530 Physik
Refine
Has Fulltext
- yes (26) (remove)
Year of publication
- 2019 (26) (remove)
Document Type
- Doctoral Thesis (13)
- Postprint (12)
- Habilitation Thesis (1)
Is part of the Bibliography
- yes (26)
Keywords
- anomalous diffusion (4)
- diffusion (4)
- Magnetisierungsdynamik (2)
- silicon (2)
- Bio-Hybrid (1)
- Brownian yet non-Gaussian diffusion (1)
- CU (1)
- Carbonfaser Herstellung (1)
- Chemotaxsis (1)
- Computertomographie (1)
Open-circuit voltages of lead-halide perovskite solar cells are improving rapidly and are approaching the thermodynamic limit. Since many different perovskite compositions with different bandgap energies are actively being investigated, it is not straightforward to compare the open-circuit voltages between these devices as long as a consistent method of referencing is missing. For the purpose of comparing open-circuit voltages and identifying outstanding values, it is imperative to use a unique, generally accepted way of calculating the thermodynamic limit, which is currently not the case. Here a meta-analysis of methods to determine the bandgap and a radiative limit for open-circuit voltage is presented. The differences between the methods are analyzed and an easily applicable approach based on the solar cell quantum efficiency as a general reference is proposed.
We study travelling chimera states in a ring of nonlocally coupled heterogeneous (with Lorentzian distribution of natural frequencies) phase oscillators. These states are coherence-incoherence patterns moving in the lateral direction because of the broken reflection symmetry of the coupling topology. To explain the results of direct numerical simulations we consider the continuum limit of the system. In this case travelling chimera states correspond to smooth travelling wave solutions of some integro-differential equation, called the Ott–Antonsen equation, which describes the long time coarse-grained dynamics of the oscillators. Using the Lyapunov–Schmidt reduction technique we suggest a numerical approach for the continuation of these travelling waves. Moreover, we perform their linear stability analysis and show that travelling chimera states can lose their stability via fold and Hopf bifurcations. Some of the Hopf bifurcations turn out to be supercritical resulting in the observation of modulated travelling chimera states.
Using two crystals for spontaneous parametric down-conversion in a parallel setup, we observe two-photon interference with high visibility. The high visibility is consistent with complementarity and the absence of which-path information. The observations are explained as the effects of entanglement or equivalently in terms of interfering probability amplitudes and also by the calculation of a second-order field correlation function in the Heisenberg picture. The latter approach brings out explicitly the role of the vacuum fields in the down-conversion at the crystals and in the photon coincidence counting. For comparison, we show that the Hong–Ou–Mandel dip can be explained by the same approach in which the role of the vacuum signal and idler fields, as opposed to entanglement involving vacuum states, is emphasized. We discuss the fundamental limitations of a theory in which these vacuum fields are treated as classical, stochastic fields.
Solar wind observations show that geomagnetic storms are mainly driven by interplanetary coronal mass ejections (ICMEs) and corotating or stream interaction regions (C/SIRs). We present a binary classifier that assigns one of these drivers to 7,546 storms between 1930 and 2015 using ground‐based geomagnetic field observations only. The input data consists of the long‐term stable Hourly Magnetospheric Currents index alongside the corresponding midlatitude geomagnetic observatory time series. This data set provides comprehensive information on the global storm time magnetic disturbance field, particularly its spatial variability, over eight solar cycles. For the first time, we use this information statistically with regard to an automated storm driver identification. Our supervised classification model significantly outperforms unskilled baseline models (78% accuracy with 26[19]% misidentified interplanetary coronal mass ejections [corotating or stream interaction regions]) and delivers plausible driver occurrences with regard to storm intensity and solar cycle phase. Our results can readily be used to advance related studies fundamental to space weather research, for example, studies connecting galactic cosmic ray modulation and geomagnetic disturbances. They are fully reproducible by means of the underlying open‐source software (Pick, 2019, http://doi.org/10.5880/GFZ.2.3.2019.003)
Carbonfasern haben sich in der Luft- und Raumfahrt etabliert und gewinnen in Alltagsanwendungen wie dem Automobilbereich, Windkraft- und Sportbereich durch ihre hohen Zugfestigkeiten, insbesondere ihrer hohen E-Moduli, und ihrer geringen Dichte immer mehr an Bedeutung. Auf Grund ihrer hohen Kosten, welche sich zur Hälfte aus der Precursorherstellung, inklusive seiner Synthese und seinem Verspinnprozess, dem Lösungsspinnverfahren, ergeben, erhalten zunehmend alternative und schmelzspinnbare Precursoren Interesse. Für die Carbonfaserherstellung wird fast ausschließlich Polyacrylnitril (PAN) verwendet, das vor dem Schmelzen irreversible exotherme Zyklisierungsreaktionen aufweist, welchen sich seine Zersetzung anschließt. Eine Möglichkeit der Reduzierung der Schmelztemperatur von Polymeren ist die Einbringung von Comonomeren zur Erhöhung des freien Volumens und die Reduzierung der intermolekularen Wechselwirkungen als interne Weichmacher. Wie am Fraunhofer IAP gezeigt wurde, kann mittels 2-Methoxyethylacrylat (MEA) die Schmelztemperatur zu neuartigen PAN-basierten Precursoren verringert werden. Um den PAN-co-MEA-Precursor für die nachfolgenden Prozessschritte der Carbonfaserherstellung zu verwenden, müssen die thermoplastischen Fasern in thermisch stabile Fasern ohne thermoplastisches Verhalten überführt werden. Es wurde ein neuer Prozessschritt (Prästabilisierung) eingeführt, welcher unter alkalischen Bedingungen zur Abspaltung der Comonomerseitenkette führt. Neben der Esterhydrolyse finden Reaktionen statt, welche an diesem Material noch nicht hinreichend untersucht wurden. Weiterhin stellt sich die Frage nach der Kinetik der Prästabilisierung und der Ermittlung einer geeigneten Prozessführung.
Hierzu wurde die Prästabilisierung in den Labormaßstab überführt und die möglichen Zusammensetzungen des aus DMSO und einer KOH-Lösung bestehenden Reaktionsmediums evaluiert. Weiterhin wurde die Behandlung bei verschiedenen Prästabilisierungszeiten von maximal 30 min und Temperaturen von 40, 50 und 60 °C durchgeführt, um primär mittels NMR-Spektroskopie die chemischen Strukturänderungen aufzuklären. Die Esterhydrolyse des Comonomers, welche zur Abspaltung des 2-Methoxyethanols führt, wurde mittels 1H-NMR-spektroskopischer Untersuchungen detektiert.
