Refine
Has Fulltext
- yes (712) (remove)
Year of publication
Document Type
- Doctoral Thesis (404)
- Postprint (136)
- Article (88)
- Preprint (35)
- Habilitation Thesis (21)
- Conference Proceeding (11)
- Master's Thesis (11)
- Monograph/Edited Volume (3)
- Course Material (2)
- Bachelor Thesis (1)
Keywords
- Synchronisation (19)
- diffusion (19)
- data analysis (13)
- synchronization (13)
- Datenanalyse (12)
- Klimawandel (10)
- Nichtlineare Dynamik (10)
- anomalous diffusion (10)
- Spektroskopie (9)
- Synchronization (9)
Institute
- Institut für Physik und Astronomie (712) (remove)
Phase synchronization analysis, including our recently introduced multivariate approach, is applied to event-related EEG data from an experiment on language processing, following a classic psycholinguistic paradigm. For the two types of experimental manipulation distinct effects in overall synchronization are found; for one of them they can also be localized. The synchronization effects occur earlier than those found by the conventional analysis method, indicating that the new approach provides additional information on the underlying neuronal process.
This thesis deals with the encoding and transmission of information through a quantum channel. A quantum channel is a quantum mechanical system whose state is manipulated by a sender and read out by a receiver. The individual state of the channel represents the message. The two topics of the thesis comprise 1) the possibility of compressing a message stored in a quantum channel without loss of information and 2) the possibility to communicate a message directly from one party to another in a secure manner, that is, a third party is not able to eavesdrop the message without being detected. The main results of the thesis are the following. A general framework for variable-length quantum codes is worked out. These codes are necessary to make lossless compression possible. Due to the quantum nature of the channel, the encoded messages are in general in a superposition of different lengths. It is found to be impossible to compress a quantum message without loss of information if the message is not apriori known to the sender. In the other case it is shown that lossless quantum data compression is possible and a lower bound on the compression rate is derived. Furthermore, an explicit compression scheme is constructed that works for arbitrarily given source message ensembles. A quantum cryptographic protocol - the “ping-pong protocol” - is presented that realizes the secure direct communication of classical messages through a quantum channel. The security of the protocol against arbitrary eavesdropping attacks is proven for the case of an ideal quantum channel. In contrast to other quantum cryptographic protocols, the ping-pong protocol is deterministic and can thus be used to transmit a random key as well as a composed message. The protocol is perfectly secure for the transmission of a key, and it is quasi-secure for the direct transmission of a message. The latter means that the probability of successful eavesdropping exponentially decreases with the length of the message.
We theoretically discuss the interaction of neutral particles (atoms, molecules) with surfaces in the regime where it is mediated by the electromagnetic field. A thorough characterization of the field at sub-wavelength distances is worked out, including energy density spectra and coherence functions. The results are applied to typical situations in integrated atom optics, where ultracold atoms are coupled to a thermal surface, and to single molecule probes in near field optics, where sub-wavelength resolution can be achieved.
Electrets are materials capable of storing oriented dipoles or an electric surplus charge for long periods of time. The term "electret" was coined by Oliver Heaviside in analogy to the well-known word "magnet". Initially regarded as a mere scientific curiosity, electrets became increasingly imporant for applications during the second half of the 20th century. The most famous example is the electret condenser microphone, developed in 1962 by Sessler and West. Today, these devices are produced in annual quantities of more than 1 billion, and have become indispensable in modern communications technology. Even though space-charge electrets are widely used in transducer applications, relatively little was known about the microscopic mechanisms of charge storage. It was generally accepted that the surplus charges are stored in some form of physical or chemical traps. However, trap depths of less than 2 eV, obtained via thermally stimulated discharge experiments, conflicted with the observed lifetimes (extrapolations of experimental data yielded more than 100000 years). Using a combination of photostimulated discharge spectroscopy and simultaneous depth-profiling of the space-charge density, the present work shows for the first time that at least part of the space charge in, e.g., polytetrafluoroethylene, polypropylene and polyethylene terephthalate is stored in traps with depths of up to 6 eV, indicating major local structural changes. Based on this information, more efficient charge-storing materials could be developed in the future. The new experimental results could only be obtained after several techniques for characterizing the electrical, electromechanical and electrical properties of electrets had been enhanced with in situ capability. For instance, real-time information on space-charge depth-profiles were obtained by subjecting a polymer film to short laser-induced heat pulses. The high data acquisition speed of this technique also allowed the three-dimensional mapping of polarization and space-charge distributions. A highly active field of research is the development of piezoelectric sensor films from electret polymer foams. These materials store charges on the inner surfaces of the voids after having been subjected to a corona discharge, and exhibit piezoelectric properties far superior to those of traditional ferroelectric polymers. By means of dielectric resonance spectroscopy, polypropylene foams (presently the most widely used ferroelectret) were studied with respect to their thermal and UV stability. Their limited thermal stability renders them unsuitable for applications above 50 °C. Using a solvent-based foaming technique, we found an alternative material based on amorphous Teflon® AF, which exhibits a stable piezoelectric coefficient of 600 pC/N at temperatures up to 120 °C.
In festen azobenzenhaltigen Polymeren wurde bei Bestrahlung mit blauem Licht ein makroskopischer Materialtransport beobachtet. Um die Dynamik der Gitterentstehung zu verfolgen, wurde am Speicherring für Synchrotronstrahlung ein Gitterschreibaufbau errichtet. Damit konnte erstmals in dieser Arbeit die Gitterbildungsgeschwindigkeit in-situ simultan mit Röntgen- und Lichtstreuung untersucht werden. Mit Hilfe einer speziellen Anpassung der Röntgenstreutheorie konnten sehr gute Übereinstimmungen von theoretischen Berechnungen mit den Messergebnissen erzielt werden. Dabei konnte nachgewiesen werden, dass sich zeitgleich mit einem Oberflächengitter auch ein Dichtegitter entwickelt. Durch die Trennung beider Streuanteile ließ sich die Dynamik der Strukturentstehungen bestimmen. Des weiteren konnte erstmals mit Hilfe der Photoelektronenspektroskopie die molekulare Orientierung an der Oberfläche eines Oberflächengitters nachgewiesen werden. Die Bewegungsursache kann auf einen Impulsübertrag während der Isomerisierung zurückgeführt werden, während die Bewegungsrichtung durch den elektrischen Feldvektor festgelegt wird. Die Theorie der Gitterentstehung konnte verbessert werden.
The correlations between the chemical structures of the 2,5-diphenyl-1,3,4-oxadiazole compounds and their corresponding vapour deposited film structures on Si/SiO2 were systematically investigated with AFM, XSR and IR for the first time. The result shows that the film structure depends strongly on the substrate temperature (Ts). For the compounds with ether bridge group, the film periodicity depends linearly on the length of the aliphatic chain. The films based on those oxadiazols have ordered structure in the investigated substrate temperature region, while die amide bridged compounds form ordered film only at high Ts due to the formation of intermolecular H-bond. The tilt angle of most molecules is determined by the pi-pi complexes between the molecules. The intermolecular interaction between head groups leads to the structural transformation during the thermal treatment after deposition. All the ether bridged oxadiazoles form films with bilayer structure, while amide bridged oxadiazole form film bilayer structure only when the molecule has a head group.
Collisions of black holes and neutron stars, named mixed binaries in the following, are interesting because of at least two reasons. Firstly, it is expected that they emit a large amount of energy as gravitational waves, which could be measured by new detectors. The form of those waves is expected to carry information about the internal structure of such systems. Secondly, collisions of such objects are the prime suspects of short gamma ray bursts. The exact mechanism for the energy emission is unknown so far. In the past, Newtonian theory of gravitation and modifications to it were often used for numerical simulations of collisions of mixed binary systems. However, near to such objects, the gravitational forces are so strong, that the use of General Relativity is necessary for accurate predictions. There are a lot of problems in general relativistic simulations. However, systems of two neutron stars and systems of two black holes have been studies extensively in the past and a lot of those problems have been solved. One of the remaining problems so far has been the use of hydrodynamic on excision boundaries. Inside excision regions, no evolution is carried out. Such regions are often used inside black holes to circumvent instabilities of the numerical methods near the singularity. Methods to handle hydrodynamics at such boundaries have been described and tests are shown in this work. One important test and the first application of those methods has been the simulation of a collapsing neutron star to a black hole. The success of these simulations and in particular the performance of the excision methods was an important step towards simulations of mixed binaries. Initial data are necessary for every numerical simulation. However, the creation of such initial data for general relativistic situations is in general very complicated. In this work it is shown how to obtain initial data for mixed binary systems using an already existing method for initial data of two black holes. These initial data have been used for evolutions of such systems and problems encountered are discussed in this work. One of the problems are instabilities due to different methods, which could be solved by dissipation of appropriate strength. Another problem is the expected drift of the black hole towards the neutron star. It is shown, that this can be solved by using special gauge conditions, which prevent the black hole from moving on the computational grid. The methods and simulations shown in this work are only the starting step for a much more detailed study of mixed binary system. Better methods, models and simulations with higher resolution and even better gauge conditions will be focus of future work. It is expected that such detailed studies can give information about the emitted gravitational waves, which is important in view of the newly built gravitational wave detectors. In addition, these simulations could give insight into the processes responsible for short gamma ray bursts.
The occurrence of earthquakes is characterized by a high degree of spatiotemporal complexity. Although numerous patterns, e.g. fore- and aftershock sequences, are well-known, the underlying mechanisms are not observable and thus not understood. Because the recurrence times of large earthquakes are usually decades or centuries, the number of such events in corresponding data sets is too small to draw conclusions with reasonable statistical significance. Therefore, the present study combines both, numerical modeling and analysis of real data in order to unveil the relationships between physical mechanisms and observational quantities. The key hypothesis is the validity of the so-called "critical point concept" for earthquakes, which assumes large earthquakes to occur as phase transitions in a spatially extended many-particle system, similar to percolation models. New concepts are developed to detect critical states in simulated and in natural data sets. The results indicate that important features of seismicity like the frequency-size distribution and the temporal clustering of earthquakes depend on frictional and structural fault parameters. In particular, the degree of quenched spatial disorder (the "roughness") of a fault zone determines whether large earthquakes occur quasiperiodically or more clustered. This illustrates the power of numerical models in order to identify regions in parameter space, which are relevant for natural seismicity. The critical point concept is verified for both, synthetic and natural seismicity, in terms of a critical state which precedes a large earthquake: a gradual roughening of the (unobservable) stress field leads to a scale-free (observable) frequency-size distribution. Furthermore, the growth of the spatial correlation length and the acceleration of the seismic energy release prior to large events is found. The predictive power of these precursors is, however, limited. Instead of forecasting time, location, and magnitude of individual events, a contribution to a broad multiparameter approach is encouraging.
We investigate the rotational and thermal properties of star-forming molecular clouds using hydrodynamic simulations. Stars form from molecular cloud cores by gravoturbulent fragmentation. Understanding the angular momentum and the thermal evolution of cloud cores thus plays a fundamental role in completing the theoretical picture of star formation. This is true not only for current star formation as observed in regions like the Orion nebula or the ρ-Ophiuchi molecular cloud but also for the formation of stars of the first or second generation in the universe. In this thesis we show how the angular momentum of prestellar and protostellar cores evolves and compare our results with observed quantities. The specific angular momentum of prestellar cores in our models agree remarkably well with observations of cloud cores. Some prestellar cores go into collapse to build up stars and stellar systems. The resulting protostellar objects have specific angular momenta that fall into the range of observed binaries. We find that collapse induced by gravoturbulent fragmentation is accompanied by a substantial loss of specific angular momentum. This eases the "angular momentum problem" in star formation even in the absence of magnetic fields. The distribution of stellar masses at birth (the initial mass function, IMF) is another aspect that any theory of star formation must explain. We focus on the influence of the thermodynamic properties of star-forming gas and address this issue by studying the effects of a piecewise polytropic equation of state on the formation of stellar clusters. We increase the polytropic exponent γ from a value below unity to a value above unity at a certain critical density. The change of the thermodynamic state at the critical density selects a characteristic mass scale for fragmentation, which we relate to the peak of the IMF observed in the solar neighborhood. Our investigation generally supports the idea that the distribution of stellar masses depends mainly on the thermodynamic state of the gas. A common assumption is that the chemical evolution of the star-forming gas can be decoupled from its dynamical evolution, with the former never affecting the latter. Although justified in some circumstances, this assumption is not true in every case. In particular, in low-metallicity gas the timescales for reaching the chemical equilibrium are comparable or larger than the dynamical timescales. In this thesis we take a first approach to combine a chemical network with a hydrodynamical code in order to study the influence of low levels of metal enrichment on the cooling and collapse of ionized gas in small protogalactic halos. Our initial conditions represent protogalaxies forming within a fossil HII region -- a previously ionized HII region which has not yet had time to cool and recombine. We show that in these regions, H2 is the dominant and most effective coolant, and that it is the amount of H2 formed that controls whether or not the gas can collapse and form stars. For metallicities Z <= 10<sup>-3 Zsun, metal line cooling alters the density and temperature evolution of the gas by less than 1% compared to the metal-free case at densities below 1 cm<sup>-3 and temperatures above 2000 K. We also find that an external ultraviolet background delays or suppresses the cooling and collapse of the gas regardless of whether it is metal-enriched or not. Finally, we study the dependence of this process on redshift and mass of the dark matter halo.
Im Rahmen dieser Arbeit wurde ein besseres Verständnis der Kopplung der Troposphäre und der Stratosphäre in den mittleren und polaren Breiten der Nordhemisphäre (NH) auf Monatszeitskalen erzielt, die auf die Ausbreitung von quasi-stationären Wellen zurückzuführen ist. Der Schwerpunkt lag dabei auf den dynamisch aktiven Wintermonaten, welche die grösste Variabilität aufweisen. Die troposphärische Variabilität wird zum Grossteil durch bevorzugte Zirkulationsstrukturen, den Telekonnexionsmustern, bestimmt. Mittels einer rotierten EOF-Analyse der geopotenziellen Höhe in 500 hPa wurden die wichtigsten regionalen troposphärischen Telekonnexionsmuster der Nordhemisphäre berechnet. Diese lassen sich drei grossen geografischen Regionen zuordnen; dem nordatlantisch-europäischen Raum, Eurasien und dem pazifisch-nordamerikanischen Raum. Da es sich um die stärksten troposphärischen Variabilitätsmuster handelt, wurden sie als grundlegende troposphärische Grössen herangezogen, um dynamische Zusammenhänge zwischen der troposphärischen und der stratosphärischen Zirkulation zu untersuchen. Dabei wurde anhand von instantanen und zeitverzögerten Korrelationsanalysen der troposphärischen Muster mit stratosphärischen Variablen erstmalig gezeigt, dass unterschiedliche regionale troposphärische Telekonnexionsmuster unterschiedliche Auswirkungen auf die stratosphärische Zirkulation haben. Es ergaben sich für die pazifisch-nordamerikanischen Muster signifikante instantane Korrelationen mit quasi-barotropen Musterstrukturen und für die nordatlantisch-europäischen Muster zonalsymmetrische Ringstrukturen ab 1978 mit signifikanten Korrelationswerten über tropischen und subtropischen Breiten und inversen Korrelationswerten über polaren Gebieten. Bei einer Untersuchung des Einflusses der stratosphärischen Variabilität wurde gezeigt, dass sich die stärkste Kopplung von nordatlantisch-europäischen Telekonnexionsmustern mit der stratosphärischen Zirkulation bei einem in Richtung Europa verschobenen Polarwirbel ergibt, wodurch die signifikanten Korrelationen ab 1978 erklärt werden können. Eine zonal gemittelte und vor allem lokale Untersuchung der Wellenausbreitungsbedingungen während dieser stratosphärischen Situation zeigt, dass es zu schwächeren Windgeschwindigkeiten in der Stratosphäre im Bereich von Nordamerika und des westlichen Nordatlantiks kommt und sich dadurch die Wellenausbreitungsbedingungen in diesem geografischen Bereich für planetare Wellen verbessern. Durch die stärkere Wellenausbreitung kommt es zu einer stärkeren Wechselwirkung mit dem Polarjet, wobei dieser abgebremst wird. Diese Abbremsung führt zu einer Verstärkung der meridionalen Residualzirkulation. D. h., wenn es zu einer verstärkten Wellenanregung im Nordatlantik und über Europa kommt, ist die Reaktion der Residualzirkulation bei einem nach Europa verschobenem Polarwirbel besonders stark. Die quasi-barotropen Korrelationsstrukturen, die sich bei den pazifisch-nordamerikanischen Mustern zeigen, weisen aufgrund von abnehmenden Störungsamplituden mit zunehmender Höhe, keiner Westwärtsneigung und einem negativen Brechungsindex im Pazifik auf verschwindende Wellen hin, die als Lösung der Wellengleichung bei negativem Brechungsindex auftreten. Dies wird durch den Polarjet, der im Bereich des Pazifiks stets sehr weit in Richtung Norden verlagert ist, verursacht. Abschliessend wurde in dieser Arbeit untersucht, ob die gefundenen Zusammenhänge von nordatlantisch-europäischen Telekonnexionsmustern mit der stratosphärischen Zirkulation auch von einem Atmosphärenmodell wiedergegeben werden können. Dazu wurde ein transienter 40-Jahre-Klimalauf des ECHAM4.L39(DLR)/CHEM Modells mit möglichst realistischen Antrieben erstmalig auf die Kopplung der Troposphäre und der Stratosphäre analysiert. Dabei konnten sowohl die troposphärischen, als auch die stratosphärischen Variabilitätsmuster vom Modell simuliert werden. Allerdings zeigen sich in den stratosphärischen Mustern Phasenverschiebungen in den Wellenzahl-1-Strukturen und ihre Zeitreihen weisen keinen signifikanten Trend ab 1978 auf. Die Kopplung der nordatlantisch-europäischen Telekonnexionsmuster mit der stratosphärischen Zirkulation zeigt eine wesentlich schwächere Reaktion der meridionalen Residualzirkulation. Somit stellte sich heraus, dass insbesondere die stratosphärische Zirkulation im Modell starke Diskrepanzen zu den Beobachtungen zeigt, die wiederum Einfluss auf die Wellenausbreitungsbedingungen haben. Es wird damit deutlich, dass für eine richtige Wiedergabe der Wellenausbreitung und somit der Kopplung der Troposphäre und Stratosphäre die stratosphärische Zirkulation eine wichtige Rolle spielt.
Das Strahlungsfeld in einem absorbierenden, periodischen Dielektrikum ist kanonisch quantisiert worden. Dabei wurde ein eindimensionales Modell mit punktförmigen Streuern betrachtet, deren Polarisierbarkeit den Kramers-Kronig Relationen gehorcht. Es wurde ein Quantisierungsverfahren nach Knöll, Scheel und Welsch [1] verwendet, das als eine Ergänzung zum mikroskopischen Huttner-Barnett Schema [2] aufgefaßt werden kann und in dem auf der Basis der phänomenologischen Maxwell Gleichungen eine bosonische Rauschpolarisation als die Quelle des Feldes auftritt. Das Problem reduziert sich dabei auf die Bestimmung der klassischenGreens Funktion. Die Kramers-Kronig Relationen der komplexen Polarisierbarkeit der Punktstreuer sichert die korrekte Verknüpfung zwischen Dispersion und Absorption. Der Punktstreuer ist dabei ein idealisiertes Modell, um periodische Hintergrundmedien, denen das Strahlungsfeld ausgesetzt ist, zu beschreiben. Er bedarf jedoch eines Kompromisses, um die entsprechenden Rauschquellen zu konstruieren. Es konnte gezeigt werden, daß der Punktstreuer dasselbe Streuverhalten wie eine dünne Potentialschwelle besitzt und damit die technischen Schwierigkeiten für den Fall eines absorptiven Punktstreuers überwunden werden können. An Hand dieses Beispiels konnte das Quantisierungsschema nach Knöll, Scheel und Welsch auf periodische und absorbierende Strukturen angewendet werden. Es ist bekannt, daß die Bestimmung der Modenstruktur für den Fall der Modenzerlegung des Strahlungsfeldes ein rein klassisches Problem darstellt. Mit Ausnahme des Vakuums ist eine zweckmäßige Modenzerlegung nur dann durchführbar, wenn mit einer reellen Polarisierbarkeit die Absorption vernachlässigt werden kann. Aus den Kramers-Kronig Relationen wird klar, daß solch eine Annahme nur in bestimmten Intervallen des Frequenzspektrums gerechtfertigt werden kann. Es wurde gezeigt, daß auch das quantisierte Strahlungsfeld in Anwesenheit der Punktstreuer in eben solchen Intervallen in Quasimoden entwickelt werden kann, wenn man neue Quasioperatoren als Erzeuger und Vernichter einführt. Die bosonischen Vertauschungsrelationen dieser Operatoren konnten bestätigt werden. Die allgemeine Vertauschungsrelation kanonisch konjugierter Variablen im Sinne der kanonischen Quantisierung kann für das elektrische Feld und das Vektorpotential beibehalten werden. In der Greens Funktion sind sämtliche Informationen über die dispersiven und absorptiven Eigenschaften des Dielektrikums sowie über die räumliche Struktur enthalten. Die wesentlichen Merkmale werden dabei durch den Reflexionskoeffizienten nach Boedecker und Henkel [3] bestimmt, der das Reflexionsverhalten an einem unendlich ausgedehnten Halbraum aus periodisch angeordneten Punktstreuern beschreibt. Mit Hilfe des Transfermatrixformalismus war es möglich einen allgemeinen Zugang zum Reflexionsverhalten zunächst endlicher Strukturen zu erhalten. Die Ausdehnung auf den Halbraum mit Hilfe der Klassifizierung in Untergruppen der Transfermatrizen nach ermöglichte es, den Reflexionskoeffizienten nach Boedecker und Henkel [3] auch geometrisch plausibel zu machen. Ein wesentlicher Aspekt von periodischen Systemen ist die Translationssymmetrie, die im Fall unendlich ausgedehnter, verlustfreier Systeme auf eine ideale Bandstruktur führt. Mit Hilfe der Untergruppenklassifizierung kann im verlustfreien Fall die Geometrie der Anordnung indirekt mit der Bandstruktur verknüpft werden. Es konnte nachgewiesen werden, daß auch der einzelne Punktstreuer immer in einer dieser Untergruppen zu finden ist. Dabei besitzt die Bandstruktur der unendlich periodischen Anordnung dieser Streuer immer eine von der Polarisierbarkeit abhängige Bandkante und eine von der Polarisierbarkeit unabhängige Bandkante. Die Bandstruktur, die mit den verlustbehafteten Feldern einhergeht, ist eine doppelt komplexe. Alternativ zu dieser nur schwer zu interpretierenden Bandstruktur wurden die Feldfluktuationen selektiv nach reellen Frequenzen und Wellenzahlen sondiert. Es zeigt sich, daß Absorption besonders in der Nähe der Bandkanten die Bänder verbreitert. Die Ergebnisse, die mit Hilfe der lokalen Zustandsdichtefunktion gewonnen wurden, konnten dabei bestätigt werden. [1] S. Scheel, L. Knöll and D. G. Welsch, Phys.Rev. A 58, 700 (1998). [2] B. Huttner and S. M. Barnett, Phys. Rev. A 46, 4306 (1992). [3] G. Boedecker and C. Henkel, OPTICS EXPRESS 11, 1590 (2003).
In this thesis the magnetohydrodynamic jet formation and the effects of magnetic diffusion on the formation of axisymmetric protostellar jets have been investigated in three different simulation sets. The time-dependent numerical simulations have been performed, using the magnetohydrodynamic ZEUS-3D code.
Adhesion of biological cells to their environment is mediated by two-dimensional clusters of specific adhesion molecules which are assembled in the plasma membrane of the cells. Due to the activity of the cells or external influences, these adhesion sites are usually subject to physical forces. In recent years, the influence of such forces on the stability of cellular adhesion clusters was increasingly investigated. In particular, experimental methods that were originally designed for the investigation of single bond rupture under force have been applied to investigate the rupture of adhesion clusters. The transition from single to multiple bonds, however, is not trivial and requires theoretical modelling. Rupture of biological adhesion molecules is a thermally activated, stochastic process. In this work, a stochastic model for the rupture and rebinding dynamics of clusters of parallel adhesion molecules under force is presented. In particular, the influence of (i) a constant force as it may be assumed for cellular adhesion clusters is investigated and (ii) the influence of a linearly increasing force as commonly used in experiments is considered. Special attention is paid to the force-mediated cooperativity of parallel adhesion bonds. Finally, the influence of a finite distance between receptors and ligands on the binding dynamics is investigated. Thereby, the distance can be bridged by polymeric linker molecules which tether the ligands to a substrate.
