Institut für Physik und Astronomie
Refine
Has Fulltext
- yes (3)
Document Type
- Doctoral Thesis (3)
Language
- English (3)
Is part of the Bibliography
- yes (3)
Keywords
- Organische Solarzellen (3) (remove)
Institute
Organic solar cells (OSCs), in recent years, have shown high efficiencies through the development of novel non-fullerene acceptors (NFAs). Fullerene derivatives have been the centerpiece of the accepting materials used throughout organic photovoltaic (OPV) research. However, since 2015 novel NFAs have been a game-changer and have overtaken fullerenes. However, the current understanding of the properties of NFAs for OPV is still relatively limited and critical mechanisms defining the performance of OPVs are still topics of debate.
In this thesis, attention is paid to understanding reduced-Langevin recombination with respect to the device physics properties of fullerene and non-fullerene systems. The work is comprised of four closely linked studies. The first is a detailed exploration of the fill factor (FF) expressed in terms of transport and recombination properties in a comparison of fullerene and non-fullerene acceptors. We investigated the key reason behind the reduced FF in the NFA (ITIC-based) devices which is faster non-geminate recombination relative to the fullerene (PCBM[70]-based) devices. This is then followed by a consideration of a newly synthesized NFA Y-series derivative which exhibits the highest power conversion efficiency for OSC at the time. Such that in the second study, we illustrated the role of disorder on the non-geminate recombination and charge extraction of thick NFA (Y6-based) devices. As a result, we enhanced the FF of thick PM6:Y6 by reducing the disorder which leads to suppressing the non-geminate recombination toward non-Langevin system. In the third work, we revealed the reason behind thickness independence of the short circuit current of PM6:Y6 devices, caused by the extraordinarily long diffusion length of Y6. The fourth study entails a broad comparison of a selection of fullerene and non-fullerene blends with respect to charge generation efficiency and recombination to unveil the importance of efficient charge generation for achieving reduced recombination.
I employed transient measurements such as Time Delayed Collection Field (TDCF), Resistance dependent Photovoltage (RPV), and steady-state techniques such as Bias Assisted Charge Extraction (BACE), Temperature-Dependent Space Charge Limited Current (T-SCLC), Capacitance-Voltage (CV), and Photo-Induce Absorption (PIA), to analyze the OSCs.
The outcomes in this thesis together draw a complex picture of multiple factors that affect reduced-Langevin recombination and thereby the FF and overall performance. This provides a suitable platform for identifying important parameters when designing new blend systems. As a result, we succeeded to improve the overall performance through enhancing the FF of thick NFA device by adjustment of the amount of the solvent additive in the active blend solution. It also highlights potentially critical gaps in the current experimental understanding of fundamental charge interaction and recombination dynamics.
Donor-acceptor (D-A) copolymers have revolutionized the field of organic electronics over the last decade. Comprised of a electron rich and an electron deficient molecular unit, these copolymers facilitate the systematic modification of the material's optoelectronic properties. The ability to tune the optical band gap and to optimize the molecular frontier orbitals as well as the manifold of structural sites that enable chemical modifications has created a tremendous variety of copolymer structures. Today, these materials reach or even exceed the performance of amorphous inorganic semiconductors. Most impressively, the charge carrier mobility of D-A copolymers has been pushed to the technologically important value of 10 cm^{2}V^{-1}s^{-1}. Furthermore, owed to their enormous variability they are the material of choice for the donor component in organic solar cells, which have recently surpassed the efficiency threshold of 10%. Because of the great number of available D-A copolymers and due to their fast chemical evolution, there is a significant lack of understanding of the fundamental physical properties of these materials. Furthermore, the complex chemical and electronic structure of D-A copolymers in combination with their semi-crystalline morphology impede a straightforward identification of the microscopic origin of their superior performance. In this thesis, two aspects of prototype D-A copolymers were analysed. These are the investigation of electron transport in several copolymers and the application of low band gap copolymers as acceptor component in organic solar cells. In the first part, the investigation of a series of chemically modified fluorene-based copolymers is presented. The charge carrier mobility varies strongly between the different derivatives, although only moderate structural changes on the copolymers structure were made. Furthermore, rather unusual photocurrent transients were observed for one of the copolymers. Numerical simulations of the experimental results reveal that this behavior arises from a severe trapping of electrons in an exponential distribution of trap states. Based on the comparison of simulation and experiment, the general impact of charge carrier trapping on the shape of photo-CELIV and time-of-flight transients is discussed. In addition, the high performance naphthalenediimide (NDI)-based copolymer P(NDI2OD-T2) was characterized. It is shown that the copolymer posses one of the highest electron mobilities reported so far, which makes it attractive to be used as the electron accepting component in organic photovoltaic cells.\par Solar cells were prepared from two NDI-containing copolymers, blended with the hole transporting polymer P3HT. I demonstrate that the use of appropriate, high boiling point solvents can significantly increase the power conversion efficiency of these devices. Spectroscopic studies reveal that the pre-aggregation of the copolymers is suppressed in these solvents, which has a strong impact on the blend morphology. Finally, a systematic study of P3HT:P(NDI2OD-T2) blends is presented, which quantifies the processes that limit the efficiency of devices. The major loss channel for excited states was determined by transient and steady state spectroscopic investigations: the majority of initially generated electron-hole pairs is annihilated by an ultrafast geminate recombination process. Furthermore, exciton self-trapping in P(NDI2OD-T2) domains account for an additional reduction of the efficiency. The correlation of the photocurrent to microscopic morphology parameters was used to disclose the factors that limit the charge generation efficiency. Our results suggest that the orientation of the donor and acceptor crystallites relative to each other represents the main factor that determines the free charge carrier yield in this material system. This provides an explanation for the overall low efficiencies that are generally observed in all-polymer solar cells.
