Refine
Year of publication
- 2019 (54) (remove)
Document Type
- Doctoral Thesis (54) (remove)
Keywords
- Biodiversität (3)
- movement ecology (3)
- Bewegungsökologie (2)
- Klimawandel (2)
- Räuber-Beute (2)
- adaptation (2)
- biodiversity (2)
- climate change (2)
- ecology (2)
- predator-prey (2)
Institute
- Institut für Biochemie und Biologie (54) (remove)
Thermoresponsive Zellkultursubstrate für zeitlich-räumlich gesteuertes Auswachsen neuronaler Zellen
(2019)
Ein wichtiges Ziel der Neurowissenschaften ist das Verständnis der komplexen und zugleich faszinierenden, hochgeordneten Vernetzung der Neurone im Gehirn, welche neuronalen Prozessen, wie zum Beispiel dem Wahrnehmen oder Lernen wie auch Neuropathologien zu Grunde liegt. Für verbesserte neuronale Zellkulturmodelle zur detaillierten Untersuchung dieser Prozesse ist daher die Rekonstruktion von geordneten neuronalen Verbindungen dringend erforderlich. Mit Oberflächenstrukturen aus zellattraktiven und zellabweisenden Beschichtungen können neuronale Zellen und ihre Neuriten in vitro strukturiert werden. Zur Kontrolle der neuronalen Verbindungsrichtung muss das Auswachsen der Axone zu benachbarten Zellen dynamisch gesteuert werden, zum Beispiel über eine veränderliche Zugänglichkeit der Oberfläche.
In dieser Arbeit wurde untersucht, ob mit thermoresponsiven Polymeren (TRP) beschichtete Zellkultursubstrate für eine dynamische Kontrolle des Auswachsens neuronaler Zellen geeignet sind. TRP können über die Temperatur von einem zellabweisenden in einen zellattraktiven Zustand geschaltet werden, womit die Zugänglichkeit der Oberfläche für Zellen dynamisch gesteuert werden kann. Die TRP-Beschichtung wurde mikrostrukturiert, um einzelne oder wenige neuronale Zellen zunächst auf der Oberfläche anzuordnen und das Auswachsen der Zellen und Neuriten über definierte TRP-Bereiche in Abhängigkeit der Temperatur zeitlich und räumlich zu kontrollieren. Das Protokoll wurde mit der neuronalen Zelllinie SH-SY5Y etabliert und auf humane induzierte Neurone übertragen. Die Anordnung der Zellen konnte bei Kultivierung im zellabweisenden Zustand des TRPs für bis zu 7 Tage aufrecht erhalten werden. Durch Schalten des TRPs in den zellattraktiven Zustand konnte das Auswachsen der Neuriten und Zellen zeitlich und räumlich induziert werden. Immunozytochemische Färbungen und Patch-Clamp-Ableitungen der Neurone demonstrierten die einfache Anwendbarkeit und Zellkompatibilität der TRP-Substrate.
Eine präzisere räumliche Kontrolle des Auswachsens der Zellen sollte durch lokales Schalten der TRP-Beschichtung erreicht werden. Dafür wurden Mikroheizchips mit Mikroelektroden zur lokalen Jouleschen Erwärmung der Substratoberfläche entwickelt. Zur Evaluierung der generierten Temperaturprofile wurde eine Temperaturmessmethode entwickelt und die erhobenen Messwerte mit numerisch simulierten Werten abgeglichen. Die Temperaturmessmethode basiert auf einfach zu applizierenden Sol-Gel-Schichten, die den temperatursensitiven Fluoreszenzfarbstoff Rhodamin B enthalten. Sie ermöglicht oberflächennahe Temperaturmessungen in trockener und wässriger Umgebung mit hoher Orts- und Temperaturauflösung. Numerische Simulationen der Temperaturprofile korrelierten gut mit den experimentellen Daten. Auf dieser Basis konnten Geometrie und Material der Mikroelektroden hinsichtlich einer lokal stark begrenzten Temperierung optimiert werden. Ferner wurden für die Kultvierung der Zellen auf den Mikroheizchips eine Zellkulturkammer und Kontaktboard für die elektrische Kontaktierung der Mikroelektroden geschaffen.
Die vorgestellten Ergebnisse demonstrieren erstmalig das enorme Potential thermoresponsiver Zellkultursubstrate für die zeitlich und räumlich gesteuerte Formation geordneter neuronaler Verbindungen in vitro. Zukünftig könnte dies detaillierte Studien zur neuronalen Informationsverarbeitung oder zu Neuropathologien an relevanten, humanen Zellmodellen ermöglichen.
Light-switchable proteins are being used increasingly to understand and manipulate complex molecular systems. The success of this approach has fueled the development of tailored photo-switchable proteins, to enable targeted molecular events to be studied using light. The development of novel photo-switchable tools has to date largely relied on rational design. Complementing this approach with directed evolution would be expected to facilitate these efforts. Directed evolution, however, has been relatively infrequently used to develop photo-switchable proteins due to the challenge presented by high-throughput evaluation of switchable protein activity. This thesis describes the development of two genetic circuits that can be used to evaluate libraries of switchable proteins, enabling optimization of both the on- and off-states. A screening system is described, which permits detection of DNA-binding activity based on conditional expression of a fluorescent protein. In addition, a tunable selection system is presented, which allows for the targeted selection of protein-protein interactions of a desired affinity range. This thesis additionally describes the development and characterization of a synthetic protein that was designed to investigate chromophore reconstitution in photoactive yellow protein (PYP), a promising scaffold for engineering photo-controlled protein tools.
