92-XX BIOLOGY AND OTHER NATURAL SCIENCES
Refine
Year of publication
Document Type
- Doctoral Thesis (48)
- Bachelor Thesis (1)
- Conference Proceeding (1)
- Habilitation Thesis (1)
Is part of the Bibliography
- yes (51)
Keywords
- Biodiversität (3)
- Klimawandel (3)
- climate change (3)
- ecology (3)
- Ökologie (3)
- Adipositas (2)
- Epigenetik (2)
- Landschaft der Angst (2)
- Metabolomics (2)
- Photosynthese (2)
Institute
- Institut für Biochemie und Biologie (26)
- Institut für Chemie (7)
- Institut für Ernährungswissenschaft (6)
- Institut für Geowissenschaften (5)
- Extern (4)
- Institut für Physik und Astronomie (3)
- Institut für Mathematik (2)
- Institut für Umweltwissenschaften und Geographie (1)
- Strukturbereich Kognitionswissenschaften (1)
Sekundäre Pflanzenstoffe und ihre gesundheitsfördernden Eigenschaften sind in den letzten zwei Jahrzehnten vielfach ernährungsphysiologisch untersucht und spezifische positive Effekte im humanen Organismus zum Teil sehr genau beschrieben worden. Zu den Carotinoiden zählend ist der sekundäre Pflanzenstoff Lutein insbesondere in der Prävention von ophthalmologischen Erkrankungen in den Mittelpunkt der Forschung gerückt. Das ausschließlich von Pflanzen und einigen Algen synthetisierte Xanthophyll wird über die pflanzliche Nahrung insbesondere grünes Blattgemüse in den humanen Organismus aufgenommen. Dort akkumuliert es bevorzugt im Makulapigment der Retina des menschlichen Auges und ist bedeutend im Prozess der Aufrechterhaltung der Funktionsfähigkeit der Photorezeptorzellen. Im Laufe des Alterns kann die Abnahme der Dichte des Makulapigments und der Abbau von Lutein beobachtet werden. Die dadurch eintretende Destabilisierung der Photorezeptorzellen im Zusammenhang mit einer veränderten Stoffwechsellage im alternden Organismus kann zur Ausprägung der altersbedingten Makuladegeneration (AMD) führen. Die pathologische Symptomatik der Augenerkrankung reicht vom Verlust der Sehschärfe bis hin zum irreversiblen Erblinden. Da therapeutische Mittel ausschließlich ein Fortschreiten verhindern, bestehen hier Forschungsansätze präventive Maßnahmen zu finden. Die Supplementierung von luteinhaltigen Präparaten bietet dabei einen Ansatzpunkt. Auf dem Markt finden sich bereits Nahrungsergänzungsmittel (NEM) mit Lutein in verschiedenen Applikationen. Limitierend ist dabei die Stabilität und Bioverfügbarkeit von Lutein, welches teilweise kostenintensiv und mit unbekannter Reinheit zu erwerben ist. Aus diesem Grund wäre die Verwendung von Luteinestern als die pflanzliche Speicherform des Luteins im Rahmen eines NEMs vorteilhaft. Neben ihrer natürlichen, höheren Stabilität sind Luteinester nachhaltig und kostengünstig einsetzbar.
In dieser Arbeit wurden physikochemische und ernährungsphysiologisch relevante Aspekte in dem Produktentwicklungsprozess eines NEMs mit Luteinestern in einer kolloidalen Formulierung untersucht. Die bisher einzigartige Anwendung von Luteinestern in einem Mundspray sollte die Aufnahme des Wirkstoffes insbesondere für ältere Menschen erleichtern und verbessern. Unter Beachtung der Ergebnisse und der ernährungsphysiologischen Bewertung sollten u.a. Empfehlungen für die Rezepturzusammensetzungen einer Miniemulsion (Emulsion mit Partikelgrößen <1,0 µm) gegeben werden. Eine Einschätzung der Bioverfügbarkeit der Luteinester aus den entwickelten, kolloidalen Formulierungen konnte anhand von Studien zur Resorption- und Absorptionsverfügbarkeit in vitro ermöglicht werden.
In physikalischen Untersuchungen wurden zunächst Basisbestandteile für die Formulierungen präzisiert. In ersten wirkstofffreien Musteremulsionen konnten ausgewählte Öle als Trägerphase sowie Emulgatoren und Löslichkeitsvermittler (Peptisatoren) hinsichtlich ihrer Eignung zur Bereitstellung einer Miniemulsion physikalisch geprüft werden. Die beste Stabilität und optimale Eigenschaften einer Miniemulsion zeigten sich bei der Verwendung von MCT-Öl (engl. medium chain triglyceride) bzw. Rapsöl in der Trägerphase sowie des Emulgators Tween® 80 (Tween 80) allein oder in Kombination mit dem Molkenproteinhydrolysat Biozate® 1 (Biozate 1).
