Refine
Year of publication
Document Type
- Article (108)
- Postprint (2)
- Review (2)
- Monograph/Edited Volume (1)
- Doctoral Thesis (1)
- Part of Periodical (1)
Is part of the Bibliography
- yes (115)
Keywords
- Langmuir monolayer (3)
- Oligo(epsilon-caprolactone) (2)
- ellipsometry (2)
- polyesterurethanes (2)
- spectroscopic ellipsometry (2)
- stem cell adhesion (2)
- 1,3,4-oxadiazole (1)
- 3,4-Propylenedioxythiophene (1)
- 3D electrode structures (1)
- AFM (1)
- Bioelectrocatalysis (1)
- Brewster angle microscopy (1)
- Carbon fiber (1)
- Conjugated polymeric thin film (1)
- Crystallization (1)
- Diphenyl-1,3,4-oxadiazole (1)
- Diphenyl-oxadiazoles (1)
- Direct electron transfer (1)
- EIS (1)
- Electroactive Conjugated Polymer (1)
- Electrochemical impedance spectroscopy (1)
- Enzymatic degradation (1)
- Enzymatic polymer degradation (1)
- Fluorescence quantum yield (1)
- HTHP (1)
- Immobilization (1)
- Langmuir layers (1)
- Langmuir monolayer degradation technique (1)
- Langmuir technique (1)
- Langmuir-Schaefer method (1)
- Langmuir-Schafer films (1)
- Multiblock copolymer (1)
- Multiwalled carbon nanotube (1)
- Nanohybrid (1)
- Nanostructure (1)
- OLED (1)
- Oligo(omega-pentadecalactone) (1)
- Optical properties (1)
- PBD (1)
- PQQ-GDH (1)
- PQQ-dependent glucose dehydrogenase (1)
- Packing motif (1)
- Polymer architecture (1)
- Polymeric substrate (1)
- Poylaniline (1)
- Sulfonated polyaniline (1)
- X-ray structure (1)
- acetylcholinesterase (1)
- air - water interface (1)
- basement membrane (1)
- biodegradable polymers (1)
- bioelectrochemistry (1)
- biomaterial characterization (1)
- biomimetic sensors (1)
- block-copolymer (1)
- brewster angle microscopy (1)
- cell adhesion (1)
- cell culture (1)
- chemical oxidative polymerization (1)
- collagen-IV (1)
- conductive polymer (1)
- controlled-release (1)
- cross-linking (1)
- crystal structure (1)
- crystallization (1)
- direct bioelectrocatalysis (1)
- ellipsometric mapping (1)
- enzymatic degradation (1)
- enzyme bioelectrocatalysis (1)
- fibronectin (1)
- films (1)
- hydrogen bonds (1)
- induced pluripotent stem cells (1)
- langmuir monolayer (1)
- langmuir monolayers (1)
- macroITO (1)
- macroporous ITO electrodes (1)
- molecular conformation (1)
- molecularly imprinted electropolymers (1)
- morphology (1)
- nanocarriers (1)
- pH-dependent electrochemistry (1)
- particle morphology (1)
- peripheral anionic site (1)
- poly(epsilon-caprolactone) (1)
- poly(ester amide)s (1)
- poly[(rac-lactide)-co-glycolide] (1)
- polyester (1)
- polymer degradation (1)
- polypyrrole (1)
- predictive characterization tools (1)
- propidium (1)
- protein (1)
- protein Langmuir layers (1)
- protein adsorption (1)
- root mean square roughness (1)
- sulfonated polyanilines (1)
- surface coating (1)
- two dimensional network (1)
- xanthine dehydrogenase (1)
The surface structures of crystals based on aromatic oxadiazoles were investigated by AFM. The crystal structure for 2,5-di(p-tolyl)-1,3,4-oxadiazole (DTO) differs from that of 2,5-di (4-methoxycarbonyl-phenyl)-1,3,4- oxadiazole (DMPO). In DMPO all molecules show parallel orientation to the surface in such a way that the surface is formed as well as by the nitrogen atoms of the heterocyclic rings and the methyl groups of the ester substituents. By contrast, the oxadiazole molecules in DTO crystals are oriented perpendicular to the crystal surface. The experimental data are interpreted by molecular modelling. It is shown that there is a difference between molecular structure of the surface, as detected by AFM, and the bulk structure determined by X-ray diffraction.