The African weakly electric fish genus Campylomormyrus is a well-investigated fish group of the species-rich family Mormyridae. They are able to generate species-specific electric organ discharges (EODs) which vary in their waveform characteristics including polarity, phase umber and duration. In mormyrid species EODs are used for communication, species discrimination and mate recognition, and it is thought hat they serve as pre-zygotic isolation mechanism driving sympatric speciation by promoting assortative mating. The EOD diversification, its volutionary effects and the link to species divergence have been examined histologically, behaviorally, and genetically. Molecular analyses are a major tool to identify species and their phenotypic traits by studying the underlying genes. The genetic variability between species further provides information from which evolutionary processes, such as speciation, can be deduced. Hence, the ultimate aim of this study is the investigation of genetic variability within the African weakly electric fish genus Campylomormyrus to better understand their sympatric speciation and comprehend their evolutionary drivers. In order to extend the current knowledge and gain more insights into its species history, karyological and genomic approaches are being pursued considering species differences. Previous studies have shown that species with different EOD duration have specific gene expression patterns and single nucleotide polymorphisms (SNPs). As EODs play a crucial role during the evolution of Campylomormyrus species, the identification of its underlying genes may suggest how the EOD diversity evolved and whether this trait is based on a complex network of genetic processes or is regulated by only a few genes. The results obtained in this study suggest that genes with non-synonymous SNPs, which are exclusive to C. tshokwe with an elongated EOD, have frequent functions ssociated with tissue morphogenesis and transcriptional regulation. Therefore, it is proposed that these processes likely co-determine EOD characteristics of Campylomormyrus species. Furthermore, genome-wide analyses confirm the genetic difference among most Campylomormyrus species. In contrast, the same analyses reveal genetic similarity among individuals of the alces-complex showing different EOD waveforms. It is therefore hypothesized that the low genetic variability and high EOD diversity represents incipient sympatric speciation. The karyological description of a Campylomormyrus species provides crucial information about chromosome number and shapes. Its diploid chromosome number of 2n=48 supports the conservation of this trait within Mormyridae. Differences have been detected in the number of bi-armed chromosomes which is unusually high compared to other mormyrid species. This high amount can be due to chromosome rearrangements which could cause genetic incompatibility and reproductive isolation. Hence an alternative hypothesis regarding processes which cause sympatric speciation is that chromosome differences are involved in the speciation process of Campylomormyrus by acting as postzygotic isolation mechanism. In summary, the karyological and genomic investigations conducted in this study contributed to the increase of knowledge about Campylomormyrus species, to the solution of some existing ambiguities like phylogenetic relationships and to the raising of new hypothesis explaining the sympatric speciation of those African weakly electric fish. This study provides a basis for future genomic research to obtain a complete picture for causes and results of evolutionary processes in Campylomormyrus.
Predation drives coexistence, evolution and population dynamics of species in food webs, and has strong impacts on related ecosystem functions (e.g. primary production). The effect of predation on these processes largely depends on the trade-offs between functional traits in the predator and prey community. Trade-offs between defence against predation and competitive ability, for example, allow for prey speciation and predator-mediated coexistence of prey species with different strategies (defended or competitive), which may stabilize the overall food web dynamics. While the importance of such trade-offs for coexistence is widely known, we lack an understanding and the empirical evidence of how the variety of differently shaped trade-offs at multiple trophic levels affect biodiversity, trait adaptation and biomass dynamics in food webs. Such mechanistic understanding is crucial for predictions and management decisions that aim to maintain biodiversity and the capability of communities to adapt to environmental change ensuring their persistence.
In this dissertation, after a general introduction to predator-prey interactions and tradeoffs, I first focus on trade-offs in the prey between qualitatively different types of defence (e.g. camouflage or escape behaviour) and their costs. I show that these different types lead to different patterns of predator-mediated coexistence and population dynamics, by using a simple predator-prey model. In a second step, I elaborate quantitative aspects of trade-offs and demonstrates that the shape of the trade-off curve in combination with trait-fitness relationships strongly affects competition among different prey types: Either specialized species with extreme trait combinations (undefended or completely defended) coexist, or a species with an intermediate defence level dominates. The developed theory on trade-off shapes and coexistence is kept general, allowing for applications apart from defence-competitiveness trade-offs. Thirdly, I tested the theory on trade-off shapes on a long-term field data set of phytoplankton from Lake Constance. The measured concave trade-off between defence and growth governs seasonal trait changes of phytoplankton in response to an altering grazing pressure by zooplankton, and affects the maintenance of trait variation in the community. In a fourth step, I analyse the interplay of different tradeoffs at multiple trophic levels with plankton data of Lake Constance and a corresponding tritrophic food web model. The results show that the trait and biomass dynamics of the different three trophic levels are interrelated in a trophic biomass-trait cascade, leading to unintuitive patterns of trait changes that are reversed in comparison to predictions from bitrophic systems. Finally, in the general discussion, I extract main ideas on trade-offs in multitrophic systems, develop a graphical theory on trade-off-based coexistence, discuss the interplay of intra- and interspecific trade-offs, and end with a management-oriented view on the results of the dissertation, describing how food webs may respond to future global changes, given their trade-offs.
Multifunctional reprogrammable actuators based on polymer networks with crystallizable segments
(2019)
Soft polymeric materials, which can change their shape reversibly in response to external stimuli, can serve as actuating components in robotic systems. Besides electroactive polymers (EAP), hydrogels and liquid crystalline elastomers (LCE), crosslinked crystallizable shape-memory polymers networks have been introduced recently as reprogrammable thermo-reversible actuators. The integration of additional functions in such materials will lead to multifunctional polymeric actuators, which meet the complex requirements of modern robotic applications.
