Refine
Year of publication
- 2010 (95) (remove)
Document Type
- Article (71)
- Doctoral Thesis (24)
Is part of the Bibliography
- yes (95)
Keywords
- Assoziatives Anisotropiemodell (1)
- Biotin-Streptavidin (1)
- Chemometrie (1)
- Cyaninfarbstoffe (1)
- Elektrolumineszenz (1)
- Elektrospinnen (1)
- Faser (1)
- Fluoreszenz (1)
- Fluoreszenz-Korrelations-Spektroskopie (1)
- Fluoreszenzanisotropie (1)
Institute
- Institut für Chemie (95) (remove)
Rubidium and strontium partitioning experiments between haplogranitic melts and aqueous fluids (water or 1.16- 3.56 m (NaCl + KCl) +/- HCl) were conducted at 750-950 degrees C and 0.2-1.4 GPa to investigate the effects of melt and fluid composition, pressure, and temperature. In addition, we studied if the applied technique (rapid and slow quench, and in-situ determination of trace element concentration in the fluid) has a bearing on the obtained data. There is good agreement of the data from different techniques for chloridic solutions, whereas back reactions between fluid and Melt upon cooling have a significant effect on results from the experiments with water. The Rb fluid-melt partition coefficient shows no recognizable dependence on melt composition and temperature. For chloridic Solutions, it is similar to 0.4, independent of pressure. In experiments with water, it is one to two orders of magnitude lower and increases with pressure. The strontium fluid-melt partition coefficient does not depend on temperature. It increases slightly with pressure in Cl free experiments. In chloridic fluids, there is a sharp increase in the Sr partition coefficient with the alumina saturation index (ASI) from 0.003 at an ASI of 0.8 to a maximum of 0.3 at an ASI of 1.05. At higher ASI, it decreases slightly to 0.2 at an ASI of 1.6. It is one to two orders of magnitude higher in chloridic fluids compared to those found in H2O experiments. The Rb/Sr ratio in non-chloridic solutions in equilibrium with metaluminous melts increases with pressure, whereas the Rb/Sr ratio in chloridic fluids is independent of pressure and decreases with fluid salinity. The obtained fluid-melt partition coefficients are in good agreement with data from natural cogenetic fluid and melt inclusions. Numerical modeling shows that although the Rb/Sr ratio in the residual melt is particularly sensitive to the degree of fractional crystallization, exsolution of a fluid phase, and associated fluid-melt partitioning is not a significant factor controlling Rb and Sr concentrations in the residual melt during crystallization of most granitoids.
Recent calculations on the hydrogen-exchange reaction [Bouakline et al., J. Chem. Phys. 128, 124322 (2008)], have found strong geometric phase (GP) effects in the state-to-state differential cross-sections (DCS), at energies above the energetic minimum of the conical intersection (CI) seam, which cancel out in the integral cross-sections (ICS). In this article, we explain the origin of this cancellation and make other predictions about the nature of the reaction mechanisms at these high energies by carrying out quasiclassical trajectory (QCT) calculations. Detailed comparisons are made with the quantum results by splitting the quantum and the QCT cross-sections into contributions from reaction paths that wind in different senses around the CI and that scatter the products in the nearside and farside directions. Reaction paths that traverse one transition state (1-TS) scatter their products in just the nearside direction, whereas paths that traverse two transition states (2-TS) scatter in both the nearside and farside directions. However, the nearside 2-TS products scatter into a different region of angular phase-space than the 1-TS products, which explains why the GP effects cancel out in the ICS. Analysis of the QCT results also suggests that two separate reaction mechanisms may be responsible for the 2-TS scattering at high energies.
Terephthalic acid reacts with alkyl halides under Birch conditions to substituted 1,4-cyclohexadienes in high yields and good stereoselectivities. Electrophiles containing ester or nitrile groups undergo a surprising fragmentation under the reaction conditions. Subsequent treatment with chlorosulfonic acid proceeds by an interesting tandem decarbonylation/decarboxylation, affording 1,4-dialkylbenzenes in excellent regioselectivity. Thus our new method is superior to classical Friedel-Crafts alkylations.
Synthesis of stimuli-responsive and switchable inorganic nanoparticles for biomedical applications
(2010)
An abacavir-targeted fluorosensor based on the carbazole moiety has been synthesised and characterised. Recognition of abacavir is by base pairing between a uracil moiety present in the fluorosensor and the guanine moiety of abacavir. The fluorosensor exhibits five-fold quenching in the presence of 50M abacavir. Its sensitivity to abacavir is superior to that of other reverse transcriptase inhibitors: zidovudine, lamivudine and didanosine. Due to its high sensitivity, this fluorosensor has the potential to be used in multi-analyte array-based detection platforms as well as in microfluidics systems.
