Extern
Refine
Year of publication
Document Type
- Article (705)
- Postprint (204)
- Review (140)
- Conference Proceeding (137)
- Doctoral Thesis (132)
- Monograph/Edited Volume (87)
- Working Paper (44)
- Part of Periodical (19)
- Part of a Book (16)
- Preprint (7)
Language
- German (858)
- English (623)
- Russian (14)
- French (13)
- Portuguese (1)
Keywords
- Philosophie (18)
- philosophy (18)
- Lehrkräftebildung (16)
- Reflexion (13)
- Germany (9)
- Reflexionskompetenz (9)
- United States (8)
- Anthropologie (7)
- Feedback (7)
- USA (7)
Institute
- Extern (1509) (remove)
Die Begrenzung systemischer Risiken ist essentieller Bestandteil der neuen internationalen Finanzmarktordnung. Dabei galt es nicht nur die Verflechtung der Banken untereinander, sondern auch die Verbindung zwischen den Staatsfinanzen und der Solvenz der nationalen Bankensysteme (dem sog. Risikoverbund zwischen Staat und Banken) zu durchbrechen. Der Beitrag beleuchtet die Entwicklung der Forderungen gegenüber Staaten in den Bankbilanzen der Euroländer und des Eurosystems im Zeitverlauf sowie den daraus erwachsenden Risiken für die Finanzstabilität. Hierzu werden die Determinanten des Risikoverbunds theoretisch wie empirisch analysiert. Die fiskalische Kapazität der Eurostaaten wird anhand verschiedener Faktoren wie der Verschuldungsquote, dem Leistungsbilanzsaldo und der Kredit-BIP Lücke aufgezeigt; anschließend werden die Strukturen der Bankensysteme im Euroraum untersucht. Im Einzelnen werden die private und staatliche Gesamtverschuldung, die konsolidierte Bankenbilanzsumme und die darin enthaltenen Verbindlichkeiten sowie der Anteil des Bankensektors an der Bruttowertschöpfung in Relation zur Wirtschaftsleistung betrachtet. Außerdem finden NPE-Bestände in den Bankbilanzen sowie die Renditen der emittierten Staatsanleihen und damit in Verbindung stehenden CDS-Spreads Betrachtung. Zusätzlich werden die Konzentration, der Verschuldungsgrad, Liquiditätsziffern sowie länderspezifische Unterschiede in Art und Fristigkeit der Refinanzierung der Bankensektoren abgebildet. Auf Basis der empirischen Befunde werden im Hinblick auf die wechselseitigen Ansteckungseffekte zwischen Banken und Staaten Implikationen für die Finanzmarktregulierung diskutiert.
Leadership plays an important role for the efficient and fair solution of social dilemmas but the effectiveness of a leader can vary substantially. Two main factors of leadership impact are the ability to induce high contributions by all group members and the (expected) fair use of power. Participants in our experiment decide about contributions to a public good. After all contributions are made, the leader can choose how much of the joint earnings to assign to herself; the remainder is distributed equally among the followers. Using machine learning techniques, we study whether the content of initial open statements by the group members predicts their behavior as a leader and whether groups are able to identify such clues and endogenously appoint a “good” leader to solve the dilemma. We find that leaders who promise fairness are more likely to behave fairly, and that followers appoint as leaders those who write more explicitly about fairness and efficiency. However, in their contribution decision, followers focus on the leader’s first-move contribution and place less importance on the content of the leader’s statements.
Access to digital finance
(2024)
Financing entrepreneurship spurs innovation and economic growth. Digital financial platforms that crowdfund equity for entrepreneurs have emerged globally, yet they remain poorly understood. We model equity crowdfunding in terms of the relationship between the number of investors and the amount of money raised per pitch. We examine heterogeneity in the average amount raised per pitch that is associated with differences across three countries and seven platforms. Using a novel dataset of successful fundraising on the most prominent platforms in the UK, Germany, and the USA, we find the underlying relationship between the number of investors and the amount of money raised for entrepreneurs is loglinear, with a coefficient less than one and concave to the origin. We identify significant variation in the average amount invested in each pitch across countries and platforms. Our findings have implications for market actors as well as regulators who set competitive frameworks.
The icosahedral non-hydrostatic large eddy model (ICON-LEM) was applied around the drift track of the Multidisciplinary Observatory Study of the Arctic (MOSAiC) in 2019 and 2020. The model was set up with horizontal grid-scales between 100m and 800m on areas with radii of 17.5km and 140 km. At its lateral boundaries, the model was driven by analysis data from the German Weather Service (DWD), downscaled by ICON in limited area mode (ICON-LAM) with horizontal grid-scale of 3 km.
The aim of this thesis was the investigation of the atmospheric boundary layer near the surface in the central Arctic during polar winter with a high-resolution mesoscale model. The default settings in ICON-LEM prevent the model from representing the exchange processes in the Arctic boundary layer in accordance to the MOSAiC observations. The implemented sea-ice scheme in ICON does not include a snow layer on sea-ice, which causes a too slow response of the sea-ice surface temperature to atmospheric changes. To allow the sea-ice surface to respond faster to changes in the atmosphere, the implemented sea-ice parameterization in ICON was extended with an adapted heat capacity term.
The adapted sea-ice parameterization resulted in better agreement with the MOSAiC observations. However, the sea-ice surface temperature in the model is generally lower than observed due to biases in the downwelling long-wave radiation and the lack of complex surface structures, like leads. The large eddy resolving turbulence closure yielded a better representation of the lower boundary layer under strongly stable stratification than the non-eddy-resolving turbulence closure. Furthermore, the integration of leads into the sea-ice surface reduced the overestimation of the sensible heat flux for different weather conditions.
The results of this work help to better understand boundary layer processes in the central Arctic during the polar night. High-resolving mesoscale simulations are able to represent temporally and spatially small interactions and help to further develop parameterizations also for the application in regional and global models.
With Arctic ground as a huge and temperature-sensitive carbon reservoir, maintaining low ground temperatures and frozen conditions to prevent further carbon emissions that contrib-ute to global climate warming is a key element in humankind’s fight to maintain habitable con-ditions on earth. Former studies showed that during the late Pleistocene, Arctic ground condi-tions were generally colder and more stable as the result of an ecosystem dominated by large herbivorous mammals and vast extents of graminoid vegetation – the mammoth steppe. Characterised by high plant productivity (grassland) and low ground insulation due to animal-caused compression and removal of snow, this ecosystem enabled deep permafrost aggrad-ation. Now, with tundra and shrub vegetation common in the terrestrial Arctic, these effects are not in place anymore. However, it appears to be possible to recreate this ecosystem local-ly by artificially increasing animal numbers, and hence keep Arctic ground cold to reduce or-ganic matter decomposition and carbon release into the atmosphere.
By measuring thaw depth, total organic carbon and total nitrogen content, stable carbon iso-tope ratio, radiocarbon age, n-alkane and alcohol characteristics and assessing dominant vegetation types along grazing intensity transects in two contrasting Arctic areas, it was found that recreating conditions locally, similar to the mammoth steppe, seems to be possible. For permafrost-affected soil, it was shown that intensive grazing in direct comparison to non-grazed areas reduces active layer depth and leads to higher TOC contents in the active layer soil. For soil only frozen on top in winter, an increase of TOC with grazing intensity could not be found, most likely because of confounding factors such as vertical water and carbon movement, which is not possible with an impermeable layer in permafrost. In both areas, high animal activity led to a vegetation transformation towards species-poor graminoid-dominated landscapes with less shrubs. Lipid biomarker analysis revealed that, even though the available organic material is different between the study areas, in both permafrost-affected and sea-sonally frozen soils the organic material in sites affected by high animal activity was less de-composed than under less intensive grazing pressure. In conclusion, high animal activity af-fects decomposition processes in Arctic soils and the ground thermal regime, visible from reduced active layer depth in permafrost areas. Therefore, grazing management might be utilised to locally stabilise permafrost and reduce Arctic carbon emissions in the future, but is likely not scalable to the entire permafrost region.
Das Forschungsprojekt „Workflow-Management-Systeme für Open-Access-Hochschulverlage (OA-WFMS)” ist eine Kooperation zwischen der HTWK Leipzig und der Universität Potsdam. Ziel ist es, die Bedarfe von Universitäts- und Hochschulverlagen und Anforderungen an ein Workflow-Management-Systeme (WFMS) zu analysieren, um daraus ein generisches Lastenheft zu erstellen. Das WFMS soll den Publikationsprozess in OA-Verlagen erleichtern, beschleunigen sowie die Verbreitung von Open Access und das nachhaltige, digitale wissenschaftliche Publizieren fördern.
Das Projekt baut auf den Ergebnissen der Projekte „Open-Access-Hochschulverlag (OA-HVerlag)“ und „Open-Access-Strukturierte-Kommunikation (OA-STRUKTKOMM)“ auf. Der diesem Bericht zugrunde liegende Auftaktworkshop fand 2024 in Leipzig mit Vertreter:innen von zehn Institutionen statt. Der Workshop diente dazu, Herausforderungen und Anforderungen an ein WFMS zu ermitteln sowie bestehende Lösungsansätze und Tools zu diskutieren.
Im Workshop wurden folgende Fragen behandelt:
a. Wie kann die Organisation und Überwachung von Publikationsprozessen in wissenschaftlichen Verlagen durch ein WFMS effizient gestaltet werden?
b. Welche Anforderungen muss ein WFMS erfüllen, um Publikationsprozesse optimal zu unterstützen?
c. Welche Schnittstellen müssen berücksichtigt werden, um die Interoperabilität der Systeme zu garantieren?
d. Welche bestehenden Lösungsansätze und Tools sind bereits im Einsatz und welche Vor- und Nachteile haben diese?
Der Workshop gliederte sich in zwei Teile : Teil 1 behandelte Herausforderungen und Anforderungen (Fragen a. bis c.), Teil 2 bestehende Lösungen und Tools (Frage d.). Die Ergebnisse des Workshops fließen in die Bedarfsanalyse des Forschungsprojekts ein.
Die im Bericht dokumentierten Ergebnisse zeigen die Vielzahl der Herausforderungen der bestehenden Ansätze bezüglich des OA-Publikationsmanagements . Die Herausforderungen zeigen sich insbesondere bei der Systemheterogenität, den individuellen Anpassungsbedarfen und der Notwendigkeit der systematischen Dokumentation. Die eingesetzten Unterstützungssysteme und Tools wie Dateiablagen, Projektmanagement- und Kommunikationstools können insgesamt den Anforderungen nicht genügen, für Teillösungen sind sie jedoch nutzbar. Deshalb muss die Integration bestehender Systeme in ein zu entwickelndes OA-WFMS in Betracht gezogen und die Interoperabilität der miteinander interagierenden Systeme gewährleistet werden. Die Beteiligten des Workshops waren sich einig, dass das OA-WFMS flexibel und modular aufgebaut werden soll. Einer konsortialen Softwareentwicklung und einem gemeinsamen Betrieb im Verbund wurde der Vorrang gegeben.
Der Workshop lieferte wertvolle Einblicke in die Arbeit der Hochschulverlage und bildet somit eine solide Grundlage für die in Folge zu erarbeitende weitere Bedarfsanalyse und die Erstellung des generischen Lastenheftes.
We study the effect of energy and transport policies on pollution in two developing country cities. We use a quantitative equilibrium model with choice of housing, energy use, residential location, transport mode, and energy technology. Pollution comes from commuting and residential energy use. The model parameters are calibrated to replicate key variables for two developing country cities, Maputo, Mozambique, and Yogyakarta, Indonesia. In the counterfactual simulations, we study how various transport and energy policies affect equilibrium pollution. Policies may be induce rebound effects from increasing residential energy use or switching to high emission modes or locations. In general, these rebound effects tend to be largest for subsidies to public transport or modern residential energy technology.
Aging is associated with bone loss, which can lead to osteoporosis and high fracture risk. This coincides with the enhanced formation of bone marrow adipose tissue (BMAT), suggesting a negative effect of bone marrow adipocytes on skeletal health. Increased BMAT formation is also observed in pathologies such as obesity, type 2 diabetes and osteoporosis. However, a subset of bone marrow adipocytes forming the constitutive BMAT (cBMAT), arise early in life in the distal skeleton, contain high levels of unsaturated fatty acids and are thought to provide a physiological function. Regulated BMAT (rBMAT) forms during aging and obesity in proximal regions of the bone and contain a large proportion of saturated fatty acids. Paradoxically, BMAT accumulation is also enhanced during caloric restriction (CR), a life-span extending dietary intervention. This indicates, that different types of BMAT can form in response to opposing nutritional stimuli with potentially different functions.
To this end, two types of nutritional interventions, CR and high fat diet (HFD), that are both described to induce BMAT accumulation were carried out. CR markedly increased BMAT formation in the proximal tibia and led to a higher proportion of unsaturated fatty acids, making it similar to the physiological cBMAT. Additionally, proximal and diaphyseal tibia regions displayed higher adiponectin expression. In aged mice, CR was associated with an improved trabecular bone structure. Taken together, these findings demonstrate, that the type of BMAT that forms during CR might provide beneficial effects for local bone stem/progenitor cells and metabolic health. The HFD intervention performed in this thesis showed no effect on BMAT accumulation and bone microstructure. RNA Seq analysis revealed alterations in the composition of the collagen-containing extracellular matrix (ECM).
In order to investigate the effects of glucose homeostasis on osteogenesis, differentiation capacity of immortalized multipotent mesenchymal stromal cells (MSCs) and osteochondrogenic progenitor cells (OPCs) was analyzed. Insulin improved differentiation in both cell types, however, combination of with a high glucose concentration led to an impaired mineralization of the ECM. In the MSCs, this was accompanied by the formation of adipocytes, indicating negative effects of the adipocytes formed during hyperglycemic conditions on mineralization processes. However, the altered mineralization pattern and structure of the ECM was also observed in OPCs, which did not form any adipocytes, suggesting further negative effects of a hyperglycemic environment on osteogenic differentiation.
In summary, the work provided in this thesis demonstrated that differentiation commitment of bone-resident stem cells can be altered through nutrient availability, specifically glucose. Surprisingly, both high nutrient supply, e.g. the hyperglycemic cell culture conditions, and low nutrient supply, e.g. CR, can induce adipogenic differentiation. However, while CR-induced adipocyte formation was associated with improved trabecular bone structure, adipocyte formation in a hyperglycemic cell-culture environment hampered mineralization. This thesis provides further evidence for the existence of different types of BMAT with specific functions.
The Arctic is the hot spot of the ongoing, global climate change. Over the last decades, near-surface temperatures in the Arctic have been rising almost four times faster than on global average. This amplified warming of the Arctic and the associated rapid changes of its environment are largely influenced by interactions between individual components of the Arctic climate system. On daily to weekly time scales, storms can have major impacts on the Arctic sea-ice cover and are thus an important part of these interactions within the Arctic climate. The sea-ice impacts of storms are related to high wind speeds, which enhance the drift and deformation of sea ice, as well as to changes in the surface energy budget in association with air mass advection, which impact the seasonal sea-ice growth and melt.
The occurrence of storms in the Arctic is typically associated with the passage of transient cyclones. Even though the above described mechanisms how storms/cyclones impact the Arctic sea ice are in principal known, there is a lack of statistical quantification of these effects. In accordance with that, the overarching objective of this thesis is to statistically quantify cyclone impacts on sea-ice concentration (SIC) in the Atlantic Arctic Ocean over the last four decades. In order to further advance the understanding of the related mechanisms, an additional objective is to separate dynamic and thermodynamic cyclone impacts on sea ice and assess their relative importance. Finally, this thesis aims to quantify recent changes in cyclone impacts on SIC. These research objectives are tackled utilizing various data sets, including atmospheric and oceanic reanalysis data as well as a coupled model simulation and a cyclone tracking algorithm.
