Extern
Refine
Year of publication
Document Type
- Doctoral Thesis (33)
- Article (3)
- Monograph/Edited Volume (2)
- Master's Thesis (1)
- Postprint (1)
Language
- English (40) (remove)
Keywords
- Nachhaltigkeit (3)
- hydraulic fracturing (2)
- sustainability (2)
- Acetobacteraceae (1)
- Active noise control (1)
- Amblystegiaceae (1)
- Analyse von Abflussganglinien (1)
- Anden (1)
- Andes (1)
- Antibiotikaresistenz (1)
- Artificial Intelligence (1)
- Auenbereich (1)
- Ausbreitung (1)
- Ausbreitung der kosmischen Strahlung (1)
- Aussterbeschuld (1)
- Autismus (1)
- Bachstufen (1)
- Bandenenergien (1)
- Big Data Analytics (1)
- Big data mining zu Hochwasserrisiken (1)
- Biochemie (1)
- Biodiversität (1)
- Bodenbearbeitung (1)
- Botanik (1)
- Braunmoose (1)
- Bruchausbreitung (1)
- Bryophyten (1)
- CLSM (1)
- CaM4 (1)
- Cell-free protein synthesis (1)
- Chaos Theory (1)
- Chaostheorie (1)
- Cherenkov telescopes (1)
- Cherenkov-Teleskope (1)
- China (1)
- Coiled coils (1)
- Computersimulation (1)
- Convergence (1)
- Dark Matter (1)
- Datenanalyse (1)
- Deformation (1)
- Dichteeffekte (1)
- Digital Rebound (1)
- Digitalisierung (1)
- Dunkle Materie (1)
- Düngung (1)
- Einwanderungskredit (1)
- Einzelmolekülkraftspektroskopie (1)
- Einzugsgebietshydrologie (1)
- Electrophysiology (1)
- Emotionserkennung (1)
- Endophyten (1)
- Energie (1)
- Energieerzeugung (1)
- Epiphyten (1)
- Erdbeben (1)
- Essigsäurebakterien (1)
- Fernerkundung (1)
- Flood Change (1)
- Flood Risk Big Data Mining (1)
- Gebirgsbäche (1)
- Geflügelmist (1)
- Geomorphologie (1)
- Geothermal monitoring (1)
- Geothermisches Monitoring (1)
- Gerinne-Hang-Kopplung (1)
- German-Jewish History (1)
- Geschichte 2003-2006 (1)
- Geschiebetransport (1)
- Gezeitenwechselwirkungen (1)
- Global Value Chains (1)
- Globale Wertschöpfungsketten (1)
- Greenland Ice Sheet (1)
- Grenzflächen (1)
- Grundgestein (1)
- Grönländisches Eisschild (1)
- Grünland (1)
- GxLMS algorithm (1)
- Halogenbindung (1)
- Hanghydrologie (1)
- Hydrogele (1)
- Hydrograph Analysis (1)
- Industrial Internet of Things (1)
- Industrie 4.0 (1)
- Industrielles Internet der Dinge (1)
- Industry 4.0 (1)
- Induzierte Seismizität (1)
- Informations- und Kommunikationstechnologien (1)
- Injektion (1)
- Injektionsschema (1)
- Innovationen in den Städten (1)
- Interface-Engineering (1)
- Investitionspolitik (1)
- Irak (1)
- JUB1 (1)
- Kleinwinkelröntgenstreuung (1)
- Klimafolgenforschung (1)
- Klimawandel (1)
- Knochen (1)
- Kohlenstoffdioxid (1)
- Kontaktschichten (1)
- Koordinationskomplexe (1)
- Künstliche Intelligenz (1)
- LMS without reference signal (1)
- Lakunen (1)
- Landnutzung (1)
- Landnutzungshistorie (1)
- Lithosphäre (1)
- Luftverschmutzung (1)
- Meeresspiegelanstieg (1)
- Membrane proteins (1)
- Mesokristalle (1)
- Methan (1)
- Micro-translantation (1)
- Minderheit (1)
- Mineralisierung (1)
- Mistausbringung (1)
- Mobilität (1)
- Model-Daten Integration (1)
- Modellierung (1)
- Modellkalibrierung (1)
- Modellvalidierung (1)
- Moden Stabilität (1)
- Moorsukzession (1)
- Moos-Mikroben-Interaktion (1)
- Moos-assoziierte Methanoxidation (1)
- Moos-assoziierte Methanproduktion (1)
- Nanopartikel (1)
- Naturgefahren (1)
- Non-linear Geoscience (1)
- Non-stationary Flood Risk (1)
- Open Access (1)
- Open Source (1)
- Oxo-Kohlenstoff (1)
- PM10 (1)
- PVA (population viability analysis) (1)
- Paläoklima (1)
- Patent (1)
- Peptid (1)
- Peptide (1)
- Perowskit (1)
- Perowskit Solarzellen (1)
- Pflanzenwissenschaften (1)
- Phasenraum des Time Delay Embedding (1)
- Photovoltaik (1)
- Physik (1)
- Politik (1)
- Populationsgefährdungsanalyse (1)
- Privathaushalte (1)
- Protein expression (1)
- Quadratsäure (1)
- Rare and Unseasonal Flood (1)
- Recurrence Plots (1)
- Rekurrenzanalyse (1)
- Rekurrenzplot (1)
- Roboter (1)
- SAXS (1)
- Schadensmodellierung (1)
- Schallemissionen (1)
- Schatten eines Schwarzen Lochs (1)
- Schwarzes Loch (1)
- Selbstähnlichkeit (1)
- Seneszenz (1)
- Silizium (1)
- Simulationsframework (1)
- Skalierung (1)
- Spannungsmessung (1)
- Sphagnum (1)
- Stadtwachstumsraten (1)
- Starkregen (1)
- Staubemission (1)
- Stern-Brauner Zwerg Systeme (1)
- Stern-Planet Systeme (1)
- Sternentwicklung (1)
- Stethophyma grossum (1)
- Stimuli (1)
- Städte (1)
- Subduktion (1)
- Sumpfschrecke (1)
- Superconducting gravimetry (1)
- Supraleit-Gravimetrie (1)
- Synchrotronstrahlung (1)
- Tandem-Solarzelle (1)
- Teukolsky Gleichung (1)
- Teukolsky master equation (1)
- Thermoelektrizität (1)
- Thioester (1)
- Time Embedded Phase Space (1)
- Time series analysis (1)
- Torfmoose (1)
- Training Sozialer Kognition (1)
- Transdisziplinarität (1)
- Transkriptionsfaktor (1)
- Treibhausgase (1)
- Trockenstress (1)
- Unsicherheiten (1)
- Variationen terrestrischer Wasserspeicher (1)
- Vernetzer (1)
- Vertreibung (1)
- Vulnerabilität (1)
- Winderosion (1)
- Wirtsspezifität (1)
- Wärmeleitfähigkeit von Schnee (1)
- Zeitpunkt von Störungen (1)
- Zeitreihenanalyse (1)