Die vorliegende Arbeit beschäftigte sich mit zwei Themengebieten. Es ging zum einen um die mechanischen Eigenschaften von Polyelektrolythohlkapseln und zum anderen um die Adhäsion von Polyelektrolythohlkapseln. Die mechanischen Eigenschaften wurden mit der AFM „colloidal probe” Technik untersucht. Dabei zeigte sich, dass die Kraftdeformationskurven für kleine Deformationen den nach der Schalentheorie vorhergesagten linearen Verlauf haben. Ebenso wurde die quadratische Abhängigkeit der Federkonstanten von der Dicke bestätigt. Für PAH/PSS findet man einen E-Modul von 0.25 GPa. Zusammen mit der Tatsache, dass die Deformationskurven unabhängig von der Geschwindigkeit sind und praktisch keine Hysterese zeigen, sowie der Möglichkeit die Kapseln plastisch zu deformieren, kann man schließen, dass das System in einem glasartigen Zustand vorliegt. <pt>Erwartungsgemäß zeigte der pH einen starken Einfluss auf die PEM. Während in einem pH-Bereich zwischen 2 und 11.5 keine morphologischen Änderungen festgestellt werden konnten, vergrößerte sich der Radius bei pH = 12 um bis zu 50 %. Diese Radienänderung war reversibel und ging einher mit einem sichtbaren Weicherwerden der Kapseln. Eine Abnahme des E-Moduls um mindestens drei Größenordungen wurde durch Kraftdeformationsmessungen bestätigt. Die Kraftdeformationskurven zeigen eine starke Hysterese. Das System befindet sich nun nicht mehr in einem glasartigen Zustand, sondern ist viskos bis gummiartig geworden. Messungen an Kapseln, die mit Glutardialdehyd behandelt wurden, zeigten, dass die Behandlung das pH-abhängige Verhalten verändert. Dies kann darauf zurückgeführt werden, dass das PAH durch den Glutardialdehyd quervernetzt wird. Bei einem hohen Quervernetzungsgrad, zeigen die Kapseln keine Änderung des mechanischen Verhaltens bei pH = 12. Schwach quervernetzte Kapseln werden immer noch signifikant weicher bei pH = 12, jedoch ändert sich der Radius nicht. Außerdem wurden Multilagenkapseln untersucht, deren Stabilität nicht auf elektrostatischen Wechselwirkungen sondern auf Wasserstoffbrückenbindungen beruhte. Diese Kapseln zeigten eine deutlich höhere Steifigkeit mit E-Modulen bis zu 1 GPa. Es wurde gefunden, dass auch dieses System für kleine Deformationen ein lineares Kraft-Deformationsverhalten zeigt, und dass die Federkonstante quadratisch von der Dicke abhängt. Die Kapseln lösen sich praktisch sofort bei pH = 6.5 auf. In der Nähe dieses pHs konnte das Abnehmen der Federkonstanten verfolgt werden. Außerdem wurde das Adhäsionsverhalten von PAH/PSS Kapseln auf mit PEI-beschichtetem Glas untersucht. Die Adhäsionsflächen waren zu einem großen Teil rund und ließen sich quantitativ auswerten. Der Adhäsionsradius nimmt mit dem Kapselradius zu und mit der Dicke ab. Das Verhalten konnte mit zwei Modellen, einem für die große und einem für die kleine Deformation beschrieben werden. Das große Deformationsmodell liefert um eine Größenordung niedrigere Adhäsionsenergien als das kleine Deformationsmodell, welches mit Werten von ‑0.2 mJ/m<sup>2 Werte in einem plausiblen Bereich liefert. Es wurde gefunden, dass bei einem Verhältnis von Dicke zu Deformation von etwa eins "buckling" auftritt. Dieser Punkt markierte zugleich den Übergang von der großen zur kleinen Deformation.
Wetting and phase transitions play a very important role our daily life. Molecularly thin films of long-chain alkanes at solid/vapour interfaces (e.g. C30H62 on silicon wafers) are very good model systems for studying the relation between wetting behaviour and (bulk) phase transitions. Immediately above the bulk melting temperature the alkanes wet partially the surface (drops). In this temperature range the substrate surface is covered with a molecularly thin ordered, solid-like alkane film ("surface freezing"). Thus, the alkane melt wets its own solid only partially which is a quite rare phenomenon in nature. The thesis treats about how the alkane melt wets its own solid surface above and below the bulk melting temperature and about the corresponding melting and solidification processes. Liquid alkane drops can be undercooled to few degrees below the bulk melting temperature without immediate solidification. This undercooling behaviour is quite frequent and theoretical quite well understood. In some cases, slightly undercooled drops start to build two-dimensional solid terraces without bulk solidification. The terraces grow radially from the liquid drops on the substrate surface. They consist of few molecular layers with the thickness multiple of all-trans length of the molecule. By analyzing the terrace growth process one can find that, both below and above the melting point, the entire substrate surface is covered with a thin film of mobile alkane molecules. The presence of this film explains how the solid terrace growth is feeded: the alkane molecules flow through it from the undercooled drops to the periphery of the terrace. The study shows for the first time the coexistence of a molecularly thin film ("precursor") with partially wetting bulk phase. The formation and growth of the terraces is observed only in a small temperature interval in which the 2D nucleation of terraces is more likely than the bulk solidification. The nucleation mechanisms for 2D solidification are also analyzed in this work. More surprising is the terrace behaviour above bulk the melting temperature. The terraces can be slightly overheated before they melt. The melting does not occur all over the surface as a single event; instead small drops form at the terrace edge. Subsequently these drops move on the surface "eating" the solid terraces on their way. By this they grow in size leaving behind paths from were the material was collected. Both overheating and droplet movement can be explained by the fact that the alkane melt wets only partially its own solid. For the first time, these results explicitly confirm the supposed connection between the absence of overheating in solid and "surface melting": the solids usually start to melt without an energetic barrier from the surface at temperatures below the bulk melting point. Accordingly, the surface freezing of alkanes give rise of an energetic barrier which leads to overheating.
In the present work, we discuss two subjects related to the nonequilibrium dynamics of polymers or biological filaments adsorbed to two-dimensional substrates. The first part is dedicated to thermally activated dynamics of polymers on structured substrates in the presence or absence of a driving force. The structured substrate is represented by double-well or periodic potentials. We consider both homogeneous and point driving forces. Point-like driving forces can be realized in single molecule manipulation by atomic force microscopy tips. Uniform driving forces can be generated by hydrodynamic flow or by electric fields for charged polymers. In the second part, we consider collective filament motion in motility assays for motor proteins, where filaments glide over a motor-coated substrate. The model for the simulation of the filament dynamics contains interactive deformable filaments that move under the influence of forces from molecular motors and thermal noise. Motor tails are attached to the substrate and modeled as flexible polymers (entropic springs), motor heads perform a directed walk with a given force-velocity relation. We study the collective filament dynamics and pattern formation as a function of the motor and filament density, the force-velocity characteristics, the detachment rate of motor proteins and the filament interaction. In particular, the formation and statistics of filament patterns such as nematic ordering due to motor activity or clusters due to blocking effects are investigated. Our results are experimentally accessible and possible experimental realizations are discussed.
Unter atmosphärischen Zirkulationsregimen versteht man bevorzugte quasi-stationäre Zustände der atmosphärischen Zirkulation auf der planetaren Skala, die für eine bis mehrere Wochen persistieren können. Klimaänderungen, ob natürlich entstanden oder anthropogen verursacht, äußern sich in erster Linie durch Änderungen der Auftrittswahrscheinlichkeiten der natürlichen Regime. In der vorliegenden Arbeit wurden dynamische Mechanismen des Regimeverhaltens und der dekadischen Klimavariabilität der Atmosphäre bei Abwesenheit zeitlich veränderlicher externer Einflussfaktoren untersucht. Das Hauptwerkzeug dafür war ein quasi-geostrophisches Dreischichtenmodell der winterlichen atmosphärischen Zirkulation auf der Nordhemisphäre, das eine spektrale T21-Auflösung, einen orographischen und einen zeitlich konstanten thermischen Antrieb mit nicht-zonalen Anteilen besitzt. Ein solches Modell vermag großskalige atmosphärische Strömungsvorgänge außerhalb der Tropen mit einiger Genauigkeit zu simulieren. Nicht berücksichtigt werden Feuchteprozesse, die Wechselwirkung der Atmosphäre mit anderen Teilen des Klimasystems sowie anthropogene Einflüsse. Für das Dreischichtenmodell wurde ein automatisiertes, iteratives Verfahren zur Anpassung des thermischen Modellantriebs neu entwickelt. Jede Iteration des Verfahrens besteht aus einer Testintegration des Modells, ihrer Auswertung, dem Vergleich der Ergebnisse mit den NCEP-NCAR-Reanalysedaten aus den Wintermonaten Dezember, Januar und Februar sowie einer auf diesem Vergleich basierenden Antriebskorrektur. Nach Konvergenz des Verfahrens stimmt das Modell sowohl bezüglich des zonal gemittelten Klimazustandes als auch bezüglich der zeitgemittelten nicht-zonalen außertropischen diabatischen Erwärmung nahezu perfekt mit den wintergemittelten Reanalysedaten überein. In einer 1000-jährigen Simulation wurden die beobachtete mittlere Zirkulation im Winter sowie ihre Variabilität realitätsnah reproduziert, insbesondere die Arktische Oszillation (AO) und ihre vertikale Ausdehnung. Der AO-Index des Modells weist deutliche dekadische Schwankungen auf, die allein durch die interne Modelldynamik bedingt sind. Darüber hinaus zeigt das Modell ein Regimeverhalten, das gut mit den Beobachtungsdaten übereintimmt. Es besitzt ein Regime, das in etwa der negativen Phase der Nordatlantischen Oszillation (NAO) entspricht und eines, das der positiven Phase der AO ähnelt. Eine weit verbreitete Hypothese ist die näherungsweise Übereinstimmung zwischen Regimen und stationären Lösungen der Bewegungsgleichungen. In der vorliegenden Arbeit wurde diese Hypothese für das Dreischichtenmodell überprüft, mit negativem Resultat. Es wurden mittels eines Funktionalminimierungsverfahrens sechs verschiedene stationäre Zustände gefunden. Diese sind allesamt durch eine äußerst unrealistische Zirkulation gekennzeichnet und sind daher weit vom Modellattraktor entfernt. Fünf der sechs Zustände zeichnen sich durch einen extrem starken subtropischen Jet in der mittleren und obereren Modellschicht aus. Da die Ursache des Regimeverhaltens des Dreischichtenmodells nach wie vor unklar war, wurde auf ein einfacheres Modell, nämlich ein barotropes Modell mit T21-Auflösung zurückgegriffen. Für die Anpassung des Oberflächenantriebs wurde eine modifizierte Form der iterativen Prozedur verwendet. Die zeitgemittelte Zirkulation des barotropen Modells stimmt sehr gut mit der zeitlich und vertikal gemittelten Zirkulation des Dreischichtenmodells überein. Das dominierende räumliche Muster der Variabilität besitzt eine AO-ähnliche Struktur. Zudem besitzt das barotrope Modell zwei Regime, die näherungsweise der positiven und negativen Phase der AO entsprechen und somit auch den Regimen des Dreischichtenmodells ähneln. Im Verlauf der Justierung des Oberflächenantriebs konnte beobachtet werden, dass die zwei Regime des barotropen Modells durch die Vereinigung zweier koexistierender Attraktoren entstanden. Der wahrscheinliche Mechanismus der Attraktorvereinigung ist eine Randkrise eines der beiden Attraktoren, gefolgt von einer explosiven Bifurkation des anderen Attraktors. Es wird die Hypothese aufgestellt, dass der beim barotropen Modell vorgefundene Mechanismus der Regimeentstehung für atmosphärische Zirkulationsmodelle mit realitätsnahem Regimeverhalten Allgemeingültigkeit besitzt. Gestützt wird die Hypothese durch vier Experimente mit dem Dreischichtenmodell, bei denen jeweils der Parameter der Bodenreibung verringert und die Antriebsanpassung wiederholt wurde. Bei diesen Experimenten erhöhte sich die Persistenz und die Separiertheit der Regime bei abnehmender Reibung drastisch und damit auch der Anteil dekadischer Zeitskalen an der Variabilität. Die Zunahme der Persistenz der Regime ist charakteristisch für die Annäherung an eine inverse innere Krise, deren Existenz aber nicht nachgewiesen werden konnte.
In der vorliegenden Arbeit werden die Eigenschaften geschlossener fluider Membranen, sogenannter Vesikeln, bei endlichen Temperaturen untersucht. Dies beinhaltet Betrachtungen zur Form freier Vesikeln, eine Untersuchung des Adhäsionsverhaltens von Vesikeln an planaren Substraten sowie eine Untersuchung der Eigenschaften fluider Vesikeln in eingeschränkten Geometrien. Diese Untersuchungen fanden mit Hilfe von Monte-Carlo-Simulationen einer triangulierten Vesikeloberfläche statt. Die statistischen Eigenschaften der fluktuierenden fluiden Vesikeln wurden zum Teil mittels Freier-Energie-Profile analysiert. In diesem Zusammenhang wurde eine neuartige Histogrammethode entwickelt.<BR> Die Form für eine freie fluide Vesikel mit frei veränderlichem Volumen, die das Konfigurationsenergie-Funktional minimiert, ist im Falle verschwindender Temperatur eine Kugel. Mit Hilfe von Monte-Carlo-Simulationen sowie einem analytisch behandelbaren Modellsystem konnte gezeigt werden, daß sich dieses Ergebnis nicht auf endliche Temperaturen verallgemeinern lässt und statt dessen leicht prolate und oblate Vesikelformen gegenüber der Kugelgestalt überwiegen. Dabei ist die Wahrscheinlichkeit für eine prolate Form ein wenig gröoßer als für eine oblate. Diese spontane Asphärizität ist entropischen Ursprungs und tritt nicht bei zweidimensionalen Vesikeln auf. Durch osmotische Drücke in der Vesikel, die größer sind als in der umgebenden Flüssigkeit, lässt sich die Asphärizität reduzieren oder sogar kompensieren. Die Übergänge zwischen den beobachteten prolaten und oblaten Formen erfolgen im Bereich von Millisekunden in Abwesenheit osmotisch aktiver Partikel. Bei Vorhandensein derartiger Partikel ergeben sich Übergangszeiten im Bereich von Sekunden. Im Rahmen der Untersuchung des Adhäsionsverhaltens fluider Vesikeln an planaren, homogenen Substraten konnte mit Hilfe von Monte-Carlo-Simulationen festgestellt werden, dass die Eigenschaften der Kontaktfläche der Vesikeln stark davon abhängen, welche Kräfte den Kontakt bewirken. Für eine dominierende attraktive Wechselwirkung zwischen Substrat und Vesikelmembran sowie im Falle eines Massendichteunterschieds der Flüssigkeiten innerhalb und außerhalb der Vesikel, der die Vesikel auf das Substrat sinken lässt, fndet man innerhalb der Kontakt ache eine ortsunabhangige Verteilung des Abstands zwischen Vesikelmembran und Substrat. Drückt die Vesikel ohne Berücksichtigung osmotischer Effekte auf Grund einer Differenz der Massendichten der Membran und der umgebenden Flüssigkeit gegen das Substrat, so erhält man eine Abstandsverteilung zwischen Vesikelmembran und Substrat, die mit dem Abstand vom Rand der Kontaktfläche variiert. Dieser Effekt ist zudem temperaturabhängig. Ferner wurde die Adhäsion fluider Vesikeln an chemisch strukturierten planaren Substraten untersucht. Durch das Wechselspiel von entropischen Effekten und Konfigurationsenergien entsteht eine komplexe Abhängigkeit der Vesikelform von Biegesteifigkeit, osmotischen Bedingungen und der Geometrie der attraktiven Domänen. Für die Bestimmung der Biegesteifigkeit der Vesikelmembranen liefern die existierenden Verfahren stark voneinander abweichende Ergebnisse. In der vorliegenden Arbeit konnte mittels Monte-Carlo-Simulationen zur Bestimmung der Biegesteifigkeit anhand des Mikropipettenverfahrens von Evans gezeigt werden, dass dieses Verfahren die a priori für die Simulation vorgegebene Biegesteifigkeit im wesentlichen reproduzieren kann. Im Hinblick auf medizinisch-pharmazeutische Anwendungen ist der Durchgang fluider Vesikeln durch enge Poren relevant. In Monte-Carlo-Simulationen konnte gezeigt werden, dass ein spontaner Transport der Vesikel durch ein Konzentrationsgefälle osmotisch aktiver Substanzen, das den physiologischen Bedingungen entspricht, induziert werden kann. Es konnten die hierfür notwendigen osmotischen Bedingungen sowie die charakteristischen Zeitskalen abgeschätzt werden. Im realen Experiment sind Eindringzeiten in eine enge Pore im Bereich weniger Minuten zu erwarten. Ferner konnte beobachtet werden, dass bei Vesikeln mit einer homogenen, positiven spontanen Krümmung Deformationen hin zu prolaten Formen leichter erfolgen als bei Vesikeln ohne spontane Krümmung. Mit diesem Effekt ist eine Verringerung der Energiebarriere für das Eindringen in eine Pore verbunden, deren Radius nur wenig kleiner als der Vesikelradius ist.
Strong damped Lyman alpha absorption (DLA) lines seen spectra of distant quasar are believed to arise when the sight line to the quasar goes trough the disc of a galaxy or a proto galaxy. Most of the neutral matter in the universe is contained in these clouds of neutral hydrogen that cause the absorption lines. Hence these DLAs are reservoirs for the formation of stars and galaxies throughout the universe. Despite intensive efforts over more than two decades only few galaxies responsible for the DLAs have been found. The problem is that the galaxies that harbour the neutral clouds are not necessarily bright, and selecting galaxies based on absorption lines could well select different types of galaxies than found in large surveys. If we are to understand how galaxies form out of neutral gas clouds it is essential to locate the galaxies in which DLAs reside. This thesis explores the use of integral field spectroscopy (IFS) to observe quasars known to have strong absorption lines in their spectra. IFS allows us to obtain a spectrum at many spatial points close to the quasar, thus providing images and spectroscopy simultaneously. From the imaging part, we can directly identify objects, and from the spectroscopy we can calculate the distances to the objects. When the distance of the object found in emission matches the distance to the object that cause the DLA line, we have identified the absorbing galaxy. Using this technique, we have showed that we can successfully recover a few DLA galaxies known previously from the literature. In a survey aimed to increase the number of DLA galaxies we have identified eight new candidate DLA galaxies. The projected distances from the candidates to the quasar sight lines indicate that the DLA galaxies have sizes similar to local disc galaxies. Hence our results suggest that large discs may be present when the universe was just 2 billion years old. We furthermore find no differences between the sizes of the very distant DLA galaxies and those that are not so distant. The large sizes imply that their neutral hydrogen masses are also similar to those in local galaxies, but we argue that the DLA galaxies are not necessarily as luminous as the present day disc galaxies. Taking advantage of the three-dimensional view provided by the IFS data, the second part of this thesis investigates extended emission line regions arising in the quasar neighborhood. We find that extended emission line nebulae are common around quasars, and explore the effects that may be the cause. Some quasars are known to be powerful radio emitters while others are not detected at radio wavelengths. We find that significantly larger and brighter emission line nebulae are found around the quasars which have the brightest radio emission, and in particular those that have large radio jets. The existence of the nebulae can be interpreted as an interaction of the radio jet with the surrounding medium, but we can not rule out a scenario where there are density or temperature differences in the surrounding environment. Only for the brightest object, where additional velocity information can be derived from the IFS data, can we argue for an interaction. In conclusion the use of IFS to search for faint emission lines, both from point sources and extended nebulae provides exciting new results within the scientific areas studied here.
Stochastic information, to be understood as "information gained by the application of stochastic methods", is proposed as a tool in the assessment of changes in climate. This thesis aims at demonstrating that stochastic information can improve the consideration and reduction of uncertainty in the assessment of changes in climate. The thesis consists of three parts. In part one, an indicator is developed that allows the determination of the proximity to a critical threshold. In part two, the tolerable windows approach (TWA) is extended to a probabilistic TWA. In part three, an integrated assessment of changes in flooding probability due to climate change is conducted within the TWA. The thermohaline circulation (THC) is a circulation system in the North Atlantic, where the circulation may break down in a saddle-node bifurcation under the influence of climate change. Due to uncertainty in ocean models, it is currently very difficult to determine the distance of the THC to the bifurcation point. We propose a new indicator to determine the system's proximity to the bifurcation point by considering the THC as a stochastic system and using the information contained in the fluctuations of the circulation around the mean state. As the system is moved closer to the bifurcation point, the power spectrum of the overturning becomes "redder", i.e. more energy is contained in the low frequencies. Since the spectral changes are a generic property of the saddle-node bifurcation, the method is not limited to the THC, but it could also be applicable to other systems, e.g. transitions in ecosystems. In part two, a probabilistic extension to the tolerable windows approach (TWA) is developed. In the TWA, the aim is to determine the complete set of emission strategies that are compatible with so-called guardrails. Guardrails are limits to impacts of climate change or to climate change itself. Therefore, the TWA determines the "maneuvering space" humanity has, if certain impacts of climate change are to be avoided. Due to uncertainty it is not possible to definitely exclude the impacts of climate change considered, but there will always be a certain probability of violating a guardrail. Therefore the TWA is extended to a probabilistic TWA that is able to consider "probabilistic uncertainty", i.e. uncertainty that can be expressed as a probability distribution or uncertainty that arises through natural variability. As a first application, temperature guardrails are imposed, and the dependence of emission reduction strategies on probability distributions for climate sensitivities is investigated. The analysis suggests that it will be difficult to observe a temperature guardrail of 2°C with high probabilities of actually meeting the target. In part three, an integrated assessment of changes in flooding probability due to climate change is conducted. A simple hydrological model is presented, as well as a downscaling scheme that allows the reconstruction of the spatio-temporal natural variability of temperature and precipitation. These are used to determine a probabilistic climate impact response function (CIRF), a function that allows the assessment of changes in probability of certain flood events under conditions of a changed climate. The assessment of changes in flooding probability is conducted in 83 major river basins. Not all floods can be considered: Events that either happen very fast, or affect only a very small area can not be considered, but large-scale flooding due to strong longer-lasting precipitation events can be considered. Finally, the probabilistic CIRFs obtained are used to determine emission corridors, where the guardrail is a limit to the fraction of world population that is affected by a predefined shift in probability of the 50-year flood event. This latter analysis has two main results. The uncertainty about regional changes in climate is still very high, and even small amounts of further climate change may lead to large changes in flooding probability in some river systems.
Amphiphilic molecules contain a hydrophilic headgroup and a hydrophobic tail. The headgroup is polar or ionic and likes water, the tail is typically an aliphatic chain that cannot be accommodated in a polar environment. The prevailing molecular asymmetry leads to a spontaneous adsorption of amphiphiles at the air/water or oil/water interfaces. As a result, the surface tension and the surface rheology is changed. Amphiphiles are important tools to deliberately modify the interfacial properties of liquid interfaces and enable new phenomena such as foams which cannot be formed in a pure liquid. In this thesis we investigate the static and dynamic properties of adsorption layers of soluble amphiphiles at the air/water interface, the so called Gibbs monolayers. The classical way for an investigation of these systems is based on a thermodynamic analysis of the equilibrium surface tension as a function of the bulk composition in the framework of Gibbs theory. However, thermodynamics does not provide any structural information and several recent publications challenge even fundamental text book concepts. The experimental investigation faces difficulties imposed by the low surface coverage and the presence of dissolved amphiphiles in the adjacent bulk phase. In this thesis we used a suite of techniques with the sensitivity to detect less than a monolayer of molecules at the air-water interface. Some of these techniques are extremely complex such as infrared visible sum frequency generation (IR-VIS SFG) spectroscopy or second harmonic generation (SHG). Others are traditional techniques, such as ellipsometry employed in new ways and pushed to new limits. Each technique probes selectively different parts of the interface and the combination provides a profound picture of the interfacial architecture. The first part of the thesis is dedicated to the distribution of ions at interfaces. Adsorption layers of ionic amphiphiles serve as model systems allowing to produce a defined surface charge. The charge of the monolayer is compensated by the counterions. As a result of a complex zoo of interactions there will be a defined distribution of ions at the interface, however, its experimental determination is a big scientific challenge. We could demonstrate that a combination of linear and nonlinear techniques gives direct insights in the prevailing ion distribution. Our investigations reveal specific ion effects which cannot be described by classical Poisson-Boltzmann mean field type theories. Adsorption layer and bulk phase are in thermodynamic equilibrium, however, it is important to stress that there is a constant molecular exchange between adsorbed and dissolved species. This exchange process is a key element for the understanding of some of the thermodynamic properties. An excellent way to study Gibbs monolayers is to follow the relaxation from a non-equilibrium to an equilibrium state. Upon compression amphiphiles must leave the adsorption layer and dissolve in the adjacent bulk phase. Upon expansion amphiphiles must adsorb at the interface to restore the equilibrium coverage. Obviously the frequency of the expansion and compression cycles must match the molecular exchange processes. At too low frequencies the equilibrium is maintained at all times. If the frequency is too fast the system behaves as a monolayer of insoluble surfactants. In this thesis we describe an unique variant of an oscillating bubble technique that measures precisely the real and imaginary part of the complex dilational modulus E in a frequency range up to 500 Hz. The extension of about two decades in the time domain in comparison to the conventional method of an oscillating drop is a tremendous achievement. The imaginary part of the complex dilational modulus E is a consequence of a dissipative process which is interpreted as an intrinsic surface dilational viscosity. The IR-VIS SFG spectra of the interfacial water provide a molecular interpretation of the underlying dissipative process.
Subject of this work is the study of applications of the Galactic Microlensing effect, where the light of a distant star (source) is bend according to Einstein's theory of gravity by the gravitational field of intervening compact mass objects (lenses), creating multiple (however not resolvable) images of the source. Relative motion of source, observer and lens leads to a variation of deflection/magnification and thus to a time dependant observable brightness change (lightcurve), a so-called microlensing event, lasting weeks to months. The focus lies on the modeling of binary-lens events, which provide a unique tool to fully characterize the lens-source system and to detect extra-solar planets around the lens star. Making use of the ability of genetic algorithms to efficiently explore large and intricate parameter spaces in the quest for the global best solution, a modeling software (Tango) for binary lenses is developed, presented and applied to data sets from the PLANET microlensing campaign. For the event OGLE-2002-BLG-069 the 2nd ever lens mass measurement has been achieved, leading to a scenario, where a G5III Bulge giant at 9.4 kpc is lensed by an M-dwarf binary with total mass of M=0.51 solar masses at distance 2.9 kpc. Furthermore a method is presented to use the absence of planetary lightcurve signatures to constrain the abundance of extra-solar planets.