Results from this thesis demonstrate that cyclones are significantly impacting SIC in the Atlantic Arctic Ocean from autumn to spring, while there are mostly no significant impacts in summer. The strength and the sign (SIC decreasing or SIC increasing) of the cyclone impacts strongly depends on the considered daily time scale and the region of the Atlantic Arctic Ocean. Specifically, an initial decrease in SIC (day -3 to day 0 relative to the cyclone) is found in the Greenland, Barents and Kara Seas, while SIC increases following cyclones (day 0 to day 5 relative to the cyclone) are mostly limited to the Barents and Kara Seas.
For the cold season, this results in a pronounced regional difference between overall (day -3 to day 5 relative to the cyclone) SIC-decreasing cyclone impacts in the Greenland Sea and overall SIC-increasing cyclone impacts in the Barents and Kara Seas. A cyclone case study based on a coupled model simulation indicates that both dynamic and thermodynamic mechanisms contribute to cyclone impacts on sea ice in winter. A typical pattern consisting of an initial dominance of dynamic sea-ice changes followed by enhanced thermodynamic ice growth after the cyclone passage was found. This enhanced ice growth after the cyclone passage most likely also explains the (statistical) overall SIC-increasing effects of cyclones in the Barents and Kara Seas in the cold season.
Significant changes in cyclone impacts on SIC over the last four decades have emerged throughout the year. These recent changes are strongly varying from region to region and month to month. The strongest trends in cyclone impacts on SIC are found in autumn in the Barents and Kara Seas. Here, the magnitude of destructive cyclone impacts on SIC has approximately doubled over the last four decades. The SIC-increasing effects following the cyclone passage have particularly weakened in the Barents Sea in autumn. As a consequence, previously existing overall SIC-increasing cyclone impacts in this region in autumn have recently disappeared. Generally, results from this thesis show that changes in the state of the sea-ice cover (decrease in mean sea-ice concentration and thickness) and near-surface air temperature are most important for changed cyclone impacts on SIC, while changes in cyclone properties (i.e. intensity) do not play a significant role.
We examine how the gender of business-owners is related to the wages paid to female relative to male employees working in their firms. Using Finnish register data and employing firm fixed effects, we find that the gender pay gap is – starting from a gender pay gap of 11 to 12 percent - two to three percentage-points lower for hourly wages in female-owned firms than in male-owned firms. Results are robust to how the wage is measured, as well as to various further robustness checks. More importantly, we find substantial differences between industries. While, for instance, in the manufacturing sector, the gender of the owner plays no role for the gender pay gap, in several service sector industries, like ICT or business services, no or a negligible gender pay gap can be found, but only when firms are led by female business owners. Businesses in male ownership maintain a gender pay gap of around 10 percent also in the latter industries. With increasing firm size, the influence of the gender of the owner, however, fades. In large firms, it seems that others – firm managers – determine wages and no differences in the pay gap are observed between male- and female-owned firms.
We analyze how conventional emissions trading schemes (ETS) can be modified by introducing “clean-up certificates” to allow for a phase of net-negative emissions. Clean-up certificates bundle the permission to emit CO2 with the obligation for its removal. We show that demand for such certificates is determined by cost-saving technological progress, the discount rate and the length of the compliance period. Introducing extra clean-up certificates into an existing ETS reduces near-term carbon prices and mitigation efforts. In contrast, substituting ETS allowances with clean-up certificates reduces cumulative emissions without depressing carbon prices or mitigation in the near term. We calibrate our model to the EU ETS and identify reforms where simultaneously (i) ambition levels rise, (ii) climate damages fall, (iii) revenues from carbon prices rise and (iv) carbon prices and aggregate mitigation cost fall. For reducing climate damages, roughly half of the issued clean-up certificates should replace conventional ETS allowances. In the context of the EU ETS, a European Carbon Central Bank could manage the implementation of cleanup certificates and could serve as an enforcement mechanism.
Zum dreißigjährigen Bestehen des Kommunalwissenschaftlichen Instituts an der Universität Potsdam vereint dieser Jubiläumsband kurze Aufsätze von ehemaligen und aktuellen Vorstandsmitgliedern, von Ehrenmitgliedern des Vorstands, langjährigen wissenschaftlichen Mitarbeitern des Instituts und aktuellen wissenschaftlichen Kooperationspartnern. Die insgesamt zwölf Beiträge befassen sich mit den Kommunalwissenschaften und der Geschichte des Kommunalwissenschaftlichen Instituts, mit aktuellen kommunalwissenschaftlichen Fragestellungen und wissenschaftlichen Kooperationen des KWI. Der vom KWI-Vorstand herausgegebene Band soll einen breiten Blick auf 30 Jahre Kommunalwissenschaften in Brandenburg und an der Universität Potsdam werfen und einen Ausblick auf zukünftige kommunalwissenschaftliche Forschung geben.
The increasing number of known exoplanets raises questions about their demographics and the mechanisms that shape planets into how we observe them today. Young planets in close-in orbits are exposed to harsh environments due to the host star being magnetically highly active, which results in high X-ray and extreme UV fluxes impinging on the planet. Prolonged exposure to this intense photoionizing radiation can cause planetary atmospheres to heat up, expand and escape into space via a hydrodynamic escape process known as photoevaporation. For super-Earth and sub-Neptune-type planets, this can even lead to the complete erosion of their primordial gaseous atmospheres. A factor of interest for this particular mass-loss process is the activity evolution of the host star. Stellar rotation, which drives the dynamo and with it the magnetic activity of a star, changes significantly over the stellar lifetime. This strongly affects the amount of high-energy radiation received by a planet as stars age. At a young age, planets still host warm and extended envelopes, making them particularly susceptible to atmospheric evaporation. Especially in the first gigayear, when X-ray and UV levels can be 100 - 10,000 times higher than for the present-day sun, the characteristics of the host star and the detailed evolution of its high-energy emission are of importance.
In this thesis, I study the impact of stellar activity evolution on the high-energy-induced atmospheric mass loss of young exoplanets. The PLATYPOS code was developed as part of this thesis to calculate photoevaporative mass-loss rates over time. The code, which couples parameterized planetary mass-radius relations with an analytical hydrodynamic escape model, was used, together with Chandra and eROSITA X-ray observations, to investigate the future mass loss of the two young multiplanet systems V1298 Tau and K2-198. Further, in a numerical ensemble study, the effect of a realistic spread of activity tracks on the small-planet radius gap was investigated for the first time. The works in this thesis show that for individual systems, in particular if planetary masses are unconstrained, the difference between a young host star following a low-activity track vs. a high-activity one can have major implications: the exact shape of the activity evolution can determine whether a planet can hold on to some of its atmosphere, or completely loses its envelope, leaving only the bare rocky core behind. For an ensemble of simulated planets, an observationally-motivated distribution of activity tracks does not substantially change the final radius distribution at ages of several gigayears. My simulations indicate that the overall shape and slope of the resulting small-planet radius gap is not significantly affected by the spread in stellar activity tracks. However, it can account for a certain scattering or fuzziness observed in and around the radius gap of the observed exoplanet population.
In this essay I argue that while research in Jewish studies over the last several decades has done much to erode the historical narrative of Jewish/non-Jewish separation and detachment, it has also raised various questions pertaining to the outcome of Jewish/non-Jewish interactions and coexistence as well as the contours of Jewish difference. I contend that employing the concepts of conviviality, ethnic/religious/national indifference, and similarity will greatly facilitate answering these questions.
Habsburg Central Europe
(2024)
Central Europe is characterized by linguistic and cultural density as well as by endogenous and exogenous cultural influences. These constellations were especially visible in the former Habsburg Empire, where they influenced the formation of individual and collective identities. This led not only to continual crises and conflicts, but also to an equally enormous creative potential as became apparent in the culture of the fin-de-siècle.
This article brings two seemingly disconnected historiographic models of periodization into conversation: Habsburg studies and Habsburg Jewish studies. It argues for an expansion of the temporal frameworks of both fields to highlight historical continuities connecting the Holy Roman and Habsburg Empire at least from a structural perspective. These historical continuums are a useful analytical lens when applied to marginalized groups, like early modern Jews, in tandem with a central group of contemporary powerholders, such as the Habsburg nobility. Using Bohemia as a case study, this essay juxtaposes questions of transregional transfer of cultural, economic, and social capital with the challenges of Jewish marginalization and discrimination to highlight the changing yet interconnected imperial landscapes.
This article aims to demonstrate the exceptional potential of Habsburg military records for the study of Jewish history during Europe’s Age of Revolution. We begin with the random discovery of six Jewish veterans of Freikorps Grün Loudon – a unit of mercenary freebooters – which fought for the Habsburgs during the first war against the French Republic (1792 – 97). A careful re-reading of the available archival evidence reveals that these men were the survivors of a much larger group numbering at least two dozen Jewish soldiers. While Jewish conscripts had been drafted into the Habsburg army since 1788, the fact that Jews could also serve – even volunteer – as professional soldiers in that period is completely new to us. When considered together, the personal circumstances and service experiences of the Jewish soldiers of Freikorps Grün Loudon enable us to make several observations about their motivation as well as their position vis-à-vis their non-Jewish comrades.
The article analyzes the interdependences between the history of the Habsburg Empire and the names of its Jewish inhabitants. Until today, these names tell stories about this close relationship and they are an everlasting symbol of this era. By focusing on names, this paper shows how state policies towards Jews shifted over time, and how the perspective on names and name regulations can be a tool to connect and investigate both Habsburg and Jewish studies.
“Domestic Foreigners”
(2024)
This paper examines the relationship between the Sephardic Jewish community of Vienna and the Ottoman and Habsburg Empires in the latter half of the 19th century. The community’s legal status was transformed following the emancipation of Austrian Jews, but very few first-hand accounts of these changes exist today. The primary sources analyzed in this paper are Judezmo-language newspapers published in Vienna at that time. The paper emphasizes the historical and political contexts surrounding these sources, particularly the community’s close ties to the Ottoman and Habsburg regimes.
Even though Salonican Jews are not typically associated with the Habsburg Empire, some of them, nonetheless, lived there. This paper aims to examine the formation of these Salonican Jews’ (self-)identification by studying their social interactions with the local Viennese population such as the Viennese Sephardi or the Greek-Orthodox communities. The change of the milieu within which they found themselves subsequently impacted their self-perception. Thus, the issue of the surrounding environment and their relations with other groups became central to their self-understanding, as will be demonstrated. By examining different aspects, like migration patterns, financial decisions and family ties, one can understand how their intersection influenced Salonica Jews’ self-identification, which, at the same time, shaped and was shaped by the surrounding milieu. Within this framework, these people perceived themselves and were perceived as Salonican, Sephardi, Jewish, and as subjects of the Emperor.
Shared Spaces
(2024)
Galicia was home to the largest Jewish population of the Cisleithanian part of the Habsburg Empire. After the Josephinian “German-Jewish schools” had closed already in 1806, educational patterns differed from those in Moravia and Bohemia, where Jewish children received a secular education in a more consistent “Jewish” space. In Galicia in the constitutional era (post-1867), however, with mandatory education enforced, public schools became a shared space in which Jews and (Catholic) Christians functioned together. In Galicia, most Jewish children received public education but usually constituted a religious minority in the student body. The article analyzes how the school space, calendar, and routines were adjusted to accommodate the multi-religious character of the student body.
Jews and Muslims have lived in the territory of modern-day Austria for centuries untold, yet often continue to be construed as the essential “other.” This essay explores a selection of sometimes divergent, sometimes convergent historical experiences amongst these two broad population groups, focusing specifically on demographic diversity, community-building, discrimination and persecution, and the post-war situation. The ultimate aim is to illuminate paradigmatically through the Austrian case study the complex multicultural mosaic of historical Central Europe, the understanding of which, so our contention, sheds a critical light on the often divisive present-day debates concerning immigration and diversity in Austria and Central Europe more broadly. It furthermore opens up a hitherto understudied field of historical research, namely the entangled history of Jews and Muslims in modern Europe.
During the last decades, therapeutical proteins have risen to great significance in the pharmaceutical industry. As non-human proteins that are introduced into the human body cause a distinct immune system reaction that triggers their rapid clearance, most newly approved protein pharmaceuticals are shielded by modification with synthetic polymers to significantly improve their blood circulation time. All such clinically approved protein-polymer conjugates contain polyethylene glycol (PEG) and its conjugation is denoted as PEGylation. However, many patients develop anti-PEG antibodies which cause a rapid clearance of PEGylated molecules upon repeated administration. Therefore, the search for alternative polymers that can replace PEG in therapeutic applications has become important. In addition, although the blood circulation time is significantly prolonged, the therapeutic activity of some conjugates is decreased compared to the unmodified protein. The reason is that these conjugates are formed by the traditional conjugation method that addresses the protein's lysine side chains. As proteins have many solvent exposed lysines, this results in a somewhat uncontrolled attachment of polymer chains, leading to a mixture of regioisomers, with some of them eventually affecting the therapeutic performance.
This thesis investigates a novel method for ligating macromolecules in a site-specific manner, using enzymatic catalysis. Sortase A is used as the enzyme: It is a well-studied transpeptidase which is able to catalyze the intermolecular ligation of two peptides. This process is commonly referred to as sortase-mediated ligation (SML). SML constitutes an equilibrium reaction, which limits product yield. Two previously reported methods to overcome this major limitation were tested with polymers without using an excessive amount of one reactant.
Specific C- or N-terminal peptide sequences (recognition sequence and nucleophile) as part of the protein are required for SML. The complementary peptide was located at the polymer chain end. Grafting-to was used to avoid damaging the protein during polymerization. To be able to investigate all possible combinations (protein-recognition sequence and nucleophile-protein as well as polymer-recognition sequence and nucleophile-polymer) all necessary building blocks were synthesized. Polymerization via reversible deactivation radical polymerization (RDRP) was used to achieve a narrow molecular weight distribution of the polymers, which is required for therapeutic use.
The synthesis of the polymeric building blocks was started by synthesizing the peptide via automated solid-phase peptide synthesis (SPPS) to avoid post-polymerization attachment and to enable easy adaptation of changes in the peptide sequence. To account for the different functionalities (free N- or C-terminus) required for SML, different linker molecules between resin and peptide were used.
To facilitate purification, the chain transfer agent (CTA) for reversible addition-fragmentation chain-transfer (RAFT) polymerization was coupled to the resin-immobilized recognition sequence peptide. The acrylamide and acrylate-based monomers used in this thesis were chosen for their potential to replace PEG.
Following that, surface-initiated (SI) ATRP and RAFT polymerization were attempted, but failed. As a result, the newly developed method of xanthate-supported photo-iniferter (XPI) RAFT polymerization in solution was used successfully to obtain a library of various peptide-polymer conjugates with different chain lengths and narrow molar mass distributions.
After peptide side chain deprotection, these constructs were used first to ligate two polymers via SML, which was successful but revealed a limit in polymer chain length (max. 100 repeat units). When utilizing equimolar amounts of reactants, the use of Ni2+ ions in combination with a histidine after the recognition sequence to remove the cleaved peptide from the equilibrium maximized product formation with conversions of up to 70 %.
Finally, a model protein and a nanobody with promising properties for therapeutical use were biotechnologically modified to contain the peptide sequences required for SML. Using the model protein for C- or N-terminal SML with various polymers did not result in protein-polymer conjugates. The reason is most likely the lack of accessibility of the protein termini to the enzyme. Using the nanobody for C-terminal SML, on the other hand, was successful. However, a similar polymer chain length limit was observed as in polymer-polymer SML. Furthermore, in case of the synthesis of protein-polymer conjugates, it was more effective to shift the SML equilibrium by using an excess of polymer than by employing the Ni2+ ion strategy.
Overall, the experimental data from this work provides a good foundation for future research in this promising field; however, more research is required to fully understand the potential and limitations of using SML for protein-polymer synthesis. In future, the method explored in this dissertation could prove to be a very versatile pathway to obtain therapeutic protein-polymer conjugates that exhibit high activities and long blood circulation times.
