Refine
Year of publication
Document Type
Keywords
- calcium phosphate (9)
- Ionic liquids (7)
- ionic liquids (7)
- biomineralization (5)
- ionic liquid (5)
- poly(lactic acid) (5)
- 3D printing (4)
- activated carbon (4)
- brushite (4)
- dye removal (4)
- electrochemistry (4)
- hydroxyapatite (4)
- ionic conductivity (4)
- methyl orange (4)
- methylene blue (4)
- silver nanoparticles (4)
- water treatment (4)
- biomaterials (3)
- cellulose (3)
- erosion (3)
- hydrogel (3)
- ionogels (3)
- nanocomposite (3)
- nanoparticles (3)
- oxidative stress (3)
- roughness (3)
- sodium hydroxide etching (3)
- surface modification (3)
- water (3)
- wettability (3)
- 11-mercaptoundecanoic acid (2)
- 3-mercaptopropionic acid (2)
- 4-nitrophenol (2)
- Adsorbent (2)
- AgI (2)
- Alkylpyridinium salts (2)
- Arabica coffee (2)
- Bombyx mori silk (2)
- Calcium phosphate (2)
- Carica papaya seeds (2)
- Catalysis (2)
- Cd-free (2)
- Complex (2)
- E. coli (2)
- EDTA (2)
- Electrospinning (2)
- Gas (2)
- Hybrid materials (2)
- InP (2)
- InPZnS (2)
- Ionic Liquid Precursor (2)
- Ionogels (2)
- Kaolinite (2)
- Kinetics (2)
- LC-MS/MS (2)
- Laser-SNMS (2)
- Mineralization (2)
- NTA (2)
- Nanostructures (2)
- PLA (2)
- Phase transitions (2)
- QDs (2)
- Salts (2)
- Solvents (2)
- Structure elucidation (2)
- Thermochromism (2)
- ToF-SIMS (2)
- Water treatment (2)
- X-ray diffraction (2)
- aqueous dispersion (2)
- biomaterial (2)
- biomimetic mineralization (2)
- bound phenolic compounds (2)
- cadmium-free (2)
- calcination (2)
- calcium carbonate (2)
- calcium phosphate hybrid material (2)
- carbon dots (2)
- chitosan (2)
- clay (2)
- coffee by-products (2)
- coffee processing (2)
- cryogel (2)
- dip-coating (2)
- dye adsorption (2)
- dye mixture (2)
- gelatin (2)
- gold (2)
- hybrid materials (2)
- hybrid nanomaterials (2)
- hydroyxapatite (2)
- imidazolium (2)
- ionic liquid crystals (2)
- ionic liquid precursors (2)
- ionogel (2)
- ligand exchange (2)
- luminescence (2)
- mechanical properties (2)
- mechanical strength (2)
- mercaptocarboxylic acids (2)
- micro/mesoporous (2)
- microstructure (2)
- multishell (2)
- organic compounds adsorption (2)
- organic–inorganic hybrid (2)
- parchment (2)
- peptide biomarkers (2)
- phase separation (2)
- phase transfer (2)
- photocatalytic water splitting (2)
- polyamine (2)
- polyammonium salt (2)
- polybutadiene (2)
- polycarboxylate (2)
- polyzwitterion (2)
- precipitation (2)
- protein carbonyls (2)
- protein modification (2)
- quantum dots (2)
- spent coffee (2)
- spent coffee grounds (2)
- surface chemistry (2)
- thermal properties (2)
- titania (2)
- valorization (2)
- water remediation (2)
- 3D (1)
- Ag/peptide@SiO(2) nanostructures (1)
- Amphiphilic polymers (1)
- Bacteria (1)
- Bio-inspired mineralization (1)
- Bioinspired (1)
- Biomimetics (1)
- Breakthrough time (1)
- Cation exchange Capacity (1)
- Cellulose (1)
- Clay-polymer nanocomposite - CPN (1)
- Click chemistry (1)
- Composite adsorbents (1)
- Composites (1)
- CuO (1)
- Defects (1)
- Desorption (1)
- Desorption kinetics (1)
- Dictyostelium discoideum (1)
- Energy (1)
- Fiber (1)
- Filtration (1)
- Gold nanoparticles (1)
- Grotthuss mechanism (1)
- Health (1)
- Heterogeneous catalysis (1)
- Hybrid clay (1)
- Hybrid material (1)
- Hydrogels (1)
- Hydrogen Production (1)
- Ionic Liquid (1)
- Ionic liquid (1)
- Ionogel (1)
- Iron (1)
- LED (1)
- Langmuir monolayers (1)
- Magnetic properties (1)
- Mesoporous materials (1)
- Microorganism (1)
- Micropollutants (1)
- N-acetyl cysteine (1)
- N-butylpyridinium bromide (1)
- Nanotechnology (1)
- Nanotoxicity (1)
- NiTi (1)
- Nuclear magnetic resonance spectroscopy (1)