Through-space NMR shieldings were calculated for trinuclear metal-carbonyl compounds [M-3(CO)(12)] (M = Fe, Ru, Os), employing the nucleus-independent chemical shift approach. The through-space shieldings were visualized as a contour plot of iso-chemical shielding surfaces, and were applied to quantify the overall anisotropic effect of the carbonyl groups, as well as to identify the influence of the transition metal on the scopes of the corresponding anisotropy cones. The shielding surfaces show that the anisotropic effect of the carbonyl groups at equatorial positions changes depending on the metal. This effect was associated with pi-backdonation from the metal to the carbonyl groups in that position, in agreement with geometric data as well as calculated NMR parameters. Therefore, visualization of the through-space NMR shieldings of trinuclear metal-carbonyl compounds of group 8 is able to reflect the distinct arrangements of the carbonyl groups in these organometallic compounds.
An alpha,omega-diene containing hydroxyl groups was prepared from plant oil-derived platform chemicals. The acyclic diene metathesis copolymerization (ADMET) of this monomer with a phosphorus-containing alpha,omega-cliene (DOPO II), also plant oil derived, afforded a series of phosphorus containing linear polyesters, which have been fully characterized. The backbone hydroxyls of these polyesters have been acrylated and radically polymerized to produce crosslinked polymers. The thermomechanical and mechanical properties, the thermal stability, and the flame retardancy of these phosphorus-based thermosets have been studied. Moreover, methyl 10-undecenoate has been used as chain stopper in selected ADMET polymerizations to study the effect of the prepolymers' molecular weights on the different properties of the final materials.
Narrow channels with polar walls are the structural and functional features responsible for the high capacity of a zinc-organic framework based on an imidazolate-amide-imidate ligand for the uptake of H2 and CO2 (see structure: orange Zn, blue N, red O, dark gray C, light gray H). The rigid and stable chelating ligand was synthesized in situ by partial hydrolysis of a dicyanoimidazole compound.
The kinetics of the crystallization of thermoresponsive poly(2-isopropyl-2-oxazoline) in water and the time- dependent evolution of the morphology were examined using wide-angle X-ray scattering and conventional and cryogenic scanning electron microscopy. Results indicate that a temperature-induced phase separation produces a bicontinuous polymer network-like structure, which with the onset of crystallization collapses into individual particles (1-2 mu m in diameter) composed of a porous fiber mesh. Nanofibers then preferentially form at the particle surface, thus wrapping the microspheres like a ball of wool. The particle morphology is severely affected by changes in temperature and less by the initial polymer concentration.
New amphiphilic block copolymers consisting of N-vinyl pyrrolidone and vinyl acetate were synthesized via controlled radical polymerization using a reversible addition/fragmentation chain transfer (RAFT)/macromolecular design via the interchange of xanthates (MADIX) system. The synthesis was carried out in 1,4-dioxane as process solvent. In order to get conclusions on the mechanism of the polymerization the molecular structure of formed copolymers was analysed by means of different analytical techniques. C-13 NMR spectroscopy was used for the determination of the monomer ratios. End groups were analysed by means of matrix-assisted laser desorption/ionization time-of-flight mass spectrometry. This technique was also used to determine possible fragmentations of the RAFT end groups. By means of a combination of size exclusion chromatography, C-13 NMR and static light scattering molar mass distributions and absolute molar masses could be analysed. The results clearly show a non-ideal RAFT mechanism.
PVP-block-PVAc block copolymers were synthesized by controlled radical polymerization applying a RAFT/MADIX system and were investigated by HPLC and by coupling of chromatography to FT-IR spectroscopy and MALDI-TOF MS. Chromatographic methods (LACCC and gradient techniques) were developed that allowed a separation of block copolymers according to their repeating units. The results of the spectroscopic and spectrometric analysis clearly showed transfer between radicals and process solvent. With the use of hyphenated techniques differences between main and side products were detected. In agreement with previously published results, obtained by NMR, SEC, static light scattering and MALDI- TOF MS, our data proved a non-ideal RAFT polymerization.
Aqueous solutions of sodium dodecylsulfate (SDS) and poly(N,N'-diallyl-N,N'-dimethyl-alt-maleamic carboxylate) (PalH), a synthetic pH-tuneable polyelectrolyte (PEL), have been investigated by various techniques at different pH-values in absence and presence of NaCl. Potentiometric measurements using a surfactant-selective electrode indicate a quite complex interaction mechanism, which can be subdivided into different regions, where non-cooperative, electrostatic and cooperative hydrophobic interactions are of relevance. It was concluded, that in dependence on pH, conformational changes are responsible for the different interaction behavior in the NaCl-free system. Isothermal titration calorimetry (ITC) suggests that early stage hydrophobic binding is an exothermic process followed by electrostatic interactions, which are endothermic in nature and entropy driven. After NaCl addition the interaction mechanism becomes independent of pH due to a screening of (i) attractive interactions between the surfactant head groups and oppositely charged binding sites and (ii) repulsive forces between the surfactant head groups. Furthermore, the ITC investigations have revealed that after salt-addition surfactant micelles interact with the polymer instead of separated SDS molecules due to a depression of the CMC.
