Filtern
Erscheinungsjahr
- 2014 (17) (entfernen)
Dokumenttyp
- Dissertation (17) (entfernen)
Gehört zur Bibliographie
- ja (17) (entfernen)
Schlagworte
- induced seismicity (2)
- 3D geomechanical numerical model (1)
- 3D geomechanisch-nummerische Modellierung (1)
- Attribut-Analysen (1)
- Aufenthaltsdauer (1)
- Bergsturz (1)
- Bodenwassergehalt (1)
- Common-Reflection-Surface (1)
- Cyprus arc (1)
- Deformationsquellenmodellierung (1)
- Dendroklimatologie (1)
- Denudation (1)
- Finnmark Platform (1)
- Geomorphologie (1)
- Geophysik (1)
- Georadar (1)
- Himalaya-Tibet Orogen (1)
- Himalaya-Tibet orogen (1)
- Holozän (1)
- InSAR (1)
- Indian Monsoon (1)
- Krustenstruktur der Süd-Türkei (1)
- Krustenstruktur des Eratosthenes Seeberges (1)
- Llaima Vulkan (1)
- Llaima volcano (1)
- Loppa High (1)
- Momententensor (1)
- Paläogeographie (1)
- Partikel Swarm Optimierung (1)
- Quartär (1)
- Quellenumkehr (1)
- Ringstörungen (1)
- Seismologie (1)
- Spannungsmuster (1)
- Stabile Sauerstoff- und Kohlenstoffisotope (1)
- Tectona grandis (1)
- Tendürek Vulkan (1)
- Tendürek volcano (1)
- Tropen (1)
- UV-Lasermikrodissektion (1)
- UV-laser microdissection (1)
- Untergrund (1)
- Verarbeitung seismischer Daten (1)
- Wellengeschwindigkeit (1)
- Zypernbogen (1)
- aktive Weitewinkel-Seismik (1)
- beginnende Kontinent-Kontinent Kollision (1)
- circular statistics (1)
- controlled source wide angle seismic (1)
- cosmogenic nuclides (1)
- crustal stress (1)
- crustal structure of south central Turkey (1)
- crustal structure of the Eratosthenes Seamount (1)
- deformation source modeling (1)
- dendroclimatology (1)
- denudation (1)
- earthquake location (1)
- geomorphology (1)
- geophyics (1)
- geothermischer Reservoire (1)
- global inversion (1)
- globale Inversion (1)
- ground-penetration radar (1)
- holocene (1)
- incipient continent-continent collision (1)
- indischer Monsun (1)
- induzierten Seismizität (1)
- kosmogene Nuklide (1)
- krustale Spannungen (1)
- microseismicity (1)
- moment tensor (1)
- oxygen and carbon stable isotopes (1)
- paleogeography (1)
- particle swarm optimisation (1)
- quaternary (1)
- ring-fault (1)
- rockslide (1)
- seismic (1)
- seismic attributes (1)
- seismic sequence stratigraphy (1)
- seismische Attribute (1)
- seismische Sequenzstratigraphie (1)
- seismische Stapelungs-Methode (1)
- seismology (1)
- soil water content (1)
- source duration (1)
- source inversion (1)
- stress pattern (1)
- subsurface (1)
- tectonic stress (1)
- tektonische Spannungen (1)
- tropics (1)
- wave velocities (1)
- zirkulare Statistik (1)
Institut
- Institut für Geowissenschaften (17) (entfernen)
Surface displacement at volcanic edifices is related to subsurface processes associated with magma movements, fluid transfers within the volcano edifice and gravity-driven deformation processes. Understanding of associated ground displacements is of importance for assessment of volcanic hazards. For example, volcanic unrest is often preceded by surface uplift, caused by magma intrusion and followed by subsidence, after the withdrawal of magma. Continuous monitoring of the surface displacement at volcanoes therefore might allow the forecasting of upcoming eruptions to some extent. In geophysics, the measured surface displacements allow the parameters of possible deformation sources to be estimated through analytical or numerical modeling. This is one way to improve the understanding of subsurface processes acting at volcanoes. Although the monitoring of volcanoes has significantly improved in the last decades (in terms of technical advancements and number of monitored volcanoes), the forecasting of volcanic eruptions remains puzzling. In this work I contribute towards the understanding of the subsurface processes at volcanoes and thus to the improvement of volcano eruption forecasting. I have investigated the displacement field of Llaima volcano in Chile and of Tendürek volcano in East Turkey by using synthetic aperture radar interferometry (InSAR). Through modeling of the deformation sources with the extracted displacement data, it was possible to gain insights into potential subsurface processes occurring at these two volcanoes that had been barely studied before. The two volcanoes, although of very different origin, composition and geometry, both show a complexity of interacting deformation sources. At Llaima volcano, the InSAR technique was difficult to apply, due to the large decorrelation of the radar signal between the acquisition of images. I developed a model-based unwrapping scheme, which allows the production of reliable displacement maps at the volcano that I used for deformation source modeling. The modeling results show significant differences in pre- and post-eruptive magmatic deformation source parameters. Therefore, I conjecture that two magma chambers exist below Llaima volcano: a post-eruptive deep one and a shallow one possibly due