaren Forschung an. Während des Wettrennens um die technologische Führerschaft im All zur Zeit des Kalten Krieges war das erste Ziel die Entsendung von Satelliten zur Erdbeobachtung, denen aber schon bald Sonden zum Mond und den benachbarten Planeten folgten. Diese Missionen lieferten eine enorme Fülle von Informationen in Form von Bildern und Messergebnissen in unterschiedlichen Datenformaten. Diese galt und gilt es zu strukturieren, zu verwalten, zu aktualisieren und zu interpretieren. Für die Interpretation terrestrischer Daten werden geographische Informationssysteme (GIS) hinzugezogen, die jedoch für planetare Anwendungen aufgrund unterschiedlicher Voraussetzungen nicht ohne weiteres eingesetzt werden können. Daher wurde im Rahmen dieser Arbeit die für die Verwaltung von geographischen Daten der Erdfernerkundung kommerziell erhältliche Software ArcGIS Desktop 9.0 / 9.1 (ESRI) mit eigenen Programmen und Modulen für die Planetenforschung angepasst. Diese ermöglichen die Aufbereitung und den Import planetarer Bild- und Textinformation in die kommerzielle Software. Zusätzlich wurde eine planetare Datenbank zur Speicherung und zentralen Verwaltung der Informationen aufgebaut. Die im Rahmen dieser Arbeit entwickelten Softwarekomponenten ermöglichen die schnelle und benutzerfreundliche Aufbereitung der in der Datenbank gehaltenen Informationen und das Auslesen in Dateiformate, die für geographische Informationssysteme geeignet sind. Des Weiteren wurde eine „Werkzeugleiste“ für ArcGIS entwickelt, die das Arbeiten mit planetaren Datensätzen beträchtlich beschleunigt und vereinfacht. Sie beinhaltet auch Module zur wissenschaftlichen Interpretation der planetaren Informationen, wie beispielsweise der Berechnung der Oberflächenrauigkeit der Marsoberfläche inklusive der flächendeckenden Kalibrierung der Eingangs-Basisdaten. Exemplarisch konnte gezeigt werden, dass das Verfahren eine verbesserte Berechnung der Oberflächenrauigkeit ermöglicht, als bisher angewandte Ansätze. Zudem wurde eine auf ArcGIS basierende Prozesskette zur Berechnung von hierarchischen Flussnetzen entwickelt und erprobt. Das terrestrische Beispiel, die Analyse eines Abflusssystems auf Island, zeigte eine sehr große Übereinstimmung der errechneten Gewässernetze mit den morphologischen Gegebenheiten vor Ort. Daraus ließ sich eine hohe Genauigkeit der mit demselben Ansatz errechneten Gewässernetze auf dem Mars ableiten. Auf der Grundlage der in dieser Arbeit entwickelten Programme und Module lassen sich auch Daten zukünftiger Missionen aufbereiten und in ein solches System einbinden, um diese mit eigenen Ansätzen zu verwalten, zu aktualisieren und für neue wissenschaftliche Fragestellungen perfekt anzupassen, einzusetzen und zu präsentieren, um so neue wissenschaftliche Erkenntnisse in der Planetenforschung zu gewinnen.
Die Arbeit gibt einen Einblick in die Verständigungspraxen bei Stadtführungen mit (ehemaligen) Obdachlosen, die in ihrem Selbstverständnis auf die Herstellung von Verständnis, Toleranz und Anerkennung für von Obdachlosigkeit betroffene Personen zielen. Zunächst wird in den Diskurs des Slumtourismus eingeführt und, angesichts der Vielfalt der damit verbundenen Erscheinungsformen, Slumming als organisierte Begegnung mit sozialer Ungleichheit definiert. Die zentralen Diskurslinien und die darin eingewobenen moralischen Positionen werden nachvollzogen und im Rahmen der eigenommenen wissenssoziologischen Perspektive als Ausdruck einer per se polykontexturalen Praxis re-interpretiert. Slumming erscheint dann als eine organisierte Begegnung von Lebensformen, die sich in einer Weise fremd sind, als dass ein unmittelbares Verstehen unwahrscheinlich erscheint und genau aus diesem Grund auf der Basis von gängigen Interpretationen des Common Sense ausgehandelt werden muss. Vor diesem Hintergrund untersucht die vorliegende Arbeit, wie sich Teilnehmer und Stadtführer über die Erfahrung der Obdachlosigkeit praktisch verständigen und welcher Art das hierüber erzeugte Verständnis für die im öffentlichen Diskurs mit vielfältigen stigmatisierenden Zuschreibungen versehenen Obdachlosen ist. Dabei interessiert besonders, in Bezug auf welche Aspekte der Erfahrung von Obdachlosigkeit ein gemeinsames Verständnis möglich wird und an welchen Stellen dieses an Grenzen gerät. Dazu wurden die Gesprächsverläufe auf neun Stadtführungen mit (ehemaligen) obdachlosen Stadtführern unterschiedlicher Anbieter im deutschsprachigen Raum verschriftlicht und mit dem Verfahren der Dokumentarischen Methode ausgewertet. Die vergleichende Betrachtung der Verständigungspraxen eröffnet nicht zuletzt eine differenzierte Perspektive auf die in den Prozessen der Verständigung immer schon eingewobenen Anerkennungspraktiken. Mit Blick auf die moralische Debatte um organisierte Begegnungen mit sozialer Ungleichheit wird dadurch eine ethische Perspektive angeregt, in deren Zentrum Fragen zur Vermittlungsarbeit stehen.
Vor dem Hintergrund der Auffassung, dass ethnische Minderheiten eine Form so-zialer Organisation darstellen, verfolgt die Studie – unter Berücksichtigung der Mehr-deutigkeit des Raumbegriffs – das Ziel, anhand von Beispielen aus Rumänien ein Konzept zu entwickeln, mit dem sich die aktuelle Beziehung von Ethnizität und Raum im Transformationsprozess adäquat analysieren und beschreiben lässt.
Evaluation of nitrogen dynamics in high-order streams and rivers based on high-frequency monitoring
(2023)
Nutrient storage, transform and transport are important processes for achieving environmental and ecological health, as well as conducting water management plans. Nitrogen is one of the most noticeable elements due to its impacts on tremendous consequences of eutrophication in aquatic systems. Among all nitrogen components, researches on nitrate are blooming because of widespread deployments of in-situ high-frequency sensors. Monitoring and studying nitrate can become a paradigm for any other reactive substances that may damage environmental conditions and cause economic losses.
Identifying nitrate storage and its transport within a catchment are inspiring to the management of agricultural activities and municipal planning. Storm events are periods when hydrological dynamics activate the exchange between nitrate storage and flow pathways. In this dissertation, long-term high-frequency monitoring data at three gauging stations in the Selke river were used to quantify event-scale nitrate concentration-discharge (C-Q) hysteretic relationships. The Selke catchment is characterized into three nested subcatchments by heterogeneous physiographic conditions and land use. With quantified hysteresis indices, impacts of seasonality and landscape gradients on C-Q relationships are explored. For example, arable area has deep nitrate legacy and can be activated with high intensity precipitation during wetting/wet periods (i.e., the strong hydrological connectivity). Hence, specific shapes of C-Q relationships in river networks can identify targeted locations and periods for agricultural management actions within the catchment to decrease nitrate output into downstream aquatic systems like the ocean.
The capacity of streams for removing nitrate is of both scientific and social interest, which makes the quantification motivated. Although measurements of nitrate dynamics are advanced compared to other substances, the methodology to directly quantify nitrate uptake pathways is still limited spatiotemporally. The major problem is the complex convolution of hydrological and biogeochemical processes, which limits in-situ measurements (e.g., isotope addition) usually to small streams with steady flow conditions. This makes the extrapolation of nitrate dynamics to large streams highly uncertain. Hence, understanding of in-stream nitrate dynamic in large rivers is still necessary. High-frequency monitoring of nitrate mass balance between upstream and downstream measurement sites can quantitatively disentangle multi-path nitrate uptake dynamics at the reach scale (3-8 km). In this dissertation, we conducted this approach in large stream reaches with varying hydro-morphological and environmental conditions for several periods, confirming its success in disentangling nitrate uptake pathways and their temporal dynamics. Net nitrate uptake, autotrophic assimilation and heterotrophic uptake were disentangled, as well as their various diel and seasonal patterns. Natural streams generally can remove more nitrate under similar environmental conditions and heterotrophic uptake becomes dominant during post-wet seasons. Such two-station monitoring provided novel insights into reach-scale nitrate uptake processes in large streams.
Long-term in-stream nitrate dynamics can also be evaluated with the application of water quality model. This is among the first time to use a data-model fusion approach to upscale the two-station methodology in large-streams with complex flow dynamics under long-term high-frequency monitoring, assessing the in-stream nitrate retention and its responses to drought disturbances from seasonal to sub-daily scale. Nitrate retention (both net uptake and net release) exhibited substantial seasonality, which also differed in the investigated normal and drought years. In the normal years, winter and early spring seasons exhibited extensive net releases, then general net uptake occurred after the annual high-flow season at later spring and early summer with autotrophic processes dominating and during later summer-autumn low-flow periods with heterotrophy-characteristics predominating. Net nitrate release occurred since late autumn until the next early spring. In the drought years, the late-autumn net releases were not so consistently persisted as in the normal years and the predominance of autotrophic processes occurred across seasons. Aforementioned comprehensive results of nitrate dynamics on stream scale facilitate the understanding of instream processes, as well as raise the importance of scientific monitoring schemes for hydrology and water quality parameters.
Energy is at the heart of the climate crisis—but also at the heart of any efforts for climate change mitigation. Energy consumption is namely responsible for approximately three quarters of global anthropogenic greenhouse gas (GHG) emissions. Therefore, central to any serious plans to stave off a climate catastrophe is a major transformation of the world's energy system, which would move society away from fossil fuels and towards a net-zero energy future. Considering that fossil fuels are also a major source of air pollutant emissions, the energy transition has important implications for air quality as well, and thus also for human and environmental health. Both Europe and Germany have set the goal of becoming GHG neutral by 2050, and moreover have demonstrated their deep commitment to a comprehensive energy transition. Two of the most significant developments in energy policy over the past decade have been the interest in expansion of shale gas and hydrogen, which accordingly have garnered great interest and debate among public, private and political actors.
In this context, sound scientific information can play an important role by informing stakeholder dialogue and future research investments, and by supporting evidence-based decision-making. This thesis examines anticipated environmental impacts from possible, relevant changes in the European energy system, in order to impart valuable insight and fill critical gaps in knowledge. Specifically, it investigates possible future shale gas development in Germany and the United Kingdom (UK), as well as a hypothetical, complete transition to hydrogen mobility in Germany. Moreover, it assesses the impacts on GHG and air pollutant emissions, and on tropospheric ozone (O3) air quality. The analysis is facilitated by constructing emission scenarios and performing air quality modeling via the Weather Research and Forecasting model coupled with chemistry (WRF-Chem). The work of this thesis is presented in three research papers.
The first paper finds that methane (CH4) leakage rates from upstream shale gas development in Germany and the UK would range between 0.35% and 1.36% in a realistic, business-as-usual case, while they would be significantly lower - between 0.08% and 0.15% - in an optimistic, strict regulation and high compliance case, thus demonstrating the value and potential of measures to substantially reduce emissions. Yet, while the optimistic case is technically feasible, it is unlikely that the practices and technologies assumed would be applied and accomplished on a systematic, regular basis, owing to economics and limited monitoring resources. The realistic CH4 leakage rates estimated in this study are comparable to values reported by studies carried out in the US and elsewhere. In contrast, the optimistic rates are similar to official CH4 leakage data from upstream gas production in Germany and in the UK. Considering that there is a lack of systematic, transparent and independent reports supporting the official values, this study further highlights the need for more research efforts in this direction. Compared with national energy sector emissions, this study suggests that shale gas emissions of volatile organic compounds (VOCs) could be significant, though relatively insignificant for other air pollutants. Similar to CH4, measures could be effective for reducing VOCs emissions.
The second paper shows that VOC and nitrogen oxides (NOx) emissions from a future shale gas industry in Germany and the UK have potentially harmful consequences for European O3 air quality on both the local and regional scale. The results indicate a peak increase in maximum daily 8-hour average O3 (MDA8) ranging from 3.7 µg m-3 to 28.3 µg m-3. Findings suggest that shale gas activities could result in additional exceedances of MDA8 at a substantial percentage of regulatory measurement stations both locally and in neighboring and distant countries, with up to circa one third of stations in the UK and one fifth of stations in Germany experiencing additional exceedances. Moreover, the results reveal that the shale gas impact on the cumulative health-related metric SOMO35 (annual Sum of Ozone Means Over 35 ppb) could be substantial, with a maximum increase of circa 28%. Overall, the findings suggest that shale gas VOC emissions could play a critical role in O3 enhancement, while NOx emissions would contribute to a lesser extent. Thus, the results indicate that stringent regulation of VOC emissions would be important in the event of future European shale gas development to minimize deleterious health outcomes.