The primary aim of this thesis was to achieve multifunctional reprogrammable thermo-reversible actuators based on thermoplastic polymers. Here, three different actuators providing additional functionalities such as surface modification capability (i), self-healing capability (ii) or a tailorable non-response function enabling noncontinuous multi-step motions (iii) were realized. At first, it was hypothesized that surface modifiable polymeric actuators (i) can be achieved by crosslinking of crystallizable thermoplastic terpolymers having reactive moieties, where subsequent thermomechanical programming enables reversible actuations while the sustained reactive groups allow post surface modification. For the second actuator type (ii) it was hypothesized that self-healing during reprogramming of polymeric actuators prepared by crosslinking of crystallizable linear homopolymers, can be achieved by adjusting the amount of freely interpenetrating extractable polymer moieties. Finally, it was hypothesized that thermo-reversible actuators providing a non-response function (iii) and thus enable multistep motions upon continuous normal stimulation, can be achieved by a crosslinked blend of two thermoplastic polymers with co-continuous morphology having a well-separated melting and crystallization transitions. In addition, these actuators can be physically reprogrammed by heating above all melting transitions to provide a different actuating shape.
In this study, surface functionalizable actuators were realized from crosslinked poly[(ethylene)-co-(ethyl acrylate)-co-(maleic anhydride)] (cPEEAMA) based networks. Here crystallizable polyethylene (PE) segments should serve as actuation segments, ethyl acrylate (EA) provides elasticity to the system required for deformation, while reactive maleic anhydride (MA) will be used as chemically modifiable entities for post surface modification. Networks with varied crosslink density were prepared and its effect on thermomechanical properties as well as actuation performance was analyzed. Cyclic thermomechanical experiments were employed to investigate the actuation capability, which revealed a reversible actuation (ε׳rev) between 5 and 15%. Fourier-transform infrared spectroscopy (FTIR) measurements confirmed that MA groups were sustained at the sample surface after processing and programming, which could be modified by reaction with ethylene diamine. Such amine functionalization allows the attachment of bioactive molecules to the actuator surface, which might provide a route to actuating substrates for biotechnology.
Self-healable actuating materials were realized by poly(ε-caprolactone) (PCL) polymer networks with extractable linear PCL fractions of 5 to 60 wt%. A detailed evaluation of the actuation capabilities by cyclic experiments revealed the highest reversible change in strain of Δε = 24% for the cPCL network with 30 wt% of linear polymer. The thermal treatment of damaged samples resulted in the healing of the network when heated to 80 °C. Here a linear polymer fraction ≥ 30 wt% was necessary to achieve a self-healing efficiency of ≥ 50%. The application of such high temperatures erases the programmed actuator shape and at the same time allows to reprogram a new actuating shape. Such sustainable actuators with self-healing function are of great interest for future robotic devices.
Afore mentioned actuators operate continuously between two shapes and their movements can only be interrupted when the temperature is stopped. To overcome this limitation, noncontinuously responding actuators enabling multi-step actuation were realized from crosslinked blend networks prepared from PCL and poly[(ethylene)-co-(vinyl acetate)] (PEVA). These polymers (PCL and PEVA) were selected due to their immiscible character, where crystallizable PE and PCL segments provide two different actuation units, while vinyl acetate (VA) segment enabled sufficient elasticity of the system. A gap of 20 K in the melting and crystallization temperature of PE and PCL was achieved by selecting PEVA with 5 wt% VA content (cPCL-PEVA5) providing a co-continuous phase morphology. Cyclic thermomechanical investigations were employed to investigate noncontinuous actuation, which revealed a high Δε = 25% with a similar contribution from PCL and PE actuation units with a non-response region in the temperature range from 50 to 71 °C in heating step and 30 to 60 °C in cooling step. The actuation related to PCL part changed from 13 to 2% by altering the heating and cooling rates from 3 to 10 K·min-1. Free-standing reversible noncontinuous actuation was realized by rotating demonstrator which exhibits reversible angle change in a custom-made setup. For this purpose, cPCL-PEVA5 stripe was programmed by twisting and reversible rotational actuation was realized from 0 to 180° while pausing in the 90° position during non-response. These blends can be physically programmed to perform reversible noncontinuous actuations, while the programmed geometry can be erased by heating it to temperature above all melting transitions. By physically reprogramming of the material various different actuation modes can be obtained. Such a noncontinuous actuator would be relevant for designing interruptive actuating soft robots at continuous trigger signals.
Force plays a fundamental role in the regulation of biological processes. Cells can sense the mechanical properties of the extracellular matrix (ECM) by applying forces and transmitting mechanical signals. They further use mechanical information for regulating a wide range of cellular functions, including adhesion, migration, proliferation, as well as differentiation and apoptosis. Even though it is well understood that mechanical signals play a crucial role in directing cell fate, surprisingly little is known about the range of forces that define cell-ECM interactions at the molecular level.
Recently, synthetic molecular force sensor (MFS) designs have been established for measuring the molecular forces acting at the cell-ECM interface. MFSs detect the traction forces generated by cells and convert this mechanical input into an optical readout. They are composed of calibrated mechanoresponsive building blocks and are usually equipped with a fluorescence reporter system. Up to date, many different MFS designs have been introduced and successfully used for measuring forces involved in the adhesion of mammalian cells. These MFSs utilize different molecular building blocks, such as double-stranded deoxyribonucleic acid (dsDNA) molecules, DNA hairpins and synthetic polymers like polyethylene glycol (PEG). These currently available MFS designs lack ECM mimicking properties.
