Refine
Has Fulltext
- yes (259) (remove)
Year of publication
Document Type
- Doctoral Thesis (259) (remove)
Language
- English (259) (remove)
Keywords
- Arabidopsis thaliana (12)
- Klimawandel (12)
- climate change (11)
- Arabidopsis (9)
- Evolution (8)
- Modellierung (8)
- Ökologie (8)
- Systembiologie (7)
- Transkriptionsfaktoren (7)
- Biodiversität (6)
Institute
- Institut für Biochemie und Biologie (259) (remove)
Research on novel and advanced biomaterials is an indispensable step towards their applications in desirable fields such as tissue engineering, regenerative medicine, cell culture, or biotechnology. The work presented here focuses on such a promising material: polyelectrolyte multilayer (PEM) composed of hyaluronic acid (HA) and poly(L-lysine) (PLL). This gel-like polymer surface coating is able to accumulate (bio-)molecules such as proteins or drugs and release them in a controlled manner. It serves as a mimic of the extracellular matrix (ECM) in composition and intrinsic properties. These qualities make the HA/PLL multilayers a promising candidate for multiple bio-applications such as those mentioned above. The work presented aims at the development of a straightforward approach for assessment of multi-fractional diffusion in multilayers (first part) and at control of local molecular transport into or from the multilayers by laser light trigger (second part).
The mechanism of the loading and release is governed by the interaction of bioactives with the multilayer constituents and by the diffusion phenomenon overall. The diffusion of a molecule in HA/PLL multilayers shows multiple fractions of different diffusion rate. Approaches, that are able to assess the mobility of molecules in such a complex system, are limited. This shortcoming motivated the design of a novel evaluation tool presented here.
The tool employs a simulation-based approach for evaluation of the data acquired by fluorescence recovery after photobleaching (FRAP) method. In this approach, possible fluorescence recovery scenarios are primarily simulated and afterwards compared with the data acquired while optimizing parameters of a model until a sufficient match is achieved. Fluorescent latex particles of different sizes and fluorescein in an aqueous medium are utilized as test samples validating the analysis results. The diffusion of protein cytochrome c in HA/PLL multilayers is evaluated as well.
This tool significantly broadens the possibilities of analysis of spatiotemporal FRAP data, which originate from multi-fractional diffusion, while striving to be widely applicable. This tool has the potential to elucidate the mechanisms of molecular transport and empower rational engineering of the drug release systems.
The second part of the work focuses on the fabrication of such a spatiotemporarily-controlled drug release system employing the HA/PLL multilayer. This release system comprises different layers of various functionalities that together form a sandwich structure. The bottom layer, which serves as a reservoir, is formed by HA/PLL PEM deposited on a planar glass substrate. On top of the PEM, a layer of so-called hybrids is deposited. The hybrids consist of thermoresponsive poly(N-isopropylacrylamide) (PNIPAM) -based hydrogel microparticles with surface-attached gold nanorods. The layer of hybrids is intended to serve as a gate that controls the local molecular transport through the PEM–solution-interface. The possibility of stimulating the molecular transport by near-infrared (NIR) laser irradiation is being explored.
From several tested approaches for the deposition of hybrids onto the PEM surface, the drying-based approach was identified as optimal. Experiments, that examine the functionality of the fabricated sandwich at elevated temperature, document the reversible volume phase transition of the PEM-attached hybrids while sustaining the sandwich stability. Further, the gold nanorods were shown to effectively absorb light radiation in the tissue- and cell-friendly NIR spectral region while transducing the energy of light into heat. The rapid and reversible shrinkage of the PEM-attached hybrids was thereby achieved. Finally, dextran was employed as a model transport molecule. It loads into the PEM reservoir in a few seconds with the partition constant of 2.4, while it spontaneously releases in a slower, sustained manner. The local laser irradiation of the sandwich, which contains the fluorescein isothiocyanate tagged dextran, leads to a gradual reduction of fluorescence intensity in the irradiated region.
The release system fabricated employs renowned photoresponsivity of the hybrids in an innovative setting. The results of the research are a step towards a spatially-controlled on-demand drug release system that paves the way to spatiotemporally controlled drug release.
The approaches developed in this work have the potential to elucidate the molecular dynamics in ECM and to foster engineering of multilayers with properties tuned to mimic the ECM. The work aims at spatiotemporal control over the diffusion of bioactives and their presentation to the cells.
Biofilms are complex living materials that form as bacteria get embedded in a matrix of self-produced protein and polysaccharide fibres. The formation of a network of extracellular biopolymer fibres contributes to the cohesion of the biofilm by promoting cell-cell attachment and by mediating biofilm-substrate interactions. This sessile mode of bacteria growth has been well studied by microbiologists to prevent the detrimental effects of biofilms in medical and industrial settings. Indeed, biofilms are associated with increased antibiotic resistance in bacterial infections, and they can also cause clogging of pipelines or promote bio-corrosion. However, biofilms also gained interest from biophysics due to their ability to form complex morphological patterns during growth. Recently, the emerging field of engineered living materials investigates biofilm mechanical properties at multiple length scales and leverages the tools of synthetic biology to tune the functions of their constitutive biopolymers.
This doctoral thesis aims at clarifying how the morphogenesis of Escherichia coli (E. coli) biofilms is influenced by their growth dynamics and mechanical properties. To address this question, I used methods from cell mechanics and materials science. I first studied how biological activity in biofilms gives rise to non-uniform growth patterns. In a second study, I investigated how E. coli biofilm morphogenesis and its mechanical properties adapt to an environmental stimulus, namely the water content of their substrate. Finally, I estimated how the mechanical properties of E. coli biofilms are altered when the bacteria express different extracellular biopolymers.
On nutritive hydrogels, micron-sized E. coli cells can build centimetre-large biofilms. During this process, bacterial proliferation and matrix production introduce mechanical stresses in the biofilm, which release through the formation of macroscopic wrinkles and delaminated buckles. To relate these biological and mechanical phenomena, I used time-lapse fluorescence imaging to track cell and matrix surface densities through the early and late stages of E. coli biofilm growth. Colocalization of high cell and matrix densities at the periphery precede the onset of mechanical instabilities at this annular region. Early growth is detected at this outer annulus, which was analysed by adding fluorescent microspheres to the bacterial inoculum. But only when high rates of matrix production are present in the biofilm centre, does overall biofilm spreading initiate along the solid-air interface. By tracking larger fluorescent particles for a long time, I could distinguish several kinematic stages of E. coli biofilm expansion and observed a transition from non-linear to linear velocity profiles, which precedes the emergence of wrinkles at the biofilm periphery. Decomposing particle velocities to their radial and circumferential components revealed a last kinematic stage, where biofilm movement is mostly directed towards the radial delaminated buckles, which verticalize. The resulting compressive strains computed in these regions were observed to substantially deform the underlying agar substrates. The co-localization of higher cell and matrix densities towards an annular region and the succession of several kinematic stages are thus expected to promote the emergence of mechanical instabilities at the biofilm periphery. These experimental findings are predicted to advance future modelling approaches of biofilm morphogenesis.
E. coli biofilm morphogenesis is further anticipated to depend on external stimuli from the environment. To clarify how the water could be used to tune biofilm material properties, we quantified E. coli biofilm growth, wrinkling dynamics and rigidity as a function of the water content of the nutritive substrates. Time-lapse microscopy and computational image analysis revealed that substrates with high water content promote biofilm spreading kinetics, while substrates with low water content promote biofilm wrinkling. The wrinkles observed on biofilm cross-sections appeared more bent on substrates with high water content, while they tended to be more vertical on substrates with low water content. Both wet and dry biomass, accumulated over 4 days of culture, were larger in biofilms cultured on substrates with high water content, despite extra porosity within the matrix layer. Finally, the micro-indentation analysis revealed that substrates with low water content supported the formation of stiffer biofilms. This study shows that E. coli biofilms respond to the water content of their substrate, which might be used for tuning their material properties in view of further applications.
Biofilm material properties further depend on the composition and structure of the matrix of extracellular proteins and polysaccharides. In particular, E. coli biofilms were suggested to present tissue-like elasticity due to a dense fibre network consisting of amyloid curli and phosphoethanolamine-modified cellulose. To understand the contribution of these components to the emergent mechanical properties of E. coli biofilms, we performed micro-indentation on biofilms grown from bacteria of several strains. Besides showing higher dry masses, larger spreading diameters and slightly reduced water contents, biofilms expressing both main matrix components also presented high rigidities in the range of several hundred kPa, similar to biofilms containing only curli fibres. In contrast, a lack of amyloid curli fibres provides much higher adhesive energies and more viscoelastic fluid-like material behaviour. Therefore, the combination of amyloid curli and phosphoethanolamine-modified cellulose fibres implies the formation of a composite material whereby the amyloid curli fibres provide rigidity to E. coli biofilms, whereas the phosphoethanolamine-modified cellulose rather acts as a glue. These findings motivate further studies involving purified versions of these protein and polysaccharide components to better understand how their interactions benefit biofilm functions.
