530 Physik
Refine
Has Fulltext
- yes (26) (remove)
Year of publication
- 2019 (26) (remove)
Document Type
- Doctoral Thesis (13)
- Postprint (12)
- Habilitation Thesis (1)
Is part of the Bibliography
- yes (26)
Keywords
- anomalous diffusion (4)
- diffusion (4)
- Magnetisierungsdynamik (2)
- silicon (2)
- Bio-Hybrid (1)
- Brownian yet non-Gaussian diffusion (1)
- CU (1)
- Carbonfaser Herstellung (1)
- Chemotaxsis (1)
- Computertomographie (1)
Open-circuit voltages of lead-halide perovskite solar cells are improving rapidly and are approaching the thermodynamic limit. Since many different perovskite compositions with different bandgap energies are actively being investigated, it is not straightforward to compare the open-circuit voltages between these devices as long as a consistent method of referencing is missing. For the purpose of comparing open-circuit voltages and identifying outstanding values, it is imperative to use a unique, generally accepted way of calculating the thermodynamic limit, which is currently not the case. Here a meta-analysis of methods to determine the bandgap and a radiative limit for open-circuit voltage is presented. The differences between the methods are analyzed and an easily applicable approach based on the solar cell quantum efficiency as a general reference is proposed.
We study travelling chimera states in a ring of nonlocally coupled heterogeneous (with Lorentzian distribution of natural frequencies) phase oscillators. These states are coherence-incoherence patterns moving in the lateral direction because of the broken reflection symmetry of the coupling topology. To explain the results of direct numerical simulations we consider the continuum limit of the system. In this case travelling chimera states correspond to smooth travelling wave solutions of some integro-differential equation, called the Ott–Antonsen equation, which describes the long time coarse-grained dynamics of the oscillators. Using the Lyapunov–Schmidt reduction technique we suggest a numerical approach for the continuation of these travelling waves. Moreover, we perform their linear stability analysis and show that travelling chimera states can lose their stability via fold and Hopf bifurcations. Some of the Hopf bifurcations turn out to be supercritical resulting in the observation of modulated travelling chimera states.
Using two crystals for spontaneous parametric down-conversion in a parallel setup, we observe two-photon interference with high visibility. The high visibility is consistent with complementarity and the absence of which-path information. The observations are explained as the effects of entanglement or equivalently in terms of interfering probability amplitudes and also by the calculation of a second-order field correlation function in the Heisenberg picture. The latter approach brings out explicitly the role of the vacuum fields in the down-conversion at the crystals and in the photon coincidence counting. For comparison, we show that the Hong–Ou–Mandel dip can be explained by the same approach in which the role of the vacuum signal and idler fields, as opposed to entanglement involving vacuum states, is emphasized. We discuss the fundamental limitations of a theory in which these vacuum fields are treated as classical, stochastic fields.
Solar wind observations show that geomagnetic storms are mainly driven by interplanetary coronal mass ejections (ICMEs) and corotating or stream interaction regions (C/SIRs). We present a binary classifier that assigns one of these drivers to 7,546 storms between 1930 and 2015 using ground‐based geomagnetic field observations only. The input data consists of the long‐term stable Hourly Magnetospheric Currents index alongside the corresponding midlatitude geomagnetic observatory time series. This data set provides comprehensive information on the global storm time magnetic disturbance field, particularly its spatial variability, over eight solar cycles. For the first time, we use this information statistically with regard to an automated storm driver identification. Our supervised classification model significantly outperforms unskilled baseline models (78% accuracy with 26[19]% misidentified interplanetary coronal mass ejections [corotating or stream interaction regions]) and delivers plausible driver occurrences with regard to storm intensity and solar cycle phase. Our results can readily be used to advance related studies fundamental to space weather research, for example, studies connecting galactic cosmic ray modulation and geomagnetic disturbances. They are fully reproducible by means of the underlying open‐source software (Pick, 2019, http://doi.org/10.5880/GFZ.2.3.2019.003)