Aus den physikalischen Untersuchungen der Musteremulsionen gingen die Präemulsionen als Prototypen hervor. Diese enthielten den Wirkstoff Lutein in verschiedenen Formen. So wurden Präemulsionen mit Lutein, mit Luteinestern sowie mit Lutein und Luteinestern konzipiert, welche den Emulgator Tween 80 oder die Kombination mit Biozate 1 enthielten. Bei der Herstellung der Präemulsionen führte die Anwendung der Emulgiertechniken Ultraschall mit anschließender Hochdruckhomogenisation zu den gewünschten Miniemulsionen. Beide eingesetzten Emulgatoren boten optimale Stabilisierungseffekte. Anschließend erfolgte die physikochemische Charakterisierung der Wirkstoffe. Insbesondere Luteinester aus Oleoresin erwiesen sich hier als stabil gegenüber verschiedenen Lagerungsbedingungen. Ebenso konnte bei einer kurzzeitigen Behandlung der Wirkstoffe unter spezifischen mechanischen, thermischen, sauren und basischen Bedingungen eine Stabilität von Lutein und Luteinestern gezeigt werden. Die Zugabe von Biozate 1 bot dabei nur für Lutein einen zusätzlichen Schutz. Bei längerer physikochemischer Behandlung unterlagen die in den Miniemulsionen eingebrachten Wirkstoffe moderaten Abbauvorgängen. Markant war deren Sensitivität gegenüber dem basischen Milieu. Im Rahmen der Rezepturentwicklung des NEMs war hier die Empfehlung, eine Miniemulsion mit einem leicht saurem pH-Milieu zum Schutz des Wirkstoffes durch kontrollierte Zugabe weiterer Inhaltstoffe zu gestalten.
Im weiteren Entwicklungsprozess des NEMs wurden Fertigrezepturen mit dem Wirkstoff Luteinester aufgestellt. Die alleinige Anwendung des Emulgators Biozate 1 zeigte sich dabei als ungeeignet. Die weiterhin zur Verfügung stehenden Fertigrezepturen enthielten in der Öl-phase neben dem Wirkstoff das MCT-ÖL oder Rapsöl sowie a-Tocopherol zur Stabilisierung. Die Wasserphase bestand aus dem Emulgator Tween 80 oder einer Kombination aus Tween 80 und Biozate 1. Zusatzstoffe waren zudem als mikrobiologischer Schutz Ascorbinsäure und Kaliumsorbat sowie für sensorische Effekte Xylitol und Orangenaroma. Die Anordnung der Basisrezeptur und das angewendete Emulgierverfahren lieferten stabile Miniemulsionen. Weiterhin zeigten langfristige Lagerungsversuche mit den Fertigrezepturen bei 4°C, dass eine Aufrechterhaltung der geforderten Luteinestermenge im Produkt gewährleistet war. Analoge Untersuchungen an einem luteinhaltigen, marktgängigen Präparat bestätigten dagegen eine bereits bei kurzfristiger Lagerung auftretende Instabilität von Lutein.
Abschließend wurde durch Resorptions- und Absorptionsstudien in vitro mit den Präemulsionen und Fertigrezepturen die Bioverfügbarkeit von Luteinestern geprüft. Nach Behandlung in einem etablierten in vitro Verdaumodell konnte eine geringfügige Resorptionsverfügbarkeit der Luteinester definiert werden. Limitiert war eine Micellarisierung des Wirkstoffes aus den konzipierten Formulierungen zu beobachten. Eine enzymatische Spaltung der Luteinester zu freiem Lutein wurde nur begrenzt festgestellt. Spezifität und Aktivität von entsprechenden hydrolytischen Lipasen sind als äußerst gering gegenüber Luteinestern zu bewerten. In sich anschließenden Zellkulturversuchen mit der Zelllinie Caco-2 wurden keine zytotoxischen Effekte durch die relevanten Inhaltsstoffe in den Präemulsionen gezeigt. Dagegen konnten eine Sensibilität gegenüber den Fertigrezepturen beobachtet werden. Diese sollte im Zusammenhang mit Irritationen der Schleimhäute des Magen-Darm-Traktes bedacht werden. Eine weniger komplexe Rezeptur könnte die beobachteten Einschränkungen möglicherweise minimieren. Abschließende Absorptionsstudien zeigten, dass grundsätzlich eine geringfügige Aufnahme von vorrangig Lutein, aber auch Luteinmonoestern in den Enterocyten aus Miniemulsionen erfolgen kann. Dabei hatte weder Tween 80 noch Biozate 1 einen förderlichen Einfluss auf die Absorptionsrate von Lutein oder Luteinestern. Die Metabolisierung der Wirkstoffe durch vorherigen in vitro-Verdau steigerte die zelluläre Aufnahme von Wirkstoffen aus Formulierungen mit Lutein und Luteinestern gleichermaßen. Die beobachtete Aufnahme von Lutein und Luteinmonoestern in den Enterocyten scheint über passive Diffusion zu erfolgen, wobei auch der aktive Transport nicht ausgeschlossen werden kann. Dagegen können Luteindiester aufgrund ihrer Molekülgröße nicht über den Weg der Micellarisierung und einfachen Diffusion in die Enterocyten gelangen. Ihre Aufnahme in die Dünndarmepithelzellen bedarf einer vorherigen hydrolytischen Spaltung durch spezifische Lipasen. Dieser Schritt limitiert wiederum die effektive Aufnahme der Luteinester in die Zellen bzw. stellt eine Einschränkung in ihrer Bioverfügbarkeit im Vergleich zu freiem Lutein dar.
Zusammenfassend konnte für die physikochemisch stabilen Luteinester eine geringe Bioverfügbarkeit aus kolloidalen Formulierungen gezeigt werden. Dennoch ist die Verwendung als Wirkstoffquelle für den sekundären Pflanzenstoff Lutein in einem NEM zu empfehlen. Im Zusammenhang mit der Aufnahme von luteinreichen, pflanzlichen Lebensmitteln kann trotz der zu erwartenden geringen Bioverfügbarkeit der Luteinester aus dem NEM ein Beitrag zur Verbesserung des Luteinstatus erreicht werden. Entsprechende Publikationen zeigten eindeutige Korrelationen zwischen der Aufnahme von luteinesterhaltigen Präparaten und einem Anstieg der Luteinkonzentration im Serum bzw. der Makulapigmentdichte in vivo. Die geringfügig bessere Bioverfügbarkeit von freiem Lutein steht im kritischen Zusammenhang mit seiner Instabilität und Kostenintensität. Bilanzierend wurde im Rahmen dieser Arbeit das marktgängige Produkt Vita Culus® konzipiert. Im Ausblick sollten humane Interventionsstudien mit dem NEM die abschließende Bewertung der Bioverfügbarkeit von Luteinestern aus dem Präparat möglich machen.
