Refine
Year of publication
Language
- English (72) (remove)
Keywords
- Body waves (7)
- Seismologie (6)
- Seismology (6)
- Earthquake source observations (5)
- Erdbeben (5)
- Seismicity and tectonics (5)
- Theoretical seismology (4)
- Array Seismology (3)
- Arrayseismologie (3)
- Crustal structure (3)
The majority of original seismograms recorded at the very beginning of instrumental seismology (the early 1900s) did not survive till present. However, a number of books, bulletins, and catalogs were published including the seismogram reproductions of some, particularly interesting earthquakes. In case these reproductions contain the time and amplitude scales, they can be successfully analyzed the same way as the original records. Information about the Atushi (Kashgar) earthquake, which occurred on August 22, 1902, is very limited. We could not find any original seismograms for this earthquake, but 12 seismograms from 6 seismic stations were printed as example records in different books. These data in combination with macroseismic observations and different bulletins information published for this earthquake were used to determine the source parameters of the earthquake. The earthquake epicenter was relocated at 39.87A degrees N and 76.42A degrees E with the hypocenter depth of about 18 km. We could further determine magnitudes m (B) = 7.7 +/- 0.3, M (S) = 7.8 +/- 0.4, M (W) = 7.7 +/- 0.3 and the focal mechanism of the earthquake with strike/dip/rake - 260A degrees +/- 20/30A degrees +/- 10/90A degrees +/- 10. This study confirms that the earthquake likely had a smaller magnitude than previously reported (M8.3). The focal mechanism indicates dominant thrust faulting, which is in a good agreement with presumably responsible Tuotegongbaizi-Aerpaleike northward dipping thrust fault kinematic, described in previous studies.
A series of large-magnitude earthquakes above 6.9 occurred in the northern Tien-Shan between 1885 and 1911. The Chilik earthquake of 11 July 1889, has been listed with a magnitude of 8.3, based on sparse macroseismic intensities, constrained by reported damage. Despite the existence of several juvenile fault scarps in the epicentral region, that are possibly associated with the 1889 earthquake, no through-going surface rupture having the dimensions expected for a magnitude 8.3 earthquake has been located - a puzzling dilemma. Could the magnitude have been overestimated? This would have major implications not only for the understanding of the earthquake series, but also for regional hazard estimates. Fortunately, a fragmentary record from an early Rebeur-Paschwitz seismometer exists for the Chilik event, recorded in Wilhelmshaven (Germany). To constrain the magnitude, we compare the late coda waves of this record with those of recent events from Central Asia, recorded on modern instruments in Germany and filtered with Rebeur-Paschwitz instrument characteristics. Additional constraints come from disturbances of historic magnetograms that exist from the Chilik and the 1911 Chon-Kemin earthquakes. Scaling of these historic records confirm a magnitude of about 8 for the 1889 Chilik earthquake, pointing towards a lower crustal contribution to the fault area.
Receiver functions are a good tool to investigate the seismotectonic structure beneath the a seismic station. In this study we apply the method to stations situated on or near Sumatra to find constraints on a more detailed velocity model which should improve earthquake localisation. We estimate shallow Moho-depths (~ 21 km) close to the trench and depths of ~30 km at greater distances. First evidences for the dip direction of the slab of ~60° are provided. Receiver functions were calculated for 20 stations for altogether 110 earthquakes in the distance range between 30° and 95° from the receiver. However the number of receiver functions per station is strongly variable as it depends on the installation date, the signal-to-noise-ratio of the station and the reliability of the acquisition.