Carbonfasern haben sich in der Luft- und Raumfahrt etabliert und gewinnen in Alltagsanwendungen wie dem Automobilbereich, Windkraft- und Sportbereich durch ihre hohen Zugfestigkeiten, insbesondere ihrer hohen E-Moduli, und ihrer geringen Dichte immer mehr an Bedeutung. Auf Grund ihrer hohen Kosten, welche sich zur Hälfte aus der Precursorherstellung, inklusive seiner Synthese und seinem Verspinnprozess, dem Lösungsspinnverfahren, ergeben, erhalten zunehmend alternative und schmelzspinnbare Precursoren Interesse. Für die Carbonfaserherstellung wird fast ausschließlich Polyacrylnitril (PAN) verwendet, das vor dem Schmelzen irreversible exotherme Zyklisierungsreaktionen aufweist, welchen sich seine Zersetzung anschließt. Eine Möglichkeit der Reduzierung der Schmelztemperatur von Polymeren ist die Einbringung von Comonomeren zur Erhöhung des freien Volumens und die Reduzierung der intermolekularen Wechselwirkungen als interne Weichmacher. Wie am Fraunhofer IAP gezeigt wurde, kann mittels 2-Methoxyethylacrylat (MEA) die Schmelztemperatur zu neuartigen PAN-basierten Precursoren verringert werden. Um den PAN-co-MEA-Precursor für die nachfolgenden Prozessschritte der Carbonfaserherstellung zu verwenden, müssen die thermoplastischen Fasern in thermisch stabile Fasern ohne thermoplastisches Verhalten überführt werden. Es wurde ein neuer Prozessschritt (Prästabilisierung) eingeführt, welcher unter alkalischen Bedingungen zur Abspaltung der Comonomerseitenkette führt. Neben der Esterhydrolyse finden Reaktionen statt, welche an diesem Material noch nicht hinreichend untersucht wurden. Weiterhin stellt sich die Frage nach der Kinetik der Prästabilisierung und der Ermittlung einer geeigneten Prozessführung.
Hierzu wurde die Prästabilisierung in den Labormaßstab überführt und die möglichen Zusammensetzungen des aus DMSO und einer KOH-Lösung bestehenden Reaktionsmediums evaluiert. Weiterhin wurde die Behandlung bei verschiedenen Prästabilisierungszeiten von maximal 30 min und Temperaturen von 40, 50 und 60 °C durchgeführt, um primär mittels NMR-Spektroskopie die chemischen Strukturänderungen aufzuklären. Die Esterhydrolyse des Comonomers, welche zur Abspaltung des 2-Methoxyethanols führt, wurde mittels 1H-NMR-spektroskopischer Untersuchungen detektiert.
Es wurde ein Modell aufgestellt, das die chemisch-physikalischen Strukturänderungen während der Prästabilisierung aufzeigt. Die zuerst ablaufende Reaktion ist die Esterhydrolyse am Comonomer, welche vom Faserrand nach innen verläuft und durch die Präsenz des DMSO in Kombination mit der KOH-Lösung (Superbase) initiiert wird. Der zeitliche Reaktionsverlauf der Esterhydrolyse kann in drei Bereiche eingeteilt werden. Der erste Bereich ab dem Prästabilisierungsbeginn wird durch die Diffusion der basischen Anionen in die Faser, der zweite Bereich durch die Reaktion an der Estergruppe des Comonomers und der dritte Bereich durch letzte Reaktionen im Faserinneren und diffusiven Prozessen der Produkte und Edukte charakterisiert. Der zweite Bereich kann mit einer Reaktion pseudo 1. Ordnung abgebildet werden, da in diesem Bereich bereits eine ausreichende Diffusion der Edukte in die Faser stattgefunden hat. Bei 50 °C spielt die Diffusion im ersten Bereich im Vergleich zur Reaktion eine untergeordnete Rolle. Mit Erhöhung der Temperatur auf 60 °C kann eine im Verhältnis geringere Diffusions- als Reaktionsgeschwindigkeit beobachtet werden. Die Nebenreaktionen wurden mittels 13C-CP/MAS-NMR-spektroskopischen, elementaranlaytischen Untersuchungen sowie Doppelbrechungsmessungen charakterisiert. Während der