Institut für Physik und Astronomie
Refine
Year of publication
Language
- English (250)
Is part of the Bibliography
- yes (250)
Keywords
- organic solar cells (13)
- perovskite solar cells (12)
- morphology (5)
- solar cells (5)
- voltage losses (5)
- Organic solar cells (4)
- charge transport (4)
- conjugated polymers (4)
- non-fullerene acceptors (4)
- photoluminescence (4)
- 2D perovskites (3)
- Solar cells (3)
- charge generation (3)
- inorganic perovskites (3)
- nonfullerene acceptors (3)
- open-circuit voltage (3)
- organic photovoltaics (3)
- organic semiconductors (3)
- photovoltaic devices (3)
- polymer solar cells (3)
- quasi-Fermi level splitting (3)
- thin films (3)
- Electronic and spintronic devices (2)
- ISOS-L-1I protocol (2)
- Organic electronics (2)
- Organic semiconductors (2)
- PCPDTBT (2)
- Perovskite solar cell (2)
- Semiconductors (2)
- UV-vis spectroscopy (2)
- carbon nitride (2)
- cesium lead halides (2)
- charge transfer (2)
- charge-transfer states (2)
- conductivity (2)
- crystal orientation (2)
- doping (2)
- driving force (2)
- excitonic materials (2)
- flexible (2)
- fluorinated organic spacer (2)
- heterojunction silicon solar cells (2)
- hysteresis (2)
- interface engineering (2)
- interface recombination (2)
- interfaces (2)
- mobility (2)
- non-radiative interface recombination (2)
- non-radiative recombination (2)
- nonradiative recombination (2)
- organic electronics (2)
- perovskite solar cell (2)
- phase purity (2)
- phase transition (2)
- photocurrent generation (2)
- photostability (2)
- quasi-Fermi level (2)
- quasi-steady-state photoinduced absorptions (2)
- recombination (2)
- recombinations (2)
- splitting (2)
- surface (2)
- tandem solar cells (2)
- temperature dependence (2)
- (Z)-isomer (1)
- Aggregate states (1)
- All-polymer heterojunctions (1)
- Alternating copolymers (1)
- Ambipolar charge transport (1)
- Ambipolar materials (1)
- Backbone modifications (1)
- Bilayer solar cells (1)
- Bulk heterojunction (1)
- C60 (1)
- CH center dot center dot center dot F hydrogen bonds (1)
- Capacitance spectroscopy (1)
- Carbon nitride (1)
- Carrier dynamics (1)
- Charge extraction (1)
- Charge generation (1)
- Charge recombination (1)
- Charge separation (1)
- Conformational disorder (1)
- Crystalline phases (1)
- CsPbI2Br (1)
- Donor materials (1)
- Donor-acceptor copolymers (1)
- Doped semiconductors (1)
- Effect of sintering (1)
- Efficiency optimization (1)
- Electric polarization (1)
- Electrical properties and parameters (1)
- Electron traps (1)
- Electronics, photonics and device physics (1)
- Energetic disorder (1)
- Energy science and technology (1)
- Energy-level alignment (1)
- Fermi-level alignment (1)
- Fermi-level pinning (1)
- Frank-Condon analysis (1)
- Free carrier generation (1)
- Hybrid solar cells (1)
- Interface dipole (1)
- Interfaces (1)
- Interlayer (1)
- Intrachain order (1)
- Intragap states (1)
- Inverted solar cells (1)
- Kelvin probe (1)
- Linearly increasing voltage (CELIV) (1)
- Low band-gap (1)
- Low voltage losses (1)
- Microscopic morphology (1)
- Mobility imbalance (1)
- Mobility relaxation (1)
- Monte Carlo simulation (1)
- Multiple trapping model (1)
- Non-geminate recombination (1)
- Nonaqueous sol-gel (1)
- Nonradiative recombination (1)
- OFET (1)
- Open-circuit voltage (1)
- Optical modeling (1)
- Optoelectronic devices and components (1)
- Optoelectronic properties (1)
- Optoelectronics (1)
- Organic LEDs (1)
- PBT7 (1)
- PBTTT (1)
- PEDOT (1)
- Partially alternating copolymers (1)
- Photo-CELIV (1)
- Photocatalysis (1)
- Photoconductivity (1)
- Photocurrent (1)