An der Universität Potsdam wird seit 2008 ein automatisiertes Verfahren angewandt, um Bruchparamter großer Erdbeben in quasi-Echtzeit, d.h. wenige Minuten nachdem sich das Beben ereignet hat, zu bestimmen und der Öffentlichkeit via Internet zur Verfügung zu stellen. Es ist vorgesehen, das System in das Deutsch-Indonesische Tsunamifrühwarnsystem (GITEWS) zu integrieren, für das es speziell konfiguriert ist. Wir bestimmen insbesondere die Dauer und die Ausdehnung des Erdbebens, sowie dessen Bruchgeschwindigkeit und -richtung. Dabei benutzen wir die Seismogramme der zuerst eintreffenden P Wellen vom Breitbandstationen in teleseimischer Entfernung vom Beben sowie herkömmliche Arrayverfahren in teilweise modifizierter Form. Die Semblance wir als Ähnlichkeitsmaß verwendet, um Seismogramme eines Stationsnetzes zu vergleichen. Im Falle eines Erdbebens ist die Semblance unter Berücksichtigung des Hypozentrums zur Herdzeit und während des Bruchvorgangs deutlich zeitlich und räumlich erhöht und konzentriert. Indem wir die Ergebnisse verschiedener Stationsnetzwerke kombinieren, erreichen wir Unabhängigkeit von der Herdcharakteristik und eine raum-zeitliche Auflösung, die es erlaubt die o.g. Parameter abzuleiten. In unserem Beitrag skizzieren wir die Methode. Anhand der beiden M8.0 Benkulu Erdbeben (Sumatra, Indonesien) vom 12.09.2007 und dem M8.0 Sichuan Ereignis (China) vom 12.05.2008 demonstrieren wir Auflösungsmöglichkeiten und vergleichen die Ergebnisse der automatisierten Echtzeitanwendung mit nachträglichen Berechnungen. Weiterhin stellen wir eine Internetseite zur Verfügung, die die Ergebnisse präsentiert und animiert. Diese kann z.B. in geowissenschaftlichen Einrichtungen an Computerterminals gezeigt werden. Die Internetauftritte haben die folgenden Adressen: http://www.geo.uni-potsdam.de/arbeitsgruppen/Geophysik_Seismologie/forschung/ruptrack/openday http://www.geo.uni-potsdam.de/arbeitsgruppen/Geophysik_Seismologie/forschung/ruptrack
We use seismic array methods (semblance analysis) to image areas of seismic energy release in the Sunda Arc region and world-wide. Broadband seismograms at teleseismic distances (30° ≤ Δ ≤ 100°) are compared at several subarrays. Semblance maps of different subarrays are multiplied. High semblance tracked over long time (10s of second to minutes) and long distances indicate locations of earthquakes. The method allows resolution of rupture characteristics important for tsunami early warning: start and duration, velocity and direction, length and area. The method has been successfully applied to recent and historic events (M>6.5) and is now operational in real time. Results are obtained shortly after source time, see http://www.geo.uni-potsdam.de/Forschung/Geophysik/GITEWS/tsunami.htm). Comparison of manual and automatic processing are in good agreement. Computational effort is small. Automatic results may be obtained within 15 - 20 minutes after event occurrence.
We study the rupture propagation of the 2008/05/12 Ms8.0 Wenchuan Earthquake. We apply array techniques such as semblance vespagram analysis to P waves recorded at seismic broadband station within 30-100° epicentral distance. By combination of multiple large aperture station groups spatial and temporal resolution is enhanced and problems due source directivity and source mechanism are avoided. We find that seismic energy was released for at least 110 s. Propagating unilaterally at sub-shear rupture velocity of about 2.5 km/s in NE direction, the earthquake reaches a lateral extent of more than 300 km. Whereas high semblance during within 70 s from rupture start indicates simple propagation more complex source processes are indicated thereafter by decreases coherency in seismograms. At this stage of the event coherency is low but significantly above noise level. We emphasize that first result of our computations where obtain within 30 minutes after source time by using an atomized algorithm. This procedure has been routinely and globally applied to major earthquakes. Results are made public through internet.
Traveltime residuals for worldwide seismic stations are calculated. We use P and S waves from earthquakes in SE-Asia at teleseismic and regional distances. The obtained station residuals help to enhance earthquake localisation. Furthermore we calculated regional source dependent station residuals. They show a systematic dependence of the locality of the source. These source dependent residuals reflect heterogenities along the path and can be used for a refinement of earthquake localisation.