alkalischen Esterhydrolyse beginnt die Reduzierung der Nitrilgruppen unter der Bildung von primären Carbonsäureamiden und Carbonsäuren. Zur Beschreibung dieser Umsetzung wurde eine Methode entwickelt, welche die Addition von 13C-CP/MAS-NMR-Spektren der Modellsubstanzen PAN, PAM und PAA beinhaltet. Weitere stattfindende Reaktionen sind die Bildung von konjugierten Doppelbindungen, welche insbesondere auf eine Zyklisierung der Nitrile hinweisen. Die nasschemisch initiierte Zyklisierung der Nitrilgruppen kann zu kürzeren Stabilisierungszeiten und einem besser kontrollierbaren Stabilisierungsprozess durch geringere Wärmefreisetzung und schlussendlich zu einer Kostenersparnis des gesamten Verfahrens führen. Die Umsetzung der Nitrilgruppen konnte mit einer Reaktion pseudo 1. Ordnung gut abgebildet werden. DMSO initiiert die Esterhydrolyse, wobei die KOH-Konzentration einen höheren Einfluss auf die Reaktionsgeschwindigkeit der Ester- und Nitrilhydrolyse als die DMSO-Konzentration besitzt. Beide Reaktionen zeigen eine vergleichbare Abhängigkeit von der Temperatur. Die Erhöhung der Prästabilisierungszeit und der KOH- bzw. DMSO-Konzentration führt zur Migration niedermolekularer Bestandteile des Fasermaterials an die Oberfläche und der Bildung punktueller Ablagerungen bis hin zu miteinander verbundenen Einzelfasern. Eine weitere Erhöhung der Prästabilisierungszeit bzw. der Konzentration führt zu einem steigenden Carbonsäureanteil und zur Quellung des Fasermaterials, wodurch die Ablagerungen in das Reaktionsmedium diffundieren. Die Ablagerungen enthalten Chlor, welches durch den Waschvorgang mit HCl in das Materialsystem gelangt ist und durch Parameteranpassungen reduziert wurde. Die schmelzbaren Fasern konnten durch die Prästabilisierung erfolgreich über eine Kern-Mantel-Struktur in nicht-thermoplastische Fasern überführt werden.
Zur Ermittlung eines geeigneten Prozessfensters für nachfolgende thermische Beanspruchungen der prästabilisierten Fasern wurden drei Kriterien identifiziert, anhand welcher die Evaluation erfolgte. Das erste Kriterium beinhaltet die Notwendigkeit der vollständigen Aufhebung der thermoplastischen Eigenschaft der Fasern. Als zweites Kriterium diente die Fasermorphologie. Anhand von REM-Aufnahmen wurden Faserbündel mit separierten Einzelfasern ohne Ablagerungen für die nachfolgende Stabilisierung ausgewählt. Das dritte Kriterium bezieht sich auf eine möglichst geringe Umsetzung der Nitrilgruppen, um Prästabilisierungsbedingungen mit Nebenreaktionen zu vermeiden.
Aus den Untersuchungen konnte eine Prästabilisierungstemperatur von 60 °C als geeignet identifiziert werden. Weiterhin führen hoch alkalische Zusammensetzungen des Reaktionsmediums mit KOH-Konzentrationen von 1, 1,5 und 2 M, vorzugsweise 1,5 M und 50 vol% DMSO mit Reaktionszeiten von unter 10 min zu geeigneten Fasern. Ein MEA-Anteil unterhalb von 2 mol% bewirkt eine Überführung in die Unschmelzbarkeit. Thermisch stabile und für die nachfolgende Stabilisierung geeignete Fasern besitzen weiterhin 68 – 80 mol% Nitrilgruppen, 20 – 25 mol% Carbonsäuren, bis zu 15 mol% primäre Carbonsäureamide und zyklisierte Strukturen.
Additive Manufacturing (AM) in terms of laser powder-bed fusion (L-PBF) offers new prospects regarding the design of parts and enables therefore the production of lattice structures. These lattice structures shall be implemented in various industrial applications (e.g. gas turbines) for reasons of material savings or cooling channels. However, internal defects, residual stress, and structural deviations from the nominal geometry are unavoidable.
In this work, the structural integrity of lattice structures manufactured by means of L-PBF was non-destructively investigated on a multiscale approach.
A workflow for quantitative 3D powder analysis in terms of particle size, particle shape, particle porosity, inter-particle distance and packing density was established. Synchrotron computed tomography (CT) was used to correlate the packing density with the particle size and particle shape. It was also observed that at least about 50% of the powder porosity was released during production of the struts.
