Refine
Year of publication
Document Type
- Article (34)
- Monograph/Edited Volume (1)
- Postprint (1)
Is part of the Bibliography
- yes (36)
Keywords
- aggregation (1)
- morphology (1)
- naphthalenediimide (1)
- organic photovoltaics (1)
- organic semiconductors (1)
Electron beam irradiation of poly(vinyl methyl ether) films : 1. Synthesis and film topography
(2005)
Temperature-sensitive hydrogel layers on silicon (Si) substrates were synthesized by electron beam irradiation of spin-coated poly(vinyl methyl ether) (PVME) films. The influences of the used solvent, the polymer concentration, and the spinning velocity on the homogeneity and the thickness of the PVME film were investigated. In the range of concentration c(p) = 1-15 wt% PVME in ethanol solution, homogeneous films with a thickness between d = 50 nm and 1.7 mu m were obtained. The films were cross-linked by electron beam irradiation under inert atmosphere and analyzed by sol-gel- analysis. The results were compared with bulkgels formed by electron beam irradiation of PVME in the dry state. The film topography was analyzed by high-resolution field emission scanning electron microscopy and atomic force microscopy. An islandlike structure in the dry, swollen, and shrunken state of the hydrogel films was observed
Three series of semiflexible and rigid main-chain polyesters containing photoreactive mesogenic units derived from p-phenylenediacrylic acid (PDA) and cinnamic acid have been synthesized by high-temperature polycondensation. The thermal and mesomorphic properties of the polymers have been determined. The photochemical behavior of polymer P-[1]-T, which contains a PDA unit, has been studied both in solution and in films. In solution, [2+2] photocycloaddition, E/Z photoisomerization, and photo-Fries rearrangement can take place. In contrast, the dominant process in spin-coated films is the [2+2] photocycloaddition reaction, which causes crosslinking of the polymer. In films, the photochemistry and induction of anisotropy are strongly influenced by the aggregation of the PDA phenylester unit. A dichroism of about 0.2 has been induced in films by irradiation with linearly polarized UV light, and thus the capability of these films to induce optical anisotropy and align liquid crystals has been demonstrated. Liquid-crystalline cells have been made with polarized irradiated films of P[1]-T as aligning layers. A commercial liquid-crystalline mixture has been used for this study, and a similar liquid-crystalline order determined by polarized Fourier transform infrared to a commercial cell with rubbed polyimide as an aligning layer has been detected. Because of crosslinking of the irradiated P[1]-T photoaligning layer, the photoinduced anisotropy is stable at high temperatures, and the liquid-crystalline molecules are insoluble in the irradiated polymer. (c) 2005 Wiley Periodicals, Inc
Organic materials have received considerable attention because of their large dipole moments and optical nonlinearities. The optically induced switching of material properties is important for studying the optoelectronic effects including second harmonic generation. Organic materials for photonic applications contain chromophore dipole which consist of acceptor and donor groups bridged by a delocalized pi-electron system. Both theoretical and experimental data show a reversible highly dipolar photoinduced intra molecular charge transfer in betaine type molecules accompanied by change of the sign and the value of the dipole moment. The arrangement of polar molecules in films is studied both by atom force microscopy and surface potential measurements. To understand the photo response of these materials, their spectroscopic and electrical properties are studied. The morphology and photoinduced surface potential switching of the self-assembled monolayers and polymer films are investigated. (c) 2005 Elsevier B.V. All rights reserved
Two basic morphologies of emeraldine base of polyaniline-transition metal salt complex films cast from N- methylpyrrolidinone solutions are described. The first morphology consists of grains and the other consists of loose aggregates, respectively. The correlation of the film morphology with formation of precipitate in the complex solution, kinetics of solvent evaporation from the cast film, amount of solvent entrapped in the film, film conductivity, and IR absorption spectra is shown. Two different mechanisms of the complex formation as a result of competition in the polymer- inorganic salt-solvent trio interactions are discussed; the first mechanism results in folding of macromolecules into compact coils being then a core of grains in the complex films, and the second mechanism leads to blending of the polymer chains with solvent giving rise to formation of loose aggregates. (c) 2005 Elsevier B.V. All rights reserved
