Refine
Has Fulltext
- no (98)
Year of publication
- 2009 (98) (remove)
Document Type
- Article (98) (remove)
Language
- English (98) (remove)
Is part of the Bibliography
- yes (98)
Institute
- Institut für Chemie (98) (remove)
Arenes with various alkyl side-chains were synthesized in high yields and excellent regioselectivities. Starting from toluic and naphthoic acids, the carboxylate group was conveniently substituted by alkyl halides by Birch reduction and subsequent decarbonylation. The method is characterized by inexpensive starting materials and reagents, and methylation of arenes was realized. Besides simple alkyl substituents, the scope of arene functionalization was extended by benzyl, fluoro, amino, and ester groups. We were able to control the alkylation of 1-naphthoic acid during Birch reduction by the addition of tert-butanol. This allowed the regioselective synthesis of mono and bis-substituted naphthalenes from the same starting material.
Molecular modeling calculations using DFT at the B3LYP/6-31G(d,p) level of theory have been performed on diastereomeric complexes formed between chiral carboxylate anions and chiral urea receptors, a combination previously demonstrated to enable enantiodifferentiation by electrochemical sensing. The calculations correctly predicted the stability order of the enantiomers in acetonitrile solution when the distinction between the enantiomers was above the declared threshold reliability value of 1 kcal mol;1 for computations at this level of theory. Thus, the calculations can not only be applied to predict the likely success of undertakings using the analytical method, it can also, provided ;E is sufficient, potentially be used to determine the absolute configuration of chiral analytes with at least the racemate in hand. The previously successful enantiodifferentiations of various amino acids and alcohols using chiral ion mobility spectroscopy (CIMS) with (S)-2-butanol as the chiral selector were also evaluated by DFT calculations. The calculations again correctly predicted the stability order of the enantiomers when the calculated ;E was above the threshold value though cases not providing a value for ;E above the threshold value was problematic for this system. Attempts to address this shortcoming included an expanded conformational evaluation, a broader analytical approach, and an extended basis set.
A new pterocarpan (named 8-methoxyneorautenol) was isolated from the acetone ext. of the root bark of Erythrina abyssinica. In addn., the known isoflavonoid derivs. eryvarin L, erycristagallin and shinpterocarpin were identified for the first time from the roots of this plant. The structures were detd. on the basis of spectroscopic evidence. The new compd. showed selective antimicrobial activity against Trichophyton mentagrophytes. The acetone ext. of the root bark of E. abyssinica showed radical scavenging activity towards 2,2-diphenyl-1-picrylhydrazyl radical (DPPH). The pterocarpenes, 3-hydroxy-9-methoxy-10-(3,3-dimethylallyl)pterocarpene and erycristagallin, were the most active constituents of the roots of this plant and showing dose-dependent activities similar to that of the std. quercetin. [on SciFinder (R)]
The epoxy system containing diglycidyl ether of bisphenol A and 4,4'-diaminodiphenyl sulfone is modified with poly(acrylonitrile-butadiene-styrene) (ABS) to explore the effects of the ABS content on the phase morphology, mechanism of phase separation, and viscoelastic properties. The amount of ABS in the blends was 5, 10, 15, and 20 parts per hundred of epoxy resin (phr). Transmission electron microscopy (TEM) and scanning electron microscopy (SEM) were employed to investigate the final morphology of ABS-modified epoxy blends. Scanning electron microscopic studies of 15 phr ABS-modified epoxy blends reveal a bicontinuous structure in which both epoxy and ABS are continuous, with substructures of the ABS phase dispersed in the continuous epoxy phase and substructures of the epoxy phase dispersed in the continuous ABS phase. TEM micrographs of 15 phr ABS-modified epoxy blends confirm the results observed by SEM. TEM micrographs reveal the existence of nanosubstructures of ABS in 20 phr ABS-modified epoxy blends. To the best of our knowledge, to date, nanosubstructures have never been reported in any epoxy/thermoplastic blends. The influence of the concentration of the thermoplastic on the generated morphology as analyzed by SEM and TEM was explained in detail. The evolution and mechanism of phase separation was investigated in detail by optical microscopy (OM) and small-angle laser light scattering (SALLS). At concentrations lower than 10 phr the system phase separates through nucleation and growth (NG). However, at higher concentrations, 15 and 20 phr, the blends phase separate through both NG and spinodal decomposition mechanisms. On the basis of OM and SALLS, we conclude that the phenomenon of complex substructure formation in dynamic asymmetric blends is due to the combined effect of hydrodynamics and viscoelasticity. Additionally, dynamic mechanical analysis was carried out to evaluate the viscoelastic behavior of the cross-linked epoxy/ABS blends. Finally, apparent weight fractions of epoxy and ABS components in epoxy- and ABS-rich phases were evaluated from T-g analysis.
