Refine
Year of publication
Document Type
- Article (108)
- Postprint (2)
- Review (2)
- Monograph/Edited Volume (1)
- Doctoral Thesis (1)
- Part of Periodical (1)
Is part of the Bibliography
- yes (115)
Keywords
- Langmuir monolayer (3)
- Oligo(epsilon-caprolactone) (2)
- ellipsometry (2)
- polyesterurethanes (2)
- spectroscopic ellipsometry (2)
- stem cell adhesion (2)
- 1,3,4-oxadiazole (1)
- 3,4-Propylenedioxythiophene (1)
- 3D electrode structures (1)
- AFM (1)
The new 3,4-propylenedioxythiophenes (ProDOT) bearing hydroxy- or chloro-functionalized side chains of varying length and polarity were synthesized and electropolymerized on single carbon fiber microelectrode (SCFME) using cyclo-voltammetry. Electrochemical impedance spectroscopy (EIS) revealed highest capacitance values for the hydroxy-functionalized Poly 5 carrying a side chain of medium length. The EIS data were fitted with an equivalent electrical circuit giving a good correlation. AFM analysis of the topography showed higher roughness values for Poly 5 than for the two other polymers bearing longer side chains. Due to their reactive end groups the polymers should be useful for post-polymerization functionalization of the electrode surface.
Translational diffusion of poly(1,4-phenylene-1,3,4-oxadiazole) in 96% H2S04 was studied, and the intrinsic viscosity of the polymer solution was measured in various stages of degradation at temperatures from 82 to 105°C. The rate constant of the degradation process was determined from variation of the molecular mass of the degradation products with time at a fixed solution temperature, and the activation energy of the process was calculated using the temperature dependence of the rate constant. The activation energy (E = 103 ± 7 kJ/mol) is lower than that for the hydrolysis of aromatic polyamides in sulfuric acid. According to the hydrodynamic data, the degree of coiling of the degradation products is the saine as that of the intact (non-degraded) macromolecules. This indicates that elements of the chernical structure responsible for the short-range order in the macromolecular chain are retained in the course of degradation.
Translational diffusion of the macromolecules, intrinsic viscosity and flow birefringence induced in dilute solutions of poly(1,3-phenylene-1,3,4-oxadiazole) (PMOD) in conc. sulphuric acid has been investigated. Molecular-weight dependences of hydrodynamic and dynamo-optical properties are established over the M range from 8.1 103 to 87 103. Experimental data agree well with the theories developed for translational friction and intrinsic viscosity of the wormlike chains with the following molecular parameters: mass per chain unit ML = 22.7 Dalton/Å, the Kuhn segment length A = 59 ± 4 Å, the chain diameter d = 4 ± 1.5 Å. Hindrance to intramolecular rotation is characterized by the parameter s = 1.7. The shear optical coefficient was found to be approximately 1.7 times lower the value of that obtained in the same solvent for the para-phenylene isomer of this polymer, being in good agreement with higher equilibrium flexibility of the PMOD molecule chains in solutions as determined herein from the hydrodynamic data.
Results are presented from structural and high-pressure investigations on four differently but symmetrically fluorine substituted 2,5di(phenyl)-1,3,4-oxadiazoles. The substitution pattern includes the para-, meta-, or ortho- substitution and the fully fluorinated 2,5-bis(pentafluorophenyl)-1,3,4-oxadiazole. The crystal structure depends on the molecular structure and results in a different high-pressure behavior. Parameters for the Murnaghan equation of state (EOS) are determined for every compound and the anisotropic pressure response of the crystal lattice is discussed. Although the EOS parameters, bulk modulus K. and its pressure derivative K'(o) are of the same order of magnitude for all four compounds, the anisotropy of strain is noticeably different. (c) 2005 Elsevier B.V. All rights reserved
Results of a high pressure x-ray study of 2,5-di(4-pyridyl)-1,3,4-oxadiazole up to 2.5 GPa are presented and discussed. Parameters for the Murnaghan equation of state are derived. The bulk modulus amounts to K-0 = 4.6 +/- 0.3 GPa and its pressure derivative to K-0' = 7.4 +/- 0.6. These values are comparable to values of other diphenyl-1,3,4- oxadiazoles. The anisotropy of the compression is analysed using the strain tensor and discussed based on the anisotropy of the intermolecular interactions
New heterocyclic polyamides have been synthesized by solution polycondensation of aromatic diamines containing phenyl- quinoxaline units with diacid chlorides having both imide and hexafluoroisopropylidene (6F) groups. These polymers are soluble in polar aprotic solvents, such as N-methylpyrrolidone (NMP) or N,N-dimethylformamide (DMF), and can be cast into flexible thin films from solutions. They show high thermooxidative stability with decomposition temperatures above 400°C and glass transition temperatures in the range of 225 - 300°C. The polymer films exhibit good chemical resistance towards deluted acids and good electrical insulating properties with dielectric constants in the range of 3.2 - 3.7.
