Refine
Has Fulltext
- no (26) (remove)
Year of publication
Document Type
- Article (26)
Is part of the Bibliography
- yes (26)
Keywords
- Ferroelectret (1)
- Ferroelectrets (1)
- Paschen's law (1)
- Polymer (1)
- Thermal diffusivity (1)
- Thermal wave method (1)
- Thermoplastics (1)
- dielectric barrier discharge (DBD) (1)
- dielectric barrier discharges (1)
- effective polarization (1)
Institute
Space-charge depth profiles in various electret polymers have been measured in both the time and the frequency domain using thermal pulses and waves, respectively. A comparison of the two techniques on corona-charged polytetrafluoroethylene showed that the thermal-pulse method yielded similar results as the thermal-wave technique, but approximately 20-50 times faster. The article discusses sensitivity limitations as well as possible applications, including the real-time monitoring of space-charge decay under UV irradiation. (C) 2005 American Institute of Physics
Breakdown threshold of dielectric barrier discharges in ferroelectrets where Paschen's law fails
(2011)
The piezoelectric activity of charged cellular foams (so-called ferroelectrets) is compared against simulations based on a multi-layer electromechanical model and Townsend's model of Paschen breakdown, with the distribution of void heights determined from scanning electron micrographs. While the calculated space charge hysteresis curves are in good agreement with experimental data, the onset of piezoelectric activity is observed at significantly higher electric fields than predicted by Paschen's law. One likely explanation is that the commonly accepted Paschen curve for electric breakdown in air poorly describes the critical electric field for dielectric barrier discharges in micrometer-size cavities.
Dielectric spectra of a partially fluorinated chromophore / amorphous Teflon AF guest-host system
(1999)
Zerstörungsfreie Tomographie von Raumladungs- und Polarisationsverteilungen mittles Wärmepulsen
(2007)
Non-destructive, three-dimensional imaging of space-charge and polarization distributions in electret materials has been implemented by means of laser-induced thermal pulses. In pyroelectric films of poled poly(vinylidene fluoride), images of up to 45 x 45 pixels with a depth resolution of less than 0.5 mu m and a lateral resolution of 40 mu m were recorded, the latter being limited by fast thermal diffusion in the absorbing metallic front electrode. Initial applications include the analysis of polarization distributions in corona-poled piezoelectric sensor cables and the detection of patterned space-charge distributions in polytetrafluoroethylene films.
The stability of space charge in electrets such as polytetrafluoroethylene (PTFE), polyethylene terephthalate (PETP) and polypropylene (PP) under ultraviolet irradiation has been investigated using photostimulated discharge spectroscopy. While only weak discharge currents were observed in PTFE coated with semitransparent gold electrodes, up to 15 pA/cm(2) were found in PETP around the UV absorption edge near 310 nm. Space charge profiles obtained with the piezoelectrically generated pressure step method indicate that near-surface charges were almost completely removed. In PP foam, recent findings of a UV-reduced d(33) coefficient were confirmed for exposure times of up to 3.5 h, and a discharge peak at 200 urn could be assigned to the charges stored on the surfaces of the voids. The unique morphology and the (quasi-) piezoelectric properties of cellular PP make it a role model for the future investigation of charge storage in electrets
The thermal-wave technique or laser-intensity modulation method is an important tool for the non-destructive probing of space-charge and polarization profiles in electrets. Analysing the experimental data requires solving a Fredholm integral equation which is known to be an ill-conditioned problem. This paper presents an iterative approach that is capable of reconstructing inherently unsmooth distributions. The deviations from the true profiles are slightly smaller than those obtained with Tikhonov regularization, while the computational burden is not a limiting factor on modem personal computers. The optimum number of iterations is estimated using the randomized generalized cross- validation technique. Results are shown for a number of model distributions, as well as for experimental data from a layered polyvinylidene fluoride film sandwich
A package of programs written using the symbolic mathematics program, Mathematicatrademark, has been developed. Its principal usage is in teaching the LIMM method to students and demonstrating data analysis by means of the Polynomial Regularization Method (PRM). A large number of variables can be changed in the program and their effects can be shown graphically. Students at the University of Potsdam and Monash University have used the program successfully