Refine
Document Type
- Doctoral Thesis (11)
- Article (5)
- Postprint (1)
- Review (1)
Language
- English (18)
Is part of the Bibliography
- yes (18)
Keywords
- Paläoklimatologie (3)
- Asia (2)
- Paleoclimatology (2)
- Paleogene (2)
- Pamir (2)
- Stratigraphy (2)
- magnetostratigraphy (2)
- westerlies (2)
- Angriffserkennung (1)
- Anomalieerkennung (1)
The establishment and evolution of the Asian monsoons and arid interior have been linked to uplift of the Tibetan Plateau, retreat of the inland proto-Paratethys Sea and global cooling during the Cenozoic. However, the respective role of these driving mechanisms remains poorly constrained. This is partly due to a lack of continental records covering the key Eocene epoch marked by the onset of Tibetan Plateau uplift, proto-Paratethys Sea incursions and long-term global cooling. In this study, we reconstruct paleoenvironments in the Xining Basin, NE Tibet, to show a long-term drying of the Asian continental interior from the early Eocene to the Oligocene. Superimposed on this trend are three alternations between arid mudflat and wetter saline lake intervals, which are interpreted to reflect atmospheric moisture fluctuations in the basin. We date these fluctuations using magnetostratigraphy and the radiometric age of an intercalated tuff layer. The first saline lake interval is tentatively constrained to the late Paleocene-early Eocene. The other two are firmly dated between similar to 46 Ma (top magnetochron C21n) and similar to 41 Ma (base C18r) and between similar to 40 Ma (base C18n) and similar to 37 Ma (top C17n). Remarkably, these phases correlate in time with highstands of the proto-Paratethys Sea. This strongly suggests that these sea incursions enhanced westerly moisture supply as far inland as the Xining Basin. We conclude that the proto-Paratethys Sea constituted a key driver of Asian climate and should be considered in model and proxy interpretations. (C) 2019 Elsevier B.V. All rights reserved.
The fall into the Oligocene icehouse is marked by a steady decline in global temperature with punctuated cooling at the Eocene-Oligocene transition, both of which are well documented in the marine realm. However, the chronology and mechanisms of cooling on land remain unclear. Here, we use clumped isotope thermometry on northeastern Tibetan continental carbonates to reconstruct a detailed Paleogene surface temperature record for the Asian continental interior, and correlate this to an enhanced pollen data set. Our results show two successive dramatic (>9 degrees C) temperature drops, at 37 Ma and at 33.5 Ma. These large-magnitude decreases in continental temperatures can only be explained by a combination of both regional cooling and shifts of the rainy season to cooler months, which we interpret to reflect a decline of monsoonal intensity. Our results suggest that the response of Asian surface temperatures and monsoonal rainfall to the steady decline of atmospheric CO2 and global temperature through the late Eocene was nonlinear and occurred in two steps separated by a period of climatic instability. Our results support the onset of the Antarctic Circumpolar Current coeval to the Oligocene isotope event 1 (Oi-1) glaciation at 33.5 Ma, reshaping the distribution of surface heat worldwide; however, the origin of the 37 Ma cooling event remains less clear.
The origins and development of the arid and highly seasonal steppe-desert biome in Central Asia, the largest of its kind in the world, remain largely unconstrained by existing records. It is unclear how Cenozoic climatic, geological, and biological forces, acting at diverse spatial and temporal scales, shaped Central Asian ecosystems through time. Our synthesis shows that the Central Asian steppe-desert has existed since at least Eocene times but experienced no less than two regime shifts, one at the Eocene-Oligocene Transition and one in the mid-Miocene. These shifts separated three successive "stable states," each characterized by unique floral and faunal structures. Past responses to disturbance in the Asian steppe-desert imply that modern ecosystems are unlikely to recover their present structures and diversity if forced into a new regime. This is of concern for Asian steppes today, which are being modified for human use and lost to desertification at unprecedented rates.
The timing and mechanisms of the Cretaceous sea incursions into Central Asia are still poorly constrained. We provide a new chronostratigraphic framework based on biostratigraphy and magnetostratigraphy together with detailed paleoenvironmental analyses of Cretaceous records of the proto-Paratethys Sea fluctuations in the Tajik and Tarim basins. The Early Cretaceous marine incursion in the western Tajik Basin was followed by major marine incursions during the Cenomanian (ca. 100 Ma) and Santonian (ca. 86 Ma) that reached far into the eastern Tajik and Tarim basins. These marine incursions were separated by a Turonian-Coniacian (ca. 92-86 Ma) regression. Basin-wide tectonic subsidence analyses imply that the Early Cretaceous sea incursion into the Tajik Basin was related to increased Pamir tectonism. We find that thrusting along the northern edge of the Pamir at ca. 130-90 Ma resulted in increased subsidence in a retro-arc basin setting. This tectonic event and coeval eustatic highstand resulted in the maximum observed geographic extent of the sea during the Cenomanian (ca. 100 Ma). The following Turonian-Coniacian (ca. 92-86 Ma) major regression, driven by eustasy, coincides with a sharp slowdown in tectonic subsidence during the late orogenic unloading period with limited thrusting. The Santonian (ca. 86 Ma) major sea incursion was likely controlled by eustasy as evidenced by the coeval fluctuations in the west Siberian Basin. An early Maastrichtian cooling (ca. 71-70 Ma), potentially connected to global Late Cretaceous trends, is inferred from the replacement of mollusk-rich limestones by bryozoan- and echinoderm-rich limestones.
The northward indentation of the Pamir salient into the Tarim basin at the western syntaxis of the India-Asia collision zone is the focus of controversial models linking lithospheric to surface and atmospheric processes. Here we report on tectonic events recorded in the most complete and best-dated sedimentary sequences from the western Tarim basin flanking the eastern Pamir (the Aertashi section), based on sedimentologic, provenance, and magnetostratigraphic analyses. Increased tectonic subsidence and a shift from marine to continental fluvio-deltaic deposition at 41Ma indicate that far-field deformation from the south started to affect the Tarim region. A sediment accumulation hiatus from 24.3 to 21.6Ma followed by deposition of proximal conglomerates is linked to fault propagation into the Tarim basin. From 21.6 to 15.0Ma, increasing accumulation rates of fining upward clastics is interpreted as the expression of a major dextral transtensional system linking the Kunlun to the Tian Shan ahead of the northward Pamir indentation. At 15.0Ma, the appearance of North Pamir-sourced conglomerates followed at 11Ma by Central Pamir-sourced volcanics coincides with a shift to E-W compression, clockwise vertical-axis rotations and the onset of growth strata associated with the activation of the local east vergent Qimugen thrust wedge. Together, this enables us to interpret that Pamir indentation into Tarim had started by 24.3Ma, reached the study location by 15.0Ma and had passed it by 11Ma, providing kinematic constraints on proposed tectonic models involving intracontinental subduction and delamination.