Herstellung und Charakterisierung geordneter ultradünner Poly(arylen- 1,3,4-oxadiazol) Schichten
(1996)
An increase in random molecular vibrations of a solid owing to heating above the melting point leads to a decrease in its long-range order and a loss of structural symmetry. Therefore conventional liquids are isotropic media. Here we report on a light-induced isothermal transition of a polymer film from an isotropic solid to an anisotropic liquid state in which the degree of mechanical anisotropy can be controlled by light. Whereas during irradiation by circular polarized light the film behaves as an isotropic viscoelastic fluid, it shows considerable fluidity only in the direction parallel to the light field vector under linear polarized light. The fluidization phenomenon is related to photoinduced motion of azobenzene-functionalized molecular units, which can be effectively activated only when their transition dipole moments are oriented close to the direction of the light polarization. We also describe here how the photofluidization allows nanoscopic elements of matter to be precisely manipulated
Polymeric biomaterials are of specific relevance in medical and pharmaceutical applications due to their wide range of tailorable properties and functionalities. The knowledge about interactions of biomaterials with their biological environment is of crucial importance for developing highly sophisticated medical devices. To achieve optimal in vivo performance, a description at the molecular level is required to gain better understanding about the surface of synthetic materials for tailoring their properties. This is still challenging and requires the comprehensive characterization of morphological structures, polymer chain arrangements and degradation behaviour. The review discusses selected aspects for evaluating polymeric biomaterial-environment interfaces by Langmuir monolayer methods as powerful techniques for studying interfacial properties, such as morphological and degradation processes. The combination of spectroscopic, microscopic and scattering methods with the Langmuir techniques adapted to polymers can substantially improve the understanding of their in vivo behaviour.
The influence of terminal functionalization of oligo(epsilon-caprolactone)s (OCL) with phenylboronic acid pinacol ester or phenylboronic acid on the enzymatic degradation behavior at the air-water interface is investigated by the Langmuir monolayer degradation technique. While the unsubstituted OCL immediately degrades after injection of the enzyme lipase from Pseudomonas cepacia, enzyme molecules are incorporated into the films based on end-capped OCL before degradation. This incorporation of enzymes does not inhibit or suppress the film degradation, but retards it significantly. A specific binding of lipase to the polymer monolayer allows studying the enzymatic activity of bound proteins and the influence on the degradation process. The functionalization of a macromolecule with phenyl boronic acid groups is an approach to investigate their interactions with diol-containing biomolecules like sugars and to monitor their specified impact on the enzymatic degradation behavior at the air-water interface.
Enhancement of human induced pluripotent stem cells adhesion through multilayer laminin coating
(2019)
Bioengineered cell substrates are a highly promising tool to govern the differentiation of stem cells in vitro and to modulate the cellular behavior in vivo. While this technology works fine for adult stem cells, the cultivation of human induced pluripotent stem cells (hiPSCs) is challenging as these cells typically show poor attachment on the bioengineered substrates, which among other effects causes substantial cell death. Thus, very limited types of surfaces have been demonstrated suitable for hiPSC cultures. The multilayer coating approach that renders the surface with diverse chemical compositions, architectures, and functions can be used to improve the adhesion of hiPSCs on the bioengineered substrates. We hypothesized that a multilayer formation based on the attraction of molecules with opposite charges could functionalize the polystyrene (PS) substrates to improve the adhesion of hiPSCs. Polymeric substrates were stepwise coated, first with dopamine to form a polydopamine (PDA) layer, second with polylysine and last with Laminin-521. The multilayer formation resulted in the variation of hydrophilicity and chemical functionality of the surfaces. Hydrophilicity was detected using captive bubble method and the amount of primary and secondary amines on the surface was quantified by fluorescent staining. The PDA layer effectively immobilized the upper layers and thereby improved the attachment of hiPSCs. Cell adhesion was enhanced on the surfaces coated with multilayers, as compared to those without PDA and/or polylysine. Moreover, hiPSCs spread well over this multilayer laminin substrate. These cells maintained their proliferation capacity and differentiation potential. The multilayer coating strategy is a promising attempt for engineering polymer-based substrates for the cultivation of hiPSCs and of interest for expanding the application scope of hiPSCs.