Refine
Has Fulltext
- no (240) (remove)
Year of publication
- 2019 (240) (remove)
Document Type
- Article (216)
- Other (9)
- Review (7)
- Doctoral Thesis (6)
- Habilitation Thesis (2)
Is part of the Bibliography
- yes (240)
Keywords
- climate (4)
- Holocene (3)
- paleoclimate (3)
- remote sensing (3)
- AMOC (2)
- Asia (2)
- Central Andes (2)
- Climate (2)
- Climate change (2)
- Climate change adaptation (2)
Institute
- Institut für Geowissenschaften (240) (remove)
The Alpine orogen formed as a result of the collision between the Adriatic and European plates. Significant crustal heterogeneity exists within the region due to the long history of interplay between these plates, other continental and oceanic blocks in the region, and inherited crustal features from earlier orogenies. Deformation relating to the collision continues to the present day. Here, a seismically constrained, 3-D structural and density model of the lithosphere of the Alps and their respective forelands, derived from integrating numerous geoscientific datasets, was adjusted to match the observed gravity field. It is shown that the distribution of seismicity and deformation within the region correlates well to thickness and density changes within the crust, and that the present-day Adriatic crust is both thinner and denser (22.5 km, 2800 kg m(-3) ) than the European crust (27.5 km, 2750 kg m(-3)). Alpine crust derived from each respective plate is found to show the same trend, with zones of Adriatic provenance (Austro-Alpine unit and Southern Alps) found to be denser and those of European provenance (Helvetic zone and Tauern Window) to be less dense. This suggests that the respective plates and related terranes had similar crustal properties to the present-day ones prior to orogenesis. The model generated here is available for open-access use to further discussions about the crust in the region.
Climate change is affecting the rate of carbon cycling, particularly in the Arctic. Permafrost degradation through deeper thaw and physical disturbances results in the release of carbon dioxide and methane to the atmosphere and to an increase in lateral dissolved organic matter (DOM) fluxes. Whereas riverine DOM fluxes of the large Arctic rivers are well assessed, knowledge is limited with regard to small catchments that cover more than 40% of the Arctic drainage basin. Here, we use absorption measurements to characterize changes in DOM quantity and quality in a low Arctic (Herschel Island, Yukon, Canada) and a high Arctic (Cape Bounty, Melville Island, Nunavut, Canada) setting with regard to geographical differences, impacts of permafrost degradation, and rainfall events. We find that DOM quantity and quality is controlled by differences in vegetation cover and soil organic carbon content (SOCC). The low Arctic site has higher SOCC and greater abundance of plant material resulting in higher chromophoric dissolved organic matter (cDOM) and dissolved organic carbon (DOC) than in the high Arctic. DOC concentration and cDOM in surface waters at both sites show strong linear relationships similar to the one for the great Arctic rivers. We used the optical characteristics of DOM such as cDOM absorption, specific ultraviolet absorbance (SUVA), ultraviolet (UV) spectral slopes (S275-295), and slope ratio (SR) for assessing quality changes downstream, at base flow and storm flow conditions, and in relation to permafrost disturbance. DOM in streams at both sites demonstrated optical signatures indicative of photodegradation downstream processes, even over short distances of 2000 m. Flow pathways and the connected hydrological residence time control DOM quality. Deeper flow pathways allow the export of permafrost-derived DOM (i.e. from deeper in the active layer), whereas shallow pathways with shorter residence times lead to the export of fresh surface- and near-surface-derived DOM. Compared to the large Arctic rivers, DOM quality exported from the small catchments studied here is much fresher and therefore prone to degradation. Assessing optical properties of DOM and linking them to catchment properties will be a useful tool for understanding changing DOM fluxes and quality at a pan-Arctic scale.
The processes that control long term landscape evolution in continental interiors and, in particular, along passive margins such as in southern Africa, are still the subject of much debate (e.g. Braun, 2018). Although today the Namibian margin is characterized by an arid climate, it has experienced climatic fluctuations during the Cenozoic and, yet, to date no study has documented the potential role of climate on its erosion history. In western Namibia, the Brandberg Massif, an erosional remnant or inselberg, provides a good opportunity to document the Cenozoic denudation history of the margin using the relationship between rock cooling or exhumation ages and their elevation. Here we provide new apatite (UThSm)/He dates on the Brandberg Inselberg that range from 151 +/- 12 to 30 +/- 2 Ma. Combined with existing apatite fission track data, they yield new constraints on the denudation history of the margin. These data document two main cooling phases since continental break-up 130 Myr ago, a rapid one (similar to 10 degrees C/Myr) following break-up and a slower one (similar to 12 degrees C/Myr) between 65 and 35 Ma. We interpret them respectively to be related to escarpment erosion following rifting and continental break-up and as a phase of enhanced denudation during the Early Eocene Climatic Optimum. We propose that during the Early Eocene Climatic Optimum chemical weathering was important and contributed significantly to the denudation of the Namibian margin and the formation of a pediplain around the Brandberg and enhanced valley incision within the massif. Additionally, aridification of the region since 35 Ma has resulted in negligible denudation rates since that time. (C) 2019 Elsevier B.V. All rights reserved.
The in-phase response collected by portable loop-loop electromagnetic induction (EMI) sensors operating at low and moderate induction numbers (<= 1) is typically used for sensing the magnetic permeability (or susceptibility) of the subsurface. This is due to the fact that the in-phase response contains a small induction fraction and a preponderant induced magnetization fraction. The magnetization fraction follows the magneto-static equations similarly to the magnetic method but with an active magnetic source. The use of an active source offers the possibility to collect data with several loop-loop configurations, which illuminate the subsurface with different sensitivity patterns. Such multiconfiguration soundings thereby allows the imaging of subsurface magnetic permeability/susceptibility variations through an inversion procedure. This method is not affected by the remnant magnetization and theoretically overcomes the classical depth ambiguity generally encountered with passive geomagnetic data. To invert multiconfiguration in-phase data sets, we propose a novel methodology based on a full-grid 3-D multichannel deconvolution (MCD) procedure. This method allows us to invert large data sets (e.g. consisting of more than a hundred thousand of data points) for a dense voxel-based 3-D model of magnetic susceptibility subject to smoothness constraints. In this study, we first present and discuss synthetic examples of our imaging procedure, which aim at simulating realistic conditions. Finally, we demonstrate the applicability of our method to field data collected across an archaeological site in Auvergne (France) to image the foundations of a Gallo-Roman villa built with basalt rock material. Our synthetic and field data examples demonstrate the potential of the proposed inversion procedure offering new and complementary ways to interpret data sets collected with modern EMI instruments.