The third paper demonstrates that a hypothetical, complete transition of the German vehicle fleet to hydrogen fuel cell technology could contribute substantially to Germany's climate and air quality goals. The results indicate that if the hydrogen were to be produced via renewable-powered water electrolysis (green hydrogen), German carbon dioxide equivalent (CO2eq) emissions would decrease by 179 MtCO2eq annually, though if electrolysis were powered by the current electricity mix, emissions would instead increase by 95 MtCO2eq annually. The findings generally reveal a notable anticipated decrease in German energy emissions of regulated air pollutants. The results suggest that vehicular hydrogen demand is 1000 PJ annually, which would require between 446 TWh and 525 TWh for electrolysis, hydrogen transport and storage. When only the heavy duty vehicle segment (HDVs) is shifted to green hydrogen, the results of this thesis show that vehicular hydrogen demand drops to 371 PJ, while a deep emissions cut is still realized (-57 MtCO2eq), suggesting that HDVs are a low-hanging fruit for contributing to decarbonization of the German road transport sector with hydrogen energy.
The estimation of financial losses is an integral part of flood risk assessment. The application of existing flood loss models on locations or events different from the ones used to train the models has led to low performance, showing that characteristics of the flood damaging process have not been sufficiently well represented yet. To improve flood loss model transferability, I explore various model structures aiming at incorporating different (inland water) flood types and pathways. That is based on a large survey dataset of approximately 6000 flood-affected households which addresses several aspects of the flood event, not only the hazard characteristics but also information on the affected building, socioeconomic factors, the household's preparedness level, early warning, and impacts. Moreover, the dataset reports the coincidence of different flood pathways. Whilst flood types are a classification of flood events reflecting their generating process (e.g. fluvial, pluvial), flood pathways represent the route the water takes to reach the receptors (e.g. buildings). In this work, the following flood pathways are considered: levee breaches, river floods, surface water floods, and groundwater floods.
The coincidence of several hazard processes at the same time and place characterises a compound event. In fact, many flood events develop through several pathways, such as the ones addressed in the survey dataset used. Earlier loss models, although developed with one or multiple predictor variables, commonly use loss data from a single flood event which is attributed to a single flood type, disregarding specific flood pathways or the coincidence of multiple pathways. This gap is addressed by this thesis through the following research questions: 1. In which aspects do flood pathways of the same (compound inland) flood event differ? 2. How much do factors which contribute to the overall flood loss in a building differ in various settings, specifically across different flood pathways? 3. How well can Bayesian loss models learn from different settings? 4. Do compound, that is, coinciding flood pathways result in higher losses than a single pathway, and what does the outcome imply for future loss modelling?
Statistical analysis has found that households affected by different flood pathways also show, in general, differing characteristics of the affected building, preparedness, and early warning, besides the hazard characteristics. Forecasting and early warning capabilities and the preparedness of the population are dominated by the general flood type, but characteristics of the hazard at the object-level, the impacts, and the recovery are more related to specific flood pathways, indicating that risk communication and loss models could benefit from the inclusion of flood-pathway-specific information.
For the development of the loss model, several potentially relevant predictors are analysed: water depth, duration, velocity, contamination, early warning lead time, perceived knowledge about self-protection, warning information, warning source, gap between warning and action, emergency measures, implementation of property-level precautionary measures (PLPMs), perceived efficacy of PLPMs, previous flood experience, awareness of flood risk, ownership, building type, number of flats, building quality, building value, house/flat area, building area, cellar, age, household size, number of children, number of elderly residents, income class, socioeconomic status, and insurance against floods. After a variable selection, descriptors of the hazard, building, and preparedness were deemed significant, namely: water depth, contamination, duration, velocity, building area, building quality, cellar, PLPMs, perceived efficacy of PLPMs, emergency measures, insurance, and previous flood experience. The inclusion of the indicators of preparedness is relevant, as they are rarely involved in loss datasets and in loss modelling, although previous studies have shown their potential in reducing losses. In addition, the linear model fit indicates that the explanatory factors are, in several cases, differently relevant across flood pathways.
Next, Bayesian multilevel models were trained, which intrinsically incorporate uncertainties and allow for partial pooling (i.e. different groups of data, such as households affected by different flood pathways, can learn from each other), increasing the statistical power of the model. A new variable selection was performed for this new model approach, reducing the number of predictors from twelve to seven variables but keeping factors of the hazard, building, and preparedness, namely: water depth, contamination, duration, building area, PLPMs, insurance, and previous flood experience. The new model was trained not only across flood pathways but also across regions of Germany, divided according to general socioeconomic factors and insurance policies, and across flood events. The distinction across regions and flood events did not improve loss modelling and led to a large overlap of regression coefficients, with no clear trend or pattern. The distinction of flood pathways showed credibly distinct regression coefficients, leading to a better understanding of flood loss modelling and indicating one potential reason why model transferability has been challenging.
Finally, new model structures were trained to include the possibility of compound inland floods (i.e. when multiple flood pathways coincide on the same affected asset). The dataset does not allow for verifying in which sequence the flood pathway waves occurred and predictor variables reflect only their mixed or combined outcome. Thus, two Bayesian models were trained: 1. a multi-membership model, a structure which learns the regression coefficients for multiple flood pathways at the same time, and 2. a multilevel model wherein the combination of coinciding flood pathways makes individual categories. The multi-membership model resulted in credibly different coefficients across flood pathways but did not improve model performance in comparison to the model assuming only a single dominant flood pathway. The model with combined categories signals an increase in impacts after compound floods, but due to the uncertainty in model coefficients and estimates, it is not possible to ascertain such an increase as credible. That is, with the current level of uncertainty in differentiating the flood pathways, the loss estimates are not credibly distinct from individual flood pathways.
To overcome the challenges faced, non-linear or mixed models could be explored in the future. Interactions, moderation, and mediation effects, as well as non-linear effects, should also be further studied. Loss data collection should regularly include preparedness indicators, and either data collection or hydraulic modelling should focus on the distinction of coinciding flood pathways, which could inform loss models and further improve estimates. Flood pathways show distinct (financial) impacts, and their inclusion in loss modelling proves relevant, for it helps in clarifying the different contribution of influencing factors to the final loss, improving understanding of the damaging process, and indicating future lines of research.
Gegenstand dieser Arbeit ist die Konzeption, Entwicklung und exemplarische Implementierung eines generischen Verfahrens zur Erfassung, Verarbeitung, Auswertung und kartographischen Visualisierung urbaner Strukturen im altweltlichen Trockengürtel mittels hochauflösender operationeller Fernerkundungsdaten. Das Verfahren wird am Beispiel der jemenitischen Hauptstadt Sanaa einer Vertreterin des Typus der Orientalischen Stadt angewandt und evaluiert. Das zu entwickelnde Verfahren soll auf Standardverfahren und Systemen der raumbezogenen Informationsverarbeitung basieren und in seinen wesentlichen Prozessschritten automatisiert werden können. Daten von hochauflösenden operationellen Fernerkundungssystemen (wie z.B. QuickBird, Ikonos u. a.) erlauben die Erkennung und Kartierung urbaner Objekte, wie Gebäude, Straßen und sogar Autos. Die mit ihnen erstellten Karten und den daraus gewonnenen Informationen können zur Erfassung von Urbanisierungsprozessen (Stadt- und Bevölkerungswachstum) herangezogen werden. Sie werden auch zur Generierung von 3D-Stadtmodellen genutzt. Diese dienen z.B. der Visualisierung für touristische Anwendungen, für die Stadtplanung, für Lärmanalysen oder für die Standortplanung von Mobilfunkantennen. Bei dem in dieser Arbeit erzeugten 3D-Visualisierung wurden jedoch keine Gebäudedetails erfasst. Entscheidend war vielmehr die Wiedergabe der Siedlungsstruktur, die im Vorhandensein und in der Anordnung der Gebäude liegt. In dieser Arbeit wurden Daten des Satellitensensors Quickbird von 2005 verwendet. Sie zeigen einen Ausschnitt der Stadt Sanaa in Jemen. Die Fernerkundungsdaten wurden durch andere Daten, u.a. auch Geländedaten, ergänzt und verifiziert. Das ausgearbeitete Verfahren besteht aus der Klassifikation der Satellitenbild-aufnahme, die u.a. pixelbezogen und für jede Klasse einzeln (pixelbezogene Klassifikation auf Klassenebene) durchgeführt wurde. Zusätzlich fand eine visuelle Interpretation der Satellitenbildaufnahme statt, bei der einzelne Flächen und die Straßen digitalisiert und die Objekte mit Symbolen gekennzeichnet wurden. Die aus beiden Verfahren erstellten Stadtkarten wurden zu einer fusioniert. Durch die Kombination der Ergebnisse werden die Vorteile beider Karten in einer vereint und ihre jeweiligen Schwächen beseitigt bzw. minimiert. Die digitale Erfassung der Konturlinien auf der Orthophotomap von Sanaa erlaubte die Erstellung eines Digitalen Geländemodells, das der dreidimensionalen Darstellung des Altstadtbereichs von Sanaa diente. Die 3D-Visualisierung wurde sowohl von den pixelbezogenen Klassifikationsergebnissen auf Klassenebene als auch von der digitalen Erfassung der Objekte erstellt. Die Ergebnisse beider Visualisierungen wurden im Anschluss in einer Stadtkarte vereint. Bei allen Klassifikationsverfahren wurden die asphaltierten Straßen, die Vegetation und einzeln stehende Gebäude sehr gut erfasst. Die Klassifikation der Altstadt gestaltete sich aufgrund der dort für die Klassifikation herrschenden ungünstigen Bedingungen am problematischsten. Die insgesamt besten Ergebnisse mit den höchsten Genauigkeitswerten wurden bei der pixelbezogenen Klassifikation auf Klassenebene erzielt. Dadurch, dass jede Klasse einzeln klassifiziert wurde, konnte die zu einer Klasse gehörende Fläche besser erfasst und nachbearbeitet werden. Die Datenmenge wurde reduziert, die Bearbeitungszeit somit kürzer und die Speicherkapazität geringer. Die Auswertung bzw. visuelle Validierung der pixel-bezogenen Klassifikationsergebnisse auf Klassenebene mit dem Originalsatelliten-bild gestaltete sich einfacher und erfolgte genauer als bei den anderen durch-geführten Klassifikationsverfahren. Außerdem war es durch die alleinige Erfassung der Klasse Gebäude möglich, eine 3D-Visualisierung zu erzeugen. Bei einem Vergleich der erstellten Stadtkarten ergibt sich, dass die durch die visuelle Interpretation erstellte Karte mehr Informationen enthält. Die von den pixelbezogenen Klassifikationsergebnissen auf Klassenebene erstellte Karte ist aber weniger arbeits- und zeitaufwendig zu erzeugen. Zudem arbeitet sie die Struktur einer orientalischen Stadt mit den wesentlichen Merkmalen besser heraus. Durch die auf Basis der 2D-Stadtkarten erstellte 3D-Visualisierung wird ein anderer räumlicher Eindruck vermittelt und bestimmte Elemente einer orientalischen Stadt deutlich gemacht. Dazu zählen die sich in der Altstadt befindenden Sackgassen und die ehemalige Stadtmauer. Auch die für Sanaa typischen Hochhäuser werden in der 3D-Visualisierung erkannt. Insgesamt wurde in der Arbeit ein generisches Verfahren entwickelt, dass mit geringen Modifikationen auch auf andere städtische Räume des Typus orientalische Stadt angewendet werden kann.
Studies of the role of disturbance in vegetation or ecosystems showed that disturbances are an essential and intrinsic element of ecosystems that contribute substantially to ecosystem health, to structural diversity of ecosystems and to nutrient cycling at the local as well as global level. Fire as a grassland, bush or forest fire is a special disturbance agent, since it is caused by biotic as well abiotic environmental factors. Fire affects biogeochemical cycles and plays an important role in atmospheric chemistry by releasing climate-sensitive trace gases and aerosols, and thus in the global carbon cycle by releasing approximately 3.9 Gt C p.a. through biomass burning. A combined model to describe effects and feedbacks between fire and vegetation became relevant as changes in fire regimes due to land use and land management were observed and the global dimension of biomass burnt as an important carbon flux to the atmosphere, its influence on atmospheric chemistry and climate as well as vegetation dynamics were emphasized. The existing modelling approaches would not allow these investigations. As a consequence, an optimal set of variables that best describes fire occurrence, fire spread and its effects in ecosystems had to be defined, which can simulate observed fire regimes and help to analyse interactions between fire and vegetation dynamics as well as to allude to the reasons behind changing fire regimes. Especially, dynamic links between vegetation, climate and fire processes are required to analyse dynamic feedbacks and effects of changes of single environmental factors. This led us to the point, where new fire models had to be developed that would allow the investigations, mentioned above, and could help to improve our understanding of the role of fire in global ecology. In conclusion of the thesis, one can state that moisture conditions, its persistence over time and fuel load are the important components that describe global fire pattern. If time series of a particular region are to be reproduced, specific ignition sources, fire-critical climate conditions and vegetation composition become additional determinants. Vegetation composition changes the level of fire occurrence and spread, but has limited impact on the inter-annual variability of fire. The importance to consider the full range of major fire processes and links to vegetation dynamics become apparent under climate change conditions. Increases in climate-dependent length of fire season does not automatically imply increases in biomass burnt, it can be buffered or accelerated by changes in vegetation productivity. Changes in vegetation composition as well as enhanced vegetation productivity can intensify changes in fire and lead to even more fire-related emissions. --- Anmerkung: Die Autorin ist Trägerin des von der Mathematisch-Naturwissenschaftlichen Fakultät der Universität Potsdam vergebenen Michelson-Preises für die beste Promotion des Jahres 2002/2003.
