Institut für Physik
Refine
Has Fulltext
- no (70)
Year of publication
Document Type
- Article (67)
- Monograph/Edited Volume (3)
Language
- English (70)
Is part of the Bibliography
- yes (70)
Institute
The emission dynamics of a mode-locked laser oscillator with a nonlinear mirror based on stimulated Brillouin scattering (SBS) has been investigated with regard to its spectrum and to its intensity distribution. The investigation was carried out experimentally as well as by numerical simulations. The laser yields trains of pulses with measured durations of 410 ps and energies of the single pulse of up to 2 mJ. Two theoretical models describing the complex emission dynamics of a mode-locked SBS-laser oscillator are introduced. The first model consists of spectrally resolved laser rate equations and thus describes the mode locking in the frequency domain by the superposition of the longitudinal resonator modes. The SBS-Q-switch is incorporated by a phenomenological description of the time dependent SBS reflectivity. Numerical simulations based on this model yield the evolution of a few 100 longitudinal laser modes and the corresponding intensity distribution during the course of a Q-switch pulse with 10-ps resolution. The influences of the different components on the spectrum and thus on the pulse duration will be discussed. The second model describes all occurring dynamics in the time domain providing easy access to the study of misalignment on the output dynamics. Results of numerical simulations of both models and measurement results are compared
SBS-Phase Conjugation for Thermal Lens Compensation in 100 Watt Average Power Solid-State Lasers
(1994)
Broadband operation of a gain-switched Ti:sapphire laser for measurements with the coherence radar
(1999)
Q switch and longitudinal modes of a laser oscillator with a stimulated-Brillouin-scattering mirror
(1999)
Compact white-light source with an average output power of 2.4 W and 900 nm spectral bandwidth
(2003)
Cross-sections for ground and excited state absorptions of the charge transfer system 3-(3-tert- butoxycarbonylamino-propyl)-4'-pyren-1-yl-biphenyl-2,5-dicarbo xylicacid dimethyl ester (Py-C) are determined from nonlinear absorption and fluorescence measurements as a function of solvent. While in non-polar solvents no stable charge transfer (CT) state occurs after optical excitation, in polar solvents the CT state is stabilized. (C) 2004 Elsevier B.V. All rights reserved
We show a Lefschetz fixed point formula for holomorphic functions in a bounded domain D with smooth boundary in the complex plane. To introduce the Lefschetz number for a holomorphic map of D, we make use of the Bergman kernel of this domain. The Lefschetz number is proved to be the sum of the usual contributions of fixed points of the map in D and contributions of boundary fixed points, these latter being different for attracting and repulsing fixed points
Advances in broad bandwidth light sources for ultrahigh resolution optical coherence tomography
(2004)
Novel ultra-broad bandwidth light sources enabling unprecedented sub-2 pm axial resolution over the 400 nm-1700 nm wavelength range have been developed and evaluated with respect to their feasibility for clinical ultrahigh resolution optical coherence tomography (UHR OCT) applications. The state-of-the-art light sources described here include a compact Kerr lens mode locked Ti:sapphire laser (lambda(c) = 785 nm, Deltalambda = 260 nm, P-out = 50 mW) and different nonlinear fibre-based light sources with spectral bandwidths (at full width at half maximum) up to 350 nm at lambda(c) = 1130 nm and 470 nm at lambda(c) = 1375 run. In vitro UHR OCT imaging is demonstrated at multiple wavelengths in human cancer cells, animal ganglion cells as well as in neuropathologic and ophthalmic biopsies in order to compare and optimize UHR OCT image contrast, resolution and penetration depth
Metrological Applications
(2004)
A passively Q-switched laser with a nonlinear mirror on the basis of stimulated Brillouin scattering (SBS), generates bursts of pulses with a few 10 ns pulse duration and a separation between 20-90 mu s. Percussion drilling and trepanning are performed in different materials with 1 mm thickness. The optimum parameter set of these pulse trains with regard to the burr height and ablation rate is investigated. Differences in the processing results between single pulse and multi pulse structures are discussed. In addition the laser allowed for transiently mode locked operation. Results for mode locked and merely Q-switched operation were compared
A pulsed, diode-laser-pumped Nd:YAG master oscillator power amplifier (MOPA) in rod geometry, frequency stabilized with a modified Pound-Drever-Hall scheme is presented. The apparatus delivers 33-ns pulses with a maximum pulse energy of 0.5 J at 1064 nm. The system was set up in two different configurations for repetition rates of 100 or 250 Hz. The beam quality was measured to be 1.5 times the diffraction limit at a pulse energy of 405 mJ and a repetition rate of 100 Hz. At 250 Hz with the same pulse energy, the M-2 was better than 2.1. The radiation is frequency converted with an efficiency of 50% to 532 nm. This MOPA system will be the pump laser of transmitters for a variety of high-end, scanning lidar systems. (C) 2005 Optical Society of America
We present a flashlamp-pumped Nd: YAG laser simultaneously emitting pulse structures on microsecond, nanosecond and picosecond time scales. Within a microsecond flashlamp pump pulse a nonlinear reflector based on stimulated Brillouin scattering (SBS) generates several Q-switch pulses. The phase-conjugating effect of the SBS reflector provides a compensation of phase distortions generated inside the laser rod, resulting in transverse fundamental mode operation. Additional acousto-optic loss modulation inside the resonator leads to mode locking. As a result, each Q-switch pulse is subdivided into several picosecond pulses. Energies of up to 2 mJ for the mode-locked pulses with durations between 220 and 800 ps are demonstrated. The wide variability of the laser's temporal output parameters as well as its high beam quality make it a splendid tool for fundamental research in laser materials processing
High cw power using an external cavity for spectral beam combining of diode laser-bar emission
(2006)
In extension to known concepts of wavelength-multiplexing diode laser arrays, a new external cavity is presented. The setup simultaneously improves the beam quality of each single emitter of a standard 25 emitter broad-area stripe laser bar and spectrally superimposes the 25 beams into one. By using this external resonator in an "off-axis" arrangement, beam qualities of M-slow(2) < 14 and M-fast(2) < 3 with optical powers in excess of 10 W in cw operation are obtained.