Paleogene evolution and demise of the proto-Paratethys Sea in Central Asia (Tarim and Tajik basins)
(2019)
The proto-Paratethys Sea covered a vast area extending from the Mediterranean Tethys to the Tarim Basin in western China during Cretaceous and early Paleogene. Climate modelling and proxy studies suggest that Asian aridification has been governed by westerly moisture modulated by fluctuations of the proto-Paratethys Sea. Transgressive and regressive episodes of the proto-Paratethys Sea have been previously recognized but their timing, extent and depositional environments remain poorly constrained. This hampers understanding of their driving mechanisms (tectonic and/or eustatic) and their contribution to Asian aridification. Here, we present a new chronostratigraphic framework based on biostratigraphy and magnetostratigraphy as well as a detailed palaeoenvironmental analysis for the Paleogene proto-Paratethys Sea incursions in the Tajik and Tarim basins. This enables us to identify the major drivers of marine fluctuations and their potential consequences on Asian aridification. A major regional restriction event, marked by the exceptionally thick (<= 400 m) shelf evaporites is assigned a Danian-Selandian age (ca. 63-59 Ma) in the Aertashi Formation. This is followed by the largest recorded proto-Paratethys Sea incursion with a transgression estimated as early Thanetian (ca. 59-57 Ma) and a regression within the Ypresian (ca. 53-52 Ma), both within the Qimugen Formation. The transgression of the next incursion in the Kalatar and Wulagen formations is now constrained as early Lutetian (ca. 47-46 Ma), whereas its regression in the Bashibulake Formation is constrained as late Lutetian (ca. 41 Ma) and is associated with a drastic increase in both tectonic subsidence and basin infilling. The age of the final and least pronounced sea incursion restricted to the westernmost margin of the Tarim Basin is assigned as Bartonian-Priabonian (ca. 39.7-36.7 Ma). We interpret the long-term westward retreat of the proto-Paratethys Sea starting at ca. 41 Ma to be associated with far-field tectonic effects of the Indo-Asia collision and Pamir/Tibetan plateau uplift. Short-term eustatic sea level transgressions are superimposed on this long-term regression and seem coeval with the transgression events in the other northern Peri-Tethyan sedimentary provinces for the 1st and 2nd sea incursions. However, the 3rd sea incursion is interpreted as related to tectonism. The transgressive and regressive intervals of the proto-Paratethys Sea correlate well with the reported humid and arid phases, respectively in the Qaidam and Xining basins, thus demonstrating the role of the proto-Paratethys Sea as an important moisture source for the Asian interior and its regression as a contributor to Asian aridification.
Unlike today’s prevailing terrestrial features, the geologic past of Central Asia witnessed marine environments and conditions as well. A vast, shallow sea, known as proto-Paratethys, extended across Eurasia from the Mediterranean Tethys to the Tarim Basin in western China during Cretaceous to Paleogene times. This sea formed about 160 million years ago (during Jurassic times) when the waters of the Tethys Ocean flooded into Eurasia. It drastically retreated to the west and became isolated as the Paratethys during the Late Eocene-Oligocene (ca. 34 Ma).
Having well-constrained timing and paleogeography for the Cretaceous-Paleogene proto-Paratethys sea incursions in Central Asia is essential to properly understand and distinguish the controlling mechanisms and their link to Asian paleoenvironmental and paleoclimatic change. The Cretaceous-Paleogene tectonic evolution of the Pamir and Tibet and their far-field effects play a significant role on the sedimentological and structural evolution of the Central Asian basins and on the evolution of the proto-Paratethys sea fluctuations as well. Comparing the records of the sea incursions to the tectonic and eustatic events has paramount importance to reveal the controlling mechanisms behind the sea incursions. However, due to inaccuracies in the dating of rocks (mostly continental rocks and marine rocks with benthic microfossils providing low-resolution biostratigraphic constraints) and conflicting results, there has been no consensus on the timing of the sea incursions and interpretation of their records has been in question. Here, we present a new chronostratigraphic framework based on biostratigraphy and magnetostratigraphy as well as a detailed paleoenvironmental analysis for the Cretaceous and Paleogene proto-Paratethys Sea incursions in the Tajik and Tarim basins, in Central Asia. This enables us to identify the major drivers of marine fluctuations and their potential consequences on regional and global climate, particularly Asian aridification and the global carbon cycle perturbations such as the Paleocene-Eocene Thermal Maximum (PETM). To estimate the paleogeographic evolution of the proto-Paratethys Sea, the refined age constraints and detailed paleoenvironmental interpretations are combined with successive paleogeographic maps. Regional coastlines and depositional environments during the Cretaceous-Paleogene sea advances and retreats were drawn based on the results of this thesis and integrated with existing literature to generate new paleogeographic maps.
Before its final westward retreat in the Eocene, a total of six Cretaceous and Paleogene major sea incursions have been distinguished from the sedimentary records of the Tajik and Tarim basins in Central Asia. All have been studied and documented here.