- abrupte Übergänge (1)
- acoustic emissions (1)
- agricultural (1)
- air pollution (1)
- airborne bacteria (1)
- antibiotic resistance (1)
- autism (1)
- basement rock (1)
- bedload transport (1)
- biochemistry (1)
- black hole (1)
- black hole shadows (1)
- bone (1)
- brown mosses (1)
- bryophytes (1)
- calmodulin (1)
- carbon dioxide (1)
- catchment hydrology (1)
- channel steps (1)
- channel-hillslope coupling (1)
- climate change (1)
- climate impact research (1)
- closed chamber method (1)
- coiled coils (1)
- colonization credit (1)
- contact layers (1)
- coordination complexes (1)
- cosmic ray propagation (1)
- crosslinker (1)
- damage modeling (1)
- data analysis (1)
- deformation (1)
- density effects (1)
- digitalization (1)
- dispersal (1)
- displacement (1)
- disturbance timing (1)
- drought stress (1)
- dust emission (1)
- dwarf spheroidal galaxies (1)
- earthquakes (1)
- ecology (1)
- economic impacts (1)
- emotion recognition (1)
- endophytes (1)
- energy (1)
- energy levels (1)
- enhanced geothermal system (1)
- enhanced geothermal systems (EGS) (1)
- environmental upgrading (1)
- epiphytes (1)
- extinction debt (1)
- fecal contamination (1)
- fertilization (1)
- flooding (1)
- fracture growth (1)
- fäkale Kontamination (1)
- galactic magnetic fields (1)
- galaktische Magnetfelder (1)
- gefangene lichtartige Kurven (1)
- geographische Großstudie (1)
- geomorphology (1)
- geschlossene Haubenmessmethode (1)
- global flood model (1)
- global hydrological modeling (1)
- globale hydrologische Modellierung (1)
- globales Überschwemmungsmodell (1)
- grassland (1)
- greenhouse gases (1)
- halogen bonding (1)
- high resolution (1)
- hillslope hydrology (1)
- hohe Auflösung (1)
- host-specificity (1)
- hydraulische Risserzeugung (1)
- hydraulisches Aufbrechen (1)
- hydrogels (1)
- hyporheic zone (1)
- hyporheische Zone (1)
- ice-flow modeling (1)
- induced seismicity (1)
- information and communication technologies (1)
- injection (1)
- injection scheme (1)
- innovations in the city (1)
- interface engineering (1)
- interfaces (1)
- konfokales Laser-Scanning-Mikroskop (1)
- lacunae (1)
- lacuno-canalicular network (1)
- lakuno-kanaliculäres Netzwerk (1)
- land use (1)
- land use history (1)
- landwirtschaftlich (1)
- large marsh grasshopper (1)
- large-scale study (1)
- lithosphere (1)
- low-cost sensor (1)
- luftgetragene Bakterien (1)
- manure application (1)
- mechanics (1)
- mechanische Stabilität (1)
- mesocrystals (1)
- methane (1)
- methanogenic archaea (1)
- methanotrophic bacteria (1)
- methanoxidierende Bakterien (1)
- methanproduzierende Archaeen (1)
- mikrobielle Moor-Kerngemeinschaft (1)
- mineralization (1)
- mobility (1)
- mode stability (1)
- model calibration (1)
- model validation (1)
- model-data integration (1)
- modelling (1)
- moss-associated archaea (1)
- moss-associated bacteria (1)
- moss-associated methanogenesis (1)
- moss-associated methanotrophy (1)
- moss-microbe-interactions (1)
- mountain rivers (1)
- nachhaltige Stadtentwicklung (1)
- nachhaltige industrielle Entwicklung (1)
- nachhaltiges Lieferkettenmanagement (1)
- nanoparticles (1)
- nanoporous carbon particles (1)
- nanoporöser Kohlenstoffpartikel (1)
- natural hazards (1)
- nicht-thermische Strahlung (1)
- nichtlineare Geowissenschaften (1)
- nichtlineare Zeitreihenanalyse (1)
- nichtstationäres Hochwasserrisiko (1)
- non-thermal radiation (1)
- nonlinear time series analysis (1)
- northern peatlands (1)
- numerical modelling (1)
- numerische Modellierung (1)
- nördliche Moore (1)
- organic-inorganic hybrids (1)
- organisch-anorganische Hybride (1)
- organische Bodensubstanz (1)
- oxocarbon (1)
- palaeoclimate (1)
- patent (1)
- peatland core microbiome (1)
- peatland development (1)
- peptide (1)
- peptides (1)
- perovskite (1)
- perovskite solar cells (1)
- petrothermales System (EGS) (1)
- photovoltaic (1)
- physics (1)
- plant science (1)
- pluvial flooding (1)
- policy (1)
- poultry manure (1)
- private households (1)
- probabilistic (1)
- recurrence analysis (1)
- regime shifts (1)
- remote sensing (1)
- riparian zone (1)
- robot (1)
- räumlich explizites Modell (1)
- sandige Böden (1)
- sandy soils (1)
- scaling (1)
- sea-level rise (1)
- seasonality (1)
- self-similarity (1)
- seltenes und saisonunübliches Hochwasser (1)
- senescence (1)
- silicon (1)
- simulation framework (1)
- single-molecule force spectroscopy (1)
- snow thermal conductivity (1)
- social cognition training (1)
- soil organic matter (1)
- spatially explicit model (1)
- species richness (1)
- sphäroidische Zwerggalaxien (1)
- squaric acid (1)
- star-brown dwarf systems (1)
- star-planet systems (1)
- stellar evolution (1)
- stimuli (1)
- stress measurement (1)
- subduction (1)
- sustainable development (1)
- sustainable industrial development (1)
- sustainable supply chain management (1)
- synchrotron radiation (1)
- tandem solar cell (1)
- terrestrial water storage variation (1)
- thermoelectricity (1)
- thioester (1)
