Refine
Has Fulltext
- no (68)
Year of publication
Document Type
- Article (68) (remove)
Language
- English (68)
Is part of the Bibliography
- yes (68)
Keywords
- Wind erosion (6)
- Biosilicification (4)
- Soil erosion (4)
- Biogenic silica (3)
- Computational fluid dynamics (2)
- Euglyphida (2)
- Grassland (2)
- Open source (2)
- SAMT (2)
- Si fractions (2)
Soil landscape research is faced with wide-ranging questions of soil erosion, precision farming, and agricultural risk management. Digital Soil Morphometrics is a powerful tool to provide respective answers or recommendations but requires soil data from the pedon-to-field scale with high horizontal and vertical resolutions, including the subsoil. We present an efficient sampling and measurement method for easily obtainable soil driving cores with low-destructive preparation. Elemental contents and soil organic and mineral matter composition were measured rapidly and in large numbers using a multi-sensor approach, i.e., visible and near infrared (Vis-NIR), diffuse reflectance infrared Fourier transform (DRIFT), and X-ray fluorescence (XRF) spectroscopy. The suitability of the approach with respect to three-dimensional soil landscape models was tested using soils along a slope representing different stages of erosion and deposition in a hummocky landscape under arable land use (Calcaric Regosols, Calcic Luvisols, Luvic Stagnosols, Gleyic-Colluvic Regosols). The combination of soil core sampling, pedological description, and three spectroscopic techniques enabled rapid determination and interpretation of horizontal and vertical spatial distributions of soil organic carbon (SOC), soil organic and mineral matter composition, as well as CaCO3, Fe, and Mn contents. Depth profiles for SOC, CaCO3, and Fe contents were suitable indicators for site-specific degrees of erosion and matter transport processes at the pedon-to-field scale. Fe and Mn profiles helped identifying zones of reductive and oxic domains in subsoils (gleyzation). Further methodical developments should implement plant-availability of nutrients, characterization of Fe oxides, and calibration of the spectroscopic techniques to field-moist samples.
Carbon (C) stored in soils represents the largest C pool of terrestrial ecosystems and consequently plays a crucial role in the global C cycle. So far, it is widely unclear to what extent different land uses and land use change influence soil C storage. The hummocky ground moraine landscape of northeastern Germany is characterized by distinct small-scale soil heterogeneity on the one hand, and intensive energy crop cultivation on the other. Both factors are assumed to significantly influence gaseous C exchange; as such, they likely drive soil organic carbon (SOC) stock dynamics in terrestrial agricultural ecosystems. To date, it is not clear to what extent N fertilization forms, which are associated with energy crop cultivation (e.g., application of biogas fermentation residues) and soil type relative to soil erosion state, influence soil C dynamics, nor is it clear whether one of these factors is more important than the other. To investigate the influence of soil erosion state and N fertilization form on soil C dynamics, we present dynamic and seasonal net ecosystem carbon balances (NECB) as a proxy for changes in soil organic carbon stocks. Measurements were conducted for maize (Zea mays L.) at five sites in the "CarboZALF-D" experimental field during the 2011 growing season. Measurement sites represent different soil erosion states (non-eroded Albic Luvisols, extremely eroded Calcaric Regosols and depositional Endogleyic Colluvic Regosols) and N fertilization forms (100% mineral fertilizer, 50% mineral and 50% organic fertilizer, and 100% organic fertilizer). Fertilization treatments were established on the Albic Luvisol. Net ecosystem CO2 exchange (NEE) and ecosystem respiration (R-eco) were measured every four weeks using a dynamic flow-through non-steady-state closed manual chamber system. Gap filling was performed based on empirical temperature and PAR dependency functions and was used to derive daily NEE values. In parallel, daily above-ground biomass production (NPFshoot) was estimated using a logistic growth equation, fitted on periodic biomass samples. Finally, C dynamics were calculated as the balance of daily NEE and NPPshoot based on the initial C input due to organic fertilization. Resulting NECB varied from pronounced soil C losses at the Endogleyic Colluvic Regosol (592 g C m(-2)) to soil C gains at the Calcaric Regosol (-124 g C m(-2)). Minor to modest C losses were observed for the Albic Luvisol. Compared to N fertilization forms, soil erosion states generally had a stronger impact on derived NECB. However, interannual variations in plant phonology and interactions between soil erosion states and fertilization forms might result in different NECB values over multiple years. Hence, long-term measurements of different fertilization treatments on characteristic soil landscape elements are needed.
