Institut für Physik und Astronomie
Refine
Has Fulltext
- yes (5) (remove)
Document Type
- Doctoral Thesis (3)
- Postprint (2)
Is part of the Bibliography
- yes (5) (remove)
Keywords
- azobenzene (5) (remove)
Institute
Photo-Isomerization Kinetics of Azobenzene Containing Surfactant Conjugated with Polyelectrolyte
(2020)
Ionic complexation of azobenzene-containing surfactants with any type of oppositely charged soft objects allows for making them photo-responsive in terms of their size, shape and surface energy. Investigation of the photo-isomerization kinetic and isomer composition at a photo-stationary state of the photo-sensitive surfactant conjugated with charged objects is a necessary prerequisite for understanding the structural response of photo-sensitive complexes. Here, we report on photo-isomerization kinetics of a photo-sensitive surfactant in the presence of poly(acrylic acid, sodium salt). We show that the photo-isomerization of the azobenzene-containing cationic surfactant is slower in a polymer complex compared to being purely dissolved in aqueous solution. In a photo-stationary state, the ratio between the trans and cis isomers is shifted to a higher trans-isomer concentration for all irradiation wavelengths. This is explained by the formation of surfactant aggregates near the polyelectrolyte chains at concentrations much lower than the bulk critical micelle concentration and inhibition of the photo-isomerization kinetics due to steric hindrance within the densely packed aggregates.
The goal of the presented work is to explore the interaction between gold nanorods (GNRs) and hyper-sound waves. For the generation of the hyper-sound I have used Azobenzene-containing polymer transducers. Multilayer polymer structures with well-defined thicknesses and smooth interfaces were built via layer-by-layer deposition. Anionic polyelectrolytes with Azobenzene side groups (PAzo) were alternated with cationic polymer PAH, for the creation of transducer films. PSS/PAH multilayer were built for spacer layers, which do not absorb in the visible light range. The properties of the PAzo/PAH film as a transducer are carefully characterized by static and transient optical spectroscopy. The optical and mechanical properties of the transducer are studied on the picosecond time scale. In particular the relative change of the refractive index of the photo-excited and expanded PAH/PAzo is Δn/n = - 2.6*10‐4. Calibration of the generated strain is performed by ultrafast X-ray diffraction calibrated the strain in a Mica substrate, into which the hyper-sound is transduced. By simulating the X-ray data with a linear-chain-model the strain in the transducer under the excitation is derived to be Δd/d ~ 5*10‐4.
Additional to the investigation of the properties of the transducer itself, I have performed a series of experiments to study the penetration of the generated strain into various adjacent materials. By depositing the PAzo/PAH film onto a PAH/PSS structure with gold nanorods incorporated in it, I have shown that nanoscale impurities can be detected via the scattering of hyper-sound.
Prior to the investigation of complex structures containing GNRs and the transducer, I have performed several sets of experiments on GNRs deposited on a small buffer of PSS/PAH. The static and transient response of GNRs is investigated for different fluence of the pump beam and for different dielectric environments (GNRs covered by PSS/PAH).
A systematic analysis of sample architectures is performed in order to construct a sample with the desired effect of GNRs responding to the hyper-sound strain wave. The observed shift of a feature related to the longitudinal plasmon resonance in the transient reflection spectra is interpreted as the event of GNRs sensing the strain wave. We argue that the shift of the longitudinal plasmon resonance is caused by the viscoelastic deformation of the polymer around the nanoparticle. The deformation is induced by the out of plane difference in strain in the area directly under a particle and next to it. Simulations based on the linear chain model support this assumption. Experimentally this assumption is proven by investigating the same structure, with GNRs embedded in a PSS/PAH polymer layer.
The response of GNRs to the hyper-sound wave is also observed for the sample structure with GNRs embedded in PAzo/PAH films. The response of GNRs in this case is explained to be driven by the change of the refractive index of PAzo during the strain propagation.