In this work, I introduce a new MFS building block for cell biology applications, derived from the natural ECM. It combines mechanical tunability with the ability to mimic the native cellular microenvironment. Inspired by structural ECM proteins with load bearing function, this new MFS design utilizes coiled coil (CC)-forming peptides. CCs are involved in structural and mechanical tasks in the cellular microenvironment and many of the key protein components of the cytoskeleton and the ECM contain CC structures. The well-known folding motif of CC structures, an easy synthesis via solid phase methods and the many roles CCs play in biological processes have inspired studies to use CCs as tunable model systems for protein design and assembly. All these properties make CCs ideal candidates as building blocks for MFSs. In this work, a series of heterodimeric CCs were designed, characterized and further used as molecular building blocks for establishing a novel, next-generation MFS prototype.
A mechanistic molecular understanding of their structural response to mechanical load is essential for revealing the sequence-structure-mechanics relationships of CCs. Here, synthetic heterodimeric CCs of different length were loaded in shear geometry and their mechanical response was investigated using a combination of atomic force microscope (AFM)-based single-molecule force spectroscopy (SMFS) and steered molecular dynamics (SMD) simulations. SMFS showed that the rupture forces of short heterodimeric CCs (3-5 heptads) lie in the range of 20-50 pN, depending on CC length, pulling geometry and the applied loading rate (dF/dt). Upon shearing, an initial rise in the force, followed by a force plateau and ultimately strand separation was observed in SMD simulations. A detailed structural analysis revealed that CC response to shear load depends on the loading rate and involves helix uncoiling, uncoiling-assisted sliding in the direction of the applied force and uncoiling-assisted dissociation perpendicular to the force axis.
The application potential of these mechanically characterized CCs as building blocks for MFSs has been tested in 2D cell culture applications with the goal of determining the threshold force for cell adhesion. Fully calibrated, 4- to 5-heptad long, CC motifs (CC-A4B4 and CC-A5B5) were used for functionalizing glass surfaces with MFSs. 3T3 fibroblasts and endothelial cells carrying mutations in a signaling pathway linked to cell adhesion and mechanotransduction processes were used as model systems for time-dependent adhesion experiments. A5B5-MFS efficiently supported cell attachment to the functionalized surfaces for both cell types, while A4B4-MFS failed to maintain attachment of 3T3 fibroblasts after the first 2 hours of initial cell adhesion. This difference in cell adhesion behavior demonstrates that the magnitude of cell-ECM forces varies depending on the cell type and further supports the application potential of CCs as mechanoresponsive and tunable molecular building blocks for the development of next-generation protein-based MFSs.This novel CC-based MFS design is expected to provide a powerful new tool for observing cellular mechanosensing processes at the molecular level and to deliver new insights into the mechanisms and forces involved. This MFS design, utilizing mechanically tunable CC building blocks, will not only allow for measuring the molecular forces acting at the cell-ECM interface, but also yield a new platform for the development of mechanically controlled materials for a large number of biological and medical applications.
Analysis of supramolecular assemblies of NE81, the first lamin protein in a non-metazoan organism
(2019)
Nuclear lamins are nucleus-specific intermediate filaments forming a network located at the inner nuclear membrane of the nuclear envelope. They form the nuclear lamina together with proteins of the inner nuclear membrane regulating nuclear shape and gene expression, among others. The amoebozoan Dictyostelium NE81 protein is a suitable candidate for an evolutionary conserved lamin protein in this non-metazoan organism. It shares the domain organization of metazoan lamins and is fulfilling major lamin functions in Dictyostelium. Moreover, field-emission scanning electron microscopy (feSEM) images of NE81 expressed on Xenopus oocytes nuclei revealed filamentous structures with an overall appearance highly reminiscent to that of metazoan Xenopus lamin B2. For the classification as a lamin-like or a bona fide lamin protein, a better understanding of the supramolecular NE81 structure was necessary. Yet, NE81 carrying a large N-terminal GFP-tag turned out as unsuitable source for protein isolation and characterization; GFP-NE81 expressed in Dictyostelium NE81 knock-out cells exhibited an abnormal distribution, which is an indicator for an inaccurate assembly of GFP-tagged NE81. Hence, a shorter 8×HisMyc construct was the tag of choice to investi-gate formation and structure of NE81 assemblies. One strategy was the structural analysis of NE81 in situ at the outer nuclear membrane in Dictyostelium cells; NE81 without a func-tional nuclear localization signal (NLS) forms assemblies at the outer face of the nucleus. Ultrastructural feSEM pictures of NE81ΔNLS nuclei showed a few filaments of the expected size but no repetitive filamentous structures. The former strategy should also be established for metazoan lamins in order to facilitate their structural analysis. However, heterologously expressed Xenopus and C. elegans lamins showed no uniform localization at the outer nucle-ar envelope of Dictyostelium and hence, no further ultrastructural analysis was undertaken. For in vitro assembly experiments a Dictyostelium mutant was generated, expressing NE81 without the NLS and the membrane-anchoring isoprenylation site (HisMyc-NE81ΔNLSΔCLIM). The cytosolic NE81 clusters were soluble at high ionic strength and were purified from Dictyostelium extracts using Ni-NTA Agarose. Widefield immunofluorescence microscopy, super-resolution light microscopy and electron microscopy images of purified NE81 showed its capability to form filamentous structures at low ionic strength, as described previously for metazoan lamins. Introduction of a phosphomimetic point mutation (S122E) into the CDK1-consensus sequence of NE81 led to disassembled NE81 protein in vivo, which could be reversibly stimulated to form supramolecular assemblies by blue light exposure.