We present a high-resolution study of the upper mantle structure of Central Europe, including the western part of the East European Platform, based on S-receiver functions of 345 stations. A distinct contrast is found between Phanerozoic Europe and the East European Craton across the Trans-European Suture Zone. To the west, a pronounced velocity reduction with depth interpreted as lithosphere-asthenosphere boundary (LAB) is found at an average depth of 90 km. Beneath the craton, no strong and continuous LAB conversion is observed. Instead we find a distinct velocity reduction within the lithosphere, at 80-120 km depth. This mid-lithospheric discontinuity (MLD) is attributed to a compositional boundary between depleted and more fertile lithosphere created by late Proterozoic metasomatism. A potential LAB phase beneath the craton is very weak and varies in depth between 180 and 250 km, consistent with a reduced velocity contrast between the lower lithosphere and the asthenosphere. Within the Trans-European Suture Zone, lithospheric structure is characterized by strong heterogeneity. A dipping or step-wise increase to LAB depth of 150 km is imaged from Phanerozoic Europe to 20-22 degrees E, whereas no direct connection to the cratonic LAB or MLD to the east is apparent. At larger depths, a positive conversion associated with the lower boundary of the asthenosphere is imaged at 210-250 km depth beneath Phanerozoic Europe, continuing down to 300 km depth beneath the craton. Conversions from both 410 km and 660 km discontinuities are found at their nominal depth beneath Phanerozoic Europe, and the discontinuity at 410 km depth can also be traced into the craton. A potential negative conversion on top of the 410 km discontinuity found in migrated images is analyzed by modeling and attributed to interference with other converted phases.
The P and S wave velocity structure of the D" layer beneath the southwestern Pacific was investigated by using short-period data from 12 deep events in the Tonga-Fiji region recorded by the J-Array and the Hi-net (two large- aperture seismic arrays) in Japan. Reflected wave beam forming (RWB) and a migration method were used to extract weak signals originating from heterogeneities in the lowermost mantle. In order to acquire high resolution a double-array method was applied to the data. The results of the RWB method indicate that seismic energy is reflected at discontinuities near the depths of 2520 and 2650 km, which have a negative P wave velocity contrast of 1% at the most. In addition, there is a positive seismic discontinuity at a depth of 2800 km. In the case of the S wave, reflected energy is produced almost at the same depth (2550 km depth). An apparent depth shift (50 km) of the discontinuity at the depth of 2850 km may indicate that the S wave velocity reduction in the lowermost mantle is similar to2-3 times stronger than that of P. A two-dimensional cross section, constructed with the RWB method, suggests that the observed discontinuities can be characterized as intermittent lateral heterogeneities whose lateral extent is a few hundred kilometers. The migration shows weak evidence of scattering objects which belong to the seismic discontinuities detected by the RWB method. These anomalous structures may represent a part of hot plume generated beneath the southwestern Pacific in the lowermost mantle
On 26 December 2004, a moment magnitude M-w = 9.3 earthquake occurred along Northern Sumatra, the Nicobar and Andaman islands, resulting in a devastating tsunami in the Indian Ocean region(1). The rapid and accurate estimation of the rupture length and direction of such tsunami-generating earthquakes is crucial for constraining both tsunami wave- height models as well as the seismic moment of the events. Compressional seismic waves generated at the hypocentre of the Sumatra earthquake arrived after about 12 min at the broadband seismic stations of the German Regional Seismic Network (GRSN)(2,3), located approximately 9,000 km from the event. Here we present a modification of a standard array- seismological approach and show that it is possible to track the propagating rupture front of the Sumatra earthquake over a total rupture length of 1,150 km. We estimate the average rupture speed to be 2.3-2.7 km s(-1) and the total duration of rupture to be at least 430 s, and probably between 480 and 500 s.
