Institut für Physik und Astronomie
Refine
Has Fulltext
- yes (124)
Year of publication
Document Type
- Article (75)
- Preprint (20)
- Postprint (11)
- Conference Proceeding (9)
- Doctoral Thesis (8)
- Master's Thesis (1)
Is part of the Bibliography
- no (124) (remove)
Keywords
- Löschkurve (2)
- Resonanzenergietransfer (2)
- Theorie von Förster (2)
- Wechselwirkungsabstand (2)
- interaction distance (2)
- quenching curve (2)
- resonant energy transfer (2)
- statistical models (2)
- statistische Modelle (2)
- theory of Förster (2)
As part of our ongoing Wolf-Rayet (WR) Magellanic Cloud survey, we have discovered 13 new WRs. However, the most exciting outcome of our survey is not the number of new WRs, but their unique characteristics. Eight of our discoveries appear to belong to an entirely new class of WRs. While one might naively classify these stars as WN3+O3V binaries, such a pairing is unlikely. Preliminary CMFGN modeling suggests physical parameters similar to early-type WNs in the Large Magellanic Cloud except with mass-loss rates three to five times lower and slightly higher temperatures. The evolution status of these stars remains an open question.
Before GAIA improves the HIPPARCOS survey, direct determination of the distance via parallax is only possible for γ Vel, but the analysis of the cluster or association to which WR stars are associated can give distances with a 50% to a 10% accuracy. The list of Galactic clusters, associations and clusters/association candidates has grown significantly in the last decade with the numerous deep, high resolution surveys of the Milky Way. In this work, we revisit the fundamental parameters of known clusters with WR stars, and we present the search for new ones. All our work is based on the catalogs from the VVV (from the VISTA telescope) and the UKIDS (from the UKIRT telescope) near infrared surveys. Finally, the relations between the fundamental parameters of clusters with WR stars are explored.
Because most massive stars have been or will be affected by a companion during the course of their evolution, we cannot afford to neglect binaries when discussing the progenitors of supernovae and GRBs. Analyzing linear polarization in the emission lines of close binary systems allows us to probe the structures of these systems' winds and mass flows, making it possible to map the complex morphologies of the mass loss and mass transfer structures that shape their subsequent evolution. In Wolf-Rayet (WR) binaries, line polarization variations with orbital phase distinguish polarimetric signatures arising from lines that scatter near the stars from those that scatter far from the orbital plane. These far-scattering lines may form the basis for a "binary line-effect method" of identifying rapidly rotating WR stars (and hence GRB progenitor candidates) in binary systems.
Professional and amateur astronomers around the world contributed to a 4-month long campaign in 2013, mainly in spectroscopy but also in photometry, interferometry and polarimetry, to observe the first 3 Wolf-Rayet stars discovered: WR 134 (WN6b), WR 135 (WC8) and WR 137 (WC7pd+O9). Each of these stars are interesting in their own way, showing a variety of stellar wind structures. The spectroscopic data from this campaign were reduced and analyzed for WR 134 in order to better understand its behavior and long-term periodicity in the context of CIRs in the wind. We will be presenting the results of these spectroscopic data, which include the confirmation of the CIR variability and a time-coherency of ∼ 40 days (half-life of ∼ 20 days).
For some years now, spectroscopic measurements of massive stars in the amateur domain have been fulfilling professional requirements. Various groups in the northern and southern hemispheres have been established, running successful professional-amateur (ProAm) collaborative campaigns, e.g., on WR, O and B type stars. Today high quality data (echelle and long-slit) are regularly delivered and corresponding results published. Night-to-night long-term observations over months to years open a new opportunity for massive-star research. We introduce recent and ongoing sample campaigns (e.g. ∊ Aur, WR 134, ζ Pup), show respective results and highlight the vast amount of data collected in various data bases. Ultimately it is in the time-dependent domain where amateurs can shine most.
We highlight the basic physics that allows fundamental parameters, such as the effective
temperature, luminosity, abundances, and mass-loss rate, of Wolf-Rayet (W-R) stars to be
determined. Since the temperature deduced from the spectrum of a W-R star is an ionization
temperature, a detailed discussion of the ionization structure of W-R winds, and how it is set, is given. We also provide an overview of line and continuum formation in W-R stars. Mechanisms that contribute to the strength of different emission lines, such as collisional excitation, radiative recombination, dielectronic recombination, and continuum uorescence, are discussed.
The main objective of this work is to investigate the evolution of massive stars, and the interplay between them and the ionized gas for a sample of local metal-poor Wolf-Rayet galaxies.
