530 Physik
Refine
Year of publication
- 2017 (134) (remove)
Document Type
- Article (85)
- Doctoral Thesis (19)
- Postprint (13)
- Other (12)
- Review (3)
- Habilitation Thesis (2)
Is part of the Bibliography
- yes (134)
Keywords
- first passage time (3)
- Auger electron spectroscopy (2)
- Complementarity (2)
- Magellanic Clouds (2)
- Mode function (2)
- Quantum optics (2)
- VERITAS (2)
- Vacuum fields (2)
- aspect ratio (2)
- binaries: spectroscopic (2)
Institute
During muscle contractions, radial-force distributions are generated on muscle surfaces due to muscle-volume changes, from which the corresponding body motions can be recorded by means of so-called force myography (FMG). Piezo- or ferroelectrets are flexible piezoelectric materials with attractive materials and sensing properties. In addition to several other applications, they are suitable for detecting force variations by means of wearable devices. In this paper, we prepared piezoelectrets from cellular polypropylene films by optimizing the fabrication procedures, and developed an FMG-recording system based on piezoelectret sensors. Different hand and wrist movements were successfully detected on able-bodied subjects with the FMG system. The FMG patterns were evaluated and identified by means of linear discriminant analysis and artificial neural network algorithms, and average motion-classification accuracies of 96.1% and 94.8%, respectively, were obtained. This paper demonstrates the feasibility of using piezoelectret-film sensors for FMG and may thus lead to alternative methods for detecting body motion and to related applications, e.g., in biomedical engineering or structural-health monitoring.
What are the physical laws of the diffusive search of proteins for their specific binding sites on DNA in the presence of the macromolecular crowding in cells? We performed extensive computer simulations to elucidate the protein target search on DNA. The novel feature is the viscoelastic non-Brownian protein bulk diffusion recently observed experimentally. We examine the influence of the protein-DNA binding affinity and the anomalous diffusion exponent on the target search time. In all cases an optimal search time is found. The relative contribution of intermittent three-dimensional bulk diffusion and one-dimensional sliding of proteins along the DNA is quantified. Our results are discussed in the light of recent single molecule tracking experiments, aiming at a better understanding of the influence of anomalous kinetics of proteins on the facilitated diffusion mechanism.
We perform ab initio molecular dynamics simulations to study the femtosecond laser induced desorption of H-2, D-2, and HD from a H: D-saturated Ru(0001) surface. To this aim we have extended the ab initio molecular dynamics with electronic friction (AIMDEF) scheme to include a random force that is a function of a timedependent electronic temperature. The latter characterizes the action of the ultrashort laser pulse according to a two temperature model. This allows us to perform multidimensional, hot-electron driven reaction dynamics and investigate the dependence of the desorption yields on the relative H: D isotope concentration on the surface. Our AIMDEF simulations show that the desorption process takes place in the presence of a heated adsorbate system that clearly influences the desorption dynamics. The heating of the adsorbate system is more (less) pronounced the larger is the concentration of the lighter (heavier) isotope. As a result, we conclude that the presence of H on the surface favors the desorption of molecules, whereas the presence of D hampers it, in agreement with previous experimental observations in which the phenomenon of "dynamical promotion" of a surface reaction had been postulated.
Ferroelectrets are internally charged polymer foams or cavity-containing polymer-_lm systems that combine large piezoelectricity with mechanical flexibility and elastic compliance. The term “ferroelectret” was coined based on the fact that it is a space-charge electret that also shows ferroic behavior. In this thesis, comprehensive work on ferroelectrets, and in particular on their preparation, their charging, their piezoelectricity and their applications is reported.
For industrial applications, ferroelectrets with well-controlled distributions or even uniform values of cavity size and cavity shape and with good thermal stability of the piezoelectricity are very desirable. Several types of such ferroelectrets are developed using techniques such as straightforward thermal lamination, sandwiching sticky templates with electret films, and screen printing. In particular, uoroethylenepropylene (FEP) _lm systems with tubular-channel openings, prepared by means of the thermal lamination technique, show piezoelectric d33 coefficients of up to 160 pC/N after charging through dielectric barrier discharges (DBDs) . For samples charged at suitable elevated temperatures, the piezoelectricity is stable at temperatures of at least 130°C. These preparation methods are easy to implement at laboratory or industrial scales, and are quite flexible in terms of material selection and cavity geometry design. Due to the uniform and well-controlled cavity structures, samples are also very suitable for fundamental studies on ferroelectrets.
Charging of ferroelectrets is achieved via a series of dielectric barrier discharges (DBDs) inside the cavities. In the present work, the DBD charging process is comprehensively studied by means of optical, electrical and electro-acoustic methods. The spectrum of the transient light from the DBDs in cellular polypropylene (PP) ferroelectrets directly confirms the ionization of molecular nitrogen, and allows the determination of the electric field in the discharge. Detection of the light emission reveals not only DBDs under high applied voltage but also back discharges when the applied voltage is reduced to sufficiently low values. Back discharges are triggered by the internally deposited charges, as the breakdown inside the cavities is controlled by the sum of the applied electric field and the electric field of the deposited charges. The remanent effective polarization is determined by the breakdown strength of the gas-filled cavities. These findings form the basis of more efficient charging techniques for ferroelectrets such as charging with high-pressure air, thermal poling and charging assisted by gas exchange. With the proposed charging strategies, the charging efficiency of ferroelectrets can be enhanced significantly.