This work is focused on the influence of an ionic liquid (IL), i.e. ethyl-methylimidazolium hexylsulfate, on the spontaneous formation of microemulsions with ionic surfactants. The influence of the ionic liquid on Structure formation in the optically clear phase region in water/toluene/pentanol mixtures in presence of the cationic surfactant CTAB was studied in more detail. The results show a significant increase of the transparent phase region by adding the ionic liquid. Conductometric investigations demonstrate that adding the ionic liquid can drastically reduce the droplet- droplet interactions in the L-2 phase. H-1 nuclear magnetic resonance (H-1 NMR) diffusion coefficient measurements in combination with dynamic light scattering measurements clearly show that inverse microemulsion droplets still exist, but the droplet size is decreased to 2 nm. A more detailed characterisation of the isotropic phase channel by means of conductivity measurements, dynamic light scattering (DLS), H-1 NMR and cryo-scanning electron microscopy (SEM), allows the identification of a bicontinuous sponge phase between the L-1 and L-2 phase. When the poly(ethyleneimine) is added, the isotropic phase range is reduced drastically, but the inverse microemulsion range still exists.
Polymer-modified bicontinuous microemulsions used as a template for the formation of nanorods
(2009)
This article is focused on the characterization of the poly(ethylene glycol) (PEG)-induced bicontinuous microemulsion of the pseudo-ternary system sodium dodecylsulfate (SDS)/xylene-pentanol/water by means of differential scanning calorimetry, rheology, and conductometry. The influence of the polymer concentration (cp) and the molecular weight (Mw) on the microstructure of the microemulsion was investigated using Cryo scanning electron microscopy. It was found that an increase of cp influences the structure of the sponge-like phase significantly. These polymer-modified microemulsions can be used as a template phase for the formation of BaSO4 nanorods, where individual nanoparticles (5nm in size) are ordered along the polymer backbone.
C-13 chemical shifts of alkynes, published to date, were computed at the DFT (B3LYP/6-311G*) level of theory and compared with the experimental delta values, and the agreement was employed as a measure of quality for the underlying structures. For the corresponding global minima structures, thus obtained, the occupation quotients of antibonding pi* and bonding pi orbitals (pi*(C C)/pi(C C)) and the bond lengths (d(C C)) of the central C C triple bond were computed and correlated to each other. The linear dependence obtained for the two push-pull parameters d(C C) and pi*(C C)/pi(C C) quantifies changes in the push-pull effect of substituents while deviations from the best line of fit indicate and ascertain quantitatively to what extend the inductive (+/-l) substituent effect changes with respect to the bond length of the C C triple bond.
The effect of the exocyclic conjugation, via d;p orbital interaction and/or negative hyperconjugation (anomeric effect) of the N;S bond, on the inversion of the morpholine ring in some N-arylsulfonyl morpholines is studied by variable-temperature 1H NMR spectroscopy in different solvents. The observed free energy barriers are 9.2;10.3 kcal mol;1; the lower values were obtained with increasing conjugation (substituents of higher electron withdrawing power) along the series. The barrier to ring inversion of 1e was solvent independent. X-ray data of compounds 1b,d reveal the chair conformation of the six-membered ring, the flattened pyramidal orientation of the ring nitrogen atom, and the sulfonyl group in equatorial position with the plane containing the Caryl;S;N bond perpendicular to the plane of the benzene ring. In addition, the sulfonamide group prefers a conformation with the S;C bond antiperiplanar with respect to the nitrogen atom lone pair and the ;CH2;N;CH2; moieties in staggered conformation with the S;O bonds of the SO2 group.