- Nucleophilic addition (1)
- Peptide coating (1)
- Phosphate recovery (1)
- Poly(ionic liquid) (1)
- Polyethylene imine (1)
- Polymers (1)
- Polymers on surfaces (1)
- Precipitation (1)
- Raman spectroscopy (1)
- Regeneration (1)
- SN(A)15 (1)
- Scattering (1)
- Sensors (1)
- Silver nanoparticles (1)
- Solid polymer electrolyte (1)
- Surface chemistry (1)
- Sustainable (1)
- TOF-SIMS (1)
- Triiodide "network" (1)
- Water (1)
- X-ray scattering (1)
- acidic ionic liquids (1)
- air-water-interface (1)
- aqueous-solution (1)
- bandgap (1)
- biocompatibility (1)
- block-copolymers (1)
- bone mimic (1)
- calcium (1)
- carbohydrates (1)
- carbonated apatite (1)
- catalysis (1)
- cation miscibility (1)
- cells (1)
- cesium cation (1)
- chiral nanoparticles (1)
- clusters (1)
- colloidal chemistry (1)
- colloidal quantum dots (1)
- confocal Raman microscopy (1)
- copper(II) halide salts (1)
- core-shell structures (1)
- cyano anchor group (1)
- dielectric polarisation (1)
- dielectric spectroscopy (1)
- disinfection (1)
- elastin-like recombinamers (1)
- electrolytes (1)
- electron-spin resonance (1)
- emulsion polymerization (1)
- energy materials (1)
- environmental remediation (1)
- extraction (1)
- ferroelectric thin films (1)
- food contact material (1)
- gas sensing (1)
- high pressure (1)
- hydrogen (1)
- imaging (1)
- incomplete surface passivation (1)
- indium (1)
- inner surface (1)
- ion transport (1)
- life sciences (1)
- lipidomics (1)
- liquid crystal (1)
- liquid-crystal precursors (1)
- liquids (1)
- magnetic nanoparticles (1)
- magnetic-properties (1)
- mesogen mesophases (1)
- mesoporous materials (1)
- metal (1)
- metal-containing ionic (1)
- metal-containing ionic liquids; (1)
- mineralization (1)
- mineralization beneath (1)
- molecular-structure (1)
- morphology (1)
- multidrug-resistant Escherichia coli (1)
- nano clay (1)
- nanocomposite material (1)
- nanofillers (1)
- nanomedicine (1)
- nanosilver (1)
- nanostructures (1)
- neurons (1)
- nucleation (1)
- organosilica (1)
- orthophosphates (1)
- paramagnetic-resonance (1)
- peptide-templated materials (1)
- perovskite solar cells (1)
- phagocytosis (1)
- phase transitions (1)
- phosphide (1)
- photocatalysts (1)
- photochemistry (1)
- poly(ethylene glycol) (1)
- polycationic monolayer (1)
- polyelectrolytes (1)
- polymer (1)
- polymer brushes (1)
- polymer coating (1)
- polymer fillers (1)
- polymer films (1)
- polymer modification (1)
- pore templating (1)
- printing (1)
- proton conductivity (1)
- proton hopping (1)
- pyroelectricity (1)
- reactive oxygen species (1)
- ring-opening polymerization (1)
- rubidium cation (1)
- self-assembly (1)
- smart materials (1)
- sol-gel processes (1)
- solar (1)
- spin coating (1)
- square planar (1)
- sulfides (1)
- system (1)
- temperature phase (1)
- tetrabutylammonium hydroxide (1)
- tetrachlorocuprate(II) salts (1)
- tetrahalido metallates (1)
- tetrahalidometallates (1)
- thermomorphism (1)
- thiol passivation (1)
- three-dimensional depth profiling (1)
Hexagonal p-type semiconductor CuS nanoplates were synthesized via a hot injection method from bis(trimethylsilyl) sulfide and the ionic liquid precursor bis(N-dodecylpyridinium) tetrachloridocuprate( II). The particles have a broad size distribution with diameters between 30 and 680 nm and well-developed crystal habits. The nanoplates were successfully incorporated into organic photovoltaic (OPV) cells as hole conduction materials. The power conversion efficiency of OPV cells fabricated with the nanoplates is 16% higher than that of a control device fabricated without the nanoplates. (C) 2018 Author(s).