Non-linear optical and electrical properties of polymer films obtained by dipole orientation of active units are reported. Novel polar oligomer with N-(indan-1,3-dion-2-yl)pyridinium betaine (IPB) as a side group is studied. Orientation of polar groups in oligomer thin films causes an increase of the photo-induced change of surface potential on irradiation in the region of photo-induced electron transfer (PIET) where the IPB group exhibits a reversible change of the value and sign of the dipole moment. At longer wavelengths, the value of the surface potential of the oligomer may be determined by transport of photo-generated charge carriers
The surface structures of crystals based on aromatic oxadiazoles were investigated by AFM. The crystal structure for 2,5-di(p-tolyl)-1,3,4-oxadiazole (DTO) differs from that of 2,5-di (4-methoxycarbonyl-phenyl)-1,3,4- oxadiazole (DMPO). In DMPO all molecules show parallel orientation to the surface in such a way that the surface is formed as well as by the nitrogen atoms of the heterocyclic rings and the methyl groups of the ester substituents. By contrast, the oxadiazole molecules in DTO crystals are oriented perpendicular to the crystal surface. The experimental data are interpreted by molecular modelling. It is shown that there is a difference between molecular structure of the surface, as detected by AFM, and the bulk structure determined by X-ray diffraction.
New aromatic poly(amide-ether)s (II) have been synthesized by solution polycondensation of various aromatic diamines having two ether bridges (I) with a diacid chloride containing silicon, namely bis(chlorocarbonylphenyl)- diphenyIsilane. These polymers are easy soluble in polar amidic solvents such as N-methylpyrrolidinone or dimethylformamide and can be cast into thin flexible films or coatings from such solutions. They show high thermal stability with initial decomposition temperature being above 400 °C. Their glass transition temperatures lie in the range of 220-250 °C, except for polymer He which did not show a clear Tg when heated in a differential scanning calorimetry experiment up to 300 °C. The large interval between the glass transition and decomposition temperatures of pnlymers Ia-Id could be advantageous for their processing via compression molding. The polymer coatings deposited by the spincoating, technique onto silicon wafers showed a very smooth, pinhole-free surface in atomic force microscopy investigations. The free-standing films of 20-30 mm thickness show low dielectric constant, in the range of 3.65-3.78, which is promising for future application as high performance dielectrics.
Thin films in the range of 50 nm to 10 mm thickness have been prepared from NMP solutions of silicon-containing polyphenylquinoxaline-amides which had been synthesized by the polycondensation reaction of aromatic diaminophenylquinoxalines with bis(p-chlorocarbonylphenyl)diphenylsilane. A spin-coating technique onto glass plates or onto silicon wafers was used to make the film, followed by gradual heating to remove the solvent. The resulting films were very smooth and free of pinholes when studied by atomic force microscopy (AFM). They showed a strong adhesion to silicon wafers, were thermally stable in air to above 400 °C and their dielectric constant was in the range of 3.5-3.7. Thermal treatment of the films was performed in order to induce crosslinking. Such treated films became completely insoluble in organic solvents, maintained their smoothness and strong adhesion to the silicon substrate, and did not show any Tg, in DSC experiments. Their FTIR spectra in reflection mode did not show any changes compared with the untreated films, meaning on the one hand that the polymers maintain their structural integrity at high temperature and on the other hand that the number of crosslinks was very low and could not be detected by IR spectroscopy.
In this second paper we describe the comprehensive structure investigations on multilayers of uranyl arachidate formed by Langmuir-Blodgett deposition from subphases of different pH on solid substrates by means of a combination of infrared spectroscopy, X-ray specular reflection, ellipsometry, and scanning force microscopy, The structure of these multilayers and their stability are obviously influenced by the subphase pH. The pH range of the acid to salt conversion determined for the Langmuir films is confirmed by the infrared spectroscopic data of the multilayers. While arachidic acid films, deposited from an uranyl acetate subphase of low pH, are found to have strongly distorted rough surface, the films of uranyl structure, The influence of the counterions on the alkyl chain conformation, chain packing, reorganization probability, and stability of the multilayer is discussed.