Anthropogenic pressures increasingly alter natural systems. Therefore, understanding the resilience of agent-based complex systems such as ecosystems, i.e. their ability to absorb these pressures and sustain their functioning and services, is a major challenge. However, the mechanisms underlying resilience are still poorly understood. A main reason for this is the multidimensionality of both resilience, embracing the three fundamental stability properties recovery, resistance and persistence, and of the specific situations for which stability properties can be assessed. Agent-based models (ABM) complement empirical research which is, for logistic reasons, limited in coping with these multiple dimensions. Besides their ability to integrate multidimensionality through extensive manipulation in a fully controlled system, ABMs can capture the emergence of system resilience from individual interactions and feedbacks across different levels of organization. To assess the extent to which this potential of ABMs has already been exploited, we reviewed the state of the art in exploring resilience and its multidimensionality in ecological and socio-ecological systems with ABMs. We found that the potential of ABMs is not utilized in most models, as they typically focus on a single dimension of resilience by using variability as a proxy for persistence, and are limited to one reference state, disturbance type and scale. Moreover, only few studies explicitly test the ability of different mechanisms to support resilience. To overcome these limitations, we recommend to simultaneously assess multiple stability properties for different situations and under consideration of the mechanisms that are hypothesised to render a system resilient. This will help us to better exploit the potential of ABMs to understand and quantify resilience mechanisms, and hence support solving real-world problems related to the resilience of agent-based complex systems.
In the Next Generation Attenuation West2 (NGA-West2) project, a 3D subsurface structure model (Japan Seismic Hazard Information Station [J-SHIS]) was queried to establish depths to 1.0 and 2.5 km/s velocity isosurfaces for sites without depth measurement in Japan. In this article, we evaluate the depth parameters in the J-SHIS velocity model by comparing them with their corresponding site-specific depth measurements derived from selected KiK-net velocity profiles. The comparison indicates that the J-SHIS model underestimates site depths at shallow sites and overestimates depths at deep sites. Similar issues were also identified in the southern California basin model. Our results also show that these underestimations and over-estimations have a potentially significant impact on ground-motion prediction using NGA-West2 ground-motion models (GMMs). Site resonant period may be considered as an alternative to depth parameter in the site term of a GMM.
Deformation associated with plate convergence at subduction zones is accommodated by a complex system involving fault slip and viscoelastic flow. These processes have proven difficult to disentangle. The 2010 M-w 8.8 Maule earthquake occurred close to the Chilean coast within a dense network of continuously recording Global Positioning System stations, which provide a comprehensive history of surface strain. We use these data to assemble a detailed picture of a structurally controlled megathrust fault frictional patchwork and the three-dimensional rheological and time-dependent viscosity structure of the lower crust and upper mantle, all of which control the relative importance of afterslip and viscoelastic relaxation during postseismic deformation. These results enhance our understanding of subduction dynamics including the interplay of localized and distributed deformation during the subduction zone earthquake cycle.
Britholite group minerals (REE,Ca)(5)[(Si,P)O-4](3)(OH,F) are widespread rare-earth minerals in alkaline rocks and their associated metasomatic zones, where they usually are minor accessory phases. An exception is the REE deposit Rodeo de los Molles, Central Argentina, where fluorbritholite-(Ce) (FBri) is the main carrier of REE and is closely intergrown with fluorapatite (FAp). These minerals reach an abundance of locally up to 75 modal% (FBri) and 20 modal% (FAp) in the vein mineralizations. The Rodeo de los Molles deposit is hosted by a fenitized monzogranite of the Middle Devonian Las Chacras-Potrerillos batholith. The REE mineralization consists of fluorbritholite-(Ce), britholite-(Ce), fluorapatite, allanite-(Ce), and REE fluorcarbonates, and is associated with hydrothermal fluorite, quartz, albite, zircon, and titanite. The REE assemblage takes two forms: irregular patchy shaped REE-rich composites and discrete cross-cutting veins. The irregular composites are more common, but here fluorbritholite-(Ce) is mostly replaced by REE carbonates. The vein mineralization has more abundant and better-preserved britholite phases. The majority of britholite grains at Rodeo de los Molles are hydrothermally altered, and alteration is strongly enhanced by metamictization, which is indicated by darkening of the mineral, loss of birefringence, porosity, and volume changes leading to polygonal cracks in and around altered grains. A detailed electron microprobe study of apatite-britholite minerals from Rodeo de los Molles revealed compositional variations in fluorapatite and fluorbritholite-(Ce) consistent with the coupled substitution of REE3+ + Si4+ = Ca2+ + P5+ and a compositional gap of similar to 4 apfu between the two phases, which we interpret as a miscibility gap. Micrometer-scale intergrowths of fluorapatite in fluorbritholite-(Ce) minerals and vice versa are chemically characterized here for the first time and interpreted as exsolution textures that formed during cooling below the proposed solvus.
Nature-based solutions (NBS) have recently received attention due to their potential ability to sustainably reduce hydro-meteorological risks, providing co-benefits for both ecosystems and affected people. Therefore, pioneering research has dedicated efforts to optimize the design of NBS, to evaluate their wider co-benefits and to understand promoting and/or hampering governance conditions for the uptake of NBS. In this article, we aim to complement this research by conducting a comprehensive literature review of factors shaping people’s perceptions of NBS as a means to reduce hydro-meteorological risks. Based on 102 studies, we identified six topics shaping the current discussion in this field of research: (1) valuation of the co-benefits (including those related to ecosystems and society); (2) evaluation of risk reduction efficacy; (3) stakeholder participation; (4) socio-economic and location-specific conditions; (5) environmental attitude, and (6) uncertainty. Our analysis reveals that concerned empirical insights are diverse and even contradictory, they vary in the depth of the insights generated and are often not comparable for a lack of a sound theoretical-methodological grounding. We, therefore, propose a conceptual model outlining avenues for future research by indicating potential inter-linkages between constructs underlying perceptions of NBS to hydro-meteorological risks.
The Arctic is directly impacted by climate change. The increase in air temperature drives the thawing of permafrost and an increase in coastal erosion and river discharge. This leads to a greater input of sediment and organic matter into coastal waters, which substantially impacts the ecosystems, the subsistence economy of the local population, and the climate because of the transformation of organic matter into greenhouse gases. Yet, the patterns of sediment dispersal in the nearshore zone are not well known, because ships do not often reach shallow waters and satellite remote sensing is traditionally focused on less dynamic environments. The goal of this study is to use the extensive Landsat archive to investigate sediment dispersal patterns specifically on an exemplary Arctic nearshore environment, where field measurements are often scarce. Multiple Landsat scenes were combined to calculate means of sediment dispersal and sea surface temperature under changing seasonal wind conditions in the nearshore zone of Herschel Island Qikiqtaruk in the western Canadian Arctic since 1982. We use observations in the Landsat red and thermal wavebands, as well as a recently published water turbidity algorithm to relate archive wind data to turbidity and sea surface temperature. We map the spatial patterns of turbidity and water temperature at high spatial resolution in order to resolve transport pathways of water and sediment at the water surface. Our results show that these pathways are clearly related to the prevailing wind conditions, being ESE and NW. During easterly wind conditions, both turbidity and water temperature are significantly higher in the nearshore area. The extent of the Mackenzie River plume and coastal erosion are the main explanatory variables for sediment dispersal and sea surface temperature distributions in the study area. During northwesterly wind conditions, the influence of the Mackenzie River plume is negligible. Our results highlight the potential of high spatial resolution Landsat imagery to detect small-scale hydrodynamic processes, but also show the need to specifically tune optical models for Arctic nearshore environments.