Struts are the component of lattice structures and were investigated by means of laboratory CT. The focus was on the influence of the build angle on part porosity and surface quality. The surface topography analysis was advanced by the quantitative characterisation of re-entrant surface features. This characterisation was compared with conventional surface parameters showing their complementary information, but also the need for AM specific surface parameters.
The mechanical behaviour of the lattice structure was investigated with in-situ CT under compression and successive digital volume correlation (DVC). The deformation was found to be knot-dominated, and therefore the lattice folds unit cell layer wise.
The residual stress was determined experimentally for the first time in such lattice structures. Neutron diffraction was used for the non-destructive 3D stress investigation. The principal stress directions and values were determined in dependence of the number of measured directions. While a significant uni-axial stress state was found in the strut, a more hydrostatic stress state was found in the knot. In both cases, strut and knot, seven directions were at least needed to find reliable principal stress directions.
Electrets are dielectrics with quasi-permanent electric charge and/or dipoles, sometimes can be regarded as an electric analogy to a magnet. Since the discovery of the excellent charge retention capacity of poly(tetrafluoro ethylene) and the invention of the electret microphone, electrets have grown out of a scientific curiosity to an important application both in science and technology. The history of electret research goes hand in hand with the quest for new materials with better capacity at charge and/or dipole retention. To be useful, electrets normally have to be charged/poled to render them electro-active. This process involves electric-charge deposition and/or electric dipole orientation within the dielectrics ` surfaces and bulk. Knowledge of the spatial distribution of electric charge and/or dipole polarization after their deposition and subsequent decay is crucial in the task to improve their stability in the dielectrics.
Likewise, for dielectrics used in electrical insulation applications, there are also needs for accumulated space-charge and polarization spatial profiling. Traditionally, space-charge accumulation and large dipole polarization within insulating dielectrics is considered undesirable and harmful to the insulating dielectrics as they might cause dielectric loss and could lead to internal electric field distortion and local field enhancement. High local electric field could trigger several aging processes and reduce the insulating dielectrics' lifetime. However, with the advent of high-voltage DC transmission and high-voltage capacitor for energy storage, these are no longer the case. There are some overlapped between the two fields of electrets and electric insulation. While quasi-permanently trapped electric-charge and/or large remanent dipole polarization are the requisites for electret operation, stably trapped electric charge in electric insulation helps reduce electric charge transport and overall reduced electric conductivity. Controlled charge trapping can help in preventing further charge injection and accumulation as well as serving as field grading purpose in insulating dielectrics whereas large dipole polarization can be utilized in energy storage applications.
In this thesis, the Piezoelectrically-generated Pressure Steps (PPSs) were employed as a nondestructive method to probe the electric-charge and dipole polarization distribution in a range of thin film (several hundred micron) polymer-based materials, namely polypropylene (PP), low-density polyethylene/magnesium oxide (LDPE/MgO) nanocomposites and poly(vinylidene fluoride-co- trifluoro ethylene) (P(VDF-TrFE)) copolymer. PP film surface-treated with phosphoric acid to introduce surfacial isolated nanostructures serves as example of 2-dimensional nano-composites whereas LDPE/MgO serves as the case of 3-dimensional nano-composites with MgO nano-particles dispersed in LDPE polymer matrix. It is evidenced that the nanoparticles on the surface of acid-treated PP and in the bulk of LDPE/MgO nanocomposites improve charge trapping capacity of the respective material and prevent further charge injection and transport and that the enhanced charge trapping capacity makes PP and LDPE/MgO nanocomposites potential materials for both electret and electrical insulation applications. As for PVDF and VDF-based copolymers, the remanent spatial polarization distribution depends critically on poling method as well as specific parameters used in the respective poling method. In this work, homogeneous polarization poling of P(VDF-TrFE) copolymers with different VDF-contents have been attempted with hysteresis cyclical poling. The behaviour of remanent polarization growth and spatial polarization distribution are reported and discussed. The Piezoelectrically-generated Pressure Steps (PPSs) method has proven as a powerful method for the charge storage and transport characterization of a wide range of polymer material from nonpolar, to polar, to polymer nanocomposites category.