As the ongoing trend of developing smart materials that can reversibly switch geometry stimulated by environmental control addressed increasing attention in many research fields, especially for biomedical or soft robotic applications. Shape-memory polymers (SMPs), which can change shape, stiffness, size, and structure when exposed to an external stimulus, are intensively explored as encouraging material candidates for achieving multifunctionality, and for miniaturizing into micro-components to expand the applications. Besides, the geometrical design has gained growing attention for creating engineering applications, such as bi-stable mechanisms, and has the potential to be explored by implementing SMP for new functions. In this context, this thesis aimed to develop smart micro-/nano-objects based on SMP and explore new functions by geometrical design using SMP. Here, two types of stimuli-responsive objects capable of one-way temperature-memory effect (TME) or free-standing reversible actuation e.g., micro/nanofibers (i) and microcuboids (ii) at different aspects were explored. At first, it was hypothesized that the advanced atomic force microscopy (AFM) platform can be established to study individual polymeric micro-/nanofibers (i) in terms of incorporation and characterization of a reversible shape-memory actuation capability. Crystallizable material was chosen for preparing the fibers and the molecular alignment within the fibers among different diameters will influence the crystallization-induced elongation during cooling that determined the reversible effect. For the second type, microcuboids (ii), it was hypothesized that a programming and quantification approach can be developed to enable the realization and characterization of a one-way micro-TME and micro-shape-memory polymer actuation (SMPA) in microcuboids. The responsive temperature of one-way shape transformation can be tuned by programming temperature (Tp) and the separation temperature (Tsep) for post-programming can influence the actuation. Finally, a geometrical design with bi-stability was combined with SME to create new functions of shape actuation. It was hypothesized that the predicted bi-stable or mono-stable structures can be achieved with the aid of digital fabrication methods. Using shape-memory effect (SME), the alteration of bi-stable and mono-stable can initiate shape transformation with a larger magnitude and higher energy output.
In the first part, the method to quantify the reversible SMPA of a single micro/nano crystallizable fiber with geometry change during the actuation was explored. Electrospinning was used to prepare poly (ε-caprolactone) (PCL) micro/nanofiber with different diameters, which were fixed by UV glue and crosslinked on the structured silicon wafer. Using AFM, the programming, as well as the observation of recovery and reversible displacement of the fiber, were performed by vertical three-point bending at the free suspended part. A plateau tip was chosen to achieve stable contact and longer working distance for performing larger deformation, enabling intensified reversible SMPA of single fibers. In this way, programming strains of 39 ± 1% or 46 ± 1% were realized for fiber with a diameter of 1 ± 0.2 µm and 300 ± 50 nm, which were bent at 80 °C and fixed at 10 °C. Values for the reversible elongation of εrev = 3.4 ± 0.1% and 10.5 ± 0.1% were obtained for a single micro and nanofiber respectively between 10 and 60 °C. The higher actuation effect observed for nanofiber demonstrated that the highly compact and oriented crystallites in nanofibers, which determined the pronounced εrev compared to the thick microfibers. Besides, a stable reversible actuation of a nanofiber can be tracked by AFM tip up to 10 cycles, indicating a sustainable application can be achieved on the fiber actuators. The findings obtained for cPCL micro-/nano-fibers will help design and evaluate the next generation polymeric microactuators or micromanipulators.
The second part of the thesis studies the shape-memory effect (SME) of a single individual SMP micro-object by controlling deformation temperatures during programming and actuation temperatures during reversible change. In this work, microcuboids of crosslinked poly[ethylene-co-(vinyl acetate)] (cPEVA) elastomers with 18 wt% vinyl acetate (VA) contents were successfully prepared by template-based replication from polydimethylsiloxane (PDMS) mold. The micro-TME and micro-SMPA were observed and studied based on micro-geometry change using optical microscopy (OM) and AFM. Different switching temperatures of shape recovery were achieved from 55 °C to 86 °C by tuning Tp from 55 °C to 100 °C, indicating a successful implementation of micro-TME on individual microcuboid. For micro-SMPA functionalization, microcuboids were deformed by compression at 100 °C and the change in single particle height was monitored during cyclic heating and cooling between various Tseps from 60 °C to 85 °C and 20 °C. The micro-SMPA on a single microcuboid was achieved with a reversible strain in the range of 2 to 7%, whereby higher compression ratio CR and Tsep induced prominent reversible strain. The results achieved in this work demonstrated the successful functionalization of microcuboids with different SMEs by controlling temperatures during programming and actuation processes. Based on these achievements, such micro-objects can be further designed as on demand switchable microactuators or release systems with adjustable working temperatures.
In the last part of the work, a new function of shape-memory polymeric bi-stable 3D structured film was designed and fabricated. The SME and geometrical design of compliant mechanics were merged to enable switching between bi-stable and mono-stable states, which generate snap movement that mimics the Venus flytrap. A truncated tetrahedron structure with a slope angle as a tunable parameter to alter the bi-stability was chosen for the study to combine with
SME. It was anticipated that the structured film designed with a slope angle of 30° exhibited mono-stable behavior, and such a structure with a slope angle of 45° exhibited bi-stable behavior. Then the structured SMP film of designed mono-stable shape was successfully fabricated using soft lithography based on 3D printed master molds supported from digital manufacturing. The structured mold was also used in programming the SMP film into the structure with a higher slope angle to attain bi-stability. Finally, the switching between bi-stable and mono-stable states was successfully realized using SME, which introduces snapping movement triggered by heat. The implementation of compliant mechanisms by the SME increased the magnitude of thermally induced reconfiguration without additional external force.