to the pre-eruptive ascent of magma. Similar reservoir depths at Llaima have been confirmed by independent petrologic studies. These reservoirs are interpreted to be temporally coupled. At Tendürek volcano I have found long-term subsidence of the volcanic edifice, which can be described by a large, magmatic, sill-like source that is subject to cooling contraction. The displacement data in conjunction with high-resolution optical images, however, reveal arcuate fractures at the eastern and western flank of the volcano. These are most likely the surface expressions of concentric ring-faults around the volcanic edifice that show low magnitudes of slip over a long time. This might be an alternative mechanism for the development of large caldera structures, which are so far assumed to be generated during large catastrophic collapse events. To investigate the potential subsurface geometry and relation of the two proposed interacting sources at Tendürek, a sill-like magmatic source and ring-faults, I have performed a more sophisticated numerical modeling approach. The optimum source geometries show, that the size of the sill-like source was overestimated in the simple models and that it is difficult to determine the dip angle of the ring-faults with surface displacement data only. However, considering physical and geological criteria a combination of outward-dipping reverse faults in the west and inward-dipping normal faults in the east seem to be the most likely. Consequently, the underground structure at the Tendürek volcano consists of a small, sill-like, contracting, magmatic source below the western summit crater that causes a trapdoor-like faulting along the ring-faults around the volcanic edifice. Therefore, the magmatic source and the ring-faults are also interpreted to be temporally coupled. In addition, a method for data reduction has been improved. The modeling of subsurface deformation sources requires only a relatively small number of well distributed InSAR observations at the earth’s surface. Satellite radar images, however, consist of several millions of these observations. Therefore, the large amount of data needs to be reduced by several orders of magnitude for source modeling, to save computation time and increase model flexibility. I have introduced a model-based subsampling approach in particular for heterogeneously-distributed observations. It allows a fast calculation of the data error variance-covariance matrix, also supports the modeling of time dependent displacement data and is, therefore, an alternative to existing methods.
In March 2010, the project CoCoCo (incipient COntinent-COntinent COllision) recorded a 650 km long amphibian N-S wide-angle seismic profile, extending from the Eratosthenes Seamount (ESM) across Cyprus and southern Turkey to the Anatolian plateau. The aim of the project is to reveal the impact of the transition from subduction to continent-continent collision of the African plate with the Cyprus-Anatolian plate. A visual quality check, frequency analysis and filtering were applied to the seismic data and reveal a good data quality. Subsequent first break picking, finite-differences ray tracing and inversion of the offshore wide-angle data leads to a first-arrival tomographic model. This model reveals (1) P-wave velocities lower than 6.5 km/s in the crust, (2) a variable crustal thickness of about 28 - 37 km and (3) an upper crustal reflection at 5 km depth beneath the ESM. Two land shots on Turkey, also recorded on Cyprus, airgun shots south of Cyprus and geological and previous seismic investigations provide the information to derive a layered velocity model beneath the Anatolian plateau and for the ophiolite complex on Cyprus. The analysis of the reflections provides evidence for a north-dipping plate subducting beneath Cyprus. The main features of this layered velocity model are (1) an upper and lower crust with large lateral changes of the velocity structure and thickness, (2) a Moho depth of about 38 - 45 km beneath the Anatolian plateau, (3) a shallow north-dipping subducting plate below Cyprus with an increasing dip and (4) a typical ophiolite sequence on Cyprus with a total thickness of about 12 km. The offshore-onshore seismic data complete and improve the information about the velocity structure beneath Cyprus and the deeper part of the offshore tomographic model. Thus, the wide-angle seismic data provide detailed insights into the 2-D geometry and velocity structures of the uplifted and overriding Cyprus-Anatolian plate. Subsequent gravity modelling confirms and extends the crustal P-wave velocity model. The deeper part of the subducting plate is constrained by the gravity data and has a dip angle of ~ 28°. Finally, an integrated analysis of the geophysical and geological information allows a comprehensive interpretation of the crustal structure related to the collision process.