Bestimmung von Ozonabbauraten über der Arktis und Antarktis mittels Ozonsonden- und Satellitendaten
(2005)
Diese Arbeit beschäftigt sich mit der chemischen Ozonzerstörung im arktischen und antarktischen stratosphärischen Polarwirbel. Diese wird durch Abbauprodukte von anthropogen emittierten Fluorchlorkohlenwasserstoffen und Halonen, Chlor- und Bromradikale, verursacht. Studien in denen der gemessene und modellierte Ozonabbau verglichen wird zeigen, dass die Prozeße bekannt sind, der quantitative Verlauf allerdings nicht vollständig verstanden ist. Die Prozesse, die zur Ozonzerstörung führen sind in beiden Polarwirbeln ähnlich. Allerdings fällt als Konsequenz unterschiedlicher meteorologischer Bedingungen der chemische Ozonabbau im arktischen Polarwirbel weniger drastisch aus als über der Antarktis. Der arktische Polarwirbel ist im Mittel stärker dynamisch gestört als der antarktische und weist eine stärkere Jahr-zu-Jahr Variabilität auf. Das erschwert die Messung des chemischen Ozonabbaus. Zur Trennung des chemischen Ozonabbaus von der dynamischen Umverteilung des Ozons im arktischen Polarwirbel wurde die Matchmethode entwickelt. Bei dieser Methode werden Luftpakete innerhalb des Polarwirbels mehrfach beprobt, um den chemischen Anteil der Ozonänderung zu quantifizieren. Zur Identifizierung von doppelt beprobten Luftpaketen werden Trajektorien aus Windfeldern berechnet. Können zwei Messungen im Rahmen bestimmter Qualitätskriterien durch eine Trajektorie verbunden werden, kann die Ozondifferenz zwischen beiden Sondierungen berechnet und als chemischer Ozonabbau interpretiert werden. Eine solche Koinzidenz wird Match genannt. Der Matchmethode liegt ein statistischer Ansatz zugrunde, so dass eine Vielzahl solcher doppelt beprobter Luftmassen vorliegen muss, um gesicherte Aussagen über die Ozonzerstörung gewinnen zu können. So erhält man die Ozonzerstörung in einem bestimmten Zeitintervall, also Ozonabbauraten. Um die Anzahl an doppelt beprobten Luftpackten zu erhöhen wurde eine aktive Koordinierung der Ozonsondenaufstiege entwickelt. Im Rahmen dieser Arbeit wurden Matchkampagnen während des arktischen Winters 2002/2003 und zum ersten Mal während eines antarktischen Winter (2003) durchgeführt. Aus den gewonnenen Daten wurden Ozonabbauraten in beiden Polarwirbeln bestimmt. Diese Abbauraten dienen zum einen der Evaluierung von Modellen, ermöglichen aber auch den direkten Vergleich von Ozonabbauraten in beiden Polarwirbeln. Der Winter 2002/2003 war zu Beginn durch sehr tiefe Temperaturen in der mittleren und unteren Stratosphäre charakterisiert, so dass die Matchkampagne Ende November gestartet wurde. Ab Januar war der Polarwirbel zeitweise stark dynamisch gestört. Die Kampagne ging bis Mitte März. Für den Höhenbereich von 400 bis 550 K potentieller Temperatur (15-23 km) konnten Ozonabbauraten und der Verlust in der Gesamtsäule berechnet werden. Die Ozonabbauraten wurden in verschiedenen Tests auf ihre Stabilität überprüft. Der antarktische Polarwirbel war vom Beginn des Winters bis Mitte Oktober 2003 sehr kalt und stellte Ende September kurzzeitig den Rekord für die größte bisher aufgetretene Ozonloch-Fläche ein. Es konnten für den Kampagnenzeitraum, Anfang Juni bis Anfang Oktober, Ozonabbauraten im Höhenbereich von 400 bis 550 K potentieller Temperatur ermittelt werden. Der zeitliche Verlauf des Ozonabbaus war dabei auf fast allen Höhenniveaus identisch. Die Zunahme des Sonnenlichtes im Polarwirbel mit der Zeit führt zu einem starken Anwachsen der Ozonabbauraten. Ab Mitte September gingen die Ozonabbauraten auf Null zurück, da bis zu diesem Zeitpunkt das gesamte Ozon zwischen ca. 14 und 21 km zerstört wurde. Im letzten Teil der Arbeit wird ein neuer Algorithmus auf Basis der multivariaten Regression vorgestellt, mit dem Ozonabbauraten aus Ozonprofilen verschiedener Sensoren gleichzeitig berechnet werden können. Dabei können neben der Ozonabbaurate die systematischen Fehler zwischen den einzelnen Sensoren bestimmt werden. Dies wurde exemplarisch am antarktischen Winter 2003 für das 475 K potentielle Temperatur Niveau gezeigt. Neben den Ozonprofilen der Sonden wurden Daten von zwei Satellitenexperimenten verwendet. Die mit der multivariaten Matchtechnik berechneten Ozonabbauraten stimmen gut mit den Ozonabbauraten der Einzelsensor-Matchansätze überein.
This work explores the equilibrium structure and thermodynamic phase behavior of complexes formed by charged polymer chains (polyelectrolytes) and oppositely charged spheres (macroions). Polyelectrolyte-macroion complexes form a common pattern in soft-matter physics, chemistry and biology, and enter in numerous technological applications as well. From a fundamental point of view, such complexes are interesting in that they combine the subtle interplay between electrostatic interactions and elastic as well as entropic effects due to conformational changes of the polymer chain, giving rise to a wide range of structural properties. This forms the central theme of theoretical studies presented in this thesis, which concentrate on a number of different problems involving strongly coupled complexes, i.e. complexes that are characterized by a large adsorption energy and small chain fluctuations. In the first part, a global analysis of the structural phase behavior of a single polyelectrolyte-macroion complex is presented based on a dimensionless representation, yielding results that cover a wide range of realistic system parameters. Emphasize is made on the interplay between the effects due to the polyelectrolytes chain length, salt concentration and the macroion charge as well as the mechanical chain persistence length. The results are summarized into generic phase diagrams characterizing the wrapping-dewrapping behavior of a polyelectrolyte chain on a macroion. A fully wrapped chain state is typically obtained at intermediate salt concentrations and chain lengths, where the amount of polyelectrolyte charge adsorbed on the macroion typically exceeds the bare macroion charge leading thus to a highly overcharged complex. Perhaps the most striking features occur when a single long polyelectrolyte chain is complexed with many oppositely charged spheres. In biology, such complexes form between DNA (which carries the cell's genetic information) and small oppositely charged histone proteins serving as an efficient mechanism for packing a huge amount of DNA into the micron-size cell nucleus in eucaryotic cells. The resultant complex fiber, known as the chromatin fiber, appears with a diameter of 30~nm under physiological conditions. Recent experiments indicate a zig-zag spatial arrangement for individual DNA-histone complexes (nucleosome core particles) along the chromatin fiber. A numerical method is introduced in this thesis based on a simple generic chain-sphere cell model that enables one to investigate the mechanism of fiber formation on a systematic level by incorporating electrostatic and elastic contributions. As will be shown, stable complex fibers exhibit an impressive variety of structures including zig-zag, solenoidal and beads-on-a-string patterns, depending on system parameters such as salt concentration, sphere charge as well as the chain contour length (per sphere). The present results predict fibers of compact zig-zag structure within the physiologically relevant regime with a diameter of about 30~nm, when DNA-histone parameters are adopted. In the next part, a numerical method is developed in order to investigate the role of thermal fluctuations on the structure and thermodynamic phase behavior of polyelectrolyte-macroion complexes. This is based on a saddle-point approximation, which allows to describe the experimentally observed reaction (or complexation) equilibrium in a dilute solution of polyelectrolytes and macroions on a systematic level. This equilibrium is determined by the entropy loss a single polyelectrolyte chain suffers as it binds to an oppositely charged macroion. This latter quantity can be calculated from the spectrum of polyelectrolyte fluctuations around a macroion, which is determined by means of a normal-mode analysis. Thereby, a stability phase diagram is obtained, which exhibits qualitative agreement with experimental findings. At elevated complex concentrations, one needs to account for the inter-complex interactions as well. It will be shown that at small separations, complexes undergo structural changes in such a way that positive patches from one complex match up with negative patches on the other. Furthermore, one of the polyelectrolyte chains may bridge between the two complexes. These mechanisms lead to a strong inter-complex attraction. As a result, the second virial coefficient associated with the inter-complex interaction becomes negative at intermediate salt concentrations in qualitative agreement with recent experiments on solutions of nucleosome core particles.
Due to its relevance for global climate, the realistic representation of the Atlantic meridional overturning circulation (AMOC) in ocean models is a key task. In recent years, two paradigms have evolved around what are its driving mechanisms: diapycnal mixing and Southern Ocean winds. This work aims at clarifying what sets the strength of the Atlantic overturning components in an ocean general circulation model and discusses the role of spatially inhomogeneous mixing, numerical diffusion and winds. Furthermore, the relation of the AMOC with a key quantity, the meridional pressure difference is analyzed. Due to the application of a very low diffusive tracer advection scheme, a realistic Atlantic overturning circulation can be obtained that is purely wind driven. On top of the winddriven circulation, changes of density gradients are caused by increasing the parameterized eddy diffusion in the North Atlantic and Southern Ocean. The linear relation between the maximum of the Atlantic overturning and the meridional pressure difference found in previous studies is confirmed and it is shown to be due to one significant pressure gradient between the average pressure over high latitude deep water formation regions and a relatively uniform pressure between 30°N and 30°S, which can directly be related to a zonal flow through geostrophy. Under constant Southern Ocean windstress forcing, a South Atlantic outflow in the range of 6-16 Sv is obtained for a large variety of experiments. Overall, the circulation is winddriven but its strength not uniquely determined by the Southern Ocean windstress. The scaling of the Atlantic overturning components is linear with the background vertical diffusivity, not confirming the 2/3 power law for one-hemisphere models without wind forcing. The pycnocline depth is constant in the coarse resolution model with large vertical grid extends. It suggests the ocean model operates like the Stommel box model with a linear relation of the pressure difference and fixed vertical scale for the volume transport. However, this seems only valid for vertical diffusivities smaller 0.4 cm²/s, when the dominant upwelling within the Atlantic occurs along the boundaries. For larger vertical diffusivities, a significant amount of interior upwelling occurs. It is further shown that any localized vertical mixing in the deep to bottom ocean cannot drive an Atlantic overturning. However, enhanced boundary mixing at thermocline depths is potentially important. The numerical diffusion is shown to have a large impact on the representation of the Atlantic overturning in the model. While the horizontal numerical diffusion tends to destabilize the Atlantic overturning the verital numerical diffusion denotes an amplifying mechanism.
Origin and symmetry of the observed global magnetic fields in galaxies are not fully understood. We intend to clarify the question of the magnetic field origin and investigate the global action of the magneto-rotational instability (MRI) in galactic disks with the help of 3D global magneto-hydrodynamical (MHD) simulations. The calculations were done with the time-stepping ZEUS 3D code using massive parallelization. The alpha-Omega dynamo is known to be one of the most efficient mechanisms to reproduce the observed global galactic fields. The presence of strong turbulence is a pre-requisite for the alpha-Omega dynamo generation of the regular magnetic fields. The observed magnitude and spatial distribution of turbulence in galaxies present unsolved problems to theoreticians. The MRI is known to be a fast and powerful mechanism to generate MHD turbulence and to amplify magnetic fields. We find that the critical wavelength increases with the increasing of magnetic fields during the simulation, transporting the energy from critical to larger scales. The final structure, if not disrupted by supernovae explosions, is the structure of `thin layers' of thickness of about 100 pcs. An important outcome of all simulations is the magnitude of the horizontal components of the Reynolds and Maxwell stresses. The result is that the MRI-driven turbulence is magnetic-dominated: its magnetic energy exceeds the kinetic energy by a factor of 4. The Reynolds stress is small and less than 1% of the Maxwell stress. The angular momentum transport is thus completely dominated by the magnetic field fluctuations. The volume-averaged pitch angle is always negative with a magnitude of about -30. The non-saturated MRI regime is lasting sufficiently long to fill the time between the galactic encounters, independently of strength and geometry of the initial field. Therefore, we may claim the observed pitch angles can be due to MRI action in the gaseous galactic disks. The MRI is also shown to be a very fast instability with e-folding time proportional to the time of one rotation. Steep rotation curves imply a stronger growth for the magnetic energy due to MRI. The global e-folding time is from 44 Myr to 100 Myr depending on the rotation profile. Therefore, MRI can explain the existence of rather large magnetic field in very young galaxies. We also have reproduced the observed rms values of velocities in the interstellar turbulence as it was observed in NGC 1058. We have shown with the simulations that the averaged velocity dispersion of about 5 km/s is a typical number for the MRI-driven turbulence in galaxies, which agrees with observations. The dispersion increases outside of the disk plane, whereas supernovae-driven turbulence is found to be concentrated within the disk. In our simulations the velocity dispersion increases a few times with the heights. An additional support to the dynamo alpha-effect in the galaxies is the ability of the MRI to produce a mix of quadrupole and dipole symmetries from the purely vertical seed fields, so it also solves the seed-fields problem of the galactic dynamo theory. The interaction of magneto-rotational instability and random supernovae explosions remains an open question. It would be desirable to run the simulation with the supernovae explosions included. They would disrupt the calm ring structure produced by global MRI, may be even to the level when we can no longer blame MRI to be responsible for the turbulence.
The Thesis is focused on the properties of self-organized nanostructures. Atomic and electronic properties of different systems have been investigated using methods of electron diffraction, scanning tunneling microscopy and photoelectron spectroscopy. Implementation of the STM technique (including design, construction, and tuning of the UHV experimental set-up) has been done in the framework of present work. This time-consuming work is reported to greater detail in the experimental part of this Thesis. The scientific part starts from the study of quantum-size effects in the electronic structure of a two-dimensional Ag film on the supporting substrate Ni(111). Distinct quantum well states in the sp-band of Ag were observed in photoelectron spectra. Analysis of thickness- and angle-dependent photoemission supplies novel information on the properties of the interface. For the first time the Ni(111) relative band gap was indirectly probed in the ground-state through the electronic structure of quantum well states in the adlayer. This is particularly important for Ni where valence electrons are strongly correlated. Comparison of the experiment with calculations performed in the formalism of the extended phase accumulation model gives the substrate gap which is fully consistent with the one obtained by ab-initio LDA calculations. It is, however, in controversy to the band structure of Ni measured directly by photoemission. These results lend credit to the simplest view of photoemission from Ni, assigning early observed contradictions between theory and experiments to electron correlation effects in the final state of photoemission. Further, nanosystems of lower dimensionality have been studied. Stepped surfaces W(331) and W(551) were used as one-dimensional model systems and as templates for self-organization of Au nanoclusters. Photon energy dependent photoemission revealed a surface resonance which was never observed before on W(110) which is the base plane of the terrace microsurfaces. The dispersion E(k) of this state measured on stepped W(331) and W(551) with angle-resolved photoelectron spectroscopy is modified by a strong umklapp effect. It appears as two parabolas shifted symmetrically relative to the microsurface normal by half of the Brillouin zone of the step superlattice. The reported results are very important for understanding of the electronic properties of low-dimensional nanostructures. It was also established that W(331) and W(551) can serve as templates for self-organization of metallic nanostructures. A combined study of electronic and atomic properties of sub-monolayer amounts of gold deposited on these templates have shown that if the substrate is slightly pre-oxidized and the temperature is elevated, then Au can alloy with the first monolayer of W. As a result, a nanostructure of uniform clusters of a surface alloy is produced all over the steps. Such clusters feature a novel sp-band in the vicinity of the Fermi level, which appears split into constant energy levels due to effects of lateral quantization. The last and main part of this work is devoted to large-scale reconstructions on surfaces and nanostructures self-assembled on top. The two-dimensional surface carbide W(110)/C-R(15x3) has been extensively investigated. Photoemission studies of quantum size effects in the electronic structure of this reconstruction, combined with an investigation of its surface geometry, lead to an advanced structural model of the carbide overlayer. It was discovered that W(110)/C-R(15x3) can control self-organization of adlayers into nanostructures with extremely different electronic and structural properties. Thus, it was established that at elevated temperature the R(15x3) superstructure controls the self-assembly of sub-monolayer amounts of Au into nm-wide nanostripes. Based on the results of core level photoemission, the R(15x3)-induced surface alloying which takes place between Au and W can be claimed as driving force of self-organization. The observed stripes exhibit a characteristic one-dimensional electronic structure with laterally quantized d-bands. Obviously, these are very important for applications, since dimensions of electronic devices have already stepped into the nm-range, where quantum-size phenomena must undoubtedly be considered. Moreover, formation of perfectly uniform molecular clusters of C60 was demonstrated and described in terms of the van der Waals formalism. It is the first experimental observation of two-dimensional fullerene nanoclusters with "magic numbers". Calculations of the cluster potentials using the static approach have revealed characteristic minima in the interaction energy. They are achieved for 4 and 7 molecules per cluster. The obtained "magic numbers" and the corresponding cluster structures are fully consistent with the results of the STM measurements.
It has been known for several years that under certain conditions electrons can be confined within thin layers even if these layers consist of metal and are supported by a metal substrate. In photoelectron spectra, these layers show characteristic discrete energy levels and it has turned out that these lead to large effects like the oscillatory magnetic coupling technically exploited in modern hard disk reading heads. The current work asks in how far the concepts underlying quantization in two-dimensional films can be transferred to lower dimensionality. This problem is approached by a stepwise transition from two-dimensional layers to one-dimensional nanostructures. On the one hand, these nanostructures are represented by terraces on atomically stepped surfaces, on the other hand by atom chains which are deposited onto these terraces up to complete coverage by atomically thin nanostripes. Furthermore, self organization effects are used in order to arrive at perfectly one-dimensional atomic arrangements at surfaces. Angle-resolved photoemission is particularly suited as method of investigation because is reveals the behavior of the electrons in these nanostructures in dependence of the spacial direction which distinguishes it from, e. g., scanning tunneling microscopy. With this method intense and at times surprisingly large effects of one-dimensional quantization are observed for various exemplary systems, partly for the first time. The essential role of bandgaps in the substrate known from two-dimensional systems is confirmed for nanostructures. In addition, we reveal an ambiguity without precedent in two-dimensional layers between spacial confinement of electrons on the one side and superlattice effects on the other side as well as between effects caused by the sample and by the measurement process. The latter effects are huge and can dominate the photoelectron spectra. Finally, the effects of reduced dimensionality are studied in particular for the d electrons of manganese which are additionally affected by strong correlation effects. Surprising results are also obtained here. ---------------------------- Die Links zur jeweiligen Source der im Appendix beigefügten Veröffentlichungen befinden sich auf Seite 83 des Volltextes.
In order to investigate the temporal characteristics of cognitive processing, we apply multivariate phase synchronization analysis to event-related potentials. The experimental design combines a semantic incongruity in a sentence context with a physical mismatch (color change). In the ERP average, these result in an N400 component and a P300-like positivity, respectively. The synchronization analysis shows an effect of global desynchronization in the theta band around 288ms after stimulus presentation for the semantic incongruity, while the physical mismatch elicits an increase of global synchronization in the alpha band around 204ms. Both of these effects clearly precede those in the ERP average. Moreover, the delay between synchronization effect and ERP component correlates with the complexity of the cognitive processes.
Self-assembly of polymeric building blocks is a powerful tool for the design of novel materials and structures that combine different properties and may respond to external stimuli. In the past decades, most studies were focused on the self-assembly of amphiphilic diblock copolymers in solution. The dissolution of these block copolymers in a solvent selective for one block results mostly in the formation of micelles. The micellar structure of diblock copolymers is inherently limited to a homogeneous core surrounded by a corona, which keeps the micelle in solution. Thus, for drug-delivery applications, such structures only offer a single domain (the hydrophobic inner core) for drug entrapment. Whereas multicompartment micelles composed of a water-soluble shell and a segregated hydrophobic core are novel, interesting morphologies for applications in a variety of fields including medicine, pharmacy and biotechnology. The separated incompatible compartments of the hydrophobic core could enable the selective entrapment and release of various hydrophobic drugs while the hydrophilic shell would permit the stabilization of these nanostructures in physiological media. However, so far, the preparation and control of stable multicompartment micellar systems are in the first stages and the number of morphological studies concerning such micelles is rather low. Thus considerably little is known about their exact inner structures. In the present study, we concentrate on four different approaches for the preparation of multicompartment micelles by self-assembly in aqueous media. A similarity of all approaches was that hydrocarbon and fluorocarbon blocks were selected for all employed copolymers since such segments tend to be strongly incompatible, and thus favor the segregation into distinct domains. Our studies have shown that the self-assembly of the utilized copolymers in aqueous solution leads in three cases to the formation of multicompartment micelles. As expected the shape and size of the micelles depend on the molecular architecture and to some extent also on the way of preparation. These novel structured colloids may serve as models as well as mimics for biological structures such as globular proteins, and may open interesting opportunities for nanotechnology applications.
We present an application of imprecise probability theory to the quantification of uncertainty in the integrated assessment of climate change. Our work is motivated by the fact that uncertainty about climate change is pervasive, and therefore requires a thorough treatment in the integrated assessment process. Classical probability theory faces some severe difficulties in this respect, since it cannot capture very poor states of information in a satisfactory manner. A more general framework is provided by imprecise probability theory, which offers a similarly firm evidential and behavioural foundation, while at the same time allowing to capture more diverse states of information. An imprecise probability describes the information in terms of lower and upper bounds on probability. For the purpose of our imprecise probability analysis, we construct a diffusion ocean energy balance climate model that parameterises the global mean temperature response to secular trends in the radiative forcing in terms of climate sensitivity and effective vertical ocean heat diffusivity. We compare the model behaviour to the 20th century temperature record in order to derive a likelihood function for these two parameters and the forcing strength of anthropogenic sulphate aerosols. Results show a strong positive correlation between climate sensitivity and ocean heat diffusivity, and between climate sensitivity and absolute strength of the sulphate forcing. We identify two suitable imprecise probability classes for an efficient representation of the uncertainty about the climate model parameters and provide an algorithm to construct a belief function for the prior parameter uncertainty from a set of probability constraints that can be deduced from the literature or observational data. For the purpose of updating the prior with the likelihood function, we establish a methodological framework that allows us to perform the updating procedure efficiently for two different updating rules: Dempster's rule of conditioning and the Generalised Bayes' rule. Dempster's rule yields a posterior belief function in good qualitative agreement with previous studies that tried to constrain climate sensitivity and sulphate aerosol cooling. In contrast, we are not able to produce meaningful imprecise posterior probability bounds from the application of the Generalised Bayes' Rule. We can attribute this result mainly to our choice of representing the prior uncertainty by a belief function. We project the Dempster-updated belief function for the climate model parameters onto estimates of future global mean temperature change under several emissions scenarios for the 21st century, and several long-term stabilisation policies. Within the limitations of our analysis we find that it requires a stringent stabilisation level of around 450 ppm carbon dioxide equivalent concentration to obtain a non-negligible lower probability of limiting the warming to 2 degrees Celsius. We discuss several frameworks of decision-making under ambiguity and show that they can lead to a variety of, possibly imprecise, climate policy recommendations. We find, however, that poor states of information do not necessarily impede a useful policy advice. We conclude that imprecise probabilities constitute indeed a promising candidate for the adequate treatment of uncertainty in the integrated assessment of climate change. We have constructed prior belief functions that allow much weaker assumptions on the prior state of information than a prior probability would require and, nevertheless, can be propagated through the entire assessment process. As a caveat, the updating issue needs further investigation. Belief functions constitute only a sensible choice for the prior uncertainty representation if more restrictive updating rules than the Generalised Bayes'Rule are available.
Am Beispiel der Orgelpfeife wurde der Einfluss der Wandungsgeometrie des akustischen Wellenleiters auf die Schallabstrahlung untersucht. Für verschiedene Metalllegierungen wurden unterschiedliche Profile der Orgelpfeifenwandung verglichen: ein konisches Wandungsprofil mit zur Mündung hin abnehmender Wandungsstärke und ein paralleles Wandungsprofil mit konstanter Wandungsstärke. Für eine hohe statistische Sicherheit der Ergebnisse wurden sämtliche Untersuchungen an vier mal zehn Testpfeifen durchgeführt. Mit Ausnahme der beschriebenen Unterschiede sind die Pfeifen von gleichen Abmessungen und auf gleichen Klang intoniert. Die Überprüfung der Wandungseinflüsse auf den Klang besteht aus drei verschiedenen Untersuchungen: Erstens, einer subjektiven Hinterfragung der Wahrnehmbarkeit in einem Hörtest. Zweitens wurde der abgestrahlte Luftschall objektiv gemessen und das Spektrum der Pfeifen in seinen Komponenten (Teiltöne, Grundfrequenz) verglichen. Drittens wurde mit einer neuartigen Messtechnik die Oszillation des Pfeifenkörpers (ein einem akustischen Monopol entsprechendes "Atmen" des Querschnitts) untersucht. Die Ergebnisse belegen die Wahrnehmbarkeit unterschiedlicher Wandungsprofile als auch klare objektive Differenzen zwischen den emittierten Schallspektren. Ein Atmen mit guter Korrelation zur inneren Druckanregung bestätigt den Einfluss wandungsprofilabhängiger Oszillationen auf den Klang der Orgelpfeife. Schließlich wurde die Interaktion zweier in Abstand und Grundfrequenz nah beieinander liegender Orgelpfeifen überprüft. Als Ursache des dabei wahrnehmbaren Oktavsprung des Orgeltons konnte eine gegenphasiger Oszillation des Grundtons beider Pfeifen nachgewiesen werden.
Investigation of tropospheric arctic aerosol and mixed-phase clouds using airborne lidar technique
(2005)
An Airborne Mobile Aerosol Lidar (AMALi) was constructed and built at Alfred-Wegener-Institute for Polar and Marine Research (AWI) in Potsdam, Germany for the lower tropospheric aerosol and cloud research under tough arctic conditions. The system was successfully used during two AWI airborne field campaigns, ASTAR 2004 and SVALEX 2005, performed in vicinity of Spitsbergen in the Arctic. The novel evaluation schemes, the Two-Stream Inversion and the Iterative Airborne Inversion, were applied to the obtained lidar data. Thereby, calculation of the particle extinction and backscatter coefficient profiles with corresponding lidar ratio profiles characteristic for the arctic air was possible. The comparison of these lidar results with the results of other in-situ and remote instrumentation (ground based Koldewey Aerosol Raman Lidar (KARL), sunphotometer, radiosounding, satellite imagery) allowed to provided clean contra polluted (Arctic Haze) characteristics of the arctic aerosols. Moreover, the data interpretation by means of the ECMWF Operational Analyses and small-scale dispersion model EULAG allowed studying the effects of the Spitsbergens orography on the aerosol load in the Planetary Boundary Layer. With respect to the cloud studies a new methodology of alternated remote AMALi measurements with the airborne in-situ cloud optical and microphysical parameters measurements was proved feasible for the low density mixed-phase cloud studies. An example of such approach during observation of the natural cloud seeding (feeder-seeder phenomenon) with ice crystals precipitating into the lower supercooled stratocumulus deck were discussed in terms of the lidar signal intensity profiles and corresponding depolarisation ratio profiles. For parts of the cloud system characterised by almost negligible multiple scattering the calculation of the particle backscatter coefficient profiles was possible using the lidar ratio information obtained from the in-situ measurements in ice-crystal cloud and water cloud.