The habilitation deals with the numerical analysis of the recurrence properties of geological and climatic processes. The recurrence of states of dynamical processes can be analysed with recurrence plots and various recurrence quantification options. In the present work, the meaning of the structures and information contained in recurrence plots are examined and described. New developments have led to extensions that can be used to describe the recurring patterns in both space and time. Other important developments include recurrence plot-based approaches to identify abrupt changes in the system's dynamics, to detect and investigate external influences on the dynamics of a system, the couplings between different systems, as well as a combination of recurrence plots with the methodology of complex networks. Typical problems in geoscientific data analysis, such as irregular sampling and uncertainties, are tackled by specific modifications and additions. The development of a significance test allows the statistical evaluation of quantitative recurrence analysis, especially for the identification of dynamical transitions. Finally, an overview of typical pitfalls that can occur when applying recurrence-based methods is given and guidelines on how to avoid such pitfalls are discussed. In addition to the methodological aspects, the application potential especially for geoscientific research questions is discussed, such as the identification and analysis of transitions in past climates, the study of the influence of external factors to ecological or climatic systems, or the analysis of landuse dynamics based on remote sensing data.
In the scenario of the narrow escape problem (NEP) a particle diffuses in a finite container and eventually leaves it through a small 'escape window' in the otherwise impermeable boundary, once it arrives to this window and crosses an entropic barrier at the entrance to it. This generic problem is mathematically identical to that of a diffusion-mediated reaction with a partially-reactive site on the container's boundary. Considerable knowledge is available on the dependence of the mean first-reaction time (FRT) on the pertinent parameters. We here go a distinct step further and derive the full FRT distribution for the NEP. We demonstrate that typical FRTs may be orders of magnitude shorter than the mean one, thus resulting in a strong defocusing of characteristic temporal scales. We unveil the geometry-control of the typical times, emphasising the role of the initial distance to the target as a decisive parameter. A crucial finding is the further FRT defocusing due to the barrier, necessitating repeated escape or reaction attempts interspersed with bulk excursions. These results add new perspectives and offer a broad comprehension of various features of the by-now classical NEP that are relevant for numerous biological and technological systems.
Ultrafast magnetisation dynamics have been investigated intensely for two decades. The recovery process after demagnetisation, however, was rarely studied experimentally and discussed in detail. The focus of this work lies on the investigation of the magnetisation on long timescales after laser excitation. It combines two ultrafast time resolved methods to study the relaxation of the magnetic and lattice system after excitation with a high fluence ultrashort laser pulse. The magnetic system is investigated by time resolved measurements of the magneto-optical Kerr effect. The experimental setup has been implemented in the scope of this work. The lattice dynamics were obtained with ultrafast X-ray diffraction. The combination of both techniques leads to a better understanding of the mechanisms involved in magnetisation recovery from a non-equilibrium condition. Three different groups of samples are investigated in this work: Thin Nickel layers capped with nonmagnetic materials, a continuous sample of the ordered L10 phase of Iron Platinum and a sample consisting of Iron Platinum nanoparticles embedded in a carbon matrix. The study of the remagnetisation reveals a general trend for all of the samples: The remagnetisation process can be described by two time dependences. A first exponential recovery that slows down with an increasing amount of energy absorbed in the system until an approximately linear time dependence is observed. This is followed by a second exponential recovery. In case of low fluence excitation, the first recovery is faster than the second. With increasing fluence the first recovery is slowed down and can be described as a linear function. If the pump-induced temperature increase in the sample is sufficiently high, a phase transition to a paramagnetic state is observed. In the remagnetisation process, the transition into the ferromagnetic state is characterised by a distinct transition between the linear and exponential recovery. From the combination of the transient lattice temperature Tp(t) obtained from ultrafast X-ray measurements and magnetisation M(t) gained from magneto-optical measurements we construct the transient magnetisation versus temperature relations M(Tp). If the lattice temperature remains below the Curie temperature the remagnetisation curve M(Tp) is linear and stays below the M(T) curve in equilibrium in the continuous transition metal layers. When the sample is heated above phase transition, the remagnetisation converges towards the static temperature dependence. For the granular Iron Platinum sample the M(Tp) curves for different fluences coincide, i.e. the remagnetisation follows a similar path irrespective of the initial laser-induced temperature jump.