All three studies depict different aspects of biofilm morphogenesis, which are interrelated. The first work reveals the correlation between non-uniform biological activities and the emergence of mechanical instabilities in the biofilm. The second work acknowledges the adaptive nature of E. coli biofilm morphogenesis and its mechanical properties to an environmental stimulus, namely water. Finally, the last study reveals the complementary role of the individual matrix components in the formation of a stable biofilm material, which not only forms complex morphologies but also functions as a protective shield for the bacteria it contains. Our experimental findings on E. coli biofilm morphogenesis and their mechanical properties can have further implications for fundamental and applied biofilm research fields.
Completely water-based systems are of interest for the development of novel material for various reasons: On one hand, they provide benign environment for biological systems and on the other hand they facilitate effective molecular transport in a membrane-free environment. In order to investigate the general potential of aqueous two-phase systems (ATPSs) for biomaterials and compartmentalized systems, various solid particles were applied to stabilize all-aqueous emulsion droplets. The target ATPS to be investigated should be prepared via mixing of two aqueous solutions of water-soluble polymers, which turn biphasic when exceeding a critical polymer concentration. Hydrophilic polymers with a wide range of molar mass such as dextran/poly(ethylene glycol) (PEG) can therefore be applied. Solid particles adsorbed at the interfaces can be exceptionally efficient stabilizers forming so-called Pickering emulsions, and nanoparticles can bridge the correlation length of polymer solutions and are thereby the best option for water-in-water emulsions.
The first approach towards the investigation of ATPS was conducted with all aqueous dextran-PEG emulsions in the presence of poly(dopamine) particles (PDP) in Chapter 4. The water-in-water emulsions were formed with a PEG/dextran system via utilizing PDP as stabilizers. Studies of the formed emulsions were performed via laser scanning confocal microscope (CLSM), optical microscope (OM), cryo-scanning electron microscope (SEM) and tensiometry. The stable emulsions (at least 16 weeks) were demulsified easily via dilution or surfactant addition. Furthermore, the solid PDP at the water-water interface were crosslinked in order to inhibit demulsification of the Pickering emulsion. Transmission electron microscope (TEM) and scanning electron microscope (SEM) were used to visualize the morphology of PDP before and after crosslinking. PDP stabilized water-in-water emulsions were utilized in the following Chapter 5 to form supramolecular compartmentalized hydrogels. Here, hydrogels were prepared in pre-formed water-in-water emulsions and gelled via α-cyclodextrin-PEG (α-CD-PEG) inclusion complex formation. Studies of the formed complexes were performed via X-ray powder diffraction (XRD) and the mechanical properties of the hydrogels were measured with oscillatory shear rheology. In order to verify the compartmentalized state and its triggered decomposition, hydrogels and emulsions were assessed via OM, SEM and CLSM. The last chapter broadens the investigations from the previous two systems by utilizing various carbon nitrides (CN) as different stabilizers in ATPS. CN introduces another way to trigger demulsification, namely irradiation with visible light. Therefore, emulsification and demulsification with various triggers were probed. The investigated all aqueous multi-phase systems will act as model for future fabrication of biocompatible materials, cell micropatterning as well as separation of compartmentalized systems.
This thesis aimed to investigate several fundamental and perplexing questions relating to the phloem loading and transport mechanisms of Cucurbita maxima, by combining metabolomic analysis with cell biological techniques. This putative symplastic loading species has long been used for experiments on phloem anatomy, phloem biochemistry, phloem transport physiology and phloem signalling. Symplastic loading species have been proposed to use a polymer trapping mechanism to accumulate RFO (raffinose family oligosaccharides) sugars to build up high osmotic pressure in minor veins which sustains a concentration gradient that drives mass flow. However, extensive evidence indicating a low sugar concentration in their phloem exudates is a long-known problem that conflicts with this hypothesis. Previous metabolomic analysis shows the concentration of many small molecules in phloem exudates is higher than that of leaf tissues, which indicates an active apoplastic loading step. Therefore, in the view of the phloem metabolome, a symplastic loading mechanism cannot explain how small molecules other than RFO sugars are loaded into phloem. Most studies of phloem physiology using cucurbits have neglected the possible functions of vascular architecture in phloem transport. It is well known that there are two phloem systems in cucurbits with distinctly different anatomical features: central phloem and extrafascicular phloem. However, mistaken conclusions on sources of cucurbit phloem exudation from previous reports have hindered consideration of the idea that there may be important differences between these two phloem systems. The major results are summarized as below: 1) O-linked glycans in C.maxima were structurally identified as beta-1,3 linked glucose polymers, and the composition of glycans in cucurbits was found to be species-specific. Inter-species grafting experiments proved that these glycans are phloem mobile and transported uni-directionally from scion to stock. 2) As indicated by stable isotopic labelling experiments, a considerable amount of carbon is incorporated into small metabolites in phloem exudates. However, the incorporation of carbon into RFO sugars is much faster than for other metabolites. 3) Both CO2 labelling experiments and comparative metabolomic analysis of phloem exudates and leaf tissues indicated that metabolic processes other than RFO sugar metabolism play an important role in cucurbit phloem physiology. 4) The underlying assumption that the central phloem of cucurbits continuously releases exudates after physical incision was proved wrong by rigorous experiments including direct observation by normal microscopy and combined multiple-microscopic methods. Errors in previous experimental confirmation of phloem exudation in cucurbits are critically discussed. 5) Extrafascicular phloem was proved to be functional, as indicated by phloem-mobile carboxyfluorescein tracer studies. Commissural sieve tubes interconnect phloem bundles into a complete super-symplastic network. 6) Extrafascicular phloem represents the main source of exudates following physical incision. The major transported metabolites by these extrafacicular phloem are non-sugar compounds including amino acids, O-glycans, amines. 7) Central phloem contains almost exclusively RFO sugars, the estimated amount of which is up to 1 to 2 molar. The major RFO sugar present in central phloem is stachyose. 8) Cucurbits utilize two structurally different phloem systems for transporting different group of metabolites (RFO sugars and non-RFO sugar compounds). This implies that cucurbits may use spatially separated loading mechanisms (apoplastic loading for extrafascicular phloem and symplastic loading for central phloem) for supply of nutrients to sinks. 9) Along the transport systems, RFO sugars were mainly distributed within central phloem tissues. There were only small amounts of RFO sugars present in xylem tissues (millimolar range) and trace amounts of RFO sugars in cortex and pith. The composition of small molecules in external central phloem is very different from that in internal central phloem. 10) Aggregated P-proteins were manually dissected from central phloem and analysed by both SDS-PAGE and mass spectrometry. Partial sequences of peptides were obtained by QTOF de novo sequencing from trypsin digests of three SDS-PAGE bands. None of these partial sequences shows significant homology to known cucurbit phloem proteins or other plant proteins. This proves that these central phloem proteins are a completely new group of proteins different from those in extrafascicular phloem. The extensively analysed P-proteins reported in literature to date are therefore now shown to arise from extrafascicular phloem and not central phloem, and therefore do not appear to be involved in the occlusion processes in central phloem.