Silicon is a beneficial element for many plants and is deposited in plant tissue as amorphous bio-opal called phytoliths. The biochemical processes of silicon uptake and precipitation induce isotope fractionation: the mass-dependent shift in the relative abundances of the stable isotopes of silicon. At the bulk scale, delta Si-30 ratios span from -2 to +6 parts per thousand. To further constrain these variations in situ, at the scale of individual phytolith fragments, we used femtosecond laser ablation multi-collector inductively coupled plasma-mass spectrometry (fsLA-MC-ICP-MS). A variety of phytoliths from grasses, trees and ferns were prepared from plant tissue or extracted from soil. Good agreement between phytolith delta Si-30 ratios obtained by bulk solution MC-ICP-MS analysis and in situ isotope ratios from fsLA-MC-ICP-MS validates the method. Bulk solution analyses result in at least twofold better precision for delta Si-30 (2s on reference materials <= 0.11 parts per thousand) over that found for the means of in situ analyses (2s typically <= 0.24 parts per thousand). We find that bushgrass, common reed and horsetail show large internal variations up to 2 parts per thousand in delta Si-30, reflecting the various pathways of silicon from soil to deposition. Femtosecond laser ablation provides a means to identify the underlying processes involved in the formation of phytoliths using silicon isotope ratios.
For bare soil conditions, the most important process driving and initiating splash and interrill erosion is the detachment of soil particles via raindrop impact. The kinetic energy of a rainfall event is controlled by the drop size and fall velocity distribution, which is often directly or indirectly implemented in erosion models. Therefore, numerous theoretical functions have been developed for the estimation of rainfall kinetic energy from available rainfall intensity measurements. The aim of this study is to assess differences inherent in a wide number of kinetic energy-rainfall intensity (KE-I) relations and their role in soil erosion modelling. Therefore, 32 KE-I relations are compared against measured rainfall energies based on optical distrometer measurements carried out at five stations of two substantially different rainfall regimes. These allow for continuous high-resolution (1-min) direct measurements of rainfall kinetic energies from a detailed spectrum of measured drop sizes and corresponding fall velocities. To quantify the effect of different KE-I relations on sediment delivery, we apply the erosion model WATEM/SEDEM in an experimental setup to four catchments of NE-Germany. The distrometer data shows substantial differences between measured and theoretical models of drop size and fall velocity distributions. For low intensities the number of small drops is overestimated by the Marshall and Palmer (1948; MP) drop size distribution, while for high intensities the proportion of large drops is overestimated by the MP distribution. The distrometer measurements show a considerable proportion of large drops falling at slower velocities than predicted by the Gunn and Kinzer (1949) terminal velocity model. For almost all rainfall events at all stations, the KE-I relations predicted higher cumulative kinetic energy sums compared to the direct measurements of the optical distrometers. The different KE-I relations show individual characteristics over the course of rainfall intensity levels. Our results indicate a high sensitivity (up to a range from 10 to 27 t ha(-1)) of the simulated sediment delivery related to different KE-I relations. Hence, the uncertainty associated with KE-I relations for soil erosion modelling is of critical importance.