Carbon Adsorbents from Spent Coffee for Removal of
Methylene Blue and Methyl Orange from Water
(2021)
Activated carbons (ACs) were prepared from dried spent coffee (SCD), a biological waste product, to produce adsorbents for methylene blue (MB) and methyl orange (MO) from aqueous solution. Pre-pyrolysis activation of SCD was achieved via treatment of the SCD with aqueous sodium hydroxide solutions at 90 °C. Pyrolysis of the pretreated SCD at 500 °C for 1 h produced powders with typical characteristics of AC suitable and effective for dye adsorption. As an alternative to the rather harsh base treatment, calcium carbonate powder, a very common and abundant resource, was also studied as an activator. Mixtures of SCD and CaCO3 (1:1 w/w) yielded effective ACs for MO and MB removal upon pyrolysis needing only small amounts of AC to clear the solutions. A selectivity of the adsorption process toward anionic (MO) or cationic (MB) dyes was not observed.
Eight d-metal-containing N-butylpyridinium ionic liquids (ILs) with the nominal composition (C4Py)2[Ni0.5M0.5Cl4] or (C4Py)2[Zn0.5M0.5Cl4] (M = Cu, Co, Mn, Ni, Zn; C4Py = N-butylpyridinium) were synthesized, characterized, and investigated for their optical properties. Single crystal and powder X-ray analysis shows that the compounds are isostructural to existing examples based on other d-metal ions. Inductively coupled plasma optical emission spectroscopy measurements confirm that the metal/metal ratio is around 50 : 50. UV-Vis spectroscopy shows that the optical absorption can be tuned by selection of the constituent metals. Moreover, the compounds can act as an optical sensor for the detection of gases such as ammonia as demonstrated via a simple prototype setup.
The synthesis, structure, and photocatalytic water splitting performance of two new titania (TiO2)/gold(Au)/Bombyx mori silk hybrid materials are reported. All materials are monoliths with diameters of up to ca. 4.5 cm. The materials are macroscopically homogeneous and porous with surface areas between 170 and 210 m(2)/g. The diameter of the TiO2 nanoparticles (NPs) - mainly anatase with a minor fraction of brookite - and the Au NPs are on the order of 5 and 7-18 nm, respectively. Addition of poly(ethylene oxide) to the reaction mixture enables pore size tuning, thus providing access to different materials with different photocatalytic activities. Water splitting experiments using a sunlight simulator and a Xe lamp show that the new hybrid materials are effective water splitting catalysts and produce up to 30 mmol of hydrogen per 24 h. Overall the article demonstrates that the combination of a renewable and robust scaffold such as B. mori silk with a photoactive material provides a promising approach to new monolithic photocatalysts that can easily be recycled and show great potential for application in lightweight devices for green fuel production.