We identify the presence of marine conditions already in the Early Cretaceous in the western Tajik Basin, followed by the Cenomanian (ca. 100 Ma) and Santonian (ca. 86 Ma) major marine incursions far into the eastern Tajik and Tarim basins separated by a Turonian-Coniacian (ca. 92-86 Ma) regression. Basin-wide tectonic subsidence analyses imply that the Early Cretaceous invasion of the sea into the Tajik Basin is related to increased Pamir tectonism (at ca. 130 – 90 Ma) in a retro-arc basin setting inferred to be linked to collision and subduction. This tectonic event mainly governed the Cenomanian (ca. 100 Ma) sea incursion in conjunction with a coeval global eustatic high resulting in the maximum geographic extent of the sea. The following Turonian-Coniacian (ca. 92-86 Ma) major regression, driven by eustasy, coincides with a sharp slowdown in tectonic subsidence related to a regime change in Pamir tectonism from compression to extension. The Santonian (ca. 86 Ma) major sea incursion was more likely controlled dominantly by eustasy as also evidenced by the coeval fluctuations in the west Siberian Basin. During the early Maastrichtian, the global Late Cretaceous cooling is inferred from the disappearance of mollusk-rich limestones and the dominance of bryozoan-rich and echinoderm-rich limestones in the Tajik Basin documenting the first evidence for the Late Cretaceous cooling event in Central Asia.
Following the last Cretaceous sea incursion, a major regional restriction event, marked by the exceptionally thick (≤ 400 m) shelf evaporites is assigned a Danian-Selandian age (ca. 63-59 Ma). This is followed by the largest recorded proto-Paratethys sea incursion with a transgression estimated as early Thanetian (ca. 59-57 Ma) and a regression within the Ypresian (ca. 53-52 Ma). The transgression of the next incursion is now constrained as early Lutetian (ca. 47-46 Ma), whereas its regression is constrained as late Lutetian (ca. 41 Ma) and is associated with a drastic increase in both tectonic subsidence and basin infilling. The age of the final and least pronounced sea incursion restricted to the westernmost margin of the Tarim Basin is assigned as Bartonian–Priabonian (ca. 39.7-36.7 Ma). We interpret the long-term westward retreat of the proto-Paratethys Sea starting at ca. 41 Ma to be associated with far-field tectonic effects of the Indo-Asia collision and Pamir/Tibetan plateau uplift. Short-term eustatic sea level transgressions are superimposed on this long-term regression and seem coeval with the transgression events in the other northern Peri-Tethyan sedimentary provinces for the 1st and 2nd Paleogene sea incursions. However, the last Paleogene sea incursion is interpreted as related to tectonism. The transgressive and regressive intervals of the proto-Paratethys Sea correlate well with the reported humid and arid phases, respectively in the Qaidam and Xining basins, thus demonstrating the role of the proto-Paratethys Sea as an important moisture source for the Asian interior and its regression as a contributor to Asian aridification.
We lastly study the mechanics, relative contribution and preservation efficiency of ancient epicontinental seas as carbon sinks with new and existing data, using organic rich (sapropel) deposits dated to the PETM from the extensive epicontinental proto-Paratethys and West Siberian seas. We estimate ca. 1390±230 Gt organic C burial, a substantial amount compared to previously estimated global total excess organic C burial (ca. 1700-2900 Gt) is focused in the proto-Paratethys and West Siberian seas alone. We also speculate that enhanced organic carbon burial later over much of the proto-Paratethys (and later Paratethys) basin (during the deposition of the Kuma Formation and Maikop series, repectively) may have majorly contributed to drawdown of atmospheric carbon dioxide before and during the EOT cooling and glaciation of Antarctica. For past periods with smaller epicontinental seas, the effectiveness of this negative carbon cycle feedback was arguably diminished, and the same likely applies to the present-day.
Concrete-operational thinking depicts an important aspect of cognitive development. A promising approach in promoting these skills is the instruction of strategies. The construction of such instructional programs requires insights into the mental operations involved in problem-solving. In the present paper, we address the question to which extent variations of the effect of isolated and combined mental operations (strategies) on correct solution of concrete-operational concepts can be observed. Therefore, a cross-sectional design was applied. The use of mental operations was measured by thinking-aloud reports from 80 first- and second-graders (N = 80) while solving tasks depicting concrete-operational thinking. Concrete-operational thinking was assessed using the subscales conservation of numbers, classification and sequences of the TEKO. The verbal reports were transcribed and coded with regard to the mental operations applied per task. Data analyses focused on tasks level, resulting in the analyses of N = 240 tasks per subscale. Differences regarding the contribution of isolated and combined mental operations (strategies) to correct solution were observed. Thereby, the results indicate the necessity of selection and integration of appropriate mental operations as strategies. The results offer insights in involved mental operations while solving concrete-operational tasks and depict a contribution to the construction of instructional programs.
The East Asian monsoons characterize the modern-day Asian climate, yet their geological history and driving mechanisms remain controversial. The southeasterly summer monsoon provides moisture, whereas the northwesterly winter monsoon sweeps up dust from the arid Asian interior to form the Chinese Loess Plateau. The onset of this loess accumulation, and therefore of the monsoons, was thought to be 8 million years ago (Ma). However, in recent years these loess records have been extended further back in time to the Eocene (56-34 Ma), a period characterized by significant changes in both the regional geography and global climate. Yet the extent to which these reconfigurations drive atmospheric circulation and whether the loess-like deposits are monsoonal remains debated. In this thesis, I study the terrestrial deposits of the Xining Basin previously identified as Eocene loess, to derive the paleoenvironmental evolution of the region and identify the geological processes that have shaped the Asian climate.
I review dust deposits in the geological record and conclude that these are commonly represented by a mix of both windblown and water-laid sediments, in contrast to the pure windblown material known as loess. Yet by using a combination of quartz surface morphologies, provenance characteristics and distinguishing grain-size distributions, windblown dust can be identified and quantified in a variety of settings. This has important implications for tracking aridification and dust-fluxes throughout the geological record.
Past reversals of Earth’s magnetic field are recorded in the deposits of the Xining Basin and I use these together with a dated volcanic ash layer to accurately constrain the age to the Eocene period. A combination of pollen assemblages, low dust abundances and other geochemical data indicates that the early Eocene was relatively humid suggesting an intensified summer monsoon due to the warmer greenhouse climate at this time. A subsequent shift from predominantly freshwater to salt lakes reflects a long-term aridification trend possibly driven by global cooling and the continuous uplift of the Tibetan Plateau. Superimposed on this aridification are wetter intervals reflected in more abundant lake deposits which correlate with highstands of the inland proto-Paratethys Sea. This sea covered the Eurasian continent and thereby provided additional moisture to the winter-time westerlies during the middle to late Eocene.