Lectin-bound conformations and non-covalent interactions of glycomimetic analogs of thiochitobiose
(2010)
The bound conformations of five S-glycoside analogs of N,N'-diacetylchitobiose as well as their non- covalent interactions with two lectins, Phytolacca americana lectin (PAL) and wheat germ agglutinin (WGA), are reported. The conformations of the ligands were examined by trNOESY experiments and compared with the free, solution-state conformations and molecular modeling data obtained by force field calculations. In the case of S-aryl, S-glycosides with exclusively S-glycosidic linkages, similar free and lectin-bound conformations and non-covalent interactions were found, whereas they differed for mixed glycosides and for a thiazoline derivative. In addition, STD (saturation transfer difference) NMR magnetization transfer efficiencies at three different temperatures were determined and assessed with respect to the structural differences of these pseudosaccharides. The binding epitopes of each substrate with PAL and WGA were also determined.
Olefin isomerization side reactions that occur during ADMET polymerizations were studied by preparing polyesters via ADMET and subsequently degrading these polyesters via transesterification with methanol. The resulting diesters, representing the repeating units of the previously prepared polyesters, were then analyzed by GC-MS. This strategy allowed quantification of the amount of olefin isomerization that took place during ADMET polymerization with second generation ruthenium metathesis catalysts. In a second step, it was shown that the addition of benzoquinone to the polymerization mixture prevented the olefin isomerization. Therefore, second generation ruthenium metathesis catalysts may now be used for the preparation of well-defined polymers via ADMET with very little isomerization, which was not possible before.
Herein we demonstrate how the photoreaction between anthracenes and singlet oxygen (O-1(2)) is employed for applications either as photoswitch or as photoresist. Thin Films of the diaryl-alkyl anthracene 1 and the analogous oligomeric species 2 were it-radiated under photomasks to generate pattern structures composed of 1/1-O-2 and 2/2-O-2. Kelvin probe force microscopy (KPFM) provided a powerful and nondestructive method to image the pattern information. The following studies based on AFM, KPFM and contact angle measurements unfold that the two species 1 and 2 underwent different progressions after the imaging step. Degrading is observed for the monomeric compound 1 and the pattern eventually becomes recognizable in topography. In the oxidized state (1-O-2) the monomeric species remains physically stable. In consequence, the unreacted portion is removable and the remaining oxygenated form 1-O-2 is sufficiently stable to protect in underlying substrate (e.g., silver) from etching. Thus, the system 1/1-O-2 operates as photoresist. Oil the other hand, both states of the oligomier 2 remain stable. The Film is stable up to temperatures > 120 degrees C required to erase the pattern within acceptable time by cycloreversion. Anthracene 2 therefore acts as erasable and rewritable photochromic switch. The different behavior between 1 and 2 is explained by phase transitions which cause crystallization and finally ablation. Such transitions affect only the monomeric system 1/1-O-2 and not the oligomeric system 2/2-O-2. In conclusion, we designed two very similar materials based on diarylanthracenes, which can act either as a photoresist or as a rewritable photochrornic switch.
Stochastic approach to laser-induced ultrafast dynamics : the desorption of H-2/D-2 from Ru(0001)
(2010)
The desorption of molecular hydrogen and deuterium induced by femtosecond-laser pulses is studied theoretically for the so-called DIMET (Desorption Induced by Multiple Electronic Transitions) process. These investigations are based on nonadiabatic classical Monte Carlo trajectory (CMCT) simulations on a ground and an excited state potential energy surface, including up to all six adsorbate degrees of freedom. The focus is on the hot-electron mediated energy transfer from the surface to the molecule and back, and the energy partitioning between the different degrees of freedom of the desorbing molecules. We first validate for a two-mode model comprising the desorption mode and the internal vibrational coordinate, the classical Monte Carlo trajectory method by comparing with Monte Carlo wavepacket (MCWP) calculations arising from a fully quantum mechanical open-system density matrix treatment. We then proceed by extending the CMCT calculations to include all six nuclear degrees of freedom of the desorbing molecule. This allows for a detailed comparison between theory and experiment concerning isotope effects, energy partitioning (translational, vibrational, and rotational energies and their distributions), and the dependence of these properties on the laser fluence. The most important findings are as follows. (i) CMCT agrees qualitative with the MCWP scheme. (ii) The basic experimental features such as the large isotope effect, the non-linear increase of yield with laser fluence, translationally hot products (in the order of several 1000 K) and non-equipartitioning of translational and internal energies (E-trans > E- vib > E-rot) are well reproduced. (iii) Predictions concerning a strong angular dependence of translational energies at large observation angles are also made.