- tidal interactions (1)
- tillage (1)
- transcription factor (1)
- transdisciplinary (1)
- trapping (1)
- ultra-high energy cosmic rays (1)
- ultrahochenergetische kosmische Strahlung (1)
- uncertainty (1)
- urban (1)
- urban growth (1)
- verbesserte geothermische Systeme (1)
- vulnerability (1)
- wind erosion (1)
- µCT (1)
- Änderungen des Hochwassers (1)
- Ökologie (1)
- Überschwemmungen (1)
- Þeistareykir Iceland (1)
- Þeistareykir Island (1)
- ökologisches Upgrading (1)
Institute
- Extern (40)
- Institut für Physik und Astronomie (10)
- Institut für Geowissenschaften (8)
- Institut für Biochemie und Biologie (7)
- Institut für Umweltwissenschaften und Geographie (6)
- Fachgruppe Soziologie (1)
- Institut für Chemie (1)
- Institut für Jüdische Theologie (1)
- Lehreinheit für Wirtschafts-Arbeit-Technik (1)
- Strukturbereich Kognitionswissenschaften (1)
The concept of hydrologic connectivity summarizes all flow processes that link separate regions of a landscape. As such, it is a central theme in the field of catchment hydrology, with influence on neighboring disciplines such as ecology and geomorphology. It is widely acknowledged to be an important key in understanding the response behavior of a catchment and has at the same time inspired research on internal processes over a broad range of scales. From this process-hydrological point of view, hydrological connectivity is the conceptual framework to link local observations across space and scales.
This is the context in which the four studies this thesis comprises of were conducted. The focus was on structures and their spatial organization as important control on preferential subsurface flow. Each experiment covered a part of the conceptualized flow path from hillslopes to the stream: soil profile, hillslope, riparian zone, and stream.
For each study site, the most characteristic structures of the investigated domain and scale, such as slope deposits and peat layers were identified based on preliminary or previous investigations or literature reviews. Additionally, further structural data was collected and topographical analyses were carried out. Flow processes were observed either based on response observations (soil moisture changes or discharge patterns) or direct measurement (advective heat transport). Based on these data, the flow-relevance of the characteristic structures was evaluated, especially with regard to hillslope to stream connectivity.
Results of the four studies revealed a clear relationship between characteristic spatial structures and the hydrological behavior of the catchment. Especially the spatial distribution of structures throughout the study domain and their interconnectedness were crucial for the establishment of preferential flow paths and their relevance for large-scale processes. Plot and hillslope-scale irrigation experiments showed that the macropores of a heterogeneous, skeletal soil enabled preferential flow paths at the scale of centimeters through the otherwise unsaturated soil. These flow paths connected throughout the soil column and across the hillslope and facilitated substantial amounts of vertical and lateral flow through periglacial slope deposits.
In the riparian zone of the same headwater catchment, the connectivity between hillslopes and stream was controlled by topography and the dualism between characteristic subsurface structures and the geomorphological heterogeneity of the stream channel. At the small scale (1 m to 10 m) highest gains always occurred at steps along the longitudinal streambed profile, which also controlled discharge patterns at the large scale (100 m) during base flow conditions (number of steps per section). During medium and high flow conditions, however, the impact of topography and parafluvial flow through riparian zone structures prevailed and dominated the large-scale response patterns.
In the streambed of a lowland river, low permeability peat layers affected the connectivity between surface water and groundwater, but also between surface water and the hyporheic zone. The crucial factor was not the permeability of the streambed itself, but rather the spatial arrangement of flow-impeding peat layers, causing increased vertical flow through narrow “windows” in contrast to predominantly lateral flow in extended areas of high hydraulic conductivity sediments.
These results show that the spatial organization of structures was an important control for hydrological processes at all scales and study areas. In a final step, the observations from different scales and catchment elements were put in relation and compared. The main focus was on the theoretical analysis of the scale hierarchies of structures and processes and the direction of causal dependencies in this context. Based on the resulting hierarchical structure, a conceptual framework was developed which is capable of representing the system’s complexity while allowing for adequate simplifications.