The Central Asian Pamir Mountains (Pamirs) are a high-altitude region sensitive to climatic change, with only few paleoclimatic records available. To examine the glacial-interglacial hydrological changes in the region, we analyzed the geochemical parameters of a 31-kyr record from Lake Karakul and performed a set of experiments with climate models to interpret the results. delta D values of terrestrial biomarkers showed insolation-driven trends reflecting major shifts of water vapor sources. For aquatic biomarkers, positive delta D shifts driven by changes in precipitation seasonality were observed at ca. 31-30, 28-26, and 17-14 kyr BP. Multiproxy paleoecological data and modelling results suggest that increased water availability, induced by decreased summer evaporation, triggered higher lake levels during those episodes, possibly synchronous to northern hemispheric rapid climate events. We conclude that seasonal changes in precipitation-evaporation balance significantly influenced the hydrological state of a large waterbody such as Lake Karakul, while annual precipitation amount and inflows remained fairly constant.
Germany and the United Kingdom have domestic shale gas reserves which they may exploit in the future to complement their national energy strategies. However gas production releases volatile organic compounds (VOC) and nitrogen oxides (NOx), which through photochemical reaction form ground-level ozone, an air pollutant that can trigger adverse health effects e.g. on the respiratory system. This study explores the range of impacts of a potential shale gas industry in these two countries on local and regional ambient ozone. To this end, comprehensive emission scenarios are used as the basis for input to an online-coupled regional chemistry transport model (WRF-Chem). Here we simulate shale gas scenarios over summer (June, July, August) 2011, exploring the effects of varying VOC emissions, gas speciation, and concentration of NOx emissions over space and time, on ozone formation. An evaluation of the model setup is performed, which exhibited the model’s ability to predict surface meteorological and chemical variables well compared with observations, and consistent with other studies. When different shale gas scenarios were employed, the results show a peak increase in maximum daily 8-hour average ozone from 3.7 to 28.3 μg m–3. In addition, we find that shale gas emissions can force ozone exceedances at a considerable percentage of regulatory measurement stations locally (up to 21% in Germany and 35% in the United Kingdom) and in distant countries through long-range transport, and increase the cumulative health-related metric SOMO35 (maximum percent increase of ~28%) throughout the region. Findings indicate that VOC emissions are important for ozone enhancement, and to a lesser extent NOx, meaning that VOC regulation for a future European shale gas industry will be of especial importance to mitigate unfavorable health outcomes. Overall our findings demonstrate that shale gas production in Europe can worsen ozone air quality on both the local and regional scales.
Human mortality shows a pronounced temperature dependence. The minimum mortality temperature (MMT) as a characteristic point of the temperature-mortality relationship is influenced by many factors. As MMT estimates are based on case studies, they are sporadic, limited to data-rich regions, and their drivers have not yet been clearly identified across case studies. This impedes the elaboration of spatially comprehensive impact studies on heat-related mortality and hampers the temporal transfer required to assess climate change impacts. Using 400 MMTs from cities, we systematically establish a generalised model that is able to estimate MMTs (in daily apparent temperature) for cities, based on a set of climatic, topographic and socio-economic drivers. A sigmoid model prevailed against alternative model setups due to having the lowest Akaike Information Criterion (AICc) and the smallest RMSE. We find the long-term climate, the elevation, and the socio-economy to be relevant drivers of our MMT sample within the non-linear parametric regression model. A first model application estimated MMTs for 599 European cities ( >100 000 inhabitants) and reveals a pronounced decrease in MMTs (27.8-16 degrees C) from southern to northern cities. Disruptions of this pattern across regions of similar mean temperatures can be explained by socio-economic standards as noted for central eastern Europe. Our alternative method allows to approximate MMTs independently from the availability of daily mortality records. For the first time, a quantification of climatic and non-climatic MMT drivers has been achieved, which allows to consider changes in socio-economic conditions and climate. This work contributes to the comparability among MMTs beyond location-specific and regional limits and, hence, towards a spatially comprehensive impact assessment for heat-related mortality.
Soil degradation is a severe and growing threat to ecosystem services globally. Soil loss is often nonlinear, involving a rapid deterioration from a stable eco-geomorphic state once a tipping point is reached. Soil loss thresholds have been studied at plot scale, but for landscapes, quantitative constraints on the necessary and sufficient conditions for tipping points are rare. Here, we document a landscape-wide eco-geomorphic tipping point at the edge of the Tibetan Plateau and quantify its drivers and erosional consequences. We show that in the upper Kali Gandaki valley, Nepal, soil formation prevailed under wetter conditions during much of the Holocene. Our data suggest that after a period of human pressure and declining vegetation cover, a 20% reduction of relative humidity and precipitation below 200 mm/year halted soil formation after 1.6 ka and promoted widespread gullying and rapid soil loss, with irreversible consequences for ecosystem services.
Cosmic-ray neutron sensing (CRNS) is a promising non-invasive technique to estimate snow water equivalent (SWE) over large areas. In contrast to preliminary studies focusing on shallow snow conditions (SWE <130 mm), more recently the method was shown experimentally to be sensitive also to deeper snowpacks providing the basis for its use at mountain experimental sites. However, hysteretic neutron response has been observed for complex snow cover including patchy snow-free areas. In the present study we aimed to understand and support the experimental findings using a comprehensive neutron modeling approach. Several simulations have been set up in order to disentangle the effect on the signal of different land surface characteristics and to reproduce multiple observations during periods of snow melt and accumulation. To represent the actual land surface heterogeneity and the complex snow cover, the model used data from terrestrial laser scanning. The results show that the model was able to accurately reproduce the CRNS signal and particularly the hysteresis effect during accumulation and melting periods. Moreover, the sensor footprint was found to be anisotropic and affected by the spatial distribution of liquid water and snow as well as by the topography of the nearby mountains. Under fully snow-covered conditions the CRNS is able to accurately estimate SWE without prior knowledge about snow density profiles or other spatial anomalies. These results provide new insights into the characteristics of the detected neutron signal in complex terrain and support the use of CRNS for long-term snow monitoring in high elevated mountain environments.