The long-term aridification culminated in an abrupt shift at 40 Ma reflected by the onset of windblown dust, an increase in steppe-desert pollen, the occurrence of high-latitude orbital cycles and northwesterly winds identified in deflated salt deposits. Together, these indicate the onset of a Siberian high atmospheric pressure system driving the East Asian winter monsoon as well as dust storms and was triggered by a major sea retreat from the Asian interior. These results therefore show that the proto-Paratethys Sea, though less well recognized than the Tibetan Plateau and global climate, has been a major driver in setting up the modern-day climate in Asia.
The shallow Earth’s layers are at the interplay of many physical processes: some being driven by atmospheric forcing (precipitation, temperature...) whereas others take their origins at depth, for instance ground shaking due to seismic activity. These forcings cause the subsurface to continuously change its mechanical properties, therefore modulating the strength of the surface geomaterials and hydrological fluxes. Because our societies settle and rely on the layers hosting these time-dependent properties, constraining the hydro-mechanical dynamics of the shallow subsurface is crucial for our future geographical development. One way to investigate the ever-changing physical changes occurring under our feet is through the inference of seismic velocity changes from ambient noise, a technique called seismic interferometry. In this dissertation, I use this method to monitor the evolution of groundwater storage and damage induced by earthquakes. Two research lines are investigated that comprise the key controls of groundwater recharge in steep landscapes and the predictability and duration of the transient physical properties due to earthquake ground shaking. These two types of dynamics modulate each other and influence the velocity changes in ways that are challenging to disentangle. A part of my doctoral research also addresses this interaction. Seismic data from a range of field settings spanning several climatic conditions (wet to arid climate) in various seismic-prone areas are considered. I constrain the obtained seismic velocity time-series using simple physical models, independent dataset, geophysical tools and nonlinear analysis. Additionally, a methodological development is proposed to improve the time-resolution of passive seismic monitoring.
Earth's climate varies continuously across space and time, but humankind has witnessed only a small snapshot of its entire history, and instrumentally documented it for a mere 200 years. Our knowledge of past climate changes is therefore almost exclusively based on indirect proxy data, i.e. on indicators which are sensitive to changes in climatic variables and stored in environmental archives. Extracting the data from these archives allows retrieval of the information from earlier times. Obtaining accurate proxy information is a key means to test model predictions of the past climate, and only after such validation can the models be used to reliably forecast future changes in our warming world. The polar ice sheets of Greenland and Antarctica are one major climate archive, which record information about local air temperatures by means of the isotopic composition of the water molecules embedded in the ice. However, this temperature proxy is, as any indirect climate data, not a perfect recorder of past climatic variations. Apart from local air temperatures, a multitude of other processes affect the mean and variability of the isotopic data, which hinders their direct interpretation in terms of climate variations. This applies especially to regions with little annual accumulation of snow, such as the Antarctic Plateau. While these areas in principle allow for the extraction of isotope records reaching far back in time, a strong corruption of the temperature signal originally encoded in the isotopic data of the snow is expected. This dissertation uses observational isotope data from Antarctica, focussing especially on the East Antarctic low-accumulation area around the Kohnen Station ice-core drilling site, together with statistical and physical methods, to improve our understanding of the spatial and temporal isotope variability across different scales, and thus to enhance the applicability of the proxy for estimating past temperature variability. The presented results lead to a quantitative explanation of the local-scale (1–500 m) spatial variability in the form of a statistical noise model, and reveal the main source of the temporal variability to be the mixture of a climatic seasonal cycle in temperature and the effect of diffusional smoothing acting on temporally uncorrelated noise. These findings put significant limits on the representativity of single isotope records in terms of local air temperature, and impact the interpretation of apparent cyclicalities in the records. Furthermore, to extend the analyses to larger scales, the timescale-dependency of observed Holocene isotope variability is studied. This offers a deeper understanding of the nature of the variations, and is crucial for unravelling the embedded true temperature variability over a wide range of timescales.
Carbonates carried in subducting slabs may play a major role in sourcing and storing carbon in the deep Earth’s interior. Current estimates indicate that between 40 to 66 million tons of carbon per year enter subduction zones, but it is uncertain how much of it reaches the lower mantle. It appears that most of this carbon might be extracted from subducting slabs at the mantle wedge and only a limited amount continues deeper and eventually reaches the deep mantle. However, estimations on deeply subducted carbon broadly range from 0.0001 to 52 million tons of carbon per year. This disparity is primarily due to the limited understanding of the survival of carbonate minerals during their transport to deep mantle conditions. Indeed, carbon has very low solubility in mantle silicates, therefore it is expected to be stored primarily in accessory phases such as carbonates. Among those carbonates, magnesite (MgCO3), as a single phase, is the most stable under all mantle conditions. However, experimental investigation on the stability of magnesite in contact with SiO2 at lower mantle conditions suggests that magnesite is stable only along a cold subducted slab geotherm. Furthermore, our understanding of magnesite’s stability when interacting with more complex mantle silicate phases remains incomplete. In the first part of this dissertation, laser-heated diamond anvil cells and multi-anvil apparatus experiments were performed to investigate the stability of magnesite in contact with iron-bearing mantle silicates. Sub-solidus reactions, melting, decarbonation and diamond formation were examined from shallow to mid-lower mantle conditions (25 to 68 GPa; 1300 to 2000 K). Multi-anvil experiments at 25 GPa show the formation of carbonate-rich melt, bridgmanite, and stishovite with melting occurring at a temperature corresponding to all geotherms except the coldest one. In situ X-ray diffraction, in laser-heating diamond anvil cells experiments, shows crystallization of bridgmanite and stishovite but no melt phase was detected in situ at high temperatures. To detect decarbonation phases such as diamond, Raman spectroscopy was used. Crystallization of diamonds is observed as a sub-solidus process even at temperatures relevant and lower than the coldest slab geotherm (1350 K at 33 GPa). Data obtained from this work suggest that magnesite is unstable in contact with the surrounding peridotite mantle in the upper-most lower mantle. The presence of magnesite instead induces melting under oxidized conditions and/or foster diamond formation under more reduced conditions, at depths ∼700 km. Consequently, carbonates will be removed from the carbonate-rich slabs at shallow lower mantle conditions, where subducted slabs can stagnate. Therefore, the transport of carbonate to deeper depths will be restricted, supporting the presence of a barrier for carbon subduction at the top of the lower mantle. Moreover, the reduction of magnesite, forming diamonds provides additional evidence that super-deep diamond crystallization is related to the reduction of carbonates or carbonated-rich melt.