The resulting concept of the parabolic scale series is based on the insight that flow processes in the terrestrial part of the catchment (soil and hillslopes) converge. This means that small-scale processes assemble and form large-scale processes and responses. Processes in the riparian zone and the streambed, however, are not well represented by the idea of convergence. Here, the large-scale catchment signal arrives and is modified by structures in the riparian zone, stream morphology, and the small-scale interactions between surface water and groundwater. Flow paths diverge and processes can better be represented by proceeding from large scales to smaller ones. The catchment-scale representation of processes and structures is thus the conceptual link between terrestrial hillslope processes and processes in the riparian corridor.
Emotions are a complex concept and they are present in our everyday life. Persons on the autism spectrum are said to have difficulties in social interactions, showing deficits in emotion recognition in comparison to neurotypically developed persons. But social-emotional skills are believed to be positively augmented by training. A new adaptive social cognition training tool “E.V.A.” is introduced which teaches emotion recognition from face, voice and body language. One cross-sectional and one longitudinal study with adult neurotypical and autistic participants were conducted. The aim of the cross-sectional study was to characterize the two groups and see if differences in their social-emotional skills exist. The longitudinal study, on the other hand, aimed for detecting possible training effects following training with the new training tool. In addition, in both studies usability assessments were conducted to investigate the perceived usability of the new tool for neurotypical as well as autistic participants. Differences were found between autistic and neurotypical participants in their social-emotional and emotion recognition abilities. Training effects for neurotypical participants in an emotion recognition task were found after two weeks of home training. Similar perceived usability was found for the neurotypical and autistic participants. The current findings suggest that persons with ASC do not have a general deficit in emotion recognition, but are in need for more time to correctly recognize emotions. In addition, findings suggest that training emotion recognition abilities is possible. Further studies are needed to verify if the training effects found for neurotypical participants also manifest in a larger ASC sample.
Recurrences in past climates
(2023)
Our ability to predict the state of a system relies on its tendency to recur to states it has visited before. Recurrence also pervades common intuitions about the systems we are most familiar with: daily routines, social rituals and the return of the seasons are just a few relatable examples. To this end, recurrence plots (RP) provide a systematic framework to quantify the recurrence of states. Despite their conceptual simplicity, they are a versatile tool in the study of observational data. The global climate is a complex system for which an understanding based on observational data is not only of academical relevance, but vital for the predurance of human societies within the planetary boundaries. Contextualizing current global climate change, however, requires observational data far beyond the instrumental period. The palaeoclimate record offers a valuable archive of proxy data but demands methodological approaches that adequately address its complexities. In this regard, the following dissertation aims at devising novel and further developing existing methods in the framework of recurrence analysis (RA). The proposed research questions focus on using RA to capture scale-dependent properties in nonlinear time series and tailoring recurrence quantification analysis (RQA) to characterize seasonal variability in palaeoclimate records (‘Palaeoseasonality’).
In the first part of this thesis, we focus on the methodological development of novel approaches in RA. The predictability of nonlinear (palaeo)climate time series is limited by abrupt transitions between regimes that exhibit entirely different dynamical complexity (e.g. crossing of ‘tipping points’). These possibly depend on characteristic time scales. RPs are well-established for detecting transitions and capture scale-dependencies, yet few approaches have combined both aspects. We apply existing concepts from the study of self-similar textures to RPs to detect abrupt transitions, considering the most relevant time scales. This combination of methods further results in the definition of a novel recurrence based nonlinear dependence measure. Quantifying lagged interactions between multiple variables is a common problem, especially in the characterization of high-dimensional complex systems. The proposed ‘recurrence flow’ measure of nonlinear dependence offers an elegant way to characterize such couplings. For spatially extended complex systems, the coupled dynamics of local variables result in the emergence of spatial patterns. These patterns tend to recur in time. Based on this observation, we propose a novel method that entails dynamically distinct regimes of atmospheric circulation based on their recurrent spatial patterns. Bridging the two parts of this dissertation, we next turn to methodological advances of RA for the study of Palaeoseasonality. Observational series of palaeoclimate ‘proxy’ records involve inherent limitations, such as irregular temporal sampling. We reveal biases in the RQA of time series with a non-stationary sampling rate and propose a correction scheme.
In the second part of this thesis, we proceed with applications in Palaeoseasonality. A review of common and promising time series analysis methods shows that numerous valuable tools exist, but their sound application requires adaptions to archive-specific limitations and consolidating transdisciplinary knowledge. Next, we study stalagmite proxy records from the Central Pacific as sensitive recorders of mid-Holocene El Niño-Southern Oscillation (ENSO) dynamics. The records’ remarkably high temporal resolution allows to draw links between ENSO and seasonal dynamics, quantified by RA. The final study presented here examines how seasonal predictability could play a role for the stability of agricultural societies. The Classic Maya underwent a period of sociopolitical disintegration that has been linked to drought events. Based on seasonally resolved stable isotope records from Yok Balum cave in Belize, we propose a measure of seasonal predictability. It unveils the potential role declining seasonal predictability could have played in destabilizing agricultural and sociopolitical systems of Classic Maya populations.
The methodological approaches and applications presented in this work reveal multiple exciting future research avenues, both for RA and the study of Palaeoseasonality.
Sustainable urban growth
(2022)
This dissertation explores the determinants for sustainable and socially optimalgrowth in a city. Two general equilibrium models establish the base for this evaluation, each adding its puzzle piece to the urban sustainability discourse and examining the role of non-market-based and market-based policies for balanced growth and welfare improvements in different theory settings. Sustainable urban growth either calls for policy actions or a green energy transition. Further, R&D market failures can pose severe challenges to the sustainability of urban growth and the social optimality of decentralized allocation decisions. Still, a careful (holistic) combination of policy instruments can achieve sustainable growth and even be first best.