The protein fraction, important for coffee cup quality, is modified during post-harvest treatment prior to roasting. Proteins may interact with phenolic compounds, which constitute the major metabolites of coffee, where the processing affects these interactions. This allows the hypothesis that the proteins are denatured and modified via enzymatic and/or redox activation steps. The present study was initiated to encompass changes in the protein fraction. The investigations were limited to major storage protein of green coffee beans. Fourteen Coffea arabica samples from various processing methods and countries were used. Different extraction protocols were compared to maintain the status quo of the protein modification. The extracts contained about 4–8 µg of chlorogenic acid derivatives per mg of extracted protein. High-resolution chromatography with multiple reaction monitoring was used to detect lysine modifications in the coffee protein. Marker peptides were allocated for the storage protein of the coffee beans. Among these, the modified peptides K.FFLANGPQQGGK.E and R.LGGK.T of the α-chain and R.ITTVNSQK.I and K.VFDDEVK.Q of β-chain were detected. Results showed a significant increase (p < 0.05) of modified peptides from wet processed green beans as compared to the dry ones. The present study contributes to a better understanding of the influence of the different processing methods on protein quality and its role in the scope of coffee cup quality and aroma. View Full-Text
Thirteen N-butylpyridinium salts, including three monometallic [C4Py](2)[MCl4], nine bimetallic [C4Py](2)[(M1-xMxCl4)-M-a-Cl-b] and one trimetallic compound [C4Py](2)[(M1-y-zMyMz (c) Cl4)-M-a-M-b] (M=Co, Cu, Mn; x=0.25, 0.50 or 0.75 and y=z=0.33), were synthesized and their structure and thermal and electrochemical properties were studied. All compounds are ionic liquids (ILs) with melting points between 69 and 93 degrees C. X-ray diffraction proves that all ILs are isostructural. The conductivity at room temperature is between 10(-4) and 10(-8) S cm(-1). Some Cu-based ILs reach conductivities of 10(-2) S cm(-1), which is, however, probably due to IL dec. This correlates with the optical bandgap measurements indicating the formation of large bandgap semiconductors. At elevated temperatures approaching the melting points, the conductivities reach up to 1.47x10(-1) S cm(-1) at 70 degrees C. The electrochemical stability windows of the ILs are between 2.5 and 3.0 V.
The article describes the surface modification of 3D printed poly(lactic acid) (PLA) scaffolds with calcium phosphate (CP)/gelatin and CP/chitosan hybrid coating layers. The presence of gelatin or chitosan significantly enhances CP co-deposition and adhesion of the mineral layer on the PLA scaffolds. The hydrogel/CP coating layers are fairly thick and the mineral is a mixture of brushite, octacalcium phosphate, and hydroxyapatite. Mineral formation is uniform throughout the printed architectures and all steps (printing, hydrogel deposition, and mineralization) are in principle amenable to automatization. Overall, the process reported here therefore has a high application potential for the controlled synthesis of biomimetic coatings on polymeric biomaterials.
The article describes the synthesis and properties of new ionogels for ion transport. A new preparation process using an organic linker, bis(3-(trimethoxysilyl) propyl) amine (BTMSPA), yields stable organosilica matrix materials. The second ionogel component, the ionic liquid 1-methyl-3-(4-sulfobutyl) imidazolium 4-methylbenzenesulfonate, [BmimSO(3)H][PTS], can easily be prepared with near-quantitative yields. [BmimSO(3)H][PTS] is the proton conducting species in the ionogel. By combining the stable organosilica matrix with the sulfonated ionic liquid, mechanically stable, and highly conductive ionogels with application potential in sensors or fuel cells can be prepared.
The use of acidic ionic liquids and solids as electrolytes in fuel cells is an emerging field due to their efficient proton conductivity and good thermal stability. Despite multiple reports describing conducting properties of acidic ILs, little is known on the charge-transport mechanism in the vicinity of liquid-glass transition and the structural factors governing the proton hopping. To address these issues, we studied two acidic imidazolium-based ILs with the same cation, however, different anions-bulk tosylate vs small methanesulfonate. High-pressure dielectric studies of anhydrous and water-saturated materials performed in the close vicinity of T-g have revealed significant differences in the charge-transport mechanism in these two systems being undetectable at ambient conditions. Thereby, we demonstrated the effect of molecular architecture on proton hopping, being crucial in the potential electrochemical applications of acidic ILs.