The results of this work reveal that NE81 has to be considered a bona fide lamin, since it is able to form filamentous assemblies. Furthermore, they highlight Dictyostelium as a non-mammalian model organism with a well-characterized nuclear envelope containing all rele-vant protein components known in animal cells.
Phytoplankton growth depends not only on the mean intensity but also on the dynamics of the light supply. The nonlinear light-dependency of growth is characterized by a small number of basic parameters: the compensation light intensity PARcompμ, where production and losses are balanced, the growth efficiency at sub-saturating light αµ, and the maximum growth rate at saturating light µmax. In surface mixed layers, phytoplankton may rapidly move between high light intensities and almost darkness. Because of the different frequency distribution of light and/or acclimation processes, the light-dependency of growth may differ between constant and fluctuating light. Very few studies measured growth under fluctuating light at a sufficient number of mean light intensities to estimate the parameters of the growth-irradiance relationship. Hence, the influence of light dynamics on µmax, αµ and PARcompμ are still largely unknown. By extension, accurate modelling predictions of phytoplankton development under fluctuating light exposure remain difficult to make. This PhD thesis does not intend to directly extrapolate few experimental results to aquatic systems – but rather improving the mechanistic understanding of the variation of the light-dependency of growth under light fluctuations and effects on phytoplankton development.
In Lake TaiHu and at the Three Gorges Reservoir (China), we incubated phytoplankton communities in bottles placed either at fixed depths or moved vertically through the water column to mimic vertical mixing. Phytoplankton at fixed depths received only the diurnal changes in light (defined as constant light regime), while phytoplankton received rapidly fluctuating light by superimposing the vertical light gradient on the natural sinusoidal diurnal sunlight. The vertically moved samples followed a circular movement with 20 min per revolution, replicating to some extent the full overturn of typical Langmuir cells. Growth, photosynthesis, oxygen production and respiration of communities (at Lake TaiHu) were
measured. To complete these investigations, a physiological experiment was performed in the laboratory on a toxic strain of Microcystis aeruginosa (FACBH 1322) incubated under 20 min period fluctuating light. Here, we measured electron transport rates and net oxygen production at a much higher time resolution (single minute timescale).
The present PhD thesis provides evidence for substantial effects of fluctuating light on the eco-physiology of phytoplankton. Both experiments performed under semi-natural conditions in Lake TaiHu and at the Three Gorges Reservoir gave similar results. The significant decline in community growth efficiencies αµ under fluctuating light was caused for a great share by different frequency distribution of light intensities that shortened the effective daylength for production. The remaining gap in community αµ was attributed to species-specific photoacclimation mechanisms and to light-dependent respiratory losses. In contrast, community maximal growth rates µmax were similar between incubations at constant and fluctuating light. At daily growth saturating light supply, differences in losses for biosynthesis between the two light regimes were observed. Phytoplankton experiencing constant light suffered photo-inhibition - leading to photosynthesis foregone and additional respiratory costs for photosystems repair. On the contrary, intermittent exposure to low and high light intensities prevented photo-inhibition of mixed algae but forced them to develop alternative light strategy. They better harvested and exploited surface irradiance by enhancing their photosynthesis. In the laboratory, we showed that Microcystis aeruginosa increased its oxygen consumption by dark respiration in the light few minutes only after exposure to increasing light intensities. More, we proved that within a simulated Langmuir cell, the net production at saturating light and the compensation light intensity for production at limiting light are positively related. These results are best explained by an accumulation of photosynthetic products at increasing irradiance and mobilization of these fresh resources by rapid enhancement of dark respiration for maintenance and biosynthesis at decreasing irradiance. At the daily timescale, we showed that the enhancement of photosynthesis at high irradiance for biosynthesis of species increased their maintenance respiratory costs at limiting light. Species-specific growth at saturating light µmax and compensation light intensity for growth PARcompμ of species incubated in Lake TaiHu were positively related. Because of this species-specific physiological tradeoff, species displayed different light affinities to limiting and saturating light - thereby exhibiting a gleaner-opportunist tradeoff. In Lake TaiHu, we showed that inter-specific differences in light acquisition traits (µmax and PARcompμ) allowed coexis¬tence of species on a gradient of constant
light while avoiding competitive exclusion. More interestingly we demonstrated for the first time that vertical mixing (inducing fluctuating light supply for phytoplankton) may alter or even reverse the light utilization strategies of species within couple of days. The intra-specific variation in traits under fluctuating light increased the niche space for acclimated species, precluding competitive exclusion.
Overall, this PhD thesis contributes to a better understanding of phytoplankton eco-physiology under fluctuating light supply. This work could enhance the quality of predictions of phytoplankton development under certain weather conditions or climate change scenarios.
Increasing concerns regarding the environmental impact of our chemical production have shifted attention towards possibilities for sustainable biotechnology. One-carbon (C1) compounds, including methane, methanol, formate and CO, are promising feedstocks for future bioindustry. CO2 is another interesting feedstock, as it can also be transformed using renewable energy to other C1 feedstocks for use. While formaldehyde is not suitable as a feedstock due to its high toxicity, it is a central intermediate in the process of C1 assimilation. This thesis explores formaldehyde metabolism and aims to engineer formaldehyde assimilation in the model organism Escherichia coli for the future C1-based bioindustry.