In the frame of a world fighting a dramatic global warming caused by human-related activities, research towards the development of renewable energies plays a crucial role. Solar energy is one of the most important clean energy sources and its role in the satisfaction of the global energy demand is set to increase. In this context, a particular class of materials captured the attention of the scientific community for its attractive properties: halide perovskites. Devices with perovskite as light-absorber saw an impressive development within the last decade, reaching nowadays efficiencies comparable to mature photovoltaic technologies like silicon solar cells. Yet, there are still several roadblocks to overcome before a wide-spread commercialization of this kind of devices is enabled. One of the critical points lies at the interfaces: perovskite solar cells (PSCs) are made of several layers with different chemical and physical features. In order for the device to function properly, these properties have to be well-matched.
This dissertation deals with some of the challenges related to interfaces in PSCs, with a focus on the interface between the perovskite material itself and the subsequent charge transport layer. In particular, molecular assemblies with specific properties are deposited on the perovskite surface to functionalize it. The functionalization results in energy level alignment adjustment, interfacial losses reduction, and stability improvement.
First, a strategy to tune the perovskite’s energy levels is introduced: self-assembled monolayers of dipolar molecules are used to functionalize the surface, obtaining simultaneously a shift in the vacuum level position and a saturation of the dangling bonds at the surface. A shift in the vacuum level corresponds to an equal change in work function, ionization energy, and electron affinity. The direction of the shift depends on the direction of the collective interfacial dipole. The magnitude of the shift can be tailored by controlling the deposition parameters, such as the concentration of the solution used for the deposition. The shift for different molecules is characterized by several non-invasive techniques, including in particular Kelvin probe. Overall, it is shown that it is possible to shift the perovskite energy levels in both directions by several hundreds of meV. Moreover, interesting insights on the molecules deposition dynamics are revealed.
Secondly, the application of this strategy in perovskite solar cells is explored. Devices with different perovskite compositions (“triple cation perovskite” and MAPbBr3) are prepared. The two resulting model systems present different energetic offsets at the perovskite/hole-transport layer interface. Upon tailored perovskite surface functionalization, the devices show a stabilized open circuit voltage (Voc) enhancement of approximately 60 meV on average for devices with MAPbBr3, while the impact is limited on triple-cation solar cells. This suggests that the proposed energy level tuning method is valid, but its effectiveness depends on factors such as the significance of the energetic offset compared to the other losses in the devices.
Finally, the above presented method is further developed by incorporating the ability to interact with the perovskite surface directly into a novel hole-transport material (HTM), named PFI. The HTM can anchor to the perovskite halide ions via halogen bonding (XB). Its behaviour is compared to that of another HTM (PF) with same chemical structure and properties, except for the ability of forming XB. The interaction of perovskite with PFI and PF is characterized through UV-Vis, atomic force microscopy and Kelvin probe measurements combined with simulations. Compared to PF, PFI exhibits enhanced resilience against solvent exposure and improved energy level alignment with the perovskite layer. As a consequence, devices comprising PFI show enhanced Voc and operational stability during maximum-power-point tracking, in addition to hysteresis reduction. XB promotes the formation of a high-quality interface by anchoring to the halide ions and forming a stable and ordered interfacial layer, showing to be a particularly interesting candidate for the development of tailored charge transport materials in PSCs.
Overall, the results exposed in this dissertation introduce and discuss a versatile tool to functionalize the perovskite surface and tune its energy levels. The application of this method in devices is explored and insights on its challenges and advantages are given. Within this frame, the results shed light on XB as ideal interaction for enhancing stability and efficiency in perovskite-based devices.
Two-photon polymerization of hydrogels – versatile solutions to fabricate well-defined 3D structures
(2014)
Hydrogels are cross-linked water-containing polymer networks that are formed by physical, ionic or covalent interactions. In recent years, they have attracted significant attention because of their unique physical properties, which make them promising materials for numerous applications in food and cosmetic processing, as well as in drug delivery and tissue engineering. Hydrogels are highly water-swellable materials, which can considerably increase in volume without losing cohesion, are biocompatible and possess excellent tissue-like physical properties, which can mimic in vivo conditions. When combined with highly precise manufacturing technologies, such as two-photon polymerization (2PP), well-defined three-dimensional structures can be obtained. These structures can become scaffolds for selective cell-entrapping, cell/drug delivery, sensing and prosthetic implants in regenerative medicine. 2PP has been distinguished from other rapid prototyping methods because it is a non-invasive and efficient approach for hydrogel cross-linking. This review discusses the 2PP-based fabrication of 3D hydrogel structures and their potential applications in biotechnology. A brief overview regarding the 2PP methodology and hydrogel properties relevant to biomedical applications is given together with a review of the most important recent achievements in the field.
Improving permafrost dynamics in land surface models: insights from dual sensitivity experiments
(2024)
The thawing of permafrost and the subsequent release of greenhouse gases constitute one of the most significant and uncertain positive feedback loops in the context of climate change, making predictions regarding changes in permafrost coverage of paramount importance. To address these critical questions, climate scientists have developed Land Surface Models (LSMs) that encompass a multitude of physical soil processes. This thesis is committed to advancing our understanding and refining precise representations of permafrost dynamics within LSMs, with a specific focus on the accurate modeling of heat fluxes, an essential component for simulating permafrost physics.
The first research question overviews fundamental model prerequisites for the representation of permafrost soils within land surface modeling. It includes a first-of-its-kind comparison between LSMs in CMIP6 to reveal their differences and shortcomings in key permafrost physics parameters. Overall, each of these LSMs represents a unique approach to simulating soil processes and their interactions with the climate system. Choosing the most appropriate model for a particular application depends on factors such as the spatial and temporal scale of the simulation, the specific research question, and available computational resources.