Today, the Mekong Delta in the southern of Vietnam is home for 18 million people. The delta also accounts for more than half of the country’s food production and 80% of the exported rice. Due to the low elevation, it is highly susceptible to the risk of fluvial and coastal flooding. Although extreme floods often result in excessive damages and economic losses, the annual flood pulse from the Mekong is vital to sustain agricultural cultivation and livelihoods of million delta inhabitants.
Delta-wise risk management and adaptation strategies are required to mitigate the adverse impacts from extreme events while capitalising benefits from floods. However, a proper flood risk management has not been implemented in the VMD, because the quantification of flood damage is often overlooked and the risks are thus not quantified. So far, flood management has been exclusively focused on engineering measures, i.e. high- and low- dyke systems, aiming at flood-free or partial inundation control without any consideration of the actual risks or a cost-benefit analysis. Therefore, an analysis of future delta flood dynamics driven these stressors is valuable to facilitate the transition from sole hazard control towards a risk management approach, which is more cost-effective and also robust against future changes in risk.
Built on these research gaps, this thesis investigates the current state and future projections of flood hazard, damage and risk to rice cultivation, the most important economic activity in the VMD. The study quantifies the changes in risk and hazard brought by the development of delta-based flood control measures in the last decades, and analyses the expected changes in risk driven by the changing climate, rising sea-level and deltaic land subsidence, and finally the development of hydropower projects in the Mekong Basin. For this purpose, flood trend analyses and comprehensive hydraulic modelling were performed, together with the development of a concept to quantify flood damage and risk to rice plantation.
The analysis of observed flood levels revealed strong and robust increasing trends of peak and duration downstream of the high-dyke areas with a step change in 2000/2001, i.e. after the disastrous flood which initiated the high-dyke development. These changes were in contrast to the negative trends detected upstream, suggested that high-dyke development has shifted flood hazard downstream. Findings of the trend’s analysis were later confirmed by hydraulic simulations of the two recent extreme floods in 2000 and 2011, where the hydrological boundaries and dyke system settings were interchanged.
However, the high-dyke system was not the only and often not the main cause for a shift of flood hazard, as a comparative analysis of these two extreme floods proved. The high-dyke development was responsible for 20–90% of the observed changes in flood level between 2000 and 2011, with large spatial variances. The particular flood hydrograph of the two events had the highest contribution in the northern part of the delta, while the tidal level had 2–3 times higher influence than the high-dyke in the lower-central and coastal areas downstream of high-dyke areas. The impact of the high-dyke development was highest in the areas closely downstream of the high-dyke area just south of the Cambodia-Vietnam border. The hydraulic simulations also validated that the concurrence of the flood peak with spring tides, i.e. high sea level along the coast, amplified the flood level and inundation in the central and coastal regions substantially.
The risk assessment quantified the economic losses of rice cultivation to USD 25.0 and 115 million (0.02–0.1% of the total GDP of Vietnam in 2011) corresponding to the 10-year and the 100-year floods, with an expected annual damage of about USD 4.5 million. A particular finding is that the flood damage was highly sensitive to flood timing. Here, a 10-year event with an early peak, i.e. late August-September, could cause as much damage as a 100-year event that peaked in October. This finding underlines the importance of a reliable early flood warning, which could substantially reduce the damage to rice crops and thus the risk.
The developed risk assessment concept was furthermore applied to investigate two high-dyke development alternatives, which are currently under discussion among the administrative bodies in Vietnam, but also in the public. The first option favouring the utilization of the current high-dyke compartments as flood retention areas instead for rice cropping during the flood season could reduce flood hazard and expected losses by 5–40%, depending on the region of the delta. On the contrary, the second option promoting the further extension of the areas protected by high-dyke to facilitate third rice crop planting on a larger area, tripled the current expected annual flood damage. This finding challenges the expected economic benefit of triple rice cultivation, in addition to the already known reducing of nutrient supply by floodplain sedimentation and thus higher costs for fertilizers.
The economic benefits of the high-dyke and triple rice cropping system is further challenged by the changes in the flood dynamics to be expected in future. For the middle of the 21st century (2036-2065) the effective sea-level rise an increase of the inundation extent by 20–27% was projected. This corresponds to an increase of flood damage to rice crops in dry, normal and wet year by USD 26.0, 40.0 and 82.0 million in dry, normal and wet year compared to the baseline period 1971-2000.
Hydraulic simulations indicated that the planned massive development of hydropower dams in the Mekong Basin could potentially compensate the increase in flood hazard and agriculture losses stemming from climate change. However, the benefits of dams as mitigation of flood losses are highly uncertain, because a) the actual development of the dams is highly disputed, b) the operation of the dams is primarily targeted at power generation, not flood control, and c) this would require international agreements and cooperation, which is difficult to achieve in South-East Asia. The theoretical flood mitigation benefit is additionally challenged by a number of negative impacts of the dam development, e.g. disruption of floodplain inundation in normal, non-extreme flood years. Adding to the certain reduction of sediment and nutrient load to the floodplains, hydropower dams will drastically impair rice and agriculture production, the basis livelihoods of million delta inhabitants.
In conclusion, the VMD is expected to face increasing threats of tidal induced floods in the coming decades. Protection of the entire delta coastline solely with “hard” engineering flood protection structures is neither technically nor economically feasible, adaptation and mitigation actions are urgently required. Better control and reduction of groundwater abstraction is thus strongly recommended as an immediate and high priority action to reduce the land subsidence and thus tidal flooding and salinity intrusion in the delta. Hydropower development in the Mekong basin might offer some theoretical flood protection for the Mekong delta, but due to uncertainties in the operation of the dams and a number of negative effects, the dam development cannot be recommended as a strategy for flood management. For the Vietnamese authorities, it is advisable to properly maintain the existing flood protection structures and to develop flexible risk-based flood management plans. In this context the study showed that the high-dyke compartments can be utilized for emergency flood management in extreme events. For this purpose, a reliable flood forecast is essential, and the action plan should be materialised in official documents and legislation to assure commitment and consistency in the implementation and operation.
Flood hazard estimations are conducted with a variety of methods. These include flood frequency analysis (FFA), hydrologic and hydraulic modelling, probable maximum discharges as well as climate scenarios. However, most of these methods assume stationarity of the used time series, i.e., the series must not exhibit trends. Against the background of climate change and proven significant trends in atmospheric circulation patterns, it is questionable whether these changes are also reflected in the discharge data. The aim of this PhD thesis is therefore to clarify, in a spatially-explicit manner, whether the available discharge data derived from selected German catchments exhibit trends. Concerning the flood hazard, the suitability of the currently used stationary FFA approaches is evaluated for the discharge data. Moreover, dynamics in atmospheric circulation patterns are studied and the link between trends in these patterns and discharges is investigated. To tackle this research topic, a number of different analyses are conducted. The first part of the PhD thesis comprises the study and trend test of 145 discharge series from catchments, which cover most of Germany for the period 1951–2002. The seasonality and trend pattern of eight flood indicators, such as maximum series and peak-over-threshold series, are analyzed in a spatially-explicit manner. Analyses are performed on different spatial scales: at the local scale, through gauge-specific analyses, and on the catchment-wide and basin scales. Besides the analysis of discharge series, data on atmospheric circulation patterns (CP) are an important source of information, upon which conclusions about the flood hazard can be drawn. The analyses of these circulation patterns (after Hess und Brezowsky) and the study of the link to peak discharges form the second part of the thesis. For this, daily data on the dominant CP across Europe are studied; these are represented by different indicators, which are tested for trend. Moreover, analyses are performed to extract flood triggering circulation patterns and to estimate the flood potential of CPs. Correlations between discharge series and CP indicators are calculated to assess a possible link between them. For this research topic, data from 122 meso-scale catchments in the period 1951–2002 are used. In a third part, the Mulde catchment, a mesoscale sub-catchment of the Elbe basin, is studied in more detail. Fifteen discharge series of different lengths in the period 1910–2002 are available for the seasonally differentiated analysis of the flood potential of CPs and flood influencing landscape parameters. For trend tests of discharge and CP data, different methods are used. The Mann-Kendall test is applied with a significance level of 10%, ensuring statistically sound results. Besides the test of the entire series for trend, multiple time-varying trend tests are performed with the help of a resampling approach in order to better differentiate short-term fluctuations from long-lasting trends. Calculations of the field significance complement the flood hazard assessment for the studied regions. The present thesis shows that the flood hazard is indeed significantly increasing for selected regions in Germany during the winter season. Especially affected are the middle mountain ranges in Central Germany. This increase of the flood hazard is attributed to a longer persistence of selected CPs during winter. Increasing trends in summer floods are found in the Rhine and Danube catchments, decreasing trends in the Elbe and Weser catchments. Finally, a significant trend towards a reduced diversity of CPs is found causing fewer patterns with longer persistence to dominate the weather over Europe. The detailed study of the Mulde catchment reveals a flood regime with frequent low winter floods and fewer summer floods, which bear, however, the potential of becoming extreme. Based on the results, the use of instationary approaches for flood hazard estimation is recommended in order to account for the detected trends in many of the series. Through this methodology it is possible to directly consider temporal changes in flood series, which in turn reduces the possibility of large under- or overestimations of the extreme discharges, respectively.
Peak oil is forcing our society to shift from fossil to renewable resources. However, such renewable resources are also scarce, and they too must be used in the most efficient and sustainable way possible. Biorefining is a concept that represents both resource efficiency and sustainability. This approach initiates a cascade use, which means food and feed production before material use, and an energy-related use at the end of the value-added chain. However, sustainability should already start in the fields, on the agricultural side, where the industrially-used biomass is produced. Therefore, the aim of my doctoral thesis is to analyse the sustainable feedstock supply for biorefineries. In contrast to most studies on biorefineries, I focus on the sustainable provision of feedstock and not on the bioengineering processing of whatever feedstock is available.
Grasslands provide a high biomass potential. They are often inefficiently used, so a new utilisation concept based on the biorefining approach can increase the added value from grasslands. Fodder legumes from temporary and permanent grasslands were chosen for this study. Previous research shows that they are a promising feedstock for industrial uses, and their positive environmental impact is an important byproduct to promote sustainable agricultural production systems.
Green Biorefineries are a class of biorefineries that use fresh green biomass, such as grasses or fodder legumes, as feedstock. After fractionation, an organic solution (press juice) forms; this is used for the production of organic acids, chemicals and extracts, as well as fertilisers. A fibre component (press cake) is also created to produce feed, biomaterials and biogas. This thesis examines a specific value chain, using alfalfa and clover/grass as feedstock and generating lactic acid and one type of cattle feed from it. The research question is if biomass production needs to be adapted for the utilisation of fodder legumes in the Green Biorefinery approach. I have attempted to give a holistic analysis of cultivation, processing and utilisation of two specific grassland crops. Field trials with alfalfa and clover/grass at different study sites were carried out to obtain information on biomass quality and quantity depending on the crop, study site and harvest time. The fresh biomass was fractionated with a screw press and the composition of press juices and cakes was analysed. Fermentation experiments took place to determine the usability of press juices for lactic acid production. The harvest time is not of high importance for the quality of press juices as a fermentation medium. For permanent grasslands, late cuts, often needed for reasons of nature conservation, are possible without a major influence on feedstock quality. The press cakes were silaged for feed-value determination.
Following evidence that both intermediate products are suitable feedstocks in the Green Biorefinery approach, I developed a cost-benefit analysis, comparing different production scenarios on a farm. Two standard crop rotations for Brandenburg, producing either only market crops or market crops and fodder legumes for ruminant feed production, were compared to a system that uses the cultivated fodder legumes for the Green Biorefinery value chain instead of only feed production. Timely processing of the raw material is important to maintain quality for industrial uses, so on-site processing at the farm is assumed in Green Biorefinery scenario. As a result, more added value stays in the rural area. Two farm sizes, common for many European regions, were chosen to examine the influence of scale. The cost site of farmers has also been analysed in detail to assess which farm characteristics make production of press juices for biochemical industries viable. Results show that for large farm sizes in particular, the potential profits are high. Additionally, the wider spectrum of marketable products generates new sources of income for farmers.
The holistic analysis of the supply chain provides evidence that the cultivation processes for fodder legumes do not need to be adapted for use in Green Biorefineries. In fact, the new utilisation approach even widens the cultivation and processing spectrum and can increase economic viability of fodder legume production in conventional farming.