The strong adhesion of sub-micron sized particles to surfaces is a nuisance, both for removing contaminating colloids from surfaces and for conscious manipulation of particles to create and test novel micro/nano-scale assemblies. The obvious idea of using detergents to ease these processes suffers from a lack of control: the action of any conventional surface-modifying agent is immediate and global. With photosensitive azobenzene containing surfactants we overcome these limitations. Such photo-soaps contain optical switches (azobenzene molecules), which upon illumination with light of appropriate wavelength undergo reversible trans-cis photo-isomerization resulting in a subsequent change of the physico-chemical molecular properties. In this work we show that when a spatial gradient in the composition of trans- and cis- isomers is created near a solid-liquid interface, a substantial hydrodynamic flow can be initiated, the spatial extent of which can be set, e.g., by the shape of a laser spot. We propose the concept of light induced diffusioosmosis driving the flow, which can remove, gather or pattern a particle assembly at a solid-liquid interface. In other words, in addition to providing a soap we implement selectivity: particles are mobilized and moved at the time of illumination, and only across the illuminated area.
Ein neuentwickeltes azobenzenhaltiges Material, das auf einem supramolekularen Konzept basiert, wird bezüglich seiner Strukturbildung während einer holografischen Belichtung bei 488 nm untersucht. Im Mittelpunkt stehen dabei eindimensionale, sinusförmige Reliefs mit Periodizitäten kleiner 500 nm. Es wird gezeigt, wie der Grad der Vernetzung der photosensitiven Schicht die Strukturbildung in diesem Größenbereich beeinflusst. Zur Maximierung der Strukturtiefe werden gezielt Prozessparameter der Belichtung sowie Materialparameter variiert. Unter Standardbedingungen und moderaten Belichtungsintensitäten von ca. 200 mW/cm² bilden sich innerhalb weniger Minuten bei einer Periode von 400 nm Strukturtiefen von bis zu 80nm aus. Durch die Beeinflussung von Materialparametern, wie Oberflächenspannung und Viskosität, wird die maximale Strukturtiefe auf 160nm verdoppelt. Durch Mehrfachbelichtungen wird auch die Bildung von zweidimensionalen Gittern untersucht. Die Originalstrukturen werden in einem Abformverfahren kopiert und in Schichten von unter UV-Licht aushärtenden Polymeren übertragen. Durch das Abformen kommt es zu einer geringfügigen Verschlechterung der Oberflächenqualität sowie Abnahme der Strukturtiefe. Dieser Verlust wird durch eine Verringerung der Prozesstemperatur verringert. Mithilfe kopierter Oberflächengitter werden organische Distributed Feedback-(DFB)-Laser zweiter Ordnung hergestellt, um den Einfluss von Gitterparametern auf die Emissionseigenschaften dieser Laser zu untersuchen. Dazu erfolgt zunächst die Charakterisierung der optischen Verstärkungseigenschaften ausgewählter organischer Emittermaterialien mittels der Variablen Strichlängenmethode. Das mit dem Laserfarbstoff Pyrromthen567 (PM567) dotierte Polystyrol (PS) zeigt dabei trotz konzentrationsbedingter geringer Absorption eine vergleichsweise geringe Gewinnschwelle von 50µJ/cm² bei ca. 575 nm. Das aktive Gast-Wirt-System der konjugierten Polymere MEH-PPV und F8BT* weist eine hohe Absorption und eine kleine Gewinnschwelle von 2,5 µJ/cm² bei 630 nm auf. Dieses Verhalten spiegelt sich auch in den Emissionseigenschaften der damit hergestellten DFB-Laser wieder. Die Dicke der aktiven Schichten liegen im Bereich hunderter Nanometer und wird