The first chapter of the thesis aims to establish growth of E. coli on formaldehyde via the most efficient naturally occurring route, the ribulose monophosphate pathway. Linear variants of the pathway were constructed in multiple-gene knockouts strains, coupling E. coli growth to the activities of the key enzymes of the pathway. Formaldehyde-dependent growth was achieved in rationally designed strains. In the final strain, the synthetic pathway provides the cell with almost all biomass and energy requirements.
In the second chapter, taking advantage of the unique feature of its reactivity, formaldehyde assimilation via condensation with glycine and pyruvate by two promiscuous aldolases was explored. Facilitated by these two reactions, the newly designed homoserine cycle is expected to support higher yields of a wide array of products than its counterparts. By dividing the pathway into segments and coupling them to the growth of dedicated strains, all pathway reactions were demonstrated to be sufficiently active. The work paves a way for future implementation of a highly efficient route for C1 feedstocks into commodity chemicals.
In the third chapter, the in vivo rate of the spontaneous formaldehyde tetrahydrofolate condensation to methylene-tetrahydrofolate was assessed in order to evaluate its applicability as a biotechnological process. Tested within an E. coli strain deleted in essential genes for native methylene-tetrahydrofolate biosynthesis, the reaction was shown to support the production of this essential intermediate. However, only low growth rates were observed and only at high formaldehyde concentrations. Computational analysis dependent on in vivo evidence from this strain deduced the slow rate of this spontaneous reaction, thus ruling out its substantial contribution to growth on C1 feedstocks.
The reactivity of formaldehyde makes it highly toxic. In the last chapter, the formation of thioproline, the condensation product of cysteine and formaldehyde, was confirmed to contribute this toxicity effect. Xaa-Pro aminopeptidase (PepP), which genetically links with folate metabolism, was shown to hydrolyze thioproline-containing peptides. Deleting pepP increased strain sensitivity to formaldehyde, pointing towards the toxicity of thioproline-containing peptides and the importance of their removal. The characterization in this study could be useful in handling this toxic intermediate.
Overall, this thesis identified challenges related to formaldehyde metabolism and provided novel solutions towards a future bioindustry based on sustainable C1 feedstocks in which formaldehyde serves as a key intermediate.
Since half a century, cytometry has been a major scientific discipline in the field of cytomics - the study of system’s biology at single cell level. It enables the investigation of physiological processes, functional characteristics and rare events with proteins by analysing multiple parameters on an individual cell basis. In the last decade, mass cytometry has been established which increased the parallel measurement to up to 50 proteins. This has shifted the analysis strategy from conventional consecutive manual gates towards multi-dimensional data processing. Novel algorithms have been developed to tackle these high-dimensional protein combinations in the data. They are mainly based on clustering or non-linear dimension reduction techniques, or both, often combined with an upstream downsampling procedure. However, these tools have obstacles either in comprehensible interpretability, reproducibility, computational complexity or in comparability between samples and groups.
To address this bottleneck, a reproducible, semi-automated cytometric data mining workflow PRI (pattern recognition of immune cells) is proposed which combines three main steps: i) data preparation and storage; ii) bin-based combinatorial variable engineering of three protein markers, the so called triploTs, and subsequent sectioning of these triploTs in four parts; and iii) deployment of a data-driven supervised learning algorithm, the cross-validated elastic-net regularized logistic regression, with these triploT sections as input variables. As a result, the selected variables from the models are ranked by their prevalence, which potentially have discriminative value. The purpose is to significantly facilitate the identification of meaningful subpopulations, which are most distinguish between two groups. The proposed workflow PRI is exemplified by a recently published public mass cytometry data set. The authors found a T cell subpopulation which is discriminative between effective and ineffective treatment of breast carcinomas in mice. With PRI, that subpopulation was not only validated, but was further narrowed down as a particular Th1 cell population. Moreover, additional insights of combinatorial protein expressions are revealed in a traceable manner. An essential element in the workflow is the reproducible variable engineering. These variables serve as basis for a clearly interpretable visualization, for a structured variable exploration and as input layers in neural network constructs.
PRI facilitates the determination of marker levels in a semi-continuous manner. Jointly with the combinatorial display, it allows a straightforward observation of correlating patterns, and thus, the dominant expressed markers and cell hierarchies. Furthermore, it enables the identification and complex characterization of discriminating subpopulations due to its reproducible and pseudo-multi-parametric pattern presentation. This endorses its applicability as a tool for unbiased investigations on cell subsets within multi-dimensional cytometric data sets.
The unprecedented increase in atmospheric concentrations of carbon dioxide (CO2) and other greenhouse gases (GHG) by anthropogenic activities since the Industrial Revolution impacts on various earth system processes, commonly referred to as `climate change´ (CC). CC faces aquatic ecosystems with extreme abiotic perturbations that potentially alter the interrelations between functional autotrophic and heterotrophic plankton groups. These relations, however, modulate biogeochemical cycling and mediate the functioning of aquatic ecosystems as C sources or sinks to the atmosphere. The aim of this thesis was therefore to investigate how different aspects of CC influence community composition and functioning of pelagic heterotrophic bacteria. These organisms constitute a major component of biogeochemical cycling and largely determine the balance between autotrophic and heterotrophic processes.