The Jewish museums established in the fin-de-siècle Habsburg Empire postulated the unity of “the Jewish people,” with custodians constructing an “us” (Jews) in distinction to the “other” (non-Jews). In the difference-oriented frenzy of the time, Jewish identity was predominantly presented as Central European, enlightened, not overly religious, and middle-class. Then, when the Viennese Jewish Museum opened its doors in 1895, the painters Isidor Kaufmann and David Kohn created an installation called “Die Gute Stube” (The Parlor). This exhibit housed books, furniture, as well as decorative and ritual objects of the kind that were thought to be found in typical Eastern European Jewish households. However, as this article argues, this attempted visualization of the essence of Judaism and the range of Jewish life worlds promoted a paradigmatic stereotype with which Jewish museums would have to struggle for decades to come.
Large parts of the Earth’s interior are inaccessible to direct observation, yet global geodynamic processes are governed by the physical material properties under extreme pressure and temperature conditions. It is therefore essential to investigate the deep Earth’s physical properties through in-situ laboratory experiments. With this goal in mind, the optical properties of mantle minerals at high pressure offer a unique way to determine a variety of physical properties, in a straight-forward, reproducible, and time-effective manner, thus providing valuable insights into the physical processes of the deep Earth. This thesis focusses on the system Mg-Fe-O, specifically on the optical properties of periclase (MgO) and its iron-bearing variant ferropericlase ((Mg,Fe)O), forming a major planetary building block. The primary objective is to establish links between physical material properties and optical properties. In particular the spin transition in ferropericlase, the second-most abundant phase of the lower mantle, is known to change the physical material properties. Although the spin transition region likely extends down to the core-mantle boundary, the ef-fects of the mixed-spin state, where both high- and low-spin state are present, remains poorly constrained.
In the studies presented herein, we show how optical properties are linked to physical properties such as electrical conductivity, radiative thermal conductivity and viscosity. We also show how the optical properties reveal changes in the chemical bonding. Furthermore, we unveil how the chemical bonding, the optical and other physical properties are affected by the iron spin transition. We find opposing trends in the pres-sure dependence of the refractive index of MgO and (Mg,Fe)O. From 1 atm to ~140 GPa, the refractive index of MgO decreases by ~2.4% from 1.737 to 1.696 (±0.017). In contrast, the refractive index of (Mg0.87Fe0.13)O (Fp13) and (Mg0.76Fe0.24)O (Fp24) ferropericlase increases with pressure, likely because Fe Fe interactions between adjacent iron sites hinder a strong decrease of polarizability, as it is observed with increasing density in the case of pure MgO. An analysis of the index dispersion in MgO (decreasing by ~23% from 1 atm to ~103 GPa) reflects a widening of the band gap from ~7.4 eV at 1 atm to ~8.5 (±0.6) eV at ~103 GPa. The index dispersion (between 550 and 870 nm) of Fp13 reveals a decrease by a factor of ~3 over the spin transition range (~44–100 GPa). We show that the electrical band gap of ferropericlase significantly widens up to ~4.7 eV in the mixed spin region, equivalent to an increase by a factor of ~1.7. We propose that this is due to a lower electron mobility between adjacent Fe2+ sites of opposite spin, explaining the previously observed low electrical conductivity in the mixed spin region. From the study of absorbance spectra in Fp13, we show an increasing covalency of the Fe-O bond with pressure for high-spin ferropericlase, whereas in the low-spin state a trend to a more ionic nature of the Fe-O bond is observed, indicating a bond weakening effect of the spin transition. We found that the spin transition is ultimately caused by both an increase of the ligand field-splitting energy and a decreasing spin-pairing energy of high-spin Fe2+.
Genome-scale metabolic models are mathematical representations of all known reactions occurring in a cell. Combined with constraints based on physiological measurements, these models have been used to accurately predict metabolic fluxes and effects of perturbations (e.g. knock-outs) and to inform metabolic engineering strategies. Recently, protein-constrained models have been shown to increase predictive potential (especially in overflow metabolism), while alleviating the need for measurement of nutrient uptake rates. The resulting modelling frameworks quantify the upkeep cost of a certain metabolic flux as the minimum amount of enzyme required for catalysis. These improvements are based on the use of in vitro turnover numbers or in vivo apparent catalytic rates of enzymes for model parameterization. In this thesis several tools for the estimation and refinement of these parameters based on in vivo proteomics data of Escherichia coli, Saccharomyces cerevisiae, and Chlamydomonas reinhardtii have been developed and applied. The difference between in vitro and in vivo catalytic rate measures for the three microorganisms was systematically analyzed. The results for the facultatively heterotrophic microalga C. reinhardtii considerably expanded the apparent catalytic rate estimates for photosynthetic organisms. Our general finding pointed at a global reduction of enzyme efficiency in heterotrophy compared to other growth scenarios. Independent of the modelled organism, in vivo estimates were shown to improve accuracy of predictions of protein abundances compared to in vitro values for turnover numbers. To further improve the protein abundance predictions, machine learning models were trained that integrate features derived from protein-constrained modelling and codon usage. Combining the two types of features outperformed single feature models and yielded good prediction results without relying on experimental transcriptomic data. The presented work reports valuable advances in the prediction of enzyme allocation in unseen scenarios using protein constrained metabolic models. It marks the first successful application of this modelling framework in the biotechnological important taxon of green microalgae, substantially increasing our knowledge of the enzyme catalytic landscape of phototrophic microorganisms.
Das Dokument "Forschungsdatenmanagement bei personenbezogenen Daten - eine Handreichung" versammelt zentrale Inhalte, Verweise und Vorgehensweisen für Forscher*innen, die in einer Studie personenbezogene Daten erheben und diese verarbeiten, archivieren oder veröffentlichen wollen. Die Handreichung verweist an den entsprechenden Abschnitten auf weiterführende Materialien wie insbesondere die Handreichung „Datenschutz“ des Rats für die Sozial-, Verhaltens-, Bildungs- und Wirtschaftswissenschaften (RatSWD).
Sulfur is an important element that is incorporated into many biomolecules in humans. The incorporation and transfer of sulfur into biomolecules is, however, facilitated by a series of different sulfurtransferases. Among these sulfurtransferases is the human mercaptopyruvate sulfurtransferase (MPST) also designated as tRNA thiouridine modification protein (TUM1). The role of the human TUM1 protein has been suggested in a wide range of physiological processes in the cell among which are but not limited to involvement in Molybdenum cofactor (Moco) biosynthesis, cytosolic tRNA thiolation and generation of H2S as signaling molecule both in mitochondria and the cytosol. Previous interaction studies showed that TUM1 interacts with the L-cysteine desulfurase NFS1 and the Molybdenum cofactor biosynthesis protein 3 (MOCS3). Here, we show the roles of TUM1 in human cells using CRISPR/Cas9 genetically modified Human Embryonic Kidney cells. Here, we show that TUM1 is involved in the sulfur transfer for Molybdenum cofactor synthesis and tRNA thiomodification by spectrophotometric measurement of the activity of sulfite oxidase and liquid chromatography quantification of the level of sulfur-modified tRNA. Further, we show that TUM1 has a role in hydrogen sulfide production and cellular bioenergetics.
In late summer, migratory bats of the temperate zone face the challenge of accomplishing two energy-demanding tasks almost at the same time: migration and mating. Both require information and involve search efforts, such as localizing prey or finding potential mates. In non-migrating bat species, playback studies showed that listening to vocalizations of other bats, both con-and heterospecifics, may help a recipient bat to find foraging patches and mating sites. However, we are still unaware of the degree to which migrating bats depend on con-or heterospecific vocalizations for identifying potential feeding or mating opportunities during nightly transit flights. Here, we investigated the vocal responses of Nathusius’ pipistrelle bats, Pipistrellus nathusii, to simulated feeding and courtship aggregations at a coastal migration corridor. We presented migrating bats either feeding buzzes or courtship calls of their own or a heterospecific migratory species, the common noctule, Nyctalus noctula. We expected that during migratory transit flights, simulated feeding opportunities would be particularly attractive to bats, as well as simulated mating opportunities which may indicate suitable roosts for a stopover. However, we found that when compared to the natural silence of both pre-and post-playback phases, bats called indifferently during the playback of conspecific feeding sounds, whereas P. nathusii echolocation call activity increased during simulated feeding of N. noctula. In contrast, the call activity of P. nathusii decreased during the playback of conspecific courtship calls, while no response could be detected when heterospecific call types were broadcasted. Our results suggest that while on migratory transits, P. nathusii circumnavigate conspecific mating aggregations, possibly to save time or to reduce the risks associated with social interactions where aggression due to territoriality might be expected. This avoidance behavior could be a result of optimization strategies by P. nathusii when performing long-distance migratory flights, and it could also explain the lack of a response to simulated conspecific feeding. However, the observed increase of activity in response to simulated feeding of N. noctula, suggests that P. nathusii individuals may be eavesdropping on other aerial hawking insectivorous species during migration, especially if these occupy a slightly different foraging niche.
The central gas in half of all galaxy clusters shows short cooling times. Assuming unimpeded cooling, this should lead to high star formation and mass cooling rates, which are not observed. Instead, it is believed that condensing gas is accreted by the central black hole that powers an active galactic nuclei jet, which heats the cluster. The detailed heating mechanism remains uncertain. A promising mechanism invokes cosmic ray protons that scatter on self-generated magnetic fluctuations, i.e. Alfvén waves. Continuous damping of Alfvén waves provides heat to the intracluster medium. Previous work has found steady state solutions for a large sample of clusters where cooling is balanced by Alfvénic wave heating. To verify modeling assumptions, we set out to study cosmic ray injection in three-dimensional magnetohydrodynamical simulations of jet feedback in an idealized cluster with the moving-mesh code arepo. We analyze the interaction of jet-inflated bubbles with the turbulent magnetized intracluster medium.
Furthermore, jet dynamics and heating are closely linked to the largely unconstrained jet composition. Interactions of electrons with photons of the cosmic microwave background result in observational signatures that depend on the bubble content. Those recent observations provided evidence for underdense bubbles with a relativistic filling while adopting simplifying modeling assumptions for the bubbles. By reproducing the observations with our simulations, we confirm the validity of their modeling assumptions and as such, confirm the important finding of low-(momentum) density jets.
In addition, the velocity and magnetic field structure of the intracluster medium have profound consequences for bubble evolution and heating processes. As velocity and magnetic fields are physically coupled, we demonstrate that numerical simulations can help link and thereby constrain their respective observables. Finally, we implement the currently preferred accretion model, cold accretion, into the moving-mesh code arepo and study feedback by light jets in a radiatively cooling magnetized cluster. While self-regulation is attained independently of accretion model, jet density and feedback efficiencies, we find that in order to reproduce observed cold gas morphology light jets are preferred.
The light reactions of photosynthesis are carried out by a series of multiprotein complexes embedded in thylakoid membranes. Among them, photosystem I (PSI), acting as plastocyanin-ferderoxin oxidoreductase, catalyzes the final reaction. Together with light-harvesting antenna I, PSI forms a high-molecular-weight supercomplex of ~600 kDa, consisting of eighteen subunits and nearly two hundred co-factors. Assembly of the various components into a functional thylakoid membrane complex requires precise coordination, which is provided by the assembly machinery. Although this includes a small number of proteins (PSI assembly factors) that have been shown to play a role in the formation of PSI, the process as a whole, as well as the intricacy of its members, remains largely unexplored.
In the present work, two approaches were used to find candidate PSI assembly factors. First, EnsembleNet was used to select proteins thought to be functionally related to known PSI assembly factors in Arabidopsis thaliana (approach I), and second, co-immunoprecipitation (Co-IP) of tagged PSI assembly factors in Nicotiana tabacum was performed (approach II).
Here, the novel PSI assembly factors designated CO-EXPRESSED WITH PSI ASSEMBLY 1 (CEPA1) and Ycf4-INTERACTING PROTEIN 1 (Y4IP1) were identified. A. thaliana null mutants for CEPA1 and Y4IP1 showed a growth phenotype and pale leaves compared with the wild type. Biophysical experiments using pulse amplitude modulation (PAM) revealed insufficient electron transport on the PSII acceptor side. Biochemical analyses revealed that both CEPA1 and Y4IP1 are specifically involved in PSI accumulation in A. thaliana at the post-translational level but are not essential. Consistent with their roles as factors in the assembly of a thylakoid membrane protein complex, the two proteins localize to thylakoid membranes. Remarkably, cepa1 y4ip1 double mutants exhibited lethal phenotypes in early developmental stages under photoautotrophic growth. Finally, co-IP and native gel experiments supported a possible role for CEPA1 and Y4IP1 in mediating PSI assembly in conjunction with other PSI assembly factors (e.g., PPD1- and PSA3-CEPA1 and Ycf4-Y4IP1). The fact that CEPA1 and Y4IP1 are found exclusively in green algae and higher plants suggests eukaryote-specific functions. Although the specific mechanisms need further investigation, CEPA1 and Y4IP1 are two novel assembly factors that contribute to PSI formation.
In recent decades, astronomy has seen a boom in large-scale stellar surveys of the Galaxy. The detailed information obtained about millions of individual stars in the Milky Way is bringing us a step closer to answering one of the most outstanding questions in astrophysics: how do galaxies form and evolve? The Milky Way is the only galaxy where we can dissect many stars into their high-dimensional chemical composition and complete phase space, which analogously as fossil records can unveil the past history of the genesis of the Galaxy. The processes that lead to large structure formation, such as the Milky Way, are critical for constraining cosmological models; we call this line of study Galactic archaeology or near-field cosmology.
At the core of this work, we present a collection of efforts to chemically and dynamically characterise the disks and bulge of our Galaxy. The results we present in this thesis have only been possible thanks to the advent of the Gaia astrometric satellite, which has revolutionised the field of Galactic archaeology by precisely measuring the positions, parallax distances and motions of more than a billion stars. Another, though not less important, breakthrough is the APOGEE survey, which has observed spectra in the near-infrared peering into the dusty regions of the Galaxy, allowing us to determine detailed chemical abundance patterns in hundreds of thousands of stars. To accurately depict the Milky Way structure, we use and develop the Bayesian isochrone fitting tool/code called StarHorse; this software can predict stellar distances, extinctions and ages by combining astrometry, photometry and spectroscopy based on stellar evolutionary models. The StarHorse code is pivotal to calculating distances where Gaia parallaxes alone cannot allow accurate estimates.
We show that by combining Gaia, APOGEE, photometric surveys and using StarHorse, we can produce a chemical cartography of the Milky way disks from their outermost to innermost parts. Such a map is unprecedented in the inner Galaxy. It reveals a continuity of the bimodal chemical pattern previously detected in the solar neighbourhood, indicating two populations with distinct formation histories. Furthermore, the data reveals a chemical gradient within the thin disk where the content of 𝛼-process elements and metals is higher towards the centre. Focusing on a sample in the inner MW we confirm the extension of the chemical duality to the innermost regions of the Galaxy. We find stars with bar shape orbits to show both high- and low-𝛼 abundances, suggesting the bar formed by secular evolution trapping stars that already existed. By analysing the chemical orbital space of the inner Galactic regions, we disentangle the multiple populations that inhabit this complex region. We reveal the presence of the thin disk, thick disk, bar, and a counter-rotating population, which resembles the outcome of a perturbed proto-Galactic disk. Our study also finds that the inner Galaxy holds a high quantity of super metal-rich stars up to three times solar suggesting it is a possible repository of old super-metal-rich stars found in the solar neighbourhood.
We also enter into the complicated task of deriving individual stellar ages. With StarHorse, we calculate the ages of main-sequence turn-off and sub-giant stars for several public spectroscopic surveys. We validate our results by investigating linear relations between chemical abundances and time since the 𝛼 and neutron capture elements are sensitive to age as a reflection of the different enrichment timescales of these elements. For further study of the disks in the solar neighbourhood, we use an unsupervised machine learning algorithm to delineate a multidimensional separation of chrono-chemical stellar groups revealing the chemical thick disk, the thin disk, and young 𝛼-rich stars. The thick disk is shown to have a small age dispersion indicating its fast formation contrary to the thin disk that spans a wide range of ages.
With groundbreaking data, this thesis encloses a detailed chemo-dynamical view of the disk and bulge of our Galaxy. Our findings on the Milky Way can be linked to the evolution of high redshift disk galaxies, helping to solve the conundrum of galaxy formation.
