Refine
Year of publication
Language
- English (47)
Is part of the Bibliography
- yes (47)
Keywords
- ultrafast X-ray diffraction (2)
- Detector modelling and simulations II (electric fields, charge transport, multiplication and induction, pulse formation, electron emission, etc) (1)
- Energy-dispersive Laue diffraction (1)
- Interaction of radiation with matter (1)
- Solid state detectors (1)
- X-ray diffraction (1)
- X-ray imaging (1)
- X-ray spectroscopy (1)
- X-ray switching (1)
- acoustic waves (1)
Institute
The third-generation X-ray source BESSYII (Berlin, Germany) provides coherent X-ray radiation which can be used for static and dynamic speckle analysis. Recently we have demonstrated that one can perform experiments with coherent white radiation provided by a bending magnet (5 < E < 20 keV). In this paper we show that the diffraction figure of the initial pinhole must be considered for the interpretation of coherent experiments. The reflectivity spectrum of a sample results from the Fresnel diffraction of the incident pinhole deformed by the static speckle features of the sample surface. For dynamical experiments all speckle like features alter with time whereas the pure Fresnel fringes remain constant. (c) 2007 Published by Elsevier B.V.
The first application of a pnCCD detector for X-ray scattering experiments using white synchrotron radiation at BESSY II is presented. A Cd arachidate multilayer was investigated in reflection geometry within the energy range 7 keV < E < 35 keV. At fixed angle of incidence the two-dimensional diffraction pattern containing several multilayer Bragg peaks and respective diffuse-resonant Bragg sheets were observed. Since every pixel of the detector is able to determine the energy of every incoming photon with a resolution Delta E/E similar or equal to 10(-2). a three-dimensional dataset is finally obtained. In order to achieve this energy resolution the detector was operated in the so-called single-photon- counting mode. A full dataset was evaluated taking into account all photons recorded within 10(5) detector frames at a readout rate of 200 Hz. By representing the data in reciprocal-space coordinates, it becomes obvious that this experiment with the pnCCD detector provides the same information as that obtained by combining a large number of monochromatic scattering experiments using conventional area detectors.
We experimentally demonstrate efficient switching of the hard x-ray Bragg reflectivity of a SrRuO3 /SrTiO3 superlattice by optical excitation of large-amplitude coherent acoustic superlattice phonons. The rocking curve changes drastically on a 1 ps timescale. The (0 0 116) reflection is almost extinguished (Delta R/R-0=-0.91), while the (0 0 118) reflection increases by more than an order of magnitude (Delta R/R-0=24.1). The change of the x-ray structure factor depends nonlinearly on the phonon amplitude, allowing manipulation of the x-ray response on a timescale considerably shorter than the phonon period. Numerical simulations for a superlattice with slightly changed geometry and realistic parameters predict a switching-contrast ratio Delta R/R-0 of 700 with high reflectivity.
In situ high temperature x-ray reflectivity and grazing incidence x-ray diffraction measurements in the energy dispersive mode are used to study the ordered face-centered tetragonal (fct) L1(0) phase formation in [Fe(19 angstrom)/ Pt(25 angstrom)](x10) multilayers prepared by ion beam sputtering. With the in situ x-ray measurements it is observed that (i) the multilayer structure first transforms to a disordered FePt and subsequently to an ordered fct L1(0) phase, (ii) the ordered fct L1(0) FePt peaks start to appear at 320°C annealing, (iii) the activation energy of the interdiffusion is 0.8 eV and (iv) ordered fct FePt grains have preferential out-of-plane texture. The magneto-optical Kerr effect and conversion electron Mossbauer spectroscopies are used to study the magnetic properties of the as- deposited and 400°C annealed multilayers. The magnetic data for the 400°C annealed sample indicate that the magnetization is at an angle of ~50° from the plane of the film.
Temperature dependent energy-dispersive X-ray diffraction and magnetic study of Fe/Al interface
(2007)
In situ temperature dependent energy-dispersive structural and magnetic study of electron beam evaporated Fe/Al multilayer sample (MLS) has been investigated. The structural studies show the formation of an intermixed FeAl transition layer of a few nanometers thick at the interface during deposition, which on annealing at 300 degrees C transforms to B2FeAl intermetallic phase. Magnetization decreases with increase in temperature and drops to minimum above 300 degrees C due to increase in anti-ferromagnetic interlayer coupling and formation of nonmagnetic FeAl phase at the interface. The Curie temperature (T-c) is found to be 288 degrees C and is much less than that of bulk bcc Fe.
This paper discusses the experimental realisation of two types of X-ray interferometer based on pinhole diffraction. In both interferometers the beam splitter was a thin metal foil containing micrometer pinholes to divide the incident X-ray wave into two coherent waves. The interference pattern was studied using an energy-dispersive detector to simultaneously investigate in a large spectral range the diffraction properties of the white synchrotron radiation. For a highly absorbing pinhole mask the interference fringes from the classical Young's double-pinhole experiment were recorded and the degree of coherence of X-rays could be determined. In the case of low absorption of the metal foil at higher X-ray energies (> 15 keV) the interference pattern of a point diffraction interferometer was observed using the same set-up. The spectral refraction index of the metal foil was determined
Experiments at the bending magnet beamline at BESSY II (EDR beamline) profit from the excellent coherence properties of third generation synchrotron sources. Considering the exponentially decaying incident spectrum, and because no optical elements are installed except slits and vacuum windows, coherence experiments can be performed between 5 keV < E < 15 keV. First, the energy dependence of spatial coherence properties were determined measuring diffraction at single and double pinholes. Next, the coherent white radiation was used to probe the morphology of thin films in reflection geometry. The recorded intensity maps (reflectivity versus sample position) provide speckle patterns which reveal the locally varying sample morphology. Setting the incident angle, alpha(i), smaller or larger than the critical angle of total external reflection, alpha(c), one should be able to separate the surface height profile from the subsurface density modulation of a sample. The validity of this approach is verified at the example of reciprocal space maps taken from a polymer surface where we could reconstruct the lateral height profile from speckle data. (C) 2004 Elsevier B.V. All rights reserved