The push,pull effect in two series of disubstituted alkynes was studied at the DFT level [B3LYP/6-311G(d)] by application of the 13C chemical shift differences (GIAO) between the alkyne carbon atoms (Delta delta (C C)), the charge difference between these carbons (Delta q(C C)), the occupation quotient (NBO) of anti-bonding pi*, and bonding pi orbitals (pi*(C C)/pi(C C)) and the bond length (d(C C)) of the C C triple bond. The linear dependence of d(C C) versus pi*(C C)/pi(C C) quantifies changes in the push,pull effect while deviations from the latter correlation indicate and ascertain quantitatively to what extent steric hindrance restricts the strain-less conjugation of the C C triple bond pi- orbitals in the disubstituted alkynes.
Quinoxalines XV : convenient synthesis and structural study of pyrazolo[1,5-alpha]quinoxalines
(2009)
A series of aryloxymethylquinoxaline oximes, hitherto unknown and synthesized from the corresponding aldehydes, afforded in only one step pyrazolo[1,5-;]quinoxalines in the presence of acetic anhydride at high temperatures. A formal [3,5]-sigmatropic rearrangement was proposed as the mechanistic rationale for this unprecedented transformation. Saponification with potassium hydroxide furnished the free phenol derivatives which were studied by NMR spectroscopy and accompanying theoretical DFT calculations, establishing intramolecular hydrogen bonding and the spatial magnetic properties. Additionally, mass spectrometric fragmentation was investigated by B/E-linked scans and collision-induced dissociation experiments. The fragmentation pattern devoted a new gas phase rearrangement process, which proved to be unique and characteristic for pyrazolo[1,5-;]quinoxalines.
Cyanine dyes have become widely used fluorescence labels in clinical and biological chemistry. In particular, cyanine dyes with excitation wavelengths lambda(ex) > 600 nm are often used in biological applications. However, aggregation behavior and matrix effects on cyanine fluorescence are not fully understood yet and interfere with the data interpretation. In this study, we analyzed the spectroscopic characteristics of a model system consisting of the biotinylated cyanine dyes DY-635 and DY-647 and their streptavidin conjugates. On the basis of the spectroscopic data, the interaction processes between cyanine dye molecules and proteins are discussed. Binding to streptavidin had a significant influence on both fluorescence and anisotropy decays of the cyanine dyes investigated. In particular, the fluorescence anisotropy was significantly altered, making it a promising detection parameter for bioanalytical applications in connection with the cyanine dyes used in the present study. In order to evaluate the time-resolved anisotropy, the introduction of a sophisticated kinetic model was required to describe the contributions from different fluorescing species properly. The rotational motion of streptavidin-bound dyes was analyzed using the associated anisotropy model, which allowed discrimination between contributions from different microenvironments. The anisotropy decay times increased by a factor of up to 20 due to protein binding.