Cosmic rays (CRs) constitute an important component of the interstellar medium (ISM) of galaxies and are thought to play an essential role in governing their evolution. In particular, they are able to impact the dynamics of a galaxy by driving galactic outflows or heating the ISM and thereby affecting the efficiency of star-formation. Hence, in order to understand galaxy formation and evolution, we need to accurately model this non-thermal constituent of the ISM. But except in our local environment within the Milky Way, we do not have the ability to measure CRs directly in other galaxies. However, there are many ways to indirectly observe CRs via the radiation they emit due to their interaction with magnetic and interstellar radiation fields as well as with the ISM.
In this work, I develop a numerical framework to calculate the spectral distribution of CRs in simulations of isolated galaxies where a steady-state between injection and cooling is assumed. Furthermore, I calculate the non-thermal emission processes arising from the modelled CR proton and electron spectra ranging from radio wavelengths up to the very high-energy gamma-ray regime.
I apply this code to a number of high-resolution magneto-hydrodynamical (MHD) simulations of isolated galaxies, where CRs are included. This allows me to study their CR spectra and compare them to observations of the CR proton and electron spectra by the Voyager-1 satellite and the AMS-02 instrument in order to reveal the origin of the measured spectral features.
Furthermore, I provide detailed emission maps, luminosities and spectra of the non-thermal emission from our simulated galaxies that range from dwarfs to Milk-Way analogues to starburst galaxies at different evolutionary stages. I successfully reproduce the observed relations between the radio and gamma-ray luminosities with the far-infrared (FIR) emission of star-forming (SF) galaxies, respectively, where the latter is a good tracer of the star-formation rate. I find that highly SF galaxies are close to the limit where their CR population would lose all of their energy due to the emission of radiation, whereas CRs tend to escape low SF galaxies more quickly. On top of that, I investigate the properties of CR transport that are needed in order to match the observed gamma-ray spectra.
Furthermore, I uncover the underlying processes that enable the FIR-radio correlation (FRC) to be maintained even in starburst galaxies and find that thermal free-free-emission naturally explains the observed radio spectra in SF galaxies like M82 and NGC 253 thus solving the riddle of flat radio spectra that have been proposed to contradict the observed tight FRC.
Lastly, I scrutinise the steady-state modelling of the CR proton component by investigating for the first time the influence of spectrally resolved CR transport in MHD simulations on the hadronic gamma-ray emission of SF galaxies revealing new insights into the observational signatures of CR transport both spectrally and spatially.
Many widely used observational data sets are comprised of several overlapping instrument records. While data inter-calibration techniques often yield continuous and reliable data for trend analysis, less attention is generally paid to maintaining higher-order statistics such as variance and autocorrelation. A growing body of work uses these metrics to quantify the stability or resilience of a system under study and potentially to anticipate an approaching critical transition in the system. Exploring the degree to which changes in resilience indicators such as the variance or autocorrelation can be attributed to non-stationary characteristics of the measurement process – rather than actual changes in the dynamical properties of the system – is important in this context. In this work we use both synthetic and empirical data to explore how changes in the noise structure of a data set are propagated into the commonly used resilience metrics lag-one autocorrelation and variance. We focus on examples from remotely sensed vegetation indicators such as vegetation optical depth and the normalized difference vegetation index from different satellite sources. We find that time series resulting from mixing signals from sensors with varied uncertainties and covering overlapping time spans can lead to biases in inferred resilience changes. These biases are typically more pronounced when resilience metrics are aggregated (for example, by land-cover type or region), whereas estimates for individual time series remain reliable at reasonable sensor signal-to-noise ratios. Our work provides guidelines for the treatment and aggregation of multi-instrument data in studies of critical transitions and resilience.
In this work, binding interactions between biomolecules were analyzed by a technique that is based on electrically controllable DNA nanolevers. The technique was applied to virus-receptor interactions for the first time. As receptors, primarily peptides on DNA nanostructures and antibodies were utilized. The DNA nanostructures were integrated into the measurement technique and enabled the presentation of the peptides in a controllable geometrical order. The number of peptides could be varied to be compatible to the binding sites of the viral surface proteins.
Influenza A virus served as a model system, on which the general measurability was demonstrated. Variations of the receptor peptide, the surface ligand density, the measurement temperature and the virus subtypes showed the sensitivity and applicability of the technology. Additionally, the immobilization of virus particles enabled the measurement of differences in oligovalent binding of DNA-peptide nanostructures to the viral proteins in their native environment.
When the coronavirus pandemic broke out in 2020, work on binding interactions of a peptide from the hACE2 receptor and the spike protein of the SARS-CoV-2 virus revealed that oligovalent binding can be quantified in the switchSENSE technology. It could also be shown that small changes in the amino acid sequence of the spike protein resulted in complete loss of binding. Interactions of the peptide and inactivated virus material as well as pseudo virus particles could be measured. Additionally, the switchSENSE technology was utilized to rank six antibodies for their binding affinity towards the nucleocapsid protein of SARS-CoV-2 for the development of a rapid antigen test device.
The technique was furthermore employed to show binding of a non-enveloped virus (adenovirus) and a virus-like particle (norovirus-like particle) to antibodies. Apart from binding interactions, the use of DNA origami levers with a length of around 50 nm enabled the switching of virus material. This proved that the technology is also able to size objects with a hydrodynamic diameter larger than 14 nm.
A theoretical work on diffusion and reaction-limited binding interactions revealed that the technique and the chosen parameters enable the determination of binding rate constants in the reaction-limited regime.
Overall, the applicability of the switchSENSE technique to virus-receptor binding interactions could be demonstrated on multiple examples. While there are challenges that remain, the setup enables the determination of affinities between viruses and receptors in their native environment. Especially the possibilities regarding the quantification of oligo- and multivalent binding interactions could be presented.
Selenium (Se) is an essential trace element that is ubiquitously present in the environment in small concentrations. Essential functions of Se in the human body are manifested through the wide range of proteins, containing selenocysteine as their active center. Such proteins are called selenoproteins which are found in multiple physiological processes like antioxidative defense and the regulation of thyroid hormone functions. Therefore, Se deficiency is known to cause a broad spectrum of physiological impairments, especially in endemic regions with low Se content. Nevertheless, being an essential trace element, Se could exhibit toxic effects, if its intake exceeds tolerable levels. Accordingly, this range between deficiency and overexposure represents optimal Se supply. However, this range was found to be narrower than for any other essential trace element. Together with significantly varying Se concentrations in soil and the presence of specific bioaccumulation factors, this represents a noticeable difficulty in the assessment of Se
epidemiological status. While Se is acting in the body through multiple selenoproteins, its intake occurs mainly in form of small organic or inorganic molecular mass species. Thus, Se exposure not only depends on daily intake but also on the respective chemical form, in which it is present.
The essential functions of selenium have been known for a long time and its primary forms in different food sources have been described. Nevertheless, analytical capabilities for a comprehensive investigation of Se species and their derivatives have been introduced only in the last decades. A new Se compound was identified in 2010 in the blood and tissues of bluefin tuna. It was called selenoneine (SeN) since it is an isologue of naturally occurring antioxidant ergothioneine (ET), where Se replaces sulfur. In the following years, SeN was identified in a number of edible fish species and attracted attention as a new dietary Se source and potentially strong antioxidant. Studies in populations whose diet largely relies on fish revealed that SeN
represents the main non-protein bound Se pool in their blood. First studies, conducted with enriched fish extracts, already demonstrated the high antioxidative potential of SeN and its possible function in the detoxification of methylmercury in fish. Cell culture studies demonstrated, that SeN can utilize the same transporter as ergothioneine, and SeN metabolite was found in human urine.
Until recently, studies on SeN properties were severely limited due to the lack of ways to obtain the pure compound. As a predisposition to this work was firstly a successful approach to SeN synthesis in the University of Graz, utilizing genetically modified yeasts. In the current study, by use of HepG2 liver carcinoma cells, it was demonstrated, that SeN does not cause toxic effectsup to 100 μM concentration in hepatocytes. Uptake experiments showed that SeN is not bioavailable to the used liver cells.
In the next part a blood-brain barrier (BBB) model, based on capillary endothelial cells from the porcine brain, was used to describe the possible transfer of SeN into the central nervous system (CNS). The assessment of toxicity markers in these endothelial cells and monitoring of barrier conditions during transfer experiments demonstrated the absence of toxic effects from SeN on the BBB endothelium up to 100 μM concentration. Transfer data for SeN showed slow but substantial transfer. A statistically significant increase was observed after 48 hours following SeN incubation from the blood-facing side of the barrier. However, an increase in Se content was clearly visible already after 6 hours of incubation with 1 μM of SeN. While the transfer rate of SeN after application of 0.1 μM dose was very close to that for 1 μM, incubation with 10 μM of SeN resulted in a significantly decreased transfer rate. Double-sided application of SeN caused no side-specific transfer of SeN, thus suggesting a passive diffusion mechanism of SeN across the BBB. This data is in accordance with animal studies, where ET accumulation was observed in the rat brain, even though rat BBB does not have the primary ET transporter – OCTN1. Investigation of capillary endothelial cell monolayers after incubation with SeN and reference selenium compounds showed no significant increase of intracellular selenium concentration. Speciesspecific Se measurements in medium samples from apical and basolateral compartments, as good as in cell lysates, showed no SeN metabolization. Therefore, it can be concluded that SeN may reach the brain without significant transformation.
As the third part of this work, the assessment of SeN antioxidant properties was performed in Caco-2 human colorectal adenocarcinoma cells. Previous studies demonstrated that the intestinal epithelium is able to actively transport SeN from the intestinal lumen to the blood side and accumulate SeN. Further investigation within current work showed a much higher antioxidant potential of SeN compared to ET. The radical scavenging activity after incubation with SeN was close to the one observed for selenite and selenomethionine. However, the SeN effect on the viability of intestinal cells under oxidative conditions was close to the one caused by ET. To answer the question if SeN is able to be used as a dietary Se source and induce the activity of selenoproteins, the activity of glutathione peroxidase (GPx) and the secretion of selenoprotein P (SelenoP) were measured in Caco-2 cells, additionally. As expected, reference selenium compounds selenite and selenomethionine caused efficient induction of GPx activity. In contrast to those SeN had no effect on GPx activity. To examine the possibility of SeN being embedded into the selenoproteome, SelenoP was measured in a culture medium. Even though Caco-2 cells effectively take up SeN in quantities much higher than selenite or selenomethionine, no secretion of SelenoP was observed after SeN incubation.
Summarizing, we can conclude that SeN can hardly serve as a Se source for selenoprotein synthesis. However, SeN exhibit strong antioxidative properties, which appear when sulfur in ET is exchanged by Se. Therefore, SeN is of particular interest for research not as part of Se metabolism, but important endemic dietary antioxidant.
Für eine gelingende Kommunikation und Zusammenarbeit zwischen Therapeut:innen und Eltern sind meines Erachtens zwei Aspekte wesentlich: die therapeutische Haltung/innere Einstellung zur Beziehungsgestaltung auf Seiten der Therapeut:innen sowie ihr Wissen und die Fähigkeiten, Eltern ganz pragmatisch in den therapeutischen Prozess einzubinden.
Both horizontal-to-vertical (H/V) spectral ratios and the spatial autocorrelation method (SPAC) have proven to be valuable tools to gain insight into local site effects by ambient noise measurements. Here, the two methods are employed to assess the subsurface velocity structure at the Piano delle Concazze area on Mt Etna. Volcanic tremor records from an array of 26 broadband seismometers is processed and a strong variability of H/V ratios during periods of increased volcanic activity is found. From the spatial distribution of H/V peak frequencies, a geologic structure in the north-east of Piano delle Concazze is imaged which is interpreted as the Ellittico caldera rim. The method is extended to include both velocity data from the broadband stations and distributed acoustic sensing data from a co-located 1.5 km long fibre optic cable. High maximum amplitude values of the resulting ratios along the trajectory of the cable coincide with known faults. The outcome also indicates previously unmapped parts of a fault. The geologic interpretation is in good agreement with inversion results from magnetic survey data. Using the neighborhood algorithm, spatial autocorrelation curves obtained from the modified SPAC are inverted alone and jointly with the H/V peak frequencies for 1D shear wave velocity profiles. The obtained models are largely consistent with published models and were able to validate the results from the fibre optic cable.
In the present thesis, AC electrokinetic forces, like dielectrophoresis and AC electroosmosis, were demonstrated as a simple and fast method to functionalize the surface of nanoelectrodes with submicrometer sized biological objects. These nanoelectrodes have a cylindrical shape with a diameter of 500 nm arranged in an array of 6256 electrodes. Due to its medical relevance influenza virus as well as anti-influenza antibodies were chosen as a model organism. Common methods to bring antibodies or proteins to biosensor surfaces are complex and time-consuming. In the present work, it was demonstrated that by applying AC electric fields influenza viruses and antibodies can be immobilized onto the nanoelectrodes within seconds without any prior chemical modification of neither the surface nor the immobilized biological object. The distribution of these immobilized objects is not uniform over the entire array, it exhibits a decreasing gradient from the outer row to the inner ones. Different causes for this gradient have been discussed, such as the vortex-shaped fluid motion above the nanoelectrodes generated by, among others, electrothermal fluid flow. It was demonstrated that parts of the accumulated material are permanently immobilized to the electrodes. This is a unique characteristic of the presented system since in the literature the AC electrokinetic immobilization is almost entirely presented as a method just for temporary immobilization. The spatial distribution of the immobilized viral material or the anti-influenza antibodies at the electrodes was observed by either the combination of fluorescence microscopy and deconvolution or by super-resolution microscopy (STED). On-chip immunoassays were performed to examine the suitability of the functionalized electrodes as a potential affinity-based biosensor. Two approaches were pursued: A) the influenza virus as the bio-receptor or B) the influenza virus as the analyte. Different sources of error were eliminated by ELISA and passivation experiments. Hence, the activity of the immobilized object was inspected by incubation with the analyte. This resulted in the successful detection of anti-influenza antibodies by the immobilized viral material. On the other hand, a detection of influenza virus particles by the immobilized anti-influenza antibodies was not possible. The latter might be due to lost activity or wrong orientation of the antibodies. Thus, further examinations on the activity of by AC electric fields immobilized antibodies should follow. When combined with microfluidics and an electrical read-out system, the functionalized chips possess the potential to serve as a rapid, portable, and cost-effective point-of-care (POC) device. This device can be utilized as a basis for diverse applications in diagnosing and treating influenza, as well as various other pathogens.
‚Maise Jeschurun‘
(2023)
The birth of the Yishuv’s national shipping company, ZIM was preceded by private enterprise; the sea had not traditionally been a focus of the Zionist movement. In the 1930s, a five-year span of private commercial shipping saw three companies in the Jewish community in Palestine – Palestine Shipping Company, Palestine Maritime Lloyd, and Atid – before shipping was cut short by the outbreak of the Second World War. Despite their brief lifespans and their negligible contribution to general shipping, these companies constituted an important milestone. Their existence helped shift the Yishuv leadership’s attitudes about shipping’s importance for the community and the need for it to be supported by national institutions.
Mothers of Seafaring
(2023)
The article aims to trace the contribution of Jewish women in the Yishuv’s maritime history. Taking the example of Henrietta Diamond, a founding member and chairperson of the Zebulun Seafaring Society, the article seeks to explore the representation and role of women in a growing Jewish maritime domain from the 1930s to the 1950s. It examines Zionist narratives on the ‘New Jew’ and the Jewish body and studies their relevance for the emerging field of maritime activities in the Yishuv. By contextualizing the work and depiction of Henrietta Diamond, the article sheds new light on the gendered notions that underlay the emergence of the Jewish maritime domain and illustrates the patterns of inclusion and exclusion in it.
