Refine
Has Fulltext
- no (18) (remove)
Year of publication
- 2018 (18) (remove)
Document Type
- Other (18) (remove)
Language
- English (18)
Is part of the Bibliography
- yes (18)
Keywords
- thermally stimulated discharge (2)
- 7924 (1)
- 7934 (1)
- 7959 (1)
- CT (1)
- Clock Tree Implementation (1)
- Curie transition (1)
- Hierarchical Design (1)
- LDPE nanocomposites (1)
- P(VDF-TrFE-CFE) terpolymer (1)
Institute
- Institut für Physik und Astronomie (18) (remove)
We consider chimera states in a one-dimensional medium of nonlinear nonlocally coupled phase oscillators. Stationary inhomogeneous solutions of the Ott-Antonsen equation for a complex order parameter that correspond to fundamental chimeras have been constructed. Stability calculations reveal that only some of these states are stable. The direct numerical simulation has shown that these structures under certain conditions are transformed to breathing chimera regimes because of the development of instability. Further development of instability leads to turbulent chimeras.
Participants of the 2017 European Space Weather Week in Ostend, Belgium, discussed the stakeholder requirements for space weather-related models. It was emphasized that stakeholders show an increased interest in space weather-related models. Participants of the meeting discussed particular prediction indicators that can provide first-order estimates of the impact of space weather on engineering systems.
We describe how inversion symmetry separation of electronic state manifolds in resonant inelastic soft X-ray scattering (RIXS) can be applied to probe excited-state dynamics with compelling selectivity. In a case study of Fe L3-edge RIXS in the ferricyanide complex Fe(CN)63−, we demonstrate with multi-configurational restricted active space spectrum simulations how the information content of RIXS spectral fingerprints can be used to unambiguously separate species of different electronic configurations, spin multiplicities, and structures, with possible involvement in the decay dynamics of photo-excited ligand-to-metal charge-transfer. Specifically, we propose that this could be applied to confirm or reject the presence of a hitherto elusive transient Quartet species. Thus, RIXS offers a particular possibility to settle a recent controversy regarding the decay pathway, and we expect the technique to be similarly applicable in other model systems of photo-induced dynamics.
This book aims at understanding the diversity of planetary and lunar magnetic fields and their interaction with the solar wind. A synergistic interdisciplinary approach combines newly developed tools for data acquisition and analysis, computer simulations of planetary interiors and dynamos, models of solar wind interaction, measurement of terrestrial rocks and meteorites, and laboratory investigations. The following chapters represent a selection of some of the scientific findings derived by the 22 projects within the DFG Priority Program Planetary Magnetism" (PlanetMag). This introductory chapter gives an overview of the individual following chapters, highlighting their role in the overall goals of the PlanetMag framework. The diversity of the different contributions reflects the wide range of magnetic phenomena in our solar system. From the program we have excluded magnetism of the sun, which is an independent broad research discipline, but include the interaction of the solar wind with planets and moons. Within the subsequent 13 chapters of this book, the authors review the field centered on their research topic within PlanetMag. Here we shortly introduce the content of all the subsequent chapters and outline the context in which they should be seen.
Previous work has shown that surface modification with orthophosphoric acid can significantly enhance the charge stability on polypropylene (PP) surface by generating deeper traps. In the present study, thermally stimulated potential-decay measurements revealed that the chemical treatment may also significantly increase the number of available trapping sites on the surface. Thus, as a consequence, the so-called "cross-over" phenomenon, which is observed on as-received and thermally treated PP electrets, may be overcome in a certain range of initial charge densities. Furthermore, the discharge behavior of chemically modified samples indicates that charges can be injected from the treated surface into the bulk, and/or charges of opposite polarity can be pulled from the rear electrode into the bulk at elevated temperatures and at the high electric fields that are caused by the deposited charges. In the bulk, a lack of deep traps causes rapid charge decay already in the temperature range around 95 degrees C.
The influence of chemical composition and crystallisation conditions on the ferroelectric and paraelectric phases and the resulting morphology in Poly(vinylidene fluoride-trifluoroethylene-chlorofluoroethylene) (P(VDF-TrFE-CFE)) terpolymer films with 55.4/37.2/7.3 mol% or with 62.2/29.4/8.4 mol% of VDF/TrFE/CFE was studied. Poly(vinylidene fluoride trifluoroethylene) (P(VDF-TrFE)) with 75/25 mol% VDF/TrFE was employed as reference material. Fourier-Transform Infrared Spectroscopy (FTIR) was used to determine the fractions of the relevant terpolymer phases, and X-Ray Diffraction (XRD) was employed to assess the crystalline morphology. The FTIR results show an increase of the fraction of paraelectric phases after annealing. On the other hand, XRD results indicate a more stable paraelectric phase in the terpolymer with higher CFE content.
Published results on LDPE/MgO nanocomposites (3wt%) show that they promise to be good electrical-insulation materials. In this work, the nanocomposites are examined as a potential (ferro-)electret material as well. Isothermal surface-potential decay measurements show that charged LDPE/MgO films still exhibit significant surface potentials after heating for 4 hours at 80 degrees C, which suggests good capabilities of LDPE/MgO nanocomposites to hold electric charges of both polarities. Open-tubular-channel ferroelectrets prepared from LDPE/MgO nanocomposite films show significant piezoelectricity with d(33) coefficients of about 20 pC/N after charging and are stable up to temperatures of at least 80 degrees C. Thus LDPE/MgO nanocomposites may become available as a new ferroelectret material. To increase their d(33) coefficients, it is desirable to optimize the charging conditions and the ferroelectret structure.
A hybrid design approach of the hierarchical physical implementation design flow is presented and demonstrated on a fault-tolerant low-power multiprocessor system. The proposed flow allows to implement selected submodules in parallel with contrary requirements such as identical placement and individual block implementation. The overall system contains four Leon2 cores and communicates via the Waterbear framework and supports Adaptive Voltage Scaling (AVS) functionality. Three of the processor core variants are derived from the first baseline reference core but implemented individually at block level based on their clock tree specification. The chip is prepared for space applications and designed with triple modular redundancy (TMR) for control parts. The low-power performance is enabled by contemporary power and clock management control. An ASIC is fabricated in a low-power 0.13 mu m BiCMOS technology process node.
Microstructure Characterisation of Advanced Materials via 2D and 3D X-Ray Refraction Techniques
(2018)
3D imaging techniques have an enormous potential to understand the microstructure, its evolution, and its link to mechanical, thermal, and transport properties. In this conference paper we report the use of a powerful, yet not so wide-spread, set of X-ray techniques based on refraction effects. X-ray refraction allows determining internal specific surface (surface per unit volume) in a non-destructive fashion, position and orientation sensitive, and with a nanometric detectability. We demonstrate showcases of ceramics and composite materials, where microstructural parameters could be achieved in a way unrivalled even by high-resolution techniques such as electron microscopy or computed tomography. We present in situ analysis of the damage evolution in an Al/Al2O3 metal matrix composite during tensile load and the identification of void formation (different kinds of defects, particularly unsintered powder hidden in pores, and small inhomogeneity’s like cracks) in Ti64 parts produced by selective laser melting using synchrotron X-ray refraction radiography and tomography.