so eingestellt, dass sich nur die transversalen Grundmoden im Wellenleiter ausbreiten können. Die Gitterperiode sind so gewählt, dass ein Lichtmode im Verstärkungsbereich des Emittermaterials liegt. Die Emissionslinien der Laser sind mit FWHM-Werten von bis zu 0,3 nm spektral sehr schmalbandig und weisen auf eine sehr gute Gitterqualität hin. Die Untersuchungen liefern minimale Laserschwellen und maximale differentielle Effizienzen von 4,0µJ/cm² und 8,4% für MEH-PPV in F8BT* (bei ca. 640nm) sowie 80 µJ/cm² und 0,9% für PM567 in PS (bei ca. 575 nm). Die Vergrößerung der Strukturtiefe von 40nm auf 80nm in mit MEH-PPV dotierten F8BT*-Lasern zu einem deutlichen Anstieg der ausgekoppelten Energie sowie der differentiellen Effizienz und einem geringen Absinken der Laserschwelle. Dies ist ein Resultat der erhöhten Kopplung von Lasermode und Gitter. Die Emission von DFB-Lasern mit zweidimensionalen Oberflächengittern zeigen eine Verringerung der Divergenz aber kein Einfluss auf die Laserschwelle. Abschließend erfolgt eine Vermessung der Photostabilität von DFB-Lasern unter verschiedenen Bedingungen. Das Einbringen eines konjugierten Polymers in eine aktive Matrix sowie der Betrieb in einer Stickstoffatmosphäre führen dabei zu einer Erhöhung der Lebensdauer auf über eine Million Pulse. Durch die Kombination von Oberflächengittern in PDMS-Filmen mit elektroaktiven Substraten wird eine elektrisch steuerbare Deformation des Beugungsgitters erreicht und auf einen DFB-Laser übertragen. Die spannungsinduzierte Verformung wird zunächst in Beugungsexperimenten charakterisiert und ein optimaler Arbeitspunkt bestimmt. Mit den beiden Elastomeren SEBS12 und VHB4910 werden in den Gittern maximale Periodenänderungen von 1,3% bzw. 3,4% bei einer Steuerspannung von 2 kV erreicht. Der Unterschied resultiert aus den verschiedenen Elastizitätsmoduln der Materialien. Übertragen auf DFB-Laser resultiert eine Variation der Gitterperiode senkrecht zu den Gitterlinien in einer kontinuierlichen Verschiebung der Emissionswellenlänge. Mit einem Spannungssignal von 3,25 kV wird die schmalbandige Emission eines elastischen DFB-Lasers kontinuierlich um fast 50nm von 604 nm zu 557 nm hin verschoben. Aus dem Deformationsverhalten sowohl der reinen Beugungsgitter als auch der Laser werden Rückschlüsse auf die Elastizität der verwendeten Materialien gezogen und erlauben Verbesserungen der Bauteile.
In festen azobenzenhaltigen Polymeren wurde bei Bestrahlung mit blauem Licht ein makroskopischer Materialtransport beobachtet. Um die Dynamik der Gitterentstehung zu verfolgen, wurde am Speicherring für Synchrotronstrahlung ein Gitterschreibaufbau errichtet. Damit konnte erstmals in dieser Arbeit die Gitterbildungsgeschwindigkeit in-situ simultan mit Röntgen- und Lichtstreuung untersucht werden. Mit Hilfe einer speziellen Anpassung der Röntgenstreutheorie konnten sehr gute Übereinstimmungen von theoretischen Berechnungen mit den Messergebnissen erzielt werden. Dabei konnte nachgewiesen werden, dass sich zeitgleich mit einem Oberflächengitter auch ein Dichtegitter entwickelt. Durch die Trennung beider Streuanteile ließ sich die Dynamik der Strukturentstehungen bestimmen. Des weiteren konnte erstmals mit Hilfe der Photoelektronenspektroskopie die molekulare Orientierung an der Oberfläche eines Oberflächengitters nachgewiesen werden. Die Bewegungsursache kann auf einen Impulsübertrag während der Isomerisierung zurückgeführt werden, während die Bewegungsrichtung durch den elektrischen Feldvektor festgelegt wird. Die Theorie der Gitterentstehung konnte verbessert werden.