The layer-by-layer assembly (LBL) of polyelectrolytes has been extensively studied for the preparation of ultrathin films due to the versatility of the build-up process. The control of the permeability of these layers is particularly important as there are potential drug delivery applications. Multilayered polyelectrolyte microcapsules are also of great interest due to their possible use as microcontainers. This work will present two methods that can be used as employable drug delivery systems, both of which can encapsulate an active molecule and tune the release properties of the active species. Poly-(N-isopropyl acrylamide), (PNIPAM) is known to be a thermo-sensitive polymer that has a Lower Critical Solution Temperature (LCST) around 32oC; above this temperature PNIPAM is insoluble in water and collapses. It is also known that with the addition of salt, the LCST decreases. This work shows Differential Scanning Calorimetry (DSC) and Confocal Laser Scanning Microscopy (CLSM) evidence that the LCST of the PNIPAM can be tuned with salt type and concentration. Microcapsules were used to encapsulate this thermo-sensitive polymer, resulting in a reversible and tunable stimuli- responsive system. The encapsulation of the PNIPAM inside of the capsule was proven with Raman spectroscopy, DSC (bulk LCST measurements), AFM (thickness change), SEM (morphology change) and CLSM (in situ LCST measurement inside of the capsules). The exploitation of the capsules as a microcontainer is advantageous not only because of the protection the capsules give to the active molecules, but also because it facilitates easier transport. The second system investigated demonstrates the ability to reduce the permeability of polyelectrolyte multilayer films by the addition of charged wax particles. The incorporation of this hydrophobic coating leads to a reduced water sensitivity particularly after heating, which melts the wax, forming a barrier layer. This conclusion was proven with Neutron Reflectivity by showing the decreased presence of D2O in planar polyelectrolyte films after annealing creating a barrier layer. The permeability of capsules could also be decreased by the addition of a wax layer. This was proved by the increase in recovery time measured by Florescence Recovery After Photobleaching, (FRAP) measurements. In general two advanced methods, potentially suitable for drug delivery systems, have been proposed. In both cases, if biocompatible elements are used to fabricate the capsule wall, these systems provide a stable method of encapsulating active molecules. Stable encapsulation coupled with the ability to tune the wall thickness gives the ability to control the release profile of the molecule of interest.
Uncertainty about the sensitivity of the climate system to changes in the Earth’s radiative balance constitutes a primary source of uncertainty for climate projections. Given the continuous increase in atmospheric greenhouse gas concentrations, constraining the uncertainty range in such type of sensitivity is of vital importance. A common measure for expressing this key characteristic for climate models is the climate sensitivity, defined as the simulated change in global-mean equilibrium temperature resulting from a doubling of atmospheric CO2 concentration. The broad range of climate sensitivity estimates (1.5-4.5°C as given in the last Assessment Report of the Intergovernmental Panel on Climate Change, 2001), inferred from comprehensive climate models, illustrates that the strength of simulated feedback mechanisms varies strongly among different models. The central goal of this thesis is to constrain uncertainty in climate sensitivity. For this objective we first generate a large ensemble of model simulations, covering different feedback strengths, and then request their consistency with present-day observational data and proxy-data from the Last Glacial Maximum (LGM). Our analyses are based on an ensemble of fully-coupled simulations, that were realized with a climate model of intermediate complexity (CLIMBER-2). These model versions cover a broad range of different climate sensitivities, ranging from 1.3 to 5.5°C, and have been generated by simultaneously perturbing a set of 11 model parameters. The analysis of the simulated model feedbacks reveals that the spread in climate sensitivity results from different realizations of the feedback strengths in water vapour, clouds, lapse rate and albedo. The calculated spread in the sum of all feedbacks spans almost the entire plausible range inferred from a sampling of more complex models. We show that the requirement for consistency between simulated pre-industrial climate and a set of seven global-mean data constraints represents a comparatively weak test for model sensitivity (the data constrain climate sensitivity to 1.3-4.9°C). Analyses of the simulated latitudinal profile and of the seasonal cycle suggest that additional present-day data constraints, based on these characteristics, do not further constrain uncertainty in climate sensitivity. The novel approach presented in this thesis consists in systematically combining a large set of LGM simulations with data information from reconstructed regional glacial cooling. Irrespective of uncertainties in model parameters and feedback strengths, the set of our model versions reveals a close link between the simulated warming due to a doubling of CO2, and the cooling obtained for the LGM. Based on this close relationship between past and future temperature evolution, we define a method (based on linear regression) that allows us to estimate robust 5-95% quantiles for climate sensitivity. We thus constrain the range of climate sensitivity to 1.3-3.5°C using proxy-data from the LGM at low and high latitudes. Uncertainties in glacial radiative forcing enlarge this estimate to 1.2-4.3°C, whereas the assumption of large structural uncertainties may increase the upper limit by an additional degree. Using proxy-based data constraints for tropical and Antarctic cooling we show that very different absolute temperature changes in high and low latitudes all yield very similar estimates of climate sensitivity. On the whole, this thesis highlights that LGM proxy-data information can offer an effective means of constraining the uncertainty range in climate sensitivity and thus underlines the potential of paleo-climatic data to reduce uncertainty in future climate projections.
Stars are born in turbulent molecular clouds that fragment and collapse under the influence of their own gravity, forming a cluster of hundred or more stars. The star formation process is controlled by the interplay between supersonic turbulence and gravity. In this work, the properties of stellar clusters created by numerical simulations of gravoturbulent fragmentation are compared to those from observations. This includes the analysis of properties of individual protostars as well as statistical properties of the entire cluster. It is demonstrated that protostellar mass accretion is a highly dynamical and time-variant process. The peak accretion rate is reached shortly after the formation of the protostellar core. It is about one order of magnitude higher than the constant accretion rate predicted by the collapse of a classical singular isothermal sphere, in agreement with the observations. For a more reasonable comparison, the model accretion rates are converted to the observables bolometric temperature, bolometric luminosity, and envelope mass. The accretion rates from the simulations are used as input for an evolutionary scheme. The resulting distribution in the Tbol-Lbol-Menv parameter space is then compared to observational data by means of a 3D Kolmogorov-Smirnov test. The highest probability found that the distributions of model tracks and observational data points are drawn from the same population is 70%. The ratios of objects belonging to different evolutionary classes in observed star-forming clusters are compared to the temporal evolution of the gravoturbulent models in order to estimate the evolutionary stage of a cluster. While it is difficult to estimate absolute ages, the realtive numbers of young stars reveal the evolutionary status of a cluster with respect to other clusters. The sequence shows Serpens as the youngest and IC 348 as the most evolved of the investigated clusters. Finally the structures of young star clusters are investigated by applying different statistical methods like the normalised mean correlation length and the minimum spanning tree technique and by a newly defined measure for the cluster elongation. The clustering parameters of the model clusters correspond in many cases well to those from observed ones. The temporal evolution of the clustering parameters shows that the star cluster builds up from several subclusters and evolves to a more centrally concentrated cluster, while the cluster expands slower than new stars are formed.
Interdisziplinäres Zentrum für Musterdynamik und Angewandte Fernerkundung Workshop vom 9. - 10. Februar 2006
The separation of natural and anthropogenically caused climatic changes is an important task of contemporary climate research. For this purpose, a detailed knowledge of the natural variability of the climate during warm stages is a necessary prerequisite. Beside model simulations and historical documents, this knowledge is mostly derived from analyses of so-called climatic proxy data like tree rings or sediment as well as ice cores. In order to be able to appropriately interpret such sources of palaeoclimatic information, suitable approaches of statistical modelling as well as methods of time series analysis are necessary, which are applicable to short, noisy, and non-stationary uni- and multivariate data sets. Correlations between different climatic proxy data within one or more climatological archives contain significant information about the climatic change on longer time scales. Based on an appropriate statistical decomposition of such multivariate time series, one may estimate dimensions in terms of the number of significant, linear independent components of the considered data set. In the presented work, a corresponding approach is introduced, critically discussed, and extended with respect to the analysis of palaeoclimatic time series. Temporal variations of the resulting measures allow to derive information about climatic changes. For an example of trace element abundances and grain-size distributions obtained near the Cape Roberts (Eastern Antarctica), it is shown that the variability of the dimensions of the investigated data sets clearly correlates with the Oligocene/Miocene transition about 24 million years before present as well as regional deglaciation events. Grain-size distributions in sediments give information about the predominance of different transportation as well as deposition mechanisms. Finite mixture models may be used to approximate the corresponding distribution functions appropriately. In order to give a complete description of the statistical uncertainty of the parameter estimates in such models, the concept of asymptotic uncertainty distributions is introduced. The relationship with the mutual component overlap as well as with the information missing due to grouping and truncation of the measured data is discussed for a particular geological example. An analysis of a sequence of grain-size distributions obtained in Lake Baikal reveals that there are certain problems accompanying the application of finite mixture models, which cause an extended climatological interpretation of the results to fail. As an appropriate alternative, a linear principal component analysis is used to decompose the data set into suitable fractions whose temporal variability correlates well with the variations of the average solar insolation on millenial to multi-millenial time scales. The abundance of coarse-grained material is obviously related to the annual snow cover, whereas a significant fraction of fine-grained sediments is likely transported from the Taklamakan desert via dust storms in the spring season.
Since their discovery in 1610 by Galileo Galilei, Saturn's rings continue to fascinate both experts and amateurs. Countless numbers of icy grains in almost Keplerian orbits reveal a wealth of structures such as ringlets, voids and gaps, wakes and waves, and many more. Grains are found to increase in size with increasing radial distance to Saturn. Recently discovered "propeller" structures in the Cassini spacecraft data, provide evidence for the existence of embedded moonlets. In the wake of these findings, the discussion resumes about origin and evolution of planetary rings, and growth processes in tidal environments. In this thesis, a contact model for binary adhesive, viscoelastic collisions is developed that accounts for agglomeration as well as restitution. Collisional outcomes are crucially determined by the impact speed and masses of the collision partners and yield a maximal impact velocity at which agglomeration still occurs. Based on the latter, a self-consistent kinetic concept is proposed. The model considers all possible collisional outcomes as there are coagulation, restitution, and fragmentation. Emphasizing the evolution of the mass spectrum and furthermore concentrating on coagulation alone, a coagulation equation, including a restricted sticking probability is derived. The otherwise phenomenological Smoluchowski equation is reproduced from basic principles and denotes a limit case to the derived coagulation equation. Qualitative and quantitative analysis of the relevance of adhesion to force-free granular gases and to those under the influence of Keplerian shear is investigated. Capture probability, agglomerate stability, and the mass spectrum evolution are investigated in the context of adhesive interactions. A size dependent radial limit distance from the central planet is obtained refining the Roche criterion. Furthermore, capture probability in the presence of adhesion is generally different compared to the case of pure gravitational capture. In contrast to a Smoluchowski-type evolution of the mass spectrum, numerical simulations of the obtained coagulation equation revealed, that a transition from smaller grains to larger bodies cannot occur via a collisional cascade alone. For parameters used in this study, effective growth ceases at an average size of centimeters.
When Galactic microlensing events of stars are observed, one usually measures a symmetric light curve corresponding to a single lens, or an asymmetric light curve, often with caustic crossings, in the case of a binary lens system. In principle, the fraction of binary stars at a certain separation range can be estimated based on the number of measured microlensing events. However, a binary system may produce a light curve which can be fitted well as a single lens light curve, in particullary if the data sampling is poor and the errorbars are large. We investigate what fraction of microlensing events produced by binary stars for different separations may be well fitted by and hence misinterpreted as single lens events for various observational conditions. We find that this fraction strongly depends on the separation of the binary components, reaching its minimum at between 0.6 and 1.0 Einstein radius, where it is still of the order of 5% The Einstein radius is corresponding to few A.U. for typical Galactic microlensing scenarios. The rate for misinterpretation is higher for short microlensing events lasting up to few months and events with smaller maximum amplification. For fixed separation it increases for binaries with more extreme mass ratios. Problem of degeneracy in photometric light curve solution between binary lens and binary source microlensing events was studied on simulated data, and data observed by the PLANET collaboration. The fitting code BISCO using the PIKAIA genetic algorithm optimizing routine was written for optimizing binary-source microlensing light curves observed at different sites, in I, R and V photometric bands. Tests on simulated microlensing light curves show that BISCO is successful in finding the solution to a binary-source event in a very wide parameter space. Flux ratio method is suggested in this work for breaking degeneracy between binary-lens and binary-source photometric light curves. Models show that only a few additional data points in photometric V band, together with a full light curve in I band, will enable breaking the degeneracy. Very good data quality and dense data sampling, combined with accurate binary lens and binary source modeling, yielded the discovery of the lowest-mass planet discovered outside of the Solar System so far, OGLE-2005-BLG-390Lb, having only 5.5 Earth masses. This was the first observed microlensing event in which the degeneracy between a planetary binary-lens and an extreme flux ratio binary-source model has been successfully broken. For events OGLE-2003-BLG-222 and OGLE-2004-BLG-347, the degeneracy was encountered despite of very dense data sampling. From light curve modeling and stellar evolution theory, there was a slight preference to explain OGLE-2003-BLG-222 as a binary source event, and OGLE-2004-BLG-347 as a binary lens event. However, without spectra, this degeneracy cannot be fully broken. No planet was found so far around a white dwarf, though it is believed that Jovian planets should survive the late stages of stellar evolution, and that white dwarfs will retain planetary systems in wide orbits. We want to perform high precision astrometric observations of nearby white dwarfs in wide binary systems with red dwarfs in order to find planets around white dwarfs. We selected a sample of observing targets (WD-RD binary systems, not published yet), which can possibly have planets around the WD component, and modeled synthetic astrometric orbits which can be observed for these targets using existing and future astrometric facilities. Modeling was performed for the astrometric accuracy of 0.01, 0.1, and 1.0 mas, separation between WD and planet of 3 and 5 A.U., binary system separation of 30 A.U., planet masses of 10 Earth masses, 1 and 10 Jupiter masses, WD mass of 0.5M and 1.0 Solar masses, and distances to the system of 10, 20 and 30 pc. It was found that the PRIMA facility at the VLTI will be able to detect planets around white dwarfs once it is operating, by measuring the astrometric wobble of the WD due to a planet companion, down to 1 Jupiter mass. We show for the simulated observations that it is possible to model the orbits and find the parameters describing the potential planetary systems.
I perform and analyse the first ever calculations of rotating stellar iron core collapse in {3+1} general relativity that start out with presupernova models from stellar evolutionary calculations and include a microphysical finite-temperature nuclear equation of state, an approximate scheme for electron capture during collapse and neutrino pressure effects. Based on the results of these calculations, I obtain the to-date most realistic estimates for the gravitational wave signal from collapse, bounce and the early postbounce phase of core collapse supernovae. I supplement my {3+1} GR hydrodynamic simulations with 2D Newtonian neutrino radiation-hydrodynamic supernova calculations focussing on (1) the late postbounce gravitational wave emission owing to convective overturn, anisotropic neutrino emission and protoneutron star pulsations, and (2) on the gravitational wave signature of accretion-induced collapse of white dwarfs to neutron stars.
Variationen der stratosphärischen Residualzirkulation und ihr Einfluss auf die Ozonverteilung
(2006)
Die Residualzirkulation entspricht der mittleren Massenzirkulation und beschreibt die im zonalen Mittel stattfindenden meridionalen Transportprozesse. Die Variationen der Residualzirkulation bestimmen gemeinsam mit dem anthropogen verursachten Ozonabbau die jährlichen Schwankungen der Ozongesamtsäule im arktischen Frühling. In der vorliegenden Arbeit wird die Geschwindigkeit des arktischen Astes der Residualzirkulation aus atmosphärischen Daten gewonnen. Zu diesem Zweck wird das diabatische Absinken im Polarwirbel mit Hilfe von Trajektorienrechnungen bestimmt. Die vertikalen Bewegungen der Luftpakete können mit vertikalen Windfeldern oder entsprechend einem neuen Ansatz mit diabatischen Heizraten angetrieben werden. Die Eingabedaten stammen aus dem 45 Jahre langen Reanalyse-Datensatz des "European Centre for Medium Range Weather Forecast" (ECMWF). Außerdem kann für die Jahre ab 1984 die operationelle ECMWF-Analyse verwendet werden. Die Qualität und Robustheit der Heizraten- und Trajektorienrechnungen werden durch Sensitivitätsstudien und Vergleiche mit anderen Modellen untermauert. Anschließend werden umfangreiche Trajektorienensemble statistisch ausgewertet, um ein detailliertes, zeit- und höhenaufgelöstes Bild des diabatischen Absinkens zu ermitteln. In diesem Zusammenhang werden zwei Methoden entwickelt, um das Absinken gemittelt im Polarwirbel oder als Funktion der äquivalenten Breite zu bestimmen. Es wird gezeigt, dass es notwendig ist den Lagrangeschen auf Trajektorienrechnungen basierenden Ansatz zu verfolgen, da die einfachen Eulerschen Mittel Abweichungen zu den Lagrangeschen Vertikalgeschwindigkeiten aufweisen. Das wirbelgemittelte Absinken wird für einzelne Winter mit dem beobachteten Absinken langlebiger Spurengase und anderen Modellstudien verglichen. Der Vergleich zeigt, dass das Absinken basierend auf den vertikalen Windfeldern der ECMWF-Datensätze den Nettoluftmassentransport durch die Residualzirkulation sehr stark überschätzt. Der neue Ansatz basierend auf den Heizraten ergibt hingegen realistische Ergebnisse und wird aus diesem Grund für alle Rechnungen verwendet. Es wird erstmalig eine Klimatologie des diabatischen Absinkens über einen fast fünf Jahrzehnte umfassenden Zeitraum erstellt. Die Klimatologie beinhaltet das vertikal und zeitlich aufgelöste diabatische Absinken gemittelt über den gesamten Polarwirbel und Informationen über die räumliche Struktur des vertikalen Absinkens. Die natürliche Jahr-zu-Jahr Variabilität des diabatischen Absinkens ist sehr stark ausgeprägt. Es wird gezeigt, dass zwischen der ECMWF-Zeitreihe des diabatischen Absinkens und der Zeitreihe aus einem unabhängig analysierten Temperaturdatensatz hohe Korrelationen bestehen. Erstmals wird der Einfluss von Transportprozessen auf die Ozongesamtsäule im arktischen Frühling direkt quantifiziert. Es wird gezeigt, dass die Jahr-zu-Jahr Variabilität der Ozongesamtsäule im arktischen Frühling zu gleichen Anteilen durch die Variabilität der dynamischen Komponente und durch die Variabilität der chemischen Komponente beeinflusst wird. Die gefundenen Variabilitäten von diabatischem Absinken und Ozoneintrag in hohen Breiten werden mit der vertikalen Ausbreitung planetarer Wellen aus der Troposphäre in die Stratosphäre in Beziehung gesetzt.
What can we learn from climate data? : Methods for fluctuation, time/scale and phase analysis
(2006)
Since Galileo Galilei invented the first thermometer, researchers have tried to understand the complex dynamics of ocean and atmosphere by means of scientific methods. They observe nature and formulate theories about the climate system. Since some decades powerful computers are capable to simulate the past and future evolution of climate. Time series analysis tries to link the observed data to the computer models: Using statistical methods, one estimates characteristic properties of the underlying climatological processes that in turn can enter the models. The quality of an estimation is evaluated by means of error bars and significance testing. On the one hand, such a test should be capable to detect interesting features, i.e. be sensitive. On the other hand, it should be robust and sort out false positive results, i.e. be specific. This thesis mainly aims to contribute to methodological questions of time series analysis with a focus on sensitivity and specificity and to apply the investigated methods to recent climatological problems. First, the inference of long-range correlations by means of Detrended Fluctuation Analysis (DFA) is studied. It is argued that power-law scaling of the fluctuation function and thus long-memory may not be assumed a priori but have to be established. This requires to investigate the local slopes of the fluctuation function. The variability characteristic for stochastic processes is accounted for by calculating empirical confidence regions. The comparison of a long-memory with a short-memory model shows that the inference of long-range correlations from a finite amount of data by means of DFA is not specific. When aiming to infer short memory by means of DFA, a local slope larger than $\alpha=0.5$ for large scales does not necessarily imply long-memory. Also, a finite scaling of the autocorrelation function is shifted to larger scales in the fluctuation function. It turns out that long-range correlations cannot be concluded unambiguously from the DFA results for the Prague temperature data set. In the second part of the thesis, an equivalence class of nonstationary Gaussian stochastic processes is defined in the wavelet domain. These processes are characterized by means of wavelet multipliers and exhibit well defined time dependent spectral properties; they allow one to generate realizations of any nonstationary Gaussian process. The dependency of the realizations on the wavelets used for the generation is studied, bias and variance of the wavelet sample spectrum are calculated. To overcome the difficulties of multiple testing, an areawise significance test is developed and compared to the conventional pointwise test in terms of sensitivity and specificity. Applications to Climatological and Hydrological questions are presented. The thesis at hand mainly aims to contribute to methodological questions of time series analysis and to apply the investigated methods to recent climatological problems. In the last part, the coupling between El Nino/Southern Oscillation (ENSO) and the Indian Monsoon on inter-annual time scales is studied by means of Hilbert transformation and a curvature defined phase. This method allows one to investigate the relation of two oscillating systems with respect to their phases, independently of their amplitudes. The performance of the technique is evaluated using a toy model. From the data, distinct epochs are identified, especially two intervals of phase coherence, 1886-1908 and 1964-1980, confirming earlier findings from a new point of view. A significance test of high specificity corroborates these results. Also so far unknown periods of coupling invisible to linear methods are detected. These findings suggest that the decreasing correlation during the last decades might be partly inherent to the ENSO/Monsoon system. Finally, a possible interpretation of how volcanic radiative forcing could cause the coupling is outlined.
The primary objective of this work was to develop a laser source for fundamental investigations in the field of laser – materials interactions. In particular it is supposed to facilitate the study of the influence of the temporal energy distribution such as the interaction between adjacent pulses on ablation processes. Therefore, the aim was to design a laser with a highly flexible and easily controllable temporal energy distribution. The laser to meet these demands is an SBS-laser with optional active mode-locking. The nonlinear reflectivity of the SBS-mirror leads to a passive Q-switching and issues ns-pulse bursts with µs spacing. The pulse train parameters such as pulse duration, pulse spacing, pulse energy and number of pulses within a burst can be individually adjusted by tuning the pump parameters and the starting conditions for the laser. Another feature of the SBS-reflection is phase conjugation, which leads to an excellent beam quality thanks to the compensation of phase distortions. Transverse fundamental mode operation and a beam quality better than 1.4 times diffraction limited can be maintained for average output powers of up to 10 W. In addition to the dynamics on a ns-timescale described above, a defined splitting up of each ns-pulse into a train of ps-pulses can be achieved by additional active mode-locking. This twofold temporal focussing of the intensity leads to single pulse energies of up to 2 mJ at pulse durations of approximately 400 ps which corresponds to a pulse peak power of 5 MW. While the pulse duration is of the same order of magnitude as those of other passively Q-switched lasers with simultaneous mode-locking, the pulse energy and pulse peak power exceeds the values of these systems found in the literature by an order of magnitude. To the best of my knowledge the laser presented here is the first implementation of a self-starting mode-locked SBS-laser oscillator. In order to gain a better understanding and control of the transient output of the laser two complementary numerical models were developed. The first is based on laser rate equations which are solved for each laser mode individually while the mode-locking dynamics are calculated from the resultant transient spectrum. The rate equations consider the mean photon densities in the resonator, therefore the propagation of the light inside the resonator is not properly displayed. The second model, in contrast, introduces a spatial resolution of the resonator and hence the propagation inside the resonator can more accurately be considered. Consequently, a mismatch between the loss modulation frequency and the resonator round trip time can be conceived. The model calculates all dynamics in the time domain and therefore the spectral influences such as the Stokes-shift have to be neglected. Both models achieve an excellent reproduction of the ns-dynamics that are generated by the SBS-Q-switch. Separately, each model fails to reproduce all aspects of the ps-dynamics of the SBS-laser in detail. This can be attributed to the complexity of the numerous physical processes involved in this system. But thanks to their complementary nature they provide a very useful tool for investigating the various influences on the dynamics of the mode-locked SBS-laser individually. These aspects can eventually be recomposed to give a complete picture of the mechanisms which govern the output dynamics. Among the aspects under scrutiny were in particular the start resonator quality which determines the starting condition for the SBS-Q-switch, the modulation depth of the AOM and the phonon lifetime as well as the Brillouin-frequency of the SBS-medium. The numerical simulations and the experiments have opened several doors inviting further investigations and promising a potential for further improvement of the experimental results: The results of the simulations in combination with the experimental results which determined the starting conditions for the simulations leave no doubt that the bandwidth generation can primarily be attributed to the SBS-Stokes-shift during the buildup of the Q-switch pulse. For each resonator round trip, bandwidth is generated by shifting a part of the revolving light in frequency. The magnitude of the frequency shift corresponds to the Brillouin-frequency which is a constant of the SBS material and amounts in the case of SF6 to 240 MHz. The modulation of the AOM merely provides an exchange of population between spectrally adjacent modes and therefore diminishes a modulation in the spectrum. By use of a material with a Brillouin-frequency in the GHz range the bandwidth generation can be considerably accelerated thereby shortening the pulse duration. Also, it was demonstrated that yet another nonlinear effect of the SBS can be exploited: If the phonon lifetime is short compared to the resonator round trip time we obtain a modulation in the SBS-reflectivity that supports the modulation of the AOM. The application of an external optical feedback by a conventional mirror turns out to be an alternative to the AOM in synchronizing the longitudinal resonator modes. The interesting feature about this system is that it is ― although highly complex in the physical processes and the temporal output dynamics ― very simple and inexpensive from a technical point of view. No expensive modulators and no control electronics are necessary. Finally, the numerical models constitute a powerful tool for the investigation of emission dynamics of complex laser systems on arbitrary timescales and can also display the spectral evolution of the laser output. In particular it could be demonstrated that differences in the results of the complementary models vanish for systems of lesser complexity.