The significance of phytoliths for the control of silicon (Si) fluxes from terrestrial to aquatic ecosystems has been recognized as a key factor. Humankind actively influences Si fluxes by intensified land use, i.e., agriculture and forestry, on a global scale. We hypothesized phytolith distribution and assemblages in soils of agricultural and forestry sites to be controlled by vegetation (which is directed by land use) with direct effects on extractable Si fractions driven mainly by phytolith characteristics, i.e., dissolution status (dissolution signs) and morphology (morphotype proportions). To test our hypothesis we combined different chemical extraction methods (calcium chloride, ammonium oxalate, Tiron) for the quantification of different Si fractions (plant available Si, Si adsorbed to/occluded in pedogenic oxides/hydroxides, amorphous Si) and microscopic techniques (light microscopy, confocal laser scanning microscopy, scanning electron microscopy) for detailed analyses of phytoliths extracted using gravimetric separation (physical extraction) from exemplary loess soils of agricultural (arable land and grassland/meadow) and forestry (beech and pine) sites in Poland. We found differences in dissolution signs, morphotype proportions, and vertical distribution of phytoliths in soil horizons per site. In general, dominant morphotypes of assignable phytoliths in the studied soil profiles were elongate phytoliths and short cells, both of which are typical for grass-dominated vegetation. However, the organic layers of forest soils were dominated by globular phytoliths, which are typical indicators for mosses. As expected soil horizons under different vegetation generally were characterized by differences in extractable Si fractions, especially in the upper soil horizons. However, phytogenic Si pools counter-intuitively showed no correlations with chemically extracted Si fractions and soil pH at all. Our findings indicate that it is necessary to combine microscopic analyses and Si extraction techniques for examinations of Si cycling in biogeosystems, because extractions of Si fractions alone do not allow drawing any conclusions about phytolith characteristics or interactions between phytolith pools and chemically extractable Si fractions and do not necessarily reflect phytogenic Si pool quantities in soils and vice versa.
High spectral resolution (hyperspectral) remote sensing has already demonstrated its capabilities for soil constituent mapping based on absorption feature parameters. This paper tests different parametrizations of the 1.75 μm gypsum feature for the determination of gypsum abundances, from the laboratory to remote sensing applications of recent as well as upcoming hyperspectral sensors. In particular, this study focuses on remote sensing imagery over the large body of the Omongwa pan located in the Namibian Kalahari. Four common absorption feature parameters are compared: band ratio through the introduction of the Normalized Differenced Gypsum Index (NDGI), the shape-based parameters Slope, and Half-Area, and the Continuum Removed Absorption Depth (CRAD). On laboratory soil samples from the pan, CRAD and NDGI approaches perform best to determine gypsum content tested in cross validated regression models with XRD mineralogical data (R² = 0.84 for NDGI and R² = 0.86 for CRAD). Subsequently the laboratory prediction functions are transferred to remote sensing imagery of spaceborne Hyperion, airborne HySpex and simulated spaceborne EnMAP sensor. Variable results were obtained depending on sensor characteristics, data quality, preprocessing and spectral parameters. Overall, the CRAD parameter in this wavelength region proved not to be robust for remote sensing applications, and the simple band ratio based parameter, the NDGI, proved robust and is recommended for future use for the determination of gypsum content in bare soils based on remote sensing hyperspectral imagery.
In this study, we detect high percentile rainfall events in the eastern central Andes, based on Tropical Rainfall Measuring Mission (TRMM) with a spatial resolution of 0.25 × 0.25°, a temporal resolution of 3 h, and for the duration from 2001 to 2018. We identify three areas with high mean accumulated rainfall and analyze their atmospheric behaviour and rainfall characteristics with specific focus on extreme events. Extreme events are defined by events above the 95th percentile of their daily mean accumulated rainfall. Austral summer (DJF) is the period of the year presenting the most frequent extreme events over these three regions. Daily statistics show that the spatial maxima, as well as their associated extreme events, are produced during the night. For the considered period, ERA-Interim reanalysis data, provided by the European Centre for Medium-Range Weather Forecasts (ECMWF) with 0.75° x0.75° spatial and 6-hourly temporal resolutions, were used for the analysis of the meso- and synoptic-scale atmospheric patterns. Night- and day-time differences indicate a nocturnal overload of northerly and northeasterly low-level humidity flows arriving from tropical South America. Under these conditions, cooling descending air from the mountains may find unstable air at the surface, giving place to the development of strong local convection. Another possible mechanism is presented here: a forced ascent of the low-level flow due to the mountains, disrupting the atmospheric stratification and generating vertical displacement of air trajectories. A Principal Component Analysis (PCA) in T-mode is applied to day- and night-time data during the maximum and extreme events. The results show strong correlation areas over each subregion under study during night-time, whereas during day-time no defined patterns are found. This confirms the observed nocturnal behavior of rainfall within these three hotspots.
Localization processes in the viscous lower crust generate ductile shear zones over a broad range of scales affecting long‐term lithosphere deformation and the mechanical response of faults during the seismic cycle. Here we use centimeter‐scale numerical models in order to gain detailed insight into the processes involved in strain localization and rheological weakening in viscously deforming rocks. Our 2‐D Cartesian models are benchmarked to high‐temperature and high‐pressure torsion experiments on Carrara marble samples containing a single weak Solnhofen limestone inclusion. The models successfully reproduce bulk stress‐strain transients and final strain distributions observed in the experiments by applying a simple, first‐order softening law that mimics rheological weakening. We find that local stress concentrations forming at the inclusion tips initiate strain localization inside the host matrix. At the tip of the propagating shear zone, weakening occurs within a process zone, which expands with time from the inclusion tips toward the matrix. Rheological weakening is a precondition for shear zone localization, and the width of this shear zone is found to be controlled by the degree of softening. Introducing a second softening step at elevated strain, a high strain layer develops inside the localized shear zone, analogous to the formation of ultramylonite bands in mylonites. These results elucidate the transient evolution of stress and strain rate during inception and maturation of ductile shear zones.
Evolution of Large-Scale Magnetic Fields From Near-Earth Space During the Last 11 Solar Cycles
(2019)
We use hourly mean magnetic field measurements from 34 midlatitude geomagnetic observatories between 1900 and 2015 to investigate the long-term evolution and driving mechanism of the large-scale external magnetic field at ground. The Hourly Magnetospheric Currents index (HMC) is derived as a refinement of the Annual Magnetospheric Currents index (HMC, Pick & Korte, 2017, https://doi.org/10.1093/gji/ggx367). HMC requires an extensive revision of the observatory hourly means. It depends on three third party geomagnetic field models used to eliminate the core, the crustal, and the ionospheric solar-quiet field contributions. We mitigate the dependency of HMC on the core field model by subtracting only nondipolar components of the model from the data. The separation of the residual (dipolar) signal into internal and external (HMC) parts is the main methodological challenge. Observatory crustal biases are updated with respect to AMC, and the solar-quiet field estimation is extended to the past based on a reconstruction of solar radio flux (F10.7). We find that HMC has more power at low frequencies (periods = 1 year) than the Dcx index, especially at periods relevant to the solar cycle. Most of the slow variations in HMC can be explained by the open solar magnetic flux. There is a weakly decreasing linear trend in absolute HMC from 1900 to present, which depends sensitively on the data rejection criteria at early years. HMC is well suited for studying long-term variations of the geomagnetic field.