Es wurde ein Modell aufgestellt, das die chemisch-physikalischen Strukturänderungen während der Prästabilisierung aufzeigt. Die zuerst ablaufende Reaktion ist die Esterhydrolyse am Comonomer, welche vom Faserrand nach innen verläuft und durch die Präsenz des DMSO in Kombination mit der KOH-Lösung (Superbase) initiiert wird. Der zeitliche Reaktionsverlauf der Esterhydrolyse kann in drei Bereiche eingeteilt werden. Der erste Bereich ab dem Prästabilisierungsbeginn wird durch die Diffusion der basischen Anionen in die Faser, der zweite Bereich durch die Reaktion an der Estergruppe des Comonomers und der dritte Bereich durch letzte Reaktionen im Faserinneren und diffusiven Prozessen der Produkte und Edukte charakterisiert. Der zweite Bereich kann mit einer Reaktion pseudo 1. Ordnung abgebildet werden, da in diesem Bereich bereits eine ausreichende Diffusion der Edukte in die Faser stattgefunden hat. Bei 50 °C spielt die Diffusion im ersten Bereich im Vergleich zur Reaktion eine untergeordnete Rolle. Mit Erhöhung der Temperatur auf 60 °C kann eine im Verhältnis geringere Diffusions- als Reaktionsgeschwindigkeit beobachtet werden. Die Nebenreaktionen wurden mittels 13C-CP/MAS-NMR-spektroskopischen, elementaranlaytischen Untersuchungen sowie Doppelbrechungsmessungen charakterisiert. Während der alkalischen Esterhydrolyse beginnt die Reduzierung der Nitrilgruppen unter der Bildung von primären Carbonsäureamiden und Carbonsäuren. Zur Beschreibung dieser Umsetzung wurde eine Methode entwickelt, welche die Addition von 13C-CP/MAS-NMR-Spektren der Modellsubstanzen PAN, PAM und PAA beinhaltet. Weitere stattfindende Reaktionen sind die Bildung von konjugierten Doppelbindungen, welche insbesondere auf eine Zyklisierung der Nitrile hinweisen. Die nasschemisch initiierte Zyklisierung der Nitrilgruppen kann zu kürzeren Stabilisierungszeiten und einem besser kontrollierbaren Stabilisierungsprozess durch geringere Wärmefreisetzung und schlussendlich zu einer Kostenersparnis des gesamten Verfahrens führen. Die Umsetzung der Nitrilgruppen konnte mit einer Reaktion pseudo 1. Ordnung gut abgebildet werden. DMSO initiiert die Esterhydrolyse, wobei die KOH-Konzentration einen höheren Einfluss auf die Reaktionsgeschwindigkeit der Ester- und Nitrilhydrolyse als die DMSO-Konzentration besitzt. Beide Reaktionen zeigen eine vergleichbare Abhängigkeit von der Temperatur. Die Erhöhung der Prästabilisierungszeit und der KOH- bzw. DMSO-Konzentration führt zur Migration niedermolekularer Bestandteile des Fasermaterials an die Oberfläche und der Bildung punktueller Ablagerungen bis hin zu miteinander verbundenen Einzelfasern. Eine weitere Erhöhung der Prästabilisierungszeit bzw. der Konzentration führt zu einem steigenden Carbonsäureanteil und zur Quellung des Fasermaterials, wodurch die Ablagerungen in das Reaktionsmedium diffundieren. Die Ablagerungen enthalten Chlor, welches durch den Waschvorgang mit HCl in das Materialsystem gelangt ist und durch Parameteranpassungen reduziert wurde. Die schmelzbaren Fasern konnten durch die Prästabilisierung erfolgreich über eine Kern-Mantel-Struktur in nicht-thermoplastische Fasern überführt werden.
Zur Ermittlung eines geeigneten Prozessfensters für nachfolgende thermische Beanspruchungen der prästabilisierten Fasern wurden drei Kriterien identifiziert, anhand welcher die Evaluation erfolgte. Das erste Kriterium beinhaltet die Notwendigkeit der vollständigen Aufhebung der thermoplastischen Eigenschaft der Fasern. Als zweites Kriterium diente die Fasermorphologie. Anhand von REM-Aufnahmen wurden Faserbündel mit separierten Einzelfasern ohne Ablagerungen für die nachfolgende Stabilisierung ausgewählt. Das dritte Kriterium bezieht sich auf eine möglichst geringe Umsetzung der Nitrilgruppen, um Prästabilisierungsbedingungen mit Nebenreaktionen zu vermeiden.
Aus den Untersuchungen konnte eine Prästabilisierungstemperatur von 60 °C als geeignet identifiziert werden. Weiterhin führen hoch alkalische Zusammensetzungen des Reaktionsmediums mit KOH-Konzentrationen von 1, 1,5 und 2 M, vorzugsweise 1,5 M und 50 vol% DMSO mit Reaktionszeiten von unter 10 min zu geeigneten Fasern. Ein MEA-Anteil unterhalb von 2 mol% bewirkt eine Überführung in die Unschmelzbarkeit. Thermisch stabile und für die nachfolgende Stabilisierung geeignete Fasern besitzen weiterhin 68 – 80 mol% Nitrilgruppen, 20 – 25 mol% Carbonsäuren, bis zu 15 mol% primäre Carbonsäureamide und zyklisierte Strukturen.
Additive Manufacturing (AM) in terms of laser powder-bed fusion (L-PBF) offers new prospects regarding the design of parts and enables therefore the production of lattice structures. These lattice structures shall be implemented in various industrial applications (e.g. gas turbines) for reasons of material savings or cooling channels. However, internal defects, residual stress, and structural deviations from the nominal geometry are unavoidable.
In this work, the structural integrity of lattice structures manufactured by means of L-PBF was non-destructively investigated on a multiscale approach.
A workflow for quantitative 3D powder analysis in terms of particle size, particle shape, particle porosity, inter-particle distance and packing density was established. Synchrotron computed tomography (CT) was used to correlate the packing density with the particle size and particle shape. It was also observed that at least about 50% of the powder porosity was released during production of the struts.