- Photonic devices (1)
- Photovoltaic gap (1)
- Polymer infiltration (1)
- Polymer intermixing (1)
- Recombination losses (1)
- RhB degradation (1)
- RhB photodegradation (1)
- SiO2 composite material (1)
- Solar energy and photovoltaic technology (1)
- Spectral diffusion (1)
- Statistical copolymers (1)
- Stille-type cross-coupling (1)
- Structure-property relationships (1)
- Sublimation with good yield (1)
- TCAD (1)
- Tandem solar cells (1)
- Thin nanocrystalline TiO2 layer (1)
- Time-dependent mobility (1)
- Time-of-flight (TOF) (1)
- Transient fluorescence (1)
- Transient photocurrent (1)
- Transport properties titania (1)
- UV nanoimprint lithography (1)
- Ultraviolet photoelectron spectroscopy (1)
- V-OC loss (1)
- Vacuum-level alignment (1)
- X-ray photoelectron spectroscopy (1)
- ZnO (1)
- absorption spectroscopy (1)
- aggregation (1)
- amorphous state (1)
- antireflection (1)
- built-in potential (1)
- bulk heterojunction (1)
- carbon suboxide (1)
- carbonaceous materials (1)
- characterization tools (1)
- charge accumulation (1)
- charge carrier extraction (1)
- charge carrier recombination (1)
- charge carrier transport (1)
- charge collection (1)
- charge generation yield (1)
- charge injection across hybrid interfaces (1)
- charge recombination (1)
- charge recombination yield (1)
- charge selectivity (1)
- charge transfer states (1)
- charge transfers (1)
- charge transport layers (1)
- conducting polymer (1)
- conducting polymers (1)
- conformational analysis (1)
- conjugated ladder polymers (1)
- covalent materials (1)
- crystalline ordering (1)
- crystallization (1)
- defects (1)
- degradation (1)
- diffusion length (1)
- domain purity (1)
- donor-acceptor interfaces (1)
- double-layer (1)
- drift length (1)
- efficiency potentials (1)
- electro-optical materials (1)
- electrodes (1)
- electron contact (1)
- electron-transport layers (1)
- energetic disorder (1)
- energetic disorders (1)
- energetic offset (1)
- energy gradients (1)
- energy losses (1)
- energy-level alignments (1)
- excess energy (1)
- external quantum efficiency (1)
- extraction (1)
- field-effect-transistor (1)
- figure of merit (1)
- fill factor (1)
- films (1)
- fluorination (1)
- fullerene (1)
- fullerenes (1)
- geminate recombination (1)
- geometrical deformations (1)
- glycerol oxidation (1)
- high performance polymers (1)
- hole extraction (1)
- hole selective materials (1)
- host-guest systems (1)
- hybrid metal oxides (1)
- interaction parameter (1)
- interfacial layers (1)
- lead halide perovskite films (1)
- lifetime‐ mobility product (1)
- light management (1)
- light polarisation (1)
- light-emitting diodes (1)
- liquid crystal polymers (1)
- loss mechanisms (1)
- mesocrystals (1)
- metal oxide (1)
- metal-free photocatalysis (1)
- microscopy (1)
- mixed domains (1)
- mobile ions (1)
- molar mass distribution (1)
- molecular doping (1)
- molecular dynamics method (1)
- molecular weight (1)
- molecular weight distribution (1)
- molybdenum oxide (1)
- naphthalenediimide (1)
- non-Langevin recombination (1)
- non-Langevin reduction factors (1)
- nonradiative losses (1)
- nonradiative voltage losses (1)
- nucleation (1)
- optical hole burning (1)
- optical simulations (1)
- organic interfaces (1)
- organic light-emitting diode (1)
- organohalide lead perovskites (1)
- oxygen plasma (1)
- passivation (1)
- perovskites (1)
- phosphonic acid (1)
- photocatalysts (1)
- photochemistry (1)
- photophysics (1)
- poly(heptazine imide) (1)
- polymer:fullerene bulk heterojunction (1)
- power conversion efficiency (1)
- random copolymer (1)
- regular planar architecture (1)