The second part of this dissertation presents the development of a portable laser-heating system optimized for X-ray emission spectroscopy (XES) or nuclear inelastic scattering (NIS) spectroscopy with signal collection at near 90◦. The laser-heated diamond anvil cell is the only static pressure device that can replicate the pressure and temperatures of the Earth’s lower mantle and core. The high temperatures are reached by using high-powered lasers focused on the sample contained between the diamond anvils. Moreover, diamonds’ transparency to X-rays enables in situ X-ray spectroscopy measurements that can probe the sample under high-temperature and high-pressure conditions. Therefore, the development of portable laser-heating systems has linked high-pressure and temperature research with high-resolution X-ray spectroscopy techniques to synchrotron beamlines that do not have a dedicated, permanent, laser-heating system. A general description of the system is provided, as well as details on the use of a parabolic mirror as a reflective imaging objective for on-axis laser heating and radiospectrometric temperature measurements with zero attenuation of incoming X-rays. The parabolic mirror improves the accuracy of temperature measurements free from chromatic aberrations in a wide spectral range and its perforation permits in situ X-rays measurement at synchrotron facilities. The parabolic mirror is a well-suited alternative to refractive objectives in laser heating systems, which will facilitate future applications in the use of CO2 lasers.
Aptamers are single-stranded DNA (ssDNA) or RNA molecules that can bind specifically and with high affinity to target molecules due to their unique three-dimensional structure. For this reason, they are often compared to antibodies and sometimes even referred to as “chemical antibodies”. They are simple and inexpensive to synthesize, easy to modify, and smaller than conventional antibodies. Enzymes, especially hydrolases, are interesting targets in this context. This class of enzymes is capable of hydrolytically cleaving various macromolecules such as proteins, as well as smaller molecules such as antibiotics. Hence, they play an important role in many biological processes including diseases and their treatment. Hydrolase detection as well as the understanding of their function is therefore of great importance for diagnostics and therapy. Due to their various desirable features compared to antibodies, aptamers are being discussed as alternative agents for analytical and diagnostic use in various applications. The use of aptamers in therapy is also frequently investigated, as the binding of aptamers can have effects on the catalytic activity, protein-protein interactions, or proteolytic cascades. Aptamers are generated by an in vitro selection process. Potential aptamer candidates are selected from a pool of enriched nucleic acid sequences with affinity to the target, and their binding affinity and specificity is investigated. This is one of the most important steps in aptamer generation to obtain specific aptamers with high affinity for use in analytical and diagnostic applications. The binding properties or binding domains and their effects on enzyme functions form the basis for therapeutic applications.
In this work, the binding properties of DNA aptamers against two different hydrolases were investigated. In view of their potential utility for analytical methods, aptamers against human urokinase (uPA) and New Delhi metallo-β-lactamase-1 (NDM-1) were evaluated for their binding affinity and specificity using different methods. Using the uPA aptamers, a protocol for measuring the binding kinetics of an aptamer-protein-interaction by surface plasmon resonance spectroscopy (SPR) was developed. Based on the increased expression of uPA in different types of cancer, uPA is discussed as a prognostic and diagnostic tumor marker. As uPA aptamers showed different binding sites on the protein, microtiter plate-based aptamer sandwich assay systems for the detection of uPA were developed. Because of the function of urokinase in cancer cell proliferation and metastasis, uPA is also discussed as a therapeutic target. In this regard, the different binding sites of aptamers showed different effects on uPA function. In vitro experiments demonstrated both inhibition of uPA binding to its receptor as well as the inhibition of uPA catalytic activity for different aptamers. Thus, in addition to their specificity and affinity for their targets, the utility of the aptamers for potential diagnostic and therapeutic applications was demonstrated. First, as an alternative inhibitor of human urokinase for therapeutic purposes, and second, as valuable recognition molecules for the detection of urokinase, as a prognostic and diagnostic marker for cancer, and for NDM-1 to detect resistance to carbapenem antibiotics.
The rapid development and integration of Information Technologies over the last decades influenced all areas of our life, including the business world. Yet not only the modern enterprises become digitalised, but also security and criminal threats move into the digital sphere. To withstand these threats, modern companies must be aware of all activities within their computer networks.
The keystone for such continuous security monitoring is a Security Information and Event Management (SIEM) system that collects and processes all security-related log messages from the entire enterprise network. However, digital transformations and technologies, such as network virtualisation and widespread usage of mobile communications, lead to a constantly increasing number of monitored devices and systems. As a result, the amount of data that has to be processed by a SIEM system is increasing rapidly. Besides that, in-depth security analysis of the captured data requires the application of rather sophisticated outlier detection algorithms that have a high computational complexity. Existing outlier detection methods often suffer from performance issues and are not directly applicable for high-speed and high-volume analysis of heterogeneous security-related events, which becomes a major challenge for modern SIEM systems nowadays.
This thesis provides a number of solutions for the mentioned challenges. First, it proposes a new SIEM system architecture for high-speed processing of security events, implementing parallel, in-memory and in-database processing principles. The proposed architecture also utilises the most efficient log format for high-speed data normalisation. Next, the thesis offers several novel high-speed outlier detection methods, including generic Hybrid Outlier Detection that can efficiently be used for Big Data analysis. Finally, the special User Behaviour Outlier Detection is proposed for better threat detection and analysis of particular user behaviour cases.
The proposed architecture and methods were evaluated in terms of both performance and accuracy, as well as compared with classical architecture and existing algorithms. These evaluations were performed on multiple data sets, including simulated data, well-known public intrusion detection data set, and real data from the large multinational enterprise. The evaluation results have proved the high performance and efficacy of the developed methods.
All concepts proposed in this thesis were integrated into the prototype of the SIEM system, capable of high-speed analysis of Big Security Data, which makes this integrated SIEM platform highly relevant for modern enterprise security applications.