Struts are the component of lattice structures and were investigated by means of laboratory CT. The focus was on the influence of the build angle on part porosity and surface quality. The surface topography analysis was advanced by the quantitative characterisation of re-entrant surface features. This characterisation was compared with conventional surface parameters showing their complementary information, but also the need for AM specific surface parameters.
The mechanical behaviour of the lattice structure was investigated with in-situ CT under compression and successive digital volume correlation (DVC). The deformation was found to be knot-dominated, and therefore the lattice folds unit cell layer wise.
The residual stress was determined experimentally for the first time in such lattice structures. Neutron diffraction was used for the non-destructive 3D stress investigation. The principal stress directions and values were determined in dependence of the number of measured directions. While a significant uni-axial stress state was found in the strut, a more hydrostatic stress state was found in the knot. In both cases, strut and knot, seven directions were at least needed to find reliable principal stress directions.
Electrets are dielectrics with quasi-permanent electric charge and/or dipoles, sometimes can be regarded as an electric analogy to a magnet. Since the discovery of the excellent charge retention capacity of poly(tetrafluoro ethylene) and the invention of the electret microphone, electrets have grown out of a scientific curiosity to an important application both in science and technology. The history of electret research goes hand in hand with the quest for new materials with better capacity at charge and/or dipole retention. To be useful, electrets normally have to be charged/poled to render them electro-active. This process involves electric-charge deposition and/or electric dipole orientation within the dielectrics ` surfaces and bulk. Knowledge of the spatial distribution of electric charge and/or dipole polarization after their deposition and subsequent decay is crucial in the task to improve their stability in the dielectrics.
Likewise, for dielectrics used in electrical insulation applications, there are also needs for accumulated space-charge and polarization spatial profiling. Traditionally, space-charge accumulation and large dipole polarization within insulating dielectrics is considered undesirable and harmful to the insulating dielectrics as they might cause dielectric loss and could lead to internal electric field distortion and local field enhancement. High local electric field could trigger several aging processes and reduce the insulating dielectrics' lifetime. However, with the advent of high-voltage DC transmission and high-voltage capacitor for energy storage, these are no longer the case. There are some overlapped between the two fields of electrets and electric insulation. While quasi-permanently trapped electric-charge and/or large remanent dipole polarization are the requisites for electret operation, stably trapped electric charge in electric insulation helps reduce electric charge transport and overall reduced electric conductivity. Controlled charge trapping can help in preventing further charge injection and accumulation as well as serving as field grading purpose in insulating dielectrics whereas large dipole polarization can be utilized in energy storage applications.
In this thesis, the Piezoelectrically-generated Pressure Steps (PPSs) were employed as a nondestructive method to probe the electric-charge and dipole polarization distribution in a range of thin film (several hundred micron) polymer-based materials, namely polypropylene (PP), low-density polyethylene/magnesium oxide (LDPE/MgO) nanocomposites and poly(vinylidene fluoride-co- trifluoro ethylene) (P(VDF-TrFE)) copolymer. PP film surface-treated with phosphoric acid to introduce surfacial isolated nanostructures serves as example of 2-dimensional nano-composites whereas LDPE/MgO serves as the case of 3-dimensional nano-composites with MgO nano-particles dispersed in LDPE polymer matrix. It is evidenced that the nanoparticles on the surface of acid-treated PP and in the bulk of LDPE/MgO nanocomposites improve charge trapping capacity of the respective material and prevent further charge injection and transport and that the enhanced charge trapping capacity makes PP and LDPE/MgO nanocomposites potential materials for both electret and electrical insulation applications. As for PVDF and VDF-based copolymers, the remanent spatial polarization distribution depends critically on poling method as well as specific parameters used in the respective poling method. In this work, homogeneous polarization poling of P(VDF-TrFE) copolymers with different VDF-contents have been attempted with hysteresis cyclical poling. The behaviour of remanent polarization growth and spatial polarization distribution are reported and discussed. The Piezoelectrically-generated Pressure Steps (PPSs) method has proven as a powerful method for the charge storage and transport characterization of a wide range of polymer material from nonpolar, to polar, to polymer nanocomposites category.
The habilitation deals with the numerical analysis of the recurrence properties of geological and climatic processes. The recurrence of states of dynamical processes can be analysed with recurrence plots and various recurrence quantification options. In the present work, the meaning of the structures and information contained in recurrence plots are examined and described. New developments have led to extensions that can be used to describe the recurring patterns in both space and time. Other important developments include recurrence plot-based approaches to identify abrupt changes in the system's dynamics, to detect and investigate external influences on the dynamics of a system, the couplings between different systems, as well as a combination of recurrence plots with the methodology of complex networks. Typical problems in geoscientific data analysis, such as irregular sampling and uncertainties, are tackled by specific modifications and additions. The development of a significance test allows the statistical evaluation of quantitative recurrence analysis, especially for the identification of dynamical transitions. Finally, an overview of typical pitfalls that can occur when applying recurrence-based methods is given and guidelines on how to avoid such pitfalls are discussed. In addition to the methodological aspects, the application potential especially for geoscientific research questions is discussed, such as the identification and analysis of transitions in past climates, the study of the influence of external factors to ecological or climatic systems, or the analysis of landuse dynamics based on remote sensing data.
In the scenario of the narrow escape problem (NEP) a particle diffuses in a finite container and eventually leaves it through a small 'escape window' in the otherwise impermeable boundary, once it arrives to this window and crosses an entropic barrier at the entrance to it. This generic problem is mathematically identical to that of a diffusion-mediated reaction with a partially-reactive site on the container's boundary. Considerable knowledge is available on the dependence of the mean first-reaction time (FRT) on the pertinent parameters. We here go a distinct step further and derive the full FRT distribution for the NEP. We demonstrate that typical FRTs may be orders of magnitude shorter than the mean one, thus resulting in a strong defocusing of characteristic temporal scales. We unveil the geometry-control of the typical times, emphasising the role of the initial distance to the target as a decisive parameter. A crucial finding is the further FRT defocusing due to the barrier, necessitating repeated escape or reaction attempts interspersed with bulk excursions. These results add new perspectives and offer a broad comprehension of various features of the by-now classical NEP that are relevant for numerous biological and technological systems.