This thesis studies strong, completely charged polyelectrolyte brushes. Extensive molecular dynamics simulations are performed on different polyelectrolyte brush systems using local compute servers and massively parallel supercomputers. The full Coulomb interaction of charged monomers, counterions, and salt ions is treated explicitly. The polymer chains are anchored by one of their ends to a uncharged planar surface. The chains are treated under good solvent conditions. Monovalent salt ions (1:1 type) are modelled same as counterions. The studies concentrate on three different brush systems at constant temperature and moderate Coulomb interaction strength (Bjerrum length equal to bond length): The first system consists of a single polyelectrolyte brush anchored with varying grafting density to a plane. Results show that chains are extended up to about 2/3 of their contour length. The brush thickness slightly grows with increasing anchoring density. This slight dependence of the brush height on grafting density is in contrast to the well known scaling result for the osmotic brush regime. That is why the result obtained by simulations has stimulated further development of theory as well as new experimental investigations on polyelectrolyte brushes. This observation can be understood on a semi-quantitative level using a simple scaling model that incorporates excluded volume effects in a free-volume formulation where an effective cross section is assigned to the polymer chain from where couterions are excluded. The resulting regime is called nonlinear osmotic brush regime. Recently this regime was also obtained in experiments. The second system studied consists of polyelectrolyte brushes with added salt in the nonlinear osmotic regime. Varying salt is an important parameter to tune the structure and properties of polyelectrolytes. Further motivation is due to a theoretical scaling prediction by Pincus for the salt dependence of brush thickness. In the high salt limit (salt concentration much larger than counterion concentration) the brush height is predicted to decrease with increasing external salt, but with a relatively weak power law showing an exponent -1/3. There is some experimental and theoretical work that confirms this prediction, but there are other results that are in contradiction. In such a situation simulations are performed to validate the theoretical prediction. The simulation result shows that brush thickness decreases with added salt, and indeed is in quite good agreement with the scaling prediction by Pincus. The relation between buffer concentration and the effective ion strength inside the brush at varying salt concentration is of interest both from theoretical as well as experimental point of view. The simulation result shows that mobile ions (counterions as well as salt) distribute nonhomogeneously inside and outside of the brush. To explain the relation between the internal ion concentration with the buffer concentration a Donnan equilibrium approach is employed. Modifying the Donnan approach by taking into account the self-volume of polyelectrolyte chains as indicated above, the simulation result can be explained using the same effective cross section for the polymer chains. The extended Donnan equilibrium relation represents a interesting theoretical prediction that should be checked by experimental data. The third system consist of two interacting polyelectrolyte brushes that are grafted to two parallel surfaces. The interactions between brushes are important, for instance, in stabilization of dispersions against flocculation. In the simulations pressure is evaluated as a function of separation D between the two grafting planes. The pressure behavior shows different regimes for decreasing separation. This behavior is in qualitative agreement with experimental data. At relatively weak compression the pressure behavior obtained in the simulation agrees with a 1/D power law predicted by scaling theory. Beyond that the present study could supply new insight for understanding the interaction between polyelectrolyte brushes.
<img src="http://vg00.met.vgwort.de/na/806c85cec18906a64e06" width="1" height="1" alt=""> Subject of this work is the possibility to synchronize nonlinear systems via correlated noise and automatic control. The thesis is divided into two parts. The first part is motivated by field studies on feral sheep populations on two islands of the St. Kilda archipelago, which revealed strong correlations due to environmental noise. For a linear system the population correlation equals the noise correlation (Moran effect). But there exists no systematic examination of the properties of nonlinear maps under the influence of correlated noise. Therefore, in the first part of this thesis the noise-induced correlation of logistic maps is systematically examined. For small noise intensities it can be shown analytically that the correlation of quadratic maps in the fixed-point regime is always smaller than or equal to the noise correlation. In the period-2 regime a Markov model explains qualitatively the main dynamical characteristics. Furthermore, two different mechanisms are introduced which lead to a higher correlation of the systems than the environmental correlation. The new effect of "correlation resonance" is described, i. e. the correlation yields a maximum depending on the noise intensity. In the second part of the thesis an automatic control method is presented which synchronizes different systems in a robust way. This method is inspired by phase-locked loops and is based on a feedback loop with a differential control scheme, which allows to change the phases of the controlled systems. The effectiveness of the approach is demonstrated for controlled phase synchronization of regular oscillators and foodweb models.
This Thesis was devoted to the study of the coupled system composed by El Niño/Southern Oscillation and the Annual Cycle. More precisely, the work was focused on two main problems: 1. How to separate both oscillations into an affordable model for understanding the behaviour of the whole system. 2. How to model the system in order to achieve a better understanding of the interaction, as well as to predict future states of the system. We focused our efforts in the Sea Surface Temperature equations, considering that atmospheric effects were secondary to the ocean dynamics. The results found may be summarised as follows: 1. Linear methods are not suitable for characterising the dimensionality of the sea surface temperature in the tropical Pacific Ocean. Therefore they do not help to separate the oscillations by themselves. Instead, nonlinear methods of dimensionality reduction are proven to be better in defining a lower limit for the dimensionality of the system as well as in explaining the statistical results in a more physical way [1]. In particular, Isomap, a nonlinear modification of Multidimensional Scaling methods, provides a physically appealing method of decomposing the data, as it substitutes the euclidean distances in the manifold by an approximation of the geodesic distances. We expect that this method could be successfully applied to other oscillatory extended systems and, in particular, to meteorological systems. 2. A three dimensional dynamical system could be modeled, using a backfitting algorithm, for describing the dynamics of the sea surface temperature in the tropical Pacific Ocean. We observed that, although there were few data points available, we could predict future behaviours of the coupled ENSO-Annual Cycle system with an accuracy of less than six months, although the constructed system presented several drawbacks: few data points to input in the backfitting algorithm, untrained model, lack of forcing with external data and simplification using a close system. Anyway, ensemble prediction techniques showed that the prediction skills of the three dimensional time series were as good as those found in much more complex models. This suggests that the climatological system in the tropics is mainly explained by ocean dynamics, while the atmosphere plays a secondary role in the physics of the process. Relevant predictions for short lead times can be made using a low dimensional system, despite its simplicity. The analysis of the SST data suggests that nonlinear interaction between the oscillations is small, and that noise plays a secondary role in the fundamental dynamics of the oscillations [2]. A global view of the work shows a general procedure to face modeling of climatological systems. First, we should find a suitable method of either linear or nonlinear dimensionality reduction. Then, low dimensional time series could be extracted out of the method applied. Finally, a low dimensional model could be found using a backfitting algorithm in order to predict future states of the system.
In this work the first observation of new type of liquid crystals is presented. This is ionic self-assembly (ISA) liquid crystals formed by introduction of oppositely charged ions between different low molecular tectonic units. As practically all conventional liquid crystals consist of rigid core and alkyl chains the attention is focused to the simplest case where oppositely charged ions are placed between a rigid core and alkyl tails. The aim of this work is to investigate and understand liquid crystalline and alignment properties of these materials. It was found that ionic interactions within complexes play the main role. Presence of these interactions restricts transition to isotropic phase. In addition, these interactions hold the system (like network) allowing crystallization into a single domain from aligned LC state. Alignment of these simple ISA complexes was spontaneous on a glass substrate. In order to show potentials for application perylenediimide and azobenzene containing ISA complexes have been investigated for correlations between phase behavior and their alignment properties. The best results of macroscopic alignment of perylenediimide-based ISA complexes have been obtained by zone-casting method. In the aligned films the columns of the complex align perpendicular to the phase-transition front. The obtained anisotropy (DR = 18) is thermally stable. The investigated photosensitive (azobenzene-based) ISA complexes show formation of columnar LC phases. It was demonstrated that photo alignment of such complexes was very effective (DR = 50 has been obtained). It was shown that photo-reorientation in the photosensitive ISA complexes is cooperative process. The size of domains has direct influence on efficiency of the photo-reorientation process. In the case of small domains the photo-alignment is the most effective. Under irradiation with linearly polarized light domains reorient in the plane of the film leading to macroscopic alignment of columns parallel to the light polarization and joining of small domains into big ones. Finally, the additional distinguishable properties of the ISA liquid crystalline complexes should be noted: (I) the complexes do not solve in water but readily solve in organic solvents; (II) the complexes have good film-forming properties when cast or spin-coated from organic solvent; (III) alignment of the complexes depends on their structure and secondary interactions between tectonic units.
In Allefeld & Kurths [2004], we introduced an approach to multivariate phase synchronization analysis in the form of a Synchronization Cluster Analysis (SCA). A statistical model of a synchronization cluster was described, and an abbreviated instruction on how to apply this model to empirical data was given, while an implementation of the corresponding algorithm was (and is) available from the authors. In this letter, the complete details on how the data analysis algorithm is to be derived from the model are filled in.
In this paper we present an approach to recover the dynamics from recurrences of a system and then generate (multivariate) twin surrogate (TS) trajectories. In contrast to other approaches, such as the linear-like surrogates, this technique produces surrogates which correspond to an independent copy of the underlying system, i. e. they induce a trajectory of the underlying system visiting the attractor in a different way. We show that these surrogates are well suited to test for complex synchronization, which makes it possible to systematically assess the reliability of synchronization analyses. We then apply the TS to study binocular fixational movements and find strong indications that the fixational movements of the left and right eye are phase synchronized. This result indicates that there might be one centre only in the brain that produces the fixational movements in both eyes or a close link between two centres.
We present an approach to generate (multivariate) twin surrogates (TS) based on recurrence properties. This technique generates surrogates which correspond to an independent copy of the underlying system, i. e. they induce a trajectory of the underlying system starting at different initial conditions. We show that these surrogates are well suited to test for complex synchronisation and exemplify this for the paradigmatic system of R¨ossler oscillators. The proposed test enables to assess the statistical relevance of a synchronisation analysis from passive experiments which are typical in natural systems.
Uncertainties are pervasive in the Earth System modelling. This is not just due to a lack of knowledge about physical processes but has its seeds in intrinsic, i.e. inevitable and irreducible, uncertainties concerning the process of modelling as well. Therefore, it is indispensable to quantify uncertainty in order to determine, which are robust results under this inherent uncertainty. The central goal of this thesis is to explore how uncertainties map on the properties of interest such as phase space topology and qualitative dynamics of the system. We will address several types of uncertainty and apply methods of dynamical systems theory on a trendsetting field of climate research, i.e. the Indian monsoon. For the systematic analysis concerning the different facets of uncertainty, a box model of the Indian monsoon is investigated, which shows a saddle node bifurcation against those parameters that influence the heat budget of the system and that goes along with a regime shift from a wet to a dry summer monsoon. As some of these parameters are crucially influenced by anthropogenic perturbations, the question is whether the occurrence of this bifurcation is robust against uncertainties in parameters and in the number of considered processes and secondly, whether the bifurcation can be reached under climate change. Results indicate, for example, the robustness of the bifurcation point against all considered parameter uncertainties. The possibility of reaching the critical point under climate change seems rather improbable. A novel method is applied for the analysis of the occurrence and the position of the bifurcation point in the monsoon model against parameter uncertainties. This method combines two standard approaches: a bifurcation analysis with multi-parameter ensemble simulations. As a model-independent and therefore universal procedure, this method allows investigating the uncertainty referring to a bifurcation in a high dimensional parameter space in many other models. With the monsoon model the uncertainty about the external influence of El Niño / Southern Oscillation (ENSO) is determined. There is evidence that ENSO influences the variability of the Indian monsoon, but the underlying physical mechanism is discussed controversially. As a contribution to the debate three different hypotheses are tested of how ENSO and the Indian summer monsoon are linked. In this thesis the coupling through the trade winds is identified as key in linking these two key climate constituents. On the basis of this physical mechanism the observed monsoon rainfall data can be reproduced to a great extent. Moreover, this mechanism can be identified in two general circulation models (GCMs) for the present day situation and for future projections under climate change. Furthermore, uncertainties in the process of coupling models are investigated, where the focus is on a comparison of forced dynamics as opposed to fully coupled dynamics. The former describes a particular type of coupling, where the dynamics from one sub-module is substituted by data. Intrinsic uncertainties and constraints are identified that prevent the consistency of a forced model with its fully coupled counterpart. Qualitative discrepancies between the two modelling approaches are highlighted, which lead to an overestimation of predictability and produce artificial predictability in the forced system. The results suggest that bistability and intermittent predictability, when found in a forced model set-up, should always be cross-validated with alternative coupling designs before being taken for granted. All in this, this thesis contributes to the fundamental issue of dealing with uncertainties the climate modelling community is confronted with. Although some uncertainties allow for including them in the interpretation of the model results, intrinsic uncertainties could be identified, which are inevitable within a certain modelling paradigm and are provoked by the specific modelling approach.
In view of the importance of charge storage in polymer electrets for electromechanical transducer applications, the aim of this work is to contribute to the understanding of the charge-retention mechanisms. Furthermore, we will try to explain how the long-term storage of charge carriers in polymeric electrets works and to identify the probable trap sites. Charge trapping and de-trapping processes were investigated in order to obtain evidence of the trap sites in polymeric electrets. The charge de-trapping behavior of two particular polymer electrets was studied by means of thermal and optical techniques. In order to obtain evidence of trapping or de-trapping, charge and dipole profiles in the thickness direction were also monitored. In this work, the study was performed on polyethylene terephthalate (PETP) and on cyclic-olefin copolymers (COCs). PETP is a photo-electret and contains a net dipole moment that is located in the carbonyl group (C = O). The electret behavior of PETP arises from both the dipole orientation and the charge storage. In contrast to PETP, COCs are not photo-electrets and do not exhibit a net dipole moment. The electret behavior of COCs arises from the storage of charges only. COC samples were doped with dyes in order to probe their internal electric field. COCs show shallow charge traps at 0.6 and 0.11 eV, characteristic for thermally activated processes. In addition, deep charge traps are present at 4 eV, characteristic for optically stimulated processes. PETP films exhibit a photo-current transient with a maximum that depends on the temperature with an activation energy of 0.106 eV. The pair thermalization length (rc) calculated from this activation energy for the photo-carrier generation in PETP was estimated to be approx. 4.5 nm. The generated photo-charge carriers can recombine, interact with the trapped charge, escape through the electrodes or occupy an empty trap. PETP possesses a small quasi-static pyroelectric coefficient (QPC): ~0.6 nC/(m²K) for unpoled samples, ~60 nC/(m²K) for poled samples and ~60 nC/(m²K) for unpoled samples under an electric bias (E ~10 V/µm). When stored charges generate an internal electric field of approx. 10 V/µm, they are able to induce a QPC comparable to that of the oriented dipoles. Moreover, we observe charge-dipole interaction. Since the raw data of the QPC-experiments on PETP samples is noisy, a numerical Fourier-filtering procedure was applied. Simulations show that the data analysis is reliable when the noise level is up to 3 times larger than the calculated pyroelectric current for the QPC. PETP films revealed shallow traps at approx. 0.36 eV during thermally-stimulated current measurements. These energy traps are associated with molecular dipole relaxations (C = O). On the other hand, photo-activated measurements yield deep charge traps at 4.1 and 5.2 eV. The observed wavelengths belong to the transitions in PETP that are analogous to the π - π* benzene transitions. The observed charge de-trapping selectivity in the photocharge decay indicates that the charge detrapping is from a direct photon-charge interaction. Additionally, the charge de-trapping can be facilitated by photo-exciton generation and the interaction of the photo-excitons with trapped charge carriers. These results indicate that the benzene rings (C6H4) and the dipolar groups (C = O) can stabilize and share an extra charge carrier in a chemical resonance. In this way, this charge could be de-trapped in connection with the photo-transitions of the benzene ring and with the dipole relaxations. The thermally-activated charge release shows a difference in the trap depth to its optical counterpart. This difference indicates that the trap levels depend on the de-trapping process and on the chemical nature of the trap site. That is, the processes of charge detrapping from shallow traps are related to secondary forces. The processes of charge de-trapping from deep traps are related to primary forces. Furthermore, the presence of deep trap levels causes the stability of the charge for long periods of time.
In Leuchtdioden wird Licht durch die Rekombination von injizierten Ladungsträgern erzeugt. Das kann einerseits in anorganischen Materialien geschehen. In diesem Fall ist es notwendig, hochgeordnete Kristallstrukturen herzustellen, die die Eigenschaften der Leuchtdioden bestimmen. Ein anderer Ansatz ist die Verwendung von organischen Molekülen und Polymeren. Auf Grund der Vielseitigkeit der organischen Chemie können die Eigenschaften der verwendeten halbleitenden Polymere schon während der Synthese beeinflusst werden. Außerdem weisen auch diese Polymere die bekannte mechanische Flexibilität auf. Die Herstellung von flexiblen, großflächigen Beleuchtungsquellen und Anzeigelementen ist so möglich. Die erste Leuchtdiode mit einem halbleitenden Polymer als Emitter wurde 1990 hergestellt. Seither hat das Forschungsgebiet eine rasante Entwicklung genommen. Auch erste kommerzielle Produkte sind erhältlich. Im Zuge dieser Entwicklung wurde deutlich, dass die Eigenschaften von polymeren Leuchtdioden – beispielsweise Farbe und Effizienz – durch die Verwendung mehrerer Komponenten in der aktiven Schicht deutlich verbessert werden können. Gleichzeitig ergeben sich neue Herausforderungen durch die Wechselwirkungen der verschiedenen Filmbestandteile. Während die Komponenten oft entweder zur Verbesserung des Ladungstransportes oder zur Beeinflussung der Emission zugegeben werden, muss darauf geachtet werden, dass die anderen Prozesse nicht negativ beeinflusst werden. In dieser Arbeit werden einige dieser Wechselwirkungen untersucht und mit einfachen physikalischen Modellen erklärt. So werden zunächst blau emittierende Leuchtdioden auf der Basis von Polyfluoren untersucht. Dieses Material ist zwar ein sehr effizienter blauer Emitter, jedoch ist es anfällig für chemische Defekte, diese sich nicht vollständig verhindern lassen. Die Defekte bilden Fallenzustände für Elektronen, ihr Einfluss lässt sich durch die Zugabe von Lochfallen unterdrücken. Der zugrunde liegende Prozess, die Beeinflussung der Ladungsträgerbalance, wird erklärt. Im Folgenden werden Mischsystemen mit dendronisierten Emittern, die gleichzeitig eine Falle für Elektronen bilden, untersucht. Hier wird die unterschiedliche Wirkung der isolierenden Hülle auf die Ladungs- und Energieübertragung zwischen Matrix und Farbstoffkern der Dendrimere untersucht. In Mischsystemen haben die Natur der angeregten Zustände sowie die Art und Weise des Ladungsträgertransportes einen großen Einfluss auf diese Transferprozesse. Außerden hat auch hier die Ladungsträgerbalance Auswirkungen auf die Emission. Um den Ladungsträgereinfang in Fallenzuständen zu charakterisieren, wird eine Methode auf Grundlage der Messung des zeitaufgelösten Photostroms in organischen Mischfilmen weiterentwickelt. Die erzielten Ergebnisse zeigen, dass die Übertragung der für geordnete Systeme entwickelten Modelle des Ladungsträgertransportes nicht ohne weiteres auf Polymersysteme mit hoher Unordnung übertragen werden können. Abschließend werden zeitaufgelöste Messungen der Phosphoreszenz in entsprechenden Mischungen aus Polymeren und organometallischen Verbindungen vorgestellt. Auch diese Systeme enthalten üblicherweise weitere Komponenten, die den Ladungstransport verbessern. In diesen Filmen kann es zu einer Übertragung der Tripletts vom Emitter auf die weiteren Filmbestandteile kommen. Bei Kenntnis der in Frage kommenden Wechselwirkungen können die unerwünschten Prozesse vermieden werden.
We investigate the effect of wind clumping on the dynamics of Wolf-Rayet winds, by means of the Potsdam Wolf-Rayet (PoWR) hydrodynamic atmosphere models. In the limit of microclumping the radiative acceleration is generally enhanced. We examine the reasons for this effect and show that the resulting wind structure depends critically on the assumed radial dependence of the clumping factor D(r). The observed terminal wind velocities for WR stars imply that D(r) increases to very large values in the outer part of the wind, in agreement with the assumption of detached expanding shells.
In this work, some new results to exploit the recurrence properties of quasiperiodic dynamical systems are presented by means of a two dimensional visualization technique, Recurrence Plots(RPs). Quasiperiodicity is the simplest form of dynamics exhibiting nontrivial recurrences, which are common in many nonlinear systems. The concept of recurrence was introduced to study the restricted three body problem and it is very useful for the characterization of nonlinear systems. I have analyzed in detail the recurrence patterns of systems with quasiperiodic dynamics both analytically and numerically. Based on a theoretical analysis, I have proposed a new procedure to distinguish quasiperiodic dynamics from chaos. This algorithm is particular useful in the analysis of short time series. Furthermore, this approach demonstrates to be efficient in recognizing regular and chaotic trajectories of dynamical systems with mixed phase space. Regarding the application to real situations, I have shown the capability and validity of this method by analyzing time series from fluid experiments.
The intergalactic medium is kept highly photoionised by the intergalactic UV background radiation field generated by the overall population of quasars and galaxies. In the vicinity of sources of UV photons, such as luminous high-redshift quasars, the UV radiation field is enhanced due to the local source contribution. The higher degree of ionisation is visible as a reduced line density or generally as a decreased level of absorption in the Lyman alpha forest of neutral hydrogen. This so-called proximity effect has been detected with high statistical significance towards luminous quasars. If quasars radiate rather isotropically, background quasar sightlines located near foreground quasars should show a region of decreased Lyman alpha absorption close to the foreground quasar. Despite considerable effort, such a transverse proximity effect has only been detected in a few cases. So far, studies of the transverse proximity effect were mostly limited by the small number of suitable projected pairs or groups of high-redshift quasars. With the aim to substantially increase the number of quasar groups in the vicinity of bright quasars we conduct a targeted survey for faint quasars around 18 well-studied quasars at employing slitless spectroscopy. Among the reduced and calibrated slitless spectra of 29000 objects on a total area of 4.39 square degrees we discover in total 169 previously unknown quasar candidates based on their prominent emission lines. 81 potential z>1.7 quasars are selected for confirmation by slit spectroscopy at the Very Large Telescope (VLT). We are able to confirm 80 of these. 64 of the newly discovered quasars reside at z>1.7. The high success rate of the follow-up observations implies that the majority of the remaining candidates are quasars as well. In 16 of these groups we search for a transverse proximity effect as a systematic underdensity in the HI Lyman alpha absorption. We employ a novel technique to characterise the random absorption fluctuations in the forest in order to estimate the significance of the transverse proximity effect. Neither low-resolution spectra nor high-resolution spectra of background quasars of our groups present evidence for a transverse proximity effect. However, via Monte Carlo simulations the effect should be detectable only at the 1-2sigma level near three of the foreground quasars. Thus, we cannot distinguish between the presence or absence of a weak signature of the transverse proximity effect. The systematic effects of quasar variability, quasar anisotopy and intrinsic overdensities near quasars likely explain the apparent lack of the transverse proximity effect. Even in absence of the systematic effects, we show that a statistically significant detection of the transverse proximity effect requires at least 5 medium-resolution quasar spectra of background quasars near foreground quasars whose UV flux exceeds the UV background by a factor 3. Therefore, statistical studies of the transverse proximity effect require large numbers of suitable pairs. Two sightlines towards the central quasars of our survey fields show intergalactic HeII Lyman alpha absorption. A comparison of the HeII absorption to the corresponding HI absorption yields an estimate of the spectral shape of the intergalactic UV radiation field, typically parameterised by the HeII/HI column density ratio eta. We analyse the fluctuating UV spectral shape on both lines of sight and correlate it with seven foreground quasars. On the line of sight towards Q0302-003 we find a harder radiation field near 4 foreground quasars. In the direct vicinity of the quasars eta is consistent with values of 25-100, whereas at large distances from the quasars eta>200 is required. The second line of sight towards HE2347-4342 probes lower redshifts where eta is directly measurable in the resolved HeII forest. Again we find that the radiation field near the 3 foreground quasars is significantly harder than in general. While eta still shows large fluctuations near the quasars, probably due to radiative transfer, the radiation field is on average harder near the quasars than far away from them. We interpret these discoveries as the first detections of the transverse proximity effect as a local hardness fluctuation in the UV spectral shape. No significant HI proximity effect is predicted for the 7 foreground quasars. In fact, the HI absorption near the quasars is close to or slightly above the average, suggesting that the weak signature of the transverse proximity effect is masked by intrinsic overdensities. However, we show that the UV spectral shape traces the transverse proximity effect even in overdense regions or at large distances. Therefore, the spectral hardness is a sensitive physical measure of the transverse proximity effect that is able to break the density degeneracy affecting the traditional searches.
This thesis describes two main projects; the first one is the optimization of a hierarchical search strategy to search for unknown pulsars. This project is divided into two parts; the first part (and the main part) is the semi-coherent hierarchical optimization strategy. The second part is a coherent hierarchical optimization strategy which can be used in a project like Einstein@Home. In both strategies we have found that the 3-stages search is the optimum strategy to search for unknown pulsars. For the second project we have developed a computer software for a coherent Multi-IFO (Interferometer Observatory) search. To validate our software, we have worked on simulated data as well as hardware injected signals of pulsars in the fourth LIGO science run (S4). While with the current sensitivity of our detectors we do not expect to detect any true Gravitational Wave signals in our data, we can still set upper limits on the strength of the gravitational waves signals. These upper limits, in fact, tell us how weak a signal strength we would detect. We have also used our software to set upper limits on the signal strength of known isolated pulsars using LIGO fifth science run (S5) data.
The predictability problem
(2007)
We try to determine whether it is possible to approximate the subjective Cloze predictability measure with two types of objective measures, semantic and word n-gram measures, based on the statistical properties of text corpora. The semantic measures are constructed either by querying Internet search engines or by applying Latent Semantic Analysis, while the word n-gram measures solely depend on the results of Internet search engines. We also analyse the role of Cloze predictability in the SWIFT eye movement model, and evaluate whether other parameters might be able to take the place of predictability. Our results suggest that a computational model that generates predictability values not only needs to use measures that can determine the relatedness of a word to its context; the presence of measures that assert unrelatedness is just as important. In spite of the fact, however, that we only have similarity measures, we predict that SWIFT should perform just as well when we replace Cloze predictability with our measures.