We test the capability of broadband arrays at teleseismic distances to image the spatio-temporal characteristics of the seismic energy release during the Dec 26, 2004 Sumatra earthquake at early observation times. Using a non-plane-wave array location technique previously reported values for rupture length (about 1150 km), duration (about 480 s), and average rupture velocity (2.4-2.7 km/s) are confirmed. Three dominant energy releases are identified: one near the hypocenter, a second at 6 degrees N94 degrees E about 130 s later and a third one after 300 s at 9 degrees N92-93 degrees E. The spatio-temporal distribution of the radiated seismic energy in the source region is calculated from the stacked broadband recordings of two arrays in Germany and Japan and results in rough estimates of the total seismic energy of 0.55.10(18) Nm (GRSN) and 1.53.10(18) Nm (FNET) respectively. Changes in the relative ratio of energy as function of spatio-temporal location indicate a rotation of the focal mechanism during the rupture process
Fluid intelligence is the ability to think flexibly and to understand abstract relations. People with high fluid intelligence (hi-fluIQ) perform better in analogical reasoning tasks than people with average fluid intelligence (ave-fluIQ). Although previous neuroimaging studies reported involvement of parietal and frontal brain regions in geometric analogical reasoning (which is a prototypical task for fluid intelligence), however, neuroimaging findings on geometric analogical reasoning in hi-fluIQ are sparse. Furthermore, evidence on the relation between brain activation and intelligence while solving cognitive tasks is contradictory. The present study was designed to elucidate the cerebral correlates of geometric analogical reasoning in a sample of hi-fluIQ and ave-fluIQ high school students. We employed a geometric analogical reasoning task with graded levels of task difficulty and confirmed the involvement of the parieto-frontal network in solving this task. In addition to characterizing the brain regions involved in geometric analogical reasoning in hi-fluIQ and ave-fluIQ, we found that blood oxygenation level dependency (BOLD) signal changes were greater for hi-fluIQ than for ave-fluIQ in parietal brain regions. However, ave-fluIQ showed greater BOLD signal changes in the anterior cingulate cortex and medial frontal gyrus than hi-fluIQ. Thus, we showed that a similar network of brain regions is involved in geometric analogical reasoning in both groups. Interestingly, the relation between brain activation and intelligence is not mono-directional, but rather, it is specific for each brain region. The negative brain activation-intelligence relationship in frontal brain regions in hi-fluIQ goes along with a better behavioral performance and reflects a lower demand for executive monitoring compared to ave-fluIQ individuals. In conclusion, our data indicate that flexibly modulating the extent of regional cerebral activity is characteristic for fluid intelligence.
The northward movement and collision of the Arabian plate with Eurasia generates compressive stresses and resulting shortening in Iran. Within the Alborz Mountains, North Iran, a complex and not well understood system of strike-slip and thrust faults accomodates a fundamental part of the NNE-SSW oriented shortening. On 28th of May 2004 the Mw 6.3 Baladeh earthquake hit the north-central Alborz Mountains. It is one of the rare and large events in this region in modern time and thus a seldom chance to study earthquake mechanisms and the local ongoing deformation processes. It also demonstrated the high vulnerability of this densily populated region.
The M (w) 6.2 Baladeh earthquake occurred on 28 May 2004 in the Alborz Mountains, northern Iran. This earthquake was the first strong shock in this intracontinental orogen for which digital regional broadband data are available. The Baladeh event provides a rare opportunity to study fault geometry and ongoing deformation processes using modern seismological methods. A joint inversion for hypocentres and a velocity model plus a surface-wave group dispersion curve analysis were used to obtain an adapted velocity model, customised for mid- and long-period waveform modelling. Based on the new velocity model, regional waveform data of the mainshock and larger aftershocks (M (w) a parts per thousand yen3.3) were inverted for moment tensors. For the Baladeh mainshock, this included inversion for kinematic parameters. All analysed earthquakes show dominant thrust mechanisms at depths between 14 and 26 km, with NW-SE striking fault planes. The mainshock ruptured a 28A degrees south-dipping area of 24 x 21 km along a north-easterly direction. The rupture plane of the mainshock does not coincide with the aftershock distribution, neither in map view nor with respect to depth. The considered aftershocks form two main clusters. The eastern cluster is associated with the mainshock. The western cluster does not appear to be connected with the rupture plane of the mainshock but, instead, indicates a second activated fault plane dipping at 85A degrees towards the north.