Ultrafast magnetisation dynamics have been investigated intensely for two decades. The recovery process after demagnetisation, however, was rarely studied experimentally and discussed in detail. The focus of this work lies on the investigation of the magnetisation on long timescales after laser excitation. It combines two ultrafast time resolved methods to study the relaxation of the magnetic and lattice system after excitation with a high fluence ultrashort laser pulse. The magnetic system is investigated by time resolved measurements of the magneto-optical Kerr effect. The experimental setup has been implemented in the scope of this work. The lattice dynamics were obtained with ultrafast X-ray diffraction. The combination of both techniques leads to a better understanding of the mechanisms involved in magnetisation recovery from a non-equilibrium condition. Three different groups of samples are investigated in this work: Thin Nickel layers capped with nonmagnetic materials, a continuous sample of the ordered L10 phase of Iron Platinum and a sample consisting of Iron Platinum nanoparticles embedded in a carbon matrix. The study of the remagnetisation reveals a general trend for all of the samples: The remagnetisation process can be described by two time dependences. A first exponential recovery that slows down with an increasing amount of energy absorbed in the system until an approximately linear time dependence is observed. This is followed by a second exponential recovery. In case of low fluence excitation, the first recovery is faster than the second. With increasing fluence the first recovery is slowed down and can be described as a linear function. If the pump-induced temperature increase in the sample is sufficiently high, a phase transition to a paramagnetic state is observed. In the remagnetisation process, the transition into the ferromagnetic state is characterised by a distinct transition between the linear and exponential recovery. From the combination of the transient lattice temperature Tp(t) obtained from ultrafast X-ray measurements and magnetisation M(t) gained from magneto-optical measurements we construct the transient magnetisation versus temperature relations M(Tp). If the lattice temperature remains below the Curie temperature the remagnetisation curve M(Tp) is linear and stays below the M(T) curve in equilibrium in the continuous transition metal layers. When the sample is heated above phase transition, the remagnetisation converges towards the static temperature dependence. For the granular Iron Platinum sample the M(Tp) curves for different fluences coincide, i.e. the remagnetisation follows a similar path irrespective of the initial laser-induced temperature jump.
Due to advances in science and technology towards smaller and more powerful processing units, the fabrication of micrometer sized machines for different tasks becomes more and more possible. Such micro-robots could revolutionize medical treatment of diseases and shall support to work on other small machines. Nevertheless, scaling down robots and other devices is a challenging task and will probably remain limited in near future. Over the past decade the concept of bio-hybrid systems has proved to be a promising approach in order to advance the further development of micro-robots. Bio-hybrid systems combine biological cells with artificial components, thereby benefiting from the functionality of living biological cells. Cell-driven micro-transport is one of the most prominent applications in the emerging field of these systems. So far, micrometer sized cargo has been successfully transported by means of swimming bacterial cells. The potential of motile adherent cells as transport systems has largely remained unexplored.
This thesis concentrates on the social amoeba Dictyostelium discoideum as a potential candidate for an amoeboid bio-hybrid transport system. The use of this model organism comes with several advantages. Due to the unspecific properties of Dictyostelium adhesion, a wide range of different cargo materials can be used for transport. As amoeboid cells exceed bacterial cells in size by one order of magnitude, also the size of an object carried by a single cell can also be much larger for an amoeba. Finally it is possible to guide the cell-driven transport based on the chemotactic behavior of the amoeba. Since cells undergo a developmentally induced chemotactic aggregation, cargo could be assembled in a self-organized manner into a cluster. It is also possible to impose an external chemical gradient to guide the amoeboid transport system to a desired location.
To establish Dictyostelium discoideum as a possible candidate for bio-hybrid transport systems, this thesis will first investigate the movement of single cells. Secondly, the interaction of cargo and cells will be studied. Eventually, a conceptional proof will be conducted, that the cheomtactic behavior can be exploited either to transport a cargo self-organized or through an external chemical source.
In nature as well as in the context of infection and medical applications, bacteria often have to move in highly complex environments such as soil or tissues. Previous studies have shown that bacteria strongly interact with their surroundings and are often guided by confinements. Here, we investigate theoretically how the dispersal of swimming bacteria can be augmented by microfluidic environments and validate our theoretical predictions experimentally. We consider a system of bacteria performing the prototypical run-and-tumble motion inside a labyrinth with square lattice geometry. Narrow channels between the square obstacles limit the possibility of bacteria to reorient during tumbling events to an area where channels cross. Thus, by varying the geometry of the lattice it might be possible to control the dispersal of cells. We present a theoretical model quantifying diffusive spreading of a run-and-tumble random walker in a square lattice. Numerical simulations validate our theoretical predictions for the dependence of the diffusion coefficient on the lattice geometry. We show that bacteria moving in square labyrinths exhibit enhanced dispersal as compared to unconfined cells. Importantly, confinement significantly extends the duration of the phase with strongly non-Gaussian diffusion, when the geometry of channels is imprinted in the density profiles of spreading cells. Finally, in good agreement with our theoretical findings, we observe the predicted behaviors in experiments with E. coli bacteria swimming in a square lattice labyrinth created in amicrofluidic device. Altogether, our comprehensive understanding of bacterial dispersal in a simple two-dimensional labyrinth makes the first step toward the analysis of more complex geometries relevant for real world applications.
Many studies on biological and soft matter systems report the joint presence of a linear mean-squared displacement and a non-Gaussian probability density exhibiting, for instance, exponential or stretched-Gaussian tails. This phenomenon is ascribed to the heterogeneity of the medium and is captured by random parameter models such as ‘superstatistics’ or ‘diffusing diffusivity’. Independently, scientists working in the area of time series analysis and statistics have studied a class of discrete-time processes with similar properties, namely, random coefficient autoregressive models. In this work we try to reconcile these two approaches and thus provide a bridge between physical stochastic processes and autoregressive models.Westart from the basic Langevin equation of motion with time-varying damping or diffusion coefficients and establish the link to random coefficient autoregressive processes. By exploring that link we gain access to efficient statistical methods which can help to identify data exhibiting Brownian yet non-Gaussian diffusion.
Fractional Brownian motion (FBM) is a Gaussian stochastic process with stationary, long-time correlated increments and is frequently used to model anomalous diffusion processes. We study numerically FBM confined to a finite interval with reflecting boundary conditions. The probability density function of this reflected FBM at long times converges to a stationary distribution showing distinct deviations from the fully flat distribution of amplitude 1/L in an interval of length L found for reflected normal Brownian motion. While for superdiffusion, corresponding to a mean squared displacement (MSD) 〈X² (t)〉 ⋍ tᵅ with 1 < α < 2, the probability density function is lowered in the centre of the interval and rises towards the boundaries, for subdiffusion (0 < α < 1) this behaviour is reversed and the particle density is depleted close to the boundaries. The MSD in these cases at long times converges to a stationary value, which is, remarkably, monotonically increasing with the anomalous diffusion exponent α. Our a priori surprising results may have interesting consequences for the application of FBM for processes such as molecule or tracer diffusion in the confines of living biological cells or organelles, or other viscoelastic environments such as dense liquids in microfluidic chambers.