To sum up, the results of the thesis support the development of smart objects capable of one-way micro-TME, free-standing reversible actuation, or bi-stability mediated shape-memory reconfiguration. Electrospinning and template-based method were used for fabrication with good control of geometry and low size dispersity. Microscopy methods especially the AFM platform with decent sensitivity was developed for implementation as well as characterization of SME on individual micro-/nanoobjects. Implementation of bi-stability improves the shape transformation amplitude of thermally triggered SMP. These findings can give novel insights for designing polymer-based actuators or soft robotics.
Estuarine marshes are ecosystems that are situated at the transition zone between land and water and are thus controlled by physical and biological interactions. Marsh vegetation offers important ecosystem services by filtrating solid and dissolved substances from the water and providing habitat. By buffering a large part of the arriving flow velocity, attenuating wave energy and serving as erosion control for riverbanks, tidal marshes furthermore reduce the destructive effects of storm surges and storm waves and thus contribute to ecosystem-based shore protection. However, in many estuaries, extensive embankments, artificial bank protection, river dredging and agriculture threaten tidal marshes. Global warming might entail additional risks, such as changes in water levels, an increase of the tidal amplitude and a resulting shift of the salinity zones. This can affect the dynamics of the shore and foreland vegetation, and vegetation belts can be narrowed or fragmented. Against this background, it is crucial to gain a better understanding of the processes underlying the spatio temporal vegetation dynamics in brackish marshes. Furthermore, a better understanding of how plant-habitat relationships generate patterns in tidal marsh vegetation is vital to maintain ecosystem functions and assess the response of marshes to environmental change as well as the success of engineering and restoration projects.
For this purpose, three research objectives were addressed within this thesis: (1) to explore the possibility of vegetation serving as self-adaptive shore protection by quantifying the reduction of current velocity in the vegetation belt and the morphologic plasticity of a brackish marsh pioneer, (2) to disentangle the roles of abiotic factors and interspecific competition on species distribution and stand characteristics in brackish marshes, and (3) to develop a mechanistic vegetation model that helps analysing the influence of habitat conditions on the spatio-temporal dynamic of tidal marsh vegetation. These aspects were investigated using a combination of field studies and statistical as well as process-based modelling.
To explore the possibility of vegetation serving as self-adaptive coastal protection, in the first study, we measured current velocity with and without living vegetation, recorded ramet density and plant thickness during two growing periods at two locations in the Elbe estuary and assessed the adaptive value of a larger stem diameter of plants at locations with higher mechanical stress by biomechanical measurements. The results of this study show that under non-storm conditions, the vegetation belt of the marsh pioneer Bolboschoenus maritimus is able to buffer a large proportion of the flow velocity. We were furthermore able to show that morphological traits of plant species are adapted to hydrodynamic forces by demonstrating a positive correlation between ramet thickness and cross-shore current. In addition, our measurements revealed that thicker ramets growing at the front of the vegetation belt have a significantly higher stability than ramets inside the vegetation belt. This self-adaptive effect improves the ability of B. maritimus to grow and persist in the pioneer zone and could provide an adaptive value in habitats with high mechanical stress.
In the second study, we assessed the distribution of the two marsh species and a set of stand characteristics, namely aboveground and belowground biomass, ramet density, ramet height and the percentage of flowering ramets. Furthermore, we collected information on several abiotic habitat factors to test their effect on plant growth and zonation with generalised linear models (GLMs). Our results demonstrate that flow velocity is the main factor controlling the distribution of Bolboschoenus maritimus and Phragmites australis. Additionally, inundation height and duration, as well as intraspecific competition affect distribution patterns. This study furthermore shows that cross-shore flow velocity does not only directly influence the distribution of the two marsh species, but also alters the plants’ occurrence relative to inun-dation height and duration. This suggests an effect of cross-shore flow velocity on their tolerance to inundation. The analysis of the measured stand characteristics revealed a negative effect of total flow velocity on all measured parameters of B. maritimus and thus confirmed our expectation that flow velocity is a decisive stressor which influences the growth of this species.
To gain a better understanding of the processes and habitat factors influencing the spatio-temporal vegetation dynamics in brackish marshes, I built a spatially explicit, mechanistic model applying a pattern-oriented modelling approach. A sensitivity analysis of the para-meters of this dynamic habitat-macrophyte model HaMac suggests that rhizome growth is the key process for the lateral dynamics of brackish marshes. From the analysed habitat factors, P. australis patterns were mainly influenced by flow velocity. The competition with P. australis was of key importance for the belowground biomass of B. maritimus. Concerning vegetation dynamics, the model results emphasise that without the effect of flow velocity the B. maritimus vegetation belt would expand into the tidal flat at locations with present vegetation recession, suggesting that flow velocity is the main reason for vegetation recession at exposed locations.
Overall, the results of this thesis demonstrate that brackish marsh vegetation considerably contributes to flow reduction under average flow conditions and can hence be a valuable component of shore-protection schemes. At the same time, the distribution, growth and expansion of tidal marsh vegetation is substantially influenced by flow. Altogether, this thesis provides a clear step forward in understanding plant-habitat interactions in tidal marshes. Future research should integrate studies of vertical marsh accretion with research on the factors that control the lateral position of marshes.