Eight d-metal-containing N-butylpyridinium ionic liquids (ILs) with the nominal composition (C4Py)2[Ni0.5M0.5Cl4] or (C4Py)2[Zn0.5M0.5Cl4] (M = Cu, Co, Mn, Ni, Zn; C4Py = N-butylpyridinium) were synthesized, characterized, and investigated for their optical properties. Single crystal and powder X-ray analysis shows that the compounds are isostructural to existing examples based on other d-metal ions. Inductively coupled plasma optical emission spectroscopy measurements confirm that the metal/metal ratio is around 50 : 50. UV-Vis spectroscopy shows that the optical absorption can be tuned by selection of the constituent metals. Moreover, the compounds can act as an optical sensor for the detection of gases such as ammonia as demonstrated via a simple prototype setup.
Ionic liquid crystals (ILCs), that is, ionic liquids exhibiting mesomorphism, liquid crystalline phases, and anisotropic properties, have received intense attention in the past years. Among others, this is due to their special properties arising from the combination of properties stemming from ionic liquids and from liquid crystalline arrangements. Besides interesting fundamental aspects, ILCs have been claimed to have tremendous application potential that again arises from the combination of properties and architectures that are not accessible otherwise, or at least not accessible easily by other strategies. The current review highlights recent developments in ILC research, starting with some key fundamental aspects. Further subjects covered include the synthesis and variations of modern ILCs, including the specific tuning of their mesomorphic behavior. The review concludes with reflections on some applications that may be within reach for ILCs and finally highlights a few key challenges that must be overcome prior and during true commercialization of ILCs.
Fifteen N-butylpyridinium salts - five monometallic [C4Py](2)[MBr4] and ten bimetallic [C4Py](2)[(M0.5M0.5Br4)-M-a-Br-b] (M=Co, Cu, Mn, Ni, Zn) - were synthesized, and their structures and thermal and electrochemical properties were studied. All the compounds are ionic liquids (ILs) with melting points between 64 and 101 degrees C. Powder and single-crystal X-ray diffraction show that all ILs are isostructural. The electrochemical stability windows of the ILs are between 2 and 3 V. The conductivities at room temperature are between 10(-5) and 10(-6) S cm(-1). At elevated temperatures, the conductivities reach up to 10(-4) S cm(-1) at 70 degrees C. The structures and properties of the current bromide-based ILs were also compared with those of previous examples using chloride ligands, which illustrated differences and similarities between the two groups of ILs.
Metal sulfide nanoparticle synthesis with ionic liquids state of the art and future perspectives
(2021)
Metal sulfides are among the most promising materials for a wide variety of technologically relevant applications ranging from energy to environment and beyond. Incidentally, ionic liquids (ILs) have been among the top research subjects for the same applications and also for inorganic materials synthesis. As a result, the exploitation of the peculiar properties of ILs for metal sulfide synthesis could provide attractive new avenues for the generation of new, highly specific metal sulfides for numerous applications. This article therefore describes current developments in metal sulfide nano-particle synthesis as exemplified by a number of highlight examples. Moreover, the article demonstrates how ILs have been used in metal sulfide synthesis and discusses the benefits of using ILs over more traditional approaches. Finally, the article demonstrates some technological challenges and how ILs could be used to further advance the production and specific property engineering of metal sulfide nanomaterials, again based on a number of selected examples.
The present article is among the first reports on the effects of poly(ampholyte)s and poly(betaine)s on the biomimetic formation of calcium phosphate. We have synthesized a series of di- and triblock copolymers based on a non-ionic poly(ethylene oxide) block and several charged methacrylate monomers, 2-(trimethylammonium)ethyl methacrylate chloride, 2-((3-cyanopropyl)-dimethylammonium)ethyl methacrylate chloride, 3-sulfopropyl methacrylate potassium salt, and [2-(methacryloyloxy)ethyl]dimethyl-(3-sulfopropyl)ammonium hydroxide. The resulting copolymers are either positively charged, ampholytic, or betaine block copolymers. All the polymers have very high molecular weights of over 106 g mol−1. All polymers are water-soluble and show a strong effect on the precipitation and dissolution of calcium phosphate. The strongest effects are observed with triblock copolymers based on a large poly(ethylene oxide) middle block (nominal Mn = 100 000 g mol−1). Surprisingly, the data show that there is a need for positive charges in the polymers to exert tight control over mineralization and dissolution, but that the exact position of the charge in the polymer is of minor importance for both calcium phosphate precipitation and dissolution.