Properties of Arctic aerosol in the transition between Arctic haze to summer season derived by lidar
(2023)
During the Arctic haze period, the Arctic troposphere consists of larger, yet fewer, aerosol particles than during the summer (Tunved et al., 2013; Quinn et al., 2007). Interannual variability (Graßl and Ritter, 2019; Rinke et al., 2004), as well as unknown origins (Stock et al., 2014) and properties of aerosol complicate modeling these annual aerosol cycles. This thesis investigates the modification of the microphysical properties of Arctic aerosols in the transition from Arctic haze to the summer season. Therefore, lidar measurements of Ny-Ålesund from April 2021 to the end of July 2021 are evaluated based on the aerosols’ optical properties. An overview of those properties will be provided. Furthermore, parallel radiosonde data is considered for indication of hygroscopic growth.
The annual aerosol cycle in 2021 differs from expectations based on previous studies from Tunved et al. (2013) and Quinn et al. (2007). Developments of backscatter, extinction, aerosol depolarisation, lidar ratio and color ratio show a return of the Arctic haze in May. The haze had already reduced in April, but regrew afterwards.
The average Arctic aerosol displays hygroscopic behaviour, meaning growth due to water uptake. To determine such a behaviour is generally laborious because various meteorological circumstances need to be considered. Two case studies provide further information on these possible events. In particular, a day with a rare ice cloud and with highly variable water cloud layers is observed.
The Andean Cordillera is a mountain range located at the western South American margin and is part of the Eastern- Circum-Pacific orogenic Belt. The ~7000 km long mountain range is one of the longest on Earth and hosts the second largest orogenic plateau in the world, the Altiplano-Puna plateau. The Andes are known as a non-collisional subduction-type orogen which developed as a result of the interaction between the subducted oceanic Nazca plate and the South American continental plate. The different Andean segments exhibit along-strike variations of morphotectonic provinces characterized by different elevations, volcanic activity, deformation styles, crustal thickness, shortening magnitude and oceanic plate geometry. Most of the present-day elevation can be explained by crustal shortening in the last ~50 Ma, with the shortening magnitude decreasing from ~300 km in the central (15°S-30°S) segment to less than half that in the southern part (30°S-40°S). Several factors were proposed that might control the magnitude and acceleration of shortening of the Central Andes in the last 15 Ma. One important factor is likely the slab geometry. At 27-33°S, the slab dips horizontally at ~100 km depth due to the subduction of the buoyant Juan Fernandez Ridge, forming the Pampean flat-slab. This horizontal subduction is thought to influence the thermo-mechanical state of the Sierras Pampeanas foreland, for instance, by strengthening the lithosphere and promoting the thick-skinned propagation of deformation to the east, resulting in the uplift of the Sierras Pampeanas basement blocks. The flat-slab has migrated southwards from the Altiplano latitude at ~30 Ma to its present-day position and the processes and consequences associated to its passage on the contemporaneous acceleration of the shortening rate in Central Andes remain unclear. Although the passage of the flat-slab could offer an explanation to the acceleration of the shortening, the timing does not explain the two pulses of shortening at about 15 Ma and 4 Ma that are suggested from geological observations. I hypothesize that deformation in the Central Andes is controlled by a complex interaction between the subduction dynamics of the Nazca plate and the dynamic strengthening and weakening of the South American plate due to several upper plate processes. To test this hypothesis, a detailed investigation into the role of the flat-slab, the structural inheritance of the continental plate, and the subduction dynamics in the Andes is needed. Therefore, I have built two classes of numerical thermo-mechanical models: (i) The first class of models are a series of generic E-W-oriented high-resolution 2D subduction models thatinclude flat subduction in order to investigate the role of the subduction dynamics on the temporal variability of the shortening rate in the Central Andes at Altiplano latitudes (~21°S). The shortening rate from the models was then validated with the observed tectonic shortening rate in the Central Andes. (ii) The second class of models are a series of 3D data-driven models of the present-day Pampean flat-slab configuration and the Sierras Pampeanas (26-42°S). The models aim to investigate the relative contribution of the present-day flat subduction and inherited structures in the continental lithosphere on the strain localization. Both model classes were built using the advanced finite element geodynamic code ASPECT.
The first main finding of this work is to suggest that the temporal variability of shortening in the Central Andes is primarily controlled by the subduction dynamics of the Nazca plate while it penetrates into the mantle transition zone. These dynamics depends on the westward velocity of the South American plate that provides the main crustal shortening force to the Andes and forces the trench to retreat. When the subducting plate reaches the lower mantle, it buckles on it-self until the forced trench retreat causes the slab to steepen in the upper mantle in contrast with the classical slab-anchoring model. The steepening of the slab hinders the trench causing it to resist the advancing South American plate, resulting in the pulsatile shortening. This buckling and steepening subduction regime could have been initiated because of the overall decrease in the westwards velocity of the South American plate. In addition, the passage of the flat-slab is required to promote the shortening of the continental plate because flat subduction scrapes the mantle lithosphere, thus weakening the continental plate. This process contributes to the efficient shortening when the trench is hindered, followed by mantle lithosphere delamination at ~20 Ma. Finally, the underthrusting of the Brazilian cratonic shield beneath the orogen occurs at ~11 Ma due to the mechanical weakening of the thick sediments covered the shield margin, and due to the decreasing resistance of the weakened lithosphere of the orogen.
The second main finding of this work is to suggest that the cold flat-slab strengthens the overriding continental lithosphere and prevents strain localization. Therefore, the deformation is transmitted to the eastern front of the flat-slab segment by the shear stress operating at the subduction interface, thus the flat-slab acts like an indenter that “bulldozes” the mantle-keel of the continental lithosphere. The offset in the propagation of deformation to the east between the flat and steeper slab segments in the south causes the formation of a transpressive dextral shear zone. Here, inherited faults of past tectonic events are reactivated and further localize the deformation in an en-echelon strike-slip shear zone, through a mechanism that I refer to as “flat-slab conveyor”. Specifically, the shallowing of the flat-slab causes the lateral deformation, which explains the timing of multiple geological events preceding the arrival of the flat-slab at 33°S. These include the onset of the compression and of the transition between thin to thick-skinned deformation styles resulting from the crustal contraction of the crust in the Sierras Pampeanas some 10 and 6 Myr before the Juan Fernandez Ridge collision at that latitude, respectively.
Late-type stars are by far the most frequent stars in the universe and of fundamental interest to various fields of astronomy – most notably to Galactic archaeology and exoplanet research. However, such stars barely change during their main sequence lifetime; their temperature, luminosity, or chemical composition evolve only very slowly over the course of billions of years. As such, it is difficult to obtain the age of such a star, especially when it is isolated and no other indications (like cluster association) can be used. Gyrochronology offers a way to overcome this problem.
Stars, just like all other objects in the universe, rotate and the rate at which stars rotate impacts many aspects of their appearance and evolution. Gyrochronology leverages the observed rotation rate of a late-type main sequence star and its systematic evolution to estimate their ages. Unlike the above-mentioned parameters, the rotation rate of a main sequence star changes drastically throughout its main sequence lifetime; stars spin down. The youngest stars rotate every few hours, whereas much older stars rotate only about once a month, or – in the case of some late M-stars – once in a hundred days. Given that this spindown is systematic (with an additional mass dependence), it gave rise to the idea of using the observed rotation rate of a star (and its mass or a suitable proxy thereof) to estimate a star’s age. This has been explored widely in young stellar open clusters but remains essentially unconstrained for stars older than the sun, and K and M stars older than 1 Gyr.
This thesis focuses on the continued exploration of the spindown behavior to assess, whether gyrochronology remains applicable for stars of old ages, whether it is universal for late-type main sequence stars (including field stars), and to provide calibration mileposts for spindown models. To accomplish this, I have analyzed data from Kepler space telescope for the open clusters Ruprecht 147 (2.7 Gyr old) and M 67 (4 Gyr). Time series photometry data (light curves)
were obtained for both clusters during Kepler’s K2 mission. However, due to technical limitations and telescope malfunctions, extracting usable data from the K2 mission to identify (especially long) rotation periods requires extensive data preparation.
For Ruprecht 147, I have compiled a list of about 300 cluster members from the literature and adopted preprocessed light curves from the Kepler archive where available. They have been cleaned of the gravest of data artifacts but still contained systematics. After correcting them for said artifacts, I was able to identify rotation periods in 31 of them.
For M 67 more effort was taken. My work on Ruprecht 147 has shown the limitations imposed by the preselection of Kepler targets. Therefore, I adopted the time series full frame image directly and performed photometry on a much higher spatial resolution to be able to obtain data for as many stars as possible. This also means that I had to deal with the ubiquitous artifacts in Kepler data. For that, I devised a method that correlates the artificial flux variations with the ongoing drift of the telescope pointing in order to remove it. This process was a large success and I was able to create light curves whose quality match and even exceede those that were created by the Kepler mission – all while operating on higher spatial resolution and processing fainter stars. Ultimately, I was able to identify signs of periodic variability in the (created) light curves for 31 and 47 stars in Ruprecht 147 and M 67, respectively. My data connect well to bluer stars of cluster of the same age and extend for the first time to stars redder than early-K and older than 1 Gyr. The cluster data show a clear flattening in the distribution of Ruprecht 147 and even a downturn for M 67, resulting in a somewhat sinusoidal shape. With that, I have shown that the systematic spindown of stars continues at least until 4 Gyr and stars continue to live on a single surface in age-rotation periods-mass space which allows gyrochronology to be used at least up to that age. However, the shape of the spindown – as exemplified by the newly discovered sinusoidal shape of the cluster sequence – deviates strongly from the expectations.
I then compiled an extensive sample of rotation data in open clusters – very much including my own work – and used the resulting cluster skeleton (with each cluster forming a rip in color-rotation period-mass space) to investigate if field stars follow the same spindown as cluster stars. For the field stars, I used wide binaries, which – with their shared origin and coevality – are in a sense the smallest possible open clusters. I devised an empirical method to evaluate the consistency between the rotation rates of the wide binary components and found that the vast majority of them are in fact consistent with what is observed in open clusters. This leads me to conclude that gyrochronology – calibrated on open clusters – can be applied to determine the ages of field stars.
Das 16. Herbsttreffen Patholinguistik mit dem Schwerpunktthema »Schnittstelle Alltag: Transfer und Teilhabe in der Sprachtherapie« fand am 19.11.2022 als Online-Veranstaltung statt. Das Herbsttreffen wird seit 2007 jährlich vom Verband für Patholinguistik e.V. (vpl), seit 2021 vom Deutschen Bundesverband für akademische Sprachtherapie und Logopädie (dbs) in Kooperation mit der Universität Potsdam durchgeführt. Der vorliegende Tagungsband beinhaltet die Vorträge zum Schwerpunktthema sowie die Posterpräsentationen zu weiteren Themen aus der sprachtherapeutischen Forschung und Praxis.
Complex emulsions are dispersions of kinetically stabilized multiphasic emulsion droplets comprised of two or more immiscible liquids that provide a novel material platform for the generation of active and dynamic soft materials. In recent years, the intrinsic reconfigurable morphological behavior of complex emulsions, which can be attributed to the unique force equilibrium between the interfacial tensions acting at the various interfaces, has become of fundamental and applied interest. As such, particularly biphasic Janus droplets have been investigated as structural templates for the generation of anisotropic precision objects, dynamic optical elements or as transducers and signal amplifiers in chemo- and bio-sensing applications. In the present thesis, switchable internal morphological responses of complex droplets triggered by stimuli-induced alterations of the balance of interfacial tensions have been explored as a universal building block for the design of multiresponsive, active, and adaptive liquid colloidal systems. A series of underlying principles and mechanisms that influence the equilibrium of interfacial tensions have been uncovered, which allowed the targeted design of emulsion bodies that can alter their shape, bind and roll on surfaces, or change their geometrical shape in response to chemical stimuli. Consequently, combinations of the unique triggerable behavior of Janus droplets with designer surfactants, such as a stimuli-responsive photosurfactant (AzoTAB) resulted for instance in shape-changing soft colloids that exhibited a jellyfish inspired buoyant motion behavior, holding great promise for the design of biological inspired active material architectures and transformable soft robotics.
In situ observations of spherical Janus emulsion droplets using a customized side-view microscopic imaging setup with accompanying pendant dropt measurements disclosed the sensitivity regime of the unique chemical-morphological coupling inside complex emulsions and enabled the recording of calibration curves for the extraction of critical parameters of surfactant effectiveness. The deduced new "responsive drop" method permitted a convenient and cost-efficient quantification and comparison of the critical micelle concentrations (CMCs) and effectiveness of various cationic, anionic, and nonionic surfactants. Moreover, the method allowed insightful characterization of stimuli-responsive surfactants and monitoring of the impact of inorganic salts on the CMC and surfactant effectiveness of ionic and nonionic surfactants. Droplet functionalization with synthetic crown ether surfactants yielded a synthetically minimal material platform capable of autonomous and reversible adaptation to its chemical environment through different supramolecular host-guest recognition events. Addition of metal or ammonium salts resulted in the uptake of the resulting hydrophobic complexes to the hydrocarbon hemisphere, whereas addition of hydrophilic ammonium compounds such as amino acids or polypeptides resulted in supramolecular assemblies at the hydrocarbon-water interface of the droplets. The multiresponsive material platform enabled interfacial complexation and
thus triggered responses of the droplets to a variety of chemical triggers including metal ions, ammonium compounds, amino acids, antibodies, carbohydrates as well as amino-functionalized solid surfaces.
In the final chapter, the first documented optical logic gates and combinatorial logic circuits based on complex emulsions are presented. More specifically, the unique reconfigurable and multiresponsive properties of complex emulsions were exploited to realize droplet-based logic gates of varying complexity using different stimuli-responsive surfactants in combination with diverse readout methods. In summary, different designs for multiresponsive, active, and adaptive liquid colloidal systems were presented and investigated, enabling the design of novel transformative chemo-intelligent soft material platforms.
Technologically important, environmentally friendly InP quantum dots (QDs) typically used as green and red emitters in display devices can achieve exceptional photoluminescence quantum yields (PL QYs) of near-unity (95-100%) when the-state-of-the-art core/shell heterostructure of the ZnSe inner/ZnS outer shell is elaborately applied. Nevertheless, it has only led to a few industrial applications as QD liquid crystal display (QD–LCD) which is applied to blue backlight units, even though QDs has a lot of possibilities that able to realize industrially feasible applications, such as QD light-emitting diodes (QD‒LEDs) and luminescence solar concentrator (LSC), due to their functionalizable characteristics.
Before introducing the main research, the theoretical basis and fundamentals of QDs are described in detail on the basis of the quantum mechanics and experimental synthetic results, where a concept of QD and colloidal QD, a type-I core/shell structure, a transition metal doped semiconductor QDs, the surface chemistry of QD, and their applications (LSC, QD‒LEDs, and EHD jet printing) are sequentially elucidated for better understanding. This doctoral thesis mainly focused on the connectivity between QD materials and QD devices, based on the synthesis of InP QDs that are composed of inorganic core (core/shell heterostructure) and organic shell (surface ligands on the QD surface). In particular, as for the former one (core/shell heterostructure), the ZnCuInS mid-shell as an intermediate layer is newly introduced between a Cu-doped InP core and a ZnS shell for LSC devices. As for the latter one (surface ligands), the ligand effect by 1-octanethiol and chloride ion are investigated for the device stability in QD‒LEDs and the printability of electro-hydrodynamic (EHD) jet printing system, in which this research explores the behavior of surface ligands, based on proton transfer mechanism on the QD surface.
Chapter 3 demonstrates the synthesis of strain-engineered highly emissive Cu:InP/Zn–Cu–In–S (ZCIS)/ZnS core/shell/shell heterostructure QDs via a one-pot approach. When this unconventional combination of a ZCIS/ZnS double shelling scheme is introduced to a series of Cu:InP cores with different sizes, the resulting Cu:InP/ZCIS/ZnS QDs with a tunable near-IR PL range of 694–850 nm yield the highest-ever PL QYs of 71.5–82.4%. These outcomes strongly point to the efficacy of the ZCIS interlayer, which makes the core/shell interfacial strain effectively alleviated, toward high emissivity. The presence of such an intermediate ZCIS layer is further examined by comparative size, structural, and compositional analyses. The end of this chapter briefly introduces the research related to the LSC devices, fabricated from Cu:InP/ZCIS/ZnS QDs, currently in progress.