This dissertation contains theoretical investigations on the morphology and statistical mechanics of vesicles. The shapes of homogeneous fluid vesicles and inhomogeneous vesicles with fluid and solid membrane domains are calculated. The influence of thermal fluctuations is investigated. The obtained results are valid on mesoscopic length scales and are based on a geometrical membrane model, where the vesicle membrane is described as either a static or a thermal fluctuating surface. The thesis consists of three parts. In the first part, homogeneous vesicles are considered. The focus in this part is on the thermally induced morphological transition between vesicles with prolate and oblate shape. With the help of Monte Carlo simulations, the free energy profile of these vesicles is determined. It can be shown that the shape transformation between prolate and oblate vesicles proceeds continuously and is not hampered by a free energy barrier. The second and third part deal with inhomogeneous vesicles which contain intramembrane domains. These investigations are motivated by experimental results on domain formation in single or multicomponent vesicles, where phase separation occurs and different membrane phases coexist. The resulting domains differ with regard to their membrane structure (solid, fluid). The membrane structure has a distinct effect on the form of the domain and the morphology of the vesicle. In the second part, vesicles with coexisting solid and fluid membrane domains are studied, while the third part addresses vesicles with coexisting fluid domains. The equilibrium morphology of vesicles with simple and complex domain forms, derived through minimisation of the membrane energy, is determined as a function of material parameters. The results are summarised in morphology diagrams. These diagrams show previously unknown morphological transitions between vesicles with different domain shapes. The impact of thermal fluctuations on the vesicle and the form of the domains is investigated by means of Monte Carlo simulations.
In dieser Arbeit wurde die Variabilität der Atmosphäre in einem neuen gekoppelten Klimamodell (ECHO-GiSP) untersucht, welches eine vereinfachte Stratosphärenchemie (bis 80 km Höhe) enthält. Es wurden 2 Simulationen über 150 Jahre durchgeführt. In einer der Simulationen wurde die atmosphärische Chemie modelliert, hatte aber keinen Einfluß auf die Dynamik des Klimamodelles. In der zweiten Simulation wurde hingegen die Wirkung der Chemie auf die Klimadynamik explizit berücksichtigt, die über die Strahlungsbilanz des Modelles erfolgt. Dies ist die erste Langzeitsimulation mit einem voll gekoppelten globalen Klimamodell mit interaktiver Chemie. Die Simulation mit rückgekoppelter Chemie zeigt eine Abschwächung des atmosphärischen Variabilitätsmusters der Arktischen Oszillation (AO). Zudem kommt es in der Troposphäre zu einer Reduzierung der mittleren Windgeschwindigkeiten der gemäßigten Breiten aufgrund verringerter Temperaturgegensätze zwischen den Tropen und den Polargebieten. Auch in der Stratosphäre ergibt sich eine Abschwächung und Erwärmung des Polarwirbels. Diese Auswirkungen der Kopplung zwischen der atmosphärischen Chemie und der Dynamik des Klimamodelles sind eine wichtige Erkenntnis, da in früheren Klimasimulationen die Variabilität der AO oft zu stark ausgeprägt war. In der Stratosphäre reduziert sich infolge des abgeschwächten Polarwirbels auch die großräumige Zirkulation zwischen den beiden Hemisphären der Erde. In der Troposphäre werden hingegen die allgemeine Zirkulation, und damit auch die subtropischen Strahlströme des Windes verstärkt. Zudem kommt es in den Tropen zu Temperaturänderungen durch stratosphärische Ozonschwankungen in Abhängigkeit von der AO. Allgemein verändert sich die Kopplung zwischen Troposphäre und Stratosphäre, einschließlich des durch die Anregung von langen atmosphärischen Wellen erfolgenden vertikalen Energieübertrages aus der Troposphäre in die Stratosphäre.
Proteins are chain molecules built from amino acids. The precise sequence of the 20 different types of amino acids in a protein chain defines into which structure a protein folds, and the three-dimensional structure in turn specifies the biological function of the protein. The reliable folding of proteins is a prerequisite for their robust function. Misfolding can lead to protein aggregates that cause severe diseases, such as Alzheimer's, Parkinson's, or the variant Creutzfeldt-Jakob disease. Small single-domain proteins often fold without experimentally detectable metastable intermediate states. The folding dynamics of these proteins is thought to be governed by a single transition-state barrier between the unfolded and the folded state. The transition state is highly instable and cannot be observed directly. However, mutations in which a single amino acid of the protein is substituted by another one can provide indirect access. The mutations slightly change the transition-state barrier and, thus, the folding and unfolding times of the protein. The central question is how to reconstruct the transition state from the observed changes in folding times. In this habilitation thesis, a novel method to extract structural information on transition states from mutational data is presented. The method is based on (i) the cooperativity of structural elements such as alpha-helices and beta-hairpins, and (ii) on splitting up mutation-induced free-energy changes into components for these elements. By fitting few parameters, the method reveals the degree of structure formation of alpha-helices and beta-hairpins in the transition state. In addition, it is shown in this thesis that the folding routes of small single-domain proteins are dominated by loop-closure dependencies between the structural elements.
During the last few years there was a tremendous growth of scientific activities in the fields related to both Physics and Control theory: nonlinear dynamics, micro- and nanotechnologies, self-organization and complexity, etc. New horizons were opened and new exciting applications emerged. Experts with different backgrounds starting to work together need more opportunities for information exchange to improve mutual understanding and cooperation. The Conference "Physics and Control 2007" is the third international conference focusing on the borderland between Physics and Control with emphasis on both theory and applications. With its 2007 address at Potsdam, Germany, the conference is located for the first time outside of Russia. The major goal of the Conference is to bring together researchers from different scientific communities and to gain some general and unified perspectives in the studies of controlled systems in physics, engineering, chemistry, biology and other natural sciences. We hope that the Conference helps experts in control theory to get acquainted with new interesting problems, and helps experts in physics and related fields to know more about ideas and tools from the modern control theory.
Our dynamic Sun manifests its activity by different phenomena: from the 11-year cyclic sunspot pattern to the unpredictable and violent explosions in the case of solar flares. During flares, a huge amount of the stored magnetic energy is suddenly released and a substantial part of this energy is carried by the energetic electrons, considered to be the source of the nonthermal radio and X-ray radiation. One of the most important and still open question in solar physics is how the electrons are accelerated up to high energies within (the observed in the radio emission) short time scales. Because the acceleration site is extremely small in spatial extent as well (compared to the solar radius), the electron acceleration is regarded as a local process. The search for localized wave structures in the solar corona that are able to accelerate electrons together with the theoretical and numerical description of the conditions and requirements for this process, is the aim of the dissertation. Two models of electron acceleration in the solar corona are proposed in the dissertation: I. Electron acceleration due to the solar jet interaction with the background coronal plasma (the jet--plasma interaction) A jet is formed when the newly reconnected and highly curved magnetic field lines are relaxed by shooting plasma away from the reconnection site. Such jets, as observed in soft X-rays with the Yohkoh satellite, are spatially and temporally associated with beams of nonthermal electrons (in terms of the so-called type III metric radio bursts) propagating through the corona. A model that attempts to give an explanation for such observational facts is developed here. Initially, the interaction of such jets with the background plasma leads to an (ion-acoustic) instability associated with growing of electrostatic fluctuations in time for certain range of the jet initial velocity. During this process, any test electron that happen to feel this electrostatic wave field is drawn to co-move with the wave, gaining energy from it. When the jet speed has a value greater or lower than the one, required by the instability range, such wave excitation cannot be sustained and the process of electron energization (acceleration and/or heating) ceases. Hence, the electrons can propagate further in the corona and be detected as type III radio burst, for example. II. Electron acceleration due to attached whistler waves in the upstream region of coronal shocks (the electron--whistler--shock interaction) Coronal shocks are also able to accelerate electrons, as observed by the so-called type II metric radio bursts (the radio signature of a shock wave in the corona). From in-situ observations in space, e.g., at shocks related to co-rotating interaction regions, it is known that nonthermal electrons are produced preferably at shocks with attached whistler wave packets in their upstream regions. Motivated by these observations and assuming that the physical processes at shocks are the same in the corona as in the interplanetary medium, a new model of electron acceleration at coronal shocks is presented in the dissertation, where the electrons are accelerated by their interaction with such whistlers. The protons inflowing toward the shock are reflected there by nearly conserving their magnetic moment, so that they get a substantial velocity gain in the case of a quasi-perpendicular shock geometry, i.e, the angle between the shock normal and the upstream magnetic field is in the range 50--80 degrees. The so-accelerated protons are able to excite whistler waves in a certain frequency range in the upstream region. When these whistlers (comprising the localized wave structure in this case) are formed, only the incoming electrons are now able to interact resonantly with them. But only a part of these electrons fulfill the the electron--whistler wave resonance condition. Due to such resonant interaction (i.e., of these electrons with the whistlers), the electrons are accelerated in the electric and magnetic wave field within just several whistler periods. While gaining energy from the whistler wave field, the electrons reach the shock front and, subsequently, a major part of them are reflected back into the upstream region, since the shock accompanied with a jump of the magnetic field acts as a magnetic mirror. Co-moving with the whistlers now, the reflected electrons are out of resonance and hence can propagate undisturbed into the far upstream region, where they are detected in terms of type II metric radio bursts. In summary, the kinetic energy of protons is transfered into electrons by the action of localized wave structures in both cases, i.e., at jets outflowing from the magnetic reconnection site and at shock waves in the corona.
In nature one commonly finds interacting complex oscillators which by the coupling scheme form small and large networks, e.g. neural networks. Surprisingly, the oscillators can synchronize, still preserving the complex behavior. Synchronization is a fundamental phenomenon in coupled nonlinear oscillators. Synchronization can be enhanced at different levels, that is, the constraints on which the synchronization appears. Those can be in the trajectory amplitude, requiring the amplitudes of both oscillators to be equal, giving place to complete synchronization. Conversely, the constraint could also be in a function of the trajectory, e.g. the phase, giving place to phase synchronization (PS). In this case, one requires the phase difference between both oscillators to be finite for all times, while the trajectory amplitude may be uncorrelated. The study of PS has shown its relevance to important technological problems, e.g. communication, collective behavior in neural networks, pattern formation, Parkinson disease, epilepsy, as well as behavioral activities. It has been reported that it mediates processes of information transmission and collective behavior in neural and active networks and communication processes in the Human brain. In this work, we have pursed a general way to analyze the onset of PS in small and large networks. Firstly, we have analyzed many phase coordinates for compact attractors. We have shown that for a broad class of attractors the PS phenomenon is invariant under the phase definition. Our method enables to state about the existence of phase synchronization in coupled chaotic oscillators without having to measure the phase. This is done by observing the oscillators at special times, and analyzing whether this set of points is localized. We have show that this approach is fruitful to analyze the onset of phase synchronization in chaotic attractors whose phases are not well defined, as well as, in networks of non-identical spiking/bursting neurons connected by chemical synapses. Moreover, we have also related the synchronization and the information transmission through the conditional observations. In particular, we have found that inside a network clusters may appear. These can be used to transmit more than one information, which provides a multi-processing of information. Furthermore, These clusters provide a multichannel communication, that is, one can integrate a large number of neurons into a single communication system, and information can arrive simultaneously at different places of the network.
Our Solar system contains a large amount of dust, containing valuable information about our close cosmic environment. If created in a planet's system, the particles stay predominantly in its vicinity and can form extended dust envelopes, tori or rings around them. A fascinating example of these complexes are Saturnian rings containing a wide range of particles sizes from house-size objects in the main rings up to micron-sized grains constituting the E ring. Other example are ring systems in general, containing a large fraction of dust or also the putative dust-tori surrounding the planet Mars. The dynamical life'' of such circumplanetary dust populations is the main subject of our study. In this thesis a general model of creation, dynamics and death'' of circumplanetary dust is developed. Endogenic and exogenic processes creating dust at atmosphereless bodies are presented. Then, we describe the main forces influencing the particle dynamics and study dynamical responses induced by stochastic fluctuations. In order to estimate the properties of steady-state population of considered dust complex, the grain mean lifetime as a result of a balance of dust creation, life'' and loss mechanisms is determined. The latter strongly depends on the surrounding environment, the particle properties and its dynamical history. The presented model can be readily applied to study any circumplanetary dust complex. As an example we study dynamics of two dust populations in the Solar system. First we explore the dynamics of particles, ejected from Martian moon Deimos by impacts of micrometeoroids, which should form a putative tori along the orbit of the moon. The long-term influence of indirect component of radiation pressure, the Poynting-Robertson drag gives rise in significant change of torus geometry. Furthermore, the action of radiation pressure on rotating non-spherical dust particles results in stochastic dispersion of initially confined ensemble of particles, which causes decrease of particle number densities and corresponding optical depth of the torus. Second, we investigate the dust dynamics in the vicinity of Saturnian moon Enceladus. During three flybys of the Cassini spacecraft with Enceladus, the on-board dust detector registered a micron-sized dust population around the moon. Surprisingly, the peak of the measured impact rate occurred 1 minute before the closest approach of the spacecraft to the moon. This asymmetry of the measured rate can be associated with locally enhanced dust production near Enceladus south pole. Other Cassini instruments also detected evidence of geophysical activity in the south polar region of the moon: high surface temperature and extended plumes of gas and dust leaving the surface. Comparison of our results with this in situ measurements reveals that the south polar ejecta may provide the dominant source of particles sustaining the Saturn's E ring.
Box-Simulationen von rotierender Magnetokonvektion im flüssigen Erdkern Numerische Simulationen der 3D-MHD Gleichungen sind mit Hilfe des Codes NIRVANA durchgeführt worden. Die Gleichungen für kompressible rotierende Magnetokonvektion wurden für erdähnliche Bedingungen numerisch in einer kartesischen Box gelöst. Charakteristische Eigenschaften mittlerer Größen, wie der Turbulenz-Intensität oder der turbulente Wärmefluss, die durch die kombinierte Wirkung kleinskaliger Fluktuationen entstehen, wurden bestimmt. Die Korrelationslänge der Turbulenz hängt signifikant von der Stärke und der Orientierung des Magnetfeldes ab, und das anisotrope Verhalten der Turbulenz aufgrund von Coriolis- und Lorentzkraft ist für schnellere Rotation wesentlich stärker ausgeprägt. Die Ausbildung eines isotropen Verhaltens auf kleinen Skalen unter dem Einfluss von Rotation alleine wird bereits durch ein schwaches Magnetfeld verhindert. Dies resultiert in einer turbulenten Strömung, die durch die vertikale Komponente dominiert wird. In Gegenwart eines horizontalen Magnetfeldes nimmt der vertikale turbulente Wärmefluss leicht mit zunehmender Feldstärke zu, so dass die Kühlung eines rotierenden Systems verbessert wird. Der horizontale Wärmetransport ist stets westwärts und in Richtung der Pole orientiert. Letzteres kann unter Umständen die Quelle für eine großskalige meridionale Strömung darstellen, während erstes in globalen Simulationen mit nicht axialsymmetrischen Randbedingungen für den Wärmefluss von Bedeutung ist. Die mittlere elektromotorische Kraft, die die Erzeugung von magnetischem Fluss durch die Turbulenz beschreibt, wurde unmittelbar aus den Lösungen für Geschwindigkeit und Magnetfeld berechnet. Hieraus konnten die entsprechenden α-Koeffizienten hergeleitet werden. Aufgrund der sehr schwachen Dichtestratifizierung ändert der α-Effekt sein Vorzeichen nahezu exakt in der Mitte der Box. Der α-Effekt ist positiv in der oberen Hälfte und negativ in der unteren Hälfte einer auf der Nordhalbkugel rotierenden Box. Für ein starkes Magnetfeld ergibt sich zudem eine deutliche abwärts orientierte Advektion von magnetischem Fluss. Ein Mean-Field Modell des Geodynamos wurde konstruiert, das auf dem α-Effekt basiert, wie er aus den Box-Simulationen berechnet wurde. Für eine äußerst beschränkte Klasse von radialen α-Profilen weist das lineare α^2-Modell Oszillationen auf einer Zeitskala auf, die durch die turbulente Diffusionszeit bestimmt wird. Die wesentlichen Eigenschaften der periodischen Lösungen werden präsentiert, und der Einfluss der Größe des inneren Kerns auf die Charakteristiken des kritischen Bereichs, innerhalb dessen oszillierende Lösungen auftreten, wurden untersucht. Reversals werden als eine halbe Oszillation interpretiert. Sie sind ein recht seltenes Ereignis, da sie lediglich dann stattfinden können, wenn das α-Profil ausreichend lange in dem periodische Lösungen erlaubenden Bereich liegt. Aufgrund starker Fluktuationen auf der konvektiven Zeitskala ist die Wahrscheinlichkeit eines solchen Reversals relativ klein. In einem einfachen nicht-linearen Mean-Field Modell mit realistischen Eingabeparametern, die auf den Box-Simulationen beruhen, konnte die Plausibilität des Reversal-Modells anhand von Langzeitsimulationen belegt werden.
Ziel dieser Arbeit ist die phänomenologische Untersuchung der Feuchteempfindlichkeit der elektrischen Eigenschaften dünner Polymerschichten. Diese Untersuchungen stellen gleichzeitig Vorarbeiten zur Entwicklung von Prototypen von zwei polymeren Dünnschicht-Feuchtesensoren dar, die sich durch die spezielle Auswahl der feuchtesensitiven Materialien jeweils durch eine besondere Eigenschaft gegenüber kommerziellen Massenprodukten auszeichnen. Ziel der Entwicklungsarbeiten für den ersten Prototypen war die Konstruktion eines schnellen Feuchtesensors, der plötzliche und sprunghafte Feuchteänderungen in der umgebenden Atmosphäre möglichst rasch detektieren kann. Dafür wurden dünne Schichten von Poly-DADMAC auf Interdigitalstrukturen aufgebracht, die einen möglichst direkten Kontakt zwischen feuchtesensitiver Schicht und umgebender, feuchter Atmosphäre gewährleisten. Als Messgrößen dienten die Wechselstromgrößen Widerstand und Kapazität der Schichten. Die Feuchtekennlinien der Schichten zeigen gute Konstanz und hohe Reproduzierbarkeit. Der Widerstand der Schichten ändert sich durch den Einfluss von Feuchte je nach Schichtdicke um 3 bis 5 Größenordnungen und eignet sich als Messgröße für die Feuchtigkeit im gesamten Feuchtebereich. Die Hysterese der Filme konnte auf kleiner als 2,5% r.F. bestimmt werden, die Reproduzierbarkeit auf besser als 1% r.F. Die Ansprechzeit der Schichten lässt sich schichtdickenabhängig zu 1 bis 10 Sekunden bestimmen. Hierbei zeigen besonders die dünnen Schichten kurze Ansprechzeiten. Zielstellung für den zweiten Feuchtesensor war die Entwicklung eines Prototypen, dessen sensitive Schicht sich biostatisch und biozid verhält, so dass er in biotischen Umgebungen eingesetzt werden kann. Es wurden fünf Polysulfobetaine synthetisiert, deren Biozidität und Biostatik mit dem Kontakttest nach Rönnpagel, dem ISO846-Test und Abbautests bestimmt wurde. Zwei Polymere – Poly-DMMAAPS (BT2) und Poly-[MSA-Styren-Sulfobetain] (BT5) – erwiesen sich als ausreichend biozid und biostatisch. Schichten dieser Polymere wurden auf Interdigitalstrukturen aufgezogen, anschließend wurden die Kennlinien dieser Proben aufgenommen. Die Messwerte zeigen für beide Polymere gute Konstanz und eine hohe Reproduzierbarkeit. BT2-Proben sind zwischen 20% und 80% r.F. besonders empfindlich und zeigen über einen Monat keine Langzeitdrift. Vernetzte Proben zeigen bis 50°C keinen temperaturbedingten Abfall der Feuchteempfindlichkeit. Der Einsatz vernetzter BT5-Schichten als kapazitiver Feuchtesensor ist bis etwa 70°C möglich, die Schichten sind selbst nach Lagerung im Hochvakuum und mehrfacher Betauung stabil. Damit liegen zwei funktionsfähige Prototypen von Feuchtesensoren vor, für die die meisten Kennwerte denen von vergleichbaren kommerziellen Feuchtesensoren entsprechen. Gleichzeitig zeichnen sie sich aber durch eine sehr niedrige Ansprechzeit bzw. eine ausreichende Lebensdauer unter biotischen Bedingungen aus.
Wasserdampf in der Stratosphäre und Troposphäre ist eines der wichtigsten atmosphärischen Treibhausgase. Neben seiner Bedeutung für das Klima hat es großen Einfluss auf die Bildung von polaren stratosphärischen Wolken sowie auf die atmosphärische Chemie. Weltweit erstmalig soll innerhalb eines Forscherverbundes in Deutschland ein leistungsstarkes, mobiles, abtastendes Wasserdampf-DIAL zur dreidimensional hochaufgelösten Messung des atmosphärischen Wasserdampfs entwickelt werden. Mit dem Wasserdampf-DIAL können Wasserdampfkonzentrationen in der Atmosphäre mit hoher zeitlicher und räumlicher Auflösung gemessen werden. Das DIAL basiert auf einem Titan-Saphir-Laser oder einem dazu alternativen OPO-Laser (optisch parametrischer Oszillator). Der für das optische Pumpen dieser Laser nötige Pumplaser wurde im Rahmen dieser Arbeit in der Arbeitsgruppe Nichtlineare Optik des Instituts für Physik der Universität Potsdam entwickelt. Ein hochauflösendes, mobiles DIAL erfordert einen Pumplaser mit großen Pulsenergien, guter Strahlqualität und einer hohen Effizienz. Um diese Ziele zu erreichen, wurde ein MOPA-System (Master Oscillator Power Amplifier) mit Frequenzstabilisierung auf der Basis von doppelbrechungskompensierten, transversal diodengepumpten Laserstäben entwickelt und untersucht. Auf dem Weg dahin wurden unterschiedliche Realisierungsmöglichkeiten des MOPA-Systems geprüft. Im Rahmen dessen wurden die Festkörperlasermaterialien Yb:YAG [1], kerndotierte Nd:YAG-Keramik [2] und herkömmliches Nd:YAG vorgestellt und hinsichtlich ihrer Eignung für dieses MOPA-System untersucht. Nachdem die Entscheidung für Nd:YAG als laseraktives Material gefallen war, konnte darauf aufbauend die Konzeptionierung des Lasersystems auf der Basis von Verstärkungsrechnungen vorgenommen werden. Die entwickelte Verstärkungsrechnung trägt den Tatbeständen von realen Systemen Rechnung, indem radiusabhängige Intensitäten und eine radiale, nicht homogene Inversionsdichte berücksichtigt werden. Die Frequenzstabilisierung des gepulsten Oszillators (Frequenzstabilität von 1 MHz) wurde mittels des Pound-Drever-Hall-Verfahrens vorgenommen. Mit der Heterodynmethode wird die Frequenzstabilität des Oszillators gemessen. Nach Untersuchungen über verschiedene Konfigurationen für lineare und ringförmige Oszillatoren, wurde ein Ringoszillator mit zwei Laserköpfen aufgebaut, in welchen von außen mit einem Laser fester Frequenz eingestrahlt wird. Dieser emittiert bei einer Wiederholrate von 400 Hz eine Pulsenergie von Eout = 21 mJ bei nahezu beugungsbegrenzter Strahlqualität (M2 < 1,2). Die Verstärkung dieser Laserpulse erfolgte zunächst durch eine Vorverstärkerstufe und anschließend durch zwei doppelbrechungskompensierte Hauptverstärker im Doppeldurchgang. Eine gute Strahlqualität (M2 = 1,75) konnte unter anderem erzielt werden, indem der Doppeldurchgang durch die Hauptverstärker mit einem phasenkonjugierenden Spiegel (SF6), auf der Basis der stimulierten Brillouin Streuung, realisiert wurde. Der entwickelte Laser emittiert Pulse mit einer Länge von 25 ns und einer Energie von 250 mJ. Insgesamt wurde ein bisher einmaliges Lasersystem entwickelt. In der Literatur sind die erreichte Frequenzstabilität, Strahlqualität und Leistung in dieser Kombination bisher nicht dokumentiert. In der Zukunft soll durch den Einsatz von kerndotierten, keramischen Lasermaterialien, höheren Pumpleistungen der Hauptverstärker und phasenkonjugierenden Spiegeln aus Quarz die Pulsenergie des Systems weiter erhöht werden. [1] M. Ostermeyer, A. Straesser, “Theoretical investigation of Yb:YAG as laser material for nanosecond pulse emission with large energies in the joule range”, Optics Communications, Vol. 274, pp. 422-428 (2007) [2] A. Sträßer and M. Ostermeyer, “Improving the brightness of side pumped power amplifiers by using core doped ceramic rods”, Optics Express, Vol. 14, pp. 6687- 6693 (2006)
Atmospheric circulation and the surface mass balance in a regional climate model of Antarctica
(2007)
Understanding the Earth's climate system and particularly climate variability presents one of the most difficult and urgent challenges in science. The Antarctic plays a crucial role in the global climate system, since it is the principal region of radiative energy deficit and atmospheric cooling. An assessment of regional climate model HIRHAM is presented. The simulations are generated with the HIRHAM model, which is modified for Antarctic applications. With a horizontal resolution of 55km, the model has been run for the period 1958-1998 creating long-term simulations from initial and boundary conditions provided by the European Centre for Medium-Range Weather Forecasts (ECMWF) ERA40 re-analysis. The model output is compared with observations from observation stations, upper air data, global atmospheric analyses and satellite data. In comparison with the observations, the evaluation shows that the simulations with the HIRHAM model capture both the large and regional scale circulation features with generally small bias in the modeled variables. On the annual time scale the largest errors in the model simulations are the overestimation total cloud cover and the colder near-surface temperature over the interior of the Antarctic plateau. The low-level temperature inversion as well as low-level wind jet is well captured by the model. The decadal scale processes were studied based on trend calculations. The long-term run was divided into two 20 years parts. The 2m temperature, 500 hPa temperature, MSLP, precipitation and net mass balance trends were calculated for both periods and over 1958 - 1998. During the last two decades the strong surface cooling was observed over the Eastern Antarctica, this result is in good agreement with the result of Chapman and Walsh (2005) who calculated the temperature trend based on the observational data. The MSLP trend reveals a big disparity between the first and second parts of the 40 year run. The overall trend shows the strengthening of the circumpolar vortex and continental anticyclone. The net mass balance as well as precipitation show a positive trend over the Antarctic Peninsula region, along Wilkes Land and in Dronning Maud Land. The Antarctic ice sheet grows over the Eastern part of Antarctica with small exceptions in Dronning Maud Land and Wilkes Land and sinks in the Antarctic Peninsula; this result is in good agreement with the satellite-measured altitude presented in Davis (2005) . To better understand the horizontal structure of MSLP, temperature and net mass balance trends the influence of the Southern Annual Mode (SAM) on the Antarctic climate was investigated. The main meteorological parameters during the positive and negative Antarctic Oscillation (AAO) phases were compared to each other. A positive/negative AAO index means strengthening/weakening of the circumpolar vortex, poleward/northward storm tracks and prevailing/weakening westerly winds. For detailed investigation of global teleconnection, two positive and one negative periods of AAO phase were chosen. The differences in MSLP and 2m temperature between positive and negative AAO years during the winter months partly explain the surface cooling during the last decades.