Automated location of seismic events is a very important task in microseismic monitoring operations as well for local and regional seismic monitoring. Since microseismic records are generally characterised by low signal-to-noise ratio, such methods are requested to be noise robust and sufficiently accurate. Most of the standard automated location routines are based on the automated picking, identification and association of the first arrivals of P and S waves and on the minimization of the residuals between theoretical and observed arrival times of the considered seismic phases. Although current methods can accurately pick P onsets, the automatic picking of the S onset is still problematic, especially when the P coda overlaps the S wave onset. In this thesis I developed a picking free automated method based on the Short-Term-Average/Long-Term-Average (STA/LTA) traces at different stations as observed data. I used the STA/LTA of several characteristic functions in order to increase the sensitiveness to the P wave and the S waves. For the P phases we use the STA/LTA traces of the vertical energy function, while for the S phases, we use the STA/LTA traces of the horizontal energy trace and then a more optimized characteristic function which is obtained using the principal component analysis technique. The orientation of the horizontal components can be retrieved by robust and linear approach of waveform comparison between stations within a network using seismic sources outside the network (chapter 2). To locate the seismic event, we scan the space of possible hypocentral locations and origin times, and stack the STA/LTA traces along the theoretical arrival time surface for both P and S phases. Iterating this procedure on a three-dimensional grid we retrieve a multidimensional matrix whose absolute maximum corresponds to the spatial and temporal coordinates of the seismic event. Location uncertainties are then estimated by perturbing the STA/LTA parameters (i.e the length of both long and short time windows) and relocating each event several times. In order to test the location method I firstly applied it to a set of 200 synthetic events. Then we applied it to two different real datasets. A first one related to mining induced microseismicity in a coal mine in the northern Germany (chapter 3). In this case we successfully located 391 microseismic event with magnitude range between 0.5 and 2.0 Ml. To further validate the location method I compared the retrieved locations with those obtained by manual picking procedure. The second dataset consist in a pilot application performed in the Campania-Lucania region (southern Italy) using a 33 stations seismic network (Irpinia Seismic Network) with an aperture of about 150 km (chapter 4). We located 196 crustal earthquakes (depth < 20 km) with magnitude range 1.1 < Ml < 2.7. A subset of these locations were compared with accurate locations retrieved by a manual location procedure based on the use of a double difference technique. In both cases results indicate good agreement with manual locations. Moreover, the waveform stacking location method results noise robust and performs better than classical location methods based on the automatic picking of the P and S waves first arrivals.
Unterschiedliche Verfahren zur Ermittlung von Georadar-Wellengeschwindigkeiten wurden entwickelt und erfolgreich angewendet. Für die Verfahren wurden statistische Methoden und Schwarmintelligenz-Algorithmen benutzt. Es wurde gezeigt, dass die neuen Verfahren schneller, präziser und besser reproduzierbare Ergebnisse für Georadar-Wellengeschwindigkeit erzielen als herkömmliche Verfahren.
Mit verbesserten Werten der Georadar-Wellengeschwindigkeit lassen sich die verzerrten dreidimensionalen Abbilder der obersten zehn Meter des Untergrundes, welche sich mit Georadar-Daten erzeugen lassen, korrigieren. In diesen korrigierten Abbildern sind dann realistische Tiefen von Schichten oder Objekten im Untergrund besser messbar. Außerdem verbessern präzisere Wellengeschwindigkeiten die Bestimmung von Bodenparametern, wie Wassergehalt oder Tonanteil. Die präsentierten Verfahren erlauben eine quantitative Angabe von Fehlern der bestimmten Wellengeschwindigkeit und der daraus folgenden Tiefen und Bodenparametern im Untergrund. Die Vorteile dieser neu entwickelten Verfahren zur Charakterisierung des Untergrundes der oberen Meter wurde an Feldbeispielen demonstriert.
Knowing the rates and mechanisms of geomorphic process that shape the Earth’s surface is crucial to understand landscape evolution. Modern methods for estimating denudation rates enable us to quantitatively express and compare processes of landscape downwearing that can be traced through time and space—from the seemingly intact, though intensely shattered, phantom blocks of the catastrophically fragmented basal facies of giant rockslides up to denudational noise in orogen-wide data sets averaging over several millennia. This great variety of spatiotemporal scales of denudation rates is both boon and bane of geomorphic process rates. Indeed, processes of landscape downwearing can be traced far back in time, helping us to understand the Earth’s evolution. Yet, this benefit may turn into a drawback due to scaling issues if these rates are to be compared across different observation timescales.
This thesis investigates the mechanisms, patterns and rates of landscape downwearing across the Himalaya-Tibet orogen.