Chapter 4 mainly deals with ligand effect in 1-octanethiol passivation of InP/ZnSe/ZnS QDs in terms of incomplete surface passivation during synthesis. This chapter demonstrates the lack of anionic carboxylate ligands on the surface of InP/ZnSe/ZnS quantum dots (QDs), where zinc carboxylate ligands can be converted to carboxylic acid or carboxylate ligands via proton transfer by 1-octanethiol. The as-synthesized QDs initially have an under-coordinated vacancy surface, which is passivated by solvent ligands such as ethanol and acetone. Upon exposure of 1-octanethiol to the QD surface, 1-octanthiol effectively induces the surface binding of anionic carboxylate ligands (derived from zinc carboxylate ligands) by proton transfer, which consequently exchanges ethanol and acetone ligands that bound on the incomplete QD surface. The systematic chemical analyses, such as thermogravimetric analysis‒mass spectrometry and proton nuclear magnetic resonance spectroscopy, directly show the interplay of surface ligands, and it associates with QD light-emitting diodes (QD‒LEDs).
Chapter 5 shows the relation between material stability of QDs and device stability of QD‒LEDs through the investigation of surface chemistry and shell thickness. In typical III–V colloidal InP quantum dots (QDs), an inorganic ZnS outermost shell is used to provide stability when overcoated onto the InP core. However, this work presents a faster photo-degradation of InP/ZnSe/ZnS QDs with a thicker ZnS shell than that with a thin ZnS shell when 1-octanethiol was applied as a sulfur source to form ZnS outmost shell. Herein, 1-octanethiol induces the form of weakly-bound carboxylate ligand via proton transfer on the QD surface, resulting in a faster degradation at UV light even though a thicker ZnS shell was formed onto InP/ZnSe QDs. Detailed insight into surface chemistry was obtained from proton nuclear magnetic resonance spectroscopy and thermogravimetric analysis–mass spectrometry. However, the lifetimes of the electroluminescence devices fabricated from InP/ZnSe/ZnS QDs with a thick or a thin ZnS shell show surprisingly the opposite result to the material stability of QDs, where the QD light-emitting diodes (QD‒LEDs) with a thick ZnS shelled QDs maintained its luminance more stable than that with a thin ZnS shelled QDs. This study elucidates the degradation mechanism of the QDs and the QD light-emitting diodes based on the results and discuss why the material stability of QDs is different from the lifetime of QD‒LEDs.
Chapter 6 suggests a method how to improve a printability of EHD jet printing when QD materials are applied to QD ink formulation, where this work introduces the application of GaP mid-shelled InP QDs as a role of surface charge in EHD jet printing technique. In general, GaP intermediate shell has been introduced in III–V colloidal InP quantum dots (QDs) to enhance their thermal stability and quantum efficiency in the case of type-I core/shell/shell heterostructure InP/GaP/ZnSeS QDs. Herein, these highly luminescent InP/GaP/ZnSeS QDs were synthesized and applied to EHD jet printing, by which this study demonstrates that unreacted Ga and Cl ions on the QD surface induce the operating voltage of cone jet and cone jet formation to be reduced and stabilized, respectively. This result indicates GaP intermediate shell not only improves PL QY and thermal stability of InP QDs but also adjusts the critical flow rate required for cone-jet formation. In other words, surface charges of quantum dots can have a significant role in forming cone apex in the EHD capillary nozzle. For an industrially convenient validation of surface charges on the QD surface, Zeta potential analyses of QD solutions as a simple method were performed, as well as inductively coupled plasma optical emission spectrometry (ICP-OES) for a composition of elements.
Beyond the generation of highly emissive InP QDs with narrow FWHM, these studies talk about the connection between QD material and QD devices not only to make it a vital jumping-off point for industrially feasible applications but also to reveal from chemical and physical standpoints the origin that obstructs the improvement of device performance experimentally and theoretically.
Facing the environmental crisis, new technologies are needed to sustain our society. In this context, this thesis aims to describe the properties and applications of carbon-based sustainable materials. In particular, it reports the synthesis and characterization of a wide set of porous carbonaceous materials with high nitrogen content obtained from nucleobases. These materials are used as cathodes for Li-ion capacitors, and a major focus is put on the cathode preparation, highlighting the oxidation resistance of nucleobase-derived materials. Furthermore, their catalytic properties for acid/base and redox reactions are described, pointing to the role of nitrogen speciation on their surfaces. Finally, these materials are used as supports for highly dispersed nickel loading, activating the materials for carbon dioxide electroreduction.
Functional materials, also called "Smart Materials", are described by their ability to fulfill a desired task through targeted interaction with its environment. Due to this functional integration, such materials are of increased interest, especially in areas where the increasing micronization of components is required. Modern manufacturing processes (e.g. microfluidics) and the availability of a wide variety of functional materials (e.g. shape memory materials) now enable the production of particle-based switching components. This category includes micropumps and microvalves, whose basic function is the active control of liquid flows. One approach in realizing those microcomponents as pursued by this work, enables variable size-switching of water-filled microballoons by implementing a stimulus-sensitive switching motif in the capsule's membrane shell, while being under the influence of a constant driving force. The switching motif with its gatekeeper function has a critical influence on one or more material parameters, which modulate the capsule's resistance against the driving force in microballoon expansion process. The advantage of this concept is that even non-variable analyte conditions, such as concentration levels of ions, can be capitalized to generate external force fields that, under the control of the membrane, cause an inflation of the microballoon by an osmotically driven water influx. In case of osmotic pressure gradients as the driving force for the capsule expansion, material parameters associated with the gatekeeper function are specifically the permeability and the mechanical stiffness of the shell material. While a modulation of the shell permeability could be utilized to kinetically impede the water influx on large time scales, a modulation of the shell's mechanical stiffness even might be utilized to completely prevent the capsule inflation due to a possible non-deformability beneath a certain threshold pressure. In polymer networks, which are a suitable material class for the demanded capsule shell because of their excellent elasticity, both the permeability and the mechanical properties are strongly influenced by the crystallinity of the material. Since the permeability is effectively reduced with increasing crystallinity, while the mechanical stiffness is simultaneously greatly increased, both effects point in the same direction in terms of their functional relationship. For this reason and due to a reversible and contactless modulation of the membrane crystallinity by heat input, crystallites may be suitable switching motifs for controlling the capsule expansion. As second design element of reversible expandable microballoons, the capsule geometry, defined by an aqueous core enveloped by the temperature-sensitive polymer network membrane, should allow an osmotic pressure gradient across the membrane layer. The strength of the inflation pressure and the associated inflation velocity upon membrane melting should be controlled by the salt concentration within the aqueous core, while a turn in the osmotic gradient should furthermore allow the reversible process of capsule deflation. Therefore, it should be possible to build either microvalves and micropumps, while their intended action of either pumping or valving is determined by their state of expansion and the direction of the osmotic pressure gradient.. Microballoons of approximately 300 µm in diameter were formed via droplet-based microfluidics from double-emulsion templates (w/o/w). The elastomeric capsule membrane was formed by photo-crosslinking of methacrylate (MA) functionalized oligo(ε-caprolactone) precursors (≈ 3.8 MA-arms, Mn ≈ 12000 g mol-1) within the organic medium layer (o) via UV-exposure after droplet-formation. After removal of the toluene/chloroform mixture by slow extraction via the continuous aqueous phase, the capsules solidified under the development of a characteristic "mushroom"-like shape at specific experimental conditions (e.g. λ = 308 nm, 57 mJ·s-1·cm-2, 16 min). It could be furthermore shown that in dependency to the process parameters: oligomer concentration and curing-time also spherical capsules were accessible. Long curing-times and high oligomer concentrations at a fixed light-intensity favored the formation of "mushroom"-like capsules, whereas the contrary led to spherical shaped capsules. A comparative study on thin polymer network films of same composition and equal treatment proved a correlation between the film's crosslink density and their contraction capability, while stronger crosslinked polymer networks showed a stronger contraction after solvent removal. In combination with observations during capsule solidification via light-microscopy, where a continuous shaping from almost spherical crosslinked templates to "mushroom"-shaped and solidified capsules was stated, the following mechanism was proposed. In case of low oligomer contents and short curing-times, the contraction of the capsule shell during solvent removal is strongly diminished due to a low degree of crosslinking. Therefore, the solidifying shell could freely collapse onto the aqueous core. In the other case, high oligomer concentrations and long curing-times will favor the formation of highly crosslinked capsule membranes with a strong contraction capability. Due to an observed decentered location of the aqueous core within the swollen polymer network, an uneven radial stress along the capsule's circumference is exerted to the incompressible core. This lead to an uneven contraction during solvent removal and a directed flow of the core fluid into the direction of the minimal stress vector. In consequence, the initially thicker spherical cap contracts, whereas the opposing thinner spherical cap get stretched. The "mushroom"-shape over some advantages over their spherical shaped counterparts, why they were selected for the further experiments. Besides the necessity of a high density of crosslinking for the purpose of extraordinary elasticity and toughness, the form-anisotropy promotes a faster microballoon expandability due to a partial reduction of the membrane thickness. Additionally, pre-stretched regions of thin thickness might provide a better resistance against inflation pressure than spherical but non-stretched capsules of equal membrane thickness. The resulting "mushroom"-shaped microcapsules exhibited a melting point of Tm ≈ 50 - 60 °C and a degree of crystallinity of Xc ≈ 29 - 38 % depending on the membrane thickness and internal salt content, which is slightly lower than for the non-crosslinked oligomer and reasoned by a limited chain mobility upon crosslinking. Nonetheless, the melting transition of the polymer network was associated with a strong drop in its mechanical stiffness, which was shown to have a strong influence on the osmotic driven expansion of the microcapsules. Capsules that were subjected to osmotic pressures between 1.5 and 4.7 MPa did not expand if the temperature was well below the melting point of the capsule's membrane, i.e. at room temperature. In contrast, a continuous expansion, while approaching asymptotically to a final capsule size, was observed if the temperature exceeded the melting point, i.e. 60 °C. Microballoons, which were kept for 56 days at ∆Π = 1.5 MPa and room temperature, did not change significantly in diameter, why the impact of the mechanical stiffness on the expansion behavior is considered to be the greater than the influence of the shell permeability. The time-resolved expansion behavior of the microballoons above their Tm was subsequently modeled, using difusion equations that were corrected for shape anisotropy and elastic restoring forces. A shape-related and expansion dependent pre-factor was used to dynamically address the influence of the shell thickness differences along the circumference on the inflation velocity, whereas the microballoon's elastic contraction upon inflation was rendered by the inclusion of a hyperelastic constitutive model. An important finding resulting from this model was the pronounced increase in inflation velocity compared to hypothetical capsules with a homogeneous shell thickness, which stresses the benefit of employing shape anisotropic balloon-like capsules in this study. Furthermore, the model was able to predict the finite expandability on basis of entropy-elastic recovery forces and strain-hardening effects. A comparison of six different microballoons with different shell thicknesses and internal salt contents showed the linear relationship between the volumetric expansion, the shell thickness and the applied osmotic pressure, as represented by the model. As the proposed model facilitates the prediction of the expansion kinetics depending on the membranes mechanical and diffusional characteristics, it might be a screening tool for future material selections. In course of the microballoon expansion process, capsules of intermediate diameters could be isolated by recrystallization of the membrane, which is mainly caused by a restoration of the membrane's mechanical stiffness and is otherwise difficult to achieve with other stimuli-sensitive systems. The capsule's crystallinity of intermediate expansion states was nearly unchanged, whereas the lamellar crystal size tends to decreased with the expansion ratio. Therefore, it was assumed that the elastic modulus was only minimally altered and might increased due to the networks segment-chain extension. In addition to the volume increase achieved by inflation, a turn in the osmotic gradient also facilitated the reversible deflation, which was shown in inflation/deflation cycles. These both characteristics of the introduced microballoons are important parameter regarding the realization of micropumps and microvalves. The fixation of expanded microcapsules via recrystallization enabled the storage of entropy-elastic strain-energy, which could be utilized for pumping actions in non-aqueous media. Here, the pumping velocity depended on both, the type of surrounding medium and the applied temperature. Surrounding media that supported the fast transport of pumped liquid showed an accelerated deflation, while high temperatures further accelerate the pumping velocity. Very fast rejection of the incorporated payload was furthermore realized with pierced expanded microballoons, which were subjected to temperatures above their Tm. The possible fixation of intermediate particle sizes provide opportunities for vent constructions that allowed the precise adjustment of specific flow-rates and multiple valve openings and closings. A valve construction was realized by the insertion of a single or multiple microballoons in a microfluidic channel. A complete and a partial closing of the microballoon-valves was demonstrated as a function of the heating period. In this context, a difference between the inflation and deflation velocity was stated, summarizing slower expansion kinetics. Overall, microballoons, which presented both on-demand pumping and reversible valving by a temperature-triggered change in the capsule's volume, might be suitable components that help to design fully integrated LOC devices, due to the implementation of the control switch and controllable inflation/deflation kinetics. In comparison to other state of the art stimuli-sensitive materials, one has to highlight the microballoons capability of stabilizing almost continuously intermediate capsule sizes by simple recrystallization of the microballoon's membrane.
Eine reflexive Haltung gegenüber der eigenen Lehrtätigkeit gilt als Schlüsselqualifikation in Bezug auf die Professionalisierung von Lehrer:innen in allen Didaktiken (GFD, 2004, S. 4). Das universitäre Seminarformat Lehr-Lern-Labor (LLLS) kann diese Haltung fördern (Rehfeldt et al., 2018). Das Lehrformat eignet sich außerdem zur Steigerung des Professionswissens und der unterrichtlichen Handlungsfähigkeit angehender Lehrer:innen (Rehfeldt et al., 2020; Brämer & Köster, 2021). Dieser Beitrag stellt, neben der grundsätzlichen Konzeption des Seminarformats, dessen Implementierung in vier verschiedenen Fachdidaktiken (Didaktiken des Englischen, der Geschichte, der Physik und Sachunterricht und seine Didaktik) vor. Ein Fokus liegt dabei auf der unterschiedlichen Umsetzung der Reflexionsphasen.
Reflexion ist eine Schlüsselkategorie für die professionelle Entwicklung von Lehrkräften, welche als Ausbildungsziel in den Bildungsstandards für die Lehrkräftebildung verankert ist. Eine Verstetigung universitär geprägter Forschung und Modellierung in der praxisnahen Anwendung im schulischen Kontext bietet Potentiale nachhaltiger Professionalisierung. Die Stärkung reflexionsbezogener Kompetenzen durch Empirie und Anwendung scheint eine phasenübergreifende Herausforderung der Lehrkräftebildung zu sein, die es zu bewältigen gilt. Ziele des Tagungsbandes Reflexion in der Lehrkräftebildung sind eine theoretische Schärfung des Konzeptes „Reflexive Professionalisierung“ und der Austausch über Fragen der Einbettung wirksamer reflexionsbezogener Lerngelegenheiten in die Lehrkräftebildung. Forschende und Lehrende der‚ drei Phasen (Studium, Referendariat sowie Fort- und Weiterbildung) der Lehrkräftebildung stellen Lehrkonzepte und Forschungsprojekte zum Thema Reflexion in der Lehrkräftebildung vor und diskutieren diese. Gemeinsam mit Teilnehmenden aller Phasen und von verschiedenen Standorten der Lehrkräftebildung werden zukünftige Herausforderungen identifiziert und Lösungsansätze herausgearbeitet.
In diesem Beitrag wird ein geplantes digitales Lehrkonzept für die universitäre Begleitung des Praxissemesters in den Fächern Biologie und Mathematik vorgestellt. Darin setzen sich Studierende im Praxissemester selbstständig fachspezifische Schwerpunkte für die Planung, Durchführung und Reflexion von Unterrichtsprojekten in der Schule. Optimalerweise ergibt sich aus den Unterrichtsprojekten auch eine fachbezogene Fragestellung, die von den Studierenden im Zuge Forschenden Lernens ergründet werden kann. Begleitet wird der gesamte Prozess durch systematisch angeleitete E-Peer-Assessments (E-PA). Dabei treten Studierende in Peers in den digitalen, schriftlichen Dialog über Unterricht und durchlaufen gemeinsam Reflexions- und Feedbackschleifen, welche durch die universitäre Seminarleitung instruiert werden.