This dissertation was carried out as part of the international and interdisciplinary graduate school StRATEGy. This group has set itself the goal of investigating geological processes that take place on different temporal and spatial scales and have shaped the southern central Andes. This study focuses on claystones and carbonates of the Yacoraite Fm. that were deposited between Maastricht and Dan in the Cretaceous Salta Rift Basin. The former rift basin is located in northwest Argentina and is divided into the sub-basins Tres Cruces, Metán-Alemanía and Lomas de Olmedo. The overall motivation for this study was to gain new knowledge about the evolution of marine and lacustrine conditions during the Yacoraite Fm. Deposit in the Tres Cruces and Metán-Alemanía sub-basins. Other important aspects that were examined within the scope of this dissertation are the conversion of organic matter from Yacoraite Fm. into oil and its genetic relationship to selected oils produced and natural oil spills. The results of my study show that the Yacoraite Fm. began to be deposited under marine conditions and that a lacustrine environment developed by the end of the deposition in the Tres Cruces and Metán-Alemanía Basins. In general, the kerogen of Yacoraite Fm. consists mainly of the kerogen types II, III and II / III mixtures. Kerogen type III is mainly found in samples from the Yacoraite Fm., whose TOC values are low. Due to the adsorption of hydrocarbons on the mineral surfaces (mineral matrix effect), the content of type III kerogen with Rock-Eval pyrolysis in these samples could be overestimated. Investigations using organic petrography show that the organic particles of Yacoraite Fm. mainly consist of alginites and some vitrinite-like particles. The pyrolysis GC of the rock samples showed that the Yacoraite Fm. generates low-sulfur oils with a predominantly low-wax, paraffinic-naphthenic-aromatic composition and paraffinic wax-rich oils. Small proportions of paraffinic, low-wax oils and a gas condensate-generating facies are also predicted. Here, too, mineral matrix effects were taken into account, which can lead to a quantitative overestimation of the gas-forming character.
The results of an additional 1D tank modeling carried out show that the beginning (10% TR) of the oil genesis took place between ≈10 Ma and ≈4 Ma. Most of the oil (from ≈50% to 65%) was generated prior to the development of structural traps formed during the Plio-Pleistocene Diaguita deformation phase. Only ≈10% of the total oil generated was formed and potentially trapped after the formation of structural traps. Important factors in the risk assessment of this petroleum system, which can determine the small amounts of generated and migrated oil, are the generally low TOC contents and the variable thickness of the Yacoraite Fm. Additional risks are associated with a low density of information about potentially existing reservoir structures and the quality of the overburden.
The self-assembly of amphiphilic polymers in aqueous systems is important for a plethora of applications, in particular in the field of cosmetics and detergents. When introducing thermoresponsive blocks, the aggregation behavior of these polymers can be controlled by changing the temperature. While confined to simple diblock copolymer systems for long, the complexity - and thus the versatility - of such smart systems can be strongly enlarged, once designed monomers, specific block sizes, different architectures, or additional functional groups such as hydrophobic stickers are implemented. In this work, the structure-property relationship of such thermoresponsive amphiphilic block copolymers was investigated by varying their structure systematically. The block copolymers were generally composed of a permanently hydrophobic sticker group, a permanently hydrophilic block, and a thermoresponsive block exhibiting a Lower Critical Solution Temperature (LCST) behavior. While the hydrophilic block consisted of N,N dimethylacrylamide (DMAm), different monomers were used for the thermoresponsive block, such as N n propylacrylamide (NPAm), N iso propylacrylamide (NiPAm), N,N diethylacrylamide (DEAm), N,N bis(2 methoxyethyl)acrylamide (bMOEAm), or N acryloylpyrrolidine (NAP) with different reported LCSTs of 25, 32, 33, 42 and 56 °C, respectively. The block copolymers were synthesized by successive reversible addition fragmentation chain transfer (RAFT) polymerization. For the polymers with the basic linear, the twinned hydrophobic and the symmetrical quasi miktoarm architectures, the results were well defined block sizes and end groups as well as narrow molar mass distributions (Ɖ ≤ 1.3). More complex architectures, such as the twinned thermoresponsive and the non-symmetrical quasi miktoarm one, were achieved by combining RAFT polymerization with a second technique, namely atom transfer radical polymerization (ATRP) or single unit monomer insertion (SUMI), respectively. The obtained block copolymers showed well defined block sizes, but due to the complexity of these reaction paths, the dispersities were generally higher (Ɖ ≤ 1.8) and some end groups were lost.
The thermoresponsive behavior of the block copolymers was investigated by turbidimetry and dynamic light scattering (DLS). Below the phase transition temperature, the polymers were soluble in water and small micellar structures were visible. However, above the phase transition temperature, the aggregation behavior was strongly dependent on the architecture and the chemical structure of the thermoresponsive block. Thermoresponsive blocks comprising PNAP and PbMOEAm with DPn = 40 showed no cloud point (CP), since their already high LCSTs were further increased by the attached hydrophilic block. Depending on the architecture as well as on the block size, block copolymers with PNiPAm, PDEAm and PNPAm showed different CP’s. Large aggregates were visible for block copolymers with PNiPAm and PDEAm above their CP. For PNPAm containing block copolymers, the phase transition was very sensitive towards the architecture resulting in either small or large aggregates.
In addition, fluorescence studies were performed using PDMAm and PNiPAm homo and block copolymers with linear architecture, functionalized with complementary fluorescence dyes introduced at the opposite chain ends. The thermoresponsive behavior was studied in pure aqueous solution as well as in an oil in water (o/w) microemulsion. The findings indicate that the block copolymer behaves as polymeric surfactant at low temperatures, with one relatively small hydrophobic end group and an extended hydrophilic chain forming ‘hairy micelles’ similar as the other synthesized architectures. Above the phase transition temperature of the PNiPAm block, however, the copolymer behaves as associative telechelic polymer with two non-symmetrical hydrophobic end groups, which do not mix. Thus, instead of a network of bridged ‘flower micelles’, large dynamic aggregates are formed. These are connected alternatingly by the original micellar cores as well as by clusters of the collapsed PNiPAm blocks. This type of bridged micelles is even more favored in the o/w microemulsion than in pure aqueous solution.