Organic bulk heterojunction (BHJ) solar cells based on polymer:fullerene blends are a promising alternative for a low-cost solar energy conversion. Despite significant improvements of the power conversion efficiency in recent years, the fundamental working principles of these devices are yet not fully understood. In general, the current output of organic solar cells is determined by the generation of free charge carriers upon light absorption and their transport to the electrodes in competition to the loss of charge carriers due to recombination.
The object of this thesis is to provide a comprehensive understanding of the dynamic processes and physical parameters determining the performance. A new approach for analyzing the characteristic current-voltage output was developed comprising the experimental determination of the efficiencies of charge carrier generation, recombination and transport, combined with numerical device simulations.
Central issues at the beginning of this work were the influence of an electric field on the free carrier generation process and the contribution of generation, recombination and transport to the current-voltage characteristics. An elegant way to directly measure the field dependence of the free carrier generation is the Time Delayed Collection Field (TDCF) method. In TDCF charge carriers are generated by a short laser pulse and subsequently extracted by a defined rectangular voltage pulse. A new setup was established with an improved time resolution compared to former reports in literature. It was found that charge generation is in general independent of the electric field, in contrast to the current view in literature and opposed to the expectations of the Braun-Onsager model that was commonly used to describe the charge generation process. Even in cases where the charge generation was found to be field-dependend, numerical modelling showed that this field-dependence is in general not capable to account for the voltage dependence of the photocurrent. This highlights the importance of efficient charge extraction in competition to non-geminate recombination, which is the second objective of the thesis.
Therefore, two different techniques were combined to characterize the dynamics and efficiency of non-geminate recombination under device-relevant conditions. One new approach is to perform TDCF measurements with increasing delay between generation and extraction of charges. Thus, TDCF was used for the first time to measure charge carrier generation, recombination and transport with the same experimental setup. This excludes experimental errors due to different measurement and preparation conditions and demonstrates the strength of this technique. An analytic model for the description of TDCF transients was developed and revealed the experimental conditions for which reliable results can be obtained. In particular, it turned out that the $RC$ time of the setup which is mainly given by the sample geometry has a significant influence on the shape of the transients which has to be considered for correct data analysis.
Secondly, a complementary method was applied to characterize charge carrier recombination under steady state bias and illumination, i.e. under realistic operating conditions. This approach relies on the precise determination of the steady state carrier densities established in the active layer. It turned out that current techniques were not sufficient to measure carrier densities with the necessary accuracy. Therefore, a new technique {Bias Assisted Charge Extraction} (BACE) was developed. Here, the charge carriers photogenerated under steady state illumination are extracted by applying a high reverse bias. The accelerated extraction compared to conventional charge extraction minimizes losses through non-geminate recombination and trapping during extraction. By performing numerical device simulations under steady state, conditions were established under which quantitative information on the dynamics can be retrieved from BACE measurements.
The applied experimental techniques allowed to sensitively analyse and quantify geminate and non-geminate recombination losses along with charge transport in organic solar cells. A full analysis was exemplarily demonstrated for two prominent polymer-fullerene blends.
The model system P3HT:PCBM spincast from chloroform (as prepared) exhibits poor power conversion efficiencies (PCE) on the order of 0.5%, mainly caused by low fill factors (FF) and currents. It could be shown that the performance of these devices is limited by the hole transport and large bimolecular recombination (BMR) losses, while geminate recombination losses are insignificant. The low polymer crystallinity and poor interconnection between the polymer and fullerene domains leads to a hole mobility of the order of 10^-7 cm^2/Vs which is several orders of magnitude lower than the electron mobility in these devices. The concomitant build up of space charge hinders extraction of both electrons and holes and promotes bimolecular recombination losses.
Thermal annealing of P3HT:PCBM blends directly after spin coating improves crystallinity and interconnection of the polymer and the fullerene phase and results in comparatively high electron and hole mobilities in the order of 10^-3 cm^2/Vs and 10^-4 cm^2/Vs, respectively. In addition, a coarsening of the domain sizes leads to a reduction of the BMR by one order of magnitude. High charge carrier mobilities and low recombination losses result in comparatively high FF (>65%) and short circuit current (J_SC ≈ 10 mA/cm^2). The overall device performance (PCE ≈ 4%) is only limited by a rather low spectral overlap of absorption and solar emission and a small V_OC, given by the energetics of the P3HT.
From this point of view the combination of the low bandgap polymer PTB7 with PCBM is a promising approach. In BHJ solar cells, this polymer leads to a higher V_OC due to optimized energetics with PCBM. However, the J_SC in these (unoptimized) devices is similar to the J_SC in the optimized blend with P3HT and the FF is rather low (≈ 50%). It turned out that the unoptimized PTB7:PCBM blends suffer from high BMR, a low electron mobility of the order of 10^-5 cm^2/Vs and geminate recombination losses due to field dependent charge carrier generation.
The use of the solvent additive DIO optimizes the blend morphology, mainly by suppressing the formation of very large fullerene domains and by forming a more uniform structure of well interconnected donor and acceptor domains of the order of a few nanometers. Our analysis shows that this results in an increase of the electron mobility by about one order of magnitude (3 x 10^-4 cm^2/Vs), while BMR and geminate recombination losses are significantly reduced. In total these effects improve the J_SC (≈ 17 mA/cm^2) and the FF (> 70%). In 2012 this polymer/fullerene combination resulted in a record PCE for a single junction OSC of 9.2%.
Remarkably, the numerical device simulations revealed that the specific shape of the J-V characteristics depends very sensitively to the variation of not only one, but all dynamic parameters. On the one hand this proves that the experimentally determined parameters, if leading to a good match between simulated and measured J-V curves, are realistic and reliable. On the other hand it also emphasizes the importance to consider all involved dynamic quantities, namely charge carrier generation, geminate and non-geminate recombination as well as electron and hole mobilities. The measurement or investigation of only a subset of these parameters as frequently found in literature will lead to an incomplete picture and possibly to misleading conclusions.
