Refine
Has Fulltext
- no (8) (remove)
Document Type
- Article (8)
Language
- English (8)
Is part of the Bibliography
- yes (8)
Keywords
- KiK-net (2)
- Site effects (2)
- Amplification (1)
- Earthquake (1)
- Earthquake ground motions (1)
- Earthquake hazards (1)
- HVSR (1)
- Site proxy (1)
- Surface-to-borehole spectral ratios (1)
- Wave propagation (1)
Institute
The one-dimensional (1-D) approach is still the dominant method to incorporate site effects in engineering applications. To bridge the 1-D to multidimensional site response analysis, we develop quantitative criteria and a reproducible method to identify KiK-net sites with significant deviations from 1-D behavior. We found that 158 out of 354 show two-dimensional (2-D) and three-dimensional (3-D) effects, extending the resonance toward shorter periods at which 2-D or 3-D site effects exceed those of the classic 1-D configurations and imposing an additional amplification to that caused by the impedance contrast alone. Such 2-D and 3-D effects go along with a large within-station ground motion variability. Remarkably, these effects are found to be more pronounced for small impedance contrasts. While it is hardly possible to identify common features in ground motion behavior for stations with similar topography typologies, it is not over-conservative to apply a safety factor to account for 2-D and 3-D site effects in ground motion modeling.
A proper assessment of seismic reference site conditions has important applications as they represent the basis on which ground motions and amplifications are generally computed. Besides accounting for the average S-wave velocity over the uppermost 30 m (V-S30), the parameterization of high-frequency ground motions beyond source-corner frequency received significant attention. kappa, an empirical parameter introduced by Anderson and Hough (1984), is often used to represent the spectral decay of the acceleration spectrum at high frequencies. The lack of hard-rock records and the poor understanding of the physics of kappa introduced significant epistemic uncertainty in the final seismic hazard of recent projects. Thus, determining precise and accurate regional hard-rock kappa(0) values is critical. We propose an alternative procedure for capturing the reference kappa(0) on regional scales by linking thewell-known high-frequency attenuation parameter kappa and the properties of multiple-scattered coda waves. Using geological and geophysical data around more than 1300 stations for separating reference and soft soil sites and based on more than 10,000 crustal earthquake recordings, we observe that kappa(0) from multiple-scattered coda waves seems to be independent of the soil type but correlated with the hard-rock kappa(0), showing significant regional variations across Europe. The values range between 0.004 s for northern Europe and 0.020 s for the southern and southeastern parts. On the other hand, measuring kappa (and correspondingly kappa(0)) on the S-wave window (as classically proposed), the results are strongly affected by transmitted (reflected, refracted, and scattered) waves included in the analyzed window biasing the proper assessment of kappa(0). This effect is more pronounced for soft soil sites. In this way, kappa(coda)(0) can serve as a proxy for the regional hard-rock kappa(0) at the reference sites.
Evaluation of a novel application of earthquake HVSR in site-specific amplification estimation
(2020)
Ground response analyses (GRA) model the vertical propagations of SH waves through flat-layered media (1DSH) and are widely carried out to evaluate local site effects in practice. Horizontal-to-vertical spectral ratio (HVSR) technique is a cost-effective approach to extract certain site-specific information, e.g., site fundamental frequency (f(0)), but HVSR values cannot be directly used to approximate the levels of S-wave amplifications. Motivated by the work of Kawase et al. (2019), we propose a procedure to correct earthquake HVSR amplitudes for direct amplification estimations. The empirical correction compensates HVSR by generic vertical amplification spectra categorized by the vertical fundamental frequency (f(0v)) via kappa-means clustering. In this investigation, we evaluate the effectiveness of the corrected HVSR in approximating observed linear amplifications in comparison with 1DSH modellings. We select a total of 90 KiK-net (Kiban Kyoshin network) surface-downhole sites which are found to have no velocity contrasts below their boreholes and thus of which surface-to-borehole spectral ratios (SBSRs) can be taken as their empirical transfer functions (ETFs). 1DSH-based theoretical transfer functions (TTFs) are computed in the linear domain considering uncertainties in Vs profiles through randomizations. Five goodness-of-fit metrics are adopted to gauge the closeness between observed (ETF) and predicted (i.e., TTF and corrected HVSR) amplifications in both amplitude and spectral shape over frequencies from f(0) to 25 Hz. We find that the empirical correction to HVSR is highly effective and achieves a "good match" in both spectral shape and amplitude at the majority of the 90 KiK-net sites, as opposed to less than one-third for the 1DSH modelling. In addition, the empirical correction does not require a velocity model, which GRAs require, and thus has great potentials in seismic hazard assessments.
In this investigation, we examine the uncertainties using the horizontal-to-vertical spectral ratio (HVSR) technique on earthquake recordings to detect site resonant frequencies at 207 KiK-net sites. Our results show that the scenario dependence of response (pseudospectral acceleration) spectral ratio could bias the estimates of resonant frequencies for sites having multiple significant peaks with comparable amplitudes. Thus, the Fourier amplitude spectrum (FAS) should be preferred in computing HVSR. For more than 80% of the investigated sites, the first peak (in the frequency domain) on the average HVSR curve over multiple sites coincides with the highest peak. However, for sites with multiple peaks, the highest peak frequency (f(p)) is less susceptible to the selection criteria of significant peaks and the extent of smoothing to spectrum than the first peak frequency (f(0)). Meanwhile, in comparison to the surface-to-borehole spectral ratio, f(0) tends to underestimate the predominant frequency (at which the largest amplification occurs) more than f(p). In addition, in terms of characterizing linear site response, f(p) shows a better overall performance than f(0). Based on these findings, we thus recommend that seismic network operators provide f(p) on the average HVSRFAS curve as a priority, ideally together with the average HVSRFAS curve in site characterization.