The second research question evaluates the performance of the state-of-the-art Community Land Model (CLM5) in simulating Arctic permafrost regions. Our approach overcomes traditional evaluation limitations by individually addressing depth, seasonality, and regional variations, providing a comprehensive assessment of permafrost and soil temperature dynamics. I compare CLM5's results with three extensive datasets: (1) soil temperatures from 295 borehole stations, (2) active layer thickness (ALT) data from the Circumpolar Active Layer Monitoring Network (CALM), and (3) soil temperatures, ALT, and permafrost extent from the ESA Climate Change Initiative (ESA-CCI). The results show that CLM5 aligns well with ESA-CCI and CALM for permafrost extent and ALT but reveals a significant global cold temperature bias, notably over Siberia. These results echo a persistent challenge identified in numerous studies: the existence of a systematic 'cold bias' in soil temperature over permafrost regions. To address this challenge, the following research questions propose dual sensitivity experiments.
The third research question represents the first study to apply a Plant Functional Type (PFT)-based approach to derive soil texture and soil organic matter (SOM), departing from the conventional use of coarse-resolution global data in LSMs. This novel method results in a more uniform distribution of soil organic matter density (OMD) across the domain, characterized by reduced OMD values in most regions. However, changes in soil texture exhibit a more intricate spatial pattern. Comparing the results to observations reveals a significant reduction in the cold bias observed in the control run. This method shows noticeable improvements in permafrost extent, but at the cost of an overestimation in ALT. These findings emphasize the model's high sensitivity to variations in soil texture and SOM content, highlighting the crucial role of soil composition in governing heat transfer processes and shaping the seasonal variation of soil temperatures in permafrost regions.
Expanding upon a site experiment conducted in Trail Valley Creek by \citet{dutch_impact_2022}, the fourth research question extends the application of the snow scheme proposed by \citet{sturm_thermal_1997} to cover the entire Arctic domain. By employing a snow scheme better suited to the snow density profile observed over permafrost regions, this thesis seeks to assess its influence on simulated soil temperatures. Comparing this method to observational datasets reveals a significant reduction in the cold bias that was present in the control run. In most regions, the Sturm run exhibits a substantial decrease in the cold bias. However, there is a distinctive overshoot with a warm bias observed in mountainous areas. The Sturm experiment effectively addressed the overestimation of permafrost extent in the control run, albeit resulting in a substantial reduction in permafrost extent over mountainous areas. ALT results remain relatively consistent compared to the control run. These outcomes align with our initial hypothesis, which anticipated that the reduced snow insulation in the Sturm run would lead to higher winter soil temperatures and a more accurate representation of permafrost physics.
In summary, this thesis demonstrates significant advancements in understanding permafrost dynamics and its integration into LSMs. It has meticulously unraveled the intricacies involved in the interplay between heat transfer, soil properties, and snow dynamics in permafrost regions. These insights offer novel perspectives on model representation and performance.
Hydraulic-driven fractures play a key role in subsurface energy technologies across several scales. By injecting fluid at high hydraulic pressure into rock with intrinsic low permeability, in-situ stress field and fracture development pattern can be characterised as well as rock permeability can be enhanced. Hydraulic fracturing is a commercial standard procedure for enhanced oil and gas production of rock reservoirs with low permeability in petroleum industry. However, in EGS utilization, a major geological concern is the unsolicited generation of earthquakes due to fault reactivation, referred to as induced seismicity, with a magnitude large enough to be felt on the surface or to damage facilities and buildings. Furthermore, reliable interpretation of hydraulic fracturing tests for stress measurement is a great challenge for the energy technologies. Therefore, in this cumulative doctoral thesis the following research questions are investigated. (1): How do hydraulic fractures grow in hard rock at various scales?; (2): Which parameters control hydraulic fracturing and hydro-mechanical coupling?; and (3): How can hydraulic fracturing in hard rock be modelled?
In the laboratory scale study, several laboratory hydraulic fracturing experiments are investigated numerically using Irazu2D that were performed on intact cubic Pocheon granite samples from South Korea applying different injection protocols. The goal of the laboratory experiments is to test the concept of cyclic soft stimulation which may enable sustainable permeability enhancement (Publication 1).
In the borehole scale study, hydraulic fracturing tests are reported that were performed in boreholes located in central Hungary to determine the in-situ stress for a geological site investigation. At depth of about 540 m, the recorded pressure versus time curves in mica schist with low dip angle foliation show atypical evolution. In order to provide explanation for this observation, a series of discrete element computations using Particle Flow Code 2D are performed (Publication 2).
In the reservoir scale study, the hydro-mechanical behaviour of fractured crystalline rock due to one of the five hydraulic stimulations at the Pohang Enhanced Geothermal site in South Korea is studied. Fluid pressure perturbation at faults of several hundred-meter lengths during hydraulic stimulation is simulated using FracMan (Publication 3).
The doctoral research shows that the resulting hydraulic fracturing geometry will depend “locally”, i.e. at the length scale of representative elementary volume (REV) and below that (sub-REV), on the geometry and strength of natural fractures, and “globally”, i.e. at super-REV domain volume, on far-field stresses. Regarding hydro-mechanical coupling, it is suggested to define separate coupling relationship for intact rock mass and natural fractures. Furthermore, the relative importance of parameters affecting the magnitude of formation breakdown pressure, a parameter characterising hydro-mechanical coupling, is defined. It can be also concluded that there is a clear gap between the capacity of the simulation software and the complexity of the studied problems. Therefore, the computational time of the simulation of complex hydraulic fracture geometries must be reduced while maintaining high fidelity simulation results. This can be achieved either by extending the computational resources via parallelization techniques or using time scaling techniques. The ongoing development of used numerical models focuses on tackling these methodological challenges.