After charging, the cavities can be considered as man-made macroscopic dipoles whose direction can be reversed by switching the polarity of the applied voltage. Polarization-versus-electric-field (P(E)) hysteresis loops in ferroelectrets are observed by means of an electro-acoustic method combined with dielectric resonance spectroscopy. P(E) hysteresis loops in ferrroelectrets are also obtained by more direct measurements using a modified Sawyer-Tower circuit. Hysteresis loops prove the ferroic behavior of ferroelectrets. However, repeated switching of the macroscopic dipoles involves complex physico-chemical processes. The DBD charging process generates a cold plasma with numerous active species and thus modifies the inner polymer surfaces of the cavities. Such treatments strongly affect the chargeability of the cavities. At least for cellular PP ferroelectrets, repeated DBDs in atmospheric conditions lead to considerable fatigue of the effective polarization and of the resulting piezoelectricity.
The macroscopic dipoles in ferroelectrets are highly compressible, and hence the piezoelectricity is essentially the primary effect. It is found that the piezoelectric d33 coefficient is proportional to the polarization and the elastic compliance of the sample, providing hints for developing materials with higher piezoelectric sensitivity in the future. Due to their outstanding electromechanical properties, there has been constant interest in the application of ferroelectrets. The antiresonance frequencies (fp) of ferroelectrets are sensitive to the boundary conditions during measurement. A tubular-channel FEP ferroelectret is conformably attached to a self-organized minimum-energy dielectric elastomer actuator (DEA). It turns out that the antiresonance frequency (fp) of the ferroelectret film changes noticeably with the bending angle of the DEA. Therefore, the actuation of DEAs can be used to modulate the fp value of ferroelectrets, but fp can also be exploited for in-situ diagnosis and for precise control of the actuation of the DEA. Combination of DEAs and ferroelectrets opens up various new possibilities for application.
We present rigorous results for the mean first passage time and first passage time statistics for two-channel Markov additive diffusion in a 3-dimensional spherical domain. Inspired by biophysical examples we assume that the particle can only recognise the target in one of the modes, which is shown to effect a non-trivial first passage behaviour. We also address the scenario of intermittent immobilisation. In both cases we prove that despite the perfectly non-recurrent motion of two-channel Markov additive diffusion in 3 dimensions the first passage statistics at long times do not display Poisson-like behaviour if none of the phases has a vanishing diffusion coefficient. This stands in stark contrast to the standard (one-channel) Markov diffusion counterpart. We also discuss the relevance of our results in the context of cellular signalling.
The amplified spontaneous emission from a superluminescent diode was frequency doubled in a periodically poled lithium niobate waveguide crystal. The temporally incoherent radiation of such a superluminescent diode is characterized by a relatively broad spectral bandwidth and thermal-like photon statistics, as the measured degree of second order coherence, g((2))(0)= 1.9 +/- 0.1, indicates. Despite the non-optimized scenario in the spectral domain, we achieve six orders of magnitude higher conversion efficiency than previously reported with truly incoherent light. This is possible by using single spatial mode radiation and quasi phase matched material with a waveguide architecture. This work is a principle step towards efficient frequency conversion of temporally incoherent radiation in one spatial mode to access wavelengths where no radiation from superluminescent diodes is available, especially with tailored quasi phase matched crystals. The frequency doubled light might find application in imaging, metrology and quantum optics experiments.
Galaxies are surrounded by sizeable gas reservoirs which host a significant amount of metals: the circum-galactic medium (CGM). The CGM acts as a mediator between the galaxy and the extragalactic medium. However, our understanding of how galaxy mergers, a major evolutionary transformation, impact the CGM remains deficient. We present a theoretical study of the effect of galaxy mergers on the CGM. We use hydrodynamical cosmological zoom-in simulations of a major merger selected from the Illustris project such that the z = 0 descendant has a halo mass and stellar mass comparable to the Milky Way. To study the CGM we then re-simulated this system at a 40 times better mass resolution, and included detailed post-processing ionization modelling. Our work demonstrates the effect the merger has on the characteristic size of the CGM, its metallicity, and the predicted covering fraction of various commonly observed gas-phase species, such as H I, C IV, and O VI. We show that merger-induced outflows can increase the CGM metallicity by 0.2-0.3 dex within 0.5 Gyr post-merger. These effects last up to 6 Gyr post-merger. While the merger increases the total metal covering fractions by factors of 2-3, the covering fractions of commonly observed UV ions decrease due to the hard ionizing radiation from the active galactic nucleus, which we model explicitly. Our study of the single simulated major merger presented in this work demonstrates the significant impact that a galaxy interaction can have on the size, metallicity, and observed column densities of the CGM.
Imaging atmospheric Cherenkov telescopes (IACTs) are equipped with sensitive photomultiplier tube (PMT) cameras. Exposure to high levels of background illumination degrades the efficiency of and potentially destroys these photo-detectors over time, so IACTs cannot be operated in the same configuration in the presence of bright moonlight as under dark skies. Since September 2012, observations have been carried out with the VERITAS IACTs under bright moonlight (defined as about three times the night-sky-background (NSB) of a dark extragalactic field, typically occurring when Moon illumination > 35%) in two observing modes, firstly by reducing the voltage applied to the PMTs and, secondly, with the addition of ultra-violet (UV) bandpass filters to the cameras. This has allowed observations at up to about 30 times previous NSB levels (around 80% Moon illumination), resulting in 30% more observing time between the two modes over the course of a year. These additional observations have already allowed for the detection of a flare from the 1ES 1727 + 502 and for an observing program targeting a measurement of the cosmic-ray positron fraction. We provide details of these new observing modes and their performance relative to the standard VERITAS observations. (C) 2017 Elsevier B.V. All rights reserved.
Gaussianity Fair
(2017)