- resonant X-ray scattering (1)
- selective contact (1)
- self-assembled monolayers (1)
- semiconducting polymers (1)
- simulations (1)
- small molecules (1)
- spectroelectrochemistry (1)
- spin-related factors (1)
- spiro-OMeTAD (1)
- steady‐ state photoconductance (1)
- structure (1)
- sulfur (1)
- surface band bending (1)
- surface modification (1)
- surface photovoltage (1)
- surface states (1)
- surface wetting (1)
- synthesis (1)
- ternary blends (1)
- thick junctions (1)
- thiophene (1)
- transient absorption spectroscopy (1)
- transient spectroscopy (1)
- transport layer (1)
- transport layers (1)
- triple-cation perovskite (1)
- triplet excited states (1)
- ultraviolet photoelectron spectroscopy (1)
- upconversion (1)
- water reduction reactions (1)
- work function (1)
Institute
- Institut für Physik und Astronomie (250)
- Extern (2)
- Institut für Chemie (1)
Carbon suboxide (C3O2) is a unique molecule able to polymerize spontaneously into highly conjugated light-absorbing structures at temperatures as low as 0 degrees C. Despite obvious advantages, little is known about the nature and the functional properties of this carbonaceous material. In this work, the aim is to bring "red carbon," a forgotten polymeric semiconductor, back to the community's attention.
A solution polymerization process is adapted to simplify the synthesis and control the structure.
This allows one to obtain this crystalline covalent material at low temperatures. Both spectroscopic and elemental analyses support the chemical structure represented as conjugated ladder polypyrone ribbons.
Density functional theory calculations suggest a crystalline structure of AB stacks of polypyrone ribbons and identify the material as a direct bandgap semiconductor with a medium bandgap that is further confirmed by optical analysis.
The material shows promising photocatalytic performance using blue light.
Moreover, the simple condensation-aromatization route described here allows the straightforward fabrication of conjugated ladder polymers and can be inspiring for the synthesis of carbonaceous materials at low temperatures in general.
Cost-efficient, visible-light-driven hydrogen production from water is an attractive potential source of clean, sustainable fuel. Here, it is shown that thermal solid state reactions of traditional carbon nitride precursors (cyanamide, melamine) with NaCl, KCl, or CsCl are a cheap and straightforward way to prepare poly(heptazine imide) alkali metal salts, whose thermodynamic stability decreases upon the increase of the metal atom size. The chemical structure of the prepared salts is confirmed by the results of X-ray photoelectron and infrared spectroscopies, powder X-ray diffraction and electron microscopy studies, and, in the case of sodium poly(heptazine imide), additionally by atomic pair distribution function analysis and 2D powder X-ray diffraction pattern simulations. In contrast, reactions with LiCl yield thermodynamically stable poly(triazine imides). Owing to the metastability and high structural order, the obtained heptazine imide salts are found to be highly active photo-catalysts in Rhodamine B and 4-chlorophenol degradation, and Pt-assisted sacrificial water reduction reactions under visible light irradiation. The measured hydrogen evolution rates are up to four times higher than those provided by a benchmark photocatalyst, mesoporous graphitic carbon nitride. Moreover, the products are able to photocatalytically reduce water with considerable reaction rates, even when glycerol is used as a sacrificial hole scavenger.