Large-scale crop yield failures are increasingly associated with food price spikes and food insecurity and are a large source of income risk for farmers. While the evidence linking extreme weather to yield failures is clear, consensus on the broader set of weather drivers and conditions responsible for recent yield failures is lacking. We investigate this for the case of four major crops in Germany over the past 20 years using a combination of machine learning and process-based modelling. Our results confirm that years associated with widespread yield failures across crops were generally associated with severe drought, such as in 2018 and to a lesser extent 2003. However, for years with more localized yield failures and large differences in spatial patterns of yield failures between crops, no single driver or combination of drivers was identified. Relatively large residuals of unexplained variation likely indicate the importance of non-weather related factors, such as management (pest, weed and nutrient management and possible interactions with weather) explaining yield failures. Models to inform adaptation planning at farm, market or policy levels are here suggested to require consideration of cumulative resource capture and use, as well as effects of extreme events, the latter largely missing in process-based models. However, increasingly novel combinations of weather events under climate change may limit the extent to which data driven methods can replace process-based models in risk assessments.
Silicon (Si) is the second-most abundant element in the earth's crust. In the pedosphere, however, huge spans of Si contents occur mainly caused by Si redistribution in soil profiles and landscapes. Here, we summarize the current knowledge on the different pools and fluxes of Si in soils and terrestrial biogeosystems. Weathering and subsequent release of soluble Si may lead to (1) secondarily bound Si in newly formed Al silicates, (2) amorphous silica precipitation on surfaces of other minerals, (3) plant uptake, formation of phytogenic Si, and subsequent retranslocation to soils, (4) translocation within soil profiles and formation of new horizons, or (5) translocation out of soils (desilication). The research carried out hitherto focused on the participation of Si in weathering processes, especially in clay neoformation, buffering mechanisms for acids in soils or chemical denudation of landscapes. There are, however, only few investigations on the characteristics and controls of the low-crystalline, almost pure silica compounds formed during pedogenesis. Further, there is strong demand to improve the knowledge of (micro)biological and rhizosphere processes contributing to Si mobilization, plant uptake, and formation of phytogenic Si in plants, and release due to microbial decomposition. The contribution of the biogenic Si sources to Si redistribution within soil profiles and desilication remains unknown concerning the pools, rates, processes, and driving forces. Comprehensive studies considering soil hydrological, chemical, and biological processes as well as their interactions at the scale of pedons and landscapes are necessary to make up and model the Si balance and to couple terrestrial processes with Si cycle of limnic, fluvial, or marine biogeosystems
Precision farming needs management rules to apply spatially differentiated treatments in agricultural fields. Digital soil mapping (DSM) tools, for example apparent soil electrical conductivity, corrected to 25A degrees C (EC25), and digital elevation models, try to explain the spatial variation in soil type, soil properties (e.g. clay content), site and crop that are determined by landscape characteristics such as terrain, geology and geomorphology. We examined the use of EC25 maps to delineate management zones, and identified the main factors affecting the spatial pattern of EC25 at the regional scale in a study area in eastern Germany. Data of different types were compared: EC25 maps for 11 fields, soil properties measured in the laboratory, terrain attributes, geological maps and the description of 75 soil profiles. We identified the factors that influence EC25 in the presence of spatial autocorrelation and field-specific random effects with spatial linear mixed-effects models. The variation in EC25 could be explained to a large degree (R (2) of up to 61%). Primarily, soil organic matter and CaCO3, and secondarily clay and the presence of gleyic horizons were significantly related to EC25. Terrain attributes, however, had no significant effect on EC25. The geological map unit showed a significant relationship to EC25, and it was possible to determine the most important soil properties affecting EC25 by interpreting the geological maps. Including information on geology in precision agriculture could improve understanding of EC25 maps. The EC25 maps of fields should not be assumed to represent a map of clay content to form a basis for deriving management zones because other factors appeared to have a more important effect on EC25.