Anthropogenic activities have transformed the Earth's environment, not only on local level, but on the planetary-scale causing global change. Besides industrialization, agriculture is a major driver of global change. This change in turn impairs the agriculture sector, reducing crop yields namely due to soil degradation, water scarcity, and climate change. However, this is a more complex issue than it appears. Crop yields can be increased by use of agrochemicals and fertilizers which are mainly produced by fossil energy. This is important to meet the increasing food demand driven by global demographic change, which is further accelerated by changes in regional lifestyles. In this dissertation, we attempt to address this complex problem exploring agricultural potential globally but on a local scale. For this, we considered the influence of lifestyle changes (dietary patterns) as well as technological progress and their effects on climate change, mainly greenhouse gas (GHG) emissions. Furthermore, we examined options for optimizing crop yields in the current cultivated land with the current cropping patterns by closing yield gaps. Using this, we investigated in a five-minute resolution the extent to which food demand can be met locally, and/or by regional and/or global trade. Globally, food consumption habits are shifting towards calorie rich diets. Due to dietary shifts combined with population growth, the global food demand is expected to increase by 60-110% between 2005 and 2050. Hence, one of the challenges to global sustainability is to meet the growing food demand, while at the same time, reducing agricultural inputs and environmental consequences. In order to address the above problem, we used several freely available datasets and applied multiple interconnected analytical approaches that include artificial neural network, scenario analysis, data aggregation and harmonization, downscaling algorithm, and cross-scale analysis.
Globally, we identified sixteen dietary patterns between 1961 and 2007 with food intakes ranging from 1,870 to 3,400 kcal/cap/day. These dietary patterns also reflected changing dietary habits to meat rich diets worldwide. Due to the large share of animal products, very high calorie diets that are common in the developed world, exhibit high total per capita emissions of 3.7-6.1 kg CO2eq./day. This is higher than total per capita emissions of 1.4-4.5 kg CO2eq./day associated with low and moderate calorie diets that are common in developing countries. Currently, 40% of the global crop calories are fed to livestock and the feed calorie use is four times the produced animal calories. However, these values vary from less than 1 kcal to greater 10 kcal around the world. On the local and national scale, we found that the local and national food production could meet demand of 1.9 and 4.4 billion people in 2000, respectively. However, 1 billion people from Asia and Africa require intercontinental agricultural trade to meet their food demand. Nevertheless, these regions can become food self-sufficient by closing yield gaps that require location specific inputs and agricultural management strategies. Such strategies include: fertilizers, pesticides, soil and land improvement, management targeted on mitigating climate induced yield variability, and improving market accessibility. However, closing yield gaps in particular requires global N-fertilizer application to increase by 45-73%, P2O5 by 22-46%, and K2O by 2-3 times compare to 2010. Considering population growth, we found that the global agricultural GHG emissions will approach 7 Gt CO2eq./yr by 2050, while the global livestock feed demand will remain similar to 2000. This changes tremendously when diet shifts are also taken into account, resulting in GHG emissions of 20 Gt CO2eq./yr and an increase of 1.3 times in the crop-based feed demand between 2000 and 2050. However, when population growth, diet shifts, and technological progress by 2050 were considered, GHG emissions can be reduced to 14 Gt CO2eq./yr and the feed demand to nearly 1.8 times compare to that in 2000. Additionally, our findings shows that based on the progress made in closing yield gaps, the number of people depending on international trade can vary between 1.5 and 6 billion by 2050. In medium term, this requires additional fossil energy. Furthermore, climate change, affecting crop yields, will increase the need for international agricultural trade by 4% to 16%.
In summary, three general conclusions are drawn from this dissertation. First, changing dietary patterns will significantly increase crop demand, agricultural GHG emissions, and international food trade in the future when compared to population growth only. Second, such increments can be reduced by technology transfer and technological progress that will enhance crop yields, decrease agricultural emission intensities, and increase livestock feed conversion efficiencies. Moreover, international trade dependency can be lowered by consuming local and regional food products, by producing diverse types of food, and by closing yield gaps. Third, location specific inputs and management options are required to close yield gaps. Sustainability of such inputs and management largely depends on which options are chosen and how they are implemented. However, while every cultivated land may not need to attain its potential yields to enable food security, closing yield gaps only may not be enough to achieve food self-sufficiency in some regions. Hence, a combination of sustainable implementations of agricultural intensification, expansion, and trade as well as shifting dietary habits towards a lower share of animal products is required to feed the growing population.
For millennia, humans have affected landscapes all over the world. Due to horizontal expansion, agriculture plays a major role in the process of fragmentation. This process is caused by a substitution of natural habitats by agricultural land leading to agricultural landscapes. These landscapes are characterized by an alternation of agriculture and other land use like forests. In addition, there are landscape elements of natural origin like small water bodies. Areas of different land use are beside each other like patches, or fragments. They are physically distinguishable which makes them look like a patchwork from an aerial perspective. These fragments are each an own ecosystem with conditions and properties that differ from their adjacent fragments. As open systems, they are in exchange of information, matter and energy across their boundaries. These boundary areas are called transition zones. Here, the habitat properties and environmental conditions are altered compared to the interior of the fragments. This changes the abundance and the composition of species in the transition zones, which in turn has a feedback effect on the environmental conditions.
The literature mainly offers information and insights on species abundance and composition in forested transition zones. Abiotic effects, the gradual changes in energy and matter, received less attention. In addition, little is known about non-forested transition zones. For example, the effects on agricultural yield in transition zones of an altered microclimate, matter dynamics or different light regimes are hardly researched or understood. The processes in transition zones are closely connected with altered provisioning and regulating ecosystem services. To disentangle the mechanisms and to upscale the effects, models can be used.
My thesis provides insights into these topics: literature was reviewed and a conceptual framework for the quantitative description of gradients of matter and energy in transition zones was introduced. The results of measurements of environmental gradients like microclimate, aboveground biomass and soil carbon and nitrogen content are presented that span from within the forest into arable land. Both the measurements and the literature review could not validate a transition zone of 100 m for abiotic effects. Although this value is often reported and used in the literature, it is likely to be smaller.
Further, the measurements suggest that on the one hand trees in transition zones are smaller compared to those in the interior of the fragments, while on the other hand less biomass was measured in the arable lands’ transition zone. These results support the hypothesis that less carbon is stored in the aboveground biomass in transition zones. The soil at the edge (zero line) between adjacent forest and arable land contains more nitrogen and carbon content compared to the interior of the fragments. One-year measurements in the transition zone also provided evidence that microclimate is different compared to the fragments’ interior.
To predict the possible yield decreases that transition zones might cause, a modelling approach was developed. Using a small virtual landscape, I modelled the effect of a forest fragment shading the adjacent arable land and the effects of this on yield using the MONICA crop growth model. In the transition zone yield was less compared to the interior due to shading. The results of the simulations were upscaled to the landscape level and exemplarily calculated for the arable land of a whole region in Brandenburg, Germany.
The major findings of my thesis are: (1) Transition zones are likely to be much smaller than assumed in the scientific literature; (2) transition zones aren’t solely a phenomenon of forested ecosystems, but significantly extend into arable land as well; (3) empirical and modelling results show that transition zones encompass biotic and abiotic changes that are likely to be important to a variety of agricultural landscape ecosystem services.
Bilingualer Unterricht gilt als das Erfolgsmodell für den schulischen Fremdsprachenerwerb in Deutschland und die Beherrschung einer Fremdsprache in Wort und Schrift ist eine entscheidende berufsqualifizierende Kompetenz in unserer globalisierten Welt. Insbesondere die Verzahnung fachlicher und sprachlicher Inhalte im Kontext Bilingualen Unterrichts scheint gewinnbringend für den Fremdspracherwerb zu sein. Dabei ist die Diskrepanz zwischen den zumeist noch geringen fremdsprachlichen Fähigkeiten der Lernenden und den fachlichen Ansprüchen des Geographieunterrichts eine große Herausforderung für fachliches Lernen im bilingualen Sachfachunterricht. Es stellt sich die Frage, wie der Bilinguale Unterricht gestaltet sein muss, um einerseits geographische Themen fachlich komplex behandeln zu können und andererseits die Lernenden fremdsprachlich nicht zu überfordern.
Im Rahmen einer Design-Based-Research-Studie im bilingualen Geographieunterricht wurde untersucht, wie fachliches Lernen im bilingualen Geographieunterricht durch den Einsatz beider beteiligter Sprachen (Englisch/Deutsch) gefördert werden kann.
Auf Grundlage eines theoretisch fundierten Kenntnisstands zum Bilingualen Unterricht und zum Lernen mit Fachkonzepten im Geographieunterricht wurde eine Lernumgebung konzipiert, im Unterricht erprobt und weiterentwickelt, in der Strategien des Sprachwechsels zum Einsatz kommen.
Die Ergebnisse der Studie sind kontextbezogene Theorien einer zweisprachigen Didaktik für den bilingualen Geographieunterricht und Erkenntnisse zum Lernen mit Fachkonzepten im Geographieunterricht am Beispiel des geographischen Konzepts Wandel. Produkt der Studie ist eine unterrichtstaugliche Lernumgebung zum Thema Wandlungsprozesse an ausgewählten Orten für den bilingualen Geographieunterricht mit didaktischem Konzept, Unterrichtsmaterialien und -medien.
This thesis presents methods, techniques and tools for developing three-dimensional representations of tactical intelligence assessments. Techniques from GIScience are combined with crime mapping methods. The range of methods applied in this study provides spatio-temporal GIS analysis as well as 3D geovisualisation and GIS programming. The work presents methods to enhance digital three-dimensional city models with application specific thematic information. This information facilitates further geovisual analysis, for instance, estimations of urban risks exposure. Specific methods and workflows are developed to facilitate the integration of spatio-temporal crime scene analysis results into 3D tactical intelligence assessments. Analysis comprises hotspot identification with kernel-density-estimation techniques (KDE), LISA-based verification of KDE hotspots as well as geospatial hotspot area characterisation and repeat victimisation analysis. To visualise the findings of such extensive geospatial analysis, three-dimensional geovirtual environments are created. Workflows are developed to integrate analysis results into these environments and to combine them with additional geospatial data. The resulting 3D visualisations allow for an efficient communication of complex findings of geospatial crime scene analysis.
Global heat adaptation among urban populations and its evolution under different climate futures
(2022)
Heat and increasing ambient temperatures under climate change represent a serious threat to human health in cities. Heat exposure has been studied extensively at a global scale. Studies comparing a defined temperature threshold with the future daytime temperature during a certain period of time, had concluded an increase in threat to human health. Such findings however do not explicitly account for possible changes in future human heat adaptation and might even overestimate heat exposure. Thus, heat adaptation and its development is still unclear. Human heat adaptation refers to the local temperature to which populations are adjusted to. It can be inferred from the lowest point of the U- or V-shaped heat-mortality relationship (HMR), the Minimum Mortality Temperature (MMT). While epidemiological studies inform on the MMT at the city scale for case studies, a general model applicable at the global scale to infer on temporal change in MMTs had not yet been realised. The conventional approach depends on data availability, their robustness, and on the access to daily mortality records at the city scale. Thorough analysis however must account for future changes in the MMT as heat adaptation happens partially passively. Human heat adaptation consists of two aspects: (1) the intensity of the heat hazard that is still tolerated by human populations, meaning the heat burden they can bear and (2) the wealth-induced technological, social and behavioural measures that can be employed to avoid heat exposure. The objective of this thesis is to investigate and quantify human heat adaptation among urban populations at a global scale under the current climate and to project future adaptation under climate change until the end of the century. To date, this has not yet been accomplished. The evaluation of global heat adaptation among urban populations and its evolution under climate change comprises three levels of analysis. First, using the example of Germany, the MMT is calculated at the city level by applying the conventional method. Second, this thesis compiles a data pool of 400 urban MMTs to develop and train a new model capable of estimating MMTs on the basis of physical and socio-economic city characteristics using multivariate non-linear multivariate regression. The MMT is successfully described as a function of the current climate, the topography and the socio-economic standard, independently of daily mortality data for cities around the world. The city-specific MMT estimates represents a measure of human heat adaptation among the urban population. In a final third analysis, the model to derive human heat adaptation was adjusted to be driven by projected climate and socio-economic variables for the future. This allowed for estimation of the MMT and its change for 3 820 cities worldwide for different combinations of climate trajectories and socio-economic pathways until 2100. The knowledge on the evolution of heat adaptation in the future is a novelty as mostly heat exposure and its future development had been researched. In this work, changes in heat adaptation and exposure were analysed jointly. A wide range of possible health-related outcomes up to 2100 was the result, of which two scenarios with the highest socio-economic developments but opposing strong warming levels were highlighted for comparison. Strong economic growth based upon fossil fuel exploitation is associated with a high gain in heat adaptation, but may not be able to compensate for the associated negative health effects due to increased heat exposure in 30% to 40% of the cities investigated caused by severe climate change. A slightly less strong, but sustainable growth brings moderate gains in heat adaptation but a lower heat exposure and exposure reductions in 80% to 84% of the cities in terms of frequency (number of days exceeding the MMT) and intensity (magnitude of the MMT exceedance) due to a milder global warming. Choosing a 2 ° C compatible development by 2100 would therefore lower the risk of heat-related mortality at the end of the century. In summary, this thesis makes diverse and multidisciplinary contributions to a deeper understanding of human adaptation to heat under the current and the future climate. It is one of the first studies to carry out a systematic and statistical analysis of urban characteristics which are useful as MMT drivers to establish a generalised model of human heat adaptation, applicable at the global level. A broad range of possible heat-related health options for various future scenarios was shown for the first time. This work is of relevance for the assessment of heat-health impacts in regions where mortality data are not accessible or missing. The results are useful for health care planning at the meso- and macro-level and to urban- and climate change adaptation planning. Lastly, beyond having met the posed objective, this thesis advances research towards a global future impact assessment of heat on human health by providing an alternative method of MMT estimation, that is spatially and temporally flexible in its application.