This work describes the realization of physically crosslinked networks based on gelatin by the introduction of functional groups enabling specific supramolecular interactions. Molecular models were developed in order to predict the material properties and permit to establish a knowledge-based approach to material design. The effect of additional supramolecular interactions with hydroxyapaptite was then studied in composite materials. The calculated properties are compared to experimental results to validate the models. The models are then further used for the study of physically crosslinked networks. Gelatin was functionalized with desaminotyrosine (DAT) and desaminotyrosyl-tyrosine (DATT) side groups, derived from the natural amino acid tyrosine. These group can potentially undergo to π-π and hydrogen bonding interactions also under physiological conditions. Molecular dynamics (MD) simulations were performed on models with 0.8 wt.-% or 25 wt.-% water content, using the second generation forcefield CFF91. The validation of the models was obtained by the comparison with specific experimental data such as, density, peptide conformational angles and X-ray scattering spectra. The models were then used to predict the supramolecular organization of the polymer chain, analyze the formation of physical netpoints and calculate the mechanical properties. An important finding of simulation was that with the increase of aromatic groups also the number of observed physical netpoints increased. The number of relatively stable physical netpoints, on average zero 0 for natural gelatin, increased to 1 and 6 for DAT and DATT functionalized gelatins respectively. A comparison with the Flory-Rehner model suggested reduced equilibrium swelling by factor 6 of the DATT-functionalized materials in water. The functionalized gelatins could be synthesized by chemoselective coupling of the free carboxylic acid groups of DAT and DATT to the free amino groups of gelatin. At 25 wt.-% water content, the simulated and experimentally determined elastic mechanical properties (e.g. Young Modulus) were both in the order of GPa and were not influenced by the degree of aromatic modification. The experimental equilibrium degree of swelling in water decreased with increasing the number of inserted aromatic functions (from 2800 vol.-% for pure gelatin to 300 vol.-% for the DATT modified gelatin), at the same time, Young’s modulus, elongation at break, and maximum tensile strength increased. It could be show that the functionalization with DAT and DATT influences the chain organization of gelatin based materials together with a controlled drying condition. Functionalization with DAT and DATT lead to a drastic reduction of helical renaturation, that could be more finely controlled by the applied drying conditions. The properties of the materials could then be influenced by application of two independent methods. Composite materials of DAT and DATT functionalized gelatins with hydroxyapatite (HAp) show a drastic reduction of swelling degree. In tensile tests and rheological measurements, the composites equilibrated in water had increased Young’s moduli (from 200 kPa up to 2 MPa) and tensile strength (from 57 kPa up to 1.1 MPa) compared to the natural polymer matrix without affecting the elongation at break. Furthermore, an increased thermal stability from 40 °C to 85 °C of the networks could be demonstrated. The differences of the behaviour of the functionalized gelatins to pure gelatin as matrix suggested an additional stabilizing bond between the incorporated aromatic groups to the hydroxyapatite.
In this work, the role of the TusA protein was investigated for the cell functionality and FtsZ ring assembly in Escherichia coli. TusA is the tRNA-2-thiouridine synthase that acts as a sulfur transferase in tRNA thiolation for the formation of 2-thiouridine at the position 34 (wobble base) of tRNALys, tRNAGlu and tRNAGln. It binds the persulfide form of sulfur and transfers it to further proteins during mnm5s2U tRNA modification at wobble position and for Moco biosynthesis. With this thiomodification of tRNA, the ribosome binding is more efficient and frameshifting is averted during the protein translation. Previous studies have revealed an essential role of TusA in bacterial cell physiology since deletion of the tusA gene resulted in retarded growth and filamentous cells during the exponential growth phase in a rich medium which suddenly disappeared during the stationary phase. This indicates a problem in the cell division process. Therefore the focus of this work was to investigate the role of TusA for cell functionality and FtsZ ring formation and thus the cell separation.
The reason behind the filamentous growth of the tusA mutant strain was investigated by growth and morphological analyses. ΔtusA cells showed a retarded growth during the exponential phase compared to the WT strain. Also, morphological analysis of ΔtusA cells confirmed the filamentous cell shape. The growth and cell division defects in ΔtusA indicated a defect in FtsZ protein as a key player of cell division. The microscopic investigation revealed that filamentous ΔtusA cells possessed multiple DNA parts arranged next to each other. This suggested that although the DNA replication occurred correctly, there was a defect in the step where FtsZ should act; probably FtsZ is unable to assemble to the ring structure or the assembled ring is not able to constrict. All tested mutant strains (ΔtusD, ΔtusE and ΔmnmA) involved in the mnm5s2U34 tRNA modification pathway shared the similar retarded growth and filamentous cell shape like ΔtusA strain. Thus, the cell division defect arises from a defect in mnm5s2U34 tRNA thiolation.
Since the FtsZ ring formation was supposed to be defective in filaments, a possible intracellular interaction of TusA and FtsZ was examined by fluorescent (EGFP and mCherry) fusion proteins expression and FRET. FtsZ expressing tusA mutant (DE3) cells showed a red mCherry signal at the cell poles, indicating that FtsZ is still in the assembling phase. Interestingly, the cellular region of EGFP-TusA fusion protein expressed in ΔtusA (DE3) was conspicuous; the EGFP signal was spread throughout the whole cell and, in addition, a slight accumulation of the EGFP-TusA fluorescence was detectable at the cell poles, the same part of the cell as for mCherry-FtsZ. Thus, this strongly suggested an interaction of TusA and FtsZ.
Furthermore, the cellular FtsZ and Fis concentrations, and their change during different growth phases were determined via immunoblotting. All tested deletion strains of mnm5s2U34 tRNA modification show high cellular FtsZ and Fis levels in the exponential phase, shifting to the later growth phases. This shift reflects the retarded growth, whereby the deletion strains reach later the exponential phase. Conclusively, the growth and cell division defect, and thus the formation of filaments, is most likely caused by changes in the cellular FtsZ and Fis concentrations.
Finally, the translation efficiencies of certain proteins (RpoS, Fur, Fis and mFis) in tusA mutant and in additional gene deletion strains were studied whether they were affected by using unmodified U34 tRNAs of Lys, Glu and Gln. The translation efficiency is decreased in mnm5s2U34 tRNA modification-impaired strains in addition to their existing growth and cell division defect due to the elimination of these three amino acids. Finally, these results confirm and reinforce the importance of Lys, Glu and Gln and the mnm5s2U34 tRNA thiolation for efficient protein translation. Thus, these findings verify that the translation of fur, fis and rpoS is regulated by mnm5s2U34 tRNA modifications, which is growth phase-dependent.
In total, this work showed the importance of the role of TusA for bacterial cell functionality and physiology. The deletion of the tusA gene disrupted a complex regulatory network within the cell, that most influenced by the decreased translation of Fis and RpoS, caused by the absence of mnm5s2U34 tRNA modifications. The disruption of RpoS and Fis cellular network influences in turn the cellular FtsZ level in the early exponential phase. Finally, the reduced FtsZ concentration leads to elongated, filamentous E. coli cells, which are unable to divide.
The transcriptional regulation of the cellular mechanisms involves many different components and different levels of control which together contribute to fine tune the response of cells to different environmental stimuli. In some responses, diverse signaling pathways can be controlled simultaneously. One of the most important cellular processes that seem to possess multiple levels of regulation is photosynthesis. A model organism for studying photosynthesis-related processes is the unicellular green algae Chlamydomonas reinhardtii, due to advantages related to culturing, genetic manipulation and availability of genome sequence. In the present study, we were interested in understanding the regulatory mechanisms underlying photosynthesis-related processes. To achieve this goal different molecular approaches were followed. In order to indentify protein transcriptional regulators we optimized a method for isolation of nuclei and performed nuclear proteome analysis using shotgun proteomics. This analysis permitted us to improve the genome annotation previously published and to discover conserved and enriched protein motifs among the nuclear proteins. In another approach, a quantitative RT-PCR platform was established for the analysis of gene expression of predicted transcription factor (TF) and other transcriptional regulator (TR) coding genes by transcript profiling. The gene expression profiles for more than one hundred genes were monitored in time series experiments under conditions of changes in light intensity (200 µE m-2 s-1 to 700 µE m-2 s-1), and changes in concentration of carbon dioxide (5% CO2 to 0.04% CO2). The results indicate that many TF and TR genes are regulated in both environmental conditions and groups of co-regulated genes were found. Our findings also suggest that some genes can be common intermediates of light and carbon responsive regulatory pathways. These approaches together gave us new insights about the regulation of photosynthesis and revealed new candidate regulatory genes, helping to decipher the gene regulatory networks in Chlamydomonas. Further experimental studies are necessary to clarify the function of the candidate regulatory genes and to elucidate how cells coordinately regulate the assimilation of carbon and light responses.