The interaction between neuronal cells can be identified as the computing mechanism of the brain. Neurons are complex cells that do not operate in isolation, but they are organized in a highly connected network structure. There is experimental evidence that groups of neurons dynamically synchronize their activity and process brain functions at all levels of complexity. A fundamental step to prove this hypothesis is to analyze large sets of single neurons recorded in parallel. Techniques to obtain these data are meanwhile available, but advancements are needed in the pre-processing of the large volumes of acquired data and in data analysis techniques. Major issues include extracting the signal of single neurons from the noisy recordings (referred to as spike sorting) and assessing the significance of the synchrony. This dissertation addresses these issues with two complementary strategies, both founded on the manipulation of point processes under rigorous analytical control. On the one hand I modeled the effect of spike sorting errors on correlated spike trains by corrupting them with realistic failures, and studied the corresponding impact on correlation analysis. The results show that correlations between multiple parallel spike trains are severely affected by spike sorting, especially by erroneously missing spikes. When this happens sorting strategies characterized by classifying only good'' spikes (conservative strategies) lead to less accurate results than tolerant'' strategies. On the other hand, I investigated the effectiveness of methods for assessing significance that create surrogate data by displacing spikes around their original position (referred to as dithering). I provide analytical expressions of the probability of coincidence detection after dithering. The effectiveness of spike dithering in creating surrogate data strongly depends on the dithering method and on the method of counting coincidences. Closed-form expressions and bounds are derived for the case where the dither equals the allowed coincidence interval. This work provides new insights into the methodologies of identifying synchrony in large-scale neuronal recordings, and of assessing its significance.
The mammalian brain is, with its numerous neural elements and structured complex connectivity, one of the most complex systems in nature. Recently, large-scale corticocortical connectivities, both structural and functional, have received a great deal of research attention, especially using the approach of complex networks. Here, we try to shed some light on the relationship between structural and functional connectivities by studying synchronization dynamics in a realistic anatomical network of cat cortical connectivity. We model the cortical areas by a subnetwork of interacting excitable neurons (multilevel model) and by a neural mass model (population model). With weak couplings, the multilevel model displays biologically plausible dynamics and the synchronization patterns reveal a hierarchical cluster organization in the network structure. We can identify a group of brain areas involved in multifunctional tasks by comparing the dynamical clusters to the topological communities of the network. With strong couplings of multilevel model and by using neural mass model, the dynamics are characterized by well-defined oscillations. The synchronization patterns are mainly determined by the node intensity (total input strengths of a node); the detailed network topology is of secondary importance. The biologically improved multilevel model exhibits similar dynamical patterns in the two regimes. Thus, the study of synchronization in a multilevel complex network model of cortex can provide insights into the relationship between network topology and functional organization of complex brain networks.
Nowadays, colloidal rods can be synthesized in large amounts. The rods are typically cylindrically and their length ranges from several nanometers to a few micrometers. In solution, systems of colloidal rodlike molecules or aggregates can form liquid-crystalline phases with long-range orientational and spatial order. In the present work, we investigate structure formation and fractionation in systems of rodlike colloids with the help of Monte Carlo simulations in the NPT ensemble. Repulsive interactions can successfully be mimicked by the hard rod model, which has been studied extensively in the past. In many cases, attractive interactions like van der Waals or depletion forces cannot be neglected, however. In the first part of this work, the phase behavior of monodisperse attractive rods is characterized for different interaction strengths. Phase diagrams as a function of rod length and pressure are presented. Most systems of synthesized mesoscopic rods have a polydisperse length distribution as a consequence of the longitudinal growth process of the rods. For many technical and research applications, a rather small polydispersity is desired in order to have well defined material properties. The polydispersity can be reduced by a spatial demixing (fractionation) of long and short rods. Fractionation and structure formation is studied in a tridisperse and a polydisperse bulk suspension of rods. We observe that the resulting structures depend distinctly on the interaction strength. The fractionation in the system is strongly enhanced with increasing interaction strength. Suspensions are typically confined in a container. We also examine the influence of adjacent substrates in systems of tridisperse and polydisperse rod suspensions. Three different substrate types are studied in detail: a planar wall, a corrugated substrate, and a substrate with rectangular cavities. We analyze the fluid structure close to the substrate and substrate controlled fractionation. The spatial arrangement of long and short rods in front of the substrate depends sensitively on the substrate structure and the pressure. Rods with a predefined length are segregated at substrates with rectangular cavities.
In this thesis the interplay between hydrodynamic transport and specific adhesion is theoretically investigated. An important biological motivation for this work is the rolling adhesion of white blood cells experimentally investigated in flow chambers. There, specific adhesion is mediated by weak bonds between complementary molecular building blocks which are either located on the cell surface (receptors) or attached to the bottom plate of the flow chamber (ligands). The model system under consideration is a hard sphere covered with receptors moving above a planar ligand-bearing wall. The motion of the sphere is influenced by a simple shear flow, deterministic forces, and Brownian motion. An algorithm is given that allows to numerically simulate this motion as well as the formation and rupture of bonds between receptors and ligands. The presented algorithm spatially resolves receptors and ligands. This opens up the perspective to apply the results also to flow chamber experiments done with patterned substrates based on modern nanotechnological developments. In the first part the influence of flow rate, as well as of the number and geometry of receptors and ligands, on the probability for initial binding is studied. This is done by determining the mean time that elapses until the first encounter between a receptor and a ligand occurs. It turns out that besides the number of receptors, especially the height by which the receptors are elevated above the surface of the sphere plays an important role. These findings are in good agreement with observations of actual biological systems like white blood cells or malaria-infected red blood cells. Then, the influence of bonds which have formed between receptors and ligands, but easily rupture in response to force, on the motion of the sphere is studied. It is demonstrated that different states of motion-for example rolling-can be distinguished. The appearance of these states depending on important model parameters is then systematically investigated. Furthermore, it is shown by which bond property the ability of cells to stably roll in a large range of applied flow rates is increased. Finally, the model is applied to another biological process, the transport of spherical cargo particles by molecular motors. In analogy to the so far described systems molecular motors can be considered as bonds that are able to actively move. In this part of the thesis the mean distance the cargo particles are transported is determined.
It is desirable to reduce the potential threats that result from the variability of nature, such as droughts or heat waves that lead to food shortage, or the other extreme, floods that lead to severe damage. To prevent such catastrophic events, it is necessary to understand, and to be capable of characterising, nature's variability. Typically one aims to describe the underlying dynamics of geophysical records with differential equations. There are, however, situations where this does not support the objectives, or is not feasible, e.g., when little is known about the system, or it is too complex for the model parameters to be identified. In such situations it is beneficial to regard certain influences as random, and describe them with stochastic processes. In this thesis I focus on such a description with linear stochastic processes of the FARIMA type and concentrate on the detection of long-range dependence. Long-range dependent processes show an algebraic (i.e. slow) decay of the autocorrelation function. Detection of the latter is important with respect to, e.g. trend tests and uncertainty analysis. Aiming to provide a reliable and powerful strategy for the detection of long-range dependence, I suggest a way of addressing the problem which is somewhat different from standard approaches. Commonly used methods are based either on investigating the asymptotic behaviour (e.g., log-periodogram regression), or on finding a suitable potentially long-range dependent model (e.g., FARIMA[p,d,q]) and test the fractional difference parameter d for compatibility with zero. Here, I suggest to rephrase the problem as a model selection task, i.e.comparing the most suitable long-range dependent and the most suitable short-range dependent model. Approaching the task this way requires a) a suitable class of long-range and short-range dependent models along with suitable means for parameter estimation and b) a reliable model selection strategy, capable of discriminating also non-nested models. With the flexible FARIMA model class together with the Whittle estimator the first requirement is fulfilled. Standard model selection strategies, e.g., the likelihood-ratio test, is for a comparison of non-nested models frequently not powerful enough. Thus, I suggest to extend this strategy with a simulation based model selection approach suitable for such a direct comparison. The approach follows the procedure of a statistical test, with the likelihood-ratio as the test statistic. Its distribution is obtained via simulations using the two models under consideration. For two simple models and different parameter values, I investigate the reliability of p-value and power estimates obtained from the simulated distributions. The result turned out to be dependent on the model parameters. However, in many cases the estimates allow an adequate model selection to be established. An important feature of this approach is that it immediately reveals the ability or inability to discriminate between the two models under consideration. Two applications, a trend detection problem in temperature records and an uncertainty analysis for flood return level estimation, accentuate the importance of having reliable methods at hand for the detection of long-range dependence. In the case of trend detection, falsely concluding long-range dependence implies an underestimation of a trend and possibly leads to a delay of measures needed to take in order to counteract the trend. Ignoring long-range dependence, although present, leads to an underestimation of confidence intervals and thus to an unjustified belief in safety, as it is the case for the return level uncertainty analysis. A reliable detection of long-range dependence is thus highly relevant in practical applications. Examples related to extreme value analysis are not limited to hydrological applications. The increased uncertainty of return level estimates is a potentially problem for all records from autocorrelated processes, an interesting examples in this respect is the assessment of the maximum strength of wind gusts, which is important for designing wind turbines. The detection of long-range dependence is also a relevant problem in the exploration of financial market volatility. With rephrasing the detection problem as a model selection task and suggesting refined methods for model comparison, this thesis contributes to the discussion on and development of methods for the detection of long-range dependence.
In der vorliegenden Arbeit werden Methoden der Erdsystemanalyse auf die Untersuchung der Habitabilität terrestrischer Exoplaneten angewandt. Mit Hilfe eines parametrisierten Konvektionsmodells für die Erde wird die thermische Evolution von terrestrischen Planeten berechnet. Bei zunehmender Leuchtkraft des Zentralsterns wird über den globalen Karbonat-Silikat-Kreislauf das planetare Klima stabilisiert. Für eine photosynthetisch-aktive Biosphäre, die in einem bestimmten Temperaturbereich bei hinreichender CO2-Konzentration existieren kann, wird eine Überlebenspanne abgeschätzt. Der Abstandsbereich um einen Stern, in dem eine solche Biosphäre produktiv ist, wird als photosynthetisch-aktive habitable Zone (pHZ) definiert und berechnet. Der Zeitpunkt, zu dem die pHZ in einem extrasolaren Planetensystem endgültig verschwindet, ist die maximale Lebenspanne der Biosphäre. Für Supererden, massereiche terrestrische Planeten, ist sie umso länger, je massereicher der Planet ist und umso kürzer, je mehr er mit Kontinenten bedeckt ist. Für Supererden, die keine ausgeprägten Wasser- oder Landwelten sind, skaliert die maximale Lebenspanne mit der Planetenmasse mit einem Exponenten von 0,14. Um K- und M-Sterne ist die Überlebensspanne einer Biosphäre auf einem Planeten immer durch die maximale Lebensspanne bestimmt und nicht durch das Ende der Hauptreihenentwicklung des Zentralsterns limitiert. Das pHZ-Konzept wird auf das extrasolare Planetensystem Gliese 581 angewandt. Danach könnte die 8-Erdmassen-Supererde Gliese 581d habitabel sein. Basierend auf dem vorgestellten pHZ-Konzept wird erstmals die von Ward und Brownlee 1999 aufgestellte Rare-Earth-Hypothese für die Milchstraße quantifiziert. Diese Hypothese besagt, dass komplexes Leben im Universum vermutlich sehr selten ist, wohingegen primitives Leben weit verbreitet sein könnte. Unterschiedliche Temperatur- und CO2-Toleranzen sowie ein unterschiedlicher Einfluss auf die Verwitterung für komplexe und primitive Lebensformen führt zu unterschiedlichen Grenzen der pHZ und zu einer unterschiedlichen Abschätzung für die Anzahl der Planeten, die mit den entsprechenden Lebensformen besiedelt sein könnten. Dabei ergibt sich, dass komplex besiedelte Planeten heute etwa 100-mal seltener sein müssten als primitiv besiedelte.
This work is concerned with the spatio-temporal structures that emerge when non-identical, diffusively coupled oscillators synchronize. It contains analytical results and their confirmation through extensive computer simulations. We use the Kuramoto model which reduces general oscillatory systems to phase dynamics. The symmetry of the coupling plays an important role for the formation of patterns. We have studied the ordering influence of an asymmetry (non-isochronicity) in the phase coupling function on the phase profile in synchronization and the intricate interplay between this asymmetry and the frequency heterogeneity in the system. The thesis is divided into three main parts. Chapter 2 and 3 introduce the basic model of Kuramoto and conditions for stable synchronization. In Chapter 4 we characterize the phase profiles in synchronization for various special cases and in an exponential approximation of the phase coupling function, which allows for an analytical treatment. Finally, in the third part (Chapter 5) we study the influence of non-isochronicity on the synchronization frequency in continuous, reaction diffusion systems and discrete networks of oscillators.
Magnetorotational instability (MRI) is one of the most important and most common instabilities in astrophysics. Today it is widely accepted that it serves as a major source of turbulent viscosity in accretion disks, the most energy efficient objects in the universe. The importance of the MRI for astrophysics has been realized only in recent fifteen years. However, originally it was discovered much earlier, in 1959, in a very different context. Theoretical flow of a conducting liquid confined between differentially rotating cylinders in the presence of an external magnetic field was analyzed. The central conclusion is that the additional magnetic field parallel to the axis of rotation can destabilize otherwise stable flow. Theory of non-magnetized fluid motion between rotating cylinders has much longer history, though. It has been studied already in 1888 and today such setup is usually referred as a Taylor-Couette flow. To prove experimentally the existence of MRI in a magnetized Taylor-Couette flow is a demanding task and different MHD groups around the world try to achieve it. The main problem lies in the fact that laboratory liquid metals which are used in such experiments are characterized by small magnetic Prandtl number. Consequently rotation rates of the cylinders must be extremely large and vast amount of technical problems emerge. One of the most important difficulties is an influence of plates enclosing the cylinders in any experiment. For fast rotation the plates tend to dominate the whole flow and the MRI can not be observed. In this thesis we discuss a special helical configuration of the applied magnetic field which allows the critical rotation rates to be much smaller. If only the axial magnetic field is present, the cylinders must rotate with angular velocities corresponding to Reynolds numbers of order Re ≈ 10^6. With the helical field this number is dramatically reduced to Re ≈ 10^3. The azimuthal component of the magnetic field can be easily generated by letting an electric current through the axis of rotation, In a Taylor-Couette flow the (primary) instability manifests itself as Taylor vortices. The specific geometry of the helical magnetic field leads to a traveling wave solution and the vortices are drifting in a direction determined by rotation and the magnetic field. In an idealized study for infinitely long cylinders this is not a problem. However, if the cylinders have finite length and are bounded vertically by the plates the situation is different. In this dissertation it is shown, with use of numerical methods, that the traveling wave solution also exists for MHD Taylor-Couette flow at finite aspect ratio H/D, H being height of the cylinders, D width of the gap between them. The nonlinear simulations provide amplitudes of fluid velocity which are helpful in designing an experiment. Although the plates disturb the flow, parameters like the drift velocity indicate that the helical MRI operates in this case. The idea of the helical MRI was implemented in a very recent experiment PROMISE. The results provided, for the first time, an evidence that the (helical) MRI indeed exists. Nevertheless, the influence of the vertical endplates was evident and the experiment can be, in principle, improved. Exemplary methods of reduction of the end-effect are here proposed. Near the vertical boundaries develops an Ekman-Hartmann layer. Study of this layer for the MHD Taylor-Couette system as well as its impact on the global flow properties is presented. It is shown that the plates, especially if they are conducting, can disturb the flow far more then previously thought also for relatively slow rotation rates.
The solar tachocline is a thin transition layer between the solar radiative zone rotating uniformly and the solar convection zone, which has a mainly latitudinal differential rotation profile. This layer has a thickness of less than $0.05R_{\sun}$ and is subject to extreme radial as well as latitudinal shears. Helioseismological estimates put this layer at roughly $0.7R_{\sun}$. The tachocline mostly resides in the sub-adiabatic, non-turbulent radiative interior, except for a small overlap with the convection zone on the top. Many proposed dynamo mechanisms involve strong toroidal magnetic fields in this transition region. The exact mechanisms behind the formation of such a thin layer is still disputed. A very plausible mechanism is the one involving a weak, relic poloidal magnetic field trapped inside the radiative zone, which is responsible for expelling differential rotation outwards. This was first proposed by \citet{RK97}. The present work develops this idea with numerical simulations including additional effects like meridional circulation. It is shown that a relic field of 1~Gauss or smaller would be sufficient to explain the observed thickness of the tachocline. The stability of the solar tachocline is addressed as the next part of the problem. It is shown that the tachocline is stable up to a differential rotation of 52\% in the absence of magnetic fields. This is a new finding as compared to the earlier two dimensional models which estimated the solar differential rotation (about 28\%) to be marginally stable or even unstable. The changed stability limit is attributed to the changed stability criterion of the 3-dimensional model which also involves radial gradients of the angular velocity. In the presence of toroidal magnetic field belts, the lowest non-axisymmetric mode is shown to be the most unstable one for the radiative part of the tachocline. It is estimated that the tachocline would become unstable for toroidal fields exceeding about 100~Gauss. With both formation and stability questions satisfactorily addressed, this work presents the most comprehensive analysis of the physical processes in the solar tachocline to date.
The biological function and the technological applications of semiflexible polymers, such as DNA, actin filaments and carbon nanotubes, strongly depend on their rigidity. Semiflexible polymers are characterized by their persistence length, the definition of which is the subject of the first part of this thesis. Attractive interactions, that arise e.g.~in the adsorption, the condensation and the bundling of filaments, can change the conformation of a semiflexible polymer. The conformation depends on the relative magnitude of the material parameters and can be influenced by them in a systematic manner. In particular, the morphologies of semiflexible polymer rings, such as circular nanotubes or DNA, which are adsorbed onto substrates with three types of structures, are studied: (i) A topographical channel, (ii) a chemically modified stripe and (iii) a periodic pattern of topographical steps. The results are compared with the condensation of rings by attractive interactions. Furthermore, the bundling of two individual actin filaments, whose ends are anchored, is analyzed. This system geometry is shown to provide a systematic and quantitative method to extract the magnitude of the attraction between the filaments from experimentally observable conformations of the filaments.
Mass accretion onto compact objects through accretion disks is a common phenomenon in the universe. It is seen in all energy domains from active galactic nuclei through cataclysmic variables (CVs) to young stellar objects. Because CVs are fairly easy to observe, they provide an ideal opportunity to study accretion disks in great detail and thus help us to understand accretion also in other energy ranges. Mass accretion in these objects is often accompanied by mass outflow from the disks. This accretion disk wind, at least in CVs, is thought to be radiatively driven, similar to O star winds. WOMPAT, a 3-D Monte Carlo radiative transfer code for accretion disk winds of CVs is presented.
Giacconi et al. (1962) discovered a diffuse cosmic X-ray background with rocket experiments when they searched for lunar X-ray emission. Later satellite missions found a spectral peak in the cosmic X-ray background at ~30 keV. Imaging X-ray satellites such as ROSAT (1990-1999) were able to resolve up to 80% of the background below 2 keV into single point sources, mainly active galaxies. The cosmic X-ray background is the integration of all accreting super-massive (several million solar masses) black holes in the centre of active galaxies over cosmic time. Synthesis models need further populations of X-ray absorbed active galaxy nuclei (AGN) in order to explain the cosmic X-ray background peak at ~30 keV. Current X-ray missions such as XMM-Newton and Chandra offer the possibility of studying these additional populations. This Ph.D. thesis studies the populations that dominate the X-ray sky. For this purpose the 120 ksec XMM-Newton Marano field survey, named for an earlier optical quasar survey in the southern hemisphere, is analysed. Based on the optical follow-up observations the X-ray sources are spectroscopically classified. Optical and X-ray properties of the different X-ray source populations are studied and differences are derived. The amount of absorption in the X-ray spectra of type II AGN, which are considered as a main contributor to the X-ray background at ~30 keV, is determined. In order to extend the sample size of the rare type II AGN, this study also includes objects from another survey, the XMM-Newton Serendipitous Medium Sample. In addition, the dependence of the absorption in type II AGN with redshift and X-ray luminosity is analysed. We detected 328 X-ray sources in the Marano field. 140 sources were spectroscopically classified. We found 89 type I AGN, 36 type II AGN, 6 galaxies, and 9 stars. AGN, galaxies, and stars are clearly distinguishable by their optical and X-ray properties. Type I and II AGN do not separate clearly. They have a significant overlap in all studied properties. In a few cases the X-ray properties are in contradiction to the observed optical properties for type I and type II AGN. For example we find type II AGN that show evidence for optical absorption but are not absorbed in X-rays. Based on the additional use of near infra-red imaging (K-band), we were able to identify several of the rare type II AGN. The X-ray spectra of type II AGN from the XMM-Newton Marano field survey and the XMM-Newton Serendipitous Medium Sample were analysed. Since most of the sources have only ~40 X-ray counts in the XMM-Newton PN-detector, I carefully studied the fit results of simulated X-ray spectra as a function of fit statistic and binning method. The objects revealed only moderate absorption. In particular, I do not find any Compton-thick sources (absorbed by column densities of NH > 1.5 x 10^24 cm^−2). This gives evidence that type II AGN are not the main contributor of the X-ray background around 30 keV. Although bias effects may occur, type II AGN show no noticeable trend of the amount of absorption with redshift or X-ray luminosity.
Electron transfer phenomena in proteins represent one of the most common types of biochemical reactions. They play a central role in energy conversion pathways in living cells, and are crucial components in respiration and photosynthesis. These complex biochemical reaction cascades consist of a series of proteins and protein complexes that couple a charge transfer to different forms of chemical energy. The efficiency and sophisticated optimisation of signal transfer in these natural redox chains has inspired engineering of artificial architectures mimicking essential properties of their natural analogues. Implementation of direct electron transfer (DET) in protein assemblies was a breakthrough in bioelectronics, providing a simple and efficient way for coupling biological recognition events to a signal transducer. DET avoids the use of redox mediators, reducing potential interferences and side reactions, as well as being more compatible with in vivo conditions. However, only a few haem proteins, including the redox protein cytochrome c (cyt.c), and blue copper enzymes show efficient DET on different kinds of electrodes. Previous investigations with cyt.c have mainly focused on heterogeneous electron transfer of monolayers of this protein on gold. An important advance was the fabrication of cyt.c multilayers by electrostatic layer-by-layer self-assembly. The ease of fabrication, the stability, and the controllable permeability of polyelectrolyte multilayers have made them particularly attractive for electroanalytical applications. With cyt.c and sulfonated polyaniline it was for the first time possible that fully electro-active multilayers of the redox protein could be prepared. This approach was extended to design an analytical signal chain based on multilayers of cyt.c and xanthine oxidase (XOD). The system does not need an external mediator but relies on an in situ generation of a mediating radical and thus allows a signal transfer from hypoxanthine via the substrate converting enzyme and cyt.c to the electrode. Another kind of a signal chain is based on assembling proteins in complexes on electrodes in such a way that a direct protein-protein electron transfer becomes feasible. This design does not need a redox mediator in analogy to natural protein communication. For this purpose, cyt.c and the enzyme bilirubin oxidase (BOD, EC 1.3.3.5) are co-immobilized in a self-assembled polyelectrolyte multilayer on gold electrodes. Although these two proteins are not natural reaction partners, the protein architecture facilitates an electron transfer from the electrode via multiple protein layers to molecular oxygen resulting in a significant catalytic reduction current. Finally, we describe a novel strategy for multi-protein layer-by-layer self-assembly combining cyt.c with an enzyme sulfite oxidase (SOx) without use of any additional polymer. Electrostatic interactions between these two proteins with rather separated pI values during the assembly process from a low ionic strength buffer were found sufficient for the layer-by-layer deposition of the both biomolecules. It is anticipated that the concepts described in this work will stimulate further progress in multilayer design of even more complex biomimetic signal cascades taking advantage of direct communication between proteins.
In the present dissertation paper we study problems related to synchronization phenomena in the presence of noise which unavoidably appears in real systems. One part of the work is aimed at investigation of utilizing delayed feedback to control properties of diverse chaotic dynamic and stochastic systems, with emphasis on the ones determining predisposition to synchronization. Other part deals with a constructive role of noise, i.e. its ability to synchronize identical self-sustained oscillators. First, we demonstrate that the coherence of a noisy or chaotic self-sustained oscillator can be efficiently controlled by the delayed feedback. We develop the analytical theory of this effect, considering noisy systems in the Gaussian approximation. Possible applications of the effect for the synchronization control are also discussed. Second, we consider synchrony of limit cycle systems (in other words, self-sustained oscillators) driven by identical noise. For weak noise and smooth systems we proof the purely synchronizing effect of noise. For slightly different oscillators and/or slightly nonidentical driving, synchrony becomes imperfect, and this subject is also studied. Then, with numerics we show moderate noise to be able to lead to desynchronization of some systems under certain circumstances. For neurons the last effect means “antireliability” (the “reliability” property of neurons is treated to be important from the viewpoint of information transmission functions), and we extend our investigation to neural oscillators which are not always limit cycle ones. Third, we develop a weakly nonlinear theory of the Kuramoto transition (a transition to collective synchrony) in an ensemble of globally coupled oscillators in presence of additional time-delayed coupling terms. We show that a linear delayed feedback not only controls the transition point, but effectively changes the nonlinear terms near the transition. A purely nonlinear delayed coupling does not affect the transition point, but can reduce or enhance the amplitude of collective oscillations.