Stimuli-promoted in situ formation of hydrogels with thiol/thioester containing peptide precursors
(2022)
Hydrogels are potential synthetic ECM-like substitutes since they provide functional and structural similarities compared to soft tissues. They can be prepared by crosslinking of macromolecules or by polymerizing suitable precursors. The crosslinks are not necessarily covalent bonds, but could also be formed by physical interactions such as π-π interactions, hydrophobic interactions, or H-bonding. On demand in situ forming hydrogels have garnered increased interest especially for biomedical applications over preformed gels due to the relative ease of in vivo delivery and filling of cavities. The thiol-Michael addition reaction provides a straightforward and robust strategy for in situ gel formation with its fast reaction kinetics and ability to proceed under physiological conditions. The incorporation of a trigger function into a crosslinking system becomes even more interesting since gelling can be controlled with stimulus of choice. The use of small molar mass crosslinker precursors with active groups orthogonal to thiol-Michael reaction type electrophile provides the opportunity to implement an on-demand in situ crosslinking without compromising the fast reaction kinetics.
It was postulated that short peptide sequences due to the broad range structural-function relations available with the different constituent amino acids, can be exploited for the realisation of stimuli-promoted in situ covalent crosslinking and gelation applications. The advantages of this system over conventional polymer-polymer hydrogel systems are the ability tune and predict material property at the molecular level.
The main aim of this work was to develop a simplified and biologically-friendly stimuli-promoted in situ crosslinking and hydrogelation system using peptide mimetics as latent crosslinkers. The approach aims at using a single thiodepsipeptide sequence to achieve separate pH- and enzyme-promoted gelation systems with little modification to the thiodepsipeptide sequence. The realization of this aim required the completion of three milestones.
In the first place, after deciding on the thiol-Michael reaction as an effective in situ crosslinking strategy, a thiodepsipeptide, Ac-Pro-Leu-Gly-SLeu-Leu-Gly-NEtSH (TDP) with expected propensity towards pH-dependent thiol-thioester exchange (TTE) activation, was proposed as a suitable crosslinker precursor for pH-promoted gelation system. Prior to the synthesis of the proposed peptide-mimetic, knowledge of the thiol-Michael reactivity of the would-be activated thiol moiety SH-Leu, which is internally embedded in the thiodepsipeptide was required. In line with pKa requirements for a successful TTE, the reactivity of a more acidic thiol, SH-Phe was also investigated to aid the selection of the best thiol to be incorporated in the thioester bearing peptide based crosslinker precursor. Using ‘pseudo’ 2D-NMR investigations, it was found that only reactions involving SH-Leu yielded the expected thiol-Michael product, an observation that was attributed to the steric hindrance of the bulkier nature of SH-Phe. The fast reaction rates and complete acrylate/maleimide conversion obtained with SH-Leu at pH 7.2 and higher aided the direct elimination of SH-Phe as a potential thiol for the synthesis of the peptide mimetic.
Based on the initial studies, for the pH-promoted gelation system, the proposed Ac-Pro-Leu-Gly-SLeu-Leu-Gly-NEtSH was kept unmodified. The subtle difference in pKa values between SH-Leu (thioester thiol) and the terminal cysteamine thiol from theoretical conditions should be enough to effect a ‘pseudo’ intramolecular TTE. In polar protic solvents and under basic aqueous conditions, TDP successfully undergoes a ‘pseudo’ intramolecular TTE reaction to yield an α,ω-dithiol tripeptide, HSLeu-Leu-Gly-NEtSH. The pH dependence of thiolate ion generation by the cysteamine thiol aided the incorporation of the needed stimulus (pH) for the overall success of TTE (activation step) – thiol-Michael addition (crosslinking) strategy.
Secondly, with potential biomedical applications in focus, the susceptibility of TDP, like other thioesters, to intermolecular TTE reaction was probed with a group of thiols of varying thiol pKa values, since biological milieu characteristically contain peptide/protein thiols. L-cysteine, which is a biologically relevant thiol, and a small molecular weight thiol, methylthioglycolate both with relatively similar thiol pKa, values, led to an increase concentration of the dithiol crosslinker when reacted with TDP. In the presence of acidic thiols (p-NTP and 4MBA), a decrease in the dithiol concentration was observed, an observation that can be attributed to the inability of the TTE tetrahedral intermediate to dissociate into exchange products and is in line with pKa requirements for successful TTE reaction. These results additionally makes TDP more attractive and the potentially the first crosslinker precursor for applications in biologically relevant media.
Finally, the ability of TDP to promote pH-sensitive in situ gel formation was probed with maleimide functionalized 4-arm polyethylene glycol polymers in tris-buffered media of varying pHs. When a 1:1 thiol: maleimide molar ratio was used, TDP-PEG4MAL hydrogels formed within 3, 12 and 24 hours at pH values of 8.5, 8.0 and 7.5 respectively. However, gelation times of 3, 5 and 30 mins were observed for the same pH trend when the thiol: maleimide molar was increased to 2:1.
A direct correlation of thiol content with G’ of the gels at each pH could also be drawn by comparing gels with thiol: maleimide ratios of 1:1 to those with 2:1 thiol: maleimide mole ratios. This is supported by the fact that the storage modulus (G') is linearly dependent on the crosslinking density of the polymer. The values of initial G′ for all gels ranged between (200 – 5000 Pa), which falls in the range of elasticities of certain tissue microenvironments for example brain tissue 200 – 1000 Pa and adipose tissue (2500 – 3500 Pa).
Knowledge so far gained from the study on the ability to design and tune the exchange reaction of thioester containing peptide mimetic will give those working in the field further insight into the development of new sequences tailored towards specific applications.