There is already strong evidence that temperate lakes have been highly vulnerable to human induced climate warming during the last century. Hitherto climate impact studies have mainly focussed on the impacts of the recent long-term warming in winter and spring and little is known on the influence of climate warming on temperate lakes in summer. In the present thesis, I studied some aspects, which may have been strongly involved in determining the response of a lake to climate warming in summer. Thereby I have focussed on climate induced impacts on the thermal characteristics and the phenology and abundance of summer plankton in a shallow polymictic lake (Müggelsee, Germany). First, the influence of climate warming on the phenology and abundance of the lake plankton was investigated across seasons. Fast-growing spring phytoplankton and zooplankton (Daphnia) advanced largely synchronously, whereas long-term changes in the phenology of slow-growing summer zooplankton were clearly species-specific and not synchronised. The phenology and/or abundance of several summer copepod species changed according to their individual thermal requirements at decisive developmental stages such as emergence from diapause in spring. The study emphasises that not only the degree of warming, but also its timing within the annual cycle is of great ecological importance. To analyse the impact of climate change on the thermal characteristics of the lake, I examined the long-term development of the daily epilimnetic temperature extrema during summer. The study demonstrated for the first time for lakes that the daily epilimnetic minima (during nighttime) have increased more rapidly than the daily epilimnetic maxima (during daytime), resulting in a distinct decrease in the daily epilimnetic temperature range. This day-night asymmetry in epilimnetic temperature was likely caused by an increased nighttime emission of long-wave radiation from the atmosphere. This underlines that not only increases in air temperature, but also changes in other meteorological variables such as wind speed, relative humidity and cloud cover may play an important role in determining the lake temperature with respect to further climate change. Furthermore, a short-term analysis on the mixing regime of the polymictic lake was conducted to examine the frequency and duration of stratification events and their impacts on dissolved oxygen, dissolved nutrients and summer phytoplankton. Even during the longest stratification events (heatwaves in 2003 and 2006) the thermal characteristics of the lake differed from those typically found in shallow dimictic lakes, which exhibit a continuous stratification during summer. Particularly, hypolimnetic temperatures were higher, favouring the depletion of oxygen and the accumulation of dissolved nutrient in the hypolimnion. Thermal stratification will be very likely amplified in the future, thus, I conclude that polymictic lakes will be very vulnerable to alterations in the thermal regime with respect to projections of further climate change during summer. Finally, a long-term case study on the long and short-term changes in the development of the planktonic larvae of the freshwater mussel Dreissena polymorpha was performed to analyse the impacts of simultaneous changes in the thermal and in the trophic regime of the lake. Both the climate warming and the decrease in external nutrient load were important in determining the abundance of the pelagic larvae by affecting different features of the life-history of this species throughout the warm season. The long-term increase in the abundance and length of larvae was related to the decrease in external nutrient loading and the change in phytoplankton composition. However, the recent heatwaves in 2003 and 2006 have offset this positive effect on larval abundance, due to unfavourable low oxygen concentrations that had resulted from extremely long stratification events, mimicking the effects of nutrient enrichment. Climate warming may thus induce counteracting effects in productive shallow lakes that underwent lake restoration through a decrease in external nutrient loading. I conclude that not only the nature of climate change and thus the timing of climate warming throughout the seasons and the occurrence of climatic extremes as heatwaves, but also site-specific lake conditions as the thermal mixing regime and the trophic state are crucial factors governing the impacts of climate warming on internal lake processes during summer. Consequently, further climate impact research on lake functioning should focus on how the different lake types respond to the complex environmental forcing in summer, to allow for a comprehensive understanding of human induced environmental changes in lakes.
Plant metabolism is the main process of converting assimilated carbon to different crucial compounds for plant growth and therefore crop yield, which makes it an important research topic. Although major advances in understanding genetic principles contributing to metabolism and yield have been made, little is known about the genetics responsible for trait variation or canalization although the concepts have been known for a long time. In light of a growing global population and progressing climate change, understanding canalization of metabolism and yield seems ever-more important to ensure food security. Our group has recently found canalization metabolite quantitative trait loci (cmQTL) for tomato fruit metabolism, showing that the concept of canalization applies on metabolism. In this work two approaches to investigate plant metabolic canalization and one approach to investigate yield canalization are presented.
In the first project, primary and secondary metabolic data from Arabidopsis thaliana and Phaseolus vulgaris leaf material, obtained from plants grown under different conditions was used to calculate cross-environment coefficient of variations or fold-changes of metabolite levels per genotype and used as input for genome wide association studies. While primary metabolites have lower CV across conditions and show few and mostly weak associations to genomic regions, secondary metabolites have higher CV and show more, strong metabolite to genome associations. As candidate genes, both potential regulatory genes as well as metabolic genes, can be found, albeit most metabolic genes are rarely directly related to the target metabolites, suggesting a role for both potential regulatory mechanisms as well as metabolic network structure for canalization of metabolism.
In the second project, candidate genes of the Solanum lycopersicum cmQTL mapping are selected and CRISPR/Cas9-mediated gene-edited tomato lines are created, to validate the genes role in canalization of metabolism. Obtained mutants appeared to either have strong aberrant developmental phenotypes or appear wild type-like. One phenotypically inconspicuous mutant of a pantothenate kinase, selected as candidate for malic acid canalization shows a significant increase of CV across different watering conditions. Another such mutant of a protein putatively involved in amino acid transport, selected as candidate for phenylalanine canalization shows a similar tendency to increased CV without statistical significance. This potential role of two genes involved in metabolism supports the hypothesis of structural relevance of metabolism for its own stability.
In the third project, a mutant for a putative disulfide isomerase, important for thylakoid biogenesis, is characterized by a multi-omics approach. The mutant was characterized previously in a yield stability screening and showed a variegated leaf phenotype, ranging from green leaves with wild type levels of chlorophyll over differently patterned variegated to completely white leaves almost completely devoid of photosynthetic pigments. White mutant leaves show wild type transcript levels of photosystem assembly factors, with the exception of ELIP and DEG orthologs indicating a stagnation at an etioplast to chloroplast transition state. Green mutant leaves show an upregulation of these assembly factors, possibly acting as overcompensation for partially defective disulfide isomerase, which seems sufficient for proper chloroplast development as confirmed by a wild type-like proteome. Likely as a result of this phenotype, a general stress response, a shift to a sink-like tissue and abnormal thylakoid membranes, strongly alter the metabolic profile of white mutant leaves. As the severity and pattern of variegation varies from plant to plant and may be effected by external factors, the effect on yield instability, may be a cause of a decanalized ability to fully exploit the whole leaf surface area for photosynthetic activity.
Electron transfer (ET) reactions play a crucial role in the metabolic pathways of all organisms. In biotechnological approaches, the redox properties of the protein cytochrome c (cyt c), which acts as an electron shuttle in the respiratory chain, was utilized to engineer ET chains on electrode surfaces. With the help of the biopolymer DNA, the redox protein assembles into electro active multilayer (ML) systems, providing a biocompatible matrix for the entrapment of proteins.
In this study the characteristics of the cyt c and DNA interaction were defined on the molecular level for the first time and the binding sites of DNA on cyt c were identified. Persistent cyt c/DNA complexes were formed in solution under the assembly conditions of ML architectures, i.e. pH 5.0 and low ionic strength. At pH 7.0, no agglomerates were formed, permitting the characterization of the NMR spectroscopy. Using transverse relaxation-optimized spectroscopy (TROSY)-heteronuclear single quantum coherence (HSQC) experiments, DNAs’ binding sites on the protein were identified. In particular, negatively charged AA residues, which are known interaction sites in cyt c/protein binding were identified as the main contact points of cyt c and DNA.
Moreover, the sophisticated task of arranging proteins on electrode surfaces to create functional ET chains was addressed. Therefore, two different enzyme types, the flavin dependent fructose dehydrogenase (FDH) and the pyrroloquinoline quinone dependent glucose dehydrogenase (PQQ-GDH), were tested as reaction partners of freely diffusing cyt c and cyt c immobilized on electrodes in mono- and MLs. The characterisation of the ET processes was performed by means of electrochemistry and the protein deposition was monitored by microgravimetric measurements. FDH and PQQ-GDH were found to be generally suitable for combination with the cyt c/DNA ML system, since both enzymes interact with cyt c in solution and in the immobilized state. The immobilization of FDH and cyt c was achieved with the enzyme on top of a cyt c monolayer electrode without the help of a polyelectrolyte. Combining FDH with the cyt c/DNA ML system did not succeed, yet. However, the basic conditions for this protein-protein interaction were defined. PQQ-GDH was successfully coupled with the ML system, demonstrating that that the cyt c/DNA ML system provides a suitable interface for enzymes and that the creation of signal chains, based on the idea of co-immobilized proteins is feasible.
Future work may be directed to the investigation of cyt c/DNA interaction under the precise conditions of ML assembly. Therefore, solid state NMR or X-ray crystallography may be required. Based on the results of this study, the combination of FDH with the ML system should be addressed. Moreover, alternative types of enzymes may be tested as catalytic component of the ML assembly, aiming on the development of innovative biosensor applications.