Optical integral field spectrocopy was used in combination with multi-wavelength radio data.
Combining optical and radio data, we locate Wolf-Rayet stars and supernova remnants across the Wolf-Rayet galaxies to study the spatial correlation between them. This study will shed light on the massive star formation and its feedback, and will help us to better understand
distant star-forming galaxies.
PopIII-star siblings in IZw18 and metal-poor WR galaxies unveiled from integral field spectroscopy
(2015)
Here, we highlight our recent results from the IFS study of Mrk178, the closest metal-poor WR galaxy, and of IZw18, the most metal-poor star-forming galaxy known in the local Universe. The IFS data of Mrk178 show the importance of aperture effects on the search for WR features, and the extent to which physical variations in the ISM properties can be detected. Our IFS data of IZw18 reveal its entire nebular HeIIλ4686-emitting region, and indicate for the very first time that peculiar, hot (nearly) metal-free ionizing stars (called here PopIII-star siblings) might hold the key to the HeII-ionization in IZw18.
The evolution of massive stars in very low metallicity galaxies is less well observationally
constrained than in environments more similar to the Milky Way, M33, or the LMC. We discuss
in this contribution the current state of our program to search for and characterize Wolf-Rayet stars (and other massive emission line stars) in low metallicity galaxies in the Local Volume.
Obtaining a complete census of massive, evolved stars in a galaxy would be a key ingredient for testing stellar evolution models. However, as the evolution of stars is also strongly dependent on their metallicity, it is inevitable to have this kind of data for a variety of galaxies with different metallicities. Between 2009 and 2011, we conducted the Magellanic Clouds Massive Stars and Feedback Survey (MSCF); a spatially complete, multi-epoch, broad- and narrow-band optical imaging survey of the Large and Small Magellanic Clouds. With the inclusion of shallow images, we are able to give a complete photometric catalog of stars between B ≈ 18 and B ≈ 19 mag.
These observations were augmented with additional photometric data of similar spatial res-
olution from UV to IR (e.g. from GALEX, 2MASS and Spitzer) in order to sample a large portion of the spectral energy distribution of the brightest stars (B < 16 mag) in the Magel- lanic Clouds. Using these data, were are able to train a machine learning algorithm that gives us a good estimate of the spectral type of tens of thousands of stars.
This method can be applied to the search for Wolf-Rayet-Stars to obtain a sample of candi- dates for follow-up observations. As this approach can, in principle, be adopted for any resolved galaxy as long as sufficient photometric data is available, it can form an effective alternative method to the classical strategies (e.g. He II filter imaging).
Detection and Characterization of Wolf-Rayet stars in M81 with GTC/OSIRIS spectra and HST images
(2015)
Here we investigate a sample of young star clusters (YSCs) and other regions of recent star formation with Wolf-Rayet (W-R) features detected in the relatively nearby spiral galaxy M81 by analysing long-slit (LS) and Multi-Object Spectroscopy (MOS) spectra obtained with the OSIRIS instrument at the 10.4-m Gran Telescopio Canarias (GTC). We take advantage of the synergy between GTC spectra and Hubble Space Telescope (HST) images to also reveal their spatial localization and the environments hosting these stars. We finally discuss and comment on the next steps of our study.
We summarize past and current surveys for WRs among the Local Group galaxies, empha- sizing both the why and how. Such studies are invaluable for helping us learn about massive star evolution, and for providing sensitive tests of the stellar evolution models. But for such surveys to be useful, the completeness limits must be well understood. We illustrate that point by following the “evolution” of the observed WC/WN ratio in nearby galaxies. We end by examining our new survey for WR stars in the Magellanic Clouds, which has revealed a new type of WN star, never before seen.
In this contribution we present some preliminary results obtained from a SOAR-Goodman optical spectroscopic survey aimed to confirm the OIf* - OIf*/WN nature of a sample of Galactic candidates that were previously confirmed as massive stars based on near-infrared spectra taken with OSIRIS at SOAR. With only a few of such stars known in the Galaxy to date, our study significantly contributes to improve the number of known Galactic O2If* stars, as well as almost doubling the number of known members of the galactic sample of the rare type OIf*/WN.