Reflexion wird in diesem Artikel als Rückmeldung (Feedback) zu einem Sprachlernstand begriffen. Es soll anhand eines Fallbeispiels (IRF-Sequenz) aus dem Unterricht Deutsch als Zweitsprache (DaZ) der Frage nachgegangen werden, wie sich die Feedback-Interaktion gestaltet und inwiefern sich ihr Gelingen oder Misslingen erklären lässt. Dazu wird die evidenzbasierte Forschung zum effektiven Feedback nach Hattie (u. a. Hattie 2020; Hattie & Zierer 2020; Wisniewski & Zierer 2018) in die Analyse einbezogen. Zu wissen, welche Wirkung Feedbacks erzielen, hilft (angehenden) Lehrer:innen, das eigene Handeln zu reflektieren.
Die Professionalisierung angehender Lehrer:innen für Fragen rund um sprachliche Bildung, Deutsch als Zweitsprache und Mehrsprachigkeit ist in den letzten Jahren verstärkt in den Blick der Praxis und Forschung der Lehrer:innenbildung gerückt. Während der Fachdiskurs im Hinblick auf die Konstrukte (Handlungs-)Kompetenz und Einstellungen bereits vorgeschritten ist, stellen die Modellierung und Erforschung des Konstrukts Reflexion im Fach Deutsch als Fremd- und Zweitsprache (DaF*Z) noch ein Desiderat dar. Im Beitrag wird die Fachspezifik der Reflexion als eines der Qualifizierungsziele der Ausbildung von Lehrer:innen für die sprachlich und kulturell heterogene Schülerschaft diskutiert und eine Modellierung vorgestellt.
Reflexion im Dialog
(2023)
Fast 40 Jahre nach dem Erscheinen von Donald Schöns Buch „The Reflective Practitioner: How Professionals Think In Action“ (1984) ist das Konzept der „reflexiven Kompetenz“ immer noch hochaktuell und wird daher in akademischen Kreisen weiterhin intensiv diskutiert. Der Artikel greift die Diskussionen zu diesem Thema im Bereich der Fremdsprachenlehrkräftebildung auf und unterstreicht sie mit Beispielen aus der universitären Aus- und Fortbildungspraxis für Deutsch als Fremd- und Zweitsprache in Brasilien und Deutschland. Auffällig ist dabei, dass es sowohl bei den Fragestellungen als auch bei den Maßnahmen und Instrumenten zahlreiche Überschneidungen gibt. Reflexion als Ziel in der Lehrkräftebildung kann somit als übergreifendes Thema wahrgenommen und weiterentwickelt werden.
Auf der Zeitachse von Zyklusmodellen des Unterrichts wird der Handlungsreflexion eine zentrale Bedeutung zugesprochen: Vor seiner Umsetzung im Unterricht soll das kommende Handeln zunächst in einer antizipierenden Reflexion gedanklich entworfen werden, um seine Erfolgswahrscheinlichkeit zu erhöhen. Nach dem Unterricht soll es einer retrospektiven Reflexion unterzogen werden, in der die Handlungsumsetzung vor dem Hintergrund der Handlungsplanung evaluiert wird und Konsequenzen für künftige Handlungsplanungen gezogen werden. Trotz der Plausibilität dieses postulierten Zusammenhangs von antizipierender und retrospektiver Reflexion steht seine genauere empirische Untersuchung allerdings noch aus. In einer querschnittlichen Onlineerhebung werden diese beiden Reflexionsformen deshalb als generische Unterrichtsplanungsfähigkeit und Reflexionskompetenz spezifiziert, um ihren Zusammenhang mit Hilfe einer Stichprobe von angehenden Lehrkräften (N = 479) aus zwei Universitäten zu explorieren. Die gefundenen schwachen Zusammenhänge werden vor dem Hintergrund der Operationalisierungen und der Testmotivation der Teilnehmenden diskutiert.
Obwohl der Reflexion von Unterricht eine zentrale Bedeutung für Lehrkräfte zukommt, ist die Reflexionsfähigkeit von Lehramtsstudierenden oftmals nur gering ausgeprägt und wird auch in Praxisphasen nicht automatisch weiterentwickelt. Es besteht also bereits im Studium ein Bedarf, die Studierenden bei der Entwicklung dieser Fähigkeit zu unterstützen. Hier soll die nachfolgend vorgestellte Lernumgebung ansetzen und eine systematische Erfassung, Rückmeldung und Förderung der Reflexionsfähigkeit ermöglichen. Die Lernumgebung ist für das Lehramtsstudium im Fach Physik entwickelt und besteht aus einem Diagnoseinstrument mit daran anschließendem Assessment-Feedback und Fördermaterial. Erste Untersuchungen zur Validität zeigen, dass die Studierenden während der Bearbeitung des Diagnoseinstruments inhaltlich relevante Überlegungen anstellen sowie das erhaltene Assessment-Feedback inhaltlich sinnvoll interpretieren und auch dem Fördermaterial einen Mehrwert für ihre Professionalisierung zusprechen.
Seit 2016 wird ePortfolioarbeit an der Universität Vechta im Rahmen der vom BMBF geförderten Qualitätsoffensive Lehrerbildung (QLB) Projekte (BRIDGES I und II) mit einem eigens dafür entwickelten digitalen Tool konzeptioniert, implementiert und formativ evaluiert. Über entsprechende Aufgabenstellungen wird dabei studiumsbegleitend und insbesondere in Praxisphasen auf die Anregung von Reflexivität, die als grundlegende Schlüsselkompetenz pädagogischer Professionalität verstanden wird, fokussiert. Im Beitrag werden die Konzeptionierung und Implementierung digitaler Portfolioarbeit inkl. Anlassbeispielen zur Anregung von Reflexion in der Lehrkräftebildung vorgestellt. Zudem werden Chancen und Grenzen der Reflexionsanregung unter Zuhilfenahme eines digitalen Portfolios diskutiert. Dabei unterstützt auch die Betrachtung von Gelingensbedingungen für digitale Reflexionsanregung.
Kumulativer Aufbau der Reflexionskompetenz in den schulpraktischen Phasen der Lehrkräftebildung
(2023)
Die Reflexionskompetenz wird als zentrale Bedingung zur Professionalisierung im Lehrberuf angesehen. Um diese im Verlauf der Lehrkräftebildung zu entwickeln, müssen Etappenziele beschrieben werden, die sowohl das Lehramtsstudium als auch den Vorbereitungsdienst in den Blick nehmen. Ausbildende beider Phasen der Lehrkräftebildung haben dazu ein Kompetenzraster erarbeitet. Dieses soll einen Beitrag dazu leisten, die Progression der Reflexionskompetenz anhand von Handlungsschritten zu beschreiben. Den Handlungsschritten werden dann wiederum Entwicklungsstufen für die jeweiligen Praxisphasen (Blockpraktikum A, Schulpraktische Übungen, Blockpraktikum B, 2. Phase Ende) zugeordnet, die den Ausprägungsgrad der Reflexionskompetenz darstellen.
Im Rahmen der Förderung sozialer Teilhabe von Schüler:innen im Unterricht benötigen Lehrkräfte Reflexionskompetenzen, die es ihnen ermöglichen, mit den damit verbundenen Antinomien umzugehen. Davon ausgehend wird in diesem Beitrag ein Lehr-/Lernkonzept vorgestellt, welches auf die Förderung von Lehramtsstudierenden im Sinne einer reflexiven Inklusion abzielt. Der Fokus liegt auf dem Einsatz der Methode des Lauten Denkens, welches die Denk- und Problemlösungsprozesse der Studierenden beim Schauen von Unterrichtsvideos introspektiv erfasst. Das laut Gedachte wird anschließend für Metareflexionen genutzt. Inwiefern damit (fehlende) erfahrungsbasierte und wissenschaftliche Formen pädagogischen Wissens thematisiert und prozessbegleitend begegnet werden können, um eine Entwicklung von kritisch-reflexiven Kompetenzen zu fördern, wurde in einer Pilotphase im Rahmen eines Seminars erprobt. Ergänzend wurde die Anwendung des Lauten Denkens bei einzelnen Studierenden videographiert. Dazu werden erste Ergebnisse vorgestellt und ein Ausblick auf die weitere Nutzung und Erforschung der Methode für die Förderung von Reflexionsprozessen bei Lehramtsstudierenden im Seminarkontext gegeben.
Zur Reflexionsförderung wurde 2017/18 ein Aufgabenkonzept für Biologielehramtsstudierende an der Universität Bremen entwickelt, das gezielt im ersten fachdidaktischen Schulpraktikum eingesetzt wurde. Die ausgewerteten e-Portfolios zeigten, dass die studentischen Reflexionen die Dimensionen Theorieeinbezug, Perspektivenübernahme, Handlungsalternativen und Professionalisierung berücksichtigen, jedoch in den einzelnen Dimensionen nur durchschnittliche Ergebnisse in der Tiefe erzielt wurden. Deswegen wurde eine Intervention für die erste Phase der Lehrer:innenbildung entwickelt, die nach dem Design-Based Research-Ansatz (DBR) iterativ adaptiert wird und fremde Unterrichtsvideos einbindet. Ziel der Studie ist es, zu untersuchen, inwieweit die Intervention die fachdidaktische Reflexion in die Tiefe fördert. Als Datengrundlage wurden 28 Reflexionen inhaltsanalytisch ausgewertet. Erste Ergebnisse stellen dar, dass die Reflexionen hinsichtlich der Handlungsalternativen und der Professionalisierung von insgesamt vier Niveaustufen überwiegend die Niveaustufen 2 und 3 erreichen. Die Reflexionsdimensionen Theorieeinbezug und Perspektivenübernahme erfolgen hingegen auf Stufe 2, jedoch selten auf einer höheren Stufe. Die Ergebnisse werden hinsichtlich des weiteren Vorgehens diskutiert.
Reflexion – besser digital?
(2023)
Die Einführung des Praxissemesters in allen Lehramtsstudiengängen in NRW wurde mit der Forderung nach einer theoriegeleiteten Reflexion schulpraktischer Erfahrungen verbunden. Empirische Befunde deuten an, dass mithilfe videografierter Unterrichtsszenen eine Förderung der Reflexionskompetenz von Studierenden möglich ist. Vor diesem Hintergrund wurde im Wintersemester 2020 an der Universität Paderborn eine quasi-experimentelle Studie mit dem Ziel durchgeführt, die Entwicklung der Fähigkeit zur videobasierten Reflexion eigenen Unterrichtshandelns in realen Unterrichtssituationen im Kontrollgruppenvergleich zu untersuchen. Dabei reflektierte eine Versuchsgruppe Videovignetten des eigenen Unterrichts ohne weitere Hilfsmittel während eine andere Versuchsgruppe mithilfe einer digitalen Lernumgebung reflektierte, die die Möglichkeit zum Setzen von Sprungmarken, Annotationen und (kollaborativer) Kommentierung des Videos bot. Eine Kontrollgruppe reflektierte den eigenen Unterricht erinnerungs- und textbasiert. Die Ergebnisse weisen darauf hin, dass die Nutzung der digitalen Lernumgebung zu einer stärkeren Entwicklung der Reflexionskompetenz beitragen könnte.
Die Fähigkeit zur professionellen Unterrichtsreflexion ist eine Kernkompetenz von Lehrkräften, um den eigenen Unterricht weiterentwickeln zu können. Schon in der Lehramtsausbildung kann diese Kompetenz aufgebaut werden. Das transdisziplinäre Projekt FALKE-e hat das Ziel, die adaptive Erklärkompetenz von Lehramtsstudierenden in sechs unterschiedlichen Fächern zu messen und durch Reflexion videografierter Erkläreinheiten in fachdidaktischen Seminaren zu fördern. In Bezug auf das Reflektieren ergibt sich daraus die Fragestellung, inwiefern sich Zuwächse in der Reflexionskompetenz unterscheiden, wenn Studierende ihre eigenen videografierten Erklärungen (Selbstreflexion) oder die videografierten Erklärungen von Peers reflektieren (Fremdreflexion). In einer ersten Phase entwickeln Studierende in fachdidaktischen Seminaren Erkläreinheiten. Ein Teil der Studierenden (ca. 25 pro Fach) erprobt diese selbst in der Schule und wird dabei videografiert. Die übrigen Studierenden (ca. 25 pro Fach) beobachten die videografierten Erklärungen der anderen. Beide Gruppen reflektieren die Erklärungen und überarbeiten auf Basis der Reflexion die eigenen Erklärungen. Das Vorgehen wird anschließend in einer zweiten Phase von beiden Gruppen analog wiederholt.
Inwiefern begünstigt die Fähigkeit zur Fremdreflexion die Selbstreflexionsfähigkeit? Welche Rolle spielen affektiv-motivationale Dispositionen der Reflektierenden? Praxisveranstaltungen wird in der Lehrkräftebildung eine bedeutende Rolle zugeschrieben. Eine mögliche Ausgestaltung sind Lehr-Lern-Labore mit iterativen Ansätzen. Studierende führen dabei an mehreren Durchführungstagen in zeitlichem Abstand außerschulischen Unterricht mit kleineren Schüler:innengruppen durch. Zwischen den einzelnen Erprobungen finden Überarbeitungen der verwendeten Materialien und Erklärungen statt. Ergebnisse aus der Forschung erlauben die Interpretation, dass für die Professionalisierung von Lehrpersonen die Qualität der ablaufenden Reflexionsprozesse bedeutsam ist. Die geplante Studie im Rahmen des Lehr-Lern-Labor-Seminars Physik an der Universität Würzburg möchte mögliche Zusammenhänge zwischen unterschiedlichen Ansätzen der Qualitätsbestimmung genauer beleuchten. Begleitend zum Lehr-Lern-Labor-Seminar mit Phasen intensiver Selbstreflexion werden die Entwicklung von Fremd- und Selbstreflexionsfähigkeit sowie die Reflexionsbereitschaft bei Studierenden erhoben und Zusammenhänge zwischen diesen untersucht.
Wahrnehmungsvignetten als Zugang zur „Reflexiven Professionalisierung“ in der Lehrkräftebildung
(2023)
Der Beitrag handelt von einer pädagogisch-phänomenologischen Zugangsweise mit Wahrnehmungsvignetten. Diese kleinen Texte beschreiben persönliche Erfahrungen in der pädagogischen Arbeit mit Kindern und Jugendlichen. In den Phasen des Reflexionsprozesses stellen wir die Bezüge zu professioneller inklusionssensibler Haltung her, geben Denkanstöße für inklusiv-partizipatives Handeln im Unterricht und in anderen pädagogischen Kontexten, verknüpfen diese Bezüge mit erlerntem Wissen, bspw. aus Seminaren zu kindlicher Entwicklung, kindlichem Lernen und diagnostischen Fragestellungen. Die Studierenden durchlaufen verschiedene Phasen der Reflexion mit unterschiedlichen Erkenntnisqualitäten, wie Erschließen oder Bewusstmachen des Inhalts bzw. der Aussage einer Wahrnehmungsvignette, Herstellen von Zusammenhängen und Bezügen zur Anthropologie und Entwicklungspsychologie, Begriffsbildung für eine pädagogische Professionalität sowie Erkennen der Angemessenheit räumlicher Strukturen und didaktischen Handelns durch Abgleich mit pädagogischen Fachkenntnissen. Die Reflexionsprozesse unterstützen die Ausbildung einer professionellen Haltung und pädagogische Handlungssensibilität.