Nanofibrous mats are interesting scaffold materials for biomedical applications like tissue engineering due to their interconnectivity and their size dimension which mimics the native cell environment. Electrospinning provides a simple route to access such fiber meshes. This thesis addresses the structural and functional control of electrospun fiber mats. In the first section, it is shown that fiber meshes with bimodal size distribution could be obtained in a single-step process by electrospinning. A standard single syringe set-up was used to spin concentrated poly(ε-caprolactone) (PCL) and poly(lactic-co-glycolic acid) (PLGA) solutions in chloroform and meshes with bimodal-sized fiber distribution could be directly obtained by reducing the spinning rate at elevated humidity. Scanning electron microscopy (SEM) and mercury porosity of the meshes suggested a suitable pore size distribution for effective cell infiltration. The bimodal fiber meshes together with unimodal fiber meshes were evaluated for cellular infiltration. While the micrometer fibers in the mixed meshes generate an open pore structure, the submicrometer fibers support cell adhesion and facilitate cell bridging on the large pores. This was revealed by initial cell penetration studies, showing superior ingrowth of epithelial cells into the bimodal meshes compared to a mesh composed of unimodal 1.5 μm fibers. The bimodal fiber meshes together with electrospun nano- and microfiber meshes were further used for the inorganic/organic hybrid fabrication of PCL with calcium carbonate or calcium phosphate, two biorelevant minerals. Such composite structures are attractive for the potential improvement of properties such as stiffness or bioactivity. It was possible to encapsulate nano and mixed sized plasma-treated PCL meshes to areas > 1 mm2 with calcium carbonate using three different mineralization methods including the use of poly(acrylic acid). The additive seemed to be useful in stabilizing amorphous calcium carbonate to effectively fill the space between the electrospun fibers resulting in composite structures. Micro-, nano- and mixed sized fiber meshes were successfully coated within hours by fiber directed crystallization of calcium phosphate using a ten-times concentrated simulated body fluid. It was shown that nanofibers accelerated the calcium phosphate crystallization, as compared to microfibers. In addition, crystallizations performed at static conditions led to hydroxyapatite formations whereas in dynamic conditions brushite coexisted. In the second section, nanofiber functionalization strategies are investigated. First, a one-step process was introduced where a peptide-polymer-conjugate (PLLA-b-CGGRGDS) was co-spun with PLGA in such a way that the peptide is enriched on the surface. It was shown that by adding methanol to the chloroform/blend solution, a dramatic increase of the peptide concentration at the fiber surface could be achieved as determined by X-ray photoelectron spectroscopy (XPS). Peptide accessibility was demonstrated via a contact angle comparison of pure PLGA and RGD-functionalized fiber meshes. In addition, the electrostatic attraction between a RGD-functionalized fiber and a silica bead at pH ~ 4 confirmed the accessibility of the peptide. The bioactivity of these RGD-functionalized fiber meshes was demonstrated using blends containing 18 wt% bioconjugate. These meshes promoted adhesion behavior of fibroblast compared to pure PLGA meshes. In a second functionalization approach, a modular strategy was investigated. In a single step, reactive fiber meshes were fabricated and then functionalized with bioactive molecules. While the electrospinning of the pure reactive polymer poly(pentafluorophenyl methacrylate) (PPFPMA) was feasible, the inherent brittleness of PPFPMA required to spin a PCL blend. Blends and pure PPFPMA showed a two-step functionalization kinetics. An initial fast reaction of the pentafluorophenyl esters with aminoethanol as a model substance was followed by a slow conversion upon further hydrophilization. This was analysed by UV/Vis-spectroscopy of the pentaflurorophenol release upon nucleophilic substitution with the amines. The conversion was confirmed by increased hydrophilicity of the resulting meshes. The PCL/PPFPMA fiber meshes were then used for functionalization with more complex molecules such as saccharides. Aminofunctionalized D-Mannose or D-Galactose was reacted with the active pentafluorophenyl esters as followed by UV/Vis spectroscopy and XPS. The functionality was shown to be bioactive using macrophage cell culture. The meshes functionalized with D-Mannose specifically stimulated the cytokine production of macrophages when lipopolysaccharides were added. This was in contrast to D-Galactose- or aminoethanol-functionalized and unfunctionalized PCL/PPFPMA fiber mats.