Poly(1,3,4-oxadiazole)s have been the focus of considerable interest with regard to the- production of high- performance materials, particularly owing to their high thermal stability in oxidative atmosphere and specific properties determined by the structure of 1,3,4-oxadiazole ring, which, from the spectral and electronic points of view, is similar to a p-phenylene structure.[1] Besides their excellent resistance to high temperature, polyoxadiazoles have many desirable characteristics, such as good hydrolytic stability, high glass transition temperatures, low dielectric constants, and tough mechanical properties. Some polyoxadiazoles have semiconductive properties, other structures can be electrochemically doped and thus made conductive, and other have liquid-crystalline properties, which make them very attractive for a wide range of high-performance applications. They exhibit excellent fiber- and film-forming capabilities, thus being considered for use as heat-resistant reinforcing fibers for advanced composite materials, highly resistant fabrics for the filtration of hot gases, special membranes for gas separation or reverse osmosis, precursors for highly oriented graphite fibers, films, and blocks to be used in the construction of electronic instruments based on X-rays, neutron beams, or a-particles, or in the construction of nuclear reactor walls. Since they were first reported in 1961,[2] a wide variety of polymers containing 1,3,4-oxadiazole rings have been synthesized, and their preparation, characterization, and physico-mechanical properties have been periodically reviewed .[3-8] This article will present a general overview of this class of polymers and will refer to the work carried out by different researchers in the last ten years with the emphasis on the potential uses of such polymers as advanced materials.
Two series of aromatic polyamides incorporating silicon together with phenylquinoxaline or with hexafluoroisopropylidene groups have been synthesized and their properties have been characterized and compared with those of related polymers. These polymers are easily soluble in polar amidic solvents such as N-rnethyl-2-pyrrolidinone and dimethylformamide, and in tetrahydrofuran, and can be cast into thin, transparent films from solution. The polyamides have weight- and number-average molecular weights in the range of 10000-40000 and 3000-6000, respectively, and polydispersities in the range of 3-10. They show glass transition temperatures in the range of 236 °C-275 °C and decomposition temperatures above 400 °C. The polymer films have low dielectric constants in the range of 3.26-3.68, and good mechanical properties (tensile strength 74-100 MPa, tensile modulus 180-386 MPa), thus being comparable with other high performance dielectrics.
Poly[(1,4-naphthalene)-2,5-diyl-1,3,4-oxadiazole] and poly[(2,6-naphthalene)-2,5-diyl-1,3,4-oxadiazole] have been synthesized and investigated in conc. H2S04, by the flow birefringence method in comparison with poly(1,4- phenylene)-2,5-diyl-1,3,4-oxadiazole]. Changes in conformation parameters and optical anisotropy of a chain unit induced by incorporation of the naphthalene groups into the macromolecule backbone have been evaluated.
New heterocyclic polyamides have been synthesized by solution polycondensation of aromatic diamines containing phenyl- quinoxaline units with diacid chlorides having both imide and hexafluoroisopropylidene (6F) groups. These polymers are soluble in polar aprotic solvents, such as N-methylpyrrolidone (NMP) or N,N-dimethylformamide (DMF), and can be cast into flexible thin films from solutions. They show high thermooxidative stability with decomposition temperatures above 400°C and glass transition temperatures in the range of 225 - 300°C. The polymer films exhibit good chemical resistance towards deluted acids and good electrical insulating properties with dielectric constants in the range of 3.2 - 3.7.
Flow birefringence induced in dilute solutions of poly[(1,4-naphthylene)-2,5-diyl-1,3,4-oxadiazole] and poly[2,6-naphthylene)-2,5-diyl-1,3,4-oxadiazole] in conc. sulphuric acid has been investigated. The shear optical coefficient was found for these polymers to be approximately double the value of that obtained in the same solvent for poly[(para-phenylene) -2,5-diyl-1,3,4-oxadiazole]. Rigid-chain behaviour of the polymers was characterized by hydrodynamic and dynamo-optical parameters evaluated with application of the worm-like chain model and the "method of similar structures". Change in optical anisotropy of a chain unit induced by incorporation of naphthylene groups into the main chain has been evaluated.
New aromatic poly(1,3,4-oxadiazole)s were synthesized having excellent film forming properties due to their solubility in common organic solvents. The investigated new polyoxadiazoles can be used as emission material in single layer LED. The poly- oxadiazoles show an emission in the range of blue to yellow light. The external quantum efficiency as well as the turn-on voltage of the devices are influenced when blends of the polyoxadiazole with hole transport materials are used.
A series of aromatic polyamides incorporating silicon together with phenylquinoxaline or with hexafluoroisopropylidene groups has been synthesized by solution polycondensation of a silicon-containing diacid chloride with aromatic diamines having phenylquinoxaline rings or hexafluoroisopropylidene groups. These polymers are easily soluble in polar aprotic solvents, such as N-methylpyrrolidinone and dimethylformamide, and in tetrahydrofurane, and can be solution-cast into thin, transparent films having low dielectric constant, in the range of 3.26 to 3.68. These polymers show high thermal stability with decomposition temperature being above 400 °C and glass transition temperature in the range of 236 °C to 275 °C.