Monolithic perovskite silicon tandem solar cells can overcome the theoretical efficiency limit of silicon solar cells. This requires an optimum bandgap, high quantum efficiency, and high stability of the perovskite. Herein, a silicon heterojunction bottom cell is combined with a perovskite top cell, with an optimum bandgap of 1.68 eV in planar p-i-n tandem configuration. A methylammonium-free FA(0.75)Cs(0.25)Pb(I0.8Br0.2)(3) perovskite with high Cs content is investigated for improved stability. A 10% molarity increase to 1.1 m of the perovskite precursor solution results in approximate to 75 nm thicker absorber layers and 0.7 mA cm(-2) higher short-circuit current density. With the optimized absorber, tandem devices reach a high fill factor of 80% and up to 25.1% certified efficiency. The unencapsulated tandem device shows an efficiency improvement of 2.3% (absolute) over 5 months, showing the robustness of the absorber against degradation. Moreover, a photoluminescence quantum yield analysis reveals that with adapted charge transport materials and surface passivation, along with improved antireflection measures, the high bandgap perovskite absorber has the potential for 30% tandem efficiency in the near future.
Monolithic perovskite silicon tandem solar cells can overcome the theoretical efficiency limit of silicon solar cells. This requires an optimum bandgap, high quantum efficiency, and high stability of the perovskite. Herein, a silicon heterojunction bottom cell is combined with a perovskite top cell, with an optimum bandgap of 1.68 eV in planar p-i-n tandem configuration. A methylammonium-free FA(0.75)Cs(0.25)Pb(I0.8Br0.2)(3) perovskite with high Cs content is investigated for improved stability. A 10% molarity increase to 1.1 m of the perovskite precursor solution results in approximate to 75 nm thicker absorber layers and 0.7 mA cm(-2) higher short-circuit current density. With the optimized absorber, tandem devices reach a high fill factor of 80% and up to 25.1% certified efficiency. The unencapsulated tandem device shows an efficiency improvement of 2.3% (absolute) over 5 months, showing the robustness of the absorber against degradation. Moreover, a photoluminescence quantum yield analysis reveals that with adapted charge transport materials and surface passivation, along with improved antireflection measures, the high bandgap perovskite absorber has the potential for 30% tandem efficiency in the near future.
Time-delayed collection field (TDCF) and bias-amplified charge extraction (BACE) are applied to as-prepared and annealed poly(3-hexylthiophene):[6,6]-phenyl C-71 butyric acid methyl ester (P3HT:PCBM) blends coated from chloroform. Despite large differences in fill factor, short-circuit current, and power conversion efficiency, both blends exhibit a negligible dependence of photogeneration on the electric field and strictly bimolecular recombination (BMR) with a weak dependence of the BMR coefficient on charge density. Drift-diffusion simulations are performed using the measured coefficients and mobilities, taking into account bimolecular recombination and the possible effects of surface recombination. The excellent agreement between the simulation and the experimental data for an intensity range covering two orders of magnitude indicates that a field-independent generation rate and a density-independent recombination coefficient describe the current-voltage characteristics of the annealed P3HT: PCBM devices, while the performance of the as-prepared blend is shown to be limited by space charge effects due to a low hole mobility. Finally, even though the bimolecular recombination coefficient is small, surface recombination is found to be a negligible loss mechanism in these solar cells.