Studies on the unsustainable use of groundwater resources are still considered incipient since it is frequently a poorly understood and managed, devalued and inadequately protected natural resource. Groundwater Recharge (GWR) is one of the most challenging elements to estimate since it can rarely be measured directly and cannot easily be derived from existing data. To overcome these limitations, many hydro(geo)logists have combined different approaches to estimate large-scale GWR, namely: remote sensing products, such as IMERG product; Water Budget Equation, also in combination with hydrological models, and; Geographic Information System (GIS), using estimation formulas. For intermediary-scale GWR estimation, there exist: Non-invasive Cosmic-Ray Neutron Sensing (CRNS); wireless networks from local soil probes; and soil hydrological models, such as HYDRUS. Accordingly, this PhD thesis aims, on the one hand, to demonstrate a GIS-based model coupling for estimating the GWR distribution on a large scale in tropical wet basins. On the other hand, it aims to use the time series from CRNS and invasive soil moisture probes to inversely calibrate the soil hydraulic properties, and based on this, estimating the intermediary-scale GWR using a soil hydrological model. For such purpose, two tropical wet basins located in a complex sedimentary aquifer in the coastal Northeast region of Brazil were selected. These are the João Pessoa Case Study Area and the Guaraíra Experimental Basin. Several satellite products in the first area were used as input to the GIS-based water budget equation model for estimating the water balance components and GWR in 2016 and 2017. In addition, the point-scale measurement and CRNS data were used in the second area to determine the soil hydraulic properties, and to estimate the GWR in the 2017-2018 and 2018-2019 hydrological years. The resulting values of GWR on large- and intermediary-scale were then compared and validated by the estimates obtained by groundwater table fluctuations. The GWR rates for IMERG- and rain-gauge-based scenarios showed similar coefficients between 68% and 89%, similar mean errors between 30% and 34%, and slightly-different bias between -13% and 11%. The results of GWR rates for soil probes and CRNS soil moisture scenarios ranged from -5.87 to -61.81 cm yr-1, which corresponds to 5% and 38% of the precipitation. The calculations of the mean GWR rates on large-scale, based on remote sensing data, and on intermediary-scale, based on CRNS data, held similar results for the Podzol soil type, namely 17.87% and 17% of the precipitation. It is then concluded that the proposed methodologies allowed for estimating realistically the GWR over the study areas, which can be a ground-breaking step towards improving the water management and decision-making in the Northeast of Brazil.
Water resources from Central Asia’s mountain regions have a high relevance for the water supply of the water scarce lowlands. A good understanding of the water cycle in these mountain regions is therefore needed to develop water management strategies. Hydrological modeling helps to improve our knowledge of the regional water cycle, and it can be used to gain a better understanding of past changes or estimate future hydrologic changes in view of projected changes in climate. However, due to the scarcity of hydrometeorological data, hydrological modeling for mountain regions in Central Asia involves large uncertainties.
Addressing this problem, the first aim of this thesis was to develop hydrological modeling approaches that can increase the credibility of hydrological models in data sparse mountain regions. This was achieved by using additional data from remote sensing and atmospheric modeling. It was investigated whether spatial patterns from downscaled reanalysis data can be used for the interpolation of station-based precipitation data. This approach was compared to other precipitation estimates using a hydrologic evaluation based on hydrological modeling and a comparison of simulated and observed discharge, which demonstrated a generally good performance of this method. The study further investigated the value of satellite-derived snow cover data for model calibration. Trade-offs of good model performance in terms of discharge and snow cover were explicitly evaluated using a multiobjective optimization algorithm, and the results were contrasted with single-objective calibration and Monte Carlo simulations. The study clearly shows that the additional use of snow cover data improved the internal consistency of the hydrological model. In this context, it was further investigated for the first time how many snow cover scenes were required for hydrological model calibration.
The second aim of this thesis was the application of the hydrological model in order to investigate the causes of observed streamflow increases in two headwater catchments of the Tarim River over the recent decades. This simulation-based approach for trend attribution was complemented by a data-based approach. The hydrological model was calibrated to discharge and glacier mass balance data and considered changes in glacier geometry over time. The results show that in the catchment with a lower glacierization, increasing precipitation and temperature both contributed to the streamflow increases, while in the catchment with a stronger glacierization, increasing temperatures were identified as the dominant driver.
Understanding hydrological processes is of fundamental importance for the Vietnamese national food security and the livelihood of the population in the Vietnamese Mekong Delta (VMD). As a consequence of sparse data in this region, however, hydrologic processes, such as the controlling processes of precipitation, the interaction between surface and groundwater, and groundwater dynamics, have not been thoroughly studied. The lack of this knowledge may negatively impact the long-term strategic planning for sustainable groundwater resources management and may result in insufficient groundwater recharge and freshwater scarcity. It is essential to develop useful methods for a better understanding of hydrological processes in such data-sparse regions. The goal of this dissertation is to advance methodologies that can improve the understanding of fundamental hydrological processes in the VMD, based on the analyses of stable water isotopes and monitoring data. The thesis mainly focuses on the controlling processes of precipitation, the mechanism of surface–groundwater interaction, and the groundwater dynamics. These processes have not been fully addressed in the VMD so far. The thesis is based on statistical analyses of the isotopic data of Global Network of Isotopes in Precipitation (GNIP), of meteorological and hydrological data from Vietnamese agencies, and of the stable water isotopes and monitoring data collected as part of this work.
First, the controlling processes of precipitation were quantified by the combination of trajectory analysis, multi-factor linear regression, and relative importance analysis (hereafter, a model‐based statistical approach). The validity of this approach is confirmed by similar, but mainly qualitative results obtained in other studies. The total variation in precipitation isotopes (δ18O and δ2H) can be better explained by multiple linear regression (up to 80%) than single-factor linear regression (30%). The relative importance analysis indicates that atmospheric moisture regimes control precipitation isotopes rather than local climatic conditions. The most crucial factor is the upstream rainfall along the trajectories of air mass movement. However, the influences of regional and local climatic factors vary in importance over the seasons. The developed model‐based statistical approach is a robust tool for the interpretation of precipitation isotopes and could also be applied to understand the controlling processes of precipitation in other regions.
Second, the concept of the two-component lumped-parameter model (LPM) in conjunction with stable water isotopes was applied to examine the surface–groundwater interaction in the VMD. A calibration framework was also set up to evaluate the behaviour, parameter identifiability, and uncertainties of two-component LPMs. The modelling results provided insights on the subsurface flow conditions, the recharge contributions, and the spatial variation of groundwater transit time. The subsurface flow conditions at the study site can be best represented by the linear-piston flow distribution. The contributions of the recharge sources change with distance to the river. The mean transit time (mTT) of riverbank infiltration increases with the length of the horizontal flow path and the decreasing gradient between river and groundwater. River water infiltrates horizontally mainly via the highly permeable aquifer, resulting in short mTTs (<40 weeks) for locations close to the river (<200 m). The vertical infiltration from precipitation takes place primarily via a low‐permeable overlying aquitard, resulting in considerably longer mTTs (>80 weeks). Notably, the transit time of precipitation infiltration is independent of the distance to the river. All these results are hydrologically plausible and could be quantified by the presented method for the first time. This study indicates that the highly complex mechanism of surface–groundwater interaction at riverbank infiltration systems can be conceptualized by exploiting two‐component LPMs. It is illustrated that the model concept can be used as a tool to investigate the hydrological functioning of mixing processes and the flow path of multiple water components in riverbank infiltration systems.
Lastly, a suite of time series analysis approaches was applied to examine the groundwater dynamics in the VMD. The assessment was focused on the time-variant trends of groundwater levels (GWLs), the groundwater memory effect (representing the time that an aquifer holds water), and the hydraulic response between surface water and multi-layer alluvial aquifers. The analysis indicates that the aquifers act as low-pass filters to reduce the high‐frequency signals in the GWL variations, and limit the recharge to the deep groundwater. The groundwater abstraction has exceeded groundwater recharge between 1997 and 2017, leading to the decline of groundwater levels (0.01-0.55 m/year) in all considered aquifers in the VMD. The memory effect varies according to the geographical location, being shorter in shallow aquifers and flood-prone areas and longer in deep aquifers and coastal regions. Groundwater depth, season, and location primarily control the variation of the response time between the river and alluvial aquifers. These findings are important contributions to the hydrogeological literature of a little-known groundwater system in an alluvial setting. It is suggested that time series analysis can be used as an efficient tool to understand groundwater systems where resources are insufficient to develop a physical-based groundwater model.
This doctoral thesis demonstrates that important aspects of hydrological processes can be understood by statistical analysis of stable water isotope and monitoring data. The approaches developed in this thesis can be easily transferred to regions in similar tropical environments, particularly those in alluvial settings. The results of the thesis can be used as a baseline for future isotope-based studies and contribute to the hydrogeological literature of little-known groundwater systems in the VMD.
Streamflow dynamics in mountainous environments are controlled by runoff generation processes in the basin upstream. Runoff generation processes are thus a major control of the terrestrial part of the water cycle, influencing both, water quality and water quantity as well as their dynamics. The understanding of these processes becomes especially important for the prediction of floods, erosion, and dangerous mass movements, in particular as hydrological systems often show threshold behavior. In case of extensive environmental changes, be it in climate or in landuse, the understanding of runoff generation processes will allow us to better anticipate the consequences and can thus lead to a more responsible management of resources as well as risks. In this study the runoff generation processes in a small undisturbed catchment in the Chilean Andes were investigated. The research area is characterized by steep hillslopes, volcanic ash soils, undisturbed old growth forest and high rainfall amounts. The investigation of runoff generation processes in this data scarce area is of special interest as a) little is known on the hydrological functioning of the young volcanic ash soils, which are characterized by extremely high porosities and hydraulic conductivities, b) no process studies have been carried out in this area at either slope or catchment scale, and c) understanding the hydrological processes in undisturbed catchments will provide a basis to improve our understanding of disturbed systems, the shift in processes that followed the disturbance and maybe also future process evolution necessary for the achievement of a new steady state. The here studied catchment has thus the potential to serve as a reference catchment for future investigations. As no long term data of rainfall and runoff exists, it was necessary to replace long time series of data with a multitude of experimental methods, using the so called "multi-method approach". These methods cover as many aspects of runoff generation as possible and include not only the measurement of time series such as discharge, rainfall, soil water dynamics and groundwater dynamics, but also various short term measurements and experiments such as determination of throughfall amounts and variability, water chemistry, soil physical parameters, soil mineralogy, geo-electrical soundings and tracer techniques. Assembling the results like pieces of a puzzle produces a maybe not complete but nevertheless useful picture of the dynamic ensemble of runoff generation processes in this catchment. The employed methods were then evaluated for their usefulness vs. expenditures (labour and financial costs). Finally, the hypotheses - the perceptual model of runoff generation generated from the experimental findings - were tested with the physically based model Catflow. Additionally the process-based model Wasim-ETH was used to investigate the influence of landuse on runoff generation at the catchment scale. An initial assessment of hydrologic response of the catchment was achieved with a linear statistical model for the prediction of event runoff coefficients. The parameters identified as best predictors give a first indication of important processes. Various results acquired with the "multi-method approach" show that response to rainfall is generally fast. Preferential vertical flow is of major importance and is reinforced by hydrophobicity during the summer months. Rapid lateral water transport is necessary to produce the fast response signal, however, while lateral subsurface flow was observed at several soil moisture profiles, the location and type of structures causing fast lateral flow on the hillslope scale is still not clear and needs to be investigated in more detail. Surface runoff has not been observed and is unlikely due to the high hydraulic conductivities of the volcanic ash soils. Additionally, a large subsurface storage retains most of the incident rainfall amount during events (>90%, often even >95%) and produces streamflow even after several weeks of drought. Several findings suggest a shift in processes from summer to winter causing changes in flow patterns, changes in response of stream chemistry to rainfall events and also in groundwater-surface water interactions. The results of the modelling study confirm the importance of rapid and preferential flow processes. However, due to the limited knowledge on subsurface structures the model still does not fully capture runoff response. Investigating the importance of landuse on runoff generation showed that while peak runoff generally increased with deforested area, the location of these areas also had an effect. Overall, the "multi-method approach" of replacing long time series with a multitude of experimental methods was successful in the identification of dominant hydrological processes and thus proved its applicability for data scarce catchments under the constraint of limited resources.