Die vorliegende Arbeit thematisiert die Synthese und Charakterisierung von neuen funktionalisierten ionischen Flüssigkeiten und deren Polymerisation. Die ionischen Flüssigkeiten wurden dabei sowohl mit polymerisierbaren Kationen als auch Anionen hergestellt. Zum einen wurden bei thermisch initiierten Polymerisationen Azobis(isobutyronitril) (AIBN) verwendet und zum anderen dienten bei photochemisch initiierten Polymerisationen Bis-4-(methoxybenzoyl)diethylgermanium (Ivocerin®) als Radikalstarter.
Mittels Gelpermeationschromatographie konnte das Homopolymer Polydimethylaminoethylmethacrylat untersucht werden, welches erst im Anschluss an die GPC-Messungen polymeranalog modifiziert wurde. Dabei wurden nach einer Quaternisierung und anschließender Anionenmetathese bei diesen Polymeren die Grenzviskositäten bestimmt und mit den Grenzviskositäten der direkt polymerisierten ionischen Flüssigkeiten verglichen. Bei der direkten Polymerisation von Poly(N-[2-(Methacryloyloxy)ethyl]-N-butyl-N,N-dimethyl-ammoniumbis(trifluormethylsulfonyl)imid) lag [η_Huggins] bei 100 mL/g und bei dem polymeranalog hergestellten Polymer betrug [η_Huggins] = 40 mL/g.
Die ionischen Flüssigkeiten mit polymerisierbaren funktionellen Gruppen wurden mittels Photo-DSC hinsichtlich der maximalen Polymerisationsgeschwindigkeit (Rpmax), der Zeit, in der dieses Maximum erreicht wurde, tmax, ihrer Glasüberganstemperatur (Tg) und des Umsatzes an Vinylprotonen untersucht. Bei diesen Messungen wurde zum einen der Einfluss der unterschiedlichen Alkylkettenlänge am Ammoniumion und der Einfluss von verschiedenen Anionen bei gleichbleibender Kationenstruktur analysiert. So polymerisierte das ethylsubstituierte Kation mit einer tmax von 21 Sekunden am langsamsten. Die maximale Polymerisationsgeschwindigkeit (Rpmax) betrug 3.3∙10-2 s-1. Die tmax Werte der übrigen alkylsubstituierten ionischen Flüssigkeiten mit einer polymerisierbaren funktionellen Gruppe hingegen lagen zwischen 10 und 15 Sekunden. Die Glasübergangstemperaturen der mittels photoinduzierter Polymerisation hergestellten Polymere lagen mit 44 bis 55 °C nahe beieinander. Alle Monomere zeigten einen hohen Umsatz der Vinylprotonen; er betrug zwischen 93 und 100%.
Mithilfe einer Bandanlage, ausgerüstet mit einer LED (λ = 395 nm), konnten Polymerfilme hergestellt werden. Der Umsatz an Doppelbindungsäquivalenten dieser Filme wurde anhand der 1H-NMR Spektroskopie bestimmt. Bei der dynamisch-mechanischen Analyse wurden die Polymerfilme mit einer konstanten Heizrate und Frequenz periodisch wechselnden Beanspruchungen ausgesetzt, um die Glasübergangstemperaturen zu bestimmen. Die niedrigste Tg mit 26 °C besaß das butylsubstituierte N-[2-(Methacryloyloxy)ethyl]-N-butyl-N,N-dimethyl-ammoniumbis(trifluormethylsulfonyl)imid, welches als Polymerfilm mit Ivocerin® als Initiator hergestellt wurde, wohingegen die höchste Tg bei dem gleichen Polymer, welches direkt durch freie radikalische Polymerisation der ionischen Flüssigkeit in Masse mit AIBN hergestellt wurde, 51 °C betrug. Zusätzlich wurden die Filme unter dem Aspekt der Topographie mit einem Rasterkraftmikroskop untersucht, welches eine Domänenstruktur des Polymers N-[2-(methacryloyloxy)ethyl]-N-butyl-N,N-dimethyl-ammonium tris(pentafluorethyl)trifluorphosphat offenbarte.
Childhood compared to adolescence and adulthood is characterized by high neuroplasticity represented by accelerated cognitive maturation and rapid cognitive developmental trajectories. Natural growth, biological maturation and permanent interaction with the physical and social environment fosters motor and cognitive development in children. Of note, the promotion of physical activity, physical fitness, and motor skill learning at an early age is mandatory first, as these aspects are essential for a healthy development and an efficient functioning in everyday life across the life span and second, physical activity behaviors and lifestyle habits tend to track from childhood into adulthood.
The main objective of the present thesis was to optimize and deepen the knowledge of motor and cognitive performance in young children and to develop an effective and age-appropriate exercise program feasible for the implementation in kindergarten and preschool settings. A systematic review with meta-analysis was conducted to examine the effectiveness of fundamental movement skill and exercise interventions in healthy preschool-aged children. Further, the relation between measures of physical fitness (i.e., static balance, muscle strength, power, and coordination) and attention as one domain of cognitive performance in preschool-aged children was analyzed. Subsequently, effects of a strength-dominated kindergarten-based exercise program on physical fitness components (i.e., static balance, muscle strength, power, and coordination) and cognitive performance (i.e., attention) compared to a usual kindergarten curriculum was examined.