The complex system of strike-slip and thrust faults in the Alborz Mountains, Northern Iran, are not well understood yet. Mainly structural and geomorphic data are available so far. As a more extensive base for seismotectonic studies and seismic hazard analysis we plan to do a comprehensive seismic moment tensor study also from smaller magnitudes (M < 4.5) by developing a new algorithm. Here, we present first preliminary results.
We develop an amplitude spectral ratio method for event couples from clustered earthquakes to estimate seismic wave attenuation (Q-1) in the source volume. The method allows to study attenuation within the source region of earthquake swarms or aftershocks at depth, independent of wave path and attenuation between source region and surface station. We exploit the high-frequency slope of phase spectra using multitaper spectral estimates. The method is tested using simulated full wave-field seismograms affected by recorded noise and finite source rupture. The synthetic tests verify the approach and show that solutions are independent of focal mechanisms but also show that seismic noise may broaden the scatter of results. We apply the event couple spectral ratio method to northwest Bohemia, Czech Republic, a region characterized by the persistent occurrence of earthquake swarms in a confined source region at mid-crustal depth. Our method indicates a strong anomaly of high attenuation in the source region of the swarm with an averaged attenuation factor of Qp < 100. The application to S phases fails due to scattered P-phase energy interfering with S phases. The Qp anomaly supports the common hypothesis of highly fractured and fluid saturated rocks in the source region of the swarms in northwest Bohemia. However, high temperatures in a small volume around the swarms cannot be excluded to explain our observations.
A mid-aperture broad-band test array (OBS array DOCTAR) was deployed from June 2011 to April 2012 about 100 km north of the Gloria fault in the Eastern North Atlantic in about 5000 m water depth. In addition arrays were installed on Madeira Island and in western Portugal mainland. For the first time in the Eastern North Atlantic, we recorded a large number of high frequency Po and So waves from local and regional small and moderate earthquakes (M-L < 4). An incoherent beamforming method was adapted to scan continuous data for such Po and So arrivals applying a sliding window waveform migration and frequency-wavenumber technique. We identify about 320 Po and 1550 So arrivals and compare the phase onsets with the ISC catalogue (ISC 2015) for the same time span. Up to a distance of 6 degrees to the DOCTAR stations all events listed in the ISC catalogue could be associated to Po and So phases. Arrivals from events in more than 10 degrees distance could be identified only in some cases. Only few Po and/or So arrivals were detected for earthquakes from the European and African continental area, the continental shelf regions and for earthquakes within or northwest of the Azores plateau. Unexpectedly, earthquake clusters are detected within the oceanic plates north and south of the Gloria fault and far from plate boundaries, indicating active intraplate structures. We also observe and locate numerous small magnitude earthquakes on the segment of the Gloria fault directly south of DOCTAR, which likely coincides with the rupture of the 25 November 1941 event. Local small magnitude earthquakes located beneath DOCTAR show hypocentres up to 30 km depth and strike-slip focal mechanisms. A comparison with detections at temporary mid-aperture arrays on Madeira and in western Portugal shows that the deep ocean array performs much better than the island and the continental array regarding the detection threshold for events in the oceanic plates.
We conclude that sparsely distributed mid-aperture seismic arrays in the deep ocean could decrease the detection and location threshold for seismicity with M-L < 4 in the oceanic plate and might constitute a valuable tool to monitor oceanic plate seismicity.