The objective of this thesis is to improve the knowledge of control mechanisms of hydrological induced mass movements. To this end, detailed hydrological process studies and physically-based hydrological modelling were applied. The study site is a hillslope in the Dornbirn Ache valley near Bregenz, Austria. This so called Heumös slope features a deep-seated translational shear zone and surface near creep movements of up to 10 cm a year. The Cretaceous marlstones of the Austrian Helveticum have a high susceptibility for weathering and might form clay-rich cohesive sediments. In addition, glacial and post-glacial processes formed an unstable hillslope. High yearly precipitation depths of about 2100 mm and rainstorms with both high intensities and precipitation depths govern surface and subsurface hydrological processes. Pressure propagation induced in hydrological active areas influences laterally the groundwater reactions of the moving mass. A complex three-dimensional subsurface pressure system is the cause for fast groundwater reactions despite low hydraulic conductivities. To understand hillslope scale variability, hydrotopes representing specific dominating processes were mapped using vegetation association distribution and soil core analysis. Detailed small-scale soil investigations followed to refine the understanding of these hydrotopes. A perceptional model was developed from the hydrotope distribution and was corroborated by these detailed investigations. The moving hillslope is dominated by surface-runoff generation. Infiltration and deep percolation of water is inhibited through clay-rich gleysols; the yearly average soil moisture is close to saturation. Steep slopes adjacent to the moving hillslope are far more active concerning infiltration, preferential flow and groundwater fluctuations. Spring discharge observations at the toe of the steep slopes are in close relation to groundwater table observations on the moving hillslope body. Evidence of pressure propagation from the steep slopes towards the hillslope body is gathered by comparison of dominating structures and processes. The application of the physically-based hydrological model CATFLOW substantiates the idea of pressure propagation as a key process for groundwater reactions and as a possible trigger for movement in the hillslope.
Ignorance and Vulnerability : the 2002 mulde flood in the city of Eilenburg (Saxony, Germany)
(2008)
Bank filtration is an effective water treatment technique and is widely adopted in Europe along major rivers. It is the process where surface water penetrates the riverbed, flows through the aquifer, and then is extracted by near-bank production wells. By flowing in the subsurface flow passage, the water quality can be improved by a series of beneficial processes. Long-term riverbank filtration also produces colmation layers on the riverbed. The colmation layer may act as a bioactive zone that is governed by biochemical and physical processes owing to its enrichment of microbes and organic matter. Low permeability may strongly limit the surface water infiltration and further lead to a decreasing recoverable ratio of production wells.The removal of the colmation layer is therefore a trade-off between the treatment capacity and treatment efficiency. The goal of this Ph.D. thesis is to focus on the temporal and spatial change of the water quality and quantity along the flow path of a hydrogeological heterogeneous riverbank filtration site adjacent to an artificial-reconstructed (bottom excavation and bank reconstruction) canal in Potsdam, Germany.
To quantify the change of the infiltration rate, travel time distribution, and the thermal field brought by the canal reconstruction, a three-dimensional flow and heat transport model was created. This model has two scenarios, 1) ‘with’ canal reconstruction, and 2) ‘without’ canal reconstruction. Overall, the model calibration results of both water heads and temperatures matched those observed in the field study. In comparison to the model without reconstruction, the reconstruction model led to more water being infiltrated into the aquifer on that section, on average 521 m3/d, which corresponded to around 9% of the total pumping rate. Subsurface travel-time distribution substantially shifted towards shorter travel times. Flow paths with travel times <200 days increased by ~10% and those with <300 days by 15%. Furthermore, the thermal distribution in the aquifer showed that the seasonal variation in the scenario with reconstruction reaches deeper and laterally propagates further.
By scatter plotting of δ18O versus δ 2H, the infiltrated river water could be differentiated from water flowing in the deep aquifer, which may contain remnant landside groundwater from further north. In contrast, the increase of river water contribution due to decolmation could be shown by piper plot. Geological heterogeneity caused a substantial spatial difference in redox zonation among different flow paths, both horizontally and vertically. Using the Wilcoxon rank test, the reconstruction changed the redox potential differently in observation wells. However, taking the small absolute concentration level, the change is also relatively minor. The treatment efficiency for both organic matter and inorganic matter is consistent after the reconstruction, except for ammonium. The inconsistent results for ammonium could be explained by changes in the Cation Exchange Capacity (CEC) in the newly paved riverbed. Because the bed is new, it was not yet capable of keeping the newly produced ammonium by sorption and further led to the breakthrough of the ammonium plume. By estimation, the peak of the ammonium plume would reach the most distant observation well before February 2024, while the peaking concentration could be further dampened by sorption and diluted by the afterward low ammonium flow. The consistent DOC and SUVA level suggests that there was no clear preference for the organic matter removal along the flow path.
The scope of this study is to investigate the environmental change in the German part of the Elbe river basin, whereby the focus is on two water related problems: having too little water and having water of poor quality. The Elbe region is representative of humid to semi-humid landscapes in central Europe, where water availability during the summer season is the limiting factor for plant growth and crop yields, especially in the loess areas, where the annual precipitation is lower than 500 mm. It is most likely that water quantity problems will accelerate in future, because both the observed and the projected climate trend show an increase in temperature and a decrease in annual precipitation, especially in the summer. Another problem is nutrient pollution of rivers and lakes. In the early 1990s, the Elbe was one of the most heavily polluted rivers in Europe. Even though nutrient emissions from point sources have notably decreased in the basin due to reduction of industrial sources and introduction of new and improved sewage treatment facilities, the diffuse sources of pollution are still not sufficiently controlled. The investigations have been done using the eco-hydrological model SWIM (Soil and Water Integrated Model), which has been embedded in a model framework of climate and agro-economic models. A global scenario of climate and agro-economic change has been regionalized to generate transient climate forcing data and land use boundary conditions for the model. The model was used to transform the climate and land use changes into altered evapotranspiration, groundwater recharge, crop yields and river discharge, and to investigate the development of water quality in the river basin. Particular emphasis was given to assessing the significance of the impacts on the hydrology, taking into account in the analysis the inherent uncertainty of the regional climate change as well as the uncertainty in the results of the model. The average trend of the regional climate change scenario indicates a decrease in mean annual precipitation up to 2055 of about 1.5 %, but with high uncertainty (covering the range from -15.3 % to +14.8 %), and a less uncertain increase in temperature of approximately 1.4 K. The relatively small change in precipitation in conjunction with the change in temperature leads to severe impacts on groundwater recharge and river flow. Increasing temperature induces longer vegetation periods, and the seasonality of the flow regime changes towards longer low flow spells in summer. As a results the water availability will decrease on average of the scenario simulations by approximately 15 %. The increase in temperatures will improve the growth conditions for temperature limited crops like maize. The uncertainty of the climate trend is particularly high in regions where the change is the highest. The simulation results for the Nuthe subbasin of the Elbe indicate that retention processes in groundwater, wetlands and riparian zones have a high potential to reduce the nitrate concentrations of rivers and lakes in the basin, because they are located at the interface between catchment area and surface water bodies, where they are controlling the diffuse nutrient inputs. The relatively high retention of nitrate in the Nuthe basin is due to the long residence time of water in the subsurface (about 40 years), with good conditions for denitrification, and due to nitrate retention and plant uptake in wetlands and riparian zones. The concluding result of the study is that the natural environment and communities in parts of Central Europe will have considerably lower water resources under scenario conditions. The water quality will improve, but due to the long residence time of water and nutrients in the subsurface, this improvement will be slower in areas where the conditions for nutrient turn-over in the subsurface are poor.
Soils contain a large amount of carbon (C) that is a critical regulator of the global C budget. Already small changes in the processes governing soil C cycling have the potential to release considerable amounts of CO2, a greenhouse gas (GHG), adding additional radiative forcing to the atmosphere and hence to changing climate. Increased temperatures will probably create a feedback, causing soils to release more GHGs. Furthermore changes in soil C balance impact soil fertility and soil quality, potentially degrading soils and reducing soils function as important resource. Consequently the assessment of soil C dynamics under present, recent past and future environmental conditions is not only of scientific interest and requires an integrated consideration of main factors and processes governing soil C dynamics. To perform this assessment an eco-hydrological modelling tool was used and extended by a process-based description of coupled soil carbon and nitrogen turnover. The extended model aims at delivering sound information on soil C storage changes beside changes in water quality, quantity and vegetation growth under global change impacts in meso- to macro-scale river basins, exemplary demonstrated for a Central European river basin (the Elbe). As a result this study: ▪ Provides information on joint effects of land-use (land cover and land management) and climate changes on croplands soil C balance in the Elbe river basin (Central Europe) presently and in the future. ▪ Evaluates which processes, and at what level of process detail, have to be considered to perform an integrated simulation of soil C dynamics at the meso- to macro-scale and demonstrates the model’s capability to simulate these processes compared to observations. ▪ Proposes a process description relating soil C pools and turnover properties to readily measurable quantities. This reduces the number of model parameters, enhances the comparability of model results to observations, and delivers same performance simulating long-term soil C dynamics as other models. ▪ Presents an extensive assessment of the parameter and input data uncertainty and their importance both temporally and spatially on modelling soil C dynamics. For the basin scale assessments it is estimated that croplands in the Elbe basin currently act as a net source of carbon (net annual C flux of 11 g C m-2 yr-1, 1.57 106 tons CO2 yr-1 entire croplands on average). Although this highly depends on the amount of harvest by-products remaining on the field. Future anticipated climate change and observed climate change in the basin already accelerates soil C loss and increases source strengths (additional 3.2 g C m-2 yr-1, 0.48 106 tons CO2 yr-1 entire croplands). But anticipated changes of agro-economic conditions, translating to altered crop share distributions, display stronger effects on soil C storage than climate change. Depending on future use of land expected to fall out of agricultural use in the future (~ 30 % of croplands area as “surplus” land), the basin either considerably looses soil C and the net annual C flux to the atmosphere increases (surplus used as black fallow) or the basin converts to a net sink of C (sequestering 0.44 106 tons CO2 yr-1 under extensified use as ley-arable) or reacts with decrease in source strength when using bioenergy crops. Bioenergy crops additionally offer a considerable potential for fossil fuel substitution (~37 PJ, 1015 J per year), whereas the basin wide use of harvest by-products for energy generation has to be seen critically although offering an annual energy potential of approximately 125 PJ. Harvest by-products play a central role in soil C reproduction and a percentage between 50 and 80 % should remain on the fields in order to maintain soil quality and fertility. The established modelling tool allows quantifying climate, land use and major land management impacts on soil C balance. New is that the SOM turnover description is embedded in an eco-hydrological river basin model, allowing an integrated consideration of water quantity, water quality, vegetation growth, agricultural productivity and soil carbon changes under different environmental conditions. The methodology and assessment presented here demonstrates the potential for integrated assessment of soil C dynamics alongside with other ecosystem services under global change impacts and provides information on the potentials of soils for climate change mitigation (soil C sequestration) and on their soil fertility status.
Species respond to environmental change by dynamically adjusting their geographical ranges. Robust predictions of these changes are prerequisites to inform dynamic and sustainable conservation strategies. Correlative species distribution models (SDMs) relate species’ occurrence records to prevailing environmental factors to describe the environmental niche. They have been widely applied in global change context as they have comparably low data requirements and allow for rapid assessments of potential future species’ distributions. However, due to their static nature, transient responses to environmental change are essentially ignored in SDMs. Furthermore, neither dispersal nor demographic processes and biotic interactions are explicitly incorporated. Therefore, it has often been suggested to link statistical and mechanistic modelling approaches in order to make more realistic predictions of species’ distributions for scenarios of environmental change. In this thesis, I present two different ways of such linkage. (i) Mechanistic modelling can act as virtual playground for testing statistical models and allows extensive exploration of specific questions. I promote this ‘virtual ecologist’ approach as a powerful evaluation framework for testing sampling protocols, analyses and modelling tools. Also, I employ such an approach to systematically assess the effects of transient dynamics and ecological properties and processes on the prediction accuracy of SDMs for climate change projections. That way, relevant mechanisms are identified that shape the species’ response to altered environmental conditions and which should hence be considered when trying to project species’ distribution through time. (ii) I supplement SDM projections of potential future habitat for black grouse in Switzerland with an individual-based population model. By explicitly considering complex interactions between habitat availability and demographic processes, this allows for a more direct assessment of expected population response to environmental change and associated extinction risks. However, predictions were highly variable across simulations emphasising the need for principal evaluation tools like sensitivity analysis to assess uncertainty and robustness in dynamic range predictions. Furthermore, I identify data coverage of the environmental niche as a likely cause for contrasted range predictions between SDM algorithms. SDMs may fail to make reliable predictions for truncated and edge niches, meaning that portions of the niche are not represented in the data or niche edges coincide with data limits. Overall, my thesis contributes to an improved understanding of uncertainty factors in predictions of range dynamics and presents ways how to deal with these. Finally I provide preliminary guidelines for predictive modelling of dynamic species’ response to environmental change, identify key challenges for future research and discuss emerging developments.