Solar wind observations show that geomagnetic storms are mainly driven by interplanetary coronal mass ejections (ICMEs) and corotating or stream interaction regions (C/SIRs). We present a binary classifier that assigns one of these drivers to 7,546 storms between 1930 and 2015 using ground‐based geomagnetic field observations only. The input data consists of the long‐term stable Hourly Magnetospheric Currents index alongside the corresponding midlatitude geomagnetic observatory time series. This data set provides comprehensive information on the global storm time magnetic disturbance field, particularly its spatial variability, over eight solar cycles. For the first time, we use this information statistically with regard to an automated storm driver identification. Our supervised classification model significantly outperforms unskilled baseline models (78% accuracy with 26[19]% misidentified interplanetary coronal mass ejections [corotating or stream interaction regions]) and delivers plausible driver occurrences with regard to storm intensity and solar cycle phase. Our results can readily be used to advance related studies fundamental to space weather research, for example, studies connecting galactic cosmic ray modulation and geomagnetic disturbances. They are fully reproducible by means of the underlying open‐source software (Pick, 2019, http://doi.org/10.5880/GFZ.2.3.2019.003)
Garnet of eclogite (formerly termed garnet clinopyroxenite) hosted in lenses of orogenic garnet peridotite from the Granulitgebirge, NW Bohemian Massif, contains unique inclusions of granitic melt, now either glassy or crystallized. Analysed glasses and re‐homogenized inclusions are hydrous, peraluminous, and enriched in highly incompatible elements characteristic of the continental crust such as Cs, Li, B, Pb, Rb, Th, and U. The original melt thus represents a pristine, chemically evolved metasomatic agent, which infiltrated the mantle via deep continental subduction during the Variscan orogeny. The bulk chemical composition of the studied eclogites is similar to that of Fe‐rich basalt and the enrichment in LILE and U suggest a subduction‐related component. All these geochemical features confirm metasomatism. In comparison with many other garnet+clinopyroxene‐bearing lenses in peridotites of the Bohemian Massif, the studied samples from Rubinberg and Klatschmühle are more akin to eclogite than pyroxenites, as reflected in high jadeite content in clinopyroxene, relatively low Mg, Cr, and Ni but relatively high Ti. However, trace elements of both bulk rock and individual mineral phases show also important differences making these samples rather unique. Metasomatism involving a melt requiring a trace element pattern very similar to the composition reported here has been suggested for the source region of rocks of the so‐called durbachite suite, that is, ultrapotassic melanosyenites, which are found throughout the high‐grade Variscan basement. Moreover, the Th, U, Pb, Nb, Ta, and Ti patterns of these newly studied melt inclusions (MI) strongly resemble those observed for peridotite and its enclosed pyroxenite from the T‐7 borehole (Staré, České Středhoři Mountains) in N Bohemia. This suggests that a similar kind of crustal‐derived melt also occurred here. This study of granitic MI in eclogites from peridotites has provided the first direct characterization of a preserved metasomatic melt, possibly responsible for the metasomatism of several parts of the mantle in the Variscides.
Selenite pseudomorphs
(2019)
During lower sea levels in glacial periods, deep permafrost formed on large continental shelf areas of the Arctic Ocean. Subsequent sea level rise and coastal erosion created subsea permafrost, which generally degrades after inundation under the influence of a complex suite of marine, near-shore processes. Global warming is especially pronounced in the Arctic, and will increase the transition to and the degradation of subsea permafrost, with implications for atmospheric climate forcing, offshore infrastructure, and aquatic ecosystems.
This thesis combines new geophysical, borehole observational and modelling approaches to enhance our understanding of subsea permafrost dynamics. Three specific areas for advancement were identified: (I) sparsity of observational data, (II) lacking implementation of salt infiltration mechanisms in models, and (III) poor understanding of the regional differences in key driving parameters. This study tested the combination of spectral ratios of the ambient vibration seismic wavefield, together with estimated shear wave velocity from seismic interferometry analysis, for estimating the thickness of the unfrozen sediment overlying the ice-bonded permafrost offshore. Mesoscale numerical calculations (10^1 to 10^2 m, thousands of years) were employed to develop and solve the coupled heat diffusion and salt transport equations including phase change effects. Model soil parameters were constrained by borehole data, and the impact of a variety of influences during the transgression was tested in modelling studies. In addition, two inversion schemes (particle swarm optimization and a least-square method) were used to reconstruct temperature histories for the past 200-300 years in the Laptev Sea region in Siberia from two permafrost borehole temperature records. These data were evaluated against larger scale reconstructions from the region.
It was found (I) that peaks in spectral ratios modelled for three-layer, one-dimensional systems corresponded with thaw depths. Around Muostakh Island in the central Laptev Sea seismic receivers were deployed on the seabed. Derived depths of the ice-bonded permafrost table were between 3.7-20.7 m ± 15 %, increasing with distance from the coast. (II) Temperatures modelled during the transition to subsea permafrost resembled isothermal conditions after about 2000 years of inundation at Cape Mamontov Klyk, consistent with observations from offshore boreholes. Stratigraphic scenarios showed that salt distribution and infiltration had a large impact on the ice saturation in the sediments. Three key factors were identified that, when changed, shifted the modelled permafrost thaw depth most strongly: bottom water temperatures, shoreline retreat rate and initial temperature before inundation. Salt transport based on diffusion and contribution from arbitrary density-driven mechanisms only accounted for about 50 % of observed thaw depths at offshore sites hundreds to thousands of years after inundation. This bias was found consistently at all three sites in the Laptev Sea region. (III) In the temperature reconstructions, distinct differences in the local temperature histories between the western Laptev Sea and the Lena Delta sites were recognized, such as a transition to warmer temperatures a century later in the western Laptev Sea as well as a peak in warming three decades later. The local permafrost surface temperature history at Sardakh Island in the Lena Delta was reminiscent of the circum-Arctic regional average trends. However, Mamontov Klyk in the western Laptev Sea was consistent to Arctic trends only in the most recent decade and was more similar to northern hemispheric mean trends. Both sites were consistent with a rapid synoptic recent warming.
In conclusion, the consistency between modelled response, expected permafrost distribution, and observational data suggests that the passive seismic method is promising for the determination of the thickness of unfrozen sediment on the continental Arctic shelf. The quantified gap between currently modelled and observed thaw depths means that the impact of degradation on climate forcing, ecosystems, and infrastructure is larger than current models predict. This discrepancy suggests the importance of further mechanisms of salt penetration and thaw that have not been considered – either pre-inundation or post-inundation, or both. In addition, any meaningful modelling of subsea permafrost would have to constrain the identified key factors and their regional differences well. The shallow permafrost boreholes provide missing well-resolved short-scale temperature information in the coastal permafrost tundra of the Arctic. As local differences from circum-Arctic reconstructions, such as later warming and higher warming magnitude, were shown to exist in this region, these results provide a basis for local surface temperature record parameterization of climate and, in particular, permafrost models. The results of this work bring us one step further to understanding the full picture of the transition from terrestrial to subsea permafrost.
