90.00.00 GEOPHYSICS, ASTRONOMY, AND ASTROPHYSICS (for more detailed headings, see the Geophysics Appendix)
Refine
Document Type
- Doctoral Thesis (21)
- Bachelor Thesis (1)
- Habilitation Thesis (1)
Is part of the Bibliography
- yes (23)
Keywords
The Lombok Island is part of the Lesser Sunda Islands (LSI) region – Indonesia, situated along the Sunda-Banda Arcs transition. It lies between zones characterized by the highest intensity geomagnetic anomalies of this region, remarkable as one of the eight most important features provided on the 1st edition of World Digital Magnetic Anomaly Map. The seismicity of this region during the last years is high, while the geological and tectonic structures of this region are still not known in detail. Some local magnetic surveys have been conducted previously during 2004–2005. However, due to the lower accuracy of the used equipment and a limited number of stations, the qualities of the previous measurements are questionable for more interpretations. Thus a more detailed study to better characterize the geomagnetic anomaly -spatially and temporally- over this region and to deeply explore the related regional geology, tectonic and seismicity is needed. The intriguing geomagnetic anomalies over this island region vis-à-vis the socio-cultural situations lead to a study with a special aim to contribute to the assessment of the potential of natural hazards (earthquakes) as well as a new natural resource of energy (geothermal potential).
This study is intended to discuss several crucial questions, including:
i. The real values and the general pattern of magnetic anomalies over the island, as well as their relation to the regional one.
ii. Any temporal changes of regional anomalies over the recent time.
iii. The relationships between the anomalies and the geology and tectonic of this region, especially new insights that can be gained from the geomagnetic observations.
iv. The relationships between the anomalies and the high seismicity of this region, especially some possible links between their variations to the earthquake occurrence.
First, all available geomagnetic data of this region and results of the previous measurements are evaluated. The new geomagnetic surveys carried out in 2006 and 2007/2008 are then presented in detail, followed by the general description of data processing and data quality evaluation. The new results show the general pattern of contiguous negative-positive anomalies, revealing an active arc related subduction region. They agree with earlier results obtained by satellite, aeromagnetic, and marine platforms; and provide a much more detailed picture of the strong anomalies on this island. The temporal characteristics of regional anomalies show a decreasing strength of the dipolar structure, where decreasing of the field intensities is faster than the regional secular variations as defined by the global model (the 10th generation of IGRF). However, some exceptions (increasing of anomalies) have to be noted and further analyzed for several locations.
Thereafter, simultaneous magnetic anomalies and gravity models are generated and interpreted in detail. Three profiles are investigated, providing new insights into the tectonics and geological evolution of the Lombok Island. Geological structure of this island can be divided as two main parts with different consecutive ages: an old part (from late Oligocene to late Miocene) in the South and a younger one (from Pliocene to Holocene) in the North. A new subduction in the back arc region (the Flores Thrust zone) is considered mature and active, showing a tendency of progressive subduction during 2005–2008. Geothermal potential in the northern part of this island can be mapped in more detail using these geomagnetic regional survey data. The earlier estimates of reservoir depth can be confirmed further to a depth of about 800 m. Evaluation of temporal changes of the anomalies gives some possible explanations related to the evolution of the back arc region, large stress accumulations over the LSI region, a specific electrical characteristic of the crust of the Lombok Island region, and a structural discontinuity over this island.