Polymer brushes on thiol-modified gold surfaces were synthesized by using terminal thiol groups for the surface initiated free radical polymerization of methacrylic acid and dimethylaminotheyl methacrylate, respectively. Atomic force microscopy shows that the resulting poly(methacrylic acid (PMAA) and poly(dimethylaminothyl methacrylate) (PDM- AEMA) brushes are homogeneous. Contact angle measurements show that the brushes are pH responsive and can reversibly be protonated and deprotonated. Mineralization of the brushes with calcium phosphate at different pH yields homogeneously mineralized surfaces, and preosteoblastic cells proliferate-on be number of living cells on the mineralized hybrid surface is ca. 3 times (P corresponding nonmineralized brushes.
Ionogels (IGs) based on poly(methyl methacrylate) (PMMA) and the metal-containing ionic liquids (ILs) bis-1-butyl-3-methlimidazolium tetrachloridocuprate(II), tetrachloride cobaltate(II), and tetrachlorido manganate(II) have been synthesized and their mechanical and electrical properties have been correlated with their microstructure. Unlike many previous examples, the current IGs show a decreasing stability in stress-strain experiments on increasing IL fractions. The conductivities of the current IGs are lower than those observed in similar examples in the literature. Both effects are caused by a two-phase structure with micrometer-sized IL-rich domains homogeneously dispersed an IL-deficient continuous PMMA phase. This study demonstrates that the IL-polymer miscibility and the morphology of the IGs are key parameters to control the (macroscopic) properties of IGs.
The phase behavior of an amphiphilic block copolymer based on a poly(aspartic acid) hydrophilic block and a poly(n-butyl acrylate) hydrophobic block was investigated at the air–water and air–buffer interface. The polymer forms stable monomolecular films on both subphases. At low pH, the isotherms exhibit a plateau. Compression–expansion experiments and infrared reflection absorption spectroscopy suggest that the plateau is likely due to the formation of polymer bi- or multilayers. At high pH the films remain intact upon compression and no multilayer formation is observed. Furthermore, the mineralization of calcium phosphate beneath the monolayer was studied at different pH. The pH of the subphase and thus the polymer charge strongly affects the phase behavior of the film and the mineral formation. After 4 h of mineralization at low pH, atomic force microscopy shows smooth mineral films with a low roughness. With increasing pH the mineral films become inhomogeneous and the roughness increases. Transmission electron microscopy confirms this: at low pH a few small but uniform particles form whereas particles grown at higher pH are larger and highly agglomerated. Energy-dispersive X-ray spectroscopy and X-ray photoelectron spectroscopy confirm the formation of calcium phosphate. The levels of mineralization are higher in samples grown at high pH.
The large-scale green synthesis of graphene-type two-dimensional materials is still challenging. Herein, we describe the ionothermal synthesis of carbon-based composites from fructose in the iron-containing ionic liquid 1-butyl-3-methylimidazolium tetrachloridoferrate(III), [Bmim][FeCl4] serving as solvent, catalyst, and template for product formation. The resulting composites consist of oligo-layer graphite nanoflakes and iron carbide particles. The mesoporosity, strong magnetic moment, and high specific surface area of the composites make them attractive for water purification with facile magnetic separation. Moreover, Fe3Cfree graphite can be obtained via acid etching, providing access to fairly large amounts of graphite material. The current approach is versatile and scalable, and thus opens the door to ionothermal synthesis towards the larger-scale synthesis of materials that are, although not made via a sustainable process, useful for water treatment such as the removal of organic molecules.
Calcium phosphate nanofibers with a diameter of only a few nanometers and a cotton-ball-like aggregate morphology have been reported several times in the literature. Although fiber formation seems reproducible in a variety of conditions, the crystal structure and chemical composition of the fibers have been elusive. Using scanning transmission electron microscopy, low dose electron (nano)diffraction, energy-dispersive X-ray spectroscopy, and energy-filtered transmission electron microscopy, we have assigned crystal structures and chemical compositions to the fibers. Moreover, we demonstrate that the mineralization process yields true polymer/calcium phosphate hybrid materials where the block copolymer template is closely associated with the calcium phosphate.