Institut für Physik und Astronomie
Refine
Has Fulltext
- no (98)
Year of publication
Document Type
- Article (96)
- Monograph/Edited Volume (2)
Is part of the Bibliography
- yes (98)
Institute
The formation of a Langmuir monolayer of an amphiphilic derivative of zinc phthalocyanine (Na[(ZnPcSO3)-S-t]) has been studied by means of surface potential technique and Brewster angle microscopy. The experiments were undertaken in order to understand the behaviour of this monolayer with a well-defined surface pressure isotherm. The floating film is described as a truly monomolecular layer formed by very rigid islands in which the phthalocyanine units tend to take on a preferential orientation with their planes perpendicular to the air-water interface, for high values of the surface pressure. (c) 2004 Elsevier B.V. All rights reserved
Surface light emitting diodes SLEDs , in which previously microfabricated electrodes were coated with a conjugated polymer, were made with greatly different electrode spacings 250 nm and 10 or 20 mm and with different electrode material combinations. The fabrication process allowed us to compare several electrode materials. The SLED structures also enabled imaging of the light emission zone with fluorescence video microscopy. Conventional sandwich structures were also made for comparison electrode separation 50 nm. In this study, the emitting layer was poly[3- (2',5'-bis(1'',4'',7''trioxaoctyl)phenyl)-2,2'-bithiophene] (EO-PT), a conjugated polymer based on polythiophene with oligo ethyleneoxide side chains. The current-voltage (I(V)) and light-voltage (L(V)) characteristics of the SLEDs were largely insensitive to electrode separation except at high voltages, at which the current in the devices with the largest separations was limited. Sandwich structures had the same light output at a given current. Light could be obtained in forward and reverse bias from indium tin oxide ITO -aluminum, gold silicide-aluminum, and gold silicide-gold SLEDs, but the turn-on voltages were lowest with the ITO-aluminum devices, and these were also the brightest and most reliable. Adding salt to the EO-PT increased the current and brightness, decreased the turn-on voltages, and made the I(V) characteristics symmetric; thus, a device with an electrode separation of 10 mm had the extraordinarily low turn-on voltage of 6 V. The location of the light emission was at the electron-injecting contact.
The structure of mono- and multilayers of amphiphilic disc-shaped pentaynes wa inbestigated by Brewsterangle microscopy, X-ray specular reflection and grazing incidence diffraction (GID). X-ray specular reflection experiments confirm the "edge on" arrangement of the molecular discs. The molecular modelling of the Langmuir-Blodgett (LB)- multilayers predicts a columnar in-plane packing of the molecules. A GID experiment with monochromatic synchrotron radiation was used to verify the predicted multilayer structure on molecular level, while the Brewsterangle microscopy gave a deeper insight in the monolayer in-plane structure on micron scale.
Changes of the molecular arrangenemt that can be induced by means of the LB technique in the multilayers of a disc-shaped multialkynyl amphiphile are monitored by means of small angle X-ray diffraction. Studies of the monolayers at the air-water interface reveal "edge-on" orientation of the discs. Specific effects of the counter- ions (Na+, Cd²+, Pb²+, and Ba²+) and sub-solution pH on the monolayer collapse pressure, transfer efficiency and molecular order in the multilayers are found. A correlation between the monolayer properties and the ability for formation of periodic discotic structures in the presence of divalent counterions is established. The discotic molecules retain their "edge-on" arrangement in the highly compressed transferred films with slight irregular interdigtation of the flexible wings and inclination to the substrate normal. The tilt and the inter- digitation are reduced when the discotic monolayers are deposited in alternating LB films with barium arachidate spacer layers.