Based on the results, several possible advanced studies involving geomagnetic data and anomaly investigations over the Lombok Island region can be suggested for the future:
i. Monitoring the subduction activity of the back arc region (the Flores Thrust zone) and the accumulated stress over the LSI, that could contribute to middle term hazard assessment with a special attention to the earthquake occurrence in this region. Continuous geomagnetic field measurements from a geomagnetic observatory which can be established in the northern part of the Lombok Island and systematic measurements at several repeat stations can be useful in this regards.
ii. Investigating the specific electrical characteristic (high conductivity) of the crust, that is probably related to some aquifer layers or metal mineralization. It needs other complementary geophysical methods, such as magnetotelluric (MT) or preferably DC resistivity measurements.
iii. Determining the existence of an active structural fault over the Lombok Island, that could be related to long term hazard assessment over the LSI region. This needs an extension of geomagnetic investigations over the neighbouring islands (the Bali Island in the West and the Sumbawa Island in the East; probably also the Sumba and the Flores islands). This seems possible because the regional magnetic lineations might be used to delineate some structural discontinuities, based on the modelling of contrasts in crustal magnetizations.
In March 2010, the project CoCoCo (incipient COntinent-COntinent COllision) recorded a 650 km long amphibian N-S wide-angle seismic profile, extending from the Eratosthenes Seamount (ESM) across Cyprus and southern Turkey to the Anatolian plateau. The aim of the project is to reveal the impact of the transition from subduction to continent-continent collision of the African plate with the Cyprus-Anatolian plate. A visual quality check, frequency analysis and filtering were applied to the seismic data and reveal a good data quality. Subsequent first break picking, finite-differences ray tracing and inversion of the offshore wide-angle data leads to a first-arrival tomographic model. This model reveals (1) P-wave velocities lower than 6.5 km/s in the crust, (2) a variable crustal thickness of about 28 - 37 km and (3) an upper crustal reflection at 5 km depth beneath the ESM. Two land shots on Turkey, also recorded on Cyprus, airgun shots south of Cyprus and geological and previous seismic investigations provide the information to derive a layered velocity model beneath the Anatolian plateau and for the ophiolite complex on Cyprus. The analysis of the reflections provides evidence for a north-dipping plate subducting beneath Cyprus. The main features of this layered velocity model are (1) an upper and lower crust with large lateral changes of the velocity structure and thickness, (2) a Moho depth of about 38 - 45 km beneath the Anatolian plateau, (3) a shallow north-dipping subducting plate below Cyprus with an increasing dip and (4) a typical ophiolite sequence on Cyprus with a total thickness of about 12 km. The offshore-onshore seismic data complete and improve the information about the velocity structure beneath Cyprus and the deeper part of the offshore tomographic model. Thus, the wide-angle seismic data provide detailed insights into the 2-D geometry and velocity structures of the uplifted and overriding Cyprus-Anatolian plate. Subsequent gravity modelling confirms and extends the crustal P-wave velocity model. The deeper part of the subducting plate is constrained by the gravity data and has a dip angle of ~ 28°. Finally, an integrated analysis of the geophysical and geological information allows a comprehensive interpretation of the crustal structure related to the collision process.
The quantitative descriptions of the state of stress in the Earth’s crust, and spatial-temporal stress changes are of great importance in terms of scientific questions as well as applied geotechnical issues. Human activities in the underground (boreholes, tunnels, caverns, reservoir management, etc.) have a large impact on the stress state. It is important to assess, whether these activities may lead to (unpredictable) hazards, such as induced seismicity. Equally important is the understanding of the in situ stress state in the Earth’s crust, as it allows the determination of safe well paths, already during well planning. The same goes for the optimal configuration of the injection- and production wells, where stimulation for artificial fluid path ways is necessary.
The here presented cumulative dissertation consists of four separate manuscripts, which are already published, submitted or will be submitted for peer review within the next weeks. The main focus is on the investigation of the possible usage of geothermal energy in the province Alberta (Canada). A 3-D geomechanical–numerical model was designed to quantify the contemporary 3-D stress tensor in the upper crust. For the calibration of the regional model, 321 stress orientation data and 2714 stress magnitude data were collected, whereby the size and diversity of the database is unique. A calibration scheme was developed, where the model is calibrated versus the in situ stress data stepwise for each data type and gradually optimized using statistically test methods. The optimum displacement on the model boundaries can be determined by bivariate linear regression, based on only three model runs with varying deformation ratio. The best-fit model is able to predict most of the in situ stress data quite well. Thus, the model can provide the full stress tensor along any chosen virtual well paths. This can be used to optimize the orientation of horizontal wells, which e.g. can be used for reservoir stimulation. The model confirms regional deviations from the average stress orientation trend, such as in the region of the Peace River Arch and the Bow Island Arch.