In the Next Generation Attenuation West2 (NGA-West2) project, a 3D subsurface structure model (Japan Seismic Hazard Information Station [J-SHIS]) was queried to establish depths to 1.0 and 2.5 km/s velocity isosurfaces for sites without depth measurement in Japan. In this article, we evaluate the depth parameters in the J-SHIS velocity model by comparing them with their corresponding site-specific depth measurements derived from selected KiK-net velocity profiles. The comparison indicates that the J-SHIS model underestimates site depths at shallow sites and overestimates depths at deep sites. Similar issues were also identified in the southern California basin model. Our results also show that these underestimations and over-estimations have a potentially significant impact on ground-motion prediction using NGA-West2 ground-motion models (GMMs). Site resonant period may be considered as an alternative to depth parameter in the site term of a GMM.
This study aims to identify the best-performing site characterization proxy alternative and complementary to the conventional 30 m average shear-wave velocity V-S30, as well as the optimal combination of proxies in characterizing linear site response. Investigated proxies include T-0 (site fundamental period obtained from earthquake horizontal-to-vertical spectral ratios), V-Sz (measured average shear-wave velocities to depth z, z = 5, 10, 20 and 30 m), Z(0.8) and Z(1.0) (measured site depths to layers having shear-wave velocity 0.8 and 1.0 km/s, respectively), as well as Z(x-infer) (inferred site depths from a regional velocity model, x = 0.8 and 1.0, 1.5 and 2.5 km/s). To evaluate the performance of a site proxy or a combination, a total of 1840 surface-borehole recordings is selected from KiK-net database. Site amplifications are derived using surface-to-borehole response-, Fourier- and cross-spectral ratio techniques and then are compared across approaches. Next, the efficacies of 7 single-proxies and 11 proxy-pairs are quantified based on the site-to-site standard deviation of amplification residuals of observation about prediction using the proxy or the pair. Our results show that T-0 is the best-performing single-proxy among T-0, Z(0.8), Z(1.0) and V-Sz. Meanwhile, T-0 is also the best-performing proxy among T-0, Z(0.8), Z(1.0) and Z(x-infer) complementary to V-S30 in accounting for the residual amplification after V-S30-correction. Besides, T-0 alone can capture most of the site effects and should be utilized as the primary site indicator. Though (T-0, V-S30) is the best-performing proxy pair among (V-S30, T-0), (V-S30, Z(0.8)), (V-S30, Z(1.0)), (V-S30, Z(x-infer)) and (T-0, V-Sz), it is only slightly better than (T-0, V-S20). Considering both efficacy and engineering utility, the combination of T-0 (primary) and V-S20 (secondary) is recommended. Further study is needed to test the performances of various proxies on sites in deep sedimentary basins.
1-D site response analysis dominates earthquake engineering practice, while local 2-D/3-D models are often required at sites where the site response is complex. For such sites, the 1-D representation of the soil column can account neither for topographic effects or dipping layers nor for locally generated horizontally propagating surface waves. It then remains a crucial task to identify whether the site response can be modelled sufficiently precisely by 1-D analysis. In this study we develop a method to classify sites according to their 1-D or 2-D/3-D nature. This classification scheme is based on the analysis of surface earthquake recordings and the evaluation of the variability and similarity of the horizontal Fourier spectra. The taxonomy is focused on capturing significant directional dependencies and interevent variabilities indicating a more probable 2-D/3-D structure around the site causing the ground motion to be more variable. While no significant correlation of the 1-D/3-D site index with environmental parameters and site proxies seems to exist, a reduction in the within-site (single-station) variability is found. The reduction is largest (up to 20 per cent) for purely 1-D sites. Although the taxonomy system is developed using surface stations of the KiK-net network in Japan as considerable additional information is available, it can also be applied to any (non-downhole array) site.
The simulation of broad-band (0.1 to 10 + Hz) ground-shaking over deep and spatially extended sedimentary basins at regional scales is challenging. We evaluate the ground-shaking of a potential M 6.5 earthquake in the southern Lower Rhine Embayment, one of the most important areas of earthquake recurrence north of the Alps, close to the city of Cologne in Germany. In a first step, information from geological investigations, seismic experiments and boreholes is combined for deriving a harmonized 3D velocity and attenuation model of the sedimentary layers. Three alternative approaches are then applied and compared to evaluate the impact of the sedimentary cover on ground-motion amplification. The first approach builds on existing response spectra ground-motion models whose amplification factors empirically take into account the influence of the sedimentary layers through a standard parameterization. In the second approach, site-specific 1D amplification functions are computed from the 3D basin model. Using a random vibration theory approach, we adjust the empirical response spectra predicted for soft rock conditions by local site amplification factors: amplifications and associated ground-motions are predicted both in the Fourier and in the response spectra domain. In the third approach, hybrid physics-based ground-motion simulations are used to predict time histories for soft rock conditions which are subsequently modified using the 1D site-specific amplification functions computed in method 2. For large distances and at short periods, the differences between the three approaches become less notable due to the significant attenuation of the sedimentary layers. At intermediate and long periods, generic empirical ground-motion models provide lower levels of amplification from sedimentary soils compared to methods taking into account site-specific 1D amplification functions. In the near-source region, hybrid physics-based ground-motions models illustrate the potentially large variability of ground-motion due to finite source effects.