Astandard approach to study time-dependent stochastic processes is the power spectral density (PSD), an ensemble-averaged property defined as the Fourier transform of the autocorrelation function of the process in the asymptotic limit of long observation times, T → ∞. In many experimental situations one is able to garner only relatively few stochastic time series of finite T, such that practically neither an ensemble average nor the asymptotic limit T → ∞ can be achieved. To accommodate for a meaningful analysis of such finite-length data we here develop the framework of single-trajectory spectral analysis for one of the standard models of anomalous diffusion, scaled Brownian motion.Wedemonstrate that the frequency dependence of the single-trajectory PSD is exactly the same as for standard Brownian motion, which may lead one to the erroneous conclusion that the observed motion is normal-diffusive. However, a distinctive feature is shown to be provided by the explicit dependence on the measurement time T, and this ageing phenomenon can be used to deduce the anomalous diffusion exponent.Wealso compare our results to the single-trajectory PSD behaviour of another standard anomalous diffusion process, fractional Brownian motion, and work out the commonalities and differences. Our results represent an important step in establishing singletrajectory PSDs as an alternative (or complement) to analyses based on the time-averaged mean squared displacement.
We show that the codifference is a useful tool in studying the ergodicity breaking and non-Gaussianity properties of stochastic time series. While the codifference is a measure of dependence that was previously studied mainly in the context of stable processes, we here extend its range of applicability to random-parameter and diffusing-diffusivity models which are important in contemporary physics, biology and financial engineering. We prove that the codifference detects forms of dependence and ergodicity breaking which are not visible from analysing the covariance and correlation functions. We also discuss a related measure of dispersion, which is a nonlinear analogue of the mean squared displacement.
Synchronization – the adjustment of rhythms among coupled self-oscillatory systems – is a fascinating dynamical phenomenon found in many biological, social, and technical systems.
The present thesis deals with synchronization in finite ensembles of weakly coupled self-sustained oscillators with distributed frequencies.
The standard model for the description of this collective phenomenon is the Kuramoto model – partly due to its analytical tractability in the thermodynamic limit of infinitely many oscillators. Similar to a phase transition in the thermodynamic limit, an order parameter indicates the transition from incoherence to a partially synchronized state. In the latter, a part of the oscillators rotates at a common frequency. In the finite case, fluctuations occur, originating from the quenched noise of the finite natural frequency sample.
We study intermediate ensembles of a few hundred oscillators in which fluctuations are comparably strong but which also allow for a comparison to frequency distributions in the infinite limit.
First, we define an alternative order parameter for the indication of a collective mode in the finite case. Then we test the dependence of the degree of synchronization and the mean rotation frequency of the collective mode on different characteristics for different coupling strengths.
We find, first numerically, that the degree of synchronization depends strongly on the form (quantified by kurtosis) of the natural frequency sample and the rotation frequency of the collective mode depends on the asymmetry (quantified by skewness) of the sample. Both findings are verified in the infinite limit.
With these findings, we better understand and generalize observations of other authors. A bit aside of the general line of thoughts, we find an analytical expression for the volume contraction in phase space.
The second part of this thesis concentrates on an ordering effect of the finite-size fluctuations. In the infinite limit, the oscillators are separated into coherent and incoherent thus ordered and disordered oscillators. In finite ensembles, finite-size fluctuations can generate additional order among the asynchronous oscillators. The basic principle – noise-induced synchronization – is known from several recent papers. Among coupled oscillators, phases are pushed together by the order parameter fluctuations, as we on the one hand show directly and on the other hand quantify with a synchronization measure from directed statistics between pairs of passive oscillators.
We determine the dependence of this synchronization measure from the ratio of pairwise natural frequency difference and variance of the order parameter fluctuations. We find a good agreement with a simple analytical model, in which we replace the deterministic fluctuations of the order parameter by white noise.
Organic semiconductors are a promising class of materials. Their special properties are the particularly good absorption, low weight and easy processing into thin films. Therefore, intense research has been devoted to the realization of thin film organic solar cells (OPVs). Because of the low dielectric constant of organic semiconductors, primary excitations (excitons) are strongly bound and a type II heterojunction needs to be introduced to split these excitations into free charges. Therefore, most organic solar cells consist of at least an electron donor and electron acceptor material. For such donor acceptor systems mainly three states are relevant; the photoexcited exciton on the donor or acceptor material, the charge transfer state at the donor-acceptor interface and the charge separated state of a free electron and hole. The interplay between these states significantly determines the efficiency of organic solar cells. Due to the high absorption and the low charge carrier mobilities, the active layers are usually thin but also, exciton dissociation and free charge formation proceeds rapidely, which makes the study of carrier dynamics highly challenging.
Therefore, the focus of this work was first to install new experimental setups for the investigation of the charge carrier dynamics in complete devices with superior sensitivity and time resolution and, second, to apply these methods to prototypical photovoltaic materials to address specific questions in the field of organic and hybrid photovoltaics.
Regarding the first goal, a new setup combining transient absorption spectroscopy (TAS) and time delayed collection field (TDCF) was designed and installed in Potsdam. An important part of this work concerned the improvement of the electronic components with respect to time resolution and sensitivity. To this end, a highly sensitive amplifier for driving and detecting the device response in TDCF was developed. This system was then applied to selected organic and hybrid model systems with a particular focus on the understanding of the loss mechanisms that limit the fill factor and short circuit current of organic solar cells.
The first model system was a hybrid photovoltaic material comprising inorganic quantum dots decorated with organic ligands. Measurements with TDCF revealed fast free carrier recombination, in part assisted by traps, while bias-assisted charge extraction measurements showed high mobility. The measured parameters then served as input for a successful description of the device performance with an analytical model.