Durch die Stilllegung der Kali-Gewinnung und -Produktion zwischen 1990 und 1993 sowie die begonnene Rekultivierung der Kali-Rückstandshalden haben sich die Salzfrachteintragsbedingungen für die Fließgwewässer im "Südharz-Kalirevier" in Thüringen zum Teil deutlich verändert. Aufgrund erheblich geringerer Salzeinträge in die Vorfluter Wipper und Bode ist es möglich geworden, zu einer ökologisch verträglichen Salzfrachtsteuerung überzugehen. Die Komplexität der zugrunde liegenden Stofftransportprozesse im Einzugsgebiet der Wipper macht es jedoch unumgänglich, den Steuerungsvorgang nicht nur durch reine Bilanzierungsvorgänge auf der betrachteten Steuerstrecke zu erfassen (so wie bisher praktiziert), sondern auch die Abflussdynamik im Fließgewässer und den Wasserhaushalt im Gebiet mit einzubeziehen. Die Ergebnisse dieser Arbeit dienen zum einen einer Vertiefung der Prozessverständnisse und der Interaktion von Wasserhaushalt, Abflussbildung sowie Stofftransport in bergbaubeeinflussten Einzugsgebieten am Beispiel der Unstrut bzw. ihrer relevanten Nebenflüsse. Zum anderen sollen sie zur Analyse und Bewertung eines Bewirtschaftungsplanes für die genannten Fließgewässer herangezogen werden können. Ziel dieser Arbeit ist die Erstellung eines prognosetauglichen Steuerungsinstrumentes, das für die Bewirtschaftung von Flusseinzugsgebieten unterschiedlicher Größe genutzt und unter den Rahmenbedingungen der bergbaubedingten salinaren Einträge effektiv zur Steuerung der anthropogenen Frachten eingesetzt werden kann. Die Quellen der anthropogen eingeleiteten Salzfracht sind vor allem die Rückstandshalden der stillgelegten Kaliwerke. Durch Niederschläge entstehen salzhaltige Haldenabwässer, die zum Teil ungesteuert über oberflächennahe Ausbreitungsvorgänge direkt in die Vorfluter gelangen, ein anderer Teil wird über die Speichereinrichtungen gefasst und gezielt abgestoßen. Durch Undichtigkeiten des Laugenstapelbeckens in Wipperdorf gelangen ebenfalls ungesteuerte Frachteinträge in die Wipper. Ein weiterer Eintragspfad ist zudem die geogene Belastung. Mit Hilfe detaillierter Angaben zu den oben genannten Eintragspfaden konnten Modellrechnungen im Zeitraum von 1992 bis 2003 durchgeführt werden. Durch die Ausarbeitung eines neuartigen Steuerungskonzeptes für das Laugenstapelbecken Wipperdorf, war es nun möglich, die gefasste Haldenlauge entsprechend der aktuellen Abflusssituation gezielt abstoßen zu können. Neben der modelltechnischen Erfassung der aktuellen hydrologischen Situation und der Vorgabe eines Chlorid-Konzentrationssteuerzieles für den Pegel Hachelbich, mussten dabei weitere Randbedingungen (Beckenkapazität, Beckenfüllstand, Mindestfüllstand, Kapazität des Ableitungskanals, usw.) berücksichtigt werden. Es zeigte sich, dass unter Anwendung des Steuerungskonzeptes die Schwankungsbreite der Chloridkonzentration insgesamt gesehen deutlich verringert werden konnte. Die Überschreitungshäufigkeiten bezüglich eines Grenzwertes von 2 g Chlorid/l am Pegel Hachelbich fielen deutlich, und auch die maximale Dauer einer solchen Periode konnte stark verkürzt werden. Kritische Situationen bei der modelltechnischen Frachtzusteuerung traten nur dann auf, wenn Niedrigwasserverhältnisse durch die Simulationsberechnungen noch unterschätzt wurden. Dies hatte deutliche Überschreitungen der Zielvorgaben für den Pegel Hachelbich zur Folge. Mit Hilfe des Steuerungsalgorithmus konnten desweiteren auch Szenarienberechnungen durchgeführt werden, um die Auswirkungen zukünftig zu erwartender Salzfrachten näher spezifizieren zu können. Dabei konnte festgestellt werden, dass Abdichtungsmaßnahmen der Haldenkörper sich direkt positiv auf die Entwicklung der Konzentration in Hachelbich auswirkten. Durch zusätzlich durchgeführte Langzeitszenarien konnte darüber hinaus nachgewiesen werden, dass langfristig eine Grenzwertfestlegung auf 1,5 g Chlorid/l in Hachelbich möglich ist, und die Stapelkapazitäten dazu ausreichend bemessen sind.
Direct anthropogenic influences on the Earth’s subsurface during drilling, extraction or injection activities, can affect land stability by causing subsidence, uplifts or lateral displacements. They can occur in localized as well as in uninhabited and inhabited regions. Thus the associated risks for humans, infrastructure, and environment must be minimized. To achieve this, appropriate surveillance methods must be found that can be used for simultaneous monitoring during such activities. Multi-temporal synthetic aperture radar interferometry (MT-InSAR) methods like the Persistent Scatterer Interferometry (PSI) and the Small BAseline Subsets (SBAS) have been developed as standard approaches for satellite-based surface displacement monitoring. With increasing spatial resolution and availability of SAR sensors in recent years, MT-InSAR can be valuable for the detection and mapping of even the smallest man-made displacements.
This doctoral thesis aims at investigating the capacities of the mentioned standard methods for this purpose, and comprises three main objectives against the backdrop of a user-friendly surveillance service:
(1) the spatial and temporal significance assessment against leveling, (2) the suitability evaluation of PSI and SBAS under different conditions, and (3) the analysis of the link between surface motion and subsurface processes.
Two prominent case studies on anthropogenic induced subsurface processes in Germany serve as the basis for this goal. The first is the distinct urban uplift with severe damages at Staufen im Breisgau that has been associated since 2007 with a failure to implement a shallow geothermal energy supply for an individual building. The second case study considers the pilot project of geological carbon dioxide (CO2) storage at Ketzin, and comprises borehole drilling and fluid injection of more than 67 kt CO2 between 2008 and 2013. Leveling surveys at Staufen and comprehensive background knowledge of the underground processes gained from different kinds of in-situ measurements at both locations deliver a suitable basis for this comparative study and the above stated objectives. The differences in location setting, i.e. urban versus rural site character, were intended to investigate the limitations in the applicability of PSI and SBAS.
For the MT-InSAR analysis, X-band images from the German TerraSAR-X and TanDEM-X satellites were acquired in the standard Stripmap mode with about 3 m spatial resolution in azimuth and range direction. Data acquisition lasted over a period of five years for Staufen (2008-2013), and four years for Ketzin (2009-2013). For the first approximation of the subsurface source, an inversion of the InSAR outcome in Staufen was applied. The modeled uplift based on complex hydromechanical simulations and a correlation analysis with bottomhole pressure data were used for comparison with MT-InSAR measurements at Ketzin.
In response to the defined objectives of this thesis, a higher level of detail can be achieved in mapping surface displacements without in-situ effort by using MT-InSAR in comparison to leveling (1). A clear delineation of the elliptical shaped uplift border and its magnitudes at different parts was possible at Staufen, with the exception of a vegetated area in the northwest. Vegetation coverage and the associated temporal signal decorrelation are the main limitations of MT-InSAR as clearly demonstrated at the Ketzin test site. They result in insufficient measurement point density and unwrapping issues. Therefore, spatial resolutions of one meter or better are recommended to achieve an adequate point density for local displacement analysis and to apply signal noise reduction. Leveling measurements can provide a complementary data source here, but require much effort pertaining to personnel even at the local scale. Horizontal motions could be identified at Staufen by only comparing the temporal evolution of the 1D line of sight (LOS) InSAR measurements with the available leveling data. An exception was the independent LOS decomposition using ascending and descending data sets for the period 2012-2013. The full 3D displacement field representation failed due to insufficient orbit-related, north-south sensitivity of the satellite-based measurements. By using the dense temporal mapping capabilities of the TerraSAR-X/TanDEM-X satellites after every 11 days, the temporal displacement evolution could be captured as good as that with leveling.
With respect to the tested methods and in the view of generality, SBAS should be preferred over PSI (2). SBAS delivered a higher point density, and was therefore less affected by phase unwrapping issues in both case studies. Linking surface motions with subsurface processes is possible when considering simplified geophysical models (3), but it still requires intensive research to gain a deep understanding.
In Forschungsprogrammen werden zahlreiche Akteure mit unterschiedlichen Hintergründen und fachlichen Expertisen in Einzel- oder Verbundvorhaben vereint, die jedoch weitestgehend unabhängig voneinander durchgeführt werden. Vor dem Hintergrund, dass gesamtgesellschaftliche Herausforderungen wie die globale Erwärmung zunehmend disziplinübergreifende Lösungsansätze erfordern, sollten Vernetzungs- und Transferprozesse in Forschungsprogrammen stärker in den Fokus rücken. Mit der Implementierung einer Begleitforschung kann dieser Forderung Rechnung getragen werden. Begleitforschung unterscheidet sich in ihrer Herangehensweise und ihrer Zielvorstellung von den „üblichen“ Projekten und kann in unterschiedlichen theoretischen Reinformen auftreten. Verkürzt dargestellt agiert sie entweder (1) inhaltlich komplementär zu den jeweiligen Forschungsprojekten, (2) auf einer Metaebene mit Fokus auf die Prozesse im Forschungsprogramm oder (3) als integrierende, synthetisierende Instanz, für die die Vernetzung der Projekte im Forschungsprogramm sowie der Wissenstransfer von Bedeutung sind. Zwar sind diese Formen analytisch in theoretische Reinformen trennbar, in der Praxis ergibt sich in der Regel jedoch ein Mix aus allen dreien.
In diesem Zusammenhang schließt die vorliegende Dissertation als ergänzende Studie an bisherige Ansätze zum methodischen Handwerkszeug der Begleitforschung an und fokussiert auf folgende Fragestellungen: Auf welcher Basis kann die Vernetzung der Akteure in einem Forschungsprogramm durchgeführt werden, um diese effektiv zusammenzubringen? Welche weiteren methodischen Elemente sollten daran ansetzen, um einen Mehrwert zu generieren, der die Summe der Einzelergebnisse des Forschungsprogrammes übersteigt? Von welcher Art kann dann ein solcher Mehrwert sein und welche Rolle spielt dabei die Begleitforschung?
Das erste methodische Element bildet die Erhebung und Aufbereitung einer Ausgangsdatenbasis. Durch eine auf semantischer Analyse basierenden Verschlagwortung projektbezogener Texte lässt sich eine umfassende Datenbasis aus den Inhalten der Forschungsprojekte generieren. Die Schlagwörter werden dabei anhand eines kontrollierten Vokabulars in einem Schlagwortkatalog strukturiert. Parallel dazu werden sie wiederum den jeweiligen Projekten zugeordnet, wodurch diese thematische Merkmale erhalten. Um thematische Überschneidungen zwischen Forschungsprojekten sichtbar und interpretierbar zu machen, beinhaltet das zweite Element Ansätze zur Visualisierung. Dazu werden die Informationen in einen Netzwerkgraphen transferiert, der sowohl alle im Forschungsprogramm involvierten Projekte als auch die identifizierten Schlagwörter in Relation zueinander abbilden kann. So kann zum Beispiel sichtbar gemacht werden, welche Forschungsprojekte sich auf Basis ihrer Inhalte „näher“ sind als andere. Genau diese Information wird im dritten methodischen Element als Planungsgrundlage für unterschiedliche Veranstaltungsformate wie Arbeitstagungen oder Transferwerkstätten genutzt. Das vierte methodische Element umfasst die Synthesebildung. Diese gestaltet sich als Prozess über den gesamten Zeitraum der Zusammenarbeit zwischen Begleitforschung und den weiteren Forschungsprojekten hinweg, da in die Synthese unter anderem Zwischen-, Teil- und Endergebnisse der Projekte einfließen, genauso wie Inhalte aus den unterschiedlichen Veranstaltungen. Letztendlich ist dieses vierte Element auch das Mittel, um aus den integrierten und synthetisierten Informationen Handlungsempfehlungen für zukünftige Vorhaben abzuleiten.
Die Erarbeitung der methodischen Elemente erfolgte im laufenden Prozess des Begleitforschungsprojektes KlimAgrar, welches der vorliegenden Dissertation als Fallbeispiel dient und dessen Hintergründe in der Thematik Klimaschutz und Klimaanpassung in der Landwirtschaft im Text ausführlich erläutert werden.