The sequencing of the human genome in the early 2000s led to an increased interest in cheap and fast sequencing technologies. This interest culminated in the advent of next generation sequencing (NGS). A number of different NGS platforms have arisen since then all promising to do the same thing, i.e. produce large amounts of genetic information for relatively low costs compared to more traditional methods such as Sanger sequencing. The capabilities of NGS meant that researchers were no longer bound to species for which a lot of previous work had already been done (e.g. model organisms and humans) enabling a shift in research towards more novel and diverse species of interest. This capability has greatly benefitted many fields within the biological sciences, one of which being the field of evolutionary biology. Researchers have begun to move away from the study of laboratory model organisms to wild, natural populations and species which has greatly expanded our knowledge of evolution. NGS boasts a number of benefits over more traditional sequencing approaches. The main benefit comes from the capability to generate information for drastically more loci for a fraction of the cost. This is hugely beneficial to the study of wild animals as, even when large numbers of individuals are unobtainable, the amount of data produced still allows for accurate, reliable population and species level results from a small selection of individuals.
The use of NGS to study species for which little to no previous research has been carried out on and the production of novel evolutionary information and reference datasets for the greater scientific community were the focuses of this thesis. Two studies in this thesis focused on producing novel mitochondrial genomes from shotgun sequencing data through iterative mapping, bypassing the need for a close relative to serve as a reference sequence. These mitochondrial genomes were then used to infer species level relationships through phylogenetic analyses. The first of these studies involved reconstructing a complete mitochondrial genome of the bat eared fox (Otocyon megalotis). Phylogenetic analyses of the mitochondrial genome confidently placed the bat eared fox as sister to the clade consisting of the raccoon dog and true foxes within the canidae family. The next study also involved reconstructing a mitochondrial genome but in this case from the extinct Macrauchenia of South America. As this study utilised ancient DNA, it involved a lot of parameter testing, quality controls and strict thresholds to obtain a near complete mitochondrial genome devoid of contamination known to plague ancient DNA studies. Phylogenetic analyses confidently placed Macrauchenia as sister to all living representatives of Perissodactyla with a divergence time of ~66 million years ago. The third and final study of this thesis involved de novo assemblies of both nuclear and mitochondrial genomes from brown and striped hyena and focussed on demographic, genetic diversity and population genomic analyses within the brown hyena. Previous studies of the brown hyena hinted at very low levels of genomic diversity and, perhaps due to this, were unable to find any notable population structure across its range. By incorporating a large number of genetic loci, in the form of complete nuclear genomes, population structure within the brown hyena was uncovered. On top of this, genomic diversity levels were compared to a number of other species. Results showed the brown hyena to have the lowest genomic diversity out of all species included in the study which was perhaps caused by a continuous and ongoing decline in effective population size that started about one million years ago and dramatically accelerated towards the end of the Pleistocene.
The studies within this thesis show the power NGS sequencing has and its utility within evolutionary biology. The most notable capabilities outlined in this thesis involve the study of species for which no reference data is available and in the production of large amounts of data, providing evolutionary answers at the species and population level that data produced using more traditional techniques simply could not.
Methane is an important greenhouse gas contributing to global climate change. Natural environments and restored wetlands contribute a large proportion to the global methane budget. Methanogenic archaea (methanogens) and methane oxidizing bacteria (methanotrophs), the biogenic producers and consumers of methane, play key roles in the methane cycle in those environments. A large number of studies revealed the distribution, diversity and composition of these microorganisms in individual habitats. However, uncertainties exist in predicting the response and feedback of methane-cycling microorganisms to future climate changes and related environmental changes due to the limited spatial scales considered so far, and due to a poor recognition of the biogeography of these important microorganisms combining global and local scales.
With the aim of improving our understanding about whether and how methane-cycling microbial communities will be affected by a series of dynamic environmental factors in response to climate change, this PhD thesis investigates the biogeographic patterns of methane-cycling communities, and the driving factors which define these patterns at different spatial scales. At the global scale, a meta-analysis was performed by implementing 94 globally distributed public datasets together with environmental data from various natural environments including soils, lake sediments, estuaries, marine sediments, hydrothermal sediments and mud volcanos. In combination with a global biogeographic map of methanogenic archaea from multiple natural environments, this thesis revealed that biogeographic patterns of methanogens exist. The terrestrial habitats showed higher alpha diversities than marine environments. Methanoculleus and Methanosaeta (Methanothrix) are the most frequently detected taxa in marine habitats, while Methanoregula prevails in terrestrial habitats. Estuary ecosystems, the transition zones between marine and terrestrial/limnic ecosystems, have the highest methanogenic richness but comparably low methane emission rates. At the local scale, this study compared two rewetted fens with known high methane emissions in northeastern Germany, a coastal brackish fen (Hütelmoor) and a freshwater riparian fen (Polder Zarnekow). Consistent with different geochemical conditions and land-use history, the two rewetted fens exhibit dissimilar methanogenic and, especially, methanotrophic community compositions. The methanotrophic community was generally under-represented among the prokaryotic communities and both fens show similarly low ratios of methanotrophic to methanogenic abundances. Since few studies have characterized methane-cycling microorganisms in rewetted fens, this study provides first evidence that the rapid and well re-established methanogenic community in combination with the low and incomplete re-establishment of the methanotrophic community after rewetting contributes to elevated sustained methane fluxes following rewetting.
Finally, this thesis demonstrates that dispersal limitation only slightly regulates the biogeographic distribution patterns of methanogenic microorganisms in natural environments and restored wetlands. Instead, their existence, adaption and establishment are more associated with the selective pressures under different environmental conditions. Salinity, pH and temperature are identified as the most important factors in shaping microbial community structure at different spatial scales (global versus terrestrial environments). Predicted changes in climate, such as increasing temperature, changes in precipitation patterns and increasing frequency of flooding events, are likely to induce a series of environmental alterations, which will either directly or indirectly affect the driving environmental forces of methanogenic communities, leading to changes in their community composition and thus potentially also in methane emission patterns in the future.
The NAC transcription factor (TF) JUNGBRUNNEN1 (JUB1) is an important negative regulator of plant senescence, as well as of gibberellic acid (GA) and brassinosteroid (BR) biosynthesis in Arabidopsis thaliana. Overexpression of JUB1 promotes longevity and enhances tolerance to drought and other abiotic stresses. A similar role of JUB1 has been observed in other plant species, including tomato and banana. Our data show that JUB1 overexpressors (JUB1-OXs) accumulate higher levels of proline than WT plants under control conditions, during the onset of drought stress, and thereafter. We identified that overexpression of JUB1 induces key proline biosynthesis and suppresses key proline degradation genes. Furthermore, bZIP63, the transcription factor involved in proline metabolism, was identified as a novel downstream target of JUB1 by Yeast One-Hybrid (Y1H) analysis and Chromatin immunoprecipitation (ChIP). However, based on Electrophoretic Mobility Shift Assay (EMSA), direct binding of JUB1 to bZIP63 could not be confirmed. Our data indicate that JUB1-OX plants exhibit reduced stomatal conductance under control conditions. However, selective overexpression of JUB1 in guard cells did not improve drought stress tolerance in Arabidopsis. Moreover, the drought-tolerant phenotype of JUB1 overexpressors does not solely depend on the transcriptional control of the DREB2A gene. Thus, our data suggest that JUB1 confers tolerance to drought stress by regulating multiple components. Until today, none of the previous studies on JUB1´s regulatory network focused on identifying protein-protein interactions. We, therefore, performed a yeast two-hybrid screen (Y2H) which identified several protein interactors of JUB1, two of which are the calcium-binding proteins CaM1 and CaM4. Both proteins interact with JUB1 in the nucleus of Arabidopsis protoplasts. Moreover, JUB1 is expressed with CaM1 and CaM4 under the same conditions. Since CaM1.1 and CaM4.1 encode proteins with identical amino acid sequences, all further experiments were performed with constructs involving the CaM4 coding sequence. Our data show that JUB1 harbors multiple CaM-binding sites, which are localized in both the N-terminal and C-terminal regions of the protein. One of the CaM-binding sites, localized in the DNA-binding domain of JUB1, was identified as a functional CaM-binding site since its mutation strongly reduced the binding of CaM4 to JUB1. Furthermore, JUB1 transactivates expression of the stress-related gene DREB2A in mesophyll cells; this effect is significantly reduced when the calcium-binding protein CaM4 is expressed as well. Overexpression of both genes in Arabidopsis results in early senescence observed through lower chlorophyll content and an enhanced expression of senescence-associated genes (SAGs) when compared with single JUB1 overexpressors. Our data also show that JUB1 and CaM4 proteins interact in senescent leaves, which have increased Ca2+ levels when compared to young leaves. Collectively, our data indicate that JUB1 activity towards its downstream targets is fine-tuned by calcium-binding proteins during leaf senescence.
