- Thin films of amorphous Fe85Zr15 alloy were deposited by ion-beam sputtering of a composite target. Analogous to the melt-spun amorphous alloys of similar composition, the crystallization of the amorphous film occurs in two steps, however, with a substantially reduced thermal stability. After completion of the first crystallization step which starts at 473 K, the microstructure consists of 12 nm nanocrystals of bcc-Fe embedded in a grain boundary region of the remaining amorphous phase. At 673 K, the remaining amorphous phase transforms into the Fe2Zr alloy. The self-diffusion measurements of iron in the nanocrystalline state and in the parent amorphous state has been carried out using secondary ion mass spectroscopy (SIMS) depth profiling and neutron reflectivity techniques. In contrast to the case of finemet Fe73.5Si13.5B9Nb3Cu1 alloy, where a significant enhancement of diffusivity takes place in the nanocrystalline state, in the present case the diffusivity in the nanocrystalline state is similar to that in the parent amorphousThin films of amorphous Fe85Zr15 alloy were deposited by ion-beam sputtering of a composite target. Analogous to the melt-spun amorphous alloys of similar composition, the crystallization of the amorphous film occurs in two steps, however, with a substantially reduced thermal stability. After completion of the first crystallization step which starts at 473 K, the microstructure consists of 12 nm nanocrystals of bcc-Fe embedded in a grain boundary region of the remaining amorphous phase. At 673 K, the remaining amorphous phase transforms into the Fe2Zr alloy. The self-diffusion measurements of iron in the nanocrystalline state and in the parent amorphous state has been carried out using secondary ion mass spectroscopy (SIMS) depth profiling and neutron reflectivity techniques. In contrast to the case of finemet Fe73.5Si13.5B9Nb3Cu1 alloy, where a significant enhancement of diffusivity takes place in the nanocrystalline state, in the present case the diffusivity in the nanocrystalline state is similar to that in the parent amorphous state. It is suggested that in this system the atomic diffusion occurs mainly via the grain boundary regions. The calculated values of the pre-exponential factor and the activation energy for the diffusion are D-0 = 1 x 10(-14+/-1) m(2)/s and E = (0.7 +/- 0.1) eV respectively. (C) 2004 Published by Elsevier B.V.…