In the context of data compilation for the Alberta stress model, the Canadian database of the World Stress Map (WSM) could be expanded by including 514 new data records. This publication of an update of the Canadian stress map after ~20 years with a specific focus on Alberta shows, that the maximum horizontal stress (SHmax) is oriented southwest to northeast over large areas in Northern America. The SHmax orientation in Alberta is very homogeneous, with an average of about 47°. In order to calculate the average SHmax orientation on a regular grid as well as to estimate the wave-length of stress orientation, an existing algorithm has been improved and is applied to the Canadian data. The newly introduced quasi interquartile range on the circle (QIROC) improves the variance estimation of periodic data, as it is less susceptible to its outliers.
Another geomechanical–numerical model was built to estimate the 3D stress tensor in the target area ”Nördlich Lägern” in Northern Switzerland. This location, with Opalinus clay as a host rock, is a potential repository site for high-level radioactive waste. The performed modelling aims to investigate the sensitivity of the stress tensor on tectonic shortening, topography, faults and variable rock properties within the Mesozoic sedimentary stack, according to the required stability needed for a suitable radioactive waste disposal site. The majority of the tectonic stresses caused by the far-field shortening from the South are admitted by the competent rock units in the footwall and hanging wall of the argillaceous target horizon, the Upper Malm and Upper Muschelkalk. Thus, the differential stress within the host rock remains relatively low. East-west striking faults release stresses driven by tectonic shortening. The purely gravitational influence by the topography is low; higher SHmax magnitudes below topographical depression and lower values below hills are mainly observed near the surface. A complete calibration of the model is not possible, as no stress magnitude data are available for calibration, yet. The collection of this data will begin in 2015; subsequently they will be used to adjust the geomechanical–numerical model again.
The third geomechanical–numerical model investigates the stress variation in an ultra-deep gold mine in South Africa. This reservoir model is spatially one order of magnitude smaller than the previous local model from Northern Switzerland. Here, the primary focus is to investigate the hypothesis that the Mw 1.9 earthquake on 27 December 2007 was induced by stress changes due to the mining process. The Coulomb failure stress change (DeltaCFS) was used to analyse the stress change. It confirmed that the seismic event was induced by static stress transfer due to the mining progress. The rock was brought closer to failure on the derived rupture plane by stress changes of up to 1.5–15MPa, in dependence of the DeltaCFS analysis type. A forward modelling of a generic excavation scheme reveals that with decreasing distance to the dyke the DeltaCFS values increase significantly. Hence, even small changes in the mining progress can have a significant impact on the seismic hazard risk, i.e. the change of the occurrence probability to induce a seismic event of economic concern.
Optical frequency combs (OFC) constitute an array of phase-correlated equidistant spectral lines with nearly equal intensities over a broad spectral range. The adaptations of combs generated in mode-locked lasers proved to be highly efficient for the calibration of high-resolution (resolving power > 50000) astronomical spectrographs. The observation of different galaxy structures or the studies of the Milky Way are done using instruments in the low- and medium resolution range. To such instruments belong, for instance, the Multi Unit Spectroscopic Explorer (MUSE) being developed for the Very Large Telescope (VLT) of the European Southern Observatory (ESO) and the 4-metre Multi-Object Spectroscopic Telescope (4MOST) being in development for the ESO VISTA 4.1 m Telescope. The existing adaptations of OFC from mode-locked lasers are not resolvable by these instruments.