Accounting for the spatiotemporal variability of denudation processes, this thesis addresses landscape downwearing on three distinctly different spatial scales, starting off at the local scale of individual hillslopes where considerable amounts of debris are generated from rock instantaneously: Rocksliding in active mountains is a major impetus of landscape downwearing. Study I provides a systematic overview of the internal sedimentology of giant rockslide deposits and thus meets the challenge of distinguishing them from macroscopically and microscopically similar glacial deposits, tectonic fault-zone breccias, and impact breccias. This distinction is important to avoid erroneous or misleading deduction of paleoclimatic or tectonic implications. -> Grain size analysis shows that rockslide-derived micro-breccia closely resemble those from meteorite impact or tectonic faults. -> Frictionite may occur more frequently that previously assumed. -> Mössbauer-spectroscopy derived results indicate basal rock melting in the absence of water, involving short-term temperatures of >1500°C.
Zooming out, Study II tracks the fate of these sediments, using the example of the upper Indus River, NW India. There we use river sand samples from the Indus and its tributaries to estimate basin-averaged denudation rates along a ~320-km reach across the Tibetan Plateau margin, to answer the question whether incision into the western Tibetan Plateau margin is currently active or not. -> We find an about one-order-of-magnitude upstream decay—from 110 to 10 mm kyr^-1—of cosmogenic Be-10-derived basin-wide denudation rates across the morphological knickpoint that marks the transition from the Transhimalayan ranges to the Tibetan Plateau. This trend is corroborated by independent bulk petrographic and heavy mineral analysis of the same samples. -> From the observation that tributary-derived basin-wide denudation rates do not increase markedly until ~150–200 km downstream of the topographic plateau margin we conclude that incision into the Tibetan Plateau is inactive. -> Comparing our postglacial Be-10-derived denudation rates to long-term (>10^6 yr) estimates from low-temperature thermochronometry, ranging from 100 to 750 mm kyr^-1, points to an order- of-magnitude decay of rates of landscape downwearing towards present. We infer that denudation rates must have been higher in the Quaternary, probably promoted by the interplay of glacial and interglacial stages.
Our investigation of regional denudation patterns in the upper Indus finally is an integral part of Study III that synthesizes denudation of the Himalaya-Tibet orogen. In order to identify general and time-invariant predictors for Be-10-derived denudation rates we analyze tectonic, climatic and topographic metrics from an inventory of 297 drainage basins from various parts of the orogen. Aiming to get insight to the full response distributions of denudation rate to tectonic, climatic and topographic candidate predictors, we apply quantile regression instead of ordinary least squares regression, which has been standard analysis tool in previous studies that looked for denudation rate predictors. -> We use principal component analysis to reduce our set of 26 candidate predictors, ending up with just three out of these: Aridity Index, topographic steepness index, and precipitation of the coldest quarter of the year. -> Topographic steepness index proves to perform best during additive quantile regression. Our consequent prediction of denudation rates on the basin scale involves prediction errors that remain between 5 and 10 mm kyr^-1. -> We conclude that while topographic metrics such as river-channel steepness and slope gradient—being representative on timescales that our cosmogenic Be-10-derived denudation rates integrate over—generally appear to be more suited as predictors than climatic and tectonic metrics based on decadal records.
An important contribution of geosciences to the renewable energy production portfolio is the exploration and utilization of geothermal resources. For the development of a geothermal project at great depths a detailed geological and geophysical exploration program is required in the first phase. With the help of active seismic methods high-resolution images of the geothermal reservoir can be delivered. This allows potential transport routes for fluids to be identified as well as regions with high potential of heat extraction to be mapped, which indicates favorable conditions for geothermal exploitation. The presented work investigates the extent to which an improved characterization of geothermal reservoirs can be achieved with the new methods of seismic data processing. The summations of traces (stacking) is a crucial step in the processing of seismic reflection data. The common-reflection-surface (CRS) stacking method can be applied as an alternative for the conventional normal moveout (NMO) or the dip moveout (DMO) stack. The advantages of the CRS stack beside an automatic determination of stacking operator parameters include an adequate imaging of arbitrarily curved geological boundaries, and a significant increase in signal-to-noise (S/N) ratio by stacking far more traces than used in a conventional stack. A major innovation I have shown in this work is that the quality of signal attributes that characterize the seismic images can be significantly improved by this modified type of stacking in particular. Imporoved attribute analysis facilitates the interpretation of seismic images and plays a significant role in the characterization of reservoirs. Variations of lithological and petro-physical properties are reflected by fluctuations of specific signal attributes (eg. frequency or amplitude characteristics). Its further interpretation can provide quality assessment of the geothermal reservoir with respect to the capacity of fluids within a hydrological system that can be extracted and utilized. The proposed methodological approach is demonstrated on the basis on two case studies. In the first example, I analyzed a series of 2D seismic profile sections through the Alberta sedimentary basin on the eastern edge of the Canadian Rocky Mountains. In the second application, a 3D seismic volume is characterized in the surroundings of a geothermal borehole, located in the central part of the Polish basin. Both sites were investigated with the modified and improved stacking attribute analyses. The results provide recommendations for the planning of future geothermal plants in both study areas.