The aim of this thesis is the design, expression and purification of human cytochrome c mutants and their characterization with regard to electrochemical and structural properties as well as with respect to the reaction with the superoxide radical and the selected proteins sulfite oxidase from human and fungi bilirubin oxidase. All three interaction partners are studied here for the first time with human cyt c and with mutant forms of cyt c. A further aim is the incorporation of the different cyt c forms in two bioelectronic systems: an electrochemical superoxide biosensor with an enhanced sensitivity and a protein multilayer assembly with and without bilirubin oxidase on electrodes. The first part of the thesis is dedicated to the design, expression and characterization of the mutants. A focus is here the electrochemical characterization of the protein in solution and immobilized on electrodes. Further the reaction of these mutants with superoxide was investigated and the possible reaction mechanisms are discussed. In the second part of the work an amperometric superoxide biosensor with selected human cytochrome c mutants was constructed and the performance of the sensor electrodes was studied. The human wild-type and four of the five mutant electrodes could be applied successfully for the detection of the superoxide radical. In the third part of the thesis the reaction of horse heart cyt c, the human wild-type and seven human cyt c mutants with the two proteins sulfite oxidase and bilirubin oxidase was studied electrochemically and the influence of the mutations on the electron transfer reactions was discussed. Finally protein multilayer electrodes with different cyt form including the mutant forms G77K and N70K which exhibit different reaction rates towards BOD were investigated and BOD together with the wild-type and engineered cyt c was embedded in the multilayer assembly. The relevant electron transfer steps and the kinetic behavior of the multilayer electrodes are investigated since the functionality of electroactive multilayer assemblies with incorporated redox proteins is often limited by the electron transfer abilities of the proteins within the multilayer. The formation via the layer-by-layer technique and the kinetic behavior of the mono and bi-protein multilayer system are studied by SPR and cyclic voltammetry. In conclusion this thesis shows that protein engineering is a helpful instrument to study protein reactions as well as electron transfer mechanisms of complex bioelectronic systems (such as bi-protein multilayers). Furthermore, the possibility to design tailored recognition elements for the construction of biosensors with an improved performance is demonstrated.
In semi-arid savannah ecosystems, the vegetation structure and composition, i.e. the architecture of trees, shrubs, grass tussocks and herbaceous plants, offer a great variety of habitats and niches to sustain animal diversity. In the last decades intensive human land use practises like livestock farming have altered the vegetation in savannah ecosystems worldwide. Extensive grazing leads to a reduction of the perennial and herbaceous vegetation cover, which results in an increased availability of bare soil. Both, the missing competition with perennial grasses and the increase of bare soils favour shrub on open ground and lead to area-wide shrub encroachment. As a consequence of the altered vegetation structure and composition, the structural diversity declines. It has been shown that with decreasing structural diversity animal diversity decline across a variety of taxa. Knowledge on the effects of overgrazing on reptiles, which are an important part of the ecosystem, are missing. Furthermore, the impact of habitat degradation on factors of a species population dynamic and life history, e.g., birth rate, survival rate, predation risk, space requirements or behavioural adaptations are poorly known. Therefore, I investigated the impact of overgrazing on the reptile community in the southern Kalahari. Secondly I analysed population dynamics and the behaviour of the Spotted Sand Lizard, Pedioplanis l. lineoocellata. All four chapters clearly demonstrate that habitat degradation caused by overgrazing had a severe negative impact upon (i) the reptile community as a whole and (ii) on population parameters of Pedioplanis l. lineoocellata. Chapter one showed a significant decline of regional reptile diversity and abundance in degraded habitats. In chapter two I demonstrated that P. lineoocellata moves more frequently, spends more time moving and covers larger distances in degraded than in non-degraded habitats. In addition, home range size of the lizard species increases in degraded habitats as shown by chapter three. Finally, chapter four showed the negative impacts of overgrazing on several population parameters of P. lineoocellata. Absolute population size of adult and juvenile lizards, survival rate and birth rate are significantly lower in degraded habitats. Furthermore, the predation risk was greatly increased in degraded habitats. A combination of a variety of aspects can explain the negative impact of habitat degradation on reptiles. First, reduced prey availability negatively affects survival rate, the birth rate and overall abundance. Second, the loss of perennial plant cover leads to a loss of niches and to a reduction of opportunities to thermoregulate. Furthermore, a loss of cover and is associated with increased predation risk. A major finding of my thesis is that the lizard P. lineoocellata can alter its foraging strategy. Species that are able to adapt and change behaviour, such as P. lineoocellata can effectively buffer against changes in their environment. Furthermore, perennial grass cover can be seen as a crucial ecological component of the vegetation in the semi-arid savannah system of the southern Kalahari. If perennial grass cover is reduced to a certain degree reptile diversity will decline and most other aspects of reptile life history will be negatively influenced. Savannah systems are characterised by a mixture of trees, shrubs and perennial grasses. These three vegetation components determine the composition and structure of the vegetation and accordingly influence the faunal diversity. Trees are viewed as keystone structures and focal points of animal activity for a variety of species. Trees supply animals with shelter, shade and food and act as safe sites, nesting sites, observation posts and foraging sites. Recent research demonstrates a positive influence of shrub patches on animal diversity. Moreover, it would seem that intermediate shrub cover can also sustain viable populations in savannah landscapes as has been demonstrated for small carnivores and rodent species. The influence of perennial grasses on faunal diversity did not receive the same attention as the influence of trees and shrubs. In my thesis I didn’t explicitly measure the direct effects of perennial grasses but my results strongly imply that it has an important role. If the perennial grass cover is significantly depleted my results suggest it will negatively influence reptile diversity and abundance and on several populations parameters of P. lineoocellata. Perennial grass cover is associated with the highest prey abundance, reptile diversity and reptile abundance. It provides reptiles both a refuge from predators and opportunities to optimise thermoregulation. The relevance of each of the three vegetation structural elements is different for each taxa and species. In conclusion, I can all three major vegetation structures in the savannah system are important for faunal diversity.
Subcellular compartmentation of primary carbon metabolism in mesophyll cells of Arabidopsis thaliana
(2011)
Metabolism in plant cells is highly compartmented, with many pathways involving reactions in more than one compartment. For example, during photosynthesis in leaf mesophyll cells, primary carbon fixation and starch synthesis take place in the chloroplast, whereas sucrose is synthesized in the cytosol and stored in the vacuole. These reactions are tightly regulated to keep a fine balance between the carbon pools of the different compartments and to fulfil the energy needs of the organelles. I applied a technique which fractionates the cells under non-aqueous conditions, whereby the metabolic state is frozen at the time of harvest and held in stasis throughout the fractionation procedure. With the combination of non-aqueous fractionation and mass spectrometry based metabolite measurements (LC-MS/MS, GC-MS) it was possible to investigate the intracellular distributions of the intermediates of photosynthetic carbon metabolism and its products in subsequent metabolic reactions. With the knowledge about the in vivo concentrations of these metabolites under steady state photosynthesis conditions it was possible to calculate the mass action ratio and change in Gibbs free energy in vivo for each reaction in the pathway, to determine which reactions are near equilibrium and which are far removed from equilibrium. The Km value and concentration of each enzyme were compared with the concentrations of its substrates in vivo to assess which reactions are substrate limited and so sensitive to changes in substrate concentration. Several intermediates of the Calvin-Benson cycle are substrates for other pathways, including dihydroxyacetone-phosphate (DHAP,sucrose synthesis), fructose 6-phosphate (Fru6P, starch synthesis), erythrose 4-phosphate (E4P,shikimate pathway) and ribose 5-phosphate (R5P, nucleotide synthesis). Several of the enzymes that metabolise these intermediates, and so lie at branch points in the pathway, are triose-phosphate isomerase (DHAP), transketolase (E4P, Fru6P), sedoheptulose-1,7-bisphosphate aldolase (E4P) and ribose-5-phosphate isomerase (R5P) are not saturated with their respective substrate as the metabolite concentration is lower than the respective Km value. In terms of metabolic control these are the steps that are most sensitive to changes in substrate availability, while the regulated irreversible reactions of fructose-1,6-bisphosphatase and sedoheptulose-1,7-bisphosphatase are relatively insensitive to changes in the concentrations of their substrates. In the pathway of sucrose synthesis it was shown that the concentration of the catalytic binding site of the cytosolic aldolase is lower than the substrate concentration of DHAP, and that the concentration of Suc6P is lower than the Km of sucrose-phosphatase for this substrate. Both the sucrose-phosphate synthase and sucrose-phosphatase reactions are far removed from equilibrium in vivo. In wild type A. thaliana Columbia-0 leaves, all of the ADPGlc was found to be localised in the chloroplasts. ADPglucose pyrophosphorylase is localised to the chloroplast and synthesises ADPGlc from ATP and Glc1P. This distribution argues strongly against the hypothesis proposed by Pozueta-Romero and colleagues that ADPGlc for starch synthesis is produced in the cytosol via ADP-mediated cleavage of sucrose by sucrose synthase. Based on this observation and other published data it was concluded that the generally accepted pathway of starch synthesis from ADPGlc produced by ADPglucose pyrophosphorylase in the chloroplasts is correct, and that the alternative pathway is untenable. Within the pathway of starch synthesis the concentration of ADPGlc was found to be well below the Km value of starch synthase for ADPGlc, indicating that the enzyme is substrate limited. A general finding in the comparison of the Calvin-Benson cycle with the synthesis pathways of sucrose and starch is that many enzymes in the Calvin Benson cycle have active binding site concentrations that are close to the metabolite concentrations, while for nearly all enzymes in the synthesis pathways the active binding site concentrations are much lower than the metabolite concentrations.