Due to the vast amount of potential CC impacts, this thesis focuses on the following two aspects: (1) Increased exchange of CO2 across the atmosphere-water interface and reaction of CO2 with seawater leads to profound shifts in seawater carbonate chemistry, commonly termed as `ocean acidification´ (OA), with consequences for organism physiology and the availability of dissolved inorganic carbon (DIC) in seawater. (2) The increase in atmospheric GHG concentration impacts on the efficiency with which the Earth cools to space, affecting global surface temperature and climate. With ongoing CC, shifts in frequency and severity of episodic weather events, such as storms, are expected that in particular might affect lake ecosystems by disrupting thermal summer stratification. Both aspects of CC were studied at the ecosystem-level in large-volume mesocosm experiments by using the Kiel Off-shore Mesocosms for Future Ocean Simulations (KOSMOS) deployed at different coastal marine locations, and the LakeLab facility in Lake Stechlin.
We evaluated the impact of OA on heterotrophic bacterial metabolism in a brackish coastal ecosystem during low-nutrient summer months in the Baltic Sea. There are several in situ experiments that already assessed potential OA-induced changes in natural plankton communities at diverse spatial and seasonal conditions. However, most studies were performed at high phytoplankton biomass conditions, partly provoked by nutrient amendments. Our study highlights potential OA effects at low-nutrient conditions that are representative for most parts of the ocean and of particular interest in current OA research. The results suggest that during extended periods at low-nutrient concentrations, increasing pCO2 levels indirectly impact the growth balance of heterotrophic bacteria via trophic bacteria-phytoplankton interactions and shift the ecosystem to a more autotrophic system.
Further work investigated how OA affects heterotrophic bacterial dissolved organic matter (DOM) transformation in two mesocsom studies, performed at different nutrient conditions. We observed similar succession patterns for individual compound pools during a phytoplankton bloom and subsequent accumulation of these compounds irrespective of the pCO2 treatment. Our results indicate that OA-induced changes in the dynamics of bacterial DOM transformation and potential impacts on DOM quality are unlikely. In addition, there have been no indications that in dependence of nutrient conditions, different amounts of photosynthetic organic matter are channelled into the more recalcitrant DOM pool. This provides novel insights into the general dynamics of the marine DOM pool.
A fourth enclosure experiment in oligo-mesotrophic Lake Stechlin assessed the impact of a severe summer storm on lake bacterial communities during thermal stratification by artificially mixing. Mixing disrupted and lowered the thermocline, increasing the upper mixed layer and substantially changed water physical-chemical variables. Deep water entrainment and associated changes in water physical-chemical variables significantly affected relative bacterial abundances for about one week. Afterwards a pronounced cyanobacterial bloom developed in response to mixing which affected community assembly of heterotrophic bacteria. Colonization and mineralization of senescent phytoplankton cells by heterotrophic bacteria largely determined C-sequestration to the sediment. About six weeks after mixing, bacterial communities and measured activity parameters converged to control conditions. As such, summer storms have the potential to affect bacterial communities for a prolonged period during summer stratification. The results highlight effects on community assembly and heterotrophic bacterial metabolism that are associated to entrainment of deep water into the mixed water layer and assess consequences of an episodic disturbance event for the coupling between bacterial metabolism and autochthonous DOM production in large volume clear-water lakes.
Altogether, this doctoral thesis reveales substantial sensitivities of heterotrophic bacterial metabolism and community structure in response to OA and a simulated summer storm event, which should be considered when assessing the impact of climate change on marine and lake ecosystems.
Domestication syndrome has resulted in the large loss of genetic variation of crop plants. Because of such genetic loss, productivity of various beneficial secondary (specialized) metabolites that protect against abiotic/biotic stresses, has been narrowed in many domesticated crops. Many key regulators or structural genes of secondary metabolic pathways in the domesticated as well as wild tomatoes are still largely unknown. In recent studies, metabolic quantitative trait loci (mQTL) analysis using the population of introgression lines (ILs), each containing a single introgression from Solanum pennellii (wild tomato) in the genetic background of domesticated tomato (M82, Solanum lycopersicum), has been used for investigation of metabolic regulation and key genes involved in both primary and secondary metabolism. In this thesis, three research projects, i) understanding of metabolic linkage between branched chain amino acids (BCAAs) and secondary metabolism using antisense lines of BCAAs metabolic genes, ii) investigation of novel key genes involved in tomato secondary metabolism and fruit ripening, iii) mapping of drought stress responsive mQTLs in tomato, are presented and discussed. In the first part, metabolic linkage between leucine and secondary metabolism is investigated by analyzing antisense lines of four key genes (ketol-acid reductoisomerase, KARI; dihydroxy-acid dehydratase, DHAD; isopropylmalate dehydratase, IPMD and branched chain aminotransferases1, BCAT1) found previously in mQTL of leucine contents. Obtained results indicate that KARI might be a rate limiting enzyme for iC5 acyl-sucrose synthesis in young leaf but not in red ripe fruits. By integrating obtained results with previous reports, inductive metabolic linkage between BCAAs and other secondary metabolic pathways at DHAD transcriptional levels in fruit is proposed. In the second part, candidate genes that are involved in secondary metabolism and fruit ripening in tomato were found by the approach of expression quantitative trait loci (eQTL) analysis. To predict functions of those candidate genes, functional validation by virus induced gene silencing and transient overexpression were performed. Results obtained by analyzing T0 overexpression and artificial miRNA lines for some of those candidates confirm their predicted functions, for example involved in fruit ripening (WD40, Solyc04g005020) and iC5 acyl-sucrose synthesis (P450, Solyc03g111940). In the third part, mapping of drought stress responsive mQTLs was performed using 57 S. pennellii ILs population. Evaluation of genetic architecture of mQTL analysis resulted in identifying drought responsive ILs (11-2, 8-3-1, 10-1-1 and 3-1). Location of well characterized regulators in these ILs helped to filter potential new key genes involved in drought stress tolerance. Obtained results suggests us our approaches could be viable for narrowing down potential candidates involved in creating interspecific variation in secondary metabolite content and at the level of fruit ripening.