Within this work, a fibre-based approach for generation of OFC specifically in the low- and medium resolution range is studied numerically. This approach consists of three optical fibres that are fed by two equally intense continuous-wave (CW) lasers. The first fibre is a conventional single-mode fibre, the second one is a suitably pumped amplifying Erbium-doped fibre with anomalous dispersion, and the third one is a low-dispersion highly nonlinear optical fibre. The evolution of a frequency comb in this system is governed by the following processes: as the two initial CW-laser waves with different frequencies propagate through the first fibre, they generate an initial comb via a cascade of four-wave mixing processes. The frequency components of the comb are phase-correlated with the original laser lines and have a frequency spacing that is equal to the initial laser frequency separation (LFS), i.e. the difference in the laser frequencies. In the time domain, a train of pre-compressed pulses with widths of a few pico-seconds arises out of the initial bichromatic deeply-modulated cosine-wave. These pulses undergo strong compression in the subsequent amplifying Erbium-doped fibre: sub-100 fs pulses with broad OFC spectra are formed. In the following low-dispersion highly nonlinear fibre, the OFC experience a further broadening and the intensity of the comb lines are fairly equalised. This approach was mathematically modelled by means of a Generalised Nonlinear Schrödinger Equation (GNLS) that contains terms describing the nonlinear optical Kerr effect, the delayed Raman response, the pulse self-steepening, and the linear optical losses as well as the wavelength-dependent Erbium gain profile for the second fibre. The initial condition equation being a deeply-modulated cosine-wave mimics the radiation of the two initial CW lasers. The numerical studies are performed with the help of Matlab scripts that were specifically developed for the integration of the GNLS and the initial condition according to the proposed approach for the OFC generation. The scripts are based on the Fourth-Order Runge-Kutta in the Interaction Picture Method (RK4IP) in combination with the local error method.
This work includes the studies and results on the length optimisation of the first and the second fibre depending on different values of the group-velocity dispersion of the first fibre. Such length optimisation studies are necessary because the OFC have the biggest possible broadband and exhibit a low level of noise exactly at the optimum lengths. Further, the optical pulse build-up in the first and the second fibre was studied by means of the numerical technique called Soliton Radiation Beat Analysis (SRBA). It was shown that a common soliton crystal state is formed in the first fibre for low laser input powers. The soliton crystal continuously dissolves into separated optical solitons as the input power increases. The pulse formation in the second fibre is critically dependent on the features of the pulses formed in the first fibre. I showed that, for low input powers, an adiabatic soliton compression delivering low-noise OFC occurs in the second fibre. At high input powers, the pulses in the first fibre have more complicated structures which leads to the pulse break-up in the second fibre with a subsequent degradation of the OFC noise performance. The pulse intensity noise studies that were performed within the framework of this thesis allow making statements about the noise performance of an OFC. They showed that the intensity noise of the whole system decreases with the increasing value of LFS.