The total population of Wolf-Rayet (WR) stars in the Galaxy is predicted by models to be as many as ~6000 stars, and yet the number of catalogued WR stars as a result of optical surveys was far lower than this (~200) at the turn of this century. When beginning our WR searches using infrared techniques it was not clear whether WR number predictions were too optimistic or whether there was more hidden behind interstellar and circumstellar extinction. During the last decade we pioneered a technique of exploiting the near- and mid-infrared continuum colours for individual point sources provided by large-format surveys of the Galaxy, including 2MASS and Spitzer/GLIMPSE, to pierce through the dust and reveal newly discovered WR stars throughout the Galactic Plane. The key item to the colour discrimination is via the characteristic infrared spectral index produced by the strong winds of the WR stars, combined with dust extinction, which place WR stars in a relatively depopulated area of infrared colour-colour diagrams. The use of the Spitzer/GLIMPSE 8µm and, more recently, WISE 22µm fluxes together with cross-referencing with X-ray measurements in selected Galactic regions have enabled improved candidate lists that increased our confirmation success rate, achieved via follow-up infrared and optical spectroscopy. To date a total of 102 new WR stars have been found with many more
candidates still available for follow-up. This constitutes an addition of ~16% to the current
inventory of 642 Galactic WR stars. In this talk we review our methods and provide some
new results and a preliminary review of their stellar and interstellar medium environments. We provide a roadmap for the future of this search, including statistical modeling, and what we can add to star formation and high mass star evolution studies.
Although we all use the name Wolf-Rayet to refer to specific groups of stars, “Wolf-Rayet” per se is really an astrophysical phenomenon of fast-moving, hot plasma, normally expanding around a hot star. However, expediency demands that we follow established traditions by referring to three specific kinds of WR stars: (1) cWR, “classical” He-burning descendants of massive, O-type stars, presumably all of which pass through a WR stage; (2) WNh, the most massive and luminous hydrogen-rich main-sequence stars with strong winds; and (3) [WR], the central stars of some 15 % of Planetary Nebulae. Wolf-Rayet stars are the epitome of relatively stable stars with the highest mass-loss rates for their kind. It behooves us to understand the what, how and why of this circumstance, along with its manyfold and fascinating consequences.
An overview of the known Wolf-Rayet (WR) population of the Milky Way is presented, including a brief overview of historical catalogues and recent advances based on infrared photometric and spectroscopic observations resulting in the current census of 642 (vl.13 online catalogue). The observed distribution of WR stars is considered with respect to known star clusters, given that ≤20% of WR stars in the disk are located in clusters. WN stars outnumber WC stars at all galactocentric radii, while early-type WC stars are strongly biased against the inner Milky Way. Finally, recent estimates of the global WR population in the Milky Way are reassessed, with 1,200±100 estimated, such that the current census may be 50% complete. A characteristic WR lifetime of 0.25 Myr is inferred for an initial mass threshold of 25 M⊙.
When azobenzene-modified photosensitive polymer films are irradiated with light interference patterns, topographic variations in the film develop that follow the electric field vector distribution resulting in the formation of surface relief grating (SRG). The exact correspondence of the electric field vector orientation in interference pattern in relation to the presence of local topographic minima or maxima of SRG is in general difficult to determine. In my thesis, we have established a systematic procedure to accomplish the correlation between different interference patterns and the topography of SRG. For this, we devise a new setup combining an atomic force microscope and a two-beam interferometer (IIAFM). With this set-up, it is possible to track the topography change in-situ, while at the same time changing polarization and phase of the impinging interference pattern. To validate our results, we have compared two photosensitive materials named in short as PAZO and trimer. This is the first time that an absolute correspondence between the local distribution of electric field vectors of interference pattern and the local topography of the relief grating could be established exhaustively. In addition, using our IIAFM we found that for a certain polarization combination of two orthogonally polarized interfering beams namely SP (↕, ↔) interference pattern, the topography forms SRG with only half the period of the interference patterns. Exploiting this phenomenon we are able to fabricate surface relief structures below diffraction limit with characteristic features measuring only 140 nm, by using far field optics with a wavelength of 491 nm. We have also probed for the stresses induced during the polymer mass transport by placing an ultra-thin gold film on top (5–30 nm). During irradiation, the metal film not only deforms along with the SRG formation, but ruptures in regular and complex manner. The morphology of the cracks differs strongly depending on the electric field distribution in the interference pattern even when the magnitude and the kinetic of the strain are kept constant. This implies a complex local distribution of the opto-mechanical stress along the topography grating. The neutron reflectivity measurements of the metal/polymer interface indicate the penetration of metal layer within the polymer resulting in the formation of bonding layer that confirms the transduction of light induced stresses in the polymer layer to a metal film.