Floral scent is an important way for plants to communicate with insects, but scent emission has been lost or strongly reduced during the transition from pollinator-mediated outbreeding to selfing. The shift from outcrossing to selfing is not only accompanied by scent loss, but also by a reduction in other pollinator-attracting traits like petal size and can be observed multiple times among angiosperms. These changes are summarized by the term selfing syndrome and represent one of the most prominent examples of convergent evolution within the plant kingdom. In this work the genus Capsella was used as a model to study convergent evolution in two closely related selfers with separate transitions to self-fertilization.
Compared to their outbreeding ancestor C. grandiflora, the emission of benzaldehyde as main compound of floral scent is lacking or strongly reduced in the selfing species C. rubella and C. orientalis. In C. rubella the loss of benzaldehyde was caused by mutations to cinnamate:CoA ligase CNL1, but the biochemical basis and evolutionary history of this loss remained unknown, together with the genetic basis of scent loss in C. orientalis. Here, a combination of plant transformations, in vitro enzyme assays, population genetics and quantitative genetics has been used to address these questions. The results indicate that CNL1 has been inactivated twice independently by point mutations in C. rubella, leading to a loss of benzaldehyde emission. Both inactivated haplotypes can be found around the Mediterranean Sea, indicating that they arose before the species´ geographical spread. This study confirmed CNL1 as a hotspot for mutations to eliminate benzaldehyde emission, as it has been suggested by previous studies. In contrast to these findings, CNL1 in C. orientalis remains active. To test whether similar mechanisms underlie the convergent evolution of scent loss in C. orientalis a QTL mapping approach was used and the results suggest that this closely related species followed a different evolutionary route to reduce floral scent, possibly reflecting that the convergent evolution of floral scent is driven by ecological rather than genetic factors.
In parallel with studying the genetic basis of repeated scent loss a method for testing the adaptive value of individual selfing syndrome traits was established. The established method allows estimating outcrossing rates with a high throughput of samples and detects successfully insect-mediated outcrossing events, providing major advantages regarding time and effort compared to other approaches. It can be applied to correlate outcrossing rates with differences in individual traits by using quasi-isogenic lines as demonstrated here or with environmental or morphological parameters.
Convergent evolution can not only be observed for scent loss in Capsella but also for the morphological evolution of petal size. Previous studies detected several QTLs underlying the petal size reduction in C. orientalis and C. rubella, some of them shared among both species. One shared QTL is PAQTL1 which might map to NUBBIN, a growth factor. To better understand the morphological evolution and genetic basis of petal size reduction, this QTL was studied. Mapping this QTL to a gene might identify another example for a hotspot gene, in this case for the convergent evolution of petal size.
Light-induced pH cycle
(2019)
Background Many biochemical reactions depend on the pH of their environment and some are strongly accelerated in an acidic surrounding. A classical approach to control biochemical reactions non-invasivly is by changing the temperature. However, if the pH could be controlled by optical means using photo-active chemicals, this would mean to be able to accelerate suitable biochemical reactions. Optically switching the pH can be achieved by using photoacids. A photoacid is a molecule with a functional group that releases a proton upon irradiation with the suitable wavelength, acidifying the environmental aqueous surrounding. A major goal of this work was to establish a non-invasive method of optically controlling the pH in aqueous solutions, offering the opportunity to enhance the known chemical reactions portfolio. To demonstrate the photo-switchable pH cycling we chose an enzymatic assay using acid phosphatase, which is an enzyme with a strong pH dependent activity.
Results In this work we could demonstrate a light-induced, reversible control of the enzymatic activity of acid phosphatase non-invasivly. To successfully conduct those experiments a high power LED array was designed and built, suitable for a 96 well standard microtiter plate, not being commercially available. Heat management and a lateral ventilation system to avoid heat accumulation were established and a stable light intensity achieved. Different photoacids were characterised and their pH dependent absorption spectra recorded. By using the reversible photoacid G-acid as a proton donor, the pH can be changed reversibly using high power UV 365 nm LEDs. To demonstrate the pH cycling, acid phosphatase with hydrolytic activity under acidic conditions was chosen. An assay using the photoacid together with the enzyme was established, also providing that G-acid does not inhibit acid phosphatase. The feasibility of reversibly regulating the enzyme’s pH dependent activity by optical means was demonstrated, by controlling the enzymatic activity with light. It was demonstrated that the enzyme activity depends on the light exposure time only. When samples are not illuminated and left in the dark, no enzymatic activity was recorded. The process can be rapidly controlled by simply switching the light on and off and should be applicable to a wide range of enzymes and biochemical reactions.
Conclusions Reversible photoacids offer a light-dependent regulation of pH, making them extremely attractive for miniaturizable, non-invasive and time-resolved control of biochemical reactions. Many enzymes have a sharp pH dependent activity, thus the established setup in this thesis could be used for a versatile enzyme portfolio. Even though the demonstrated photo-switchable strategy could also be used for non-enzymatic assays, greatly facilitating the assay establishment. Photoacids have the potential for high throughput methods and automation. We demonstrated that it is possible to control photoacids using commonly available LEDs, making their use in highly integrated devices and instruments more attractive. The successfully designed 96 well high power UV LED array presents an opportunity for general combinatorial analysis in e.g. photochemistry, where a high light intensity is needed for the investigation of various reactions.