Earthquake clustering has proven the most useful tool to forecast changes in seismicity rates in the short and medium term (hours to months), and efforts are currently being made to extend the scope of such models to operational earthquake forecasting. The overarching goal of the research presented in this thesis is to improve physics-based earthquake forecasts, with a focus on aftershock sequences. Physical models of triggered seismicity are based on the redistribution of stresses in the crust, coupled with the rate-and-state constitutive law proposed by Dieterich to calculate changes in seismicity rate. This type of models are known as Coulomb- rate and-state (CRS) models. In spite of the success of the Coulomb hypothesis, CRS models typically performed poorly in comparison to statistical ones, and they have been underepresented in the operational forecasting context. In this thesis, I address some of these issues, and in particular these questions: (1) How can we realistically model the uncertainties and heterogeneity of the mainshock stress field? (2) What is the effect of time dependent stresses in the postseismic phase on seismicity? I focus on two case studies from different tectonic settings: the Mw 9.0 Tohoku megathrust and the Mw 6.0 Parkfield strike slip earthquake. I study aleatoric uncertainties using a Monte Carlo method. I find that the existence of multiple receiver faults is the most important source of intrinsic stress heterogeneity, and CRS models perform better when this variability is taken into account. Epistemic uncertainties inherited from the slip models also have a significant impact on the forecast, and I find that an ensemble model based on several slip distributions outperforms most individual models. I address the role of postseismic stresses due to aseismic slip on the mainshock fault (afterslip) and to the redistribution of stresses by previous aftershocks (secondary triggering). I find that modeling secondary triggering improves model performance. The effect of afterslip is less clear, and difficult to assess for near-fault aftershocks due to the large uncertainties of the afterslip models. Off-fault events, on the other hand, are less sensitive to the details of the slip distribution: I find that following the Tohoku earthquake, afterslip promotes seismicity in the Fukushima region. To evaluate the performance of the improved CRS models in a pseudo-operational context, I submitted them for independent testing to a collaborative experiment carried out by CSEP for the 2010-2012 Canterbury sequence. Preliminary results indicate that physical models generally perform well compared to statistical ones, suggesting that CRS models may have a role to play in the future of operational forecasting. To facilitate efforts in this direction, and to enable future studies of earthquake triggering by time dependent processes, I have made the code open source. In the final part of this thesis I summarize the capabilities of the program and outline technical aspects regarding performance and parallelization strategies.
In der vorliegenden Arbeit werden verschiedene Experimente zur Untersuchung der elektrischen Leitfähigkeit von Sutur- und Kollisionszonen im Zusammenhang diskutiert, um die Möglichkeiten, die die moderne Magnetotellurik (MT) für das Abbilden fossiler tektonischer Systeme bietet, aufzuzeigen. Aus den neuen hochauflösenden Abbildern der elektrischen Leitfähigkeit können potentielle Gemeinsamkeiten verschiedener tektonischer Einheiten abgeleitet werden. Innerhalb der letzten Dekade haben sich durch die Weiterentwicklung der Messgeräte und der Auswerte- und Interpretationsmethoden völlig neue Perspektiven für die geodynamische Tiefensondierung ergeben. Dies wird an meinen Forschungsarbeiten deutlich, die ich im Rahmen von Projekten selbst eingeworben und am Deutschen GeoForschungsZentrum Potsdam durchgeführt habe. In Tabelle A habe ich die in dieser Arbeit berücksichtigten Experimente aufgeführt, die in den letzten Jahren entweder als Array- oder als Profilmessungen durchgeführt wurden. Für derart große Feldexperimente benötigt man ein Team von WissenschaftlerInnen, StudentInnen und technischem Personal. Das bedeutet aber auch, dass von mir betreute StudentInnen und DoktorandInnen Teilaspekte dieser Experimente in Form von Diplom-, Bachelor- und Mastersarbeiten oder Promotionsschriften verarbeitet haben. Bei anschließender Veröffentlichung der Arbeiten habe ich als Co-Autor mitgewirkt. Die beiliegenden Veröffentlichungen enthalten eine Einführung in die Methode der Magnetotellurik und gegebenenfalls die Beschreibung neu entwickelter Methoden. Eine allgemeine Darstellung der theoretischen Grundlagen der Magnetotellurik findet man zum Beispiel in Chave & Jones (2012); Simpson & Bahr (2005); Kaufman & Keller (1981); Nabighian (1987); Weaver (1994). Die Arbeit beinhaltet zudem ein Glossar, in dem einige Begriffe und Abkürzungen erklärt werden. Ich habe mich entschieden, Begriffe, für die es keine adäquate deutsche Übersetzung gibt oder die im Deutschen eine andere oder missverständliche Bedeutung bekommen, auf Englisch in der Arbeit zu belassen. Sie sind durch eine kursive Schreibweise gekennzeichnet.