Introducing PebbleCounts
(2019)
Grain-size distributions are a key geomorphic metric of gravel-bed rivers. Traditional measurement methods include manual counting or photo sieving, but these are achievable only at the 1–10 ㎡ scale. With the advent of drones and increasingly high-resolution cameras, we can now generate orthoimagery over hectares at millimeter to centimeter resolution. These scales, along with the complexity of high-mountain rivers, necessitate different approaches for photo sieving. As opposed to other image segmentation methods that use a watershed approach, our open-source algorithm, PebbleCounts, relies on k-means clustering in the spatial and spectral domain and rapid manual selection of well-delineated grains. This improves grain-size estimates for complex riverbed imagery, without post-processing. We also develop a fully automated method, PebbleCountsAuto, that relies on edge detection and filtering suspect grains, without the k-means clustering or manual selection steps. The algorithms are tested in controlled indoor conditions on three arrays of pebbles and then applied to 12 × 1 ㎡ orthomosaic clips of high-energy mountain rivers collected with a camera-on-mast setup (akin to a low-flying drone). A 20-pixel b-axis length lower truncation is necessary for attaining accurate grain-size distributions. For the k-means PebbleCounts approach, average percentile bias and precision are 0.03 and 0.09 ψ, respectively, for ∼1.16 mm pixel⁻¹ images, and 0.07 and 0.05 ψ for one 0.32 mm pixel⁻¹ image. The automatic approach has higher bias and precision of 0.13 and 0.15 ψ, respectively, for ∼1.16 mm pixel⁻¹ images, but similar values of −0.06 and 0.05 ψ for one 0.32 mm pixel⁻¹ image. For the automatic approach, only at best 70 % of the grains are correct identifications, and typically around 50 %. PebbleCounts operates most effectively at the 1 ㎡ patch scale, where it can be applied in ∼5–10 min on many patches to acquire accurate grain-size data over 10–100 ㎡ areas. These data can be used to validate PebbleCountsAuto, which may be applied at the scale of entire survey sites (102–104 ㎡ ). We synthesize results and recommend best practices for image collection, orthomosaic generation, and grain-size measurement using both algorithms.
The interactions between atmosphere and steep topography in the eastern south–central Andes result in complex relations with inhomogenous rainfall distributions. The atmospheric conditions leading to deep convection and extreme rainfall and their spatial patterns—both at the valley and mountain-belt scales—are not well understood. In this study, we aim to identify the dominant atmospheric conditions and their spatial variability by analyzing the convective available potential energy (CAPE) and dew-point temperature (Td). We explain the crucial effect of temperature on extreme rainfall generation along the steep climatic and topographic gradients in the NW Argentine Andes stretching from the low-elevation eastern foreland to the high-elevation central Andean Plateau in the west. Our analysis relies on version 2.0 of the ECMWF’s (European Centre for Medium-RangeWeather Forecasts) Re-Analysis (ERA-interim) data and TRMM (Tropical Rainfall Measuring Mission) data. We make the following key observations: First, we observe distinctive gradients along and across strike of the Andes in dew-point temperature and CAPE that both control rainfall distributions. Second, we identify a nonlinear correlation between rainfall and a combination of dew-point temperature and CAPE through a multivariable regression analysis. The correlation changes in space along the climatic and topographic gradients and helps to explain controlling factors for extreme-rainfall generation. Third, we observe more contribution (or higher importance) of Td in the tropical low-elevation foreland and intermediate-elevation areas as compared to the high-elevation central Andean Plateau for 90th percentile rainfall. In contrast, we observe a higher contribution of CAPE in the intermediate-elevation area between low and high elevation, especially in the transition zone between the tropical and subtropical areas for the 90th percentile rainfall. Fourth, we find that the parameters of the multivariable regression using CAPE and Td can explain rainfall with higher statistical significance for the 90th percentile compared to lower rainfall percentiles. Based on our results, the spatial pattern of rainfall-extreme events during the past ∼16 years can be described by a combination of dew-point temperature and CAPE in the south–central Andes.
The Arctic-Boreal regions experience strong changes of air temperature and precipitation regimes, which affect the thermal state of the permafrost. This results in widespread permafrost-thaw disturbances, some unfolding slowly and over long periods, others occurring rapidly and abruptly. Despite optical remote sensing offering a variety of techniques to assess and monitor landscape changes, a persistent cloud cover decreases the amount of usable images considerably. However, combining data from multiple platforms promises to increase the number of images drastically. We therefore assess the comparability of Landsat-8 and Sentinel-2 imagery and the possibility to use both Landsat and Sentinel-2 images together in time series analyses, achieving a temporally-dense data coverage in Arctic-Boreal regions. We determined overlapping same-day acquisitions of Landsat-8 and Sentinel-2 images for three representative study sites in Eastern Siberia. We then compared the Landsat-8 and Sentinel-2 pixel-pairs, downscaled to 60 m, of corresponding bands and derived the ordinary least squares regression for every band combination. The acquired coefficients were used for spectral bandpass adjustment between the two sensors. The spectral band comparisons showed an overall good fit between Landsat-8 and Sentinel-2 images already. The ordinary least squares regression analyses underline the generally good spectral fit with intercept values between 0.0031 and 0.056 and slope values between 0.531 and 0.877. A spectral comparison after spectral bandpass adjustment of Sentinel-2 values to Landsat-8 shows a nearly perfect alignment between the same-day images. The spectral band adjustment succeeds in adjusting Sentinel-2 spectral values to Landsat-8 very well in Eastern Siberian Arctic-Boreal landscapes. After spectral adjustment, Landsat and Sentinel-2 data can be used to create temporally-dense time series and be applied to assess permafrost landscape changes in Eastern Siberia. Remaining differences between the sensors can be attributed to several factors including heterogeneous terrain, poor cloud and cloud shadow masking, and mixed pixels.
The Atlantic Meridional Overturning Circulation (AMOC) is likely the most well-known system of ocean currents on Earth, redistributing heat, nutrients and carbon over a large part of the Earth’s surface and affecting global climate as a result. Due to enhanced freshwater fluxes into the subpolar North Atlantic as a response to global warming, the AMOC is expected, and may have already started, to weaken and these changes will likely have global impacts. It is therefore of considerable relevance to improve our understanding of past and future AMOC changes. My thesis tries to answer some of the open questions in this field by giving strong evidence that the AMOC has already weakened over the last century, by narrowing future projections of this slowdown and
by studying the impacts on global surface warming.