While there is strong evidence for clumping in the winds of massive hot stars, very little is known about clumping in the winds from Central Stars. We have checked [WC]-type CSPN winds for clumping by inspecting the electron-scattering line wings. At least for three stars we found indications for wind inhomogeneities.
Clumps in hot star winds can originate from shock compression due to the line driven instability. One-dimensional hydrodynamic simulations reveal a radial wind structure consisting of highly compressed shells separated by voids, and colliding with fast clouds. Two-dimensional simulations are still largely missing, despite first attempts. Clumpiness dramatically affects the radiative transfer and thus all wind diagnostics in the UV, optical, and in X-rays. The microturbulence approximation applied hitherto is currently superseded by a more sophisticated radiative transfer in stochastic media. Besides clumps, i.e. jumps in the density stratification, so-called kinks in the velocity law, i.e. jumps in dv/dr, play an eminent role in hot star winds. Kinks are a new type of radiative-acoustic shock, and propagate at super-Abbottic speed.
Modeling expanding atmospheres is a difficult task because of the extreme non-LTE situation, the need to account for complex model atoms, especially for the iron-group elements with their millions of lines, and because of the supersonic expansion. Adequate codes have been developed e.g. by Hillier (CMFGEN), the Munich group (Puls, Pauldrach), and in Potsdam (PoWR code, Hamann et al.). While early work was based on the assumption of a smooth and homogeneous spherical stellar wind, the need to account for clumping became obvious about ten years ago. A relatively simple first-order clumping correction was readily implemented into the model codes. However, its simplifying assumptions are severe. Most importantly, the clumps are taken to be optically thin at all frequencies (”microclumping”). We discuss the consequences of this approximation and describe an approach to account for optically thick clumps (“macroclumping”). First results demonstrate that macroclumping can generally reduce the strength of spectral features, depending on their optical thickness. The recently reported discrepancy between the Hα diagnostic and the Pv resonance lines in O star spectra can be resolved without decreasing the mass-loss rates, when macroclumping is taken into account.
X-ray spectroscopy is a sensitive probe of stellar winds. X-rays originate from optically thin shock-heated plasma deep inside the wind and propagate outwards throughout absorbing cool material. Recent analyses of the line ratios from He-like ions in the X-ray spectra of O-stars highlighted problems with this general paradigm: the measured line ratios of highest ions are consistent with the location of the hottest X-ray emitting plasma very close to the base of the wind, perhaps indicating the presence of a corona, while measurements from lower ions conform with the wind-embedded shock model. Generally, to correctly model the emerging Xray spectra, a detailed knowledge of the cool wind opacities based on stellar atmosphere models is prerequisite. A nearly grey stellar wind opacity for the X-rays is deduced from the analyses of high-resolution X-ray spectra. This indicates that the stellar winds are strongly clumped. Furthermore, the nearly symmetric shape of X-ray emission line profiles can be explained if the wind clumps are radially compressed. In massive binaries the orbital variations of X-ray emission allow to probe the opacity of the stellar wind; results support the picture of strong wind clumping. In high-mass X-ray binaries, the stochastic X-ray variability and the extend of the stellar-wind part photoionized by X-rays provide further strong evidence that stellar winds consist of dense clumps.
Stellar winds play an important role for the evolution of massive stars and their cosmic environment. Multiple lines of evidence, coming from spectroscopy, polarimetry, variability, stellar ejecta, and hydrodynamic modeling, suggest that stellar winds are non-stationary and inhomogeneous. This is referred to as 'wind clumping'. The urgent need to understand this phenomenon is boosted by its far-reaching implications. Most importantly, all techniques to derive empirical mass-loss rates are more or less corrupted by wind clumping. Consequently, mass-loss rates are extremely uncertain. Within their range of uncertainty, completely different scenarios for the evolution of massive stars are obtained. Settling these questions for Galactic OB, LBV and Wolf-Rayet stars is prerequisite to understanding stellar clusters and galaxies, or predicting the properties of first-generation stars. In order to develop a consistent picture and understanding of clumped stellar winds, an international workshop on 'Clumping in Hot Star Winds' was held in Potsdam, Germany, from 18. - 22. June 2007. About 60 participants, comprising almost all leading experts in the field, gathered for one week of extensive exchange and discussion. The Scientific Organizing Committee (SOC) included John Brown (Glasgow), Joseph Cassinelli (Madison), Paul Crowther (Sheffield), Alex Fullerton (Baltimore), Wolf-Rainer Hamann (Potsdam, chair), Anthony Moffat (Montreal), Stan Owocki (Newark), and Joachim Puls (Munich). These proceedings contain the invited and contributed talks presented at the workshop, and document the extensive discussions.
The role played by azobenzene polymers in the modern photonic, electronic and opto-mechanical applications cannot be underestimated. These polymers are successfully used to produce alignment layers for liquid crystalline fluorescent polymers in the display and semiconductor technology, to build waveguides and waveguide couplers, as data storage media and as labels in quality product protection. A very hot topic in modern research are light-driven artificial muscles based on azobenzene elastomers. The incorporation of azobenzene chromophores into polymer systems via covalent bonding or even by blending gives rise to a number of unusual effects under visible (VIS) and ultraviolet light irradiation. The most amazing effect is the inscription of surface relief gratings (SRGs) onto thin azobenzene polymer films. At least seven models have been proposed to explain the origin of the inscribing force but none of them describes satisfactorily the light induced material transport on the molecular level. In most models, to explain the mass transport over micrometer distances during irradiation at room temperature, it is necessary to assume a considerable degree of photoinduced softening, at least comparable with that at the glass transition. Contrary to this assumption, we have gathered a convincing evidence that there is no considerable softening of the azobenzene layers under illumination. Presently we can surely say that light induced softening is a very weak accompanying effect rather than a necessary condition for the formation of SRGs. This means that the inscribing force should be above the yield point of the azobenzene polymer. Hence, an appropriate approach to describe the formation and relaxation of SRGs is a viscoplastic theory. It was used to reproduce pulse-like inscription of SRGs as measured by VIS light scattering. At longer inscription times the VIS scattering pattern exhibits some peculiarities which can be explained by the appearance of a density grating that will be shown to arise due to the final compressibility of the polymer film. As a logical consequence of the aforementioned research, a thermodynamic theory explaining the light-induced deformation of free standing films and the formation of SRGs is proposed. The basic idea of this theory is that under homogeneous illumination an initially isotropic sample should stretch itself along the polarization direction to compensate the entropy decrease produced by the photoinduced reorientation of azobenzene chromophores. Finally, some ideas about further development of this controversial topic will be discussed.
In biological cells, the long-range intracellular traffic is powered by molecular motors which transport various cargos along microtubule filaments. The microtubules possess an intrinsic direction, having a 'plus' and a 'minus' end. Some molecular motors such as cytoplasmic dynein walk to the minus end, while others such as conventional kinesin walk to the plus end. Cells typically have an isopolar microtubule network. This is most pronounced in neuronal axons or fungal hyphae. In these long and thin tubular protrusions, the microtubules are arranged parallel to the tube axis with the minus ends pointing to the cell body and the plus ends pointing to the tip. In such a tubular compartment, transport by only one motor type leads to 'motor traffic jams'. Kinesin-driven cargos accumulate at the tip, while dynein-driven cargos accumulate near the cell body. We identify the relevant length scales and characterize the jamming behaviour in these tube geometries by using both Monte Carlo simulations and analytical calculations. A possible solution to this jamming problem is to transport cargos with a team of plus and a team of minus motors simultaneously, so that they can travel bidirectionally, as observed in cells. The presumably simplest mechanism for such bidirectional transport is provided by a 'tug-of-war' between the two motor teams which is governed by mechanical motor interactions only. We develop a stochastic tug-of-war model and study it with numerical and analytical calculations. We find a surprisingly complex cooperative motility behaviour. We compare our results to the available experimental data, which we reproduce qualitatively and quantitatively.
Im Rahmen der vorliegenden Arbeit ist es erstmals gelungen, mit einem ps-Pumplaser (10 ps) Weißlicht mit einer spektralen Breite von mehr als einer optischen Oktave in einer mikrostrukturierten Faser (MSF) bei einer Pumpwellenlänge von 1064 nm zu generieren. Es ließ sich, abgesehen von nichtkonvertierten Resten der Pumpstrahlung, ein unstrukturiertes und zeitlich stabiles Weißlichtspektrum von 700 nm bis 1650 nm generieren. Die maximale Ausgangsleistung dieser Weißlichtstrahlung betrug 3,1 W. Es konnten sehr gute Einkoppeleffizienzen von maximal 62 % erzielt werden. Die an der Weißlichterzeugung beteiligten dispersiven und nichtlinear optischen Effekte, wie z.B. Selbstphasenmodulation, Vierwellenmischung, Modulationsinstabilitäten oder Solitoneneffekte, werden detailliert theoretisch untersucht und erläutert. Die Arbeit beinhaltet ebenfalls eine umfangreiche Beschreibung der Wirkungsweise und Eigenschaften von mikrostrukturierten Fasern mit einem festen Faserkern. Aufgrund der großen Variationsvielfalt des mikrostrukturierten Fasermantels und der damit verbundenen Wellenleitereigenschaften ergeben sich, insbesondere für die Anwendung in der nichtlinearen Optik, eine Reihe von interessanten Eigenschaften. Es wurden insgesamt vier verschiedene mikrostrukturierte Fasern experimentell untersucht. Für die Interpretation der experimentellen Ergebnisse ist die Pulsausbreitung der ps-Pumppulse in einer dispersiven, nichtlinear optischen Faser anhand der verallgemeinerten nichtlinearen Schrödinger-Gleichung berechnet worden. Durch einen Vergleich der Berechnungen mit den Messdaten ließen sich verstärkte Modulationsinstabilitäten und verschiedene Solitoneneffekte als hauptsächlich für die Weißlichterzeugung bei ps-Anregungspulsen verantwortlich identifizieren. Auf der Basis der durchgeführten Untersuchungen wurde in Kooperation mit der Fa. Jenoptik Laser, Optik, Systeme GmbH eine kompakte und leistungsstarke Weißlichtquelle entwickelt. Diese wurde erfolgreich in einer Kohärenztomographiemessung (Optical Coherence Tomography - OCT) getestet: Es konnte in ex vivo-Untersuchungen gezeigt werden, dass sich mit dieser ps-Weißlichtquelle eine hohe Eindringtiefe von ca. 400 µm in die Netzhaut eines Affen erreichen lässt.
Recently, several faint ringlets in the Saturnian ring system were found to maintain a peculiar orientation relative to Sun. The Encke gap ringlets as well as the ringlet in the outer rift of the Cassini division were found to have distinct spatial displacements of several tens of kilometers away from Saturn towards Sun, referred to as heliotropicity (Hedman et al., 2007). This is quite exceptional, since dynamically one would expect eccentric features in the Saturnian rings to precess around Saturn over periods of months. In our study we address this exceptional behavior by investigating the dynamics of circumplanetary dust particles with sizes in the range of 1-100 µm. These small particles are perturbed by non-gravitational forces, in particular, solar radiation pres- sure, Lorentz force, and planetary oblateness, on time-scales of the order of days. The combined influences of these forces cause periodical evolutions of grains’ orbital ec- centricities as well as precession of their pericenters, which can be shown by secular perturbation theory. We show that this interaction results in a stationary eccentric ringlet, oriented with its apocenter towards the Sun, which is consistent with obser- vational findings. By applying this heliotropic dynamics to the central Encke gap ringlet, we can give a limit for the expected smallest grain size in the ringlet of about 8.7 microns, and constrain the minimal lifetime to lie in the order of months. Furthermore, our model matches fairly well the observed ringlet eccentricity in the Encke gap, which supports recent estimates on the size distribution of the ringlet material (Hedman et al., 2007). The ringlet-width however, that results from our modeling based on heliotropic dynamics, slightly overestimates the observed confined ringlet-width by a factor of 3 to 10, depending on the width-measure being used. This is indicative for mechanisms, not included in the heliotropic model, which potentially confine the ringlet to its observed width, including shepherding and scattering by embedded moonlets in the ringlet region. Based on these results, early investigations (Cuzzi et al., 1984, Spahn and Wiebicke, 1989, Spahn and Sponholz, 1989), and recent work that has been published on the F ring (Murray et al., 2008) - to which the Encke gap ringlets are found to share similar morphological structures - we model the maintenance of the central ringlet by embedded moonlets. These moonlets, believed to have sizes of hundreds of meters across, release material into space, which is eroded by micrometeoroid bombardment (Divine, 1993). We further argue that Pan - one of Saturn’s moons, which shares its orbit with the central ringlet of the Encke gap - is a rather weak source of ringlet material that efficiently confines the ringlet sources (moonlets) to move on horseshoe-like orbits. Moreover, we suppose that most of the narrow heliotropic ringlets are fed by a moonlet population, which is held together by the largest member to move on horseshoe-like orbits. Modeling the equilibrium between particle source and sinks with a primitive balance equation based on photometric observations (Porco et al., 2005), we find the minimal effective source mass of the order of 3 · 10-2MPan, which is needed to keep the central ringlet from disappearing.
In the present dissertation paper an approach which ensures an efficient control of such diverse systems as noisy or chaotic oscillators and neural ensembles is developed. This approach is implemented by a simple linear feedback loop. The dissertation paper consists of two main parts. One part of the work is dedicated to the application of the suggested technique to a population of neurons with a goal to suppress their synchronous collective dynamics. The other part is aimed at investigating linear feedback control of coherence of a noisy or chaotic self-sustained oscillator. First we start with a problem of suppressing synchronization in a large population of interacting neurons. The importance of this task is based on the hypothesis that emergence of pathological brain activity in the case of Parkinson's disease and other neurological disorders is caused by synchrony of many thousands of neurons. The established therapy for the patients with such disorders is a permanent high-frequency electrical stimulation via the depth microelectrodes, called Deep Brain Stimulation (DBS). In spite of efficiency of such stimulation, it has several side effects and mechanisms underlying DBS remain unclear. In the present work an efficient and simple control technique is suggested. It is designed to ensure suppression of synchrony in a neural ensemble by a minimized stimulation that vanishes as soon as the tremor is suppressed. This vanishing-stimulation technique would be a useful tool of experimental neuroscience; on the other hand, control of collective dynamics in a large population of units represents an interesting physical problem. The main idea of suggested approach is related to the classical problem of oscillation theory, namely the interaction between a self-sustained (active) oscillator and a passive load (resonator). It is known that under certain conditions the passive oscillator can suppress the oscillations of an active one. In this thesis a much more complicated case of active medium, which itself consists of thousands of oscillators is considered. Coupling this medium to a specially designed passive oscillator, one can control the collective motion of the ensemble, specifically can enhance or suppress it. Having in mind a possible application in neuroscience, the problem of suppression is concentrated upon. Second, the efficiency of suggested suppression scheme is illustrated by considering more complex case, i.e. when the population of neurons generating the undesired rhythm consists of two non-overlapping subpopulations: the first one is affected by the stimulation, while the collective activity is registered from the second one. Generally speaking, the second population can be by itself both active and passive; both cases are considered here. The possible applications of suggested technique are discussed. Third, the influence of the external linear feedback on coherence of a noisy or chaotic self-sustained oscillator is considered. Coherence is one of the main properties of self-oscillating systems and plays a key role in the construction of clocks, electronic generators, lasers, etc. The coherence of a noisy limit cycle oscillator in the context of phase dynamics is evaluated by the phase diffusion constant, which is in its turn proportional to the width of the spectral peak of oscillations. Many chaotic oscillators can be described within the framework of phase dynamics, and, therefore, their coherence can be also quantified by the way of the phase diffusion constant. The analytical theory for a general linear feedback, considering noisy systems in the linear and Gaussian approximation is developed and validated by numerical results.
Die Arbeit beschreibt die Analyse von Beobachtungen zweier Sonnenflecken in zweidimensionaler Spektro-Polarimetrie. Die Daten wurden mit dem Fabry-Pérot-Interferometer der Universität Göttingen am Vakuum-Turm-Teleskop auf Teneriffa erfasst. Von der aktiven Region NOAA 9516 wurde der volle Stokes-Vektor des polarisierten Lichts in der Absorptionslinie bei 630,249 nm in Einzelaufnahmen beobachtet, und von der aktiven Region NOAA 9036 wurde bei 617,3 nm Wellenlänge eine 90-minütige Zeitserie des zirkular polarisierten Lichts aufgezeichnet. Aus den reduzierten Daten werden Ergebniswerte für Intensität, Geschwindigkeit in Beobachtungsrichtung, magnetische Feldstärke sowie verschiedene weitere Plasmaparameter abgeleitet. Mehrere Ansätze zur Inversion solarer Modellatmosphären werden angewendet und verglichen. Die teilweise erheblichen Fehlereinflüsse werden ausführlich diskutiert. Das Frequenzverhalten der Ergebnisse und Abhängigkeiten nach Ort und Zeit werden mit Hilfe der Fourier- und Wavelet-Transformation weiter analysiert. Als Resultat lässt sich die Existenz eines hochfrequenten Bandes für Geschwindigkeitsoszillationen mit einer zentralen Frequenz von 75 Sekunden (13 mHz) bestätigen. In größeren photosphärischen Höhen von etwa 500 km entstammt die Mehrheit der damit zusammenhängenden Schockwellen den dunklen Anteilen der Granulen, im Unterschied zu anderen Frequenzbereichen. Die 75-Sekunden-Oszillationen werden ebenfalls in der aktiven Region beobachtet, vor allem in der Lichtbrücke. In den identifizierten Bändern oszillatorischer Power der Geschwindigkeit sind in einer dunklen, penumbralen Struktur sowie in der Lichtbrücke ausgeprägte Strukturen erkennbar, die sich mit einer Horizontalgeschwindigkeit von 5-8 km/s in die ruhige Sonne bewegen. Diese zeigen einen deutlichen Anstieg der Power, vor allem im 5-Minuten-Band, und stehen möglicherweise in Zusammenhang mit dem Phänomen der „Evershed-clouds“. Eingeschränkt durch ein sehr geringes Signal-Rausch-Verhältnis und hohe Fehlereinflüsse werden auch Magnetfeldvariationen mit einer Periode von sechs Minuten am Übergang von Umbra zu Penumbra in der Nähe einer Lichtbrücke beobachtet. Um die beschriebenen Resultate zu erzielen, wurden bestehende Visualisierungsverfahren der Frequenzanalyse verbessert oder neu entwickelt, insbesondere für Ergebnisse der Wavelet-Transformation.
Stellar magnetic fields, as a crucial component of star formation and evolution, evade direct observation at least with current and near future instruments. However investigating whether magnetic fields are generated by a dynamo process or represent relics from the formation process, or whether they show a behavior similar to the sun or something very different, it is essential to investigate their structure and temporal evolution. Fortunately nature provides us with the possibility to indirectly observe surface topologies on distant stars by means of Doppler shift and polarization of light, though not without its challenges. Based on the mentioned effects, the so called Zeeman-Doppler Imaging technique is a powerful method to retrieve magnetic fields from rapid rotating stars based on measurements of spectropolarimetric observations in terms of Stokes profiles. In recent years, a large number of stellar magnetic field distributions could be reconstructed by Zeeman-Doppler Imaging (ZDI). However, the implementation of this method often relies on many approximations because, as an inversion method, it entails enormous computational requirements. The aim of this thesis is to develop methods for a ZDI, designed to invert time-resolved spectropolarimetric data of active late type stars, and to account for the expected complex and small scale magnetic fields on these stars. In order to reliably reconstruct the detailed field orientation and strength, the inversion method is employed to be able to use of all four Stokes components. Furthermore it is based on fully polarized radiative transfer calculations to account for the intricate interplay between temperature and magnetic field. Finally, the application of a newly developed ZDI code to Stokes I and V observations of II Pegasi (short: II Peg) was supposed to deliver the first magnetic surface maps for this highly active star. To accomplish the high computational burden of a radiative transfer based ZDI, we developed a novel approximation method to speed up the inversion process. It is based on Principal Component Analysis and Artificial Neural Networks. The latter approximate the functional mapping between atmospheric parameters and the corresponding local Stokes profiles. Inverse problems, as we are dealing with, are potentially ill-posed and require a regularization method. We propose a new regularization scheme, which implements a local entropy function that accounts for the peculiarities of the reconstruction of localized magnetic fields. To deal with the relatively large noise that is always present in polarimetric data, we developed a multi-line denoising technique based on Principal Component Analysis. In contrast to other multi-line techniques that extract from a large number of spectral lines a sort of mean profile, this method allows to extract individual spectral lines and thus allows for an inversion on the basis of specific lines. All these methods are incorporated in our newly developed ZDI code iMap, which is based on a conjugated gradient method. An in depth validation of our new synthesis method demonstrates the reliability and accuracy of this approach as well as a gain in computation time by almost three orders of magnitude relative to the conventional radiative transfer calculations. We investigated the influence of the different Stokes components (IV / IVQU) on the ability to reconstruct a known synthetic field configuration. In doing so we validate the capability of our inversion code, and we also assess limitations of magnetic field inversions in general. In a first application to II Peg, a K2 IV subgiant, we derived temperature and magnetic field surface distributions from spectropolarimetric data obtained in 2004 and 2007. It gives for the first time simultaneously the temporal evolution of the surface temperature and magnetic field distribution on II Peg.
The Sun is a star, which due to its proximity has a tremendous influence on Earth. Since its very first days mankind tried to "understand the Sun", and especially in the 20th century science has uncovered many of the Sun's secrets by using high resolution observations and describing the Sun by means of models. As an active star the Sun's activity, as expressed in its magnetic cycle, is closely related to the sunspot numbers. Flares play a special role, because they release large energies on very short time scales. They are correlated with enhanced electromagnetic emissions all over the spectrum. Furthermore, flares are sources of energetic particles. Hard X-ray observations (e.g., by NASA's RHESSI spacecraft) reveal that a large fraction of the energy released during a flare is transferred into the kinetic energy of electrons. However the mechanism that accelerates a large number of electrons to high energies (beyond 20 keV) within fractions of a second is not understood yet. The thesis at hand presents a model for the generation of energetic electrons during flares that explains the electron acceleration based on real parameters obtained by real ground and space based observations. According to this model photospheric plasma flows build up electric potentials in the active regions in the photosphere. Usually these electric potentials are associated with electric currents closed within the photosphere. However as a result of magnetic reconnection, a magnetic connection between the regions of different magnetic polarity on the photosphere can establish through the corona. Due to the significantly higher electric conductivity in the corona, the photospheric electric power supply can be closed via the corona. Subsequently a high electric current is formed, which leads to the generation of hard X-ray radiation in the dense chromosphere. The previously described idea is modelled and investigated by means of electric circuits. For this the microscopic plasma parameters, the magnetic field geometry and hard X-ray observations are used to obtain parameters for modelling macroscopic electric components, such as electric resistors, which are connected with each other. This model demonstrates that such a coronal electric current is correlated with large scale electric fields, which can accelerate the electrons quickly up to relativistic energies. The results of these calculations are encouraging. The electron fluxes predicted by the model are in agreement with the electron fluxes deduced from the measured photon fluxes. Additionally the model developed in this thesis proposes a new way to understand the observed double footpoint hard X-ray sources.
Computational cosmology
(2008)
“Computational Cosmology” is the modeling of structure formation in the Universe by means of numerical simulations. These simulations can be considered as the only “experiment” to verify theories of the origin and evolution of the Universe. Over the last 30 years great progress has been made in the development of computer codes that model the evolution of dark matter (as well as gas physics) on cosmic scales and new research discipline has established itself. After a brief summary of cosmology we will introduce the concepts behind such simulations. We further present a novel computer code for numerical simulations of cosmic structure formation that utilizes adaptive grids to efficiently distribute the work and focus the computing power to regions of interests, respectively. In that regards we also investigate various (numerical) effects that influence the credibility of these simulations and elaborate on the procedure of how to setup their initial conditions. And as running a simulation is only the first step to modelling cosmological structure formation we additionally developed an object finder that maps the density field onto galaxies and galaxy clusters and hence provides the link to observations. Despite the generally accepted success of the cold dark matter cosmology the model still inhibits a number of deviations from observations. Moreover, none of the putative dark matter particle candidates have yet been detected. Utilizing both the novel simulation code and the halo finder we perform and analyse various simulations of cosmic structure formation investigating alternative cosmologies. These include warm (rather than cold) dark matter, features in the power spectrum of the primordial density perturbations caused by non-standard inflation theories, and even modified Newtonian dynamics. We compare these alternatives to the currently accepted standard model and highlight the limitations on both sides; while those alternatives may cure some of the woes of the standard model they also inhibit difficulties on their own. During the past decade simulation codes and computer hardware have advanced to such a stage where it became possible to resolve in detail the sub-halo populations of dark matter halos in a cosmological context. These results, coupled with the simultaneous increase in observational data have opened up a whole new window on the concordance cosmogony in the field that is now known as “Near-Field Cosmology”. We will present an in-depth study of the dynamics of subhaloes and the development of debris of tidally disrupted satellite galaxies.1 Here we postulate a new population of subhaloes that once passed close to the centre of their host and now reside in the outer regions of it. We further show that interactions between satellites inside the radius of their hosts may not be negliable. And the recovery of host properties from the distribution and properties of tidally induced debris material is not as straightforward as expected from simulations of individual satellites in (semi-)analytical host potentials.
Supernovae are known to be the dominant energy source for driving turbulence in the interstellar medium. Yet, their effect on magnetic field amplification in spiral galaxies is still poorly understood. Analytical models based on the uncorrelated-ensemble approach predicted that any created field will be expelled from the disk before a significant amplification can occur. By means of direct simulations of supernova-driven turbulence, we demonstrate that this is not the case. Accounting for vertical stratification and galactic differential rotation, we find an exponential amplification of the mean field on timescales of 100Myr. The self-consistent numerical verification of such a “fast dynamo” is highly beneficial in explaining the observed strong magnetic fields in young galaxies. We, furthermore, highlight the importance of rotation in the generation of helicity by showing that a similar mechanism based on Cartesian shear does not lead to a sustained amplification of the mean magnetic field. This finding impressively confirms the classical picture of a dynamo based on cyclonic turbulence.