Herstellung und Charakterisierung geordneter ultradünner Poly(arylen- 1,3,4-oxadiazol) Schichten
(1996)
The electrochemical behaviour of new amphiphilic 1,3,4-oxadiazoles were studied by cyclic voltammetry. The influence of the supra- molecular structure on the redox behaviour in liquid or solid solutions, in Langmuir-Blodgett multilayers, and in amorphous films is investigated in detail. The reversible reduction of amphiphilic 2,5-diarylene- 1,3,4-oxadiazoles is significantly influenced by substituents in the para position of the phenylene ring. In the solid states the reduction peak potentials are shifted to more negative values compared to data measured in solution. This shift increases as the film thickness is increased. An influence of the supramolecular order in the solid films was not found. In-situ UV-vis spectroelectrochemistry of LB-multilayers deposited onto indium tin oxide (ITO) glass give evidence for the formation of radical anions in the highly ordered layer.
The translational diffusion coefficient and intrinsic viscosity of poly(1,4-phenylene-1,3,4-oxadiazole) molecules in 96% H2S04 have been determined at different stages of degradation of the molecules in acid solution at temperature ranging from 82 to 105 °C. The degradation rate constant, k, has been obtained from the change in the molecular weight, M, of the product degraded in solution with time at high temperature. The activation energy of the hydrolysis process was 103 ± 7 kJmol-1, which is smaller than that of aromatic polyamides in the same solvent. According to our hydrodynamic data, the degree of coiling of the molecules of degraded products does not differ from that of undegraded samples, and our conclusion was that the degradation is not accompanied with a noticeable change in the short- range interactions in the molecular chain and may be understood as a random chain scission.
Translational diffusion of poly(1,4-phenylene-1,3,4-oxadiazole) in 96% H2S04 was studied, and the intrinsic viscosity of the polymer solution was measured in various stages of degradation at temperatures from 82 to 105°C. The rate constant of the degradation process was determined from variation of the molecular mass of the degradation products with time at a fixed solution temperature, and the activation energy of the process was calculated using the temperature dependence of the rate constant. The activation energy (E = 103 ± 7 kJ/mol) is lower than that for the hydrolysis of aromatic polyamides in sulfuric acid. According to the hydrodynamic data, the degree of coiling of the degradation products is the saine as that of the intact (non-degraded) macromolecules. This indicates that elements of the chernical structure responsible for the short-range order in the macromolecular chain are retained in the course of degradation.
New aromatic poly(amide-ether)s (II) have been synthesized by solution polycondensation of various aromatic diamines having two ether bridges (I) with a diacid chloride containing silicon, namely bis(chlorocarbonylphenyl)- diphenyIsilane. These polymers are easy soluble in polar amidic solvents such as N-methylpyrrolidinone or dimethylformamide and can be cast into thin flexible films or coatings from such solutions. They show high thermal stability with initial decomposition temperature being above 400 °C. Their glass transition temperatures lie in the range of 220-250 °C, except for polymer He which did not show a clear Tg when heated in a differential scanning calorimetry experiment up to 300 °C. The large interval between the glass transition and decomposition temperatures of pnlymers Ia-Id could be advantageous for their processing via compression molding. The polymer coatings deposited by the spincoating, technique onto silicon wafers showed a very smooth, pinhole-free surface in atomic force microscopy investigations. The free-standing films of 20-30 mm thickness show low dielectric constant, in the range of 3.65-3.78, which is promising for future application as high performance dielectrics.
Thin films in the range of 50 nm to 10 mm thickness have been prepared from NMP solutions of silicon-containing polyphenylquinoxaline-amides which had been synthesized by the polycondensation reaction of aromatic diaminophenylquinoxalines with bis(p-chlorocarbonylphenyl)diphenylsilane. A spin-coating technique onto glass plates or onto silicon wafers was used to make the film, followed by gradual heating to remove the solvent. The resulting films were very smooth and free of pinholes when studied by atomic force microscopy (AFM). They showed a strong adhesion to silicon wafers, were thermally stable in air to above 400 °C and their dielectric constant was in the range of 3.5-3.7. Thermal treatment of the films was performed in order to induce crosslinking. Such treated films became completely insoluble in organic solvents, maintained their smoothness and strong adhesion to the silicon substrate, and did not show any Tg, in DSC experiments. Their FTIR spectra in reflection mode did not show any changes compared with the untreated films, meaning on the one hand that the polymers maintain their structural integrity at high temperature and on the other hand that the number of crosslinks was very low and could not be detected by IR spectroscopy.