While there have been various studies trying to reconstruct the strength of the overturning circulation in the past, often based on model simulations in combination with observations (Jackson et al., 2016, Kanzow et al., 2010) or proxies (Frajka-Williams, 2015, Latif et al., 2006), the results so far, due to lack of direct measurements, have been inconclusive. In the first paper I build on previous work that links the anomalously low sea surface temperatures (SSTs) in the North Atlantic with the reduced meridional heat transport due to a weaker AMOC. Using the output of a high-resolution global climate model, I derive a characteristic spatial and seasonal SST fingerprint of an AMOC slowdown and an improved SST-based AMOC index. The same fingerprint is seen in
the observational SSTs since the late 19th Century, giving strong evidence that since then the AMOC has slowed down. In addition, the reconstruction of the historical overturning strength with the new AMOC index agrees well with and extends the results of earlier studies as well as the direct measurements from the RAPID project and shows a strong decline of the AMOC by about 15% (3±1 Sv) since the mid-20th Century (Caesar et al., 2018).
The reconstruction of the historical overturning strength with the AMOC index enables us to weight future AMOC projections based on their skill in modeling the historical AMOC as described in the second paper of this thesis (Olson et al., 2018). Using Bayesian model averaging we considerably narrow the projections of the CMIP5 ensemble to a decrease of -4.0 Sv and -6.8 Sv between the years 1960-1999 and 2060-2099 for the RCP4.5 and RCP8.5 emission scenarios, respectively. These values fit to, yet are at the lower end of, previously published estimates.
In the third paper I examine how the AMOC slowdown affects the global mean surface temperature (GMST) with a focus on how it will change the ocean heat uptake (OHC). Accounting for the effect of changes in the radiative forcing on the GMST, I test how AMOC variations correlate with the residual part of surface temperature changes in the past. I find that the correlation is positive which fits the understanding that the deep-water formation that is important in driving the AMOC cools the deep ocean and therefore warms the surface (Caesar et al., 2019). The future weakening of the overturning circulation could therefore delay global surface warming.
Due to nonlinear behavior and scale specific changes it can be difficult to study the dominant processes and modes that drive climate variability. In the fourth paper we develop and test a new technique based on the wavelet multiscale correlation (WMC) similarity measure to study climate variability on different temporal and spatial scales (Agarwal et al., 2018). In a fifth contribution to my thesis this method is applied to the observed sea surface temperatures. The results reconfirm well-known relations between SST anomalies such as the El Niño-Southern Oscillation (ENSO) and the Pacific Decadal Oscillation (PDO) on inter-annual and decadal timescales, respectively. They
furthermore give new insights into the characteristics and origins of long-range teleconnections, for example, that the teleconnection between ENSO and Indian Ocean dipole exist mainly between the northern part of the ENSO tongue and the equatorial Indian Ocean, and provides therefore valuable knowledge about the regions that are necessary to include when modeling regional climate variability at a certain scale (Agarwal et al., 2019).
In summary, my PhD thesis investigates past and future AMOC variability and its effects on global mean surface temperature by utilizing a combination of observational sea surface data and the output of historical and future climate model simulations from both the high-resolution CM2.6 model as well as the CMIP5 ensemble. It further includes the development and validation of a new method to study climate variability, that, applied to the observed sea surface temperatures, gives new insight about teleconnections in the Earth System. My findings provide evidence that the AMOC has already slowed down, will continue to do so in the future, and will impact the global mean temperature. Further impacts of an AMOC slowdown may include increased sea-level rise at the U.S. east coast (Ezer, 2015), heat extremes in Europe (Duchez et al., 2016) and increased storm activity in the North Atlantic region (Jackson et al., 2015), all of which have significant socio-economic implications.
Hydrometeorological hazards caused losses of approximately 110 billion U.S. Dollars in 2016 worldwide. Current damage estimations do not consider the uncertainties in a comprehensive way, and they are not consistent between spatial scales. Aggregated land use data are used at larger spatial scales, although detailed exposure data at the object level, such as openstreetmap.org, is becoming increasingly available across the globe.We present a probabilistic approach for object-based damage estimation which represents uncertainties and is fully scalable in space. The approach is applied and validated to company damage from the flood of 2013 in Germany. Damage estimates are more accurate compared to damage models using land use data, and the estimation works reliably at all spatial scales. Therefore, it can as well be used for pre-event analysis and risk assessments. This method takes hydrometeorological damage estimation and risk assessments to the next level, making damage estimates and their uncertainties fully scalable in space, from object to country level, and enabling the exploitation of new exposure data.
Abstract. The Sea of Marmara, in northwestern Turkey, is a transition zone where the dextral North Anatolian Fault zone (NAFZ) propagates westward from the Anatolian Plate to the Aegean Sea Plate. The area is of interest in the context of seismic hazard of Istanbul, a metropolitan area with about 15 million inhabitants. Geophysical observations indicate that the crust is heterogeneous beneath the Marmara basin, but a detailed characterization of the crustal heterogeneities is still missing. To assess if and how crustal heterogeneities are related to the NAFZ segmentation below the Sea of Marmara, we develop new crustal-scale 3-D density models which integrate geological and seismological data and that are additionally constrained by 3-D gravity modeling. For the latter, we use two different gravity datasets including global satellite data and local marine gravity observation. Considering the two different datasets and the general non-uniqueness in potential field modeling, we suggest three possible “end-member” solutions that are all consistent with the observed gravity field and illustrate the spectrum of possible solutions. These models indicate that the observed gravitational anomalies originate from significant density heterogeneities within the crust. Two layers of sediments, one syn-kinematic and one pre-kinematic with respect to the Sea of Marmara formation are underlain by a heterogeneous crystalline crust. A felsic upper crystalline crust (average density of 2720 kgm⁻³) and an intermediate to mafic lower crystalline crust (average density of 2890 kgm⁻³) appear to be cross-cut by two large, dome-shaped mafic highdensity bodies (density of 2890 to 3150 kgm⁻³) of considerable thickness above a rather uniform lithospheric mantle (3300 kgm⁻³). The spatial correlation between two major bends of the main Marmara fault and the location of the highdensity bodies suggests that the distribution of lithological heterogeneities within the crust controls the rheological behavior along the NAFZ and, consequently, maybe influences fault segmentation and thus the seismic hazard assessment in the region.
Sea surface temperature (SST) patterns can – as surface climate forcing – affect weather and climate at large distances. One example is El Niño-Southern Oscillation (ENSO) that causes climate anomalies around the globe via teleconnections. Although several studies identified and characterized these teleconnections, our understanding of climate processes remains incomplete, since interactions and feedbacks are typically exhibited at unique or multiple temporal and spatial scales. This study characterizes the interactions between the cells of a global SST data set at different temporal and spatial scales using climate networks. These networks are constructed using wavelet multi-scale correlation that investigate the correlation between the SST time series at a range of scales allowing instantaneously deeper insights into the correlation patterns compared to traditional methods like empirical orthogonal functions or classical correlation analysis. This allows us to identify and visualise regions of – at a certain timescale – similarly evolving SSTs and distinguish them from those with long-range teleconnections to other ocean regions. Our findings re-confirm accepted knowledge about known highly linked SST patterns like ENSO and the Pacific Decadal Oscillation, but also suggest new insights into the characteristics and origins of long-range teleconnections like the connection between ENSO and Indian Ocean Dipole.