TTE substrate design using peptide mimetic as presented in this work has revealed interesting new insights considering the state-of-the-art. Using the results obtained as reference, the strategy provides a possibility to extend the concept to the controlled delivery of active molecules needed for other robust and high yielding crosslinking reactions for biomedical applications. Application for this sequentially coupled functional system could be seen e.g. in the treatment of inflamed tissues associated with urinary tract like bladder infections for which pH levels above 7 were reported. By the inclusion of cell adhesion peptide motifs, the hydrogel network formed at this pH could act as a new support layer for the healing of damage epithelium as shown in interfacial gel formation experiments using TDP and PEG4MAL droplets.
The versatility of the thiodepsipeptide sequence, Ac-Pro-Leu-Gly-SLeu-Leu-Gly-(TDPo) was extended for the design and synthesis of a MMP-sensitive 4-arm PEG-TDPo conjugate. The purported cleavage of TDPo at the Gly-SLeu bond yields active thiol units for subsequent reaction of orthogonal Michael acceptor moieties. One of the advantages of stimuli-promoted in situ crosslinking systems using short peptides should be the ease of design of required peptide molecules due to the predictability of peptide functions their sequence structure. Consequently the functionalisation of a 4-arm PEG core with the collagenase active TDPo sequence yielded an MMP-sensitive 4-arm thiodepsipeptide-PEG conjugate (PEG4TDPo) substrate.
Cleavage studies using thiol flourometric assay in the presence of MMPs -2 and -9 confirmed the susceptibility of PEG4TDPo towards these enzymes. The resulting time-dependent increase in fluorescence intensity in the presence of thiol assay signifies the successful cleavage of TDPo at the Gly-SLeu bond as expected. It was observed that the cleavage studies with thiol flourometric assay introduces a sigmoid non-Michaelis-Menten type kinetic profile, hence making it difficult to accurately determine the enzyme cycling parameters, kcat and KM .
Gelation studies with PEG4MAL at 10 % wt. concentrations revealed faster gelation with MMP-2 than MMP-9 with 28 and 40 min gelation times respectively. Possible contributions by hydrolytic cleavage of PEG4TDPo has resulted in the gelation of PEG4MAL blank samples but only after 60 minutes of reaction. From theoretical considerations, the simultaneous gelation reaction would be expected to more negatively impact the enzymatic than hydrolytic cleavage. The exact contributions from hydrolytic cleavage of PEG4TDPo would however require additional studies.
In summary this new and simplified in situ crosslinking system using peptide-based crosslinker precursors with tuneable properties exhibited in situ crosslinking gelation kinetics on similar levels with already active dithiols reported. The advantageous on-demand functionality associated with its pH-sensitivity and physiological compatibility makes it a strong candidate worth further research as biomedical applications in general and on-demand material synthesis is concerned.
Results from MMP-promoted gelation system unveils a simple but unexplored approach for in situ synthesis of covalently crosslinked soft materials, that could lead to the development of an alternative pathway in addressing cancer metastasis by making use of MMP overexpression as a trigger. This goal has so far not being reach with MMP inhibitors despite the extensive work this regard.
In my doctoral thesis, I examine continuous gravity measurements for monitoring of the geothermal site at Þeistareykir in North Iceland. With the help of high-precision superconducting gravity meters (iGravs), I investigate underground mass changes that are caused by operation of the geothermal power plant (i.e. by extraction of hot water and reinjection of cold water). The overall goal of this research project is to make a statement about the sustainable use of the geothermal reservoir, from which also the Icelandic energy supplier and power plant operator Landsvirkjun should benefit.
As a first step, for investigating the performance and measurement stability of the gravity meters, in summer 2017, I performed comparative measurements at the gravimetric observatory J9 in Strasbourg. From the three-month gravity time series, I examined calibration, noise and drift behaviour of the iGravs in comparison to stable long-term time series of the observatory superconducting gravity meters. After preparatory work in Iceland (setup of gravity stations, additional measuring equipment and infrastructure, discussions with Landsvirkjun and meetings with the Icelandic partner institute ISOR), gravity monitoring at Þeistareykir was started in December 2017. With the help of the iGrav records of the initial 18 months after start of measurements, I carried out the same investigations (on calibration, noise and drift behaviour) as in J9 to understand how the transport of the superconducting gravity meters to Iceland may influence instrumental parameters.
In the further course of this work, I focus on modelling and reduction of local gravity contributions at Þeistareykir. These comprise additional mass changes due to rain, snowfall and vertical surface displacements that superimpose onto the geothermal signal of the gravity measurements. For this purpose, I used data sets from additional monitoring sensors that are installed at each gravity station and adapted scripts for hydro-gravitational modelling. The third part of my thesis targets geothermal signals in the gravity measurements.
Together with my PhD colleague Nolwenn Portier from France, I carried out additional gravity measurements with a Scintrex CG5 gravity meter at 26 measuring points within the geothermal field in the summers of 2017, 2018 and 2019. These annual time-lapse gravity measurements are intended to increase the spatial coverage of gravity data from the three continuous monitoring stations to the entire geothermal field. The combination of CG5 and iGrav observations, as well as annual reference measurements with an FG5 absolute gravity meter represent the hybrid gravimetric monitoring method for Þeistareykir. Comparison of the gravimetric data to local borehole measurements (of groundwater levels, geothermal extraction and injection rates) is used to relate the observed gravity changes to the actually extracted (and reinjected) geothermal fluids. An approach to explain the observed gravity signals by means of forward modelling of the geothermal production rate is presented at the end of the third (hybrid gravimetric) study. Further modelling with the help of the processed gravity data is planned by Landsvirkjun. In addition, the experience from time-lapse and continuous gravity monitoring will be used for future gravity measurements at the Krafla geothermal field 22 km south-east of Þeistareykir.