A set of structures encompassing 1-(9-acridinyl)thiosemicarbazide and its 2-methyl derivative together with their various tautomeric structures; the 5-membered ring 1,3-thiazolidin-4-one products resulting from the reaction of 1- (9-acridinyl)thiosemicarbazide and its 2-methyl derivative with dimethyl acetylenedicarboxylate (DMAD) together with the alternative 6-membered ring isomeric reaction products as well as other potential isomeric structures; and the 6- membered ring 1,3-thiazin-4-one product resulting from the reaction of 2-methyl-1-(9-acridinyl)thiosemicarbazide with methyl propiolate (MP) together with the alternative 5-membered ring isomeric reaction product were all extensively studied by molecular modeling calculations using DFT at the B3LYP/6-31G(d,p) level of theory. The ring-chain tautomerism of the thiosemicarbazides, the regio- and stereoselectivity of the reactions, the adopted conformations and E/Z configurations of the products, the prototropic tautomerism of all the compounds, and the reasons for the predominance of the s-cis conformation of the Z configuration of the 1,3-thiazolidin-4-one product in particular were all extensively analyzed. Comparison of the modeled structures were also made to the 1,3-thiazolidin-4-one and 1,3-thiazin-4-one structures of the methyl derivative as well as 1-(9-acridinyl)thiosemicarbazide available from X-ray crystallographic analysis. Tactics utilizing spectroscopic methods {IR frequencies (;) and NMR chemical shifts (;), scalar coupling constants (J), and NOEs (;)} in conjunction with molecular modeling calculations of the spectral parameters {frequency calculations (;) and NMR ; using the GIAO method and J by calculation of the Fermi contact term} were evaluated in terms of proving 5- or 6-membered ring formation.
Determination of micelle diffusion coefficients with fluorescence correlation spectroscopy (FCS)
(2009)
The self-metathesis of methyl 10-undecenoate as well as its cross-metathesis with methyl acrylate was investigated in detail by a systematic variation of the reaction conditions. Unsaturated ;,;-diesters with a chain length of 20 and 12 carbon atoms were thus obtained, respectively. Four different metathesis catalysts were investigated under solvent-free conditions at catalyst loadings ranging from 0.05 mol% to 1 mol% and at temperatures ranging from 30 °C to 90 °C. In the case of the self-metathesis reactions quantitative conversions were obtained with all catalysts, but the second generation metathesis catalysts revealed high amounts of olefin isomerization side reactions at higher temperatures. Using a small quantity of the hydrogen acceptor 1,4-benzoquinone, the isomerization process was almost completely suppressed. Thus, the second generation catalysts allowed for high conversions at very low catalyst loadings. For the cross-metathesis reaction, an interesting temperature and catalyst loading dependent selectivity was observed with the second generation catalysts. Moreover, due to these optimizations, we were able to run these cross-metathesis reactions with a 1:1 ratio of the reactants and low catalysts loadings. This is an improvement over described literature procedures. Thus, we report on the detailed investigation of the described self- and cross- metathesis reactions leading to practical and optimized reaction conditions for the synthesis of unsaturated ;,;-diesters monomers from renewable raw materials in an efficient catalytic manner.
This paper is focused on the influence of added polyampholyte, namely poly(N,N;-diallyl-N,N;- dimethyl-alt-maleamic carboxylate) on the inverse micellar phase range of the pseudo-ternary system consisting of toluene-pentanol (1:1)/SDS/water in dependence on the pH value and the temperature. Investigations on phase behavior have revealed that a greater extension in direction to the water-rich corner can be found at pH 4 compared to pH 9. In order to understand changes in the microstructure, polymer-surfactant interactions in dependence on pH have been examined by means of diffusion-ordered spectroscopy, differential scanning calorimetry, as well as conductivity measurements. The results have proven that the present microemulsion consists of water-in-oil droplets, with the polyampholyte located more in the inner core of the water droplets at pH 9 rather than at the interphase of the surfactant film at pH 4.
Due to depleting fossil resources, the ever increasing emission of greenhouse gases and toxic waste, as well as the inefficient utilization of our available resources, we have to implement the principles of green chemistry whenever and wherever possible. Plant oils are already the most important renewable resource for the chemical industry. Due to their inherent double-bond functionality, they offer the possibility of being transformed via several very efficient catalytic processes. Especially, new developments in olefin metathesis allow the chemist to directly polymerize or introduce a variety of functional groups to these renewable resources in an efficient manner. Therefore, olefin metathesis with plant-oil-derived fatty acids and their derivatives can contribute to a sustainable development of our future, since this approach has great potential for the substitution of currently used petrochemicals and a variety of value-added chemical intermediates, especially for the polymer industry, can be derived from these resources in a straightforward fashion. This contribution will address and discuss the most recent developments in this field of research.