With a further improvement of the instrumentation, a second topic was the detailed analysis of non-geminate recombination in a disordered polymer:fullerene blend where an important question was the effect of disorder on the carrier dynamics. The measurements revealed that early time highly mobile charges undergo fast non-geminate recombination at the contacts, causing an apparent field dependence of free charge generation in TDCF experiments if not conducted properly. On the other hand, recombination the later time scale was determined by dispersive recombination in the bulk of the active layer, showing the characteristics of carrier dynamics in an exponential density of state distribution. Importantly, the comparison with steady state recombination data suggested a very weak impact of non-thermalized carriers on the recombination properties of the solar cells under application relevant illumination conditions.
Finally, temperature and field dependent studies of free charge generation were performed on three donor-acceptor combinations, with two donor polymers of the same material family blended with two different fullerene acceptor molecules. These particular material combinations were chosen to analyze the influence of the energetic and morphology of the blend on the efficiency of charge generation. To this end, activation energies for photocurrent generation were accurately determined for a wide range of excitation energies. The results prove that the formation of free charge is via thermalized charge transfer states and does not involve hot exciton splitting. Surprisingly, activation energies were of the order of thermal energy at room temperature. This led to the important conclusion that organic solar cells perform well not because of predominate high energy pathways but because the thermalized CT states are weakly bound. In addition, a model is introduced to interconnect the dissociation efficiency of the charge transfer state with its recombination observable with photoluminescence, which rules out a previously proposed two-pool model for free charge formation and recombination. Finally, based on the results, proposals for the further development of organic solar cells are formulated.
Membrane adhesion is a fundamental biological process in which membranes are attached to neighboring membranes or surfaces. Membrane adhesion emerges from a complex interplay between the binding of membrane-anchored receptors/ligands and the membrane properties. In this work, we study membrane adhesion mediated by lipid-anchored saccharides using microsecond-long full-atomistic molecular dynamics simulations. Motivated by neutron scattering experiments on membrane adhesion via lipid-anchored saccharides, we investigate the role of LeX, Lac1, and Lac2 saccharides and membrane fluctuations in membrane adhesion.
We study the binding of saccharides in three different systems: for saccharides in water, for saccharides anchored to essentially planar membranes at fixed separations, and for saccharides anchored to apposing fluctuating membranes. Our simulations of two saccharides in water indicate that the saccharides engage in weak interactions to form dimers. We find that the binding occurs in a continuum of bound states instead of a certain number of well-defined bound structures, which we term as "diffuse binding".
The binding of saccharides anchored to essentially planar membranes strongly depends on separation of the membranes, which is fixed in our simulation system. We show that the binding constants for trans-interactions of two lipid-anchored saccharides monotonically decrease with increasing separation. Saccharides anchored to the same membrane leaflet engage in cis-interactions with binding constants comparable to the trans-binding constants at the smallest membrane separations. The interplay of cis- and trans-binding can be investigated in simulation systems with many lipid-anchored saccharides. For Lac2, our simulation results indicate a positive cooperativity of trans- and cis-binding. In this cooperative binding the trans-binding constant is enhanced by the cis-interactions. For LeX, in contrast, we observe no cooperativity between trans- and cis-binding. In addition, we determine the forces generated by trans-binding of lipid-anchored saccharides in planar membranes from the binding-induced deviations of the lipid-anchors. We find that the forces acting on trans-bound saccharides increase with increasing membrane separation to values of the order of 10 pN.
The binding of saccharides anchored to the fluctuating membranes results from an interplay between the binding properties of the lipid-anchored saccharides and membrane fluctuations. Our simulations, which have the same average separation of the membranes as obtained from the neutron scattering experiments, yield a binding constant larger than in planar membranes with the same separation. This result demonstrates that membrane fluctuations play an important role at average membrane separations which are seemingly too large for effective binding. We further show that the probability distribution of the local separation can be well approximated by a Gaussian distribution. We calculate the relative membrane roughness and show that our results are in good agreement with the roughness values reported from the neutron scattering experiments.
In this work we investigated ultrafast demagnetization in a Heusler-alloy. This material belongs to the halfmetal and exists in a ferromagnetic phase. A special feature of investigated alloy is a structure of electronic bands. The last leads to the specific density of the states. Majority electrons form a metallic like structure while minority electrons form a gap near the Fermi-level, like in semiconductor. This particularity offers a good possibility to use this material as model-like structure and to make some proof of principles concerning demagnetization. Using pump-probe experiments we carried out time-resolved measurements to figure out the times of demagnetization. For the pumping we used ultrashort laser pulses with duration around 100 fs. Simultaneously we used two excitation regimes with two different wavelengths namely 400 nm and 1240 nm. Decreasing the energy of photons to the gap size of the minority electrons we explored the effect of the gap on the demagnetization dynamics. During this work we used for the first time OPA (Optical Parametrical Amplifier) for the generation of the laser irradiation in a long-wave regime. We tested it on the FETOSPEX-beamline in BASSYII electron storage ring. With this new technique we measured wavelength dependent demagnetization dynamics. We estimated that the demagnetization time is in a correlation with photon energy of the excitation pulse. Higher photon energy leads to the faster demagnetization in our material. We associate this result with the existence of the energy-gap for minority electrons and explained it with Elliot-Yaffet-scattering events. Additionally we applied new probe-method for magnetization state in this work and verified their effectivity. It is about the well-known XMCD (X-ray magnetic circular dichroism) which we adopted for the measurements in reflection geometry. Static experiments confirmed that the pure electronic dynamics can be separated from the magnetic one. We used photon energy fixed on the L3 of the corresponding elements with circular polarization. Appropriate incidence angel was estimated from static measurements. Using this probe method in dynamic measurements we explored electronic and magnetic dynamics in this alloy.
We measure valence-to-core x-ray emission spectra of compressed crystalline GeO₂ up to 56 GPa and of amorphous GeO₂ up to 100 GPa. In a novel approach, we extract the Ge coordination number and mean Ge-O distances from the emission energy and the intensity of the Kβ'' emission line. The spectra of high-pressure polymorphs are calculated using the Bethe-Salpeter equation. Trends observed in the experimental and calculated spectra are found to match only when utilizing an octahedral model. The results reveal persistent octahedral Ge coordination with increasing distortion, similar to the compaction mechanism in the sequence of octahedrally coordinated crystalline GeO₂ high-pressure polymorphs.
Force plays a fundamental role in the regulation of biological processes. Cells can sense the mechanical properties of the extracellular matrix (ECM) by applying forces and transmitting mechanical signals. They further use mechanical information for regulating a wide range of cellular functions, including adhesion, migration, proliferation, as well as differentiation and apoptosis. Even though it is well understood that mechanical signals play a crucial role in directing cell fate, surprisingly little is known about the range of forces that define cell-ECM interactions at the molecular level.