LCST-type synthetic thermoresponsive polymers can reversibly respond to certain stimuli in aqueous media with a massive change of their physical state. When fluorophores, that are sensitive to such changes, are incorporated into the polymeric structure, the response can be translated into a fluorescence signal. Based on this idea, this thesis presents sensing schemes which transduce the stimuli-induced variations in the solubility of polymer chains with covalently-bound fluorophores into a well-detectable fluorescence output. Benefiting from the principles of different photophysical phenomena, i.e. of fluorescence resonance energy transfer and solvatochromism, such fluorescent copolymers enabled monitoring of stimuli such as the solution temperature and ionic strength, but also of association/disassociation mechanisms with other macromolecules or of biochemical binding events through remarkable changes in their fluorescence properties. For instance, an aqueous ratiometric dual sensor for temperature and salts was developed, relying on the delicate supramolecular assembly of a thermoresponsive copolymer with a thiophene-based conjugated polyelectrolyte. Alternatively, by taking advantage of the sensitivity of solvatochromic fluorophores, an increase in solution temperature or the presence of analytes was signaled as an enhancement of the fluorescence intensity. A simultaneous use of the sensitivity of chains towards the temperature and a specific antibody allowed monitoring of more complex phenomena such as competitive binding of analytes. The use of different thermoresponsive polymers, namely poly(N-isopropylacrylamide) and poly(meth)acrylates bearing oligo(ethylene glycol) side chains, revealed that the responsive polymers differed widely in their ability to perform a particular sensing function. In order to address questions regarding the impact of the chemical structure of the host polymer on the sensing performance, the macromolecular assembly behavior below and above the phase transition temperature was evaluated by a combination of fluorescence and light scattering methods. It was found that although the temperature-triggered changes in the macroscopic absorption characteristics were similar for these polymers, properties such as the degree of hydration or the extent of interchain aggregations differed substantially. Therefore, in addition to the demonstration of strategies for fluorescence-based sensing with thermoresponsive polymers, this work highlights the role of the chemical structure of the two popular thermoresponsive polymers on the fluorescence response. The results are fundamentally important for the rational choice of polymeric materials for a specific sensing strategy.
Passive plant actuators have fascinated many researchers in the field of botany and structural biology since at least one century. Up to date, the most investigated tissue types in plant and artificial passive actuators are fibre-reinforced composites (and multilayered assemblies thereof) where stiff, almost inextensible cellulose microfibrils direct the otherwise isotropic swelling of a matrix. In addition, Nature provides examples of actuating systems based on lignified, low-swelling, cellular solids enclosing a high-swelling cellulosic phase. This is the case of the Delosperma nakurense seed capsule, in which a specialized tissue promotes the reversible opening of the capsule upon wetting. This tissue has a diamond-shaped honeycomb microstructure characterized by high geometrical anisotropy: when the cellulosic phase swells inside this constraining structure, the tissue deforms up to four times in one principal direction while maintaining its original dimension in the other. Inspired by the example of the Delosoperma nakurense, in this thesis we analyze the role of architecture of 2D cellular solids as models for natural hygromorphs. To start off, we consider a simple fluid pressure acting in the cells and try to assess the influence of several architectural parameters onto their mechanical actuation. Since internal pressurization is a configurational type of load (that is the load direction is not fixed but it “follows” the structure as it deforms) it will result in the cellular structure acquiring a “spontaneous” shape. This shape is independent of the load but just depends on the architectural characteristics of the cells making up the structure itself. Whereas regular convex tiled cellular solids (such as hexagonal, triangular or square lattices) deform isotropically upon pressurization, we show through finite element simulations that by introducing anisotropic and non-convex, reentrant tiling large expansions can be achieved in each individual cell. The influence of geometrical anisotropy onto the expansion behaviour of a diamond shaped honeycomb is assessed by FEM calculations and a Born lattice approximation. We found that anisotropic expansions (eigenstrains) comparable to those observed in the keels tissue of the Delosoperma nakurense are possible. In particular these depend on the relative contributions of bending and stretching of the beams building up the honeycomb. Moreover, by varying the walls’ Young modulus E and internal pressure p we found that both the eigenstrains and 2D elastic moduli scale with the ratio p/E. Therefore the potential of these pressurized structures as soft actuators is outlined. This approach was extended by considering several 2D cellular solids based on two types of non-convex cells. Each honeycomb is build as a lattice made of only one non-convex cell. Compared to usual honeycombs, these lattices have kinked walls between neighbouring cells which offers a hidden length scale allowing large directed deformations. By comparing the area expansion in all lattices, we were able to show that less convex cells are prone to achieve larger area expansions, but the direction in which the material expands is variable and depends on the local cell’s connectivity. This has repercussions both at the macroscopic (lattice level) and microscopic (cells level) scales. At the macroscopic scale, these non-convex lattices can experience large anisotropic (similarly to the diamond shaped honeycomb) or perfectly isotropic principal expansions, large shearing deformations or a mixed behaviour. Moreover, lattices that at the macroscopic scale expand similarly can show quite different microscopic deformation patterns that include zig-zag motions and radical changes of the initial cell shape. Depending on the lattice architecture, the microscopic deformations of the individual cells can be equal or not, so that they can build up or mutually compensate and hence give rise to the aforementioned variety of macroscopic behaviours. Interestingly, simple geometrical arguments involving the undeformed cell shape and its local connectivity enable to predict the results of the FE simulations. Motivated by the results of the simulations, we also created experimental 3D printed models of such actuating structures. When swollen, the models undergo substantial deformation with deformation patterns qualitatively following those predicted by the simulations. This work highlights how the internal architecture of a swellable cellular solid can lead to complex shape changes which may be useful in the fields of soft robotics or morphing structures.
