Refine
Has Fulltext
- no (141)
Year of publication
Document Type
- Article (139)
- Monograph/Edited Volume (2)
Is part of the Bibliography
- yes (141)
Keywords
- Detector modelling and simulations II (electric fields, charge transport, multiplication and induction, pulse formation, electron emission, etc) (1)
- Energy-dispersive Laue diffraction (1)
- Interaction of radiation with matter (1)
- Solid state detectors (1)
- X-ray imaging (1)
- X-ray spectroscopy (1)
- pnCCD (1)
Institute
- Institut für Physik und Astronomie (141) (remove)
Bimodal temperature behavior of structure and mobility in high molecular weight p3ht thin films
(2009)
We report a temperature dependent crystalline structure of spin-coated thin films of high molecular weight regioregular poly(3-hexylthiophene) (P3HT) (M-n similar to 30000 g/mol) and its correlation with charge carrier mobility. These investigations show a reversible change of the crystalline structure, where the interlayer lattice spacing (100)along the alkyl side chains continuously increases up to a temperature of about 220 degrees C; in contrast, the in-plane pi-pi distance reduces with increasing temperature. These changes in structure are reversible and can be repeated several times. The temperature-induced structural properties differ for thick and thin films, pointing to a surface/interface role in stabilization of the layer morphology. In contrast to the structural changes, the carrier mobility is rather constant in the temperature range from room temperature up to 100-120 degrees C, followed by a continuous decrease. For thick layers this drop is significant and the transistor performance almost vanishes at high temperature, however, it completely recovers upon cooling back to roorn temperature. The drop of the charge carrier mobility at higher temperatures is in contrast with expectations front the structural studies, considering the increase of crystalline fraction of the polycrystalline layer. our electrical measurements Underscore that the reduction of the macroscopic mobility is mostly caused by it pronounced decrease of the intergrain transport. The thermally induced crystallization along(100) direction and the creation of numerous small crystallites at the film-substrate interface reduce the number of long polymer chain, bridging crystalline domains, which ultimately limits the macroscopic charge transport.
A detailed structural analysis of a Langmuir-Blodgett (LB) multilayer composed of a polyelectrolyte-amphiphile complex (PAC) is presented. The PAC is self-assembled from metal ions, ditopic bis-terpyridines, and amphiphiles. The vertical structure of the LB multilayer is investigated by X-ray reflectometry. The multilayer has a periodicity of 57 A, which corresponds to an architecture of flat lying metallo-supramolecular coordination polyelectrolyte (MEPE) rods and upright-standing amphiphiles (dihexadecyl phosphate, DHP). In-plane diffraction reveals hexagonal packing of the DHP molecules. Using extended X-ray absorption fine structure (EXAFS) experiments, we prove that the central metal ion is coordinated to the terpyridine moieties in a pseudo-octahedral coordination environment. The Fe-N bond distances are 1.82 and 2.0 angstrom, respectively. Temperature resolved measurements indicate a reversible phase transition in a temperature range up to 55 degrees C. EXAFS measurements indicate a lengthening of the average Fe-N bond distance from 1.91 to 1.95 angstrom. The widening of the coordination cage upon heating is expected to lower the ligand field stabilization, thus giving rise to spin transitions in these composite materials
The glass transition process gets affected in ultrathin films having thickness comparable to the size of the molecules. We observe systematic broadening of the glass transition temperature (T-g) as the thickness of an ultrathin polymer film reduces below the radius of gyration but the change in the average T-g was found to be very small. The existence of reversible negative and positive thermal expansion below and above T-g increased the sensitivity of our thickness measurements performed using energy-dispersive x-ray reflectivity. A simple model of the T-g variation as a function of depth expected from sliding motion could explain the results
Strain analysis of a laterally patterned Si-wafer was carried out utilizing X-ray grazing-incidence diffraction with synchrotron radiation. The lateral patterning was done by focused ion beam implantation using an ion source of liquid AuGeSi alloy. Samples were prepared by either 35 keV Au+ ions (dose: 0.2, 2 x 10(14) cm(-2)) or 70 keV Ge++ ions (dose: 8 X 10(14) cm(-1)). It was shown that due to implantation a periodical defect structure is created consisting of both implanted and not implanted stripes. The evaluated depth distribution of defects within the implanted stripes corresponds to that obtained by TRIM calculation. The induced strain distribution, however, shows no periodicity. This can be explained by an overlap of the strain fields created in each implanted stripe. (c) 2005 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim
A phase transition in an amphiphilic mesophase is explored to deliberately induce mechanical strain in an assembly of tightly coupled metal ion coordination centers. Melting of the alkyl chains in the amphiphilic mesophase causes distortion of the coordination geometry around the central transition metal ion. As a result, the crystal field splitting of the d-orbital subsets decreases resulting in a spin transition from a low-spin to a high-spin state. The diamagnetic-paramagnetic transition is reversible. This concept is demonstrated in a metallo-supramolecular coordination polyelectrolyte-amphiphile complex self-assembled from ditopic bis-terpyridines, Fe(II) as central transition metal, and dialkyl phosphates as amphiphiles. The magnetic properties are studied in a Langmuir-Blodgett multilayer. The modularity of this concept provides extensive control of structure and function from molecular to macroscopic length scales and gives access to a wide range of new molecular magnetic architectures such as nanostructures, thin films, and liquid crystals
X-ray diffraction by a crystal in a permanent external electric field : general considerations
(2005)
The variations of X-ray diffraction intensities from a crystal in the presence of a permanent external electric field is modeled analytically using a first-order stationary perturbation theory. The change in a crystal, induced by an external electric field, is separated into two contributions. The first one is related to a pure polarization of an electron subsystem, while the second contribution can be reduced to the displacements of the rigid pseudoatoms from their equilibrium positions. It is shown that a change of the X-ray diffraction intensities mainly originates from the second contribution, while the influence of the pure polarization of a crystal electron subsystem is negligibly small. The quantities restored from an X-ray diffraction experiment in the presence of an external electric field were analyzed in detail in terms of a rigid pseudoatomic model of electron density and harmonic approximation for the atomic thermal motion. Explicit relationships are derived that link the properties of phonon spectra with E-field-induced variations of a structure factor, pseudoatomic displacements and piezoelectric strains. The displacements can be numerically estimated using a model of independent atomic motion if the Debye - Waller factors and pseudoatomic charges are known either from a previous single-crystal X-ray diffraction study or from density functional theory calculations. The above estimations can be used to develop an optimum strategy for a data collection that avoids the measurements of reflections insensitive to the electric-field-induced variations
Experiments at the bending magnet beamline at BESSY II (EDR beamline) profit from the excellent coherence properties of third generation synchrotron sources. Considering the exponentially decaying incident spectrum, and because no optical elements are installed except slits and vacuum windows, coherence experiments can be performed between 5 keV < E < 15 keV. First, the energy dependence of spatial coherence properties were determined measuring diffraction at single and double pinholes. Next, the coherent white radiation was used to probe the morphology of thin films in reflection geometry. The recorded intensity maps (reflectivity versus sample position) provide speckle patterns which reveal the locally varying sample morphology. Setting the incident angle, alpha(i), smaller or larger than the critical angle of total external reflection, alpha(c), one should be able to separate the surface height profile from the subsurface density modulation of a sample. The validity of this approach is verified at the example of reciprocal space maps taken from a polymer surface where we could reconstruct the lateral height profile from speckle data. (C) 2004 Elsevier B.V. All rights reserved
Experiments using a simple X-ray interferometer to measure the degree of spatial coherence of hard X-rays are reported. A monolithic Fresnel bimirror is used at small incidence angles to investigate synchrotron radiation in the energy interval 5-50 keV with monochromatic and white beam. The experimental setup was equivalent to a Young's double-slit experiment for hard X-rays with slit dimensions in the micrometre range. From the high-contrast interference pattern the degree of coherence was determined.