Determining the optimal grid resolution for topographic analysis on an airborne lidar dataset
(2019)
Digital elevation models (DEMs) are a gridded representation of the surface of the Earth and typically contain uncertainties due to data collection and processing. Slope and aspect estimates on a DEM contain errors and uncertainties inherited from the representation of a continuous surface as a grid (referred to as truncation error; TE) and from any DEM uncertainty. We analyze in detail the impacts of TE and propagated elevation uncertainty (PEU) on slope and aspect.
Using synthetic data as a control, we define functions to quantify both TE and PEU for arbitrary grids. We then develop a quality metric which captures the combined impact of both TE and PEU on the calculation of topographic metrics. Our quality metric allows us to examine the spatial patterns of error and uncertainty in topographic metrics and to compare calculations on DEMs of different sizes and accuracies.
Using lidar data with point density of ∼10 pts m−2 covering Santa Cruz Island in southern California, we are able to generate DEMs and uncertainty estimates at several grid resolutions. Slope (aspect) errors on the 1 m dataset are on average 0.3∘ (0.9∘) from TE and 5.5∘ (14.5∘) from PEU. We calculate an optimal DEM resolution for our SCI lidar dataset of 4 m that minimizes the error bounds on topographic metric calculations due to the combined influence of TE and PEU for both slope and aspect calculations over the entire SCI. Average slope (aspect) errors from the 4 m DEM are 0.25∘ (0.75∘) from TE and 5∘ (12.5∘) from PEU. While the smallest grid resolution possible from the high-density SCI lidar is not necessarily optimal for calculating topographic metrics, high point-density data are essential for measuring DEM uncertainty across a range of resolutions.
The habilitation thesis presented here includes results from several studies dealing with fluid-rock interactions and rock deformation processes in active fault zones. The focus in all of these studies is on the influence of clay minerals on the geochemical and the hydro-mechanical behavior of the fault rocks. The research was conducted on rock cores and cuttings from four scientific drilling projects at the San Andreas Fault (USA), the Nankai Trough subduction zone and the Japan Trench subduction zone (Japan), as well as the Alpine Fault in New Zealand. These ICDP (International Continental Scientific Drilling Program) and IODP (International Ocean Discovery Program) funded projects were all conducted with the aim to monitor and better understand earthquakes.
Chapter 1 contains a short introduction to the topic with basic principles and objectives regarding the research approach. Chapter 2 describes the state of the art in clay mineral and fault zone science, gives a short description of the individual drilling projects and their locations on which the research was based, and summarizes the most important analytical methods used. Chapter 3 comprises ten peer-reviewed publications that are connected thematically and methodologically. The papers were published in the years 2006-2015, and additional related publications including myself as co-author are given in the literature list. The ten publications address different questions concerning the formation of clay minerals and processes of fluid-rock interaction in active fault zones. Six papers contain results from the SAFOD drilling project, USA (San Andreas Fault Observatory at Depth), with the main focus on fluid-rock interaction processes in fault rocks and the formation and location of clay minerals. Three publications report on research from the NanTroSEIZE drilling project (Nankai Trough Seismogenic Zone Experiment) and the JFAST drilling project (Japan Trench Fast Drilling Project). Both projects are situated in Japan. Here, the swelling behavior of smectite clay minerals in relation to changing environmental conditions (e.g. temperature and/or humidity) was investigated. The last publication included here concerns a study from the DFDP project (Deep Fault Drilling Project) in New Zealand, where I investigated the deformation of clay minerals on the context of the hydro-mechanical behavior of the fault zone rocks. I was first author in nine of the publications and in charge of the project preparation, measurements and data analyses, and the completion of the manuscript. As co-author on the other publication I was responsible for electronmicroscopy analyses (SEM and TEM) and their interpretation.
The key results from the publications in Chapter 3 are discussed in Chapter 4 with additional considerations from more recent papers. Following the major theses in Chapter 5, Chapter 6 highlights a future research project in clay mineralogy research at the GFZ. An appendix includes more detailed descriptions of the laboratory equipment and lists of all publications, conference contributions and teaching courses and modules.
The semiarid northeast of Brazil is one of the most densely populated dryland regions in the world and recurrently affected by severe droughts. Thus, reliable seasonal forecasts of streamflow and reservoir storage are of high value for water managers. Such forecasts can be generated by applying either hydrological models representing underlying processes or statistical relationships exploiting correlations among meteorological and hydrological variables. This work evaluates and compares the performances of seasonal reservoir storage forecasts derived by a process-based hydrological model and a statistical approach.
Driven by observations, both models achieve similar simulation accuracies. In a hindcast experiment, however, the accuracy of estimating regional reservoir storages was considerably lower using the process-based hydrological model, whereas the resolution and reliability of drought event predictions were similar by both approaches. Further investigations regarding the deficiencies of the process-based model revealed a significant influence of antecedent wetness conditions and a higher sensitivity of model prediction performance to rainfall forecast quality.
Within the scope of this study, the statistical model proved to be the more straightforward approach for predictions of reservoir level and drought events at regionally and monthly aggregated scales. However, for forecasts at finer scales of space and time or for the investigation of underlying processes, the costly initialisation and application of a process-based model can be worthwhile. Furthermore, the application of innovative data products, such as remote sensing data, and operational model correction methods, like data assimilation, may allow for an enhanced exploitation of the advanced capabilities of process-based hydrological models.
We measure valence-to-core x-ray emission spectra of compressed crystalline GeO₂ up to 56 GPa and of amorphous GeO₂ up to 100 GPa. In a novel approach, we extract the Ge coordination number and mean Ge-O distances from the emission energy and the intensity of the Kβ'' emission line. The spectra of high-pressure polymorphs are calculated using the Bethe-Salpeter equation. Trends observed in the experimental and calculated spectra are found to match only when utilizing an octahedral model. The results reveal persistent octahedral Ge coordination with increasing distortion, similar to the compaction mechanism in the sequence of octahedrally coordinated crystalline GeO₂ high-pressure polymorphs.
When dealing with issues that are of high societal relevance, Earth sciences still face a lack of acceptance, which is partly rooted in insufficient communication strategies on the individual and local community level. To increase the efficiency of communication routines, science has to transform its outreach concepts to become more aware of individual needs and demands. The “encoding/decoding” concept as well as critical intercultural communication studies can offer pivotal approaches for this transformation.