This work investigates the influence of the Coriolis force on mass motion related to the Rheasilvia impact basin on asteroid (4) Vesta's southern hemisphere. The giant basin is 500km in diameter, with a centre which nearly coincides with the rotation axis of Vesta. The Rheasilvia basin partially overlaps an earlier, similarly large impact basin, Veneneia.
Mass motion within and in the vicinity of the Rheasilvia basin includes slumping and landslides, which, primarily due to their small linear extents, have not been noticeably affected by the Coriolis force. However, a series of ridges related to the basin exhibit significant curvature, which may record the effect of the Coriolis force on the mass motion which generated them.
In this thesis 32 of these curved ridges, in three geologically distinct regions, were examined. The mass motion velocities from which the ridge curvatures may have resulted during the crater modification stage were investigated. Velocity profiles were derived by fitting inertial circles along the curved ridges and considering both the current and past rotation states of Vesta. An iterative, statistical approach was used, whereby the radii of inertial circles were obtained through repeated fitting to triplets of points across the ridges. The most frequently found radius for each central point was then used for velocity derivation at that point.
The results of the velocity analysis are strongly supportive of a Coriolis force origin for the curved ridges. Derived velocities (29.6 ± 24.6 m/s) generally agree well with previously published predictions from numerical simulations of mass motion during the impact process. Topographical features such as local slope gradient and mass deposition regions on the curved ridges also independently agree with regions in which the calculated mass motion accelerates or decelerates.
Sections of constant acceleration, deceleration and constant velocity are found, showing that mass motion is being governed by varying conditions of topography, regolith structure and friction. Estimates of material properties such as the effective viscosities (1.9-9.0·10⁶ Pa·s) and coefficients of friction (0.02-0.81) are derived from the velocity profile information in these sections. From measured accelerations of mass motions on the crater wall, it is also shown that the crater walls must have been locally steeper at the time of the mass motion.
Together with these novel insights into the state and behaviour of material moving during the modification stage of Rheasilvia's formation, this work represents the first time that the Coriolis Effect on mass motions during crater formation has been shown to result in diagnostic features preserved until today.
We study segregation of the subducted oceanic crust (OC) at the core mantle boundary and its ability to accumulate and form large thermochemical piles (such as the seismically observed Large Low Shear Velocity Provinces - LLSVPs). Our high-resolution numerical simulations suggest that the longevity of LLSVPs for up to three billion years, and possibly longer, can be ensured by a balance in the rate of segregation of high-density OC-material to the CMB, and the rate of its entrainment away from the CMB by mantle upwellings.
For a range of parameters tested in this study, a large-scale compositional anomaly forms at the CMB, similar in shape and size to the LLSVPs. Neutrally buoyant thermochemical piles formed by mechanical stirring - where thermally induced negative density anomaly is balanced by the presence of a fraction of dense anomalous material - best resemble the geometry of LLSVPs. Such neutrally buoyant piles tend to emerge and survive for at least 3Gyr in simulations with quite different parameters. We conclude that for a plausible range of values of density anomaly of OC material in the lower mantle - it is likely that it segregates to the CMB, gets mechanically mixed with the ambient material, and forms neutrally buoyant large scale compositional anomalies similar in shape to the LLSVPs.
We have developed an efficient FEM code with dynamically adaptive time and space resolution, and marker-in-cell methodology. This enabled us to model thermochemical mantle convection at realistically high convective vigor, strong thermally induced viscosity variations, and long term evolution of compositional fields.
Spots on stellar surfaces are thought to be stellar analogues of sunspots. Thus, starspots are direct manifestations of strong magnetic fields. Their decay rate is directly related to the magnetic diffusivity, which itself is a key quantity for the deduction of an activity cycle length. So far, no single starspot decay has been observed, and thus no stellar activity cycle was inferred from its corresponding turbulent diffusivity.