Recently, synthetic molecular force sensor (MFS) designs have been established for measuring the molecular forces acting at the cell-ECM interface. MFSs detect the traction forces generated by cells and convert this mechanical input into an optical readout. They are composed of calibrated mechanoresponsive building blocks and are usually equipped with a fluorescence reporter system. Up to date, many different MFS designs have been introduced and successfully used for measuring forces involved in the adhesion of mammalian cells. These MFSs utilize different molecular building blocks, such as double-stranded deoxyribonucleic acid (dsDNA) molecules, DNA hairpins and synthetic polymers like polyethylene glycol (PEG). These currently available MFS designs lack ECM mimicking properties.
In this work, I introduce a new MFS building block for cell biology applications, derived from the natural ECM. It combines mechanical tunability with the ability to mimic the native cellular microenvironment. Inspired by structural ECM proteins with load bearing function, this new MFS design utilizes coiled coil (CC)-forming peptides. CCs are involved in structural and mechanical tasks in the cellular microenvironment and many of the key protein components of the cytoskeleton and the ECM contain CC structures. The well-known folding motif of CC structures, an easy synthesis via solid phase methods and the many roles CCs play in biological processes have inspired studies to use CCs as tunable model systems for protein design and assembly. All these properties make CCs ideal candidates as building blocks for MFSs. In this work, a series of heterodimeric CCs were designed, characterized and further used as molecular building blocks for establishing a novel, next-generation MFS prototype.
A mechanistic molecular understanding of their structural response to mechanical load is essential for revealing the sequence-structure-mechanics relationships of CCs. Here, synthetic heterodimeric CCs of different length were loaded in shear geometry and their mechanical response was investigated using a combination of atomic force microscope (AFM)-based single-molecule force spectroscopy (SMFS) and steered molecular dynamics (SMD) simulations. SMFS showed that the rupture forces of short heterodimeric CCs (3-5 heptads) lie in the range of 20-50 pN, depending on CC length, pulling geometry and the applied loading rate (dF/dt). Upon shearing, an initial rise in the force, followed by a force plateau and ultimately strand separation was observed in SMD simulations. A detailed structural analysis revealed that CC response to shear load depends on the loading rate and involves helix uncoiling, uncoiling-assisted sliding in the direction of the applied force and uncoiling-assisted dissociation perpendicular to the force axis.
The application potential of these mechanically characterized CCs as building blocks for MFSs has been tested in 2D cell culture applications with the goal of determining the threshold force for cell adhesion. Fully calibrated, 4- to 5-heptad long, CC motifs (CC-A4B4 and CC-A5B5) were used for functionalizing glass surfaces with MFSs. 3T3 fibroblasts and endothelial cells carrying mutations in a signaling pathway linked to cell adhesion and mechanotransduction processes were used as model systems for time-dependent adhesion experiments. A5B5-MFS efficiently supported cell attachment to the functionalized surfaces for both cell types, while A4B4-MFS failed to maintain attachment of 3T3 fibroblasts after the first 2 hours of initial cell adhesion. This difference in cell adhesion behavior demonstrates that the magnitude of cell-ECM forces varies depending on the cell type and further supports the application potential of CCs as mechanoresponsive and tunable molecular building blocks for the development of next-generation protein-based MFSs.This novel CC-based MFS design is expected to provide a powerful new tool for observing cellular mechanosensing processes at the molecular level and to deliver new insights into the mechanisms and forces involved. This MFS design, utilizing mechanically tunable CC building blocks, will not only allow for measuring the molecular forces acting at the cell-ECM interface, but also yield a new platform for the development of mechanically controlled materials for a large number of biological and medical applications.
A reliable inference of networks from data is of key interest in many scientific fields. Several methods have been suggested in the literature to reliably determine links in a network. These techniques rely on statistical methods, typically controlling the number of false positive links, but not considering false negative links. In this thesis new methodologies to improve network inference are suggested. Initial analyses demonstrate the impact of falsepositive and false negative conclusions about the presence or absence of links on the resulting inferred network. Consequently, revealing the importance of making well-considered choices leads to suggest new approaches to enhance existing network reconstruction methods.
A simulation study, presented in Chapter 3, shows that different values to balance false positive and false negative conclusions about links should be used in order to reliably estimate network characteristics. The existence of type I and type II errors in the reconstructed network, also called biased network, is accepted. Consequently, an analytic method that describes the influence of these two errors on the network structure is explored. As a result of this analysis, an analytic formula of the density of the biased vertex degree distribution is found (Chapter 4).
In the inverse problem, the vertex degree distribution of the true underlying network is analytically reconstructed, assuming the probabilities of type I and type II errors. Chapters 4-5 show that the method is robust to incorrect estimates of α and β within reasonable limits. In Chapter 6, an iterative procedure to enhance this method is presented in the case of large errors on the estimates of α and β.
The investigations presented so far focus on the influence of false positive and false negative links on the network characteristics. In Chapter 7, the analysis is reversed - the study focuses on the influence of network characteristics on the probability of type I and type II errors, in the case of networks of coupled oscillators. The probabilities of α and β are influenced by the shortest path length and the detour degree, respectively. These results have been used to improve the network reconstruction, when the true underlying network is not known a priori, introducing a novel and advanced concept of threshold.
Advancing charge selective contacts for efficient monolithic perovskite-silicon tandem solar cells
(2019)
Hybrid organic-inorganic perovskites are one of the most promising material classes for photovoltaic energy conversion. In solar cells, the perovskite absorber is sandwiched between n- and p-type contact layers which selectively transport electrons and holes to the cell’s cathode and anode, respectively. This thesis aims to advance contact layers in perovskite solar cells and unravel the impact of interface and contact properties on the device performance. Further, the contact materials are applied in monolithic perovskite-silicon heterojunction (SHJ) tandem solar cells, which can overcome the single junction efficiency limits and attract increasing attention. Therefore, all contact layers must be highly transparent to foster light harvesting in the tandem solar cell design. Besides, the SHJ device restricts processing temperatures for the selective contacts to below 200°C.