Today, it is well known that galaxies like the Milky Way consist not only of stars but also of gas and dust. The galactic halo, a sphere of gas that surrounds the stellar disk of a galaxy, is especially interesting. It provides a wealth of information about in and outflowing gaseous material towards and away from galaxies and their hierarchical evolution. For the Milky Way, the so-called high-velocity clouds (HVCs), fast moving neutral gas complexes in the halo that can be traced by absorption-line measurements, are believed to play a crucial role in the overall matter cycle in our Galaxy. Over the last decades, the properties of these halo structures and their connection to the local circumgalactic and intergalactic medium (CGM and IGM, respectively) have been investigated in great detail by many different groups. So far it remains unclear, however, to what extent the results of these studies can be transferred to other galaxies in the local Universe. In this thesis, we study the absorption properties of Galactic HVCs and compare the HVC absorption characteristics with those of intervening QSO absorption-line systems at low redshift. The goal of this project is to improve our understanding of the spatial extent and physical conditions of gaseous galaxy halos in the local Universe. In the first part of the thesis we use HST /STIS ultraviolet spectra of more than 40 extragalactic background sources to statistically analyze the absorption properties of the HVCs in the Galactic halo. We determine fundamental absorption line parameters including covering fractions of different weakly/intermediately/highly ionized metals with a particular focus on SiII and MgII. Due to the similarity in the ionization properties of SiII and MgII, we are able to estimate the contribution of HVC-like halo structures to the cross section of intervening strong MgII absorbers at z = 0. Our study implies that only the most massive HVCs would be regarded as strong MgII absorbers, if the Milky Way halo would be seen as a QSO absorption line system from an exterior vantage point. Combining the observed absorption-cross section of Galactic HVCs with the well-known number density of intervening strong MgII absorbers at z = 0, we conclude that the contribution of infalling gas clouds (i.e., HVC analogs) in the halos of Milky Way-type galaxies to the cross section of strong MgII absorbers is 34%. This result indicates that only about one third of the strong MgII absorption can be associated with HVC analogs around other galaxies, while the majority of the strong MgII systems possibly is related to galaxy outflows and winds. The second part of this thesis focuses on the properties of intervening metal absorbers at low redshift. The analysis of the frequency and physical conditions of intervening metal systems in QSO spectra and their relation to nearby galaxies offers new insights into the typical conditions of gaseous galaxy halos. One major aspect in our study was to regard intervening metal systems as possible HVC analogs. We perform a detailed analysis of absorption line properties and line statistics for 57 metal absorbers along 78 QSO sightlines using newly-obtained ultraviolet spectra obtained with HST /COS. We find clear evidence for bimodal distribution in the HI column density in the absorbers, a trend that we interpret as sign for two different classes of absorption systems (with HVC analogs at the high-column density end). With the help of the strong transitions of SiII λ1260, SiIII λ1206, and CIII λ977 we have set up Cloudy photoionization models to estimate the local ionization conditions, gas densities, and metallicities. We find that the intervening absorption systems studied by us have, on average, similar physical conditions as Galactic HVC absorbers, providing evidence that many of them represent HVC analogs in the vicinity of other galaxies. We therefore determine typical halo sizes for SiII, SiIII, and CIII for L = 0.01L∗ and L = 0.05L∗ galaxies. Based on the covering fractions of the different ions in the Galactic halo, we find that, for example, the typical halo size for SiIII is ∼ 160 kpc for L = 0.05L∗ galaxies. We test the plausibility of this result by searching for known galaxies close to the QSO sightlines and at similar redshifts as the absorbers. We find that more than 34% of the measured SiIII absorbers have galaxies associated with them, with the majority of the absorbers indeed being at impact parameters ρ ≤160 kpc.