Wälder haben im Bezug zum Klimawandel mehrere Rollen: Sie sind Kohlenstoffspeicher, -senken, sowie Lieferanten von Holz als Rohstoff für die Kohlenstoffspeicher in Produkten und für Substitution fossiler Energieträger. Unter Klimaschutzgesichtspunkten ist es wünschenswert, die Kohlenstoffbindung im Gesamtsystem aus Senken, Speichern und Substitution zu maximieren und zu entscheiden, welche Maßnahme an welchem Ort und unter welchen Rahmenbedingungen den größten positiven Effekt auf die CO2-Bilanz hat. Um die Speicherung in den verschiedenen Kompartimenten erfassen zu können müssen geeignete Inventurverfahren zur Verfügung stehen. Die IPCC – GPG benennen die Speicher und geben zum Teil Anforderungen an die zu erreichende Inventurgenauigkeit. Aus der klassischen Forsteinrichtung stehen genügend Methoden zur Verfügung, um das oberirdische Volumen sehr genau zu erheben. Um den Anforderungen an ein umfassendes Kohlenstoffmonitoring genügen zu können, müssen diese Verfahren in den Bereichen Erfassung von Störungsfolgen, Totholzdynamik, Boden und der Berechnung von Gesamt-Kohlenstoffvorräten aus dem Holzvolumen ergänzt werden. Zusätzlich bietet sich an, Bewirtschaftungsmaßnahmen entsprechend zu erfassen, um ihre Auswirkung auf die Kohlenstoffdynamik ebenfalls feststellen zu können. Dies ist für die Berichterstattung zwischen Inventuren sowie für die Herausrechnung von nicht-menschenverursachter erhöhter Kohlenstoffspeicherung („factoring out“ im Sinne des KP) wünschenswert. Wenn Bewirtschaftungsmaßnahmen unterschieden werden können und ihre Auswirkungen auf C-Vorräte bestimmbar sind, ist eine Verifizierung erhöhter Speicherung auch z. B. für Projekte nach Art. 3.4 des KP durchführbar. Diese Arbeiten stecken jedoch noch in der Anfangsphase. Im Rahmen dieser Arbeit wurde die erste verfügbare qualitative Übersicht zu dieser Thematik erstellt. Die Optimierung der Wald-Holz-Option wird durch die im Kyoto-Protokoll (und den zugehörigen Folgeabkommen) vereinbarten Regelungen erschwert, da einerseits zwischen Wald und Produkten eine Trennung besteht und andererseits die Maßnahmenverantwortlichem im Wald nicht direkt durch das KP angesprochen werden. Eingeschlagenes Holz wird im Wald als Emission betrachtet und dem entsprechenden Sektor zugerechnet, was jedoch keine Auswirkungen auf den Forstbetrieb hat. Dieser profitiert im Gegenteil derzeit von der durch die – auch von KP Regelungen beeinflussten – Holzpreise und erhöht die Nutzungen, was zu Vorratsabsenkungen im Wald führt. Ob diese Absenkungen durch die Substitutionseffekte des geernteten Holzes kompensiert werden ist derzeit noch nicht geklärt. Um die Trennung zwischen Wald und Produktpool aufzuweichen bietet es sich an, die Waldbesitzer am Emissionsrechtehandel teilhaben zu lassen, damit nicht nur die Ernte sondern auch der Ernteverzicht finanziell bewertbar sind. Sozio-ökonomische Szenarien zur künftigen Entwicklung der Landwirtschaft zeigen große Flächenpotentiale, die für die Nahrungs- und Futtermittelproduktion nicht mehr benötigt werden oder nicht mehr rentabel sein werden. Eine mögliche Nutzung in Zukunft sind Energieholzplantagen. Informationen zu möglichen Erträgen sind zur Zeit noch unzureichend und Analysen zur Nachhaltigkeit dieser Erträge unter Klimawandel sind nicht vorhanden. In dieser Arbeit wurde mit dem ökophysiologischen Waldwachstumsmodell 4C an Beispielsstandorten in Brandenburg das Wachstum von Energieholzplantagen unter derzeitigem Klima und unter verschiedenen regionalisierten Klimawandelszenarien bis 2055 simuliert. Ertragspotentiale liegen derzeit auf der Mehrzahl der Standorte im positiven Bereich, auf einigen Standorten ist jedoch nur begrenzt mit positiven Deckungsbeiträgen zu rechnen. Bis 2055 ist in allen Szenarien mit einem leichten Rückgang der Erträge und einer deutlicheren Verringerung der Grundwasserneubildung unter Energieholzplantagen zu rechnen. Die Unterschiede zwischen Standorten sind jedoch derzeit und unter zukünftig möglichem Klima stärker als klimabedingte Änderungen. Bei der großflächigen Anlage von Energieholzplantagen können negative Auswirkungen auf die Biodiversität und andere Naturschutzbelange eintreten. Eine diese Effekte abmildernde Flächengestaltung, die trotzdem Erträge auf dem Niveau heutiger Vollerwerbslandwirtschaft erreicht, ist möglich. Insgesamt lässt sich für die Optimierung der Wald-Holz-Option feststellen, dass eine Nicht-Nutzung bestehender Waldflächen unter Klimaschutzgesichtspunkten negativ ist. Der Substitutionseffekt geernteten Holzes beträgt zusätzliche ca. 70 Prozent Kohlenstoff, die in dieser Form in nicht bewirtschafteten mitteleuropäischen Wäldern nicht zusätzlich gespeichert werden. Es ist davon auszugehen, dass sich durch die Berücksichtigung von Substitutionseffekten andere – wahrscheinlich kürzere – als die heute üblichen Produktionszeiten ergeben. Auf bisher waldfreien Flächen ist die Anlage von Energieholzplantagen positiver zu werten als eine normale Aufforstung.
Die effektive Erzeugung von Wissen ist eine der zentralen Herausforderungen des 21. Jahrhunderts. Informations- und Kommunikationstechnologien, wie die Neuen Medien, durchdringen alle Bereiche des täglichen Lebens. Sie ermöglichen den Zugriff auf gigantische Datenmengen, die die Grundvoraussetzung für die Generierung von Wissen darstellen, aber gleichzeitig eine Datenflut bedeuten, der wir ohnmächtig gegenüberstehen. Innerhalb der raumwissenschaftlichen Fachdisziplinen spielen die Neuen Medien für die Kommunikation von Sachinformation eine wichtige Rolle. Die internetbasierte Distribution von Karten, angereichert mit zusätzlichen Informationen in Form von Audiosequenzen oder Filmausschnitten, spiegelt diese Entwicklung wieder. Vor diesem Hintergrund erfolgt die Untersuchung der Frage, ob Neue Medien dazu genutzt werden können, raumwissenschaftliche Fachinhalte zu vermitteln. Von besonderem Interesse ist dabei die Frage, ob durch den Einsatz Neuer Medien in der Lehre ein Mehrwert für die Benutzer entsteht. Der Ausgangspunkt dieser Forschungsfrage besteht in der herausragenden Bedeutung von Visualisierung zur leicht verständlichen Darstellung komplexer Sachverhalte, sowie der entsprechenden Werkzeug- und Methodenkompetenz für die Nutzung Neuer Medien in den raumwissen-schaftlichen Disziplinen. Die Grundlage für die Entwicklung von mehrwertigen Lernangeboten ist die Betrachtung von Lernen als Kommunikationsprozess zur Konstruktion von Wissen, was bedeutet, dass der Entwickler derartiger Angebote über Möglichkeiten zur Optimierung dieses Kommunikationsprozesses verfügt. Auf dieser Basis erfolgt eine Erweiterung des in den raumwissenschaftlichen Disziplinen verwendeten Kommunikationsbegriffs um den Aspekt der Lehre von Fachinhalten. Als relevante Ansatzpunkte für die Optimierung der Kommunikation von Fachinhalten werden die didaktische und die mediale Aufbereitung identifiziert. Diese können zum einen die Motivation der Lernenden positiv beeinflussen und zum anderen durch Wirkung auf die Wahrnehmung der Lernenden zu einem vereinfachten Verständnis beitragen. Im Mittelpunkt der didaktischen Aufbereitung steht die problemorientierte Vermittlung der Inhalte, d.h. sie werden anhand konkreter Problemsituationen aus der Praxis vermittelt und gelten deshalb als besonders anschaulich und anwendungsorientiert. Bei der medialen Aufbereitung steht die Verwendung einer Kombination aus Text und Graphik/Animation im Mittelpunkt, die darauf abzielt, das Verstehen komplexer Sachverhalte zu erleichtern. Zur Überprüfung der Forschungsfrage haben Studierende raumwissenschaftlicher Studiengänge der Universität Potsdam das Lernangebot ausprobiert und anhand eines Fragebogens verschiedene Aspekte bewertet. Themenschwerpunkt dieser Evaluation waren die Akzeptanz, die Bedienbarkeit, die didak-tische und mediale Aufbereitung der Inhalte, die Auswahl und Verständlichkeit der Inhalte sowie die Praxistauglichkeit. Ein Großteil der Befragten hat dem Lernangebot einen Mehrwert gegenüber konventionellen Bildungsangeboten bescheinigt. Als Aspekte dieses Mehrwertes haben sich vor allem die Praxisnähe, die Unabhängigkeit von Zeit und Ort bei der Nutzung und die Vermittlung der Inhalte auf der Grundlage einer Kombination aus Text und interaktiven Animationen herauskristallisiert.
Zwischen 1990 und 1994 wurden rund 1000 Liegenschaften, die in der ehemaligen DDR von der Sowjetarmee und der NVA für militärische Übungen genutzt wurden, an Bund und Länder übergeben. Die größten Truppenübungsplätze liegen in Brandenburg und sind heute teilweise in Großschutzgebiete integriert, andere Plätze werden von der Bundeswehr weiterhin aktiv genutzt. Aufgrund des militärischen Betriebs sind die Böden dieser Truppenübungsplätze oft durch Blindgänger, Munitionsreste, Treibstoff- und Schmierölreste bis hin zu chemischen Kampfstoffen belastet. Allerdings existieren auf fast allen Liegenschaften neben diesen durch Munition und militärische Übungen belasteten Bereichen auch naturschutzfachlich wertvolle Flächen; gerade in den Offenlandbereichen kann dies durchaus mit einer Belastung durch Kampfmittel einhergehen. Charakteristisch für diese offenen Flächen, zu denen u.a. Zwergstrauchheiden, Trockenrasen, wüstenähnliche Sandflächen und andere nährstoffarme baumlose Lebensräume gehören, sind Großflächigkeit, Abgeschiedenheit sowie ihre besondere Nutzung und Bewirtschaftung, d.h. die Abwesenheit von land- und forstwirtschaftlichem Betrieb sowie von Siedlungsflächen. Diese Charakteristik war die Grundlage für die Entwicklung einer speziell angepassten Flora und Fauna. Nach Beendigung des Militärbetriebs setzte dann in weiten Teilen eine großflächige Sukzession – die allmähliche Veränderung der Zusammensetzung von Pflanzen- und Tiergesellschaften – ein, die diese offenen Bereiche teilweise bereits in Wald verwandelte und somit verschwinden ließ. Dies wiederum führte zum Verlust der an diese Offenlandflächen gebundenen Tier- und Pflanzenarten. Zur Erhaltung, Gestaltung und Entwicklung dieser offenen Flächen wurden daher von einer interdisziplinären Gruppe von Naturwissenschaftlern verschiedene Methoden und Konzepte auf ihre jeweilige Wirksamkeit untersucht. So konnten schließlich die für die jeweiligen Standortbedingungen geeigneten Maßnahmen eingeleitet werden. Voraussetzung für die Einleitung der Maßnahmen sind zum einen Kenntnisse zu diesen jeweiligen Standortbedingungen, d.h. zum Ist-Zustand, sowie zur Entwicklung der Flächen, d.h. zur Dynamik. So kann eine Abschätzung über die zukünftige Flächenentwicklung getroffen werden, damit ein effizienter Maßnahmeneinsatz stattfinden kann. Geoinformationssysteme (GIS) spielen dabei eine entscheidende Rolle zur digitalen Dokumentation der Biotop- und Nutzungstypen, da sie die Möglichkeit bieten, raum- und zeitbezogene Geometrie- und Sachdaten in großen Mengen zu verarbeiten. Daher wurde ein fachspezifisches GIS für Truppenübungsplätze entwickelt und implementiert. Die Aufgaben umfassten die Konzeption der Datenbank und des Objektmodells sowie fachspezifischer Modellierungs-, Analyse- und Präsentationsfunktionen. Für die Integration von Fachdaten in die GIS-Datenbank wurde zudem ein Metadatenkatalog entwickelt, der in Form eines zusätzlichen GIS-Tools verfügbar ist. Die Basisdaten für das GIS wurden aus Fernerkundungsdaten, topographischen Karten sowie Geländekartierungen gewonnen. Als Instrument für die Abschätzung der zukünftigen Entwicklung wurde das Simulationstool AST4D entwickelt, in dem sowohl die Nutzung der (Raster-)Daten des GIS als Ausgangsdaten für die Simulationen als auch die Nutzung der Simulationsergebnisse im GIS möglich ist. Zudem können die Daten in AST4D raumbezogen visualisiert werden. Das mathematische Konstrukt für das Tool war ein so genannter Zellulärer Automat, mit dem die Flächenentwicklung unter verschiedenen Voraussetzungen simuliert werden kann. So war die Bildung verschiedener Szenarien möglich, d.h. die Simulation der Flächenentwicklung mit verschiedenen (bekannten) Eingangsparametern und den daraus resultierenden unterschiedlichen (unbekannten) Endzuständen. Vor der Durchführung einer der drei in AST4D möglichen Simulationsstufen können angepasst an das jeweilige Untersuchungsgebiet benutzerspezifische Festlegungen getroffen werden.
Die Kartierung planetarer Körper stellt ein wesentliches Mittel der raumfahrtgestützten Exploration der Himmelskörper dar. Aktuell kommen zur Erstellung der planetaren Karten Geo-Informationssysteme (GIS) zum Einsatz. Ziel dieser Arbeit ist es, eine GIS-orientierte Prozesskette (Planetary Mapping System (PMS)) zu konzipieren, mit dem Schwerpunkt geologische und geomorphologische Karten planetarer Oberflächen einheitlich durchführen zu können und nachhaltig zugänglich zu machen.