We investigate the evolution of starspots on the rapidly-rotating K0 giant XX Triangulum. Continuous high-resolution and phase-resolved spectroscopy was obtained with the robotic 1.2-m STELLA telescope on Tenerife over a timespan of six years. With our line-profile inversion code iMap we reconstruct a total of 36 consecutive Doppler maps. To quantify starspot area decay and growth, we match the observed images with simplified spot models based on a Monte-Carlo approach.
It is shown that the surface of XX Tri is covered with large high-latitude and even polar spots and with occasional small equatorial spots. Just over the course of six years, we see a systematically changing spot distribution with various time scales and morphology such as spot fragmentation and spot merging as well as spot decay and formation.
For the first time, a starspot decay rate on another star than the Sun is determined. From our spot-decay analysis we determine an average linear decay rate of D = -0.067±0.006 Gm^2/day. From this decay rate, we infer a turbulent diffusivity of η_τ = (6.3±0.5) x 10^14 cm^2/s and consequently predict an activity cycle of 26±6 years. The obtained cycle length matches very well with photometric observations.
Our time-series of Doppler maps further enables to investigate the differential rotation of XX Tri. We therefore applied a cross-correlation analysis. We detect a weak solar-like differential rotation with a surface shear of α = 0.016±0.003. This value agrees with similar studies of other RS CVn stars.
Furthermore, we found evidence for active longitudes and flip-flops. Whereas the more active longitude is located in phase towards the (unseen) companion star, the weaker active longitude is located at the opposite stellar hemisphere. From their periodic appearance, we infer a flip-flop cycle of ~2 years. Both activity phenomena are common on late-type binary stars.
Last but not least we redetermine several astrophysical properties of XX Tri and its binary system, as large datasets of photometric and spectroscopic observations are available since its last determination in 1999. Additionally, we compare the rotational spot-modulation from photometric and spectroscopic studies.
Methanhydrate sind besonders in Verbindung mit den steigenden Weltmarktpreisen für Öl und Gas in den vergangenen Jahren mehr und mehr in den Fokus der Energiewirtschaft geraten, was zu einer starken Zunahme der angewandten Forschungsprojekte auf diesem Gebiet führte. Da Methanhydrat nur unter hohem Druck und niedrigen Temperaturen stabil ist, ist die Gewinnung natürlicher Proben für Laboruntersuchungen technisch sehr aufwendig und vor allem teuer. Zur Charakterisierung der Eigenschaften hydratführender Reservoire ist man häufig auf die Herstellung synthetischer Proben angewiesen. Die Eigenschaften der synthetisierten Proben sind dabei abhängig von der Herstellungsmethode und man ist noch immer auf der Suche nach Verfahren, mit denen sich möglichst „naturnahe“ Proben mit vertretbarem Aufwand erzeugen lassen.
In der vorliegenden Arbeit wurde eine neue, relativ schnell durchführbare Methode getestet, die im Porenraum von Sedimenten schwimmende bzw. gefügestützende Hydrate bildet, wie sie in der Natur vorkommen. Gleichzeitig erzeugt sie eine gleichmäßige Verteilung des Hydrats über die Probe und bietet gute Kontrolle über den Hydratgehalt. Sie funktioniert wie folgt: Eine mit einer KCl-Lösung gesättigte Sedimentprobe wird zu einem bestimmten Teil ausgefroren und das übrige Wasser mit Methan verdrängt. Durch Anlegen eines Methandrucks im Stabilitätsbereich wird das Eis zu Methanhydrat umgesetzt. Im Anschluss wird die Probe erneut mit einer KCl-Lösung gesättigt. Anhand seismischer Messungen konnte bestätigt werden, dass Hydrat mit dem gewünschten Hydrathabitus erzeugt wurde. Des Weiteren wurde gezeigt, dass die eishaltigen Proben aufgrund ähnlicher physikalischer Eigenschaften bereits vor der Umsetzung des Eises zu Methanhydrat als Näherung für Proben mit Porenraumhydrat verwendet werden können.