Im BMBF-Projekt DigiLeG – digitale Lernumgebungen in der Grundschule des Zentrums für Lehrerbildung der Technischen Universität (TU) Chemnitz werden ausgehend von einem gemeinsamen Lehrkonzept in Veranstaltungen der beteiligten Fachdidaktiken gemeinsam mit Studierenden Lernumgebungen entwickelt und reflektiert, die digitale Medien lernförderlich in den Grundschulunterricht einbinden. Im folgenden Beitrag werden zunächst das Lehrkonzept und seine theoretischen Grundlagen vorgestellt. Anschließend wird die praktische Umsetzung am Beispiel der Fachdidaktik Philosophieren mit Kindern (PmK) veranschaulicht. Der Beitrag schließt mit einer Zusammenfassung der Erfahrungen in der Umsetzung des Lehrkonzepts.
Die Potenziale von standardisierten Testverfahren wie VERA werden von Lehrkräften nur selten im vollen Umfang ausgeschöpft. Vor diesem Hintergrund wurde gemeinsam mit dem Institut für Schulqualität Berlin-Brandenburg auf der Grundlage von realen VERA-Ergebnissen die „VERA-Box“ entwickelt. Die Lerngelegenheit soll Erwartungen und Werte von Lehrkräften im Umgang mit Ergebnissen standardisierter Testverfahren, deren Absicht, Unterricht zukünftig unter Bezug auf solche Testergebnisse zu entwickeln, sowie den differenziellen Nutzen dieser Rückmeldeinformationen stärken. Es wurde experimentell variiert, ob zusätzlich entweder die Aufforderung enthalten war, die Relevanz standardisierter Daten für die spätere Lehrtätigkeit zu reflektieren, oder sich mit negativen Argumentationen zu VERA auseinanderzusetzen. An drei Stichproben von insgesamt 763 Lehramtsstudierenden wurde die „VERA-Box“ über drei Semester erprobt und die Wirksamkeit evaluiert. Die Ergebnisse zeigen, dass die Intention, VERA-Rückmeldungen für die eigene Unterrichtsentwicklung zu nutzen, vom ersten zum zweiten Messzeitpunkt in allen Kohorten signifikant gestärkt wurde.
Förderung der professionellen Wahrnehmung von angehenden Mathematiklehrkräften durch Reflexion
(2023)
Sowohl Professionelle Wahrnehmung als auch Reflexionskompetenzen sind wichtige Voraussetzungen für die Professionalisierung von (angehenden) Mathematiklehrkräften. Bewährt hat sich zur Förderung der Einsatz von Videovignetten, wobei das Einnehmen einer interpretativen Grundhaltung Studierenden oft schwerfällt. Im vorgestellten Projekt sollen daher Lehramtsstudierende der Grundschule mithilfe von Videovignetten mit Reflexionsanlässen zur Perspektivenübernahme bei der Entwicklung ihrer professionellen Wahrnehmung mathematischer Denk- und Arbeitsprozesse von Kindern unterstützt werden. Methodologisch folgt das Projekt der fachdidaktischen Entwicklungsforschung. Dargestellt werden vier der zentralen Designprinzipien für die Konzeption einer entsprechenden Lernumgebung.
Wie nicht zuletzt der pandemiebedingte Distanzunterricht deutlich gemacht hat, besteht ein Bedarf an der Förderung von Medienkompetenzen bei (angehenden) Lehrkräften. Diesbezügliche Lerngelegenheiten in der Lehrkräftebildung werden als essenziell angesehen, um eine lernförderliche Anwendung digitaler Medien im Unterricht zu erlernen und dahingehende didaktische Reflexionsprozesse anzustoßen. Hieran anknüpfend wird ein Projekt vorgestellt, in dem ein Selbstlernkurs für Lehramtsstudierende zur digital gestützten Gestaltung von interaktivem Lernmaterial entwickelt und eingesetzt wird. Eingebettet in die universitäre Lehre erhalten Lehramtsstudierende Lerngelegenheiten zum Einüben mediendidaktischer Kompetenzen, indem sie eigenständig Themen als digitale Lerneinheiten aufbereiten und dazu direktes Feedback bekommen. Ziel ist es, dass die Studierenden nicht nur in der technischen Aufbereitung von Lerninhalten unterstützt werden, sondern – verknüpft mit kognitionspsychologischen Lerntheorien und didaktischen Konzepten – interaktive Lernmaterialien derart reflektieren und digital-gestützt aufbereiten können, dass sie adaptiv, motivierend und lernunterstützend eingesetzt werden können.
Sich mit dem eigenen Denken und Handeln reflexiv auseinanderzusetzen ist ein zentrales Element im Selbstreifungsprozess von Lehrkräften im Studium, über die Ausbildung bis hin zur Lehrer:innentätigkeit im Alltag. Der Workshop ermöglichte Zugänge zur selbstreflexiven Auseinandersetzung mit den eigenen Handlungsmustern mithilfe vom Autor (weiter)entwickelter Coachingtools, die im Rahmen der seminaristischen Lehrer:innenbildung in der zweiten Phase konzipiert und erprobt wurden.
Im Sinne einer „Meta-Reflexivität“ zielt dieser Beitrag darauf ab, den strukturtheoretischen und kompetenzorientierten Professionalisierungsansatz im Konstrukt der adaptiven Lehrkompetenz zusammenzuführen, was vor allem für inklusionsorientierte Ansätze vielversprechend erscheint: Anhand der Konstruktfacetten adaptiver diagnostischer, didaktischer sowie Sach- und Klassenführungskompetenz werden mögliche Herangehensweisen für eine inklusionsorientierte Lehrkräftebildung formuliert, die sowohl konkrete Kompetenzbereiche benennen als auch die Reflexion entsprechender Spannungsverhältnisse im strukturtheoretischen Sinne voraussetzen. So soll der Beitrag einen knappen theoretischen Aufriss zur Zusammenführung der unterschiedlichen Professionalisierungsansätze unter der Prämisse (mehr) Reflexion für (mehr) Inklusion leisten.
Portfolioarbeit ist ein gesetzlich verankerter Bestandteil der Lehramtsausbildung in Nordrhein-Westfalen. Über alle Praxisphasen hinweg führen Lehramtsstudierende ein Portfolio und dokumentieren darin ihren individuellen Professionalisierungsweg und reflektieren ihre Studien- und Berufswahl, ihre schulpraktischen Beobachtungen und Erfahrungen sowie ihre individuelle Kompetenzentwicklung. Der vorliegende Beitrag gibt einen Überblick über die Arbeit mit dem ePortfolio in der Lehrkräftebildung an der Universität zu Köln (UzK). Dabei werden zunächst die Potenziale von Portfolioarbeit aufgeführt und Herausforderungen herausgestellt. Im Anschluss erfolgt eine konkrete Erläuterung der Notwendigkeit einer kohärenten Einbindung des ePortfolios in die Seminararbeit und eine kurze Darstellung der Weiterentwicklung im Rahmen des Verbundprojekts ePort.nrw.
Die Fachausbildung des Vorbereitungsdiensts im Land Brandenburg bietet Lehramtskandidat:innen (LAK) gemeinsame Fachgruppenarbeit, individuelle Fachkonsultationen sowie Hospitationen als unterstützende Angebote im Entwicklungsprozess. Um diesen Professionalisierungsprozess sichtbar zu machen und Zielperspektiven entwickeln und verfolgen zu können, wurden aus einem Spinnennetzdiagramm zwei Praxistools zur Reflexion und Diagnose entwickelt.
(1) Reflexionstool: Die Übertragung eines tabellarischen Kompetenzprofils (Arnold & Iffert nach MBJS [Ministerium für Bildung, Jugend und Sport des Landes Brandenburg], 2014) in das Spinnennetzdiagramm bietet den LAK niederschwellige Gelegenheit der kontinuierlichen, prozessbegleitenden Selbstreflexion. Die Selbstwahrnehmung von positiven Entwicklungen kann zur Stärkung der Selbstwirksamkeit führen, schafft gleichzeitig jedoch eine Bewusstmachung für einzelne Herausforderungen. Die Abbildung individueller Entwicklungsaufgaben und Professionalisierungsbedarfe ermöglicht eine bedarfsorientierte Gestaltung der Fachgruppenarbeit.
(2) Diagnosetool: Analog wird Fachausbilder:innen durch die Übertragung der Beobachtungskriterien des MBJS (2014) in das Diagramm eine übersichtliche Bestandsaufnahme einzelner Unterrichtssituationen zur Diagnose von Grundkoordinaten des Unterrichts transparent. Auf diese Weise können Fachausbilder:innen mögliche blinde Flecken identifizieren und Feedback zur Auswahl von Beobachtungskriterien geben. Darüber hinaus ergeben sich Aspekte zur Gestaltung von Fachkonsultationen sowie Diskussionsgrundlagen für Gruppenhospitationen.
Menschen mit Aphasie erleben erhebliche Einbußen in sozialer Teilhabe und Lebensqualität. Peer-to-Peer-Unterstützung durch Selbsthilfeangebote oder Peer-Befriending-Maßnahmen kann sich positiv auf Partizipation und psychisches Wohlbefinden auswirken. Mit dem Projekt shalk konnte gezeigt werden, dass von Betroffenen geleitete Selbsthilfegruppen maßgeblich zu Selbstwerterleben und verbesserter Lebensqualität der Leitungspersonen und der Gruppenteilnehmenden beitragen können. Um einen Austausch zwischen Betroffenen auch jenseits des Gruppensettings zu ermöglichen, können digitale Medien genutzt werden. Im Projekt PeerPAL wird ein für Menschen mit Aphasie angepasstes digitales soziales Netzwerk (Smartphone-App) zur virtuellen Vernetzung und persönlichen Begegnung entwickelt und evaluiert. Erste Daten weisen darauf hin, dass die Betroffenen die App nutzen können und mit Design und Funktionen zufrieden sind. Auswirkungen auf die Lebensqualität werden aktuell untersucht. Sprachtherapeut:innen nehmen in der Peer-to-Peer-Unterstützung insofern eine zentrale Rolle ein, als dass sie Betroffene in entsprechende Angebote einführen und sie mittels abgestufter Begleitung an die eigenständige Nutzung heranführen.
Diversity is a term that is broadly used and challenging for informatics research, development and education. Diversity concerns may relate to unequal participation, knowledge and methodology, curricula, institutional planning etc. For a lot of these areas, measures, guidelines and best practices on diversity awareness exist. A systemic, sustainable impact of diversity measures on informatics is still largely missing. In this paper I explore what working with diversity and gender concepts in informatics entails, what the main challenges are and provide thoughts for improvement. The paper includes definitions of diversity and intersectionality, reflections on the disciplinary basis of informatics and practical implications of integrating diversity in informatics research and development. In the final part, two concepts from the social sciences and the humanities, the notion of “third space”/hybridity and the notion of “feminist ethics of care”, serve as a lens to foster more sustainable ways of working with diversity in informatics.
Informatikstudiengänge verzeichnen hohe Abbruchquoten innerhalb der ersten beiden Semester, die häufig mit Leistungsdefiziten oder Motivationsproblemen begründet werden. Eine Ursache dafür, dass trotz intensiver Bemühungen um bessere Lehre und motivationsfördernde Maßnahmen diese Situation imWesentlichen unverändert bleibt, könnte darin liegen, dass nicht die eine Maßnahme oder der eine Ansatz das Problem im Ganzen lösen kann, sondern dass eine heterogene Studierendenschaft vielmehr nach unterschiedlichen Maßnahmen verlangt. Bisher findet sich wenig Forschung zu differenzierten Studierendentypen in der Informatik. Wir stellen in dieser Arbeit einen Ansatz dafür vor, die Heterogenität der Informatikstudierenden zu ergründen, und beschreiben die Ergebnisse erster Versuche mit diesem Ansatz. Um die große Anzahl von Studierenden auf eine überschaubare Anzahl von Typen mit jeweils ähnlichen Bedürfnissen und Erwartungen zu reduzieren, wird dazu die im Produktmanagement bewährte Personas-Methode adaptiert. Im Rahmen einer Befragung von 170 Informatikstudierenden konnten hierzu bereits einige Personas mit unterschiedlichen Merkmalshäufungen ausgearbeitet werden, die eine gute Grundlage darstellen, um auf dieser Basis differenzierte Interventionen zur Förderung und Motivation der Informatikstudierenden zu entwickeln.
Forschendes Lernen ist eine Lehr-Lernform, in der Studierende einen eigenen Forschungsprozess vollständig durchlaufen. In Informatikstudiengängen und insbesondere in Informatikbachelorstudiengängen ist die Forschungsorientierung allerdings nur gering ausgeprägt: Forschendes Lernen wird kaum eingesetzt, obwohl dies möglich und sinnvoll ist. Dieser Artikel stellt ein Konzept für ein Seminar Software Engineering im Bachelorstudium vor und beschreibt dessen Durchführung. Abschließend wird das Konzept diskutiert und sowohl aus Studierenden- als auch aus Lehrendensicht positiv evaluiert.
Die alleinige Ursache von Stottern ist weiterhin nicht abschließend geklärt. Auf neurofunktioneller und -morphologischer Ebene zeigen stotternde Personen Abweichungen in den Arealen, welche nicht nur für die Initiierung von sprechmotorischen Programmen, sondern auch für die Produktion und Perzeption von musikalischen Rhythmen zuständig sind. Unterschiede zu flüssigsprechenden Personen treten jedoch nicht nur im verbalen, sondern auch im nonverbal sensomotorischen Bereich auf, was auf eine Störung domänenübergreifender auditiv-motorischer Koordinationsprozesse hindeutet. Ausgehend davon wurde in einigen Studien postuliert, dass dem Störungsbild Stottern ein domänenübergreifendes Rhythmusdefizit zugrunde liegt. Im Gegensatz zu anderen Störungsbildern, welche auch Probleme in rhythmischen Aufgaben aufweisen, gibt es bis dato jedoch keine Intervention, welche dieses Defizit angeht. Es soll untersucht werden, ob ein nonverbales rhythmisches Training bei stotternden Kindern im Alter von zehn bis zwölf Jahren eine Verbesserung der sensomotorischen Synchronisationsfähigkeiten zur Folge hat. Zudem soll erforscht werden, ob es Transfereffekte auf die Sprechmotorik und Sprechflüssigkeit gibt. Für die vorliegende einfach verblindete Pilotstudie sollen 20 Kinder rekrutiert werden. Zehn davon werden randomisiert der Experimentalgruppe zugewiesen, welche das rhythmische Spiel Rhythm Workers über drei Wochen daheim auf einem Tablet spielen sollen. Die Kontrollgruppe spielt ein nicht-rhythmisches Bubble-Shooter-Spiel namens Frozen Bubble. Diese Studie könnte somit den Weg ebnen für technologieunterstützte Rehabilitationsmaßnahmen, welche darauf abzielen die rhythmisch-motorischen Defizite bei Stottern zu lindern.
Der Sachverständigenrat zur Begutachtung der Entwicklung im Gesundheitswesen forderte bereits 2007 eine verbesserte Zusammenarbeit der Gesundheitsberufe und beschreibt in seinem Gutachten „Kooperation und Verantwortung als Voraussetzung einer zielorientierten Gesundheitsversorgung“ (S. 25). Mit der vorgestellten Arbeit wird untersucht, welche Modelle der berufsübergreifenden Kooperation in der ambulanten sprachtherapeutischen Praxis Anwendung finden und wie diese Kooperationen von Sprachtherapeut*innen bewertet werden. Zu diesem Zweck wurde ein Online-Fragebogen konzipiert. Anschließend wurden die Antworten von insgesamt 30 teilnehmenden Sprachtherapeut*innen ausgewertet. Dabei wurde deutlich, dass die viel diskutierte und häufig geforderte interprofessionelle Zusammenarbeit in der Praxis nur selten zu finden ist. Vielmehr arbeiten die befragten Sprachtherapeut*innen nach multiprofessionellen Modellen. Es fehlen berufsübergreifende Besprechungen, und der fachliche Austausch ist noch viel zu oft dem Engagement einzelner Personen überlassen. Auch die Bewertung der Kooperationen zeigt Verbesserungspotenzial: Die Befragten bewerteten die Zusammenarbeit mit angrenzenden Berufsgruppen durchschnittlich als „befriedigend“.