Polymer solar cell devices with nanostructured blend layers have been fabricated using single- and dual- component polymer nanospheres. Starting from an electron-donating and an electron-accepting polyfluorene derivative, PFB and F8BT, dissolved in suitable organic solvents, dispersions of solid particles with mean diameters of ca. 50 nm, containing either the pure polymer components or a mixture of PFB and F8BT in each particle, were prepared with the miniemulsion process. Photovoltaic devices based on these particles have been studied with respect to the correlation between external quantum efficiency and layer composition. It is shown that the properties of devices containing a blend of single-component PFB and F8BT particles differ significantly from those of solar cells based on blend particles, even for the same layer composition. Various factors determining the quantum efficiency in both kinds of devices are identified and discussed, taking into account the spectroscopic properties of the particles. An external quantum efficiency of ca. 4% is measured for a device made from polymer blend nanoparticles containing PFB:F8BT at a weight ratio of 1:2 in each individual nanosphere. This is among the highest values reported so far for photovoltaic cells using this material combination
Compared to their inorganic counterparts, organic semiconductors suffer from relatively low charge carrier mobilities. Therefore, expressions derived for inorganic solar cells to correlate characteristic performance parameters to material properties are prone to fail when applied to organic devices. This is especially true for the classical Shockley-equation commonly used to describe current-voltage (JV)-curves, as it assumes a high electrical conductivity of the charge transporting material. Here, an analytical expression for the JV-curves of organic solar cells is derived based on a previously published analytical model. This expression, bearing a similar functional dependence as the Shockley-equation, delivers a new figure of merit a to express the balance between free charge recombination and extraction in low mobility photoactive materials. This figure of merit is shown to determine critical device parameters such as the apparent series resistance and the fill factor.
Compared to their inorganic counterparts, organic semiconductors suffer from relatively low charge carrier mobilities. Therefore, expressions derived for inorganic solar cells to correlate characteristic performance parameters to material properties are prone to fail when applied to organic devices. This is especially true for the classical Shockley-equation commonly used to describe current-voltage (JV)-curves, as it assumes a high electrical conductivity of the charge transporting material. Here, an analytical expression for the JV-curves of organic solar cells is derived based on a previously published analytical model. This expression, bearing a similar functional dependence as the Shockley-equation, delivers a new figure of merit α to express the balance between free charge recombination and extraction in low mobility photoactive materials. This figure of merit is shown to determine critical device parameters such as the apparent series resistance and the fill factor.
Compared to their inorganic counterparts, organic semiconductors suffer from relatively low charge carrier mobilities. Therefore, expressions derived for inorganic solar cells to correlate characteristic performance parameters to material properties are prone to fail when applied to organic devices. This is especially true for the classical Shockley-equation commonly used to describe current-voltage (JV)-curves, as it assumes a high electrical conductivity of the charge transporting material. Here, an analytical expression for the JV-curves of organic solar cells is derived based on a previously published analytical model. This expression, bearing a similar functional dependence as the Shockley-equation, delivers a new figure of merit α to express the balance between free charge recombination and extraction in low mobility photoactive materials. This figure of merit is shown to determine critical device parameters such as the apparent series resistance and the fill factor.
A water soluble fluorescent polymer as a dual colour sensor for temperature and a specific protein
(2013)
We present two thermoresponsive water soluble copolymers prepared via free radical statistical copolymerization of N-isopropylacrylamide (NIPAm) and of oligo(ethylene glycol) methacrylates (OEGMAs), respectively, with a solvatochromic 7-(diethylamino)-3-carboxy-coumarin (DEAC)-functionalized monomer. In aqueous solutions, the NIPAm-based copolymer exhibits characteristic changes in its fluorescence profile in response to a change in solution temperature as well as to the presence of a specific protein, namely an anti-DEAC antibody. This polymer emits only weakly at low temperatures, but exhibits a marked fluorescence enhancement accompanied by a change in its emission colour when heated above its cloud point. Such drastic changes in the fluorescence and absorbance spectra are observed also upon injection of the anti-DEAC antibody, attributed to the specific binding of the antibody to DEAC moieties. Importantly, protein binding occurs exclusively when the polymer is in the well hydrated state below the cloud point, enabling a temperature control on the molecular recognition event. On the other hand, heating of the polymer-antibody complexes releases a fraction of the bound antibody. In the presence of the DEAC-functionalized monomer in this mixture, the released antibody competitively binds to the monomer and the antibody-free chains of the polymer undergo a more effective collapse and inter-aggregation. In contrast, the emission properties of the OEGMA-based analogous copolymer are rather insensitive to the thermally induced phase transition or to antibody binding. These opposite behaviours underline the need for a carefully tailored molecular design of responsive polymers aimed at specific applications, such as biosensing.