Nucleation and growth of unsubstituted metal phthalocyanine films from solution on planar substrates
(2012)
In den vergangenen Jahren wurden kosteneffiziente nasschemische Beschichtungsverfahren für die Herstellung organischer Dünnfilme für verschiedene opto-elektronische Anwendungen entdeckt und weiterentwickelt. Unter anderem wurden Phthalocyanin-Moleküle in photoaktiven Schichten für die Herstellung von Solarzellen intensiv erforscht. Aufgrund der kleinen bzw. unbekannten Löslichkeit wurden Phthalocyanin-Schichten durch Aufdampfverfahren im Vakuum hergestellt. Des Weiteren wurde die Löslichkeit durch chemische Synthese erhöht, was aber die Eigenschaften von Pc beeinträchtigte. In dieser Arbeit wurde die Löslichkeit, optische Absorption und Stabilität von 8 verschiedenen unsubstituierten Metall-Phthalocyaninen in 28 verschiedenen Lösungsmitteln quantitativ gemessen. Wegen ausreichender Löslichkeit, Stabilität und Anwendbarkeit in organischen Solarzellen wurde Kupferphthalocyanin (CuPc) in Trifluoressigsäure (TFA) für weitere Untersuchungen ausgewählt. Durch die Rotationsbeschichtung von CuPc aus TFA Lösung wurde ein dünner Film aus der verdampfenden Lösung auf dem Substrat platziert. Nach dem Verdampfen des Lösungsmittels, die Nanobändern aus CuPc bedecken das Substrat. Die Nanobänder haben eine Dicke von etwa ~ 1 nm (typische Dimension eines CuPc-Molekül) und variierender Breite und Länge, je nach Menge des Materials. Solche Nanobändern können durch Rotationsbeschichtung oder auch durch andere Nassbeschichtungsverfahren, wie Tauchbeschichtung, erzeugt werden. Ähnliche Fibrillen-Strukturen entstehen durch Nassbeschichtung von anderen Metall-Phthalocyaninen, wie Eisen- und Magnesium-Phthalocyanin, aus TFA-Lösung sowie auf anderen Substraten, wie Glas oder Indium Zinnoxid. Materialeigenschaften von aufgebrachten CuPc aus TFA Lösung und CuPc in der Lösung wurden ausführlich mit Röntgenbeugung, Spektroskopie- und Mikroskopie Methoden untersucht. Es wird gezeigt, dass die Nanobänder nicht in der Lösung, sondern durch Verdampfen des Lösungsmittels und der Übersättigung der Lösung entstehen. Die Rasterkraftmikroskopie wurde dazu verwendet, um die Morphologie des getrockneten Films bei unterschiedlicher Konzentration zu studieren. Der Mechanismus der Entstehung der Nanobändern wurde im Detail studiert. Gemäß der Keimbildung und Wachstumstheorie wurde die Entstehung der CuPc Nanobänder aus einer übersättigt Lösung diskutiert. Die Form der Nanobändern wurde unter Berücksichtigung der Wechselwirkung zwischen den Molekülen und dem Substrat diskutiert. Die nassverarbeitete CuPc-Dünnschicht wurde als Donorschicht in organischen Doppelschicht Solarzellen mit C60-Molekül, als Akzeptor eingesetzt. Die Effizienz der Energieumwandlung einer solchen Zelle wurde entsprechend den Schichtdicken der CuPc Schicht untersucht.