Earthquake source arrays
(2020)
A collection of earthquake sources recorded at a single station, under specific conditions, are considered as a source array (SA), that is interpreted as if earthquake sources originate at the station location and are recorded at the source location. Then, array processing methods, that is array beamforming, are applicable to analyse the recorded signals. A possible application is to use source array multiple event techniques to locate and characterize near-source scatterers and structural interfaces. In this work the aim is to facilitate the use of earthquake source arrays by presenting an automatic search algorithm to configure the source array elements. We developed a procedure to search for an optimal source array element distribution given an earthquake catalogue including accurate origin time and hypocentre locations. The objective function of the optimization process can be flexibly defined for each application to ensure the prerequisites (criteria) of making a source array. We formulated four quantitative criteria as subfunctions and used the weighted sum technique to combine them in one single scalar function. The criteria are: (1) to control the accuracy of the slowness vector estimation using the time domain beamforming method, (2) to measure the waveform coherency of the array elements, (3) to select events with lower location error and (4) to select traces with high energy of specific phases, that is, sp- or ps-phases. The proposed procedure is verified using synthetic data as well as real examples for the Vogtland region in Northwest Bohemia. We discussed the possible application of the optimized source arrays to identify the location of scatterers in the velocity model by presenting a synthetic test and an example using real waveforms.
Seismic scattering and absorption of oceanic lithospheric S waves in the Eastern North Atlantic
(2021)
The scattering and absorption of high-frequency seismic waves in the oceanic lithosphere is to date only poorly constrained by observations. Such estimates would not only improve our understanding of the propagation of seismic waves, but also unravel the small-scale nature of the lithosphere and its variability. Our study benefits from two exceptional situations: (1) we deployed over 10 months a mid-aperture seismological array in the central part of the Eastern North Atlantic in 5 km water depth and (2) we could observe in total 340 high-frequency (up to 30 Hz) Po and So arrivals with tens to hundreds of seconds long seismic coda from local and regional earthquakes in a wide range of backazimuths and epicentral distances up to 850 km with a travel path in the oceanic lithosphere. Moreover, the array was located about 100 km north of the Gloria fault, defining the plate boundary between the Eurasian and African plates at this location which also allows an investigation of the influence of an abrupt change in lithospheric age (20 Ma in this case) on seismic waves. The waves travel with velocities indicating upper-mantle material. We use So waves and their coda of pre-selected earthquakes to estimate frequency-dependent seismic scattering and intrinsic attenuation parameters. The estimated scattering attenuation coefficients are between 10(-4) and 4 x 10(-5) m(-1) and are typical for the lithosphere or the upper mantle. Furthermore, the total quality factors for So waves below 5 Hz are between 20 and 500 and are well below estimates from previous modelling for observations in the Pacific Ocean. This implies that the Atlantic Ocean is more attenuative for So waves compared to the Pacific Ocean, which is inline with the expected behaviour for the lithospheric structures resulting from the slower spreading rates in the Atlantic Ocean. The results for the analysed events indicate that for frequencies above 3 Hz, intrinsic attenuation is equal to or slightly stronger than scattering attenuation and that the So-wave coda is weakly influenced by the oceanic crust. Both observations are in agreement with the proposed propagation mechanism of scattering in the oceanic mantle lithosphere. Furthermore, we observe an age dependence which shows that an increase in lithospheric age is associated with a decrease in attenuation. However, we also observe a trade-off of this age-dependent effect with either a change in lithospheric thickness or thermal variations, for example due to small-scale upwellings in the upper mantle in the southeast close to Madeira and the Canaries. Moreover, the influence of the nearby Gloria fault is visible in a reduction of the intrinsic attenuation below 3 Hz for estimates across the fault. This is the first study to estimate seismic scattering and absorption parameters of So waves for an area with several hundreds of kilometres radius centred in the Eastern North Atlantic and using them to characterize the nature of the oceanic lithosphere.