Importantly, the comparison of the numerical device simulation employing the measured parameters and the experimental $J-V$ characteristics allows to identify loss channels and limitations of OSC. For example, it turned out that inefficient extraction of charge carriers is a criticical limitation factor that is often disobeyed. However, efficient and fast transport of charges becomes more and more important with the development of new low bandgap materials with very high internal quantum efficiencies. Likewise, due to moderate charge carrier mobilities, the active layer thicknesses of current high-performance devices are usually limited to around 100 nm. However, larger layer thicknesses would be more favourable with respect to higher current output and robustness of production. Newly designed donor materials should therefore at best show a high tendency to form crystalline structures, as observed in P3HT, combined with the optimized energetics and quantum efficiency of, for example, PTB7.
Ecosystems play a pivotal role in addressing climate change but are also highly susceptible to drastic environmental changes. Investigating their historical dynamics can enhance our understanding of how they might respond to unprecedented future environmental shifts. With Arctic lakes currently under substantial pressure from climate change, lessons from the past can guide our understanding of potential disruptions to these lakes. However, individual lake systems are multifaceted and complex. Traditional isolated lake studies often fail to provide a global perspective because localized nuances—like individual lake parameters, catchment areas, and lake histories—can overshadow broader conclusions. In light of these complexities, a more nuanced approach is essential to analyze lake systems in a global context.
A key to addressing this challenge lies in the data-driven analysis of sedimentological records from various northern lake systems. This dissertation emphasizes lake systems in the northern Eurasian region, particularly in Russia (n=59). For this doctoral thesis, we collected sedimentological data from various sources, which required a standardized framework for further analysis. Therefore, we designed a conceptual model for integrating and standardizing heterogeneous multi-proxy data into a relational database management system (PostgreSQL). Creating a database from the collected data enabled comparative numerical analyses between spatially separated lakes as well as between different proxies.
When analyzing numerous lakes, establishing a common frame of reference was crucial. We achieved this by converting proxy values from depth dependency to age dependency. This required consistent age calculations across all lakes and proxies using one age-depth modeling software. Recognizing the broader implications and potential pitfalls of this, we developed the LANDO approach ("Linked Age and Depth Modelling"). LANDO is an innovative integration of multiple age-depth modeling software into a singular, cohesive platform (Jupyter Notebook). Beyond its ability to aggregate data from five renowned age-depth modeling software, LANDO uniquely empowers users to filter out implausible model outcomes using robust geoscientific data. Our method is not only novel but also significantly enhances the accuracy and reliability of lake analyses.
Considering the preceding steps, this doctoral thesis further examines the relationship between carbon in sediments and temperature over the last 21,000 years. Initially, we hypothesized a positive correlation between carbon accumulation in lakes and modelled paleotemperature. Our homogenized dataset from heterogeneous lakes confirmed this association, even if the highest temperatures throughout our observation period do not correlate with the highest carbon values. We assume that rapid warming events contribute more to high accumulation, while sustained warming leads to carbon outgassing. Considering the current high concentration of carbon in the atmosphere and rising temperatures, ongoing climate change could cause northern lake systems to contribute to a further increase in atmospheric carbon (positive feedback loop). While our findings underscore the reliability of both our standardized data and the LANDO method, expanding our dataset might offer even greater assurance in our conclusions.
Signals stored in sediment
(2018)
Tectonic and climatic boundary conditions determine the amount and the characteristics (size distribution and composition) of sediment that is generated and exported from mountain regions. On millennial timescales, rivers adjust their morphology such that the incoming sediment (Qs,in) can be transported downstream by the available water discharge (Qw). Changes in climatic and tectonic boundary conditions thus trigger an adjustment of the downstream river morphology. Understanding the sensitivity of river morphology to perturbations in boundary conditions is therefore of major importance, for example, for flood assessments, infrastructure and habitats. Although we have a general understanding of how rivers evolve over longer timescales, the prediction of channel response to changes in boundary conditions on a more local scale and over shorter timescales remains a major challenge. To better predict morphological channel evolution, we need to test (i) how channels respond to perturbations in boundary conditions and (ii) how signals reflecting the persisting conditions are preserved in sediment characteristics. This information can then be applied to reconstruct how local river systems have evolved over time.
In this thesis, I address those questions by combining targeted field data collection in the Quebrada del Toro (Southern Central Andes of NW Argentina) with cosmogenic nuclide analysis and remote sensing data. In particular, I (1) investigate how information on hillslope processes is preserved in the 10Be concentration (geochemical composition) of fluvial sediments and how those signals are altered during downstream transport. I complement the field-based approach with physical experiments in the laboratory, in which I (2) explore how changes in sediment supply (Qs,in) or water discharge (Qw) generate distinct signals in the amount of sediment discharge at the basin outlet (Qs,out). With the same set of experiments, I (3) study the adjustments of alluvial channel morphology to changes in Qw and Qs,in, with a particular focus in fill-terrace formation. I transfer the findings from the experiments to the field to (4) reconstruct the evolution of a several-hundred meter thick fluvial fill-terrace sequence in the Quebrada del Toro. I create a detailed terrace chronology and perform reconstructions of paleo-Qs and Qw from the terrace deposits. In the following paragraphs, I summarize my findings on each of these four topics.
First, I sampled detrital sediment at the outlet of tributaries and along the main stem in the Quebrada del Toro, analyzed their 10Be concentration ([10Be]) and compared the data to a detailed hillslope-process inventory. The often observed non-linear increase in catchment-mean denudation rate (inferred from [10Be] in fluvial sediment) with catchment-median slope, which has commonly been explained by an adjustment in landslide-frequency, coincided with a shift in the main type of hillslope processes. In addition, the [10Be] in fluvial sediments varied with grain-size. I defined the normalized sand-gravel-index (NSGI) as the 10Be-concentration difference between sand and gravel fractions divided by their summed concentrations. The NSGI increased with median catchment slope and coincided with a shift in the prevailing hillslope processes active in the catchments, thus making the NSGI a potential proxy for the evolution of hillslope processes over time from sedimentary deposits. However, the NSGI recorded hillslope-processes less well in regions of reduced hillslope-channel connectivity and, in addition, has the potential to be altered during downstream transport due to lateral sediment input, size-selective sediment transport and abrasion.