The overall objective of the study is an elaboration of quantitative methods for national conservation planning, coincident with the international approach ('hotspots' approach). This objective requires a solution of following problems: 1) How to estimate large scale vegetation diversity from abiotic factors only? 2) How to adopt 'global hotspots' approach for bordering of national biodiversity hotspots? 3) How to set conservation targets, accounting for difference in environmental conditions and human threats between national biodiversity hotspots? 4) How to design large scale national conservation plan reflecting hierarchical nature of biodiversity? The case study for national conservation planning is Russia. Conclusions: · Large scale vegetation diversity can be predicted to a major extent by climatically determined latent heat for evaporation and geometrical structure of landscape, described as an altitudinal difference. The climate based model reproduces observed species number of vascular plant for different areas of the world with an average error 15% · National biodiversity hotspots can be mapped from biotic or abiotic data using corrected for a country the quantitative criteria for plant endemism and land use from the 'global hotspots' approach · Quantitative conservation targets, accounting for difference in environmental conditions and human threats between national biodiversity hotspots can be set using national data for Red Data book species · Large scale national conservation plan reflecting hierarchical nature of biodiversity can be designed by combination of abiotic method at national scale (identification of large scale hotspots) and biotic method at regional scale (analysis of species data from Red Data book)
Even though the structure of the plant cell wall is by and large quite well characterized, its synthesis and regulation remains largely obscure. However, it is accepted that the building blocks of the polysaccharidic part of the plant cell wall are nucleotide sugars. Thus to gain more insight into the cell wall biosynthesis, in the first part of this thesis, plant genes possibly involved in the nucleotide sugar interconversion pathway were identified using a bioinformatics approach and characterized in plants, mainly in Arabidopsis. For the computational identification profile hidden markov models were extracted from the Pfam and TIGR databases. Mainly with these, plant genes were identified facilitating the “hmmer” program. Several gene families were identified and three were further characterized, the UDP-rhamnose synthase (RHM), UDP-glucuronic acid epimerase (GAE) and the myo-inositol oxygenase (MIOX) families. For the three-membered RHM family relative ubiquitous expression was shown using variuos methods. For one of these genes, RHM2, T-DNA lines could be obtained. Moreover, the transcription of the whole family was downregulated facilitating an RNAi approach. In both cases a alteration of cell wall typic polysaccharides and developmental changes could be shown. In the case of the rhm2 mutant these were restricted to the seed or the seed mucilage, whereas the RNAi plants showed profound changes in the whole plant. In the case of the six-membered GAE family, the gene expressed to the highest level (GAE6) was cloned, expressed heterologously and its function was characterized. Thus, it could be shown that GAE6 encodes for an enzyme responsible for the conversion of UDP-glucuronic acid to UDP-galacturonic acid. However, a change in transcript level of variuos GAE family members achieved by T-DNA insertions (gae2, gae5, gae6), overexpression (GAE6) or an RNAi approach, targeting the whole family, did not reveal any robust changes in the cell wall. Contrary to the other two families the MIOX gene family had to be identified using a BLAST based approach due to the lack of enough suitable candidate genes for building a hidden markov model. An initial bioinformatic characterization was performed which will lead to further insights into this pathway. In total it was possible to identify the two gene families which are involved in the synthesis of the two pectin backbone sugars galacturonic acid and rhamnose. Moreover with the identification of the MIOX genes a genefamily, important for the supply of nucleotide sugar precursors was identified. In a second part of this thesis publicly available microarray datasets were analyzed with respect to co-responsive behavior of transcripts on a global basis using nearly 10,000 genes. The data has been made available to the community in form of a database providing additional statistical and visualization tools (http://csbdb.mpimp-golm.mpg.de). Using the framework of the database to identify nucleotide sugar converting genes indicated that co-response might be used for identification of novel genes involved in cell wall synthesis based on already known genes.
The movement of organisms has formed our planet like few other processes. Movements shape populations, communities, entire ecosystems, and guarantee fundamental ecosystem functions and services, like seed dispersal and pollination. Global, regional and local anthropogenic impacts influence animal movements across ecosystems all around the world. In particular, land-use modification, like habitat loss and fragmentation disrupt movements between habitats with profound consequences, from increased disease transmissions to reduced species richness and abundance. However, neither the influence of anthropogenic change on animal movement processes nor the resulting effects on ecosystems are well understood. Therefore, we need a coherent understanding of organismal movement processes and their underlying mechanisms to predict and prevent altered animal movements and their consequences for ecosystem functions.
In this thesis I aim at understanding the influence of anthropogenically caused land-use change on animal movement processes and their underlying mechanisms. In particular, I am interested in the synergistic influence of large-scale landscape structure and fine-scale habitat features on basic-level movement behaviours (e.g. the daily amount of time spend running, foraging, and resting) and their emerging higher-level movements (home range formation). Based on my findings, I identify the likely consequences of altered animal movements that lead to the loss of species richness and abundances.
The study system of my thesis are hares in agricultural landscapes. European brown hares (Lepus europaeus) are perfectly suited to study animal movements in agricultural landscapes, as hares are hermerophiles and prefer open habitats. They have historically thrived in agricultural landscapes, but their numbers are in decline. Agricultural areas are undergoing strong land-use changes due to increasing food demand and fast developing agricultural technologies. They are already the largest land-use class, covering 38% of the world’s terrestrial surface. To consider the relevance of a given landscape structure for animal movement behaviour I selected two differently structured agricultural landscapes – a simple landscape in Northern Germany with large fields and few landscape elements (e.g. hedges and tree stands), and a complex landscape in Southern Germany with small fields and many landscape elements.
I applied GPS devices (hourly fixes) with internal high-resolution accelerometers (4 min samples) to track hares, receiving an almost continuous observation of the animals’ behaviours via acceleration analyses. I used the spatial and behavioural information in combination with remote sensing data (normalized difference vegetation index, or NDVI, a proxy for resource availability), generating an almost complete idea of what the animal was doing when, why and where. Apart from landscape structure (represented by the two differently structured study areas), I specifically tested whether the following fine-scale habitat features influence animal movements: resource, agricultural management events, habitat diversity, and habitat structure.
My results show that, irrespective of the movement process or mechanism and the type of fine-scale habitat features, landscape structure was the overarching variable influencing hare movement behaviour. High resource variability forces hares to enlarge their home ranges, but only in the simple and not in the complex landscape. Agricultural management events result in home range shifts in both landscapes, but force hares to increase their home ranges only in the simple landscape. Also the preference of habitat patches with low vegetation and the avoidance of high vegetation, was stronger in the simple landscape. High and dense crop fields restricted hare movements temporarily to very local and small habitat patch remnants. Such insuperable barriers can separate habitat patches that were previously connected by mobile links. Hence, the transport of nutrients and genetic material is temporarily disrupted. This mechanism is also working on a global scale, as human induced changes from habitat loss and fragmentation to expanding monocultures cause a reduction in animal movements worldwide.
The mechanisms behind those findings show that higher-level movements, like increasing home ranges, emerge from underlying basic-level movements, like the behavioural modes. An increasing landscape simplicity first acts on the behavioural modes, i.e. hares run and forage more, but have less time to rest. Hence, the emergence of increased home range sizes in simple landscapes is based on an increased proportion of time running and foraging, largely due to longer travelling times between distant habitats and scarce resource items in the landscape. This relationship was especially strong during the reproductive phase, demonstrating the importance of high-quality habitat for reproduction and the need to keep up self-maintenance first, in low quality areas. These changes in movement behaviour may release a cascade of processes that start with more time being allocated to running and foraging, resulting into an increased energy expenditure and may lead to a decline in individual fitness. A decrease in individual fitness and reproductive output will ultimately affect population viability leading to local extinctions.
In conclusion, I show that landscape structure has one of the most important effects on hare movement behaviour. Synergistic effects of landscape structure, and fine-scale habitat features, first affect and modify basic-level movement behaviours, that can scales up to altered higher-level movements and may even lead to the decline of species richness and abundances, and the disruption of ecosystem functions. Understanding the connection between movement mechanisms and processes can help to predict and prevent anthropogenically induced changes in movement behaviour. With regard to the paramount importance of landscape structure, I strongly recommend to decrease the size of agricultural fields and increase crop diversity. On the small-scale, conservation policies should assure the year round provision of areas with low vegetation height and high quality forage. This could be done by generating wildflower strips and additional (semi-) natural habitat patches. This will not only help to increase the populations of European brown hares and other farmland species, but also ensure and protects the continuity of mobile links and their intrinsic value for sustaining important ecosystem functions and services.
The development of bioinspired self-assembling materials, such as hydrogels, with promising applications in cell culture, tissue engineering and drug delivery is a current focus in material science. Biogenic or bioinspired proteins and peptides are frequently used as versatile building blocks for extracellular matrix (ECM) mimicking hydrogels. However, precisely controlling and reversibly tuning the properties of these building blocks and the resulting hydrogels remains challenging. Precise control over the viscoelastic properties and self-healing abilities of hydrogels are key factors for developing intelligent materials to investigate cell matrix interactions. Thus, there is a need to develop building blocks that are self-healing, tunable and self-reporting. This thesis aims at the development of α-helical peptide building blocks, called coiled coils (CCs), which integrate these desired properties. Self-healing is a direct result of the fast self-assembly of these building blocks when used as material cross-links. Tunability is realized by means of reversible histidine (His)-metal coordination bonds. Lastly, implementing a fluorescent readout, which indicates the CC assembly state, self-reporting hydrogels are obtained.
Coiled coils are abundant protein folding motifs in Nature, which often have mechanical function, such as in myosin or fibrin. Coiled coils are superhelices made up of two or more α-helices wound around each other. The assembly of CCs is based on their repetitive sequence of seven amino acids, so-called heptads (abcdefg). Hydrophobic amino acids in the a and d position of each heptad form the core of the CC, while charged amino acids in the e and g position form ionic interactions. The solvent-exposed positions b, c and f are excellent targets for modifications since they are more variable. His-metal coordination bonds are strong, yet reversible interactions formed between the amino acid histidine and transition metal ions (e.g. Ni2+, Cu2+ or Zn2+). His-metal coordination bonds essentially contribute to the mechanical stability of various high-performance proteinaceous materials, such as spider fangs, Nereis worm jaws and mussel byssal threads. Therefore, I bioengineered reversible His-metal coordination sites into a well-characterized heterodimeric CC that served as tunable material cross-link. Specifically, I took two distinct approaches facilitating either intramolecular (Chapter 4.2) and/or intermolecular (Chapter 4.3) His-metal coordination.
Previous research suggested that force-induced CC unfolding in shear geometry starts from the points of force application. In order to tune the stability of a heterodimeric CC in shear geometry, I inserted His in the b and f position at the termini of force application (Chapter 4.2). The spacing of His is such that intra-CC His-metal coordination bonds can form to bridge one helical turn within the same helix, but also inter-CC coordination bonds are not generally excluded. Starting with Ni2+ ions, Raman spectroscopy showed that the CC maintained its helical structure and the His residues were able to coordinate Ni2+. Circular dichroism (CD) spectroscopy revealed that the melting temperature of the CC increased by 4 °C in the presence of Ni2+. Using atomic force microscope (AFM)-based single molecule force spectroscopy, the energy landscape parameters of the CC were characterized in the absence and the presence of Ni2+. His-Ni2+ coordination increased the rupture force by ~10 pN, accompanied by a decrease of the dissociation rate constant. To test if this stabilizing effect can be transferred from the single molecule level to the bulk viscoelastic material properties, the CC building block was used as a non-covalent cross-link for star-shaped poly(ethylene glycol) (star-PEG) hydrogels. Shear rheology revealed a 3-fold higher relaxation time in His-Ni2+ coordinating hydrogels compared to the hydrogel without metal ions. This stabilizing effect was fully reversible when using an excess of the metal chelator ethylenediaminetetraacetate (EDTA). The hydrogel properties were further investigated using different metal ions, i.e. Cu2+, Co2+ and Zn2+. Overall, these results suggest that Ni2+, Cu2+ and Co2+ primarily form intra-CC coordination bonds while Zn2+ also participates in inter-CC coordination bonds. This may be a direct result of its different coordination geometry.
Intermolecular His-metal coordination bonds in the terminal regions of the protein building blocks of mussel byssal threads are primarily formed by Zn2+ and were found to be intimately linked to higher-order assembly and self-healing of the thread. In the above example, the contribution of intra-CC and inter-CC His-Zn2+ cannot be disentangled. In Chapter 4.3, I redesigned the CC to prohibit the formation of intra-CC His-Zn2+ coordination bonds, focusing only on inter-CC interactions. Specifically, I inserted His in the solvent-exposed f positions of the CC to focus on the effect of metal-induced higher-order assembly of CC cross-links. Raman and CD spectroscopy revealed that this CC building block forms α-helical Zn2+ cross-linked aggregates. Using this CC as a cross-link for star-PEG hydrogels, I showed that the material properties can be switched from viscoelastic in the absence of Zn2+ to elastic-like in the presence of Zn2+. Moreover, the relaxation time of the hydrogel was tunable over three orders of magnitude when using different Zn2+:His ratios. This tunability is attributed to a progressive transformation of single CC cross-links into His-Zn2+ cross-linked aggregates, with inter-CC His-Zn2+ coordination bonds serving as an additional, cross-linking mode.
Rheological characterization of the hydrogels with inter-CC His-Zn2+ coordination raised the question whether the His-Zn2+ coordination bonds between CCs or also the CCs themselves rupture when shear strain is applied. In general, the amount of CC cross-links initially formed in the hydrogel as well as the amount of CC cross-links breaking under force remains to be elucidated. In order to more deeply probe these questions and monitor the state of the CC cross-links when force is applied, a fluorescent reporter system based on Förster resonance energy transfer (FRET) was introduced into the CC (Chapter 4.4). For this purpose, the donor-acceptor pair carboxyfluorescein and tetramethylrhodamine was used. The resulting self-reporting CC showed a FRET efficiency of 77 % in solution. Using this fluorescently labeled CC as a self-reporting, reversible cross-link in an otherwise covalently cross-linked star-PEG hydrogel enabled the detection of the FRET efficiency change under compression force. This proof-of-principle result sets the stage for implementing the fluorescently labeled CCs as molecular force sensors in non-covalently cross-linked hydrogels.
In summary, this thesis highlights that rationally designed CCs are excellent reversibly tunable, self-healing and self-reporting hydrogel cross-links with high application potential in bioengineering and biomedicine. For the first time, I demonstrated that His-metal coordination-based stabilization can be transferred from the single CC level to the bulk material with clear viscoelastic consequences. Insertion of His in specific sequence positions was used to implement a second non-covalent cross-linking mode via intermolecular His-metal coordination. This His-metal binding induced aggregation of the CCs enabled for reversibly tuning the hydrogel properties from viscoelastic to elastic-like. As a proof-of-principle to establish self-reporting CCs as material cross-links, I labeled a CC with a FRET pair. The fluorescently labelled CC acts as a molecular force sensor and first preliminary results suggest that the CC enables the detection of hydrogel cross-link failure under compression force. In the future, fluorescently labeled CC force sensors will likely not only be used as intelligent cross-links to study the failure of hydrogels but also to investigate cell-matrix interactions in 3D down to the single molecule level.