The systematic review included trials focusing on healthy young children in kindergarten or preschool settings that applied fundamental movement skill-enhancing intervention programs of at least 4 weeks and further reported standardized motor skill outcome measures for the intervention and the control group. Children aged 4-6 years from three kindergartens participated in the cross-sectional and the longitudinal study. Product-orientated measures were conducted for the assessment of muscle strength (i.e., handgrip strength), muscle power (i.e., standing long jump), balance (i.e., timed single-leg stand), coordination (hopping on right/left leg), and attentional span (i.e., “Konzentrations-Handlungsverfahren für Vorschulkinder” [concentration-action procedure for preschoolers]).
With regards to the scientific literature, exercise and fundamental movement skill interventions are an effective method to promote overall proficiency in motor skills (i.e., object control and locomotor skills) in preschool children particularly when conducted by external experts with a duration of 4 weeks to 5 months. Moreover, significant medium associations were found between the composite score of physical fitness and attention as well as between coordination separately and attention in children aged 4-6 years. A 10-weeks strength-dominated exercise program implemented in kindergarten and preschool settings by educated and trained kindergarten teachers revealed significant improvements for the standing long jump test and the Konzentrations-Handlungsverfahren of intervention children compared to children of the control group.
The findings of the present thesis imply that fundamental movement skill and exercise interventions improve motor skills (i.e., locomotor and object control skills). Nonetheless, more high-quality research is needed. Additionally, physical fitness, particularly high performance in complex fitness components (i.e., coordination measured with the hopping on one leg test), tend to predict attention in preschool age. Furthermore, an exercise program including strength-dominated exercises, fundamental movement skills and elements of gymnastics has a beneficial effect on jumping performance with a concomitant trend toward improvements in attentional capacity in healthy preschool children. Finally, it is recommended to start early with the integration of muscular fitness (i.e., muscle strength, muscle power, muscular endurance) next to coordination, agility, balance, and fundamental movement skill exercises into regular physical activity curriculums in kindergarten settings.
Plants can be primed to survive the exposure to a severe heat stress (HS) by prior exposure to a mild HS. The information about the priming stimulus is maintained by the plant for several days. This maintenance of acquired thermotolerance, or HS memory, is genetically separable from the acquisition of thermotolerance itself and several specific regulatory factors have been identified in recent years.
On the molecular level, HS memory correlates with two types of transcriptional memory, type I and type II, that characterize a partially overlapping subset of HS-inducible genes. Type I transcriptional memory or sustained induction refers to the sustained transcriptional induction above non-stressed expression levels of a gene for a prolonged time period after the end of the stress exposure. Type II transcriptional memory refers to an altered transcriptional response of a gene after repeated exposure to a stress of similar duration and intensity. In particular, enhanced re-induction refers to a transcriptional pattern in which a gene is induced to a significantly higher degree after the second stress exposure than after the first.
This thesis describes the functional characterization of a novel positive transcriptional regulator of type I transcriptional memory, the heat shock transcription factor HSFA3, and compares it to HSFA2, a known positive regulator of type I and type II transcriptional memory. It investigates type I transcriptional memory and its dependence on HSFA2 and HSFA3 for the first time on a genome-wide level, and gives insight on the formation of heteromeric HSF complexes in response to HS. This thesis confirms the tight correlation between transcriptional memory and H3K4 hyper-methylation, reported here in a case study that aimed to reduce H3K4 hyper-methylation of the type II transcriptional memory gene APX2 by CRISPR/dCas9-mediated epigenome editing. Finally, this thesis gives insight into the requirements for a heat shock transcription factor to function as a positive regulator of transcriptional memory, both in terms of its expression profile and protein abundance after HS and the contribution of individual functional domains.
In summary, this thesis contributes to a more detailed understanding of the molecular processes underlying transcriptional memory and therefore HS memory, in Arabidopsis thaliana.
Polymeric films and coatings derived from semi-crystalline oligomers are of relevance for medical and pharmaceutical applications. In this context, the material surface is of particular importance, as it mediates the interaction with the biological system. Two dimensional (2D) systems and ultrathin films are used to model this interface. However, conventional techniques for their preparation, such as spin coating or dip coating, have disadvantages, since the morphology and chain packing of the generated films can only be controlled to a limited extent and adsorption on the substrate used affects the behavior of the films. Detaching and transferring the films prepared by such techniques requires additional sacrificial or supporting layers, and free-standing or self supporting domains are usually of very limited lateral extension. The aim of this thesis is to study and modulate crystallization, melting, degradation and chemical reactions in ultrathin films of oligo(ε-caprolactone)s (OCL)s with different end-groups under ambient conditions. Here, oligomeric ultrathin films are assembled at the air-water interface using the Langmuir technique. The water surface allows lateral movement and aggregation of the oligomers, which, unlike solid substrates, enables dynamic physical and chemical interaction of the molecules. Parameters like surface pressure (π), temperature and mean molecular area (MMA) allow controlled assembly and manipulation of oligomer molecules when using the Langmuir technique. The π-MMA isotherms, Brewster angle microscopy (BAM), and interfacial infrared spectroscopy assist in detecting morphological and physicochemical changes in the film. Ultrathin films can be easily transferred to the solid silicon surface via Langmuir Schaefer (LS) method (horizontal substrate dipping). Here, the films transferred on silicon are investigated using atomic force microscopy (AFM) and optical microscopy and are compared to the films on the water surface.
The semi-crystalline morphology (lamellar thicknesses, crystal number densities, and lateral crystal dimensions) is tuned by the chemical structure of the OCL end-groups (hydroxy or methacrylate) and by the crystallization temperature (Tc; 12 or 21 °C) or MMAs. Compression to lower MMA of ~2 Å2, results in the formation of a highly crystalline film, which consists of tightly packed single crystals. Preparation of tightly packed single crystals on a cm2 scale is not possible by conventional techniques. Upon transfer to a solid surface, these films retain their crystalline morphology whereas amorphous films undergo dewetting.