Second, my physical experiments revealed that sediment discharge at the basin outlet (Qs,out) varied in response to changes in Qs,in or Qw. While changes in Qw caused a distinct signal in Qs,out during the transient adjustment phase of the channel to new boundary conditions, signals related to changes in Qs,in were buffered during the transient phase and likely only become apparent once the channel is adjusted to the new conditions. The temporal buffering is related to the negative feedback between Qs,in and channel-slope adjustments. In addition, I inferred from this result that signals extracted from the geochemical composition of sediments (e.g., [10Be]) are more likely to represent modern-day conditions during times of aggradation, whereas the signal will be temporally buffered due to mixing with older, remobilized sediment during times of channel incision.
Third, the same set of experiments revealed that river incision, channel-width narrowing and terrace cutting were initiated by either an increase in Qw, a decrease in Qs,in or a drop in base level. The lag-time between the external perturbation and the terrace cutting determined (1) how well terrace surfaces preserved the channel profile prior to perturbation and (2) the degree of reworking of terrace-surface material. Short lag-times and well preserved profiles occurred in cases with a rapid onset of incision. Also, lag-times were synchronous along the entire channel after upstream perturbations (Qw, Qs,in), whereas base-level fall triggered an upstream migrating knickzone, such that lag-times increased with distance upstream. Terraces formed after upstream perturbations (Qw, Qs,in) were always steeper when compared to the active channel in new equilibrium conditions. In the base-level fall experiment, the slope of the terrace-surfaces and the modern channel were similar. Hence, slope comparisons between the terrace surface and the modern channel can give insights into the mechanism of terrace formation.
Fourth, my detailed terrace-formation chronology indicated that cut-and-fill episodes in the Quebrada del Toro followed a ~100-kyr cyclicity, with the oldest terraces ~ 500 kyr old. The terraces were formed due to variability in upstream Qw and Qs. Reconstructions of paleo-Qs over the last 500 kyr, which were restricted to times of sediment deposition, indicated only minor (up to four-fold) variations in paleo-denudation rates. Reconstructions of paleo-Qw were limited to the times around the onset of river incision and revealed enhanced discharge from 10 to 85% compared to today. Such increases in Qw are in agreement with other quantitative paleo-hydrological reconstructions from the Eastern Andes, but have the advantage of dating further back in time.
Orogenic peridotites represent portions of upper subcontinental mantle now incorporated in mountain belts. They often contain layers, lenses and irregular bodies of pyroxenite and eclogite. The origin of this heterogeneity and the nature of these layers is still debated but it is likely to involve processes such as transient melts coming from the crust or the mantle and segregating in magma conduits, crust-mantle interaction, upwelling of the asthenosphere and metasomatism. All these processes occur in the lithospheric mantle and are often related with the subduction of crustal rocks to mantle depths. In fact, during subduction, fluids and melts are released from the slab and can interact with the overlying mantle, making the study of deep melts in this environment crucial to understand mantle heterogeneity and crust-mantle interaction. The aim of this thesis is precisely to better constrain how such processes take place studying directly the melt trapped as primary inclusions in pyroxenites and eclogites. The Bohemian Massif, crystalline core of the Variscan belt, is targeted for these purposes because it contains orogenic peridotites with layers of pyroxenite and eclogite and other mafic rocks enclosed in felsic high pressure and ultra-high pressure crustal rocks. Within this Massif mafic rocks from two areas have been selected: the garnet clinopyroxenite in orogenic peridotite of the Granulitgebirge and the ultra-high pressure eclogite in the diamond-bearing gneisses of the Erzgebirge. In both areas primary melt inclusions were recognized in the garnet, ranging in size between 2-25 µm and with different degrees of crystallization, from glassy to polycrystalline. They have been investigated with Micro Raman spectroscopy and EDS mapping and the mineral assemblage is kumdykolite, phlogopite, quartz, kokchetavite, phase with a main Raman peak at 430 cm-1, phase with a main Raman peak at 412 cm-1, white mica and calcite with some variability in relative abundance depending on the case study. In the Granulitgebirge osumilite and pyroxene are also present, whereas calcite is one of the main phases in the Erzgebirge. The presence of glass and the mineral assemblage in the nanogranitoids suggest that they were former droplets of melt trapped in the garnet while it was growing. Glassy inclusions and re-homogenized nanogranitoids show a silicate melt that is granitic, hydrous, high in alkalis and weakly peraluminous. The melt is also enriched in both case studies in Cs, Pb, Rb, U, Th, Li and B suggesting the involvement of crustal component, i.e. white mica (main carrier of Cs, Pb, Rb, Li and B), and a fluid (Cs, Th and U) in the melt producing reaction. The whole rock in both cases mainly consists of garnet and clinopyroxene with, in Erzgebirge samples, the additional presence of quartz both in the matrix and as a polycrystalline inclusion in the garnet. The latter is interpreted as a quartz pseudomorph after coesite and occurs in the same microstructural position as the melt inclusions. Both rock types show a crustal and subduction zone signature with garnet and clinopyroxene in equilibrium. Melt was likely present during the metamorphic peak of the rock, as it occurs in garnet.
Our data suggest that the processes most likely responsible for the formation of the investigated rocks in both areas is a metasomatic reaction between a melt produced in the crust and mafic layers formerly located in the mantle wedge for the Granulitgebirge and in the subducted continental crust itself in the Erzgebirge. Thus metasomatism in the first case took place in the mantle overlying the slab, whereas in the second case metasomatism took place in the continental crust that already contained, before subduction, mafic layers. Moreover, the presence of former coesite in the same microstructural position of the melt inclusions in the Erzgebirge garnets suggest that metasomatism took place at ultra-high pressure conditions.
Summarizing, in this thesis we provide new insights into the geodynamic evolution of the Bohemian Massif based on the study of melt inclusions in garnet in two different mafic rock types, combining the direct microstructural and geochemical investigation of the inclusions with the whole-rock and mineral geochemistry. We report for the first time data, directly extracted from natural rocks, on the metasomatic melt responsible for the metasomatism of several areas of the Bohemian Massif. Besides the two locations here investigated, belonging to the Saxothuringian Zone, a signature similar to the investigated melt is clearly visible in pyroxenite and peridotite of the T-7 borehole (again Saxothuringian Zone) and the durbachite suite located in the Moldanubian Zone.