A comparative study of various electron selective contact materials, all processed below 180°C, in n-i-p type perovskite solar cells highlights that selective contacts and their interfaces to the absorber govern the overall device performance. Combining fullerenes and metal-oxides in a TiO2/PC60BM (phenyl-C60-butyric acid methyl ester) double-layer contact allows to merge good charge extraction with minimized interface recombination. The layer sequence thereby achieved high stabilized solar cell performances up to 18.0% and negligible current-voltage hysteresis, an otherwise pronounced phenomenon in this device design. Double-layer structures are therefore emphasized as a general concept to establish efficient and highly selective contacts.
Based on this success, the concept to combine desired properties of different materials is transferred to the p-type contact. Here, a mixture of the small molecule Spiro-OMeTAD [2,2’,7,7’-tetrakis(N,N-di-p-methoxyphenylamine)-9,9’-spirobifluoren] and the doped polymer PEDOT [poly(3,4-ethylenedioxythiophene)] is presented as a novel hole selective contact. PEDOT thereby remarkably suppresses charge recombination at the perovskite surface, allowing an increase of quasi-Fermi level splitting in the absorber. Further, the addition of Spiro-OMeTAD into the PEDOT layer is shown to enhance charge extraction at the interface and allow high efficiencies up to 16.8%.
Finally, the knowledge on contact properties is applied to monolithic perovskite-SHJ tandem solar cells. The main goal is to optimize the top contact stack of doped Spiro-OMeTAD/molybdenum oxide(MoOx)/ITO towards higher transparency by two different routes. First, fine-tuning of the ITO deposition to mitigate chemical reduction of MoOx and increase the transmittance of MoOx/ITO stacks by 25%. Second, replacing Spiro-OMeTAD with the alternative hole transport materials PEDOT/Spiro-OMeTAD mixtures, CuSCN or PTAA [poly(triaryl amine)]. Experimental results determine layer thickness constrains and validate optical simulations, which subsequently allow to realistically estimate the respective tandem device performances. As a result, PTAA represents the most promising replacement for Spiro-OMeTAD, with a projected increase of the optimum tandem device efficiency for the herein used architecture by 2.9% relative to 26.5% absolute. The results also reveal general guidelines for further performance gains of the technology.
Kosmologie beschreibt die Entwicklung des Universums als Ganzes. Kosmologische Entdeckungen in Theorie und Praxis haben daher unser modernes wissenschaftliches Weltbild entscheidend geprägt. Die Vermittlung eines modernen Weltbildes durch Unterricht ist ein häufiger Wunsch in der naturwissenschaftlichen Bildungsdiskussion. Dennoch existieren weiterhin Forschungs- und Entwicklungsbedarfe. Kosmologische Themen finden sich häufig in den Medien und sind gleichzeitig weiter vom Alltag entfernt, so dass sich hier besonders leicht wissenschaftlich inkorrekte Vorstellungen entwickeln können, die zu Problemen im Unterricht führen können.
Das Ziel dieser wissenschaftlichen Arbeit ist es, zu diesem Forschungsgebiet beizutragen und die Voraussetzungen hinsichtlich vorhandener Vorkenntnisse und Präkonzepte in Kosmologie, mit denen Schülerinnen und Schüler in den Unterricht kommen, zu untersuchen und anschließend mit denen anderer Länder zu vergleichen. Dies erfolgt anhand einer qualitativen Inhaltsanalyse eines offenen Fragebogens. Auf dieser Grundlage wird schließlich ein Multiple-Choice Fragebogen entwickelt, angewendet und evaluiert.
Die Ergebnisse zeigen große Wissenslücken im Bereich der Kosmologie auf und geben erste Hinweise auf vorhandene Unterschiede zwischen den Ländern. Es existieren ebenfalls einige teils weit verbreitete wissenschaftlich inkorrekte Vorstellungen wie beispielsweise die Assoziation des Urknalls mit einer Explosion, der Urknall verursacht durch eine Kollision von Teilchen oder größeren Objekten, oder die Vorstellung der Ausdehnung des Universums als neue Entdeckungen und/oder Wissen. Des Weiteren gab nur etwa jeder Fünfte das korrekte Alter des Universums oder die Ausdehnung des Universums als einen der drei Belege der Urknalltheorie an, während fast 40% keinen einzigen Beleg nennen konnten. Für den geschlossenen Fragebogen konnten gute Hinweise für verschiedene Validitätsaspekte herausgearbeitet werden und es existieren erste Hinweise darauf, dass der Fragebogen Wissenszuwachs messen kann und damit wahrscheinlich zur Untersuchung der Wirksamkeit von Lerneinheiten eingesetzt werden kann. Auch ein entsprechendes Modell zur Verständnisentwicklung der Ausdehnung des Universums zeigte sich vielversprechend.
Diese Arbeit liefert insgesamt einen Forschungsbeitrag zum Schülervorwissen und Vorstellungen in der Kosmologie und deren Large Scale Assessment. Dies eröffnet die Möglichkeit zukünftiger Forschungen im Bereich von Gruppenvergleichen insbesondere hinsichtlich objektiver Ländervergleiche sowie der Untersuchungen der Wirksamkeit von einzelnen Lerneinheiten als auch Vergleiche verschiedener Lerneinheiten untereinander.
Abstract
The emerging diffusive dynamics in many complex systems show a characteristic crossover behaviour from anomalous to normal diffusion which is otherwise fitted by two independent power-laws. A prominent example for a subdiffusive–diffusive crossover are viscoelastic systems such as lipid bilayer membranes, while superdiffusive–diffusive crossovers occur in systems of actively moving biological cells. We here consider the general dynamics of a stochastic particle driven by so-called tempered fractional Gaussian noise, that is noise with Gaussian amplitude and power-law correlations, which are cut off at some mesoscopic time scale. Concretely we consider such noise with built-in exponential or power-law tempering, driving an overdamped Langevin equation (fractional Brownian motion) and fractional Langevin equation motion. We derive explicit expressions for the mean squared displacement and correlation functions, including different shapes of the crossover behaviour depending on the concrete tempering, and discuss the physical meaning of the tempering. In the case of power-law tempering we also find a crossover behaviour from faster to slower superdiffusion and slower to faster subdiffusion. As a direct application of our model we demonstrate that the obtained dynamics quantitatively describes the subdiffusion–diffusion and subdiffusion–subdiffusion crossover in lipid bilayer systems. We also show that a model of tempered fractional Brownian motion recently proposed by Sabzikar and Meerschaert leads to physically very different behaviour with a seemingly paradoxical ballistic long time scaling.