The melting temperature (Tm) of OCL single crystals at the water and the solid surface is found proportional to the inverse crystal thickness and is generally lower than the Tm of bulk PCL. The impact of OCL end-groups on melting behavior is most noticeable at the air-solid interface, where the methacrylate end-capped OCL (OCDME) melted at lower temperatures than the hydroxy end-capped OCL (OCDOL). When comparing the underlying substrate, melting/recrystallization of OCL ultrathin films is possible at lower temperatures at the air water interface than at the air-solid interface, where recrystallization is not visible. Recrystallization at the air-water interface usually occurs at a higher temperature than the initial Tc.
Controlled degradation is crucial for the predictable performance of degradable polymeric biomaterials. Degradation of ultrathin films is carried out under acidic (pH ~ 1) or enzymatic catalysis (lipase from Pseudomonas cepcia) on the water surface or on a silicon surface as transferred films. A high crystallinity strongly reduces the hydrolytic but not the enzymatic degradation rate. As an influence of end-groups, the methacrylate end-capped linear oligomer, OCDME (~85 ± 2 % end-group functionalization) hydrolytically degrades faster than the hydroxy end capped linear oligomer, OCDOL (~95 ± 3 % end-group functionalization) at different temperatures. Differences in the acceleration of hydrolytic degradation of semi-crystalline films were observed upon complete melting, partial melting of the crystals, or by heating to temperatures close to Tm. Therefore, films of densely packed single crystals are suitable as barrier layers with thermally switchable degradation rates.
Chemical modification in ultrathin films is an intricate process applicable to connect functionalized molecules, impart stability or create stimuli-sensitive cross-links. The reaction of end-groups is explored for transferred single crystals on a solid surface or amorphous monolayer at the air-water interface. Bulky methacrylate end-groups are expelled to the crystal surface during chain-folded crystallization. The density of end-groups is inversely proportional to molecular weight and hence very pronounced for oligomers. The methacrylate end-groups at the crystal surface, which are present at high concentration, can be used for further chemical functionalization. This is demonstrated by fluorescence microscopy after reaction with fluorescein dimethacrylate. The thermoswitching behavior (melting and recrystallization) of fluorescein functionalized single crystals shows the temperature-dependent distribution of the chemically linked fluorescein moieties, which are accumulated on the surfaces of crystals, and homogeneously dispersed when the crystals are molten. In amorphous monolayers at the air-water interface, reversible cross-linking of hydroxy-terminated oligo(ε-caprolactone) monolayers using dialdehyde (glyoxal) lead to the formation of 2D networks. Pronounced contraction in the area occurred for 2D OCL films in dependence of surface pressure and time indicating the reaction progress. Cross linking inhibited crystallization and retarded enzymatic degradation of the OCL film. Altering the subphase pH to ~2 led to cleavage of the covalent acetal cross-links. Besides as model systems, these reversibly cross-linked films are applicable for drug delivery systems or cell substrates modulating adhesion at biointerfaces.
The relationship between climate and forest productivity is an intensively studied subject in forest science. This Thesis is embedded within the general framework of future forest growth under climate change and its implications for the ongoing forest conversion. My objective is to investigate the future forest productivity at different spatial scales (from a single specific forest stand to aggregated information across Germany) with focus on oak-pine forests in the federal state of Brandenburg. The overarching question is: how are the oak-pine forests affected by climate change described by a variety of climate scenarios. I answer this question by using a model based analysis of tree growth processes and responses to different climate scenarios with emphasis on drought events. In addition, a method is developed which considers climate change uncertainty of forest management planning.
As a first 'screening' of climate change impacts on forest productivity, I calculated the change in net primary production on the base of a large set of climate scenarios for different tree species and the total area of Germany. Temperature increases up to 3 K lead to positive effects on the net primary production of all selected tree species. But, in water-limited regions this positive net primary production trend is dependent on the length of drought periods which results in a larger uncertainty regarding future forest productivity. One of the regions with the highest uncertainty of net primary production development is the federal state of Brandenburg.
To enhance the understanding and ability of model based analysis of tree growth sensitivity to drought stress two water uptake approaches in pure pine and mixed oak-pine stands are contrasted. The first water uptake approach consists of an empirical function for root water uptake. The second approach is more mechanistic and calculates the differences of soil water potential along a soil-plant-atmosphere continuum. I assumed the total root resistance to vary at low, medium and high total root resistance levels. For validation purposes three data sets on different tree growth relevant time scales are used. Results show that, except the mechanistic water uptake approach with high total root resistance, all transpiration outputs exceeded observed values. On the other hand high transpiration led to a better match of observed soil water content. The strongest correlation between simulated and observed annual tree ring width occurred with the mechanistic water uptake approach and high total root resistance. The findings highlight the importance of severe drought as a main reason for small diameter increment, best supported by the mechanistic water uptake approach with high root resistance. However, if all aspects of the data sets are considered no approach can be judged superior to the other. I conclude that the uncertainty of future productivity of water-limited forest ecosystems under changing environmental conditions is linked to simulated root water uptake.
Finally my study aimed at the impacts of climate change combined with management scenarios on an oak-pine forest to evaluate growth, biomass and the amount of harvested timber. The pine and the oak trees are 104 and 9 years old respectively. Three different management scenarios with different thinning intensities and different climate scenarios are used to simulate the performance of management strategies which explicitly account for the risks associated with achieving three predefined objectives (maximum carbon storage, maximum harvested timber, intermediate). I found out that in most cases there is no general management strategy which fits best to different objectives. The analysis of variance in the growth related model outputs showed an increase of climate uncertainty with increasing climate warming. Interestingly, the increase of climate-induced uncertainty is much higher from 2 to 3 K than from 0 to 2 K.