The hummocky post-glacial soil landscapes with kettle holes as internal drainage systems are characterized by ponds that trap lateral fluxes in topographic depressions. A quantitative description is mostly limited by the unknown complexity of hydraulically relevant soil and sediment structures. This paper is focussing on a structure-based approach to identify relevant field-scale flow and transport processes. Illustrative examples demonstrate extreme variations in water table fluctuation for adjoining kettle holes. Explanations require a pedohydrologic concept of the arable soil landscape. Identification of structures is based on geophysical methods and soil hydraulic measurements. Electrical resistivity imaging yields 0.5 m-scale spatial structures that correspond with soil texture distributions. Electromagnetic induction provides larger-scale field maps that reflect major soil and sediment features. Results of both methods correspond within the limits of the different spatial resolutions. With geophysical exploration methods, colluvial areas with textural differences between upper and deeper soil layers, coarse-textured sediment lenses, and stony colluvial regions around kettle holes are identified as potentially relevant flow structures. The colluvial fringe around the pond seems to be a sensitive area with important lateral exchange fluxes. Tensiometer measurements perpendicular to this boundary indicate hydraulic gradients directed from the pond towards the partially saturated soil. The localized infiltration of trapped water in kettle holes can control large fractions of ground water recharge and may have implications for the fate of agricultural chemicals in post-glacial landscapes. While surface and subsurface hydraulic structures may be inferred using minimal-invasive techniques, better understanding of processes and properties governing lateral exchange fluxes between pond and surrounding soil are required.
Content and binding forms of heavy metals, aluminium and phosphorus in bog iron ores from Poland
(2009)
Bog iron ores are widespread in Polish wetland soils used as meadows or pastures. They are suspected to contain high concentrations of heavy metals, which are precipitated together with Fe along a redox gradient. Therefore, soils with bog iron ore might be important sources for a heavy metal transfer from meadow plants into the food chain. However, this transfer depends on the different binding forms of heavy metals. The binding forms were quantified by sequential extraction analysis of heavy metals (Fe, Mn, Cr, Co, Ni, Cd, Pb) as well as Al and P on 13 representative samples of bog iron ores from central and southwestern Poland. Our results showed total contents of Cr, Co, Ni, Zn, Cd, and Pb not to exceed the natural values for sandy soils from Poland. Only the total Mn was slightly higher. The highest contents of all heavy metals have,been obtained in iron oxide fractions V (occluded in noncrystalline and poorly crystalline Fe oxides) and VI (occluded in crystalline Fe oxides). The results show a distinct relationship between the content of Fe and the quantity of Zn and Pb as well R Water soluble as well as plant available fractions were below the detection limit in most cases. From this we concluded bog iron ores not to be an actual, important source of heavy metals in the food chain. However, a remobilization of heavy metals might occur due to any reduction of iron oxides in bog iron ores, for example, by rising groundwater levels.
Separation of coarse organic particles from bulk surface soil samples by electrostatic attraction
(2009)
Different separation procedures are suggested for studying the stability and functionality of sod organic matter (OM). Density fractionation procedures using high-molarity, water-based salt solutions to separate organic particles may cause losses or transfers of C between particle and soluble OM fractions during separation, which may be a result of solution processes. The objective of this study was to separate coarse organic particles (>0.315 mm) from air- dried surface soil samples to avoid such solution processes as far as possible. Air-dried surface soil samples (<2 mm) from nine adjacent arable and forest sites were sieved into five soil particle size fractions (2-1.25, 1.25-0.8, 0.8- 0.5, 0.5-0.4, and 0.4-0.315 mm). Coarse organic particles were separated from each of these fractions using electrostatic attraction by a charged glass surface. The sum of the total dry matter content of the electrostatically separated coarse organic particles ranged from 0.05 to 140 g kg(-1). Scanning electron microscopy images and organic C (OC) analyses indicated, however, that the coarse organic particle fractions were also composed of 20 to 76% mineral particles (i.e., 200-760 g mineral kg(-1) fraction). The repeatability of the electrostatic attraction procedure falls within a range similar to that of accepted density fractionation methods using high-molarity salt solutions. Based on the similarity in repeatability, we suggest that the electrostatic attraction procedure will successfully remove coarse organic particles (>0.315 mm) from air-dried surface soil samples. Because aqueous solutions are not used, the electrostatic attraction procedure to separate coarse organic particles avoids C losses and transfers associated with solution-dependent techniques. Therefore, this method can be used as a